[Neuer Adapter] Homepilot20

homecineplexx

@melle110 hallo, ich hab dir eine Nachricht geschickt

Raidy007

@homecineplexx
Hey Chris Danke für deinen Adapter! Ich habe das premium gateway; wie oben beschrieben, an der IP das /hp angehangen und den bridge mode aktiviert. 7 von 8 rolladenaktoren funktionieren. Nummer 8 [Wohnzimmer-Sued] (Unterputz-Modell) wird nicht angezeigt und ich kann es natürlich dementsprechend nicht steuern. Kann ich etwas tuen, dass ich es doch steuern kann? Gibt es einen workaround oder kann ich selber etwas tuen?

Die anwort auf
%ip% /hp/v4/devices?devtype=Actuator

ist folgendes:

{"response":"get_visible_devices","devices":[{"description":"","deviceGroup":2,"did":1,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Büro","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":95},"visible":true,"deviceNumber":"10122345","uid":"405da8_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":2,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Bad","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10122345","uid":"405daa_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":3,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Garderobe","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10251530","uid":"4098b1_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":4,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Schlafzimmer","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":90},"visible":true,"deviceNumber":"10122345","uid":"405dab_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":5,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Kueche","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10122345","uid":"405dba_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":6,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Wohnzimmer-West","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10122345","uid":"405d96_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":7,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Balkon","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10122345","uid":"405dbe_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":8,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Wohnzimmer-Süd","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10941001","uid":"42eb64_1","origin":"HomePilot"}]}

Bin über jeden Hinweis dankbar!!
Lieben Dank! 🙏

homecineplexx

@raidy007 said in [Neuer Adapter] Homepilot20:

{"response":"get_visible_devices","devices":[{"description":"","deviceGroup":2,"did":1,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Büro","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":95},"visible":true,"deviceNumber":"10122345","uid":"405da8_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":2,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Bad","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10122345","uid":"405daa_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":3,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Garderobe","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10251530","uid":"4098b1_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":4,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Schlafzimmer","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":90},"visible":true,"deviceNumber":"10122345","uid":"405dab_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":5,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Kueche","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10122345","uid":"405dba_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":6,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Wohnzimmer-West","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10122345","uid":"405d96_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":7,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Balkon","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10122345","uid":"405dbe_1","origin":"HomePilot"},{"description":"","deviceGroup":2,"did":8,"hasErrors":0,"iconSetInverted":0,"iconSet":{"k":"iconset8"},"messages":[],"name":"Wohnzimmer-Süd","properties":{"closingContact":3,"dawn":3,"dusk":3,"motion":3,"rain":3,"smartphone":3,"smoke":3,"sun":3,"temperature":3,"time":3,"trigger":3,"warning":3,"wind":3},"statusValid":true,"statusesMap":{"Position":100},"visible":true,"deviceNumber":"10941001","uid":"42eb64_1","origin":"HomePilot"}]}

Guten Morgen
Naja, wenn du auf der Seite https://github.com/homecineplexx/ioBroker.homepilot20/blob/master/docs/de/doc_homepilot20_de.md unter "Unterstützte Geräte" nachschaust, wirst du das Device mit der Nummer 10941001 nicht finden. Also ganz klar das es nicht unterstützt wird.
Schick mir doch bitte mal den Link zu diesem Gerät, damit ich weiß was es für ein Teil ist und zusätzlich brauch ich noch folgenden Output von dir:
http://<homepilot ip>/devices/8

glg chris

Raidy007

@homecineplexx

Mahlzeit und vielen Dank für deine schnelle Rückmeldung. Stimmt, der steht nicht auf der Liste, aber ich hatte gehofft, er kommt vll auch (noch) mit drauf. (Kaufauswahl musste ich mich nach dem vorhandenen Motor richten, daher einfach auf Glück...) Wenn ich irgendwas nützliches dafür beisteuern kann, immer gerne!

