NEWS
Error herdsman start Failed to start Zigbee
-
Systemdata Bitte Ausfüllen Hardwaresystem: PI5 Arbeitsspeicher: 8GB Festplattenart: SD-Karte Betriebssystem: Bookworm Node-Version: 20.x.x Nodejs-Version: 20.x.x NPM-Version: 10.x.x Installationsart: Skript Image genutzt: Nein Habe leider massive Probleme mit folgender Hardware:
Zigbee 1.9.5
Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00'
Das ist die TI Platine CC2642R1 / CC2652R1
BOM Rev C / FW SDK3.40 2303
Geflasht wurde mit Uniflash mit vorherigem Erase
CC2652R_coordinator_20230507.zip
Z-Stack_3.x.0 coordinator 20230507Nach jedem Reboot kommt der Fehler und alle devices sind weg.
Wenn ich dann die pan id oder transport key änder kann ich das gerät wieder konfigurieren und in betrieb nehmen.Das ganze bis zum nächsten Neustart dann ist alles wieder weg.
Hat jemand eine Idee ob ich etwas falsch konfigueriert habe. Das System selbst ist nagelneu aufgesetzt und nur der Zigbee Adapter macht massive Probleme
@varg sagte in Error herdsman start Failed to start Zigbee:
Das System selbst ist nagelneu aufgesetz
Und warum mit nodejs@20, wenn man der Eintragung oben trauen darf?
Check mal per
iob diagdie Installation.
-
@varg sagte in Error herdsman start Failed to start Zigbee:
Das System selbst ist nagelneu aufgesetz
Und warum mit nodejs@20, wenn man der Eintragung oben trauen darf?
Check mal per
iob diagdie Installation.
ok moment ich jags durch
-
@varg sagte in Error herdsman start Failed to start Zigbee:
Das System selbst ist nagelneu aufgesetz
Und warum mit nodejs@20, wenn man der Eintragung oben trauen darf?
Check mal per
iob diagdie Installation.
======== Start marking the full check here =========Skript v.2023-10-10
*** BASE SYSTEM ***
Static hostname: iobrokerpi5
Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
Kernel: Linux 6.1.0-rpi7-rpi-2712
Architecture: arm64Model : Raspberry Pi 5 Model B Rev 1.0
Docker : false
Virtualization : none
Kernel : aarch64
Userland : arm64Systemuptime and Load:
12:07:23 up 18 min, 2 users, load average: 0.07, 0.14, 0.15
CPU threads: 4*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.Previously detected issues:
No throttling issues detected.*** Time and Time Zones ***
Local time: Fri 2024-01-05 12:07:23 CET
Universal time: Fri 2024-01-05 11:07:23 UTC
RTC time: Fri 2024-01-05 11:07:23
Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker*** X-Server-Setup ***
X-Server: false
Desktop:
Terminal: tty
Boot Target: multi-user.target*** MEMORY ***
total used free shared buff/cache available
Mem: 8.4G 1.4G 6.8G 5.2M 439M 7.1G
Swap: 104M 0B 104M
Total: 8.5G 1.4G 6.9G8053 M total memory 1287 M used memory 1170 M active memory 236 M inactive memory 6439 M free memory 36 M buffer memory 383 M swap cache 99 M total swap 0 M used swap 99 M free swapRaspberry only:
vc_gencmd_read_response returned -1
error=1 error_msg="Command not registered"*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs tmpfs 806M 5.0M 801M 1% /run
/dev/mmcblk0p2 ext4 29G 3.3G 25G 12% /
tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm
tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock
/dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware
tmpfs tmpfs 806M 0 806M 0% /run/user/1000Messages concerning ext4 filesystem in dmesg:
[Fri Jan 5 11:48:26 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=D8:3A:DD:E2:FA:5E vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=c9d943cf-02 rootfstype=ext4 fsck.repair=yes rootwait
[Fri Jan 5 11:48:29 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Fri Jan 5 11:48:30 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-roFiles in neuralgic directories:
/var:
494M /var/
176M /var/cache
170M /var/cache/apt
160M /var/lib
132M /var/lib/apt/listsArchived and active journals take up 56.9M in the file system.
/opt/iobroker/backups:
4.0K /opt/iobroker/backups//opt/iobroker/iobroker-data:
231M /opt/iobroker/iobroker-data/
142M /opt/iobroker/iobroker-data/files
67M /opt/iobroker/iobroker-data/files/javascript.admin
48M /opt/iobroker/iobroker-data/files/javascript.admin/static
47M /opt/iobroker/iobroker-data/files/javascript.admin/static/jsThe five largest files in iobroker-data are:
72M /opt/iobroker/iobroker-data/objects.jsonl
33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
12M /opt/iobroker/iobroker-data/states.jsonl
8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js
7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.mapUSB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':find: '/dev/serial/by-id/': No such file or directory
*** NodeJS-Installation ***
/usr/bin/nodejs v20.10.0
/usr/bin/node v20.10.0
/usr/bin/npm 10.2.3
/usr/bin/npx 10.2.3
/usr/bin/corepack 0.22.0nodejs:
Installed: 20.10.0-1nodesource1
Candidate: 20.10.0-1nodesource1
Version table:
*** 20.10.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
100 /var/lib/dpkg/status
20.9.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.7.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.4.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.2.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.1.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.0.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
18.19.0+dfsg-6~deb12u1 500
500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
18.13.0+dfsg1-1 500
500 http://deb.debian.org/debian bookworm/main arm64 PackagesTemp directories causing npm8 problem: 0
No problems detectedErrors in npm tree:
*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.Objects type: jsonl
States type: jsonlCore adapters versions
js-controller: 5.0.17
admin: 6.12.0
javascript: 7.1.6Adapters from github: 1
Adapter State
-
system.adapter.admin.0 : admin : iobrokerpi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin
-
system.adapter.alexa2.0 : alexa2 : iobrokerpi5 - enabled
system.adapter.device-reminder.0 : device-reminder : iobrokerpi5 - disabled -
system.adapter.fb-checkpresence.0 : fb-checkpresence : iobrokerpi5 - enabled
system.adapter.ical.0 : ical : iobrokerpi5 - enabled -
system.adapter.info.0 : info : iobrokerpi5 - enabled
-
system.adapter.iot.0 : iot : iobrokerpi5 - enabled
-
system.adapter.javascript.0 : javascript : iobrokerpi5 - enabled
system.adapter.openweathermap.0 : openweathermap : iobrokerpi5 - enabled -
system.adapter.ping.0 : ping : iobrokerpi5 - enabled
-
system.adapter.pushover.0 : pushover : iobrokerpi5 - enabled
-
system.adapter.shelly.0 : shelly : iobrokerpi5 - enabled, port: 1882, bind: 0.0.0.0
-
system.adapter.sonoff.0 : sonoff : iobrokerpi5 - enabled, port: 1883, bind: 0.0.0.0
-
system.adapter.tr-064.0 : tr-064 : iobrokerpi5 - enabled
-
system.adapter.trashschedule.0 : trashschedule : iobrokerpi5 - enabled
-
system.adapter.zigbee.0 : zigbee : iobrokerpi5 - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00
system.adapter.zwave2.0 : zwave2 : iobrokerpi5 - disabled -
instance is alive
Enabled adapters with bindings
- system.adapter.admin.0 : admin : iobrokerpi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin
- system.adapter.shelly.0 : shelly : iobrokerpi5 - enabled, port: 1882, bind: 0.0.0.0
- system.adapter.sonoff.0 : sonoff : iobrokerpi5 - enabled, port: 1883, bind: 0.0.0.0
- system.adapter.zigbee.0 : zigbee : iobrokerpi5 - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00
ioBroker-Repositories
stable : http://iobroker.live/repo/sources-dist.json
beta : http://iobroker.live/repo/sources-dist-latest.jsonActive repo(s): stable
Installed ioBroker-Instances
Used repository: stable
Adapter "admin" : 6.12.0 , installed 6.12.0
Adapter "alexa2" : 3.26.3 , installed 3.26.3
Adapter "device-reminder": 3.0.0 , installed 3.0.0
Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter "ical" : 1.13.3 , installed 1.13.6
Adapter "info" : 2.0.0 , installed 2.0.0
Adapter "iot" : 2.0.11 , installed 2.0.11
Adapter "javascript" : 7.1.6 , installed 7.1.6
Controller "js-controller": 5.0.17 , installed 5.0.17
Adapter "openweathermap": 0.4.5 , installed 0.4.5
Adapter "ping" : 1.6.2 , installed 1.6.2
Adapter "pushover" : 3.0.6 , installed 3.0.6
Adapter "shelly" : 6.6.1 , installed 6.6.1
Adapter "sonoff" : 3.0.3 , installed 3.0.3
Adapter "tr-064" : 4.2.18 , installed 4.2.18
Adapter "trashschedule": 2.3.0 , installed 3.1.3
Adapter "zigbee" : 1.9.5 , installed 1.9.5
Adapter "zwave2" : 3.1.0 , installed 3.1.0Objects and States
Please stand by - This may take a while
Objects: 6996
States: 6069*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 742 774/iobroker.js-con
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16083 774/iobroker.js-con
tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 15086 992/io.sonoff.0
tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 883 977/io.shelly.0
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14865 783/sshd: /usr/sbin
tcp6 0 0 :::8081 :::* LISTEN 1001 16543 835/io.admin.0
tcp6 0 0 :::22 :::* LISTEN 0 14867 783/sshd: /usr/sbin
udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 14779 668/avahi-daemon: r
udp 0 0 0.0.0.0:55814 0.0.0.0:* 104 14781 668/avahi-daemon: r
udp6 0 0 :::58098 :::* 104 14782 668/avahi-daemon: r
udp6 0 0 :::5353 :::* 104 14780 668/avahi-daemon: r
udp6 0 0 fe80::9c21:67c8:9e0:546 :::* 0 16562 744/NetworkManager*** Log File - Last 25 Lines ***
2024-01-05 11:51:40.347 - info: zigbee.0 (1797) Try to reconnect. 1 attempts left
2024-01-05 11:51:40.347 - info: zigbee.0 (1797) Starting Zigbee npm ...
2024-01-05 11:51:40.354 - info: zigbee.0 (1797) Installed Version: iobroker.zigbee@1.9.5
2024-01-05 11:51:40.483 - error: zigbee.0 (1797) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00'"
2024-01-05 11:51:40.484 - error: zigbee.0 (1797) Failed to start Zigbee
2024-01-05 11:51:40.484 - error: zigbee.0 (1797) Error herdsman start
2024-01-05 11:53:47.209 - info: admin.0 (835) ==> Connected system.user.admin from ::ffff:192.168.178.55
2024-01-05 11:53:47.253 - error: zigbee.0 (1797) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2024-01-05 11:53:47.341 - info: zigbee.0 (1797) List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}]
2024-01-05 11:54:19.105 - info: sonoff.0 (992) Client [H801-09] reconnected. Old secret 1704451755348_1275. New secret 1704452059105_1488
2024-01-05 11:57:36.056 - info: admin.0 (835) <== Disconnect system.user.admin from ::ffff:192.168.178.55
2024-01-05 11:59:39.697 - info: admin.0 (835) ==> Connected system.user.admin from ::ffff:192.168.178.55
2024-01-05 11:59:39.765 - error: zigbee.0 (1797) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2024-01-05 11:59:39.865 - info: zigbee.0 (1797) List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}]
2024-01-05 11:59:43.074 - info: admin.0 (835) <== Disconnect system.user.admin from ::ffff:192.168.178.55
2024-01-05 12:00:00.017 - info: host.iobrokerpi5 instance system.adapter.ical.0 started with pid 1940
2024-01-05 12:00:00.833 - info: ical.0 (1940) starting. Version 1.13.6 in /opt/iobroker/node_modules/iobroker.ical, node: v20.10.0, js-controller: 5.0.17
2024-01-05 12:00:01.353 - info: ical.0 (1940) processing URL: Abfallkalender https://calendar.google.com/calendar/ical/74136c8244b022bb0b5d97fdfdee2fe0673eff82bd6842020c2e12bf6c7b489f%40group.calendar.google.com/private-0f8560b829f811ff6c358361c50e5091/basic.ics
2024-01-05 12:00:01.403 - info: ical.0 (1940) processing URL: Getränkelieferung https://calendar.google.com/calendar/ical/d6sfsku6srbsv5hqp4ane444p8%40group.calendar.google.com/private-573cc39705cb099fd04bbf245c705fea/basic.ics
2024-01-05 12:00:01.478 - info: trashschedule.0 (1734) Setting "actionNeeded" flag for type.biomüll.actionNeeded to true (???)
2024-01-05 12:00:06.445 - info: ical.0 (1940) Terminated (NO_ERROR): Without reason
2024-01-05 12:00:06.967 - info: host.iobrokerpi5 instance system.adapter.ical.0 terminated with code 0 (NO_ERROR)
2024-01-05 12:03:18.582 - info: admin.0 (835) ==> Connected system.user.admin from ::ffff:192.168.178.55
2024-01-05 12:03:18.611 - error: zigbee.0 (1797) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2024-01-05 12:03:18.692 - info: zigbee.0 (1797) List of port: [{"path":"/dev/ttyAMA10"}]Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobrokerpi5 Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-2712 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.10.0 /usr/bin/node v20.10.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs and npm Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.4G 1.4G 6.3G 5.4M 760M 7.0G Swap: 104M 0B 104M Total: 8.5G 1.4G 6.4G Active iob-Instances: 14 Active repo(s): stable ioBroker Core: js-controller 5.0.17 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobrokerpi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin Objects: 6996 States: 6069 Size of iob-Database: 80M /opt/iobroker/iobroker-data/objects.jsonl 1.5M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ======================= Mark text until here for copying ===
-
-
======== Start marking the full check here =========Skript v.2023-10-10
*** BASE SYSTEM ***
Static hostname: iobrokerpi5
Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
Kernel: Linux 6.1.0-rpi7-rpi-2712
Architecture: arm64Model : Raspberry Pi 5 Model B Rev 1.0
Docker : false
Virtualization : none
Kernel : aarch64
Userland : arm64Systemuptime and Load:
12:07:23 up 18 min, 2 users, load average: 0.07, 0.14, 0.15
CPU threads: 4*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.Previously detected issues:
No throttling issues detected.*** Time and Time Zones ***
Local time: Fri 2024-01-05 12:07:23 CET
Universal time: Fri 2024-01-05 11:07:23 UTC
RTC time: Fri 2024-01-05 11:07:23
Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker*** X-Server-Setup ***
X-Server: false
Desktop:
Terminal: tty
Boot Target: multi-user.target*** MEMORY ***
total used free shared buff/cache available
Mem: 8.4G 1.4G 6.8G 5.2M 439M 7.1G
Swap: 104M 0B 104M
Total: 8.5G 1.4G 6.9G8053 M total memory 1287 M used memory 1170 M active memory 236 M inactive memory 6439 M free memory 36 M buffer memory 383 M swap cache 99 M total swap 0 M used swap 99 M free swapRaspberry only:
vc_gencmd_read_response returned -1
error=1 error_msg="Command not registered"*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs tmpfs 806M 5.0M 801M 1% /run
/dev/mmcblk0p2 ext4 29G 3.3G 25G 12% /
tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm
tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock
/dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware
tmpfs tmpfs 806M 0 806M 0% /run/user/1000Messages concerning ext4 filesystem in dmesg:
[Fri Jan 5 11:48:26 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=D8:3A:DD:E2:FA:5E vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=c9d943cf-02 rootfstype=ext4 fsck.repair=yes rootwait
[Fri Jan 5 11:48:29 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Fri Jan 5 11:48:30 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-roFiles in neuralgic directories:
/var:
494M /var/
176M /var/cache
170M /var/cache/apt
160M /var/lib
132M /var/lib/apt/listsArchived and active journals take up 56.9M in the file system.
/opt/iobroker/backups:
4.0K /opt/iobroker/backups//opt/iobroker/iobroker-data:
231M /opt/iobroker/iobroker-data/
142M /opt/iobroker/iobroker-data/files
67M /opt/iobroker/iobroker-data/files/javascript.admin
48M /opt/iobroker/iobroker-data/files/javascript.admin/static
47M /opt/iobroker/iobroker-data/files/javascript.admin/static/jsThe five largest files in iobroker-data are:
72M /opt/iobroker/iobroker-data/objects.jsonl
33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
12M /opt/iobroker/iobroker-data/states.jsonl
8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js
7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.mapUSB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':find: '/dev/serial/by-id/': No such file or directory
*** NodeJS-Installation ***
/usr/bin/nodejs v20.10.0
/usr/bin/node v20.10.0
/usr/bin/npm 10.2.3
/usr/bin/npx 10.2.3
/usr/bin/corepack 0.22.0nodejs:
Installed: 20.10.0-1nodesource1
Candidate: 20.10.0-1nodesource1
Version table:
*** 20.10.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
100 /var/lib/dpkg/status
20.9.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.7.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.4.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.2.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.1.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.0.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
18.19.0+dfsg-6~deb12u1 500
500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
18.13.0+dfsg1-1 500
500 http://deb.debian.org/debian bookworm/main arm64 PackagesTemp directories causing npm8 problem: 0
No problems detectedErrors in npm tree:
*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.Objects type: jsonl
States type: jsonlCore adapters versions
js-controller: 5.0.17
admin: 6.12.0
javascript: 7.1.6Adapters from github: 1
Adapter State
-
system.adapter.admin.0 : admin : iobrokerpi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin
-
system.adapter.alexa2.0 : alexa2 : iobrokerpi5 - enabled
system.adapter.device-reminder.0 : device-reminder : iobrokerpi5 - disabled -
system.adapter.fb-checkpresence.0 : fb-checkpresence : iobrokerpi5 - enabled
system.adapter.ical.0 : ical : iobrokerpi5 - enabled -
system.adapter.info.0 : info : iobrokerpi5 - enabled
-
system.adapter.iot.0 : iot : iobrokerpi5 - enabled
-
system.adapter.javascript.0 : javascript : iobrokerpi5 - enabled
system.adapter.openweathermap.0 : openweathermap : iobrokerpi5 - enabled -
system.adapter.ping.0 : ping : iobrokerpi5 - enabled
-
system.adapter.pushover.0 : pushover : iobrokerpi5 - enabled
-
system.adapter.shelly.0 : shelly : iobrokerpi5 - enabled, port: 1882, bind: 0.0.0.0
-
system.adapter.sonoff.0 : sonoff : iobrokerpi5 - enabled, port: 1883, bind: 0.0.0.0
-
system.adapter.tr-064.0 : tr-064 : iobrokerpi5 - enabled
-
system.adapter.trashschedule.0 : trashschedule : iobrokerpi5 - enabled
-
system.adapter.zigbee.0 : zigbee : iobrokerpi5 - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00
system.adapter.zwave2.0 : zwave2 : iobrokerpi5 - disabled -
instance is alive
Enabled adapters with bindings
- system.adapter.admin.0 : admin : iobrokerpi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin
- system.adapter.shelly.0 : shelly : iobrokerpi5 - enabled, port: 1882, bind: 0.0.0.0
- system.adapter.sonoff.0 : sonoff : iobrokerpi5 - enabled, port: 1883, bind: 0.0.0.0
- system.adapter.zigbee.0 : zigbee : iobrokerpi5 - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00
ioBroker-Repositories
stable : http://iobroker.live/repo/sources-dist.json
beta : http://iobroker.live/repo/sources-dist-latest.jsonActive repo(s): stable
Installed ioBroker-Instances
Used repository: stable
Adapter "admin" : 6.12.0 , installed 6.12.0
Adapter "alexa2" : 3.26.3 , installed 3.26.3
Adapter "device-reminder": 3.0.0 , installed 3.0.0
Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter "ical" : 1.13.3 , installed 1.13.6
Adapter "info" : 2.0.0 , installed 2.0.0
Adapter "iot" : 2.0.11 , installed 2.0.11
Adapter "javascript" : 7.1.6 , installed 7.1.6
Controller "js-controller": 5.0.17 , installed 5.0.17
Adapter "openweathermap": 0.4.5 , installed 0.4.5
Adapter "ping" : 1.6.2 , installed 1.6.2
Adapter "pushover" : 3.0.6 , installed 3.0.6
Adapter "shelly" : 6.6.1 , installed 6.6.1
Adapter "sonoff" : 3.0.3 , installed 3.0.3
Adapter "tr-064" : 4.2.18 , installed 4.2.18
Adapter "trashschedule": 2.3.0 , installed 3.1.3
Adapter "zigbee" : 1.9.5 , installed 1.9.5
Adapter "zwave2" : 3.1.0 , installed 3.1.0Objects and States
Please stand by - This may take a while
Objects: 6996
States: 6069*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 742 774/iobroker.js-con
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16083 774/iobroker.js-con
tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 15086 992/io.sonoff.0
tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 883 977/io.shelly.0
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14865 783/sshd: /usr/sbin
tcp6 0 0 :::8081 :::* LISTEN 1001 16543 835/io.admin.0
tcp6 0 0 :::22 :::* LISTEN 0 14867 783/sshd: /usr/sbin
udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 14779 668/avahi-daemon: r
udp 0 0 0.0.0.0:55814 0.0.0.0:* 104 14781 668/avahi-daemon: r
udp6 0 0 :::58098 :::* 104 14782 668/avahi-daemon: r
udp6 0 0 :::5353 :::* 104 14780 668/avahi-daemon: r
udp6 0 0 fe80::9c21:67c8:9e0:546 :::* 0 16562 744/NetworkManager*** Log File - Last 25 Lines ***
2024-01-05 11:51:40.347 - info: zigbee.0 (1797) Try to reconnect. 1 attempts left
2024-01-05 11:51:40.347 - info: zigbee.0 (1797) Starting Zigbee npm ...
2024-01-05 11:51:40.354 - info: zigbee.0 (1797) Installed Version: iobroker.zigbee@1.9.5
2024-01-05 11:51:40.483 - error: zigbee.0 (1797) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00'"
2024-01-05 11:51:40.484 - error: zigbee.0 (1797) Failed to start Zigbee
2024-01-05 11:51:40.484 - error: zigbee.0 (1797) Error herdsman start
2024-01-05 11:53:47.209 - info: admin.0 (835) ==> Connected system.user.admin from ::ffff:192.168.178.55
2024-01-05 11:53:47.253 - error: zigbee.0 (1797) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2024-01-05 11:53:47.341 - info: zigbee.0 (1797) List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}]
2024-01-05 11:54:19.105 - info: sonoff.0 (992) Client [H801-09] reconnected. Old secret 1704451755348_1275. New secret 1704452059105_1488
2024-01-05 11:57:36.056 - info: admin.0 (835) <== Disconnect system.user.admin from ::ffff:192.168.178.55
2024-01-05 11:59:39.697 - info: admin.0 (835) ==> Connected system.user.admin from ::ffff:192.168.178.55
2024-01-05 11:59:39.765 - error: zigbee.0 (1797) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2024-01-05 11:59:39.865 - info: zigbee.0 (1797) List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}]
2024-01-05 11:59:43.074 - info: admin.0 (835) <== Disconnect system.user.admin from ::ffff:192.168.178.55
2024-01-05 12:00:00.017 - info: host.iobrokerpi5 instance system.adapter.ical.0 started with pid 1940
2024-01-05 12:00:00.833 - info: ical.0 (1940) starting. Version 1.13.6 in /opt/iobroker/node_modules/iobroker.ical, node: v20.10.0, js-controller: 5.0.17
2024-01-05 12:00:01.353 - info: ical.0 (1940) processing URL: Abfallkalender https://calendar.google.com/calendar/ical/74136c8244b022bb0b5d97fdfdee2fe0673eff82bd6842020c2e12bf6c7b489f%40group.calendar.google.com/private-0f8560b829f811ff6c358361c50e5091/basic.ics
2024-01-05 12:00:01.403 - info: ical.0 (1940) processing URL: Getränkelieferung https://calendar.google.com/calendar/ical/d6sfsku6srbsv5hqp4ane444p8%40group.calendar.google.com/private-573cc39705cb099fd04bbf245c705fea/basic.ics
2024-01-05 12:00:01.478 - info: trashschedule.0 (1734) Setting "actionNeeded" flag for type.biomüll.actionNeeded to true (???)
2024-01-05 12:00:06.445 - info: ical.0 (1940) Terminated (NO_ERROR): Without reason
2024-01-05 12:00:06.967 - info: host.iobrokerpi5 instance system.adapter.ical.0 terminated with code 0 (NO_ERROR)
2024-01-05 12:03:18.582 - info: admin.0 (835) ==> Connected system.user.admin from ::ffff:192.168.178.55
2024-01-05 12:03:18.611 - error: zigbee.0 (1797) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2024-01-05 12:03:18.692 - info: zigbee.0 (1797) List of port: [{"path":"/dev/ttyAMA10"}]Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobrokerpi5 Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-2712 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.10.0 /usr/bin/node v20.10.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs and npm Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.4G 1.4G 6.3G 5.4M 760M 7.0G Swap: 104M 0B 104M Total: 8.5G 1.4G 6.4G Active iob-Instances: 14 Active repo(s): stable ioBroker Core: js-controller 5.0.17 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobrokerpi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin Objects: 6996 States: 6069 Size of iob-Database: 80M /opt/iobroker/iobroker-data/objects.jsonl 1.5M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ======================= Mark text until here for copying ===
-
-
@thomas-braun said in Error herdsman start Failed to start Zigbee:
iob nodejs-update 18
ioBroker nodejs updater 2023-10-13 You requested to intall latest version from nodejs v18 tree. Your current setup is: /usr/bin/nodejs v20.10.0 /usr/bin/node v20.10.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 We found these nodejs versions available for installation: nodejs: Installed: 20.10.0-1nodesource1 Candidate: 20.10.0-1nodesource1 Version table: *** 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages Nothing to do - Your installation is using the correct paths. You are running nodejs v20.10.0. Do you want to install latest version from nodejs v.18 tree? Press <y> to continue or any other key to quit Trying to update your installation now. Please be patient. Waiting for ioBroker to shut down - Give me a minute... ############################################################ *** These repos are active on your system: Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Reading package lists... Done *** Installing ca-certificates, curl and gnupg, just in case they are missing. *** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main Package: nodejs Pin: origin deb.nodesource.com Pin-Priority: 1001 *** These repos are active after the adjustments: Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Get:5 https://deb.nodesource.com/node_18.x nodistro InRelease [12.1 kB] Get:6 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages [6656 B] Get:7 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages [6613 B] Fetched 25.4 kB in 1s (45.4 kB/s) Reading package lists... Done Installing the recommended nodejs version now! Exact recommended version unknown, installing a fallback! dpkg: warning: downgrading nodejs from 20.10.0-1nodesource1 to 18.0.0-1nodesource1 (Reading database ... 68077 files and directories currently installed.) Preparing to unpack .../nodejs_18.0.0-1nodesource1_arm64.deb ... Detected old npm client, removing... Unpacking nodejs (18.0.0-1nodesource1) over (20.10.0-1nodesource1) ... Setting up nodejs (18.0.0-1nodesource1) ... Processing triggers for man-db (2.11.2-2) ... Updating fallback to latest nodejs v18 release (Reading database ... 68299 files and directories currently installed.) Preparing to unpack .../nodejs_18.19.0-1nodesource1_arm64.deb ... Detected old npm client, removing... Unpacking nodejs (18.19.0-1nodesource1) over (18.0.0-1nodesource1) ... Setting up nodejs (18.19.0-1nodesource1) ... Processing triggers for man-db (2.11.2-2) ... v18.19.0 has been installed! You are using the latest version now! Installing the recommended nodejs version! We tried our best to update or fix your nodejs. Please run iob diag again to verify. *** RESTARTING ioBroker NOW! *** Please refresh or restart your browser in a few moments. pi@iobrokerpi5:~ $moment ich check ob sich was geändert hat und danke schonmal für den Beistand
Node.js v18.19.0
pi@iobrokerpi5:~ $ nodejs -v
v18.19.0
pi@iobrokerpi5:~ $ node -v
v18.19.0
pi@iobrokerpi5:~ $ npm -v
10.2.3
pi@iobrokerpi5:~ $ -
zigbee.0 2024-01-05 12:17:42.424 error Error herdsman start zigbee.0 2024-01-05 12:17:42.423 error Failed to start Zigbee zigbee.0 2024-01-05 12:17:42.423 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" zigbee.0 2024-01-05 12:17:42.303 info Installed Version: iobroker.zigbee@1.9.5 zigbee.0 2024-01-05 12:17:42.297 info Starting Zigbee npm ... zigbee.0 2024-01-05 12:17:42.297 info Try to reconnect. 1 attempts left zigbee.0 2024-01-05 12:17:32.294 error Error herdsman start zigbee.0 2024-01-05 12:17:32.293 error Failed to start Zigbee zigbee.0 2024-01-05 12:17:32.293 error Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"pi@iobrokerpi5:~ $ ls -ls /dev/serial/by-id/ total 0 0 lrwxrwxrwx 1 root root 13 Jan 5 12:15 usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00 -> ../../ttyACM0 0 lrwxrwxrwx 1 root root 13 Jan 5 12:15 usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03 -> ../../ttyACM1zigbee.0 2024-01-05 12:19:29.585 error Error herdsman start zigbee.0 2024-01-05 12:19:29.584 error Failed to start Zigbee zigbee.0 2024-01-05 12:19:29.584 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" zigbee.0 2024-01-05 12:19:29.459 info Installed Version: iobroker.zigbee@1.9.5 zigbee.0 2024-01-05 12:19:29.451 info Starting Zigbee npm ... zigbee.0 2024-01-05 12:19:29.450 info Try to reconnect. 1 attempts left zigbee.0 2024-01-05 12:19:19.447 error Error herdsman start zigbee.0 2024-01-05 12:19:19.447 error Failed to start Zigbee zigbee.0 2024-01-05 12:19:19.447 error Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" zigbee.0 2024-01-05 12:19:19.376 error Re-commissioning your network will require re-pairing of all devices! zigbee.0 2024-01-05 12:19:19.375 error If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. zigbee.0 2024-01-05 12:19:19.375 error Please update configuration to prevent further issues. zigbee.0 2024-01-05 12:19:19.375 error - Channel List: configured=11, adapter=11 zigbee.0 2024-01-05 12:19:19.374 error - Network Key: configured=ffffffffffffffffaaaaaaaaaaaaaaaa, adapter=ffffffffffffffffbbbbbbbbbbbbbbbb zigbee.0 2024-01-05 12:19:19.374 error - Extended PAN ID: configured=ffffffffaaaaaaaa, adapter=ddddddddaaaaaaaa zigbee.0 2024-01-05 12:19:19.374 error - PAN ID: configured=6754, adapter=6754 zigbee.0 2024-01-05 12:19:19.373 error Configuration is not consistent with adapter state/backup!1 Zeit debug Nachricht zigbee.0 2024-01-05 12:22:15.518 error Error herdsman start zigbee.0 2024-01-05 12:22:15.518 error Failed to start Zigbee zigbee.0 2024-01-05 12:22:15.517 error Starting zigbee-herdsman problem : "network commissioning timed out - most likely network with the same panId or extendedPanId already exists nearby" admin.0 2024-01-05 12:22:13.107 info <== Disconnect system.user.admin from ::ffff:192.168.178.55 admin.0 2024-01-05 12:22:13.107 info <== Disconnect system.user.admin from ::ffff:192.168.178.55 zigbee.0 2024-01-05 12:22:04.147 info List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}] zigbee.0 2024-01-05 12:22:04.051 error getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups') admin.0 2024-01-05 12:22:03.973 info ==> Connected system.user.admin from ::ffff:192.168.178.55 admin.0 2024-01-05 12:22:02.099 info <== Disconnect system.user.admin from ::ffff:192.168.178.55 zigbee.0 2024-01-05 12:21:58.972 info List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}] zigbee.0 2024-01-05 12:21:58.878 error getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')ich installier den adapter mal neu
-
will leider nicht
zigbee.0 2024-01-05 12:32:22.961 error Error herdsman start zigbee.0 2024-01-05 12:32:22.961 error Failed to start Zigbee zigbee.0 2024-01-05 12:32:22.961 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" zigbee.0 2024-01-05 12:32:22.824 info Installed Version: iobroker.zigbee@1.9.5 zigbee.0 2024-01-05 12:32:22.816 info Starting Zigbee npm ... zigbee.0 2024-01-05 12:32:22.815 info Try to reconnect. 1 attempts left admin.0 2024-01-05 12:32:18.198 info <== Disconnect system.user.admin from ::ffff:192.168.178.55 admin.0 2024-01-05 12:32:18.198 info <== Disconnect system.user.admin from ::ffff:192.168.178.55 zigbee.0 2024-01-05 12:32:12.812 error Error herdsman start zigbee.0 2024-01-05 12:32:12.812 error Failed to start Zigbee zigbee.0 2024-01-05 12:32:12.812 error Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)" zigbee.0 2024-01-05 12:32:05.356 info List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}] zigbee.0 2024-01-05 12:32:05.235 error getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups') -
will leider nicht
zigbee.0 2024-01-05 12:32:22.961 error Error herdsman start zigbee.0 2024-01-05 12:32:22.961 error Failed to start Zigbee zigbee.0 2024-01-05 12:32:22.961 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" zigbee.0 2024-01-05 12:32:22.824 info Installed Version: iobroker.zigbee@1.9.5 zigbee.0 2024-01-05 12:32:22.816 info Starting Zigbee npm ... zigbee.0 2024-01-05 12:32:22.815 info Try to reconnect. 1 attempts left admin.0 2024-01-05 12:32:18.198 info <== Disconnect system.user.admin from ::ffff:192.168.178.55 admin.0 2024-01-05 12:32:18.198 info <== Disconnect system.user.admin from ::ffff:192.168.178.55 zigbee.0 2024-01-05 12:32:12.812 error Error herdsman start zigbee.0 2024-01-05 12:32:12.812 error Failed to start Zigbee zigbee.0 2024-01-05 12:32:12.812 error Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)" zigbee.0 2024-01-05 12:32:05.356 info List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}] zigbee.0 2024-01-05 12:32:05.235 error getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')Ich vermute es hat was mit der neuen TI Platine zu tun.
Wenn ich den alten Stick von Arteck anschliesse funzt es auch nach Neustart.
@arteck hast Du eine Idee wie ich das Board richtig einbinde. Geflasht wurde es wie oben beschrieben
Ich kann nur so viel sagen dass ich mit dem TI Board nach jedem neustart ein port problem bekomme
Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" -
Ich vermute es hat was mit der neuen TI Platine zu tun.
Wenn ich den alten Stick von Arteck anschliesse funzt es auch nach Neustart.
@arteck hast Du eine Idee wie ich das Board richtig einbinde. Geflasht wurde es wie oben beschrieben
Ich kann nur so viel sagen dass ich mit dem TI Board nach jedem neustart ein port problem bekomme
Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"Ich kenne das Ding nicht, wie wird das denn angebunden? Über einen Seriellen Port?
-
Ich kenne das Ding nicht, wie wird das denn angebunden? Über einen Seriellen Port?
ich sag einfach mal ja hab aber wenig ahnung.
vor 2 Jahren konnte ich die platine noch in nem anderen system ohne probleme einbinden.
die neuere revision eben nicht -
Ich kenne das Ding nicht, wie wird das denn angebunden? Über einen Seriellen Port?
Ich denke, hier ist der Wurm drin, oder?
20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 PackagesProxmox und HA
-
Ich denke, hier ist der Wurm drin, oder?
20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 PackagesDas ist bereits geändert worden:
v18.19.0 has been installed! You are using the latest version now! -
ich sag einfach mal ja hab aber wenig ahnung.
vor 2 Jahren konnte ich die platine noch in nem anderen system ohne probleme einbinden.
die neuere revision eben nichtMach zur Sicherheit noch:
echo -e "Package: nodejs\nPin: origin deb.nodesource.com\nPin-Priority: 1001" | sudo tee /etc/apt/preferences.d/nodejs.pref sudo apt update iob stop sudo apt install nodejs=18.19.0-1nodesource1 iob start -
Mach zur Sicherheit noch:
echo -e "Package: nodejs\nPin: origin deb.nodesource.com\nPin-Priority: 1001" | sudo tee /etc/apt/preferences.d/nodejs.pref sudo apt update iob stop sudo apt install nodejs=18.19.0-1nodesource1 iob startIch hab das System nochmal komplett neu mit nodejs18 aufgesetzt und den alten Stick in Betrieb genommen.
Vielleicht hat noch jemand die neuere ti Platine mit der config und kann was dazu sagen.
Ich teste das Teil die Tage mal an einem PI4 mit buster und schau ob's damit läuft
Würde mich dann nochmal melden. Danke Euch
-
Bist du weitergekommen?
Gleiches Problem bei mir, nach Update vom Zigbee Adapter und nodejs funtioniert der Zigbee Adapter nicht mehr.
Bei mir mit dem raspbee als Aufsteckplatine.Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: pi-iobroker Icon name: computer Operating System: Raspbian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: armhf Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs and npm Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.2G 749M 7.1G 1.2M 477M 7.4G Swap: 104M 0B 104M Total: 8.3G 749M 7.2G Active iob-Instances: 9 Active repo(s): stable ioBroker Core: js-controller 5.0.17 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : pi-iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin Objects: 1713 States: 1506 Size of iob-Database: 19M /opt/iobroker/iobroker-data/objects.jsonl 2.7M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================Was mich wundert ist das hier:
USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':find: '/dev/serial/by-id/': No such file or directory
Irgendwie wird die Platine nicht mehr erkannt. Das passiert bei zwei Systemen bei mir, jeweils Rasperry Pi 3 und raspbee.
-
Bist du weitergekommen?
Gleiches Problem bei mir, nach Update vom Zigbee Adapter und nodejs funtioniert der Zigbee Adapter nicht mehr.
Bei mir mit dem raspbee als Aufsteckplatine.Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: pi-iobroker Icon name: computer Operating System: Raspbian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: armhf Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs and npm Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.2G 749M 7.1G 1.2M 477M 7.4G Swap: 104M 0B 104M Total: 8.3G 749M 7.2G Active iob-Instances: 9 Active repo(s): stable ioBroker Core: js-controller 5.0.17 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : pi-iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin Objects: 1713 States: 1506 Size of iob-Database: 19M /opt/iobroker/iobroker-data/objects.jsonl 2.7M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================Was mich wundert ist das hier:
USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':find: '/dev/serial/by-id/': No such file or directory
Irgendwie wird die Platine nicht mehr erkannt. Das passiert bei zwei Systemen bei mir, jeweils Rasperry Pi 3 und raspbee.
@bigchris sagte in Error herdsman start Failed to start Zigbee:
Irgendwie wird die Platine nicht mehr erkannt.
An der Stelle dürfte die noch nie erkannt worden sein. Da tauchen nur USB-Geräte auf. Du hast doch da ein IP-basiertes Ding laufen, oder?
-
@bigchris sagte in Error herdsman start Failed to start Zigbee:
Irgendwie wird die Platine nicht mehr erkannt.
An der Stelle dürfte die noch nie erkannt worden sein. Da tauchen nur USB-Geräte auf. Du hast doch da ein IP-basiertes Ding laufen, oder?
@thomas-braun Im ersten Logging finde ich "/dev/ttyACM0" das deutet doch auf USB hin, oder?
Braille-Reader Service?
Intel(R) Celeron(R) CPU N3000 @ 1.04GHz 8G RAM 480G SSD
Virtualization : unprivileged lxc container (debian 12 on Proxmox 8.4.14)
Linux pve 6.8.12-16-pve
6 GByte RAM für den Container
Fritzbox 6591 FW 8.03 (Vodafone Leih-Box)
Remote-Access über Wireguard der Fritzbox -
@thomas-braun Im ersten Logging finde ich "/dev/ttyACM0" das deutet doch auf USB hin, oder?
Braille-Reader Service?
Gerade über 'raspbee' gestolpert...
@BigChris : Hast du insudo raspi-configauch die Serielle Schnittstelle freigeschaltet?
-
Gerade über 'raspbee' gestolpert...
@BigChris : Hast du insudo raspi-configauch die Serielle Schnittstelle freigeschaltet?
@thomas-braun Für solche Sachen bin ich auch Spezialist - solche "Unterbau-Vorbereitungen", die man vor Urzeiten mal gemacht hat vergesse ich auch regelmäßig bei Umzügen ...
Intel(R) Celeron(R) CPU N3000 @ 1.04GHz 8G RAM 480G SSD
Virtualization : unprivileged lxc container (debian 12 on Proxmox 8.4.14)
Linux pve 6.8.12-16-pve
6 GByte RAM für den Container
Fritzbox 6591 FW 8.03 (Vodafone Leih-Box)
Remote-Access über Wireguard der Fritzbox -
@thomas-braun Für solche Sachen bin ich auch Spezialist - solche "Unterbau-Vorbereitungen", die man vor Urzeiten mal gemacht hat vergesse ich auch regelmäßig bei Umzügen ...
Es gibt Leute, die führen Buch über Änderungen / Ergänzungen am System.
Support us
310
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge