Nach Systemaktualisierung Modbus Fehler 25

Fabio

@dooley_76 setze die Ausgabe bitte in die Code Tags </> damit man das lesen kann.

Dooley_76

@fa-bio

Irgendwas scheint da gerade bei der Übertragung nicht gefunzt zu haben, also hier nochmal

======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 3 Model B Plus Rev 1.3
Architecture    : armv7l
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 11:25:29 up 9 min,  1 user,  load average: 0.26, 0.26, 0.18
CPU threads: 4

Raspberry only:
throttled=0x80000
Other values than 0x0 hint to temperature/voltage problems
temp=53.7'C
volt=1.3875V

*** Time and Time Zones ***
               Local time: Tue 2023-08-22 11:25:30 BST
           Universal time: Tue 2023-08-22 10:25:30 UTC
                 RTC time: n/a
                Time zone: Europe/London (BST, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            971M         56M        498M        0.0K        415M        849M
Swap:            99M          0B         99M
Total:          1.1G         56M        598M

          971 M total memory
           56 M used memory
          215 M active memory
          165 M inactive memory
          498 M free memory
           56 M buffer memory
          359 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G  3.0G   25G  11% /
devtmpfs       devtmpfs  358M     0  358M   0% /dev
tmpfs          tmpfs     486M     0  486M   0% /dev/shm
tmpfs          tmpfs     195M  920K  194M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
tmpfs          tmpfs      98M     0   98M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Aug 22 11:16:15 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0                                                                                                  data mode. Quota mode: none.
[Tue Aug 22 11:16:18 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Aug 22 11:16:21 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
353M    /var/
94M     /var/lib
90M     /var/log
89M     /var/log/journal/97dfd2004a894a86ab647e0fbc98a3a4
89M     /var/log/journal

Archived and active journals take up 88.0M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
251M    /opt/iobroker/iobroker-data/
245M    /opt/iobroker/iobroker-data/files
88M     /opt/iobroker/iobroker-data/files/echarts.admin
57M     /opt/iobroker/iobroker-data/files/echarts
52M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
23M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map
17M     /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.1b04901d.js.map
17M     /opt/iobroker/iobroker-data/files/echarts.admin/preview/static/js/main.1b04901d.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.8.0
javascript:     7.0.3

Adapters from github:   0

Adapter State
  system.adapter.admin.0                  : admin                 : iobroker-pi                                                                               -  enabled, port: 8081, bind: 0.0.0.0, run as: admi                                                 n
  system.adapter.backitup.0               : backitup              : iobroker-pi                                                                               -  enabled
  system.adapter.chromecast.0             : chromecast            : iobroker-pi                                                                               -  enabled
  system.adapter.discovery.0              : discovery             : iobroker-pi                                                                               -  enabled
  system.adapter.echarts.0                : echarts               : iobroker-pi                                                                               -  enabled
  system.adapter.influxdb.0               : influxdb              : iobroker-pi                                                                               -  enabled, port: 8086
  system.adapter.jarvis.0                 : jarvis                : iobroker-pi                                                                               -  enabled
  system.adapter.javascript.0             : javascript            : iobroker-pi                                                                               -  enabled
  system.adapter.net-tools.0              : net-tools             : iobroker-pi                                                                               - disabled
  system.adapter.ping.0                   : ping                  : iobroker-pi                                                                               - disabled
  system.adapter.synology.0               : synology              : iobroker-pi                                                                               - disabled, port: 5000
  system.adapter.vis.0                    : vis                   : iobroker-pi                                                                               -  enabled
  system.adapter.web.0                    : web                   : iobroker-pi                                                                               -  enabled, port: 8082, bind: 0.0.0.0, run as: admi                                                 n

+ instance is alive

Enabled adapters with bindings
  system.adapter.admin.0                  : admin                 : iobroker-pi                                                                               -  enabled, port: 8081, bind: 0.0.0.0, run as: admi                                                 n
  system.adapter.influxdb.0               : influxdb              : iobroker-pi                                                                               -  enabled, port: 8086
  system.adapter.web.0                    : web                   : iobroker-pi                                                                               -  enabled, port: 8082, bind: 0.0.0.0, run as: admi                                                 n

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.8.0    , installed 6.8.0
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "jarvis"       : 3.1.2    , installed 3.1.2
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "synology"     : 2.1.13   , installed 2.1.13
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        314
States:         240

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode    PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          13764    467/sshd: /usr/sbin
tcp6       0      0 :::22                   :::*                    LISTEN      0          13766    467/sshd: /usr/sbin
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12641    332/avahi-daemon: r
udp        0      0 0.0.0.0:41423           0.0.0.0:*                           108        12643    332/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          11103    663/dhcpcd
udp6       0      0 :::5353                 :::*                                108        12642    332/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          12686    663/dhcpcd
udp6       0      0 :::34871                :::*                                108        12644    332/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-08-22 11:17:00.108  - warn: host.iobroker-pi instance system.adapter.jarvis.0 terminated due to SIGTERM
2023-08-22 11:17:00.106  - info: chromecast.0 (770) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2023-08-22 11:17:00.109  - info: host.iobroker-pi instance system.adapter.jarvis.0 terminated with code null ()
2023-08-22 11:17:00.114  - info: javascript.0 (750) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2023-08-22 11:17:00.115  - info: host.iobroker-pi stopInstance system.adapter.admin.0 send kill signal
2023-08-22 11:17:00.116  - info: host.iobroker-pi stopInstance system.adapter.javascript.0 send kill signal
2023-08-22 11:17:00.117  - info: host.iobroker-pi stopInstance system.adapter.chromecast.0 send kill signal
2023-08-22 11:17:00.117  - info: host.iobroker-pi stopInstance system.adapter.discovery.0 send kill signal
2023-08-22 11:17:00.118  - info: host.iobroker-pi stopInstance system.adapter.backitup.0 send kill signal
2023-08-22 11:17:00.118  - info: host.iobroker-pi stopInstance system.adapter.web.0 send kill signal
2023-08-22 11:17:00.119  - info: host.iobroker-pi stopInstance system.adapter.echarts.0 send kill signal
2023-08-22 11:17:00.119  - info: host.iobroker-pi stopInstance system.adapter.jarvis.0 send kill signal
2023-08-22 11:17:00.159  - info: web.0 (837) terminated http server on port 8082
2023-08-22 11:17:00.171  - info: web.0 (837) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2023-08-22 11:17:00.496  - info: echarts.0 (925) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2023-08-22 11:17:00.787  - info: host.iobroker-pi instance system.adapter.influxdb.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP)
2023-08-22 11:17:00.819  - info: host.iobroker-pi instance system.adapter.backitup.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP)
2023-08-22 11:17:00.890  - info: host.iobroker-pi instance system.adapter.admin.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP)
2023-08-22 11:17:00.892  - info: host.iobroker-pi instance system.adapter.discovery.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP)
2023-08-22 11:17:00.893  - info: host.iobroker-pi instance system.adapter.chromecast.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP)
2023-08-22 11:17:00.929  - info: host.iobroker-pi instance system.adapter.javascript.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP)
2023-08-22 11:17:00.958  - info: host.iobroker-pi instance system.adapter.web.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP)
2023-08-22 11:17:01.059  - info: host.iobroker-pi instance system.adapter.echarts.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP)
2023-08-22 11:17:01.060  - info: host.iobroker-pi All instances are stopped.
2023-08-22 11:17:01.263  - info: host.iobroker-pi terminated

============ Mark until here for C&P =============

Fabio

@dooley_76 okay ich glaube da sollte mal @Thomas-Braun drüber schauen.

Thomas Braun

@dooley_76 sagte in Nach Systemaktualisierung Modbus Fehler 25:

Architecture : armv7l

Frisch aufgesetzt? Ich hätte da dann die 64bit-Version genommen.

Raspberry only:
throttled=0x80000
Other values than 0x0 hint to temperature/voltage problems

Original Netzteil in Verwendung? Das scheint mir zuviel Spannung zu sein.

Time zone: Europe/London (BST, +0100)

Vermutlich die falsche Zeitzone, oder hockst du auf der Insel?

Ansonsten läuft da keine einzige Instanz.

Was sagt:

iobroker add modbus --host iobroker-pi --debug

Dooley_76

@fa-bio

Ok, dann warten wir mal ab ...

Hier noch ein paar Randinformationen, falls die helfen und sich somit hoffentlich keiner unnötig auf einen "Irrweg" begibt:

Aktuell:

Installation des Images von buanet: https://github.com/buanet/ioBroker.raspberry-os/releases

Nach der Installation des Images habe ich mich dann mit Thomas Braun seiner Anleitung weiter gemacht, was die Installation node betrifft: https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian

Leider war es mir nicht möglich, IOBroker manuell zu installieren, da er IMMER mit einem Fehler abgebrochen hat.
Ich weiß die Meldung nicht mehr aus dem Kopf, aber irgendwas mit ... tree ... Im Zweifel kann ich die SD-Karte noch einmal löschen und den Fehler nachstellen, wenn wir so nicht weiter kommen.

Gehalten habe ich mich dabei an folgende Anleitung: https://www.iobroker.net/#de/documentation/install/nodejs.md
Vorher habe ich noch das aktuelle Raspberry Image Lite (64bit) per PI Imager aufgespielt.

Das hat dann auch alles soweit geklappt, alles war auf aktuellem Stand. Nur die Adapter (alle) lassen sich nicht installieren. Alle brechen mit Code 25 ab.

Hier übrigens noch die Struktur:

pi @iobroker-pi: ~$ uname - m && type - P nodejs node npm npx corepack && nodejs - v && node - v && npm - v && npx - v && corepack - v && iob - v && whoami && groups && echo $XDG_SESSION_TYPE && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
armv7l
    / usr / bin / nodejs
    / usr / bin / node
    / usr / bin / npm
    / usr / bin / npx
    / usr / bin / corepack
v18.17.1
v18.17.1
9.6.7
9.6.7
0.18.0
4.0.24
pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker
tty
    / home / pi
Hit: 1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit: 2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit: 3 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...Done
Building dependency tree...Done
Reading state information...Done
All packages are up to date.
    nodejs:
Installed: 18.17.1 - deb - 1nodesource1
Candidate: 18.17.1 - deb - 1nodesource1
  Version table:
 *** 18.17.1 - deb - 1nodesource1 500
500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
100 /var/lib/dpkg / status
12.22.12~dfsg - 1~deb11u4 500
500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Ich hoffe ich habe keinen "Dummy-Fehler" begangen ...

Danke Euch schon einmal im voraus für Eure Mühen ...

Gruß
Holger

Dooley_76

@thomas-braun

Original-Netzteil: Nein, damit habe ich immer Unterspannungsfehler bekommen, welche ich jetzt teilweise auch nocht hatte
Zeitzone: Hatte ich eigentlich eingestellt, aber ich prüfe es nochmal, vielleicht habe ich ja die falsche erwischt.

Hier noch die Ausgabe Deiner Anfrage:

pi @iobroker-pi: ~$ iobroker add modbus--host iobroker - pi--debug
NPM version: 9.6.7
Installing iobroker.modbus@5.0.11... (System call)
npm ERR! code ECONNREFUSED
npm ERR! syscall connect
npm ERR! errno ECONNREFUSED
npm ERR! FetchError: request to https://registry.npmjs.org/iobroker.modbus failed, reason: connect ECONNREFUSED 2606:4700::6810:622:443
npm ERR!     at ClientRequest.< anonymous > (/usr/lib / node_modules / npm / node_modules / minipass - fetch / lib / index.js: 130: 14)
npm ERR!     at ClientRequest.emit(node: events: 514: 28)
npm ERR!     at TLSSocket.socketErrorListener(node: _http_client: 501: 9)
npm ERR!     at TLSSocket.emit(node: events: 526: 35)
npm ERR!     at emitErrorNT(node: internal / streams / destroy: 151: 8)
npm ERR!     at emitErrorCloseNT(node: internal / streams / destroy: 116: 3)
npm ERR!     at process.processTicksAndRejections(node: internal / process / task_queues: 82: 21)
npm ERR!  FetchError: request to https://registry.npmjs.org/iobroker.modbus failed, reason: connect ECONNREFUSED 2606:4700::6810:622:443
npm ERR!     at ClientRequest.< anonymous > (/usr/lib / node_modules / npm / node_modules / minipass - fetch / lib / index.js: 130: 14)
npm ERR!     at ClientRequest.emit(node: events: 514: 28)
npm ERR!     at TLSSocket.socketErrorListener(node: _http_client: 501: 9)
npm ERR!     at TLSSocket.emit(node: events: 526: 35)
npm ERR!     at emitErrorNT(node: internal / streams / destroy: 151: 8)
npm ERR!     at emitErrorCloseNT(node: internal / streams / destroy: 116: 3)
npm ERR!     at process.processTicksAndRejections(node: internal / process / task_queues: 82: 21) {
npm ERR!   code: 'ECONNREFUSED',
        npm ERR!   errno: 'ECONNREFUSED',
            npm ERR!   syscall: 'connect',
                npm ERR!   address: '2606:4700::6810:622',
                    npm ERR!   port: 443,
                        npm ERR!   type: 'system',
                            npm ERR!   requiredBy: '.'
npm ERR!
}
npm ERR!
npm ERR! If you are behind a proxy, please make sure that the
npm ERR! 'proxy' config is set properly.See: 'npm help config'

npm ERR! A complete log of this run can be found in: /home/iobroker /.npm / _logs / 2023 - 08 - 22T11_21_24_839Z - debug - 0.log
host.iobroker - pi Cannot install iobroker.modbus@5.0.11: 1

Danke,
Gruß Holger

Homoran

@dooley_76 sagte in Nach Systemaktualisierung Modbus Fehler 25:

irgendwas mit ... tree ... I

das wird im von @fa-bio verlinkten Beitrag zum Error 25 gefixt

Dooley_76

@homoran

Danke, den hatte ich auch gefunden und probiert: ( https://forum.iobroker.net/topic/57337/fehler-25-217-oder-enotempty-bei-adapter-install-update/2 )

leider ohne Erfolg

Gruß
Holger

Thomas Braun

@dooley_76

Ich würde die Kiste nochmal ganz neu aufsetzen. Keine iob-Images, keine manuelle Installation von nodejs usw, dafür direkt mit einem user, der weder pi noch iobroker heißt und mit der richtigen Zeitzone:

https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht

Da ist auch was beim Netzwerk 'krumm'. Kann sein, dass da schon die falsche Zeitzone reinspielt.

Dooley_76

@thomas-braun

Ok, dann mache ich das mal. Hab es jetzt schon so oft gemacht, da kommt es auf einmal mehr auch nicht mehr an ;))

Danke und ich melde mich dann wieder zwecks Rückmeldung ...

Gruß
Holger

Thomas Braun

@dooley_76

Aber irgendwas machst du falsch, denn

Vorher habe ich noch das aktuelle Raspberry Image Lite (64bit) per PI Imager aufgespielt.

führt nicht zu armv7l. Das ist die 32bit-Version.

Dooley_76

@thomas-braun

Da habe ich mich vielleicht unglücklich bzw. falsch ausgedrückt:

Ich habe es einmal mit dem "original" Image per Imager versucht (Raspberry 64bit Lite)

und dann versucht IOBroker zu installieren, was dann ja immer nicht funktioniert hat.

Danach erst habe ich das Image genommen, welches jetzt läuft und das ist wohl kein 64bit.

Gruß
Holger

Thomas Braun

@dooley_76 sagte in Nach Systemaktualisierung Modbus Fehler 25:

und dann versucht IOBroker zu installieren, was dann ja immer nicht funktioniert hat.

Warum nicht?
Hier nach geht das:

https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht

Dooley_76

@thomas-braun

Hallo Thomas,

vielleicht habe ich bei der letzten Installation eine andere Anleitung bzw. andere Befehle benutzt, die da standen. Ganz sicher bin ich mir aