NEWS
IOB keine Weboberfläche für Zigbee oder Objekte
-
ich sehe schon: Admin.0 läuft nicht.
Den konnte ich manuell starten, aber dann funktioniert er nach einem Reboot wieder nicht, oder ? -
Teste es , dann kann man immer noch nach einem Fehler suchen .
Aber dein System ... hat schon einiges hintersich und ist nicht Aktuell !
-
npm ERR! invalid: eiscp@0.0.1 /opt/iobroker/node_modules/eiscp
npm ERR! invalid: buffer@5.7.1 /opt/iobroker/node_modules/bufferDa musst du mal schauen wo die herkommen. Entweder löschen oder neuinstallieren.
js-controller: 4.0.24
Veraltet, updaten.
Pending Updates: 11
Updates einspielen.
-
gesehn ... sportliche Nummer :
/opt/iobroker/iobroker-data:
16G /opt/iobroker/iobroker-data/
15G /opt/iobroker/iobroker-data/history -
@thomas-braun Du weist doch, wei hatten vor ca 4 Wochen mal alles geupdatet.
Das ist doch nicht normal, das man so schnell "veraltert" ist ?
Wenn ich sehe das Adapter ein update haben wollen, mach ich das ja schon immer sofort.Kürzlich habe ich den Device-Reminder für Zigbee installiert und kurz danach war wieder alles kaputt, so das ich auf ein Backup gegangen bin.
Das war bisher eigendlich nie ein Problem, aber seit ein paar Monaten hab ich andauernd irgendwas...npm ERR! invalid: eiscp@0.0.1 /opt/iobroker/node_modules/eiscp npm ERR! invalid: buffer@5.7.1 /opt/iobroker/node_modules/buffer
ich weiss nicht was das sein soll.... schon gar nicht, wie ich das entfernen kann
-
@glasfaser
Die History benutze ich eigendlich gar nicht mehr, Mach ja ales mit informix.
Ich lösch da erstmal altes Zeug -
... würde auch mal schauen warum der Ordner so aufgebläht ist , 16 Gigabyte ist schon groß
16G /opt/iobroker/iobroker-data/
-
einer kommt vom ( eventuell eine anhängigkeit )
+ system.adapter.onkyo.0 : onkyo : iobroker - enabled
Adapter
der andere sagt mir gerade nichts
-
Man hält das Zeug ja auch laufend aktuell.
-
@thomas-braun
Ich habe mal in meine History Ordner geschaut was da überhaupt mitgeloggt wird.
Ich bin irgendwie irritiert.
Was ist das ?
Ich finde keine Objekte wo die History aktiviert ist.ich hab das früher mal für Temperaturen gemacht. Das mache ich jetzt aber alles über Influx.
Hier ein Beispiel:
-
@wolkenloser sagte in IOB keine Weboberfläche für Zigbee oder Objekte:
Ich finde keine Objekte wo die History aktiviert ist
Filtere danach .. was zeigt er an :
-
gesehn ... sportliche Nummer :
/opt/iobroker/iobroker-data:
16G /opt/iobroker/iobroker-data/
15G /opt/iobroker/iobroker-data/history/opt/iobroker/iobroker-data: 3.9G /opt/iobroker/iobroker-data/ 3.0G /opt/iobroker/iobroker-data/history
hab viel gelöscht
npm ERR! invalid: eiscp@0.0.1 /opt/iobroker/node_modules/eiscp npm ERR! invalid: buffer@5.7.1 /opt/iobroker/node_modules/buffer
wegen dem NPN Error: Ich habe den Onkyo Adapter der anscheinend EISCP benutzt einmal entfernt und neu intalliert, aber das hat nichts gebracht.
-
cd /opt/iobroker && npm ls buffer eiscp
-
@thomas-braun sagte in IOB keine Weboberfläche für Zigbee oder Objekte:
cd /opt/iobroker && npm ls buffer eiscp
npm ERR! code ELSPROBLEMS npm ERR! invalid: eiscp@0.0.1 /opt/iobroker/node_modules/eiscp npm ERR! invalid: buffer@5.7.1 /opt/iobroker/node_modules/buffer iobroker.inst@2.0.3 /opt/iobroker ├─┬ iobroker.bydhvs@1.5.0 │ └─┬ crc@4.3.2 │ └── buffer@5.7.1 invalid: ">=6.0.3" from node_modules/crc ├─┬ iobroker.onkyo@2.1.2 │ └── eiscp@0.0.1 invalid: "https://github.com/GermanBluefox/node-eiscp/tarball/master/" from node_modules/iobroker.onkyo └─┬ iobroker.shelly@6.6.1 ├─┬ mqtt-connection@4.1.0 │ └─┬ mqtt-packet@6.10.0 │ └─┬ bl@4.1.0 │ └── buffer@5.7.1 deduped invalid: ">=6.0.3" from node_modules/crc └─┬ shelly-iot@1.1.2 └─┬ coap@0.26.0 └─┬ bl@5.1.0 └── buffer@6.0.3 npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-01-09T19_16_09_037Z-debug-0.log
-
Da siehst du wo es klemmt.
-
Installier den nochmal. Hier wird der nämlich dann richtig reingeholt:
├─┬ iobroker.bydhvs@1.5.0 │ └─┬ crc@4.3.2 │ └── buffer@6.0.3
-
Ich versuch es mal
-
-
Ich habe den BYD Adaper deinstalliert und neuinstalliert und nochmal deinstalliert, auch den Onkyo Adapter.
Das Ergebnis ist folgendes
:/opt/iobroker$ cd /opt/iobroker && npm ls buffer eiscp npm ERR! code ELSPROBLEMS npm ERR! invalid: eiscp@0.0.1 /opt/iobroker/node_modules/eiscp iobroker.inst@2.0.3 /opt/iobroker ├─┬ iobroker.onkyo@2.1.2 │ └── eiscp@0.0.1 invalid: "https://github.com/GermanBluefox/node-eiscp/tarball/master/" from node_modules/iobroker.onkyo └─┬ iobroker.shelly@6.6.1 ├─┬ mqtt-connection@4.1.0 │ └─┬ mqtt-packet@6.10.0 │ └─┬ bl@4.1.0 │ └── buffer@5.7.1 └─┬ shelly-iot@1.1.2 └─┬ coap@0.26.0 └─┬ bl@5.1.0 └── buffer@6.0.3 npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-01-09T20_08_08_522Z-debug-0.log