Link zum Produkt: LINK

http://<homepilot ip>/devices/8
-> gibt ein error (ich glaube 500x) aus

http://<homepilot ip>/hp/devices/8
gibt folgendes aus:

{"error_description":"OK","error_code":0,"payload":{"device":{"capabilities":[{"name":"SET_SLAT_POS_CMD","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":-1},{"name":"INC_CMD","read_only":false,"timestamp":-1},{"name":"PROD_CODE_DEVICE_LOC","value":"10941001","read_only":false,"timestamp":-1},{"name":"GOTO_VENTIL_POS_CMD","read_only":false,"timestamp":-1},{"name":"REACHABILITY_EVT","value":"true","read_only":true,"timestamp":1716354878},{"name":"NAME_DEVICE_LOC","value":"Wohnzimmer-Süd","read_only":false,"timestamp":1715430104},{"name":"REVERS_ON_POS_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"INTF_ID_DEVICE_LOC","value":"3","read_only":false,"timestamp":-1},{"name":"REQ_STATUS_CMD","read_only":false,"timestamp":-1},{"name":"ID_DEVICE_LOC","value":"8","read_only":false,"timestamp":-1},{"name":"PROTOCOL_ID_CFG","value":"42eb64","read_only":false,"timestamp":-1},{"name":"GOTO_POS_SLAT_CMD","read_only":false,"timestamp":-1},{"name":"GOTO_POS_CMD","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":-1},{"name":"STOP_CMD","value":"false","read_only":false,"timestamp":-1},{"name":"BLOCK_DET_EVT_PUSH_TEXT","value":"","read_only":false,"timestamp":-1},{"name":"VIS_DEVICE_LOC","value":"true","read_only":false,"timestamp":-1},{"name":"BLOCK_DET_SENS_CFG","value":"2","min_value":"1","max_value":"6","step_size":"1","read_only":false,"timestamp":1716226790},{"name":"BLOCK_DET_EVT_PUSH_ENABLED","value":"false","read_only":false,"timestamp":-1},{"name":"BLOCK_DET_CFG","value":"true","read_only":false,"timestamp":1716226790},{"name":"BLOCK_DET_EVT","value":"false","read_only":true,"timestamp":1716354878},{"name":"MOTOR_REACT_TIME_CFG","value":"0","min_value":"0","max_value":"1000","step_size":"20","read_only":false,"timestamp":-1},{"name":"POS_DOWN_CMD","read_only":false,"timestamp":-1},{"name":"DESCR_DEVICE_LOC","value":"","read_only":false,"timestamp":1715430088},{"name":"REVERS_AFTER_STOP_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"CURR_POS_CFG","value":"0","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"POS_UP_CMD","read_only":false,"timestamp":-1},{"name":"VERSION_CFG","value":"4.7-2","read_only":false,"timestamp":1716354878},{"name":"SLAT_RUNTIME_CFG","value":"0.9","min_value":"0.1","max_value":"5.0","step_size":"0.1","read_only":false,"timestamp":1716354878},{"name":"RESET_WO_PAIR_CMD","read_only":false,"timestamp":-1},{"name":"PROT_ID_DEVICE_LOC","value":"42eb64_1","read_only":false,"timestamp":-1},{"name":"MOTOR_REACT_FIX_TIMES_CFG","value":"0","min_value":"0","max_value":"3","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"CURR_SLAT_POS_CFG","value":"0","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"VENTIL_POS_MODE_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"ICONSET_LOC","value":"iconset8","read_only":false,"timestamp":1715430078},{"name":"JAL_MODE_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"DEVICE_TYPE_LOC","value":"2","read_only":false,"timestamp":-1},{"name":"RUNTIME_MOTOR_CFG","value":"34","min_value":"2","max_value":"255","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"ICONSET_INV_LOC","value":"false","read_only":false,"timestamp":-1},{"name":"ROTATE_DIR_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"RMT_STOP_PAIR_CMD","read_only":false,"timestamp":-1},{"name":"VENTIL_POS_CFG","value":"80","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"RESET_FULL_CMD","read_only":false,"timestamp":-1},{"name":"PUSH_CMD","read_only":false,"timestamp":-1},{"name":"PAIRING_CONFIRMED_LOC","value":"true","read_only":false,"timestamp":-1},{"name":"RMT_START_PAIR_CMD","read_only":false,"timestamp":-1},{"name":"DFLT_SLAT_POS_CFG","value":"0","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"REVERS_ON_VENTIL_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"BLOCK_DET_REVERSING_CFG","value":"true","read_only":false,"timestamp":1716226790},{"name":"RMT_START_UNPAIR_CMD","read_only":false,"timestamp":-1},{"name":"BLOCK_DET_MOTOR_TYPE_CFG","value":"5","min_value":"1","max_value":"7","step_size":"1","read_only":false,"timestamp":1716226790},{"name":"PING_CMD","read_only":false,"timestamp":-1},{"name":"DEC_CMD","read_only":false,"timestamp":-1}],"scenes":[],"automation":[]}}}

homecineplexx

@raidy007 said in [Neuer Adapter] Homepilot20:

{"error_description":"OK","error_code":0,"payload":{"device":{"capabilities":[{"name":"SET_SLAT_POS_CMD","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":-1},{"name":"INC_CMD","read_only":false,"timestamp":-1},{"name":"PROD_CODE_DEVICE_LOC","value":"10941001","read_only":false,"timestamp":-1},{"name":"GOTO_VENTIL_POS_CMD","read_only":false,"timestamp":-1},{"name":"REACHABILITY_EVT","value":"true","read_only":true,"timestamp":1716354878},{"name":"NAME_DEVICE_LOC","value":"Wohnzimmer-Süd","read_only":false,"timestamp":1715430104},{"name":"REVERS_ON_POS_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"INTF_ID_DEVICE_LOC","value":"3","read_only":false,"timestamp":-1},{"name":"REQ_STATUS_CMD","read_only":false,"timestamp":-1},{"name":"ID_DEVICE_LOC","value":"8","read_only":false,"timestamp":-1},{"name":"PROTOCOL_ID_CFG","value":"42eb64","read_only":false,"timestamp":-1},{"name":"GOTO_POS_SLAT_CMD","read_only":false,"timestamp":-1},{"name":"GOTO_POS_CMD","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":-1},{"name":"STOP_CMD","value":"false","read_only":false,"timestamp":-1},{"name":"BLOCK_DET_EVT_PUSH_TEXT","value":"","read_only":false,"timestamp":-1},{"name":"VIS_DEVICE_LOC","value":"true","read_only":false,"timestamp":-1},{"name":"BLOCK_DET_SENS_CFG","value":"2","min_value":"1","max_value":"6","step_size":"1","read_only":false,"timestamp":1716226790},{"name":"BLOCK_DET_EVT_PUSH_ENABLED","value":"false","read_only":false,"timestamp":-1},{"name":"BLOCK_DET_CFG","value":"true","read_only":false,"timestamp":1716226790},{"name":"BLOCK_DET_EVT","value":"false","read_only":true,"timestamp":1716354878},{"name":"MOTOR_REACT_TIME_CFG","value":"0","min_value":"0","max_value":"1000","step_size":"20","read_only":false,"timestamp":-1},{"name":"POS_DOWN_CMD","read_only":false,"timestamp":-1},{"name":"DESCR_DEVICE_LOC","value":"","read_only":false,"timestamp":1715430088},{"name":"REVERS_AFTER_STOP_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"CURR_POS_CFG","value":"0","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"POS_UP_CMD","read_only":false,"timestamp":-1},{"name":"VERSION_CFG","value":"4.7-2","read_only":false,"timestamp":1716354878},{"name":"SLAT_RUNTIME_CFG","value":"0.9","min_value":"0.1","max_value":"5.0","step_size":"0.1","read_only":false,"timestamp":1716354878},{"name":"RESET_WO_PAIR_CMD","read_only":false,"timestamp":-1},{"name":"PROT_ID_DEVICE_LOC","value":"42eb64_1","read_only":false,"timestamp":-1},{"name":"MOTOR_REACT_FIX_TIMES_CFG","value":"0","min_value":"0","max_value":"3","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"CURR_SLAT_POS_CFG","value":"0","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"VENTIL_POS_MODE_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"ICONSET_LOC","value":"iconset8","read_only":false,"timestamp":1715430078},{"name":"JAL_MODE_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"DEVICE_TYPE_LOC","value":"2","read_only":false,"timestamp":-1},{"name":"RUNTIME_MOTOR_CFG","value":"34","min_value":"2","max_value":"255","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"ICONSET_INV_LOC","value":"false","read_only":false,"timestamp":-1},{"name":"ROTATE_DIR_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"RMT_STOP_PAIR_CMD","read_only":false,"timestamp":-1},{"name":"VENTIL_POS_CFG","value":"80","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"RESET_FULL_CMD","read_only":false,"timestamp":-1},{"name":"PUSH_CMD","read_only":false,"timestamp":-1},{"name":"PAIRING_CONFIRMED_LOC","value":"true","read_only":false,"timestamp":-1},{"name":"RMT_START_PAIR_CMD","read_only":false,"timestamp":-1},{"name":"DFLT_SLAT_POS_CFG","value":"0","min_value":"0","max_value":"100","step_size":"1","read_only":false,"timestamp":1716354878},{"name":"REVERS_ON_VENTIL_CFG","value":"false","read_only":false,"timestamp":1716354878},{"name":"BLOCK_DET_REVERSING_CFG","value":"true","read_only":false,"timestamp":1716226790},{"name":"RMT_START_UNPAIR_CMD","read_only":false,"timestamp":-1},{"name":"BLOCK_DET_MOTOR_TYPE_CFG","value":"5","min_value":"1","max_value":"7","step_size":"1","read_only":false,"timestamp":1716226790},{"name":"PING_CMD","read_only":false,"timestamp":-1},{"name":"DEC_CMD","read_only":false,"timestamp":-1}],"scenes":[],"automation":[]}}}

ich bau dir das ein und meld mich dann bei dir
glg

homecineplexx

@Raidy007 Hey, ich habs dir eingebaut und eine private Nachricht geschickt.
Viel Spaß damit
lg chris

Raidy007

@homecineplexx
Läuft!!!! Vielen Dank dir!

2hot4you

Hallo,

ich habe den js-controller auf die Version 6.0.1 upgedatet, jetzt läuft der Homepilot nicht mehr. Der Adapter zeigt aber grün an, es werden aber keine Daten eingelesen.
Node.js ist Version 20.14.0

homepilot.0
2024-06-10 23:02:11.288	warn	Cannot connect to Homepilot: null
homepilot.0
2024-06-10 23:01:59.307	warn	Cannot connect to Homepilot: null
homepilot.0
2024-06-10 23:01:47.284	warn	Cannot connect to Homepilot: null
homepilot.0
2024-06-10 23:01:35.451	warn	Cannot connect to Homepilot: null
homepilot.0
2024-06-10 23:01:23.295	warn	Cannot connect to Homepilot: null
homepilot.0
2024-06-10 23:01:11.280	warn	Cannot connect to Homepilot: null
homepilot.0
2024-06-10 23:00:59.280	warn	Cannot connect to Homepilot: null
homepilot.0
2024-06-10 23:00:47.280	warn	Cannot connect to Homepilot: null
homepilot.0
2024-06-10 23:00:35.397	warn	Cannot connect to Homepilot: null
homepilot.0
2024-06-10 23:00:23.289	warn	Cannot connect to Homepilot: null
homepilot.0
2024-06-10 23:00:11.237	info	starting. Version 1.2.3 in /opt/iobroker/node_modules/iobroker.homepilot, node: v20.14.0, js-controller: 6.0.1
homepilot.0
2024-06-10 23:00:07.618	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
homepilot.0
2024-06-10 23:00:07.618	info	terminating
homepilot.0
2024-06-10 23:00:07.618	info	Homepilot adapter stopped
homepilot.0
2024-06-10 23:00:07.618	info	terminating homepilot adapter
homepilot.0
2024-06-10 23:00:07.617	info	Got terminate signal TERMINATE_YOURSELF

habe auch schon den Adapter neu installiert, kein Erfolg :-(

ich kann die Homepilot Bridge anpingen und über das Webinterface bedienen, per Ipdadresse oder über homepilot.local

Ping wird ausgeführt für homepilot.local [192.168.30.171] mit 32 Bytes Daten:
Antwort von 192.168.30.171: Bytes=32 Zeit=4ms TTL=64
Antwort von 192.168.30.171: Bytes=32 Zeit=2ms TTL=64
Antwort von 192.168.30.171: Bytes=32 Zeit=2ms TTL=64
Antwort von 192.168.30.171: Bytes=32 Zeit=2ms TTL=64

Ping-Statistik für 192.168.30.171:
    Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0
    (0% Verlust),
Ca. Zeitangaben in Millisek.:
    Minimum = 2ms, Maximum = 4ms, Mittelwert = 2ms

wenn ich im Adapter die IP Adresse weg lasse bekomme ich im Log diese Meldeung

homepilot.0
2024-06-10 23:06:48.878	warn	Cannot connect to Homepilot: Error: getaddrinfo ENOTFOUND homepilot.local

Thomas Braun

@2hot4you sagte in [Neuer Adapter] Homepilot20:

Version 6.0.1 upgedatet

Beta-Version. Erkenntnisse bitte im entsprechenden Thread und im GitHub hinterlegen.

mcm1957

homepilot.local ist kein gültiger dns name. Die Domain .local ist dür mDNS reserviert und kann je nach Gerät und Softwarestand lustige Nebenwirkungen haben.

https://administrator.de/tutorial/hinweise-zur-verwendung-der-domaene-local-in-dns-und-mdns-909777511.html

Verwende mal eine "richtige" Domain oder arbeite mit fixer IP Addresse.

PS:
getaddrinfo ENOTFOUND homepilot.local
hat ziemlich sicher nichts mit js-controller 6 zu tun.

Für eine interne Addresse ist .internal als reservierter Name zu verwenden:

https://itp.cdn.icann.org/en/files/root-system/identification-tld-private-use-24-01-2024-en.pdf

2hot4you

@mcm1957

auch mit der fixen IP hat es nicht funktioniert. Habe mein Backup wieder eingespielt, jetzt geht es wieder.
Habe wieder js-controller 5.0.19 laufen

mcm1957

@2hot4you said in [Neuer Adapter] Homepilot20:

@mcm1957

auch mit der fixen IP hat es nicht funktioniert. Habe mein Backup wieder eingespielt, jetzt geht es wieder.
Habe wieder js-controller 5.0.19 laufen

Und ein Issue im js-controller 6 Tester Thread hast du hoffentlich auch gemacht.

Semenchkare

@2hot4you
das Problem ist nicht der js-controller 6.x, sondern nodejs 20.14.0. Die ist für den Absturz verantwortlich.
Ich habe das Problem auch, nicht nur mit dieser App, sondern auch bei plexconnect....
Mir ist klar, dass nodejs 18.x empfohlen wird.
Dennoch soll das hier ein Hinweis für die Entwickler sein (hat nodejs 20.x Fehler? Muss der Adapter angepasst werden?

LG
Seme

Wildbill

@semenchkare Also erstens ist Node 18 nicht mehr empfohlen, sondern Node 20. Und zweitens läuft der Adapter bei mir mit Node 20.14.0 und JS-Controller 5.0.19 vällig problemlos. Dann scheint es wohl nicht an Node sondern am JS-Controller 6.xx zu liegen?!

Gruss, Jürgen

mcm1957

@wildbill
Verwendest du ne Domain oder die IP?
Domain .local ist m.E. nach wie vor 'verdächtig'.

Ansonsten gilt wie immer ohne issue bzw Eintrag im jsc6 Topic wird dasjenige geschenkt.

Wildbill

@mcm1957 Ich habe in der Instanz direkt die IP eingetragen, da ich mit VLAN arbeite und ich so direkt steuern kann, welcher der virtuellen Netzwerkadapter von iobroker (der hat unter Proxmox mehrere in den verschiedenen VLAN) die Verbindung aufnehmen soll.
Ich verwende im Smarthome eigentlich generell die IP-Adressen.

Gruss, Jürgen

mcm1957

@wildbill
Danke
Dann bleib ich bei der Aussage dass .local das vermutlich Problem ist. Leicht möglich dass node 20 da was verändert hat .local ist eine Sonderdomain und sollte nicht mit normalem dns verwendet werden

Siehe link weiter oben

Wildbill

@mcm1957 Gut möglich.
@2hot4you Trag mal die IP direkt ein anstatt Domain und teste nochmal.

Gruss, Jürgen

Semenchkare

@wildbill OK. habe gerade auf die 6.04 upgedatet, noch gleicher Fehler.

hier mal das Protokoll beim Start

host.iobroker
	2024-06-13 19:35:59.166	info	Restart adapter system.adapter.homepilot20.0 because enabled
host.iobroker
	2024-06-13 19:35:59.166	error	instance system.adapter.homepilot20.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
host.iobroker
	2024-06-13 19:35:59.165	error	Caught by controller[0]: Node.js v20.14.0
host.iobroker
	2024-06-13 19:35:59.165	error	Caught by controller[0]: at node:internal/main/run_main_module:28:49
host.iobroker
	2024-06-13 19:35:59.165	error	Caught by controller[0]: at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:174:12)
host.iobroker
	2024-06-13 19:35:59.165	error	Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:1024:12)
host.iobroker
	2024-06-13 19:35:59.165	error	Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1208:32)
host.iobroker
	2024-06-13 19:35:59.165	error	Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1416:10)
host.iobroker
	2024-06-13 19:35:59.165	error	Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1358:14)
host.iobroker
	2024-06-13 19:35:59.164	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.homepilot20/main.js:2721:5)
host.iobroker
	2024-06-13 19:35:59.164	error	Caught by controller[0]: at startAdapter (/opt/iobroker/node_modules/iobroker.homepilot20/main.js:66:12)
host.iobroker
	2024-06-13 19:35:59.164	error	Caught by controller[0]: TypeError: utils.Adapter is not a constructor
host.iobroker
	2024-06-13 19:35:59.164	error	Caught by controller[0]: ^
host.iobroker
	2024-06-13 19:35:59.164	error	Caught by controller[0]: adapter = new utils.Adapter(options);
host.iobroker
	2024-06-13 19:35:59.163	error	Caught by controller[0]: /opt/iobroker/node_modules/iobroker.homepilot20/main.js:66

mcm1957

@semenchkare

Wenn ich das richtig sehe ist der Adapter homepilot 20 NICHT im Repository gelistet.
Bitte den Dev kontatieren dmit dieser den Adapter an js-controlelr 6 anpasst.

Die Dependencies sind total veraltet - offenbar benutzt der Dev auch keine dependabot. Da der Adapter nicht im repository gelistet ist wurde auch auch keinem Grobreview unterzogen. Der Adapter kann daher (muss aber ntürlich nicht=) noch andere Probleme beinhalten. Da der Adapetr auch die standardmäßigen Github Tests nicht benutzt knn ü bder den notwendigen Anpasungsumfang nichts gesagt werden.

Ich bin hier dann mal raus - bitet an den Dev des Adapters wenden. Sollte dieser Fragen haben, bitte m Telegramm Developer Channel melden.

Der Vollständigkeit halber:

Von direkten Installation von GitHub - insbesondere auf produktiven Systemen - wird explizit abgeraten. GitHub Versionen können sich jederzeit (auch kurzfristig) ändern und durchaus auch in sich inkonsistent und fehlerhaft sein. Versionsangaben von GitHub Installationen sind Schall und Rauch da die Versionsnummer zumindest bei Verwendung der standardmäßigen Umgebung erst im Zuge der Releaseerstellung geändert wird.

Auf explizite Aufforderung durch den Entwickler kann eine GitHub Installation zur Fehlereingrenzung oder zum Test neuer Funktionalität - unter Inkaufnahme des erhöhten Risikos - natürlich erfolgen.

Adapter die nur via GitHub installierbar sind sind mit erhöhter Vorsicht zu betrachten. Hier sollte der Entwickler drum ersucht werden eine Aufnahme in die Repositories zu veranlassen indem z.B. ein Issue im Adapterrepository erstellt wird.

Community Forum

NEWS

[Neuer Adapter] Homepilot20

Support us

508

32.5k

81.8k

1.3m