NEWS
Was bedeuten die Fehler im log?
ioBroker Allgemein
339
Beiträge
9
Kommentatoren
57.3k
Aufrufe
8
Watching
-
@homoran sagte in Was bedeuten die Fehler im log?:
@krisiun sagte in Was bedeuten die Fehler im log?:
Die Installation läuft dann über die Katze oder?
Bitte lies unbedingt was man dir schreibt!
@mcm57 sagte in Was bedeuten die Fehler im log?:
Bitte mach keine Installationsexperimente sondern installier die 2.0.5 GENAU so wie du die 2.0.3 installiert hast. Nur die Versionsnummer ggF ersetzen.. Wenn dies via lates Repository erfolgt ist, dann warte bitte bis morgen. Github Installationen sind nur für Testsysteme und Tester die sich intensiv in den Internals auskennen geeignet !
mcm57 schreibt doch ich soll den Adapter genau so installieren wie die vorherige Version auch und die habe ich eben über die Katze installiert. Habe ich da wieder was falsch verstanden ?
@krisiun sagte in Was bedeuten die Fehler im log?:
die habe ich eben über die Katze installiert.
dann kannst du sofort genau so installieren und musst nicht bis morgen warten
-
@mcm57 sagte in Was bedeuten die Fehler im log?:
@krisiun said in Was bedeuten die Fehler im log?:
OK danke. Dann warte ich besser bis morgen. Die Installation läuft dann über die Katze oder?
Ich habe geschrieben:
installier die 2.0.5 GENAU so wie du die 2.0.3 installiert hast. Nur die Versionsnummer ggF ersetzen.
Wie hast du die 2.0.3 installiert?
Über die Katze eben
-
@mcm57 sagte in Was bedeuten die Fehler im log?:
@krisiun said in Was bedeuten die Fehler im log?:
OK danke. Dann warte ich besser bis morgen. Die Installation läuft dann über die Katze oder?
Ich habe geschrieben:
installier die 2.0.5 GENAU so wie du die 2.0.3 installiert hast. Nur die Versionsnummer ggF ersetzen.
Wie hast du die 2.0.3 installiert?
Über die Katze eben
@krisiun sagte in Was bedeuten die Fehler im log?:
Über die Katze eben
Wobei das hoffentlich nicht dein Standardweg ist Adapter zu installieren.
-
@krisiun sagte in Was bedeuten die Fehler im log?:
Über die Katze eben
Wobei das hoffentlich nicht dein Standardweg ist Adapter zu installieren.
@thomas-braun sagte in Was bedeuten die Fehler im log?:
@krisiun sagte in Was bedeuten die Fehler im log?:
Über die Katze eben
Wobei das hoffentlich nicht dein Standardweg ist Adapter zu installieren.
Nein ist er nicht :)
-
@krisiun sagte in Was bedeuten die Fehler im log?:
Genau so habe ich die vorherige Version installiert
Soll nur für uns als Info sein !
Bitte die Full Ausgabe von
iob diaghier posten
Synology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
@krisiun sagte in Was bedeuten die Fehler im log?:
@mcm57
Ich hoffe das sind die richtigen Informationen die ich beim issue gepostet habe :face_palm:Hier nochmal
Output ohne aktiven Timer<e2timerlist> <script id="__gaOptOutExtension"/> </e2timerlist>Output mit aktiven Timer:
<e2timerlist> <script id="__gaOptOutExtension"/> <e2timer> <e2servicereference>1:0:19:C35C:2723:F001:FFFF0000:0:0:0:</e2servicereference> <e2servicename>RTL HD</e2servicename> <e2eit>5772</e2eit> <e2name>Ulrich Wetzel - Das Jugendgericht</e2name> <e2description> Wurde Mutter einer Nachhilfeschülerin brutal von Leiter gestoßen? </e2description> <e2descriptionextended> Als die Mutter ihrer Nachhilfeschülerin herausfindet, dass ihr Vater im Gefängnis sitzt, verliert Cindy Bauer ihren Job. Kurz darauf, wird Mutter Bettina bei der Gartenarbeit brutal von einer Leiter gestoßen - mit schmerzhaften Folgen. </e2descriptionextended> <e2disabled>0</e2disabled> <e2timebegin>1695049020</e2timebegin> <e2timeend>1695051310</e2timeend> <e2duration>2290</e2duration> <e2startprepare>1695049000</e2startprepare> <e2justplay>0</e2justplay> <e2afterevent>3</e2afterevent> <e2location>/media/usb/movie/</e2location> <e2tags/> <e2logentries> [(1695043024, 