SONOFF NSPanel mit Lovelace UI
-
- Nicht das ich wüsste. Wie kann ich das prüfen?
- Hab das entsprechende Blockly eigentlich deaktiviert. Falls trotzdem irgendwas das Relais ansteuert, hätte ich ein Hinweis in der Console erwartet. Oder is das falsch?
- Nein, sagt mir ebenfalls nichts.
08:22:26.173 CMD: status0 08:22:26.219 MQT: Thermostate/stat/nspanel_FA4E78/STATUS0 = {"Status":{"Module":0,"DeviceName":"Tasmota","FriendlyName":["Tasmota",""],"Topic":"nspanel_FA4E78","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0},"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota32/release/tasmota32-nspanel.bin","RestartReason":"Software reset CPU","Uptime":"0T13:07:41","StartupUTC":"2024-01-12T18:14:45","Sleep":0,"CfgHolder":4617,"BootCount":37,"BCResetTime":"2023-04-07T08:56:11","SaveCount":844},"StatusFWR":{"Version":"13.3.0(nspanel)","BuildDateTime":"2023-12-12T14:31:39","Core":"2_0_14","SDK":"4.4.6.231122","CpuFrequency":160,"Hardware":"ESP32-D0WD-V3 v3.0","CR":"456/699"},"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Fritz!repeater",""],"TelePeriod":10,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00800080","00006000","00004000","00000000"]},"StatusMEM":{"ProgramSize":1888,"Free":863,"Heap":131,"StackLowMark":4,"PsrMax":0,"PsrFree":0,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"16405E","FlashFrequency":40,"FlashMode":"DIO","Features":["0809","9F9AD7DF","0015A001","B7F7BFCF","05DA9BC4","E0360DC7","480840D2","20200000","D4BC482D","810A80B1","00000000"],"Drivers":"1,2,3,4,5,7,8,9,10,11,12,14,16,17,20,21,24,26,27,29,34,35,38,50,52,59,60,62,63,66,67,68,82,86,87,88","Sensors":"1,2,3,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,64,66,67,74,85,92,95,98,103,105,109,127","I2CDriver":"7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,58,62,65,69,76,77,82"},"StatusNET":{"Hostname":"nspanel-FA4E78-3704","IPAddress":"192.168.188.96","Gateway":"192.168.188.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.188.1","DNSServer2":"2a02:6d40:36e7:9701:464e:6dff:feb7:9eee","Mac":"C0:49:EF:FA:4E:78","IP6Global":"2a02:6d40:36e7:9701:c249:efff:fefa:4e78","IP6Local":"fe80::c249:efff:fefa:4e78%st2","Ethernet":{"Hostname":"","IPAddress":"0.0.0.0","Gateway":"0.0.0.0","Subnetmask":"0.0.0.0","DNSServer1":"192.168.188.1","DNSServer2":"2a02:6d40:36e7:9701:464e:6dff:feb7:9eee","Mac":"00:00:00:00:00:00","IP6Global":"","IP6Local":""},"Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0},"StatusMQT":{"MqttHost":"192.168.188.222","MqttPort":1883,"MqttClientMask":"ThermostatKueche","MqttClient":"ThermostatKueche","MqttUser":"mqtt","MqttCount":2,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4},"StatusTIM":{"UTC":"2024-01-13T07:22:26","Local":"2024-01-13T08:22:26","StartDST":"2024-03-31T02:00:00","EndDST":"2024-10-27T03:00:00","Timezone":"+01:00","Sunrise":"08:40","Sunset":"17:17"},"StatusSNS":{"Time":"2024-01-13T08:22:26","ANALOG":{"Temperature1":20.6},"TempUnit":"C"},"StatusSTS":{"Time":"2024-01-13T08:22:26","Uptime":"0T13:07:41","UptimeSec":47261,"Heap":129,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":2,"Berry":{"HeapUsed":16,"Objects":218},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Fritz!repeater","BSSId":"2C:91:AB:E1:FE:EA","Channel":6,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":1,"Downtime":"0T00:00:05"}}} 08:22:29.190 MQT: Thermostate/stat/nspanel_FA4E78/RESULT = {"CustomSend":"Done"} 08:22:29.246 MQT: Thermostate/stat/nspanel_FA4E78/RESULT = {"CustomSend":"Done"} 08:22:35.848 MQT: Thermostate/tele/nspanel_FA4E78/STATE = {"Time":"2024-01-13T08:22:35","Uptime":"0T13:07:50","UptimeSec":47270,"Heap":126,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":2,"Berry":{"HeapUsed":16,"Objects":218},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Fritz!repeater","BSSId":"2C:91:AB:E1:FE:EA","Channel":6,"Mode":"11n","RSSI":78,"Signal":-61,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:22:35.865 MQT: Thermostate/tele/nspanel_FA4E78/SENSOR = {"Time":"2024-01-13T08:22:35","ANALOG":{"Temperature1":20.5},"TempUnit":"C"} 08:22:45.846 MQT: Thermostate/tele/nspanel_FA4E78/STATE = {"Time":"2024-01-13T08:22:45","Uptime":"0T13:08:00","UptimeSec":47280,"Heap":133,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":2,"Berry":{"HeapUsed":16,"Objects":218},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Fritz!repeater","BSSId":"2C:91:AB:E1:FE:EA","Channel":6,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:22:45.862 MQT: Thermostate/tele/nspanel_FA4E78/SENSOR = {"Time":"2024-01-13T08:22:45","ANALOG":{"Temperature1":20.5},"TempUnit":"C"} 08:22:55.846 MQT: Thermostate/tele/nspanel_FA4E78/STATE = {"Time":"2024-01-13T08:22:55","Uptime":"0T13:08:10","UptimeSec":47290,"Heap":133,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":2,"Berry":{"HeapUsed":16,"Objects":218},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Fritz!repeater","BSSId":"2C:91:AB:E1:FE:EA","Channel":6,"Mode":"11n","RSSI":78,"Signal":-61,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:22:55.866 MQT: Thermostate/tele/nspanel_FA4E78/SENSOR = {"Time":"2024-01-13T08:22:55","ANALOG":{"Temperature1":20.5},"TempUnit":"C"} 08:22:59.183 MQT: Thermostate/stat/nspanel_FA4E78/RESULT = {"CustomSend":"Done"} 08:22:59.295 MQT: Thermostate/stat/nspanel_FA4E78/RESULT = {"CustomSend":"Done"} 08:22:59.356 MQT: Thermostate/stat/nspanel_FA4E78/RESULT = {"CustomSend":"Done"} 08:23:05.848 MQT: Thermostate/tele/nspanel_FA4E78/STATE = {"Time":"2024-01-13T08:23:05","Uptime":"0T13:08:20","UptimeSec":47300,"Heap":126,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":2,"Berry":{"HeapUsed":16,"Objects":218},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Fritz!repeater","BSSId":"2C:91:AB:E1:FE:EA","Channel":6,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:23:05.866 MQT: Thermostate/tele/nspanel_FA4E78/SENSOR = {"Time":"2024-01-13T08:23:05","ANALOG":{"Temperature1":20.5},"TempUnit":"C"} 08:23:15.847 MQT: Thermostate/tele/nspanel_FA4E78/STATE = {"Time":"2024-01-13T08:23:15","Uptime":"0T13:08:30","UptimeSec":47310,"Heap":134,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":2,"Berry":{"HeapUsed":16,"Objects":218},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Fritz!repeater","BSSId":"2C:91:AB:E1:FE:EA","Channel":6,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:23:15.859 MQT: Thermostate/tele/nspanel_FA4E78/SENSOR = {"Time":"2024-01-13T08:23:15","ANALOG":{"Temperature1":20.5},"TempUnit":"C"}08:25:12.863 CMD: Grp 0, Cmd 'CUSTOMSEND', Idx 1, Len 41, Pld -99, Data 'statusUpdate~梅20.5°~64332~~17299~~~' 08:25:12.897 NXP: payload sent = bytes('55BB29007374617475735570646174657EEFA98432302E35C2B07E3634333332...') 08:25:12.903 MQT: Thermostate/stat/nspanel_FA4E78/RESULT = {"CustomSend":"Done"} 08:25:13.104 HTP: Command 08:25:13.111 SRC: WebCommand from 0.0.0.0 08:25:13.113 CMD: Grp 0, Cmd 'POWER', Idx 1, Len 4, Pld 1, Data 'true' 08:25:13.125 MQT: Thermostate/stat/nspanel_FA4E78/RESULT = {"POWER1":"ON"} 08:25:13.128 MQT: Thermostate/stat/nspanel_FA4E78/POWER1 = ON 08:25:13.719 CFG: Saved, Count 846, Bytes 4096 08:25:15.847 MQT: Thermostate/tele/nspanel_FA4E78/STATE = {"Time":"2024-01-13T08:25:15","Uptime":"0T13:10:30","UptimeSec":47430,"Heap":129,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":2,"Berry":{"HeapUsed":16,"Objects":218},"POWER1":"ON","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Fritz!repeater","BSSId":"2C:91:AB:E1:FE:EA","Channel":6,"Mode":"11n","RSSI":78,"Signal":-61,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:25:15.858 MQT: Thermostate/tele/nspanel_FA4E78/SENSOR = {"Time":"2024-01-13T08:25:15","ANALOG":{"Temperature1":20.5},"TempUnit":"C"} 08:25:25.848 MQT: Thermostate/tele/nspanel_FA4E78/STATE = {"Time":"2024-01-13T08:25:25","Uptime":"0T13:10:40","UptimeSec":47440,"Heap":134,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":2,"Berry":{"HeapUsed":16,"Objects":218},"POWER1":"ON","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Fritz!repeater","BSSId":"2C:91:AB:E1:FE:EA","Channel":6,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":1,"Downtime":"0T00:00:05"}} 08:25:25.863 MQT: Thermostate/tele/nspanel_FA4E78/SENSOR = {"Time":"2024-01-13T08:25:25","ANALOG":{"Temperature1":20.6},"TempUnit":"C"} 08:25:25.953 HTP: Command 08:25:25.959 SRC: WebCommand from 0.0.0.0 08:25:25.961 CMD: Grp 0, Cmd 'POWER', Idx 1, Len 5, Pld 0, Data 'false' 08:25:25.974 MQT: Thermostate/stat/nspanel_FA4E78/RESULT = {"POWER1":"OFF"} 08:25:25.980 MQT: Thermostate/stat/nspanel_FA4E78/POWER1 = OFF 08:25:26.041 SRC: MQTTund hier das Blockly
v7.1.6 BlocklyJavascriptTypeScriptRules Skript läuft nicht 08:27:26.697 info javascript.0 (243) Stop script script.js.NSPanels.cardTherm Ausgewählte Blöcke exportieren <xml xmlns="https://developers.google.com/blockly/xml"> <block type="on_ext" id="f5Bid}p|/9GT(RD6+VvN" x="12" y="63"> <mutation xmlns="http://www.w3.org/1999/xhtml" items="1"></mutation> <field name="CONDITION">ne</field> <field name="ACK_CONDITION"></field> <value name="OID0"> <shadow type="field_oid" id="`r{2K%U)7zl).bayEI~^"> <field name="oid">alias.0.NSPanel.1.Sensor.ANALOG.Temperature.ACTUAL</field> </shadow> <block type="field_oid" id="U:J`M6C4H1J{*Q~bTz3y"> <field name="oid">alias.0.NSPanels.Thermostat_Kueche.ACTUAL</field> </block> </value> <statement name="STATEMENT"> <block type="controls_if" id="X2LSI}+Zi#M|IV$#WL@)"> <mutation else="1"></mutation> <value name="IF0"> <block type="logic_compare" id="M_JR1J!hC6l{=7#)}t;o"> <field name="OP">LT</field> <value name="A"> <block type="math_arithmetic" id="SSzhQfC0#lj$jKI`rAL2"> <field name="OP">ADD</field> <value name="A"> <shadow type="math_number" id="Cnu[3+X8C-i4aI$f[LLZ"> <field name="NUM">1</field> </shadow> <block type="get_value" id="s.Y#A[ZI%3V6pQ|$D~2("> <field name="ATTR">val</field> <field name="OID">alias.0.NSPanels.Thermostat_Kueche.SET</field> </block> </value> <value name="B"> <shadow type="math_number" id=";4Bs+8_Bf_~s5BGTL2Zm"> <field name="NUM">1</field> </shadow> <block type="math_number" id="FW,V;B.:ZT`12]|[R69}"> <field name="NUM">1</field> </block> </value> </block> </value> <value name="B"> <block type="get_value" id="9FRly,]ESm(#7Ahr9$Oq"> <field name="ATTR">val</field> <field name="OID">alias.0.NSPanels.Thermostat_Kueche.ACTUAL</field> </block> </value> </block> </value> <statement name="DO0"> <block type="control" id="ZBrHe-!=-7{XHEgZ[kKP"> <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation> <field name="OID">alias.0.NSPanels.Thermostat_Kueche.POWER</field> <field name="WITH_DELAY">FALSE</field> <value name="VALUE"> <block type="logic_boolean" id="$!