Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[spaddel]

@thomas-braun
Ich habe den kompletten Inhalt aus Putty kopiert. Mehr war da nicht. Ich starte es noch mal und poste es.
Gruß

[Thomas Braun]

@spaddel

Das log liegt auch in /home/iobroker/iob_diag.log herum.

[mcm1957]

samsung_tizen ist als 1.0.0 im repo verfügbar. Diese Release ist für js-controlelr 5 auch erforderlich.

[Thomas Braun]

@mcm57 sagte in js controller update nicht möglich:

samsung_tizen ist als 1.0.0 im repo verfügbar. Diese Release ist für js-controlelr 5 auch erforderlich.

Ja, das ist aber bei weitem nicht der einzige Fehler im Tree.

[mcm1957]

@thomas-braun
Nö - wollt nur die Info gleich mal deponieren.
Was da alles im npm tree nicht passt - keine Ahnung. Da kannst du sicher besser helfen.

[Thomas Braun]

@mcm57 sagte in js controller update nicht möglich:

Da kannst du sicher besser helfen.

Da ist so viel... Muss mal schauen was da noch geht.

[spaddel]

@thomas-braun
Zweiter Versuch
iob_diag.log

[Thomas Braun]

@spaddel

Höchste Zeit das Ding komplett neuauzusetzen.
Als Bookworm-64Bit-Version 'Lite'.

Versuch

find "/opt/iobroker/" -iname "*package-lock*" -exec rm -rf "{}" \;

dann

iob update 
iob upgrade

[spaddel]

@thomas-braun
Wenn ich die Kommentare lese scheint einiges im Argen zu sein. Wie kann ich das System sauber neu aufsetzen. Wenn ich mich richtig erinnere, habe ich damals eine Anleitung von verdrahtet.info auf youtube verwendet.

Gruß
CHristian

[Thomas Braun]

@spaddel

https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht

Zu allem was da sonst noch läuft musst du dir aber selber Gedanken machen.

[spaddel]

@thomas-braun
Danke für den Link.

Nach dem o.g. Befehlen sind die Adapter wieder auf Stand aber der js-controller steht noch auf 4.0.24. Kann ich jetzt den vorgeschlagenen Weg gehen?
cd /opt/iobroker/
sudo iobroker stop
sudo iobroker update
sudo iobroker upgrade self
sudo iobroker start

Gruß
Christian

[Thomas Braun]

@spaddel

Zeig

iob update

[spaddel]

@thomas-braun

pi@raspberrypi:/ $ iob update
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "bmw"          : 2.5.7    , installed 2.5.7
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "fritzbox"     : 0.5.0    , installed 0.5.0
Adapter    "hm-rega"      : 3.0.47   , installed 3.0.47
Adapter    "hm-rpc"       : 1.15.19  , installed 1.15.19
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.12   , installed 4.0.24 [Updatable]
Adapter    "lgtv"         : 2.1.1    , installed 2.1.1
Adapter    "onkyo"        : 2.1.2    , installed 2.1.2
Adapter    "parser"       : 1.3.2    , installed 1.3.2
Adapter    "samsung"      : 0.5.11   , installed 0.5.11
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.5.5    , installed 6.5.5
Adapter    "sonos"        : 2.3.1    , installed 2.3.1
Adapter    "synology"     : 3.0.0    , installed 3.0.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-keyboard" : 0.0.2    , installed 0.0.2
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "web"          : 6.1.2    , installed 6.1.2
Adapter    "ws"           : 2.5.5    , installed 2.5.5
pi@raspberrypi:/ $

[Thomas Braun]

@spaddel

OHNE sudo!!!

iob stop
iob fix
iob upgrade self
iob start

[Thomas Braun]

@spaddel

Und warum hat der arme pi kein Zuhause?

cd

[spaddel]

@thomas-braun
Hi Thomas,

vielen Dank für deine Hilfe. Jetzt ist zumindest alles wieder auf Stand. Allerdings habe ich noch ein paar Fragen, um zu vermeiden, dass ich beim nächsten Mal wieder so ein Chaos anstelle. Wenn ich pivccu und IObroker auf einem System laufen habe, wie kann ich dann am besten ein Update des Systems machen. Wie oben geschrieben?

iob stop
iob fix
iob upgrade self
iob start

Zudem habe ich nicht kapiert, woran ihr festgemacht habt, dass das System schlecht aussieht. Und wie kann ich das in Zukunft vermeiden?

Besten Dank für den super Support.
Christian

[Thomas Braun]

@spaddel

Woran man sieht, dass das Ding windschief ist?

Dann ist die Datei zu groß -> Zu viele Fehler.

Gib jetzt nochmal die Langfassung von

iob diag

zum Besten. Das müsste ja jetzt bedeutend besser direkt in's Forum passen.

[spaddel]

@thomas-braun

======== Start marking the full check here =========


Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 21:43:51 up 1 day, 32 min,  1 user,  load average: 0.10, 0.41, 1.18
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Wed 2023-11-01 21:43:51 CET
           Universal time: Wed 2023-11-01 20:43:51 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           3.8G        1.1G        757M         24M        2.0G        2.6G
Swap:           99M          0B         99M
Total:         3.9G        1.1G        857M

         3838 M total memory
         1058 M used memory
          857 M active memory
         1982 M inactive memory
          757 M free memory
          368 M buffer memory
         1654 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G  9.0G   19G  33% /
devtmpfs       devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     1.9G   25M  1.9G   2% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     384M     0  384M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Oct 31 21:11:41 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:58:37:7E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=e52a9d10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[Tue Oct 31 21:11:41 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 31 21:11:41 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 31 21:11:43 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET        SOURCE         FSTYPE OPTIONS
/             /dev/mmcblk0p2 ext4   rw,noatime
|-/sys/fs/bpf none           bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
4.6G    /var/
2.9G    /var/lib
1.5G    /var/cache/apt/archives
1.5G    /var/cache/apt
1.5G    /var/cache

Archived and active journals take up 23.9M in the file system.

/opt/iobroker/backups:
22M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
318M    /opt/iobroker/iobroker-data/
133M    /opt/iobroker/iobroker-data/files
102M    /opt/iobroker/iobroker-data/sonosCache
67M     /opt/iobroker/iobroker-data/backup-objects
52M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js
7.1M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.f22de4ab.chunk.js.map
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
6.1M    /opt/iobroker/iobroker-data/objects.jsonl

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.2
/usr/bin/node           v18.18.2
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 18.18.2-1nodesource1
  Candidate: 18.18.2-1nodesource1
  Version table:
 *** 18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.samsung_tizen@0.0.12 /opt/iobroker/node_modules/iobroker.samsung_tizen
npm ERR! invalid: iobroker.samsung2016@0.0.2 /opt/iobroker/node_modules/iobroker.samsung2016
npm ERR! invalid: eiscp@0.0.1 /opt/iobroker/node_modules/eiscp
npm ERR! invalid: samsungtv@0.0.0 /opt/iobroker/node_modules/samsungtv
npm ERR! invalid: syno@3.0.0 /opt/iobroker/node_modules/syno
npm ERR! invalid: xmlbuilder@0.4.2 /opt/iobroker/node_modules/homematic-xmlrpc/node_modules/xmlbuilder

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-11-01T20_43_59_663Z-debug-0.log

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.12
admin:          6.12.0
javascript:     7.1.4

npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.samsung_tizen@0.0.12 /opt/iobroker/node_modules/iobroker.samsung_tizen
npm ERR! invalid: iobroker.samsung2016@0.0.2 /opt/iobroker/node_modules/iobroker.samsung2016

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-11-01T20_44_15_984Z-debug-0.log
Adapters from github:   2

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.bmw.0                    : bmw                   : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : raspberrypi                              -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
  system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.lgtv.0                   : lgtv                  : raspberrypi                              -  enabled
+ system.adapter.onkyo.0                  : onkyo                 : raspberrypi                              -  enabled
  system.adapter.samsung.0                : samsung               : raspberrypi                              -  enabled
  system.adapter.samsung.1                : samsung               : raspberrypi                              -  enabled
+ system.adapter.sonos.0                  : sonos                 : raspberrypi                              -  enabled
+ system.adapter.synology.0               : synology              : raspberrypi                              -  enabled, port: 5000
  system.adapter.vis-bars.0               : vis-bars              : raspberrypi                              -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : raspberrypi                              -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi                              -  enabled
  system.adapter.vis-keyboard.0           : vis-keyboard          : raspberrypi                              -  enabled
  system.adapter.vis-metro.0              : vis-metro             : raspberrypi                              -  enabled
  system.adapter.vis-players.0            : vis-players           : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
  system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.synology.0               : synology              : raspberrypi                              -  enabled, port: 5000
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "bmw"          : 2.5.7    , installed 2.5.7
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "fritzbox"     : 0.5.0    , installed 0.5.0
Adapter    "hm-rega"      : 3.0.47   , installed 3.0.47
Adapter    "hm-rpc"       : 1.15.19  , installed 1.15.19
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "lgtv"         : 2.1.1    , installed 2.1.1
Adapter    "onkyo"        : 2.1.2    , installed 2.1.2
Adapter    "parser"       : 1.3.2    , installed 1.3.2
Adapter    "samsung"      : 0.5.11   , installed 0.5.11
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.5.5    , installed 6.5.5
Adapter    "sonos"        : 2.3.1    , installed 2.3.1
Adapter    "synology"     : 3.0.0    , installed 3.0.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-keyboard" : 0.0.2    , installed 0.0.2
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "web"          : 6.1.2    , installed 6.1.2
Adapter    "ws"           : 2.5.5    , installed 2.5.5

Objects and States
Please stand by - This may take a while
Objects:        2757
States:         2430

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:5 https://apt.pivccu.de/piVCCU stable InRelease
Hit:3 https://dl.ui.com/unifi/debian stable InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 192.168.2.35:2001       0.0.0.0:*               LISTEN      1001       1079846    323/io.hm-rpc.0
tcp        0      0 127.0.0.1:28017         0.0.0.0:*               LISTEN      109        17672      387/mongod
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          17819      626/sshd
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       1076886    32663/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       1076879    32663/iobroker.js-c
tcp        0      0 127.0.0.1:27017         0.0.0.0:*               LISTEN      109        16739      387/mongod
tcp        0      0 127.0.0.1:27117         0.0.0.0:*               LISTEN      110        20983      1644/bin/mongod
tcp6       0      0 :::8880                 :::*                    LISTEN      110        18391      1242/java
tcp6       0      0 :::8080                 :::*                    LISTEN      110        18390      1242/java
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       1076937    32755/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       1081421    933/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          17821      626/sshd
tcp6       0      0 :::8443                 :::*                    LISTEN      110        20642      1242/java
tcp6       0      0 :::6789                 :::*                    LISTEN      110        23250      1242/java
tcp6       0      0 :::8843                 :::*                    LISTEN      110        19099      1242/java
tcp6       0      0 :::3500                 :::*                    LISTEN      1001       1077061    444/io.sonos.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          15550      447/dhclient
udp        0      0 0.0.0.0:48756           0.0.0.0:*                           108        17646      384/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        17644      384/avahi-daemon: r
udp6       0      0 :::3478                 :::*                                110        23246      1242/java
udp6       0      0 :::43447                :::*                                108        17647      384/avahi-daemon: r
udp6       0      0 192.168.2.35:52159      :::*                                110        23111      1242/java
udp6       0      0 :::5353                 :::*                                108        17645      384/avahi-daemon: r
udp6       0      0 :::10001                :::*                                110        23112      1242/java

*** Log File - Last 25 Lines ***

2023-11-01 21:45:11.345  - error: hm-rpc.1 (9265) uncaught exception: listen EADDRNOTAVAIL: address not available 192.168.2.29:8701
2023-11-01 21:45:11.346  - error: hm-rpc.1 (9265) Error: listen EADDRNOTAVAIL: address not available 192.168.2.29:8701
    at Server.setupListenHandle [as _listen2] (node:net:1800:21)
    at listenInCluster (node:net:1865:12)
    at doListen (node:net:2014:7)
    at processTicksAndRejections (node:internal/process/task_queues:83:21)
2023-11-01 21:45:11.347  - error: hm-rpc.1 (9265) Exception-Code: EADDRNOTAVAIL: listen EADDRNOTAVAIL: address not available 192.168.2.29:8701
2023-11-01 21:45:11.389  - info: hm-rpc.1 (9265) terminating
2023-11-01 21:45:11.392  - warn: hm-rpc.1 (9265) Terminated (UNCAUGHT_EXCEPTION): Without reason
2023-11-01 21:45:11.406  - info: hm-rpc.1 (9265) xmlrpc server is trying to listen on 192.168.2.29:8701
2023-11-01 21:45:11.407  - info: hm-rpc.1 (9265) xmlrpc client is trying to connect to 192.168.2.30:8701/ with ["http://192.168.2.29:8701","raspberrypi:hm-rpc.1:7a9e8c6352b649f83463b5b1400929e5"]
2023-11-01 21:45:11.675  - error: host.raspberrypi Caught by controller[0]: Error: listen EADDRNOTAVAIL: address not available 192.168.2.29:8701
2023-11-01 21:45:11.689  - error: host.raspberrypi Caught by controller[0]:     at Server.setupListenHandle [as _listen2] (node:net:1800:21)
2023-11-01 21:45:11.689  - error: host.raspberrypi Caught by controller[0]:     at listenInCluster (node:net:1865:12)
2023-11-01 21:45:11.690  - error: host.raspberrypi Caught by controller[0]:     at doListen (node:net:2014:7)
2023-11-01 21:45:11.690  - error: host.raspberrypi Caught by controller[0]:     at processTicksAndRejections (node:internal/process/task_queues:83:21) {
2023-11-01 21:45:11.690  - error: host.raspberrypi Caught by controller[0]:   code: 'EADDRNOTAVAIL',
2023-11-01 21:45:11.691  - error: host.raspberrypi Caught by controller[0]:   errno: -99,
2023-11-01 21:45:11.692  - error: host.raspberrypi Caught by controller[0]:   syscall: 'listen',
2023-11-01 21:45:11.692  - error: host.raspberrypi Caught by controller[0]:   address: '192.168.2.29',
2023-11-01 21:45:11.692  - error: host.raspberrypi Caught by controller[0]:   port: 8701
2023-11-01 21:45:11.693  - error: host.raspberrypi Caught by controller[0]: }
2023-11-01 21:45:11.693  - error: host.raspberrypi instance system.adapter.hm-rpc.1 terminated with code 1 (JS_CONTROLLER_STOPPED)
2023-11-01 21:45:11.699  - info: host.raspberrypi Restart adapter system.adapter.hm-rpc.1 because enabled
2023-11-01 21:45:35.419  - info: admin.0 (32755) ==> Connected system.user.admin from ::ffff:192.168.2.31


============ Mark until here for C&P =============

iob diag has finished.

[Thomas Braun]

@spaddel

iobroker url https://github.com/iobroker-community-adapters/ioBroker.samsung_tizen --debug

[spaddel]

@thomas-braun

pi@raspberrypi:~ $ iobroker url https://github.com/iobroker-community-adapters/ioBroker.samsung_tizen --debug
install iobroker-community-adapters/ioBroker.samsung_tizen#40841b79aaaafcb86c59482dc0d8b47bc4b56751
NPM version: 9.8.1
Installing iobroker-community-adapters/ioBroker.samsung_tizen#40841b79aaaafcb86c59482dc0d8b47bc4b56751... (System call)
npm WARN skipping integrity check for git dependency ssh://git@github.com/iobroker-community-adapters/ioBroker.samsung_tizen.git
npm WARN skipping integrity check for git dependency ssh://git@github.com/Stefan0875/iobroker.samsung2016.git

added 1 package, and changed 6 packages in 27s

36 packages are looking for funding
  run `npm fund` for details
upload [1] samsung_tizen.admin /opt/iobroker/node_modules/iobroker.samsung_tizen/admin/index.html index.html text/html
upload [0] samsung_tizen.admin /opt/iobroker/node_modules/iobroker.samsung_tizen/admin/samsung.png samsung.png image/png