15, 'record time changed, start prepare is now: Mon Sep 18 16:56:40 2023')] </e2logentries> <e2filename/> <e2backoff>0</e2backoff> <e2nextactivation/> <e2firsttryprepare>True</e2firsttryprepare> <e2state>0</e2state> <e2repeated>0</e2repeated> <e2dontsave>0</e2dontsave> <e2cancled>False</e2cancled> <e2toggledisabled>1</e2toggledisabled> <e2toggledisabledimg>off</e2toggledisabledimg> <e2alwayszap>0</e2alwayszap> <e2pipzap>0</e2pipzap> </e2timer> </e2timerlist>Log Fehler:
2023-09-18 16:07:04.122 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 16:07:04.281 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 16:07:04.330 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 16:07:04.462 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString')js-controller v. 5.0.12
enigma2 adapter v. 2.0.3@krisiun sagte in Was bedeuten die Fehler im log?:
Output mit aktiven Timer:
<e2descriptionextended>
Als die Mutter ihrer Nachhilfeschülerin herausfindet, dass ihr Vater im Gefängnis sitzt, verliert Cindy Bauer ihren Job. Kurz darauf, wird Mutter Bettina bei der Gartenarbeit brutal von einer Leiter gestoßen - mit schmerzhaften Folgen.
</e2descriptionextended>
Sorry ... passend zum Thread :grinning: :joy:
Synology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
@krisiun sagte in Was bedeuten die Fehler im log?:
Output mit aktiven Timer:
<e2descriptionextended>
Als die Mutter ihrer Nachhilfeschülerin herausfindet, dass ihr Vater im Gefängnis sitzt, verliert Cindy Bauer ihren Job. Kurz darauf, wird Mutter Bettina bei der Gartenarbeit brutal von einer Leiter gestoßen - mit schmerzhaften Folgen.
</e2descriptionextended>
Sorry ... passend zum Thread :grinning: :joy:
-
@krisiun sagte in Was bedeuten die Fehler im log?:
Output mit aktiven Timer:
<e2descriptionextended>
Als die Mutter ihrer Nachhilfeschülerin herausfindet, dass ihr Vater im Gefängnis sitzt, verliert Cindy Bauer ihren Job. Kurz darauf, wird Mutter Bettina bei der Gartenarbeit brutal von einer Leiter gestoßen - mit schmerzhaften Folgen.
</e2descriptionextended>
Sorry ... passend zum Thread :grinning: :joy:
@glasfaser sagte in Was bedeuten die Fehler im log?:
Sorry ... passend zum Thread
Ja, so wird sinnlos gebashed, Mensch Leute, es geht doch um Hilfestellung ...
Proxmox und HA
-
@krisiun sagte in Was bedeuten die Fehler im log?:
Genau so habe ich die vorherige Version installiert
Soll nur für uns als Info sein !
Bitte die Full Ausgabe von
iob diaghier posten
@glasfaser sagte in Was bedeuten die Fehler im log?:
@krisiun sagte in Was bedeuten die Fehler im log?:
Genau so habe ich die vorherige Version installiert
Soll nur für uns als Info sein !
Bitte die Full Ausgabe von
iob diaghier posten
hab mich vorhin bei der Frage von Thomas schon gewundert dass hier kein einziges iob diag im Thread ist
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@glasfaser sagte in Was bedeuten die Fehler im log?:
Sorry ... passend zum Thread
Ja, so wird sinnlos gebashed, Mensch Leute, es geht doch um Hilfestellung ...
@meister-mopper sagte in Was bedeuten die Fehler im log?:
es geht doch um Hilfestellung ...
Ich denke mal,
ich kann mir es in einem kleinen Rahmen erlauben , da ich hier schon sehr viel @Krisiun in diesem Thread geholfen habe !!Synology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
@glasfaser sagte in Was bedeuten die Fehler im log?:
@krisiun sagte in Was bedeuten die Fehler im log?:
Genau so habe ich die vorherige Version installiert
Soll nur für uns als Info sein !
Bitte die Full Ausgabe von
iob diaghier posten
hab mich vorhin bei der Frage von Thomas schon gewundert dass hier kein einziges iob diag im Thread ist
@homoran sagte in Was bedeuten die Fehler im log?:
dass hier kein einziges iob diag im Thread ist
... dann würde ich vermuten ( Glasmodus ) das dieser Thread aufbläht , deshalb habe ich es mir verkniffen .
Aber ... soll nur für uns als Info sein ;)
-
@krisiun sagte in Was bedeuten die Fehler im log?:
Genau so habe ich die vorherige Version installiert
Soll nur für uns als Info sein !
Bitte die Full Ausgabe von
iob diaghier posten
@glasfaser sagte in Was bedeuten die Fehler im log?:
@krisiun sagte in Was bedeuten die Fehler im log?:
Genau so habe ich die vorherige Version installiert
Soll nur für uns als Info sein !
Bitte die Full Ausgabe von
iob diaghier posten
Das kann etwas dauern
-
@meister-mopper sagte in Was bedeuten die Fehler im log?:
es geht doch um Hilfestellung ...
Ich denke mal,
ich kann mir es in einem kleinen Rahmen erlauben , da ich hier schon sehr viel @Krisiun in diesem Thread geholfen habe !!@glasfaser sagte in Was bedeuten die Fehler im log?:
Ich denke mal,
ich kann mir es in einem kleinen Rahmen erlauben , da ich hier schon sehr viel @Krisiun in diesem Thread geholfen habe !!Das denke ich auch, hast mir ja auch schon geholfen!
Ist aber aus meiner Sicht kein Grund, "mal zur Entspannung loszubashen". Die Situation bleibt nach meiner Meinung im Forum immer dieselbe:
Jemand sucht Hilfe, andere können helfen.
-
@glasfaser sagte in Was bedeuten die Fehler im log?:
@krisiun sagte in Was bedeuten die Fehler im log?:
Genau so habe ich die vorherige Version installiert
Soll nur für uns als Info sein !
Bitte die Full Ausgabe von
iob diaghier posten
Das kann etwas dauern
======== Start marking the full check here =========
Skript v.2023-06-20 *** BASE SYSTEM *** Static hostname: raspberrypi4-iob Icon name: computer Machine ID: 8c5179ae0fd34fc48a6f2953c3c36843 Boot ID: c0c933ce159d4662a0d651d66e267da9 Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 17:51:44 up 7 days, 2:07, 1 user, load average: 0.29, 0.54, 0.51 CPU threads: 4 Raspberry only: throttled=0x80000 Other values than 0x0 hint to temperature/voltage problems temp=63.7'C volt=0.8438V *** Time and Time Zones *** Local time: Mon 2023-09-18 17:51:44 CEST Universal time: Mon 2023-09-18 15:51:44 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.5G 472M 0.0K 791M 1.1G Swap: 99M 60M 39M Total: 3.9G 2.6G 512M 3794 M total memory 2530 M used memory 545 M active memory 2394 M inactive memory 472 M free memory 98 M buffer memory 692 M swap cache 99 M total swap 60 M used swap 39 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 11G 102G 10% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.1M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Sep 11 15:44:08 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B7:59:FB vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4a6902cc-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Sep 11 15:44:09 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Sep 11 15:44:09 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Sep 11 15:44:11 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.2G /var/ 686M /var/log 681M /var/log/journal/8c5179ae0fd34fc48a6f2953c3c36843 681M /var/log/journal 245M /var/cache Archived and active journals take up 680.1M in the file system. /opt/iobroker/backups: 10M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 6.3G /opt/iobroker/iobroker-data/ 5.9G /opt/iobroker/iobroker-data/history 349M /opt/iobroker/iobroker-data/files 88M /opt/iobroker/iobroker-data/files/echarts.admin 83M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl No configuration change needed. Multihost discovery server: disabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 127.0.0.1 States: jsonl on 127.0.0.1 Core adapters versions js-controller: 5.0.12 admin: 6.8.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi4-iob - enabled + system.adapter.backitup.0 : backitup : raspberrypi4-iob - enabled + system.adapter.broadlink2.1 : broadlink2 : raspberrypi4-iob - enabled system.adapter.cloud.0 : cloud : raspberrypi4-iob - disabled + system.adapter.discovery.0 : discovery : raspberrypi4-iob - enabled system.adapter.echarts.0 : echarts : raspberrypi4-iob - disabled + system.adapter.enigma2.0 : enigma2 : raspberrypi4-iob - enabled + system.adapter.firetv.0 : firetv : raspberrypi4-iob - enabled system.adapter.flot.0 : flot : raspberrypi4-iob - enabled + system.adapter.geofency.0 : geofency : raspberrypi4-iob - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.history.0 : history : raspberrypi4-iob - enabled + system.adapter.hmip.0 : hmip : raspberrypi4-iob - enabled + system.adapter.info.0 : info : raspberrypi4-iob - enabled + system.adapter.iot.0 : iot : raspberrypi4-iob - enabled + system.adapter.javascript.0 : javascript : raspberrypi4-iob - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi4-iob - enabled, port: 54321 + system.adapter.parcel.0 : parcel : raspberrypi4-iob - enabled + system.adapter.philips-tv.0 : philips-tv : raspberrypi4-iob - enabled + system.adapter.ping.0 : ping : raspberrypi4-iob - enabled + system.adapter.pushover.0 : pushover : raspberrypi4-iob - enabled + system.adapter.scenes.0 : scenes : raspberrypi4-iob - enabled + system.adapter.shelly.0 : shelly : raspberrypi4-iob - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi4-iob - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi4-iob - enabled + system.adapter.telegram.0 : telegram : raspberrypi4-iob - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi4-iob - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi4-iob - enabled + system.adapter.tuya.0 : tuya : raspberrypi4-iob - enabled system.adapter.vis.0 : vis : raspberrypi4-iob - enabled + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi4-iob - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.geofency.0 : geofency : raspberrypi4-iob - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi4-iob - enabled, port: 54321 + system.adapter.shelly.0 : shelly : raspberrypi4-iob - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi4-iob - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi4-iob - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.10.1 , installed 6.8.0 [Updatable] Adapter "alexa2" : 3.24.1 , installed 3.25.2 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "firetv" : 1.0.0 , installed 1.0.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "history" : 2.2.6 , installed 2.2.6 Adapter "hmip" : 1.20.0 , installed 1.20.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mihome-vacuum": 3.11.0 , installed 3.11.0 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "philips-tv" : 0.5.3 , installed 0.5.3 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and States Please stand by - This may take a while Objects: 9406 States: 7743 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 3 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12755 527/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 2465459 55130/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 2465452 55130/iobroker.js-c tcp 0 0 127.0.0.1:5037 0.0.0.0:* LISTEN 1001 2468180 55577/adb tcp 0 0 0.0.0.0:33505 0.0.0.0:* LISTEN 1001 2469992 56157/io.yahka.0 tcp 0 0 127.0.0.1:35297 0.0.0.0:* LISTEN 1001 2470128 56157/io.yahka.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 3164462 68398/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 2466040 55382/io.sonoff.0 tcp6 0 0 :::22 :::* LISTEN 0 12757 527/sshd: /usr/sbin tcp6 0 0 :::7999 :::* LISTEN 1001 2463517 55267/io.geofency.0 tcp6 0 0 :::8081 :::* LISTEN 1001 2465836 55150/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 3225841 69299/io.web.0 udp 0 0 192.168.178.63:5353 0.0.0.0:* 1001 2467929 55397/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1554 393/avahi-daemon: r udp 0 0 0.0.0.0:36557 0.0.0.0:* 108 1556 393/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 1638 734/dhcpcd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 2464720 55297/io.mihome-vac udp 0 0 0.0.0.0:51566 0.0.0.0:* 1001 2463674 55447/io.broadlink2 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 2466149 55412/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 2466150 55412/io.tuya.0 udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 2463671 55447/io.broadlink2 udp 0 0 0.0.0.0:60165 0.0.0.0:* 1001 2463673 55447/io.broadlink2 udp6 0 0 :::5353 :::* 108 1555 393/avahi-daemon: r udp6 0 0 :::49321 :::* 108 1557 393/avahi-daemon: r udp6 0 0 :::546 :::* 0 1656 734/dhcpcd *** Log File - Last 25 Lines *** 2023-09-18 17:52:39.986 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:40.127 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:40.184 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:40.361 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:43.100 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:43.311 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:43.367 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:43.576 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:47.098 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:47.284 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:47.338 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:47.508 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:51.095 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:51.218 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:51.269 