/V_Bz[$]FKapjGf7j#"> <field name="BOOL">TRUE</field> </block> </value> </block> </statement> <statement name="ELSE"> <block type="control" id="7O!kH0aC)ojZQ27T:i~3"> <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation> <field name="OID">alias.0.NSPanels.Thermostat_Kueche.POWER</field> <field name="WITH_DELAY">FALSE</field> <value name="VALUE"> <block type="logic_boolean" id="^]R@F(rwWETa1P_SMi:W"> <field name="BOOL">FALSE</field> </block> </value> </block> </statement> </block> </statement> </block> </xml> <xml xmlns="https://developers.google.com/blockly/xml"> <block type="on_ext" id="f5Bid}p|/9GT(RD6+VvN" x="12" y="63"> <mutation xmlns="http://www.w3.org/1999/xhtml" items="1"></mutation> <field name="CONDITION">ne</field> <field name="ACK_CONDITION"></field> <value name="OID0"> <shadow type="field_oid" id="`r{2K%U)7zl).bayEI~^"> <field name="oid">alias.0.NSPanel.1.Sensor.ANALOG.Temperature.ACTUAL</field> </shadow> <block type="field_oid" id="U:J`M6C4H1J{*Q~bTz3y"> <field name="oid">alias.0.NSPanels.Thermostat_Kueche.ACTUAL</field> </block> </value> <statement name="STATEMENT"> <block type="controls_if" id="X2LSI}+Zi#M|IV$#WL@)"> <mutation else="1"></mutation> <value name="IF0"> <block type="logic_compare" id="M_JR1J!hC6l{=7#)}t;o"> <field name="OP">LT</field> <value name="A"> <block type="math_arithmetic" id="SSzhQfC0#lj$jKI`rAL2"> <field name="OP">ADD</field> <value name="A"> <shadow type="math_number" id="Cnu[3+X8C-i4aI$f[LLZ"> <field name="NUM">1</field> </shadow> <block type="get_value" id="s.Y#A[ZI%3V6pQ|$D~2("> <field name="ATTR">val</field> <field name="OID">alias.0.NSPanels.Thermostat_Kueche.SET</field> </block> </value> <value name="B"> <shadow type="math_number" id=";4Bs+8_Bf_~s5BGTL2Zm"> <field name="NUM">1</field> </shadow> <block type="math_number" id="FW,V;B.:ZT`12]|[R69}"> <field name="NUM">1</field> </block> </value> </block> </value> <value name="B"> <block type="get_value" id="9FRly,]ESm(#7Ahr9$Oq"> <field name="ATTR">val</field> <field name="OID">alias.0.NSPanels.Thermostat_Kueche.ACTUAL</field> </block> </value> </block> </value> <statement name="DO0"> <block type="control" id="ZBrHe-!=-7{XHEgZ[kKP"> <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation> <field name="OID">alias.0.NSPanels.Thermostat_Kueche.POWER</field> <field name="WITH_DELAY">FALSE</field> <value name="VALUE"> <block type="logic_boolean" id="$!/V_Bz[$]FKapjGf7j#"> <field name="BOOL">TRUE</field> </block> </value> </block> </statement> <statement name="ELSE"> <block type="control" id="7O!kH0aC)ojZQ27T:i~3"> <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation> <field name="OID">alias.0.NSPanels.Thermostat_Kueche.POWER</field> <field name="WITH_DELAY">FALSE</field> <value name="VALUE"> <block type="logic_boolean" id="^]R@F(rwWETa1P_SMi:W"> <field name="BOOL">FALSE</field> </block> </value> </block> </statement> </block> </statement> </block> </xml> -
@eierfeile hm, hab gerade gesehen, dass das Blockly wieder aktiv war. Hab es deaktiviert, jetzt schaltet es sich zumindest nicht mehr von alleine aus. Gestern ist das aber trotz deaktviertem Blockly passiert. Hm muss mir das heute abend nochmal anschauen. Muss jetzt leider los.
-
Status0 ist okay... ggfs. mal:
- die TelePeriod von 10 nach z.B. 60 erhöhen
- die ESP-Temp mit
SetOption146 1aktivieren - ggfs. (Tasmota) Friendly Name 2 ebenfalls setzen
Das Blockly kann ich nicht importieren. Kommt bei mir:
Ggfs mal als Bild senden... und/oder den JS-Code hier posten...
Wenn es sporadisch ist, dann bitte den ioBroker einmal durchstarten. Scripte können auch mal im Hintergrund weiterlaufen, obwohl alles korrekt angezeigt wird.
Auch mal prüfen, ob ein ggfs. weiteres Script einen Trigger auf das Relais hat.
Falls trotzdem irgendwas das Relais ansteuert, hätte ich ein Hinweis in der Console erwartet. Oder is das falsch?
Ja ist falsch. Das Log füllt sich ja nur, wenn du den Debug Baustein im Blockly verwendest oder im NSPanelTs.ts
Debug = trueeinstellst. Da das aber ein separater Trigger auf einem Datenpunkt (also eine Schnittstelle) im NSPanel-Verzeichnis ist, wird der nur protokollieren, dass der Trigger ausgelöst hat, aber nicht, welches Blockly das verursacht hat...Nicht das ich wüsste. Wie kann ich das prüfen?
in dem du PulseTime in der Tasmota Konsole eingibst:12:00:02.443 CMD: PulseTime 12:00:02.456 MQT: SmartHome/NSPanel_1/stat/RESULT = {"PulseTime":{"Set":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"Remaining":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]}} -
Das Debug im Skript wird von dem Debug im Datenpunkt überschrieben.
-
Hallo zusammen,
auch wenn es nicht ganz zu eurer Diskussion passt, möchte ich doch an dieser Stelle mal fragen wie man Lovelace UI wieder deinstalliert bekommt.
Ich habe viel damit experimentiert, kam aber auch aufgrund fehlender Zeit zu keinem zufriedenstellenden Ergebnis. Jetzt möchte ich das NS Panel gerne erst mal wieder nur mit Tasmota, ohne Lovelace UI betreiben. Wie komme ich da wieder hin?
Und wenn ich schon dabei bin zu fragen, je nachdem würde ich das Panel auch wieder verkaufen wollen, gibt es eine Möglichkeit die Sonoff Stock FW wieder drauf zu flashen bzw wo bekomme ich die her ohne ein Backup?
Danke für eure Hilfe. -
@kugelblitz Ist das panel weiß? Vielleicht kauft das hier auch jemand ab und freut sich das es nicht stock ist
-
@emd Nein, es ist schwarz.
-
Update v4.3.3.36
Wenn aktuelle Version ab v4.3.3.30, dann unteren Teil des NSPanelTs.ts ab:
// ________________ DE: Ab hier keine Konfiguration mehr _______________austauschen
https://github.com/joBr99/nspanel-lovelace-ui/blob/main/ioBroker/NsPanelTs.ts
Wenn aktuelle Version bis v4.3.3.29, dann Updateaneitung befolgen:
https://github.com/joBr99/nspanel-lovelace-ui/wiki/NSPanel-Starthilfe-FAQ#hilfe-bei-update--upgrade -
Hallo zusammen,
ich kann bei mir reproduzierbar das Panel aufhängen indem ich folgendes mache:
setState(panelId + ".popupNotify.popupNotifyHeading", ''); setState(panelId + ".popupNotify.popupNotifyText", '');Äußern tut sich das bei mir insofern, dass ich nach dem Bestätigen ein Clear von
HeadingundTextmache, weil ich das dann wieder schön aufgeräumt haben will^^Getestet mit V4.3.3.30
-
hehe
- der Leerzeichen MonkDann weiß du ja auch, dass du in den popupNotifyText kein '' bis zur nächsten Erweiterung schreiben solltest.
Oder halt nochmal "OK" drücken. Das Icon und den Button könntest du ja auch noch löschen
Können da eine Erweiterung einbauen, dass wenn Heading und Text leer sind, kein Popup initiiert wird.
-
Kannst die v4.3.3.37 Version aus dem DEV nutzen:
https://github.com/joBr99/nspanel-lovelace-ui/blob/e94c711f123c3f0ecfed075f3bd9143df61c6890/ioBroker/DEV/NSPanelTs.tsDamit kannst du die Texte aus dem popupNotify wieder bereinigen
Ist dann in den kommenden Versionen ebenfalls enthalten...
-
@armilar Passt, ich danke dir!
-
Also ich komme mit dem Abfallkalender nicht weiter.
Hab alles den in google als separaten Kalender.
Dann folgende Settings im trashschedule
Habe dann das bereitgestellte Blockly genommen, welches die Datenpunkte in userdata0 und die alias anlegt
und auch dieses probiert.
Hier kommts dann zu dem ersten Fehler. Da gehts es wahrscheinlich aber auch nur um Color, oder?
javascript.0 2024-01-15 22:22:58.748 info State value to set for "0_userdata.0.Abfallkalender.4.color" has to be type "number" but received type "object" javascript.0 2024-01-15 22:22:58.748 info State value to set for "0_userdata.0.Abfallkalender.3.color" has to be type "number" but received type "object" javascript.0 2024-01-15 22:22:58.747 info State value to set for "0_userdata.0.Abfallkalender.2.color" has to be type "number" but received type "object" javascript.0 2024-01-15 22:22:58.746 info State value to set for "0_userdata.0.Abfallkalender.1.color" has to be type "number" but received type "object" javascript.0 2024-01-15 22:22:58.739 info script.js.common.Abfallkalender: Daten vom ical Adapter werden ausgewertet javascript.0 2024-01-15 22:22:58.738 info script.js.common.Abfallkalender: Daten vom ical Adapter werden ausgewertet javascript.0 2024-01-15 22:22:58.738 info script.js.common.Abfallkalender: Daten vom ical Adapter werden ausgewertet javascript.0 2024-01-15 22:22:58.738 info script.js.common.Abfallkalender: Daten vom ical Adapter werden ausgewertet javascript.0 2024-01-15 22:22:58.737 info script.js.common.Abfallkalender: Daten vom ical Adapter werden ausgewertetDes weiteren setzt er die dann als alias auch falsch.
-
gelöscht - Thema verfehlt
-
@marko1974
du kannst das Script aus meinem Github nehmen. Es legt dir alle Datenpunkte in 0_userdata und alias an und greift die Daten von iCal Adapter ab.
Mit dem "Debug-Modus" bekommst du vom Script mehr informationen zu den Fehlern bei den Daten. Einfach die Konstante "debug" im Script auf true setzen.const debug= true;Der link zu meinem Github
PS: das Blockly muss ich mal prüfen.
-
@tt-tom Hi! Es ist ja sogar Dein Script
...da haut er mit bei color immer das Ack:false rein -
@marko1974
das Blockly ist nicht vom mir. Hast du das Script von Github neu aufgesetzt. -
@tt-tom ja ich habe nun NUR Dein script genommen
-
@marko1974
okay dann setze bitte im Script mal debug auf true.
zeige mal den Config vom Script. -
avascript.0 (1379) script.js.common.Abfallkalender: Rohdaten von Instanz ical: [{"date":"In 4 Tagen ","event":"USB Abfuhr Blau - Altpapier","_class":"ical_Müllkalender ical_4days","_date":"2024-01-18T23:00:00.000Z","_end":"2024-01-19T23:00:00.000Z","_section":"USB Umweltservice Bochum GmbH\nHanielstraße 1\n44801 Bochum\n\nTelefon: 0234/33 36-0\nFax: 0234/33 36-109","_IDID":"170526840926@muellmax.de","_allDay":true,"_private":false,"_rule":" ","location":"4481","_calName":"Müllkalender","_calColor":"#000000","_object":{"type":"VEVENT","params":[],"start":"2024-01-18T23:00:00.000Z","datetype":"date","end":"2024-01-19T23:00:00.000Z","dtstamp":"2024-01-15T22:30:07.000Z","uid":"170526840926@muellmax.de","url":"http://www.muellmax.de","class":"PUBLIC","created":"2024-01-14T21:40:09.000Z","description":"USB Umweltservice Bochum GmbH\nHanielstraße 1\n44801 Bochum\n\nTelefon: 0234/33 36-0\nFax: 0234/33 36-109","lastmodified":"2024-01-15T20:21:38.000Z","location":"448xxx31","sequence":"0","status":"CONFIRMED","summary":"USB Abfuhr Blau - Altpapier","transparency":"TRANSPARENT","method":"PUBLISH"}},{"date":"In einer Woche ","event":"USB Abfuhr Grau - Restmüll","_class":"ical_Müllkalender ical_oneweek","_date":"2024-01-21T23:00:00.000Z","_end":"2024-01-22T23:00:00.000Z","_section":"USB Umweltservice Bochum GmbH\nHanielstraße 1\n44801 Bochum\n\nTelefon: 0234/33 36-0\nFax: 0234/33 36-109","_IDID":"17052684091@muellmax.de","_allDay":true,"_private":false,"_rule":" ","location":"44879 Bochum-Dahlhausen, ","_calName":"Müllkalender","_calColor":"#000000","_object":{"type":"VEVENT","params":[],"start":"2024-01-21T23:00:00.000Z","datetype":"date","end":"2024-01-22T23:00:00.000Z","dtstamp":"2024-01-15T22:30:07.000Z","uid":"17052684091@muellmax.de","url":"http://www.muellmax.de","class":"PUBLIC","created":"2024-01-14T21:40:09.000Z","description":"USB Umweltservice Bochum GmbH\nHanielstraße 1\n44801 Bochum\n\nTelefon: 0234/33 36-0\nFax: 0234/33 36-109","lastmodified":"2024-01-15T20:21:38.000Z","location":"431","sequence":"0","status":"CONFIRMED","summary":"USB Abfuhr Grau - Restmüll","transparency":"TRANSPARENT","method":"PUBLISH"}},{"date":"In einer Woche ","event":"USB Abfuhr Gelb - kombinierte Wertstofftonne","_class":"ical_Müllkalender ical_oneweek","_date":"2024-01-21T23:00:00.000Z","_end":"2024-01-22T23:00:00.000Z","_section":"USB Umweltservice Bochum GmbH\nHanielstraße 1\n44801 Bochum\n\nTelefon: 0234/33 36-0\nFax: 0234/33 36-109","_IDID":"170526840939@muellmax.de","_allDay":true,"_private":false,"_rule":" ","location":"448","_calName":"Müllkalender","_calColor":"#000000","_object":{"type":"VEVENT","params":[],"start":"2024-01-21T23:00:00.000Z","datetype":"date","end":"2024-01-22T23:00:00.000Z","dtstamp":"2024-01-15T22:30:07.000Z","uid":"170526840939@muellmax.de","url":"http://www.muellmax.de","class":"PUBLIC","created":"2024-01-14T21:40:09.000Z","description":"USB Umweltservice Bochum GmbH\nHanielstraße 1\n44801 Bochum\n\nTelefon: 0234/33 36-0\nFax: 0234/33 36-109","lastmodified":"2024-01-15T20:21:38.000Z","location":"31","sequence":"0","status":"CONFIRMED","summary":"USB Abfuhr Gelb - kombinierte Wertstofftonne","transparency":"TRANSPARENT","method":"PUBLISH"}},{"date":"05.02.2024 ","event":"USB Abfuhr Grau - Restmüll","_class":"ical_Müllkalender ","_date":"2024-02-04T23:00:00.000Z","_end":"2024-02-05T23:00:00.000Z","_section":"USB Umweltservice Bochum GmbH\nHanielstraße 1\n44801 Bochum\n\nTelefon: 0234/33 36-0\nFax: 0234/33 36-109","_IDID":"17052684092@muellmax.de","_allDay":true,"_private":false,"_rule":" ","location":"44879 1","_calName":"Müllkalender","_calColor":"#000000","_object":{"type":"VEVENT","params":[],"start":"2024-02-04T23:00:00.000Z","datetype":"date","end":"2024-02-05T23:00:00.000Z","dtstamp":"2024-01-15T22:30:07.000Z","uid":"17052684092@muellmax.de","url":"http://www.muellmax.de","class":"PUBLIC","created":"2024-01-14T21:40:09.000Z","description":"USB Umweltservice Bochum GmbH\nHanielstraße 1\n44801 Bochum\n\nTelefon: 0234/33 36-0\nFax: 0234/33 36-109","lastmodified":"2024-01-15T20:21:38.000Z","location":"31","sequence":"0","status":"CONFIRMED","summary":"USB Abfuhr Grau - Restmüll","transparency":"TRANSPARENT","method":"PUBLISH"}},{"date":"05.02.2024 ","event":"USB Abfuhr Gelb - kombinierte Wertstofftonne","_class":"ical_Müllkalender ","_date":"2024-02-04T23:00:00.000Z","_end":"2024-02-05T23:00:00.000Z","_section":"USB Umweltservice Bochum GmbH\nHanielstraße 1\n44801 Bochum\n\nTelefon: 0234/33 36-0\nFax: 0234/33 36-109","_IDID":"170526840940@muellmax.de","_allDay":true,"_private":false,"_rule":" ","location":"4487","_calName":"Müllkalender","_calColor":"#000000","_object":{"type":"VEVENT","params":[],"start":"2024-02-04T23:00:00.000Z","datetype":"date","end":"2024-02-05T23:00:00.000Z","dtstamp":"2024-01-15T22:30:07.000Z","uid":"170526840940@muellmax.de","url":"http://www.muellmax.de","class":"PUBLIC","created":"2024-01-14T21:40:09.000Z","description":"USB Umweltservice Bochum GmbH\nHanielstraße 1\n44801 Bochum\n\nTelefon: 0234/33 36-0\nFax: 0234/33 36-109","lastmodified":"2024-01-15T20:21:38.000Z","location":"431","sequence":"0","status":"CONFIRMED","summary":"USB Abfuhr Gelb - kombinierte Wertstofftonne","transparency":"TRANSPARENT","method":"PUBLISH"}}] 23:30:07.724 info javascript.0 (1379) script.js.common.Abfallkalender: Anzahl Trash - Daten: 5 23:30:07.724 info javascript.0 (1379) script.js.common.Abfallkalender: Daten vom ical Adapter werden ausgewertet 23:30:07.724 info javascript.0 (1379) script.js.common.Abfallkalender: --------- Nächster Termin wird geprüft --------- 23:30:07.724 info javascript.0 (1379) script.js.common.Abfallkalender: Startdatum UTC: 2024-01-18T23:00:00.000Z 23:30:07.725 info javascript.0 (1379) script.js.common.Abfallkalender: Datum: In 4 Tagen 23:30:07.725 info javascript.0 (1379) script.js.common.Abfallkalender: Event: USB Abfuhr Blau - Altpapier 23:30:07.725 info javascript.0 (1379) script.js.common.Abfallkalender: Kontrolle Leerzeichen %USB Abfuhr Blau - Altpapier% 23:30:07.725 warn javascript.0 (1379) script.js.common.Abfallkalender: Kein Abfalltermin => Event passt mit keinem Abfallnamen überein. 23:30:07.725 info javascript.0 (1379) script.js.common.Abfallkalender: Daten vom ical Adapter werden ausgewertet 23:30:07.725 info javascript.0 (1379) script.js.common.Abfallkalender: --------- Nächster Termin wird geprüft --------- 23:30:07.725 info javascript.0 (1379) script.js.common.Abfallkalender: Startdatum UTC: 2024-01-21T23:00:00.000Z 23:30:07.726 info javascript.0 (1379) script.js.common.Abfallkalender: Datum: In einer Woche 23:30:07.726 info javascript.0 (1379) script.js.common.Abfallkalender: Event: USB Abfuhr Grau - Restmüll 23:30:07.726 info javascript.0 (1379) script.js.common.Abfallkalender: Kontrolle Leerzeichen %USB Abfuhr Grau - Restmüll% 23:30:07.726 warn javascript.0 (1379) script.js.common.Abfallkalender: Kein Abfalltermin => Event passt mit keinem Abfallnamen überein. 23:30:07.726 info javascript.0 (1379) script.js.common.Abfallkalender: Daten vom ical Adapter werden ausgewertet 23:30:07.726 info javascript.0 (1379) script.js.common.Abfallkalender: --------- Nächster Termin wird geprüft --------- 23:30:07.726 info javascript.0 (1379) script.js.common.Abfallkalender: Startdatum UTC: 2024-01-21T23:00:00.000Z 23:30:07.726 info javascript.0 (1379) script.js.common.Abfallkalender: Datum: In einer Woche 23:30:07.727 info javascript.0 (1379) script.js.common.Abfallkalender: Event: USB Abfuhr Gelb - kombinierte Wertstofftonne 23:30:07.727 info javascript.0 (1379) script.js.common.Abfallkalender: Kontrolle Leerzeichen %USB Abfuhr Gelb - kombinierte Wertstofftonne% 23:30:07.727 warn javascript.0 (1379) script.js.common.Abfallkalender: Kein Abfalltermin => Event passt mit keinem Abfallnamen überein. 23:30:07.727 info javascript.0 (1379) script.js.common.Abfallkalender: Daten vom ical Adapter werden ausgewertet 23:30:07.727 info javascript.0 (1379) script.js.common.Abfallkalender: --------- Nächster Termin wird geprüft --------- 23:30:07.727 info javascript.0 (1379) script.js.common.Abfallkalender: Startdatum UTC: 2024-02-04T23:00:00.000Z 23:30:07.727 info javascript.0 (1379) script.js.common.Abfallkalender: Datum: 05.02.2024 23:30:07.728 info javascript.0 (1379) script.js.common.Abfallkalender: Event: USB Abfuhr Grau - Restmüll 23:30:07.728 info javascript.0 (1379) script.js.common.Abfallkalender: Kontrolle Leerzeichen %USB Abfuhr Grau - Restmüll% 23:30:07.728 warn javascript.0 (1379) script.js.common.Abfallkalender: Kein Abfalltermin => Event passt mit keinem Abfallnamen überein. 23:30:07.728 info javascript.0 (1379) script.js.common.Abfallkalender: Daten vom ical Adapter werden ausgewertet 23:30:07.728 info javascript.0 (1379) script.js.common.Abfallkalender: --------- Nächster Termin wird geprüft --------- 23:30:07.728 info javascript.0 (1379) script.js.common.Abfallkalender: Startdatum UTC: 2024-02-04T23:00:00.000Z 23:30:07.728 info javascript.0 (1379) script.js.common.Abfallkalender: Datum: 05.02.2024 23:30:07.729 info javascript.0 (1379) script.js.common.Abfallkalender: Event: USB Abfuhr Gelb - kombinierte Wertstofftonne 23:30:07.729 info javascript.0 (1379) script.js.common.Abfallkalender: Kontrolle Leerzeichen %USB Abfuhr Gelb - kombinierte Wertstofftonne% 23:30:07.729 warn javascript.0 (1379) script.js.common.Abfallkalender: Kein Abfalltermin => Event passt mit keinem Abfallnamen überein.