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:51.424 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:53.154 - info: mihome-vacuum.0 (55297) State value to set for "mihome-vacuum.0.info.water_box" has to be type "string" but received type "boolean" 2023-09-18 17:52:55.096 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:55.223 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:55.277 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:55.461 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:59.097 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:59.226 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:59.281 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:59.478 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString')============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
pi@raspberrypi4-iob:~ $
-
======== Start marking the full check here =========
Skript v.2023-06-20 *** BASE SYSTEM *** Static hostname: raspberrypi4-iob Icon name: computer Machine ID: 8c5179ae0fd34fc48a6f2953c3c36843 Boot ID: c0c933ce159d4662a0d651d66e267da9 Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 17:51:44 up 7 days, 2:07, 1 user, load average: 0.29, 0.54, 0.51 CPU threads: 4 Raspberry only: throttled=0x80000 Other values than 0x0 hint to temperature/voltage problems temp=63.7'C volt=0.8438V *** Time and Time Zones *** Local time: Mon 2023-09-18 17:51:44 CEST Universal time: Mon 2023-09-18 15:51:44 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.5G 472M 0.0K 791M 1.1G Swap: 99M 60M 39M Total: 3.9G 2.6G 512M 3794 M total memory 2530 M used memory 545 M active memory 2394 M inactive memory 472 M free memory 98 M buffer memory 692 M swap cache 99 M total swap 60 M used swap 39 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 11G 102G 10% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.1M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Sep 11 15:44:08 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B7:59:FB vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4a6902cc-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Sep 11 15:44:09 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Sep 11 15:44:09 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Sep 11 15:44:11 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.2G /var/ 686M /var/log 681M /var/log/journal/8c5179ae0fd34fc48a6f2953c3c36843 681M /var/log/journal 245M /var/cache Archived and active journals take up 680.1M in the file system. /opt/iobroker/backups: 10M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 6.3G /opt/iobroker/iobroker-data/ 5.9G /opt/iobroker/iobroker-data/history 349M /opt/iobroker/iobroker-data/files 88M /opt/iobroker/iobroker-data/files/echarts.admin 83M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl No configuration change needed. Multihost discovery server: disabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 127.0.0.1 States: jsonl on 127.0.0.1 Core adapters versions js-controller: 5.0.12 admin: 6.8.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi4-iob - enabled + system.adapter.backitup.0 : backitup : raspberrypi4-iob - enabled + system.adapter.broadlink2.1 : broadlink2 : raspberrypi4-iob - enabled system.adapter.cloud.0 : cloud : raspberrypi4-iob - disabled + system.adapter.discovery.0 : discovery : raspberrypi4-iob - enabled system.adapter.echarts.0 : echarts : raspberrypi4-iob - disabled + system.adapter.enigma2.0 : enigma2 : raspberrypi4-iob - enabled + system.adapter.firetv.0 : firetv : raspberrypi4-iob - enabled system.adapter.flot.0 : flot : raspberrypi4-iob - enabled + system.adapter.geofency.0 : geofency : raspberrypi4-iob - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.history.0 : history : raspberrypi4-iob - enabled + system.adapter.hmip.0 : hmip : raspberrypi4-iob - enabled + system.adapter.info.0 : info : raspberrypi4-iob - enabled + system.adapter.iot.0 : iot : raspberrypi4-iob - enabled + system.adapter.javascript.0 : javascript : raspberrypi4-iob - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi4-iob - enabled, port: 54321 + system.adapter.parcel.0 : parcel : raspberrypi4-iob - enabled + system.adapter.philips-tv.0 : philips-tv : raspberrypi4-iob - enabled + system.adapter.ping.0 : ping : raspberrypi4-iob - enabled + system.adapter.pushover.0 : pushover : raspberrypi4-iob - enabled + system.adapter.scenes.0 : scenes : raspberrypi4-iob - enabled + system.adapter.shelly.0 : shelly : raspberrypi4-iob - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi4-iob - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi4-iob - enabled + system.adapter.telegram.0 : telegram : raspberrypi4-iob - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi4-iob - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi4-iob - enabled + system.adapter.tuya.0 : tuya : raspberrypi4-iob - enabled system.adapter.vis.0 : vis : raspberrypi4-iob - enabled + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi4-iob - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.geofency.0 : geofency : raspberrypi4-iob - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi4-iob - enabled, port: 54321 + system.adapter.shelly.0 : shelly : raspberrypi4-iob - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi4-iob - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi4-iob - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.10.1 , installed 6.8.0 [Updatable] Adapter "alexa2" : 3.24.1 , installed 3.25.2 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "firetv" : 1.0.0 , installed 1.0.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "history" : 2.2.6 , installed 2.2.6 Adapter "hmip" : 1.20.0 , installed 1.20.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mihome-vacuum": 3.11.0 , installed 3.11.0 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "philips-tv" : 0.5.3 , installed 0.5.3 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and States Please stand by - This may take a while Objects: 9406 States: 7743 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 3 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12755 527/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 2465459 55130/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 2465452 55130/iobroker.js-c tcp 0 0 127.0.0.1:5037 0.0.0.0:* LISTEN 1001 2468180 55577/adb tcp 0 0 0.0.0.0:33505 0.0.0.0:* LISTEN 1001 2469992 56157/io.yahka.0 tcp 0 0 127.0.0.1:35297 0.0.0.0:* LISTEN 1001 2470128 56157/io.yahka.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 3164462 68398/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 2466040 55382/io.sonoff.0 tcp6 0 0 :::22 :::* LISTEN 0 12757 527/sshd: /usr/sbin tcp6 0 0 :::7999 :::* LISTEN 1001 2463517 55267/io.geofency.0 tcp6 0 0 :::8081 :::* LISTEN 1001 2465836 55150/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 3225841 69299/io.web.0 udp 0 0 192.168.178.63:5353 0.0.0.0:* 1001 2467929 55397/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1554 393/avahi-daemon: r udp 0 0 0.0.0.0:36557 0.0.0.0:* 108 1556 393/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 1638 734/dhcpcd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 2464720 55297/io.mihome-vac udp 0 0 0.0.0.0:51566 0.0.0.0:* 1001 2463674 55447/io.broadlink2 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 2466149 55412/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 2466150 55412/io.tuya.0 udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 2463671 55447/io.broadlink2 udp 0 0 0.0.0.0:60165 0.0.0.0:* 1001 2463673 55447/io.broadlink2 udp6 0 0 :::5353 :::* 108 1555 393/avahi-daemon: r udp6 0 0 :::49321 :::* 108 1557 393/avahi-daemon: r udp6 0 0 :::546 :::* 0 1656 734/dhcpcd *** Log File - Last 25 Lines *** 2023-09-18 17:52:39.986 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:40.127 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:40.184 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:40.361 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:43.100 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:43.311 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:43.367 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:43.576 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:47.098 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:47.284 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:47.338 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:47.508 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:51.095 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:51.218 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:51.269 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:51.424 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:53.154 - info: mihome-vacuum.0 (55297) State value to set for "mihome-vacuum.0.info.water_box" has to be type "string" but received type "boolean" 2023-09-18 17:52:55.096 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:55.223 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:55.277 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:55.461 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:59.097 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:59.226 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:59.281 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:59.478 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString')============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
pi@raspberrypi4-iob:~ $
Wow, das ist mal eine Beitrag für Muskelkater im Scrollfinger.
Wir packen code immer in sogenannte codetags, dann wird es auf Handhelds leserlich
Wenn es zu viel Platz einnimmt, sollte man der Lesbarkeit halber den Spoiler verwenden
Proxmox und HA
-
======== Start marking the full check here =========
Skript v.2023-06-20 *** BASE SYSTEM *** Static hostname: raspberrypi4-iob Icon name: computer Machine ID: 8c5179ae0fd34fc48a6f2953c3c36843 Boot ID: c0c933ce159d4662a0d651d66e267da9 Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 17:51:44 up 7 days, 2:07, 1 user, load average: 0.29, 0.54, 0.51 CPU threads: 4 Raspberry only: throttled=0x80000 Other values than 0x0 hint to temperature/voltage problems temp=63.7'C volt=0.8438V *** Time and Time Zones *** Local time: Mon 2023-09-18 17:51:44 CEST Universal time: Mon 2023-09-18 15:51:44 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.5G 472M 0.0K 791M 1.1G Swap: 99M 60M 39M Total: 3.9G 2.6G 512M 3794 M total memory 2530 M used memory 545 M active memory 2394 M inactive memory 472 M free memory 98 M buffer memory 692 M swap cache 99 M total swap 60 M used swap 39 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 11G 102G 10% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.1M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Sep 11 15:44:08 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B7:59:FB vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4a6902cc-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Sep 11 15:44:09 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Sep 11 15:44:09 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Sep 11 15:44:11 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.2G /var/ 686M /var/log 681M /var/log/journal/8c5179ae0fd34fc48a6f2953c3c36843 681M /var/log/journal 245M /var/cache Archived and active journals take up 680.1M in the file system. /opt/iobroker/backups: 10M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 6.3G /opt/iobroker/iobroker-data/ 5.9G /opt/iobroker/iobroker-data/history 349M /opt/iobroker/iobroker-data/files 88M /opt/iobroker/iobroker-data/files/echarts.admin 83M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl No configuration change needed. Multihost discovery server: disabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 127.0.0.1 States: jsonl on 127.0.0.1 Core adapters versions js-controller: 5.0.12 admin: 6.8.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi4-iob - enabled + system.adapter.backitup.0 : backitup : raspberrypi4-iob - enabled + system.adapter.broadlink2.1 : broadlink2 : raspberrypi4-iob - enabled system.adapter.cloud.0 : cloud : raspberrypi4-iob - disabled + system.adapter.discovery.0 : discovery : raspberrypi4-iob - enabled system.adapter.echarts.0 : echarts : raspberrypi4-iob - disabled + system.adapter.enigma2.0 : enigma2 : raspberrypi4-iob - enabled + system.adapter.firetv.0 : firetv : raspberrypi4-iob - enabled system.adapter.flot.0 : flot : raspberrypi4-iob - enabled + system.adapter.geofency.0 : geofency : raspberrypi4-iob - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.history.0 : history : raspberrypi4-iob - enabled + system.adapter.hmip.0 : hmip : raspberrypi4-iob - enabled + system.adapter.info.0 : info : raspberrypi4-iob - enabled + system.adapter.iot.0 : iot : raspberrypi4-iob - enabled + system.adapter.javascript.0 : javascript : raspberrypi4-iob - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi4-iob - enabled, port: 54321 + system.adapter.parcel.0 : parcel : raspberrypi4-iob - enabled + system.adapter.philips-tv.0 : philips-tv : raspberrypi4-iob - enabled + system.adapter.ping.0 : ping : raspberrypi4-iob - enabled + system.adapter.pushover.0 : pushover : raspberrypi4-iob - enabled + system.adapter.scenes.0 : scenes : raspberrypi4-iob - enabled + system.adapter.shelly.0 : shelly : raspberrypi4-iob - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi4-iob - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi4-iob - enabled + system.adapter.telegram.0 : telegram : raspberrypi4-iob - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi4-iob - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi4-iob - enabled + system.adapter.tuya.0 : tuya : raspberrypi4-iob - enabled system.adapter.vis.0 : vis : raspberrypi4-iob - enabled + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi4-iob - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.geofency.0 : geofency : raspberrypi4-iob - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi4-iob - enabled, port: 54321 + system.adapter.shelly.0 : shelly : raspberrypi4-iob - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi4-iob - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi4-iob - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.10.1 , installed 6.8.0 [Updatable] Adapter "alexa2" : 3.24.1 , installed 3.25.2 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "firetv" : 1.0.0 , installed 1.0.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "history" : 2.2.6 , installed 2.2.6 Adapter "hmip" : 1.20.0 , installed 1.20.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mihome-vacuum": 3.11.0 , installed 3.11.0 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "philips-tv" : 0.5.3 , installed 0.5.3 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and States Please stand by - This may take a while Objects: 9406 States: 7743 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 3 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12755 527/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 2465459 55130/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 2465452 55130/iobroker.js-c tcp 0 0 127.0.0.1:5037 0.0.0.0:* LISTEN 1001 2468180 55577/adb tcp 0 0 0.0.0.0:33505 0.0.0.0:* LISTEN 1001 2469992 56157/io.yahka.0 tcp 0 0 127.0.0.1:35297 0.0.0.0:* LISTEN 1001 2470128 56157/io.yahka.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 3164462 68398/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 2466040 55382/io.sonoff.0 tcp6 0 0 :::22 :::* LISTEN 0 12757 527/sshd: /usr/sbin tcp6 0 0 :::7999 :::* LISTEN 1001 2463517 55267/io.geofency.0 tcp6 0 0 :::8081 :::* LISTEN 1001 2465836 55150/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 3225841 69299/io.web.0 udp 0 0 192.168.178.63:5353 0.0.0.0:* 1001 2467929 55397/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1554 393/avahi-daemon: r udp 0 0 0.0.0.0:36557 0.0.0.0:* 108 1556 393/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 1638 734/dhcpcd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 2464720 55297/io.mihome-vac udp 0 0 0.0.0.0:51566 0.0.0.0:* 1001 2463674 55447/io.broadlink2 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 2466149 55412/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 2466150 55412/io.tuya.0 udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 2463671 55447/io.broadlink2 udp 0 0 0.0.0.0:60165 0.0.0.0:* 1001 2463673 55447/io.broadlink2 udp6 0 0 :::5353 :::* 108 1555 393/avahi-daemon: r udp6 0 0 :::49321 :::* 108 1557 393/avahi-daemon: r udp6 0 0 :::546 :::* 0 1656 734/dhcpcd *** Log File - Last 25 Lines *** 2023-09-18 17:52:39.986 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:40.127 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:40.184 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:40.361 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:43.100 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:43.311 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:43.367 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:43.576 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:47.098 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:47.284 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:47.338 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:47.508 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:51.095 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:51.218 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:51.269 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:51.424 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:53.154 - info: mihome-vacuum.0 (55297) State value to set for "mihome-vacuum.0.info.water_box" has to be type "string" but received type "boolean" 2023-09-18 17:52:55.096 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:55.223 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:55.277 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:55.461 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString') 2023-09-18 17:52:59.097 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.MESSAGE_ANSWER" has to be type "integer" but received type "string" 2023-09-18 17:52:59.226 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTDURATION" has to be type "number" but received type "string" 2023-09-18 17:52:59.281 - info: enigma2.0 (58117) State value to set for "enigma2.0.enigma2.EVENTREMAINING" has to be type "number" but received type "string" 2023-09-18 17:52:59.478 - warn: enigma2.0 (58117) evaluateCommandResponse: TypeError: Cannot read properties of undefined (reading 'toString')============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
pi@raspberrypi4-iob:~ $
@krisiun
Wurde das Log noch mit enigma2 2.0.3 oder schon mir 2.0.5 geschrieben?Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer Danke sagen will, kann nen Kaffee spendieren: https://paypal.me/mcm1957atiobroker
-
Wow, das ist mal eine Beitrag für Muskelkater im Scrollfinger.
Wir packen code immer in sogenannte codetags, dann wird es auf Handhelds leserlich
Wenn es zu viel Platz einnimmt, sollte man der Lesbarkeit halber den Spoiler verwenden
@meister-mopper sagte in Was bedeuten die Fehler im log?:
Wir packen code immer in sogenannte codetags,
hat er!
(aber zu viele :joy: ) -
Wow, das ist mal eine Beitrag für Muskelkater im Scrollfinger.
Wir packen code immer in sogenannte codetags, dann wird es auf Handhelds leserlich
Wenn es zu viel Platz einnimmt, sollte man der Lesbarkeit halber den Spoiler verwenden
@meister-mopper sagte in Was bedeuten die Fehler im log?:
Wow, das ist mal eine Beitrag für Muskelkater im Scrollfinger.
Wir packen code immer in sogenannte codetags, dann wird es auf Handhelds leserlich
Wenn es zu viel Platz einnimmt, sollte man der Lesbarkeit halber den Spoiler verwenden
Ich weiß ich habs auch paar mal versucht aber es hat einfach nicht geklappt
-
@meister-mopper sagte in Was bedeuten die Fehler im log?:
Wow, das ist mal eine Beitrag für Muskelkater im Scrollfinger.
Wir packen code immer in sogenannte codetags, dann wird es auf Handhelds leserlich
Wenn es zu viel Platz einnimmt, sollte man der Lesbarkeit halber den Spoiler verwenden
Ich weiß ich habs auch paar mal versucht aber es hat einfach nicht geklappt
@krisiun die Ausgabe von
iob diagenthält bereits die code tags.
durch zusätzlich gesetzte wird es wieder zerschnittenkein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
867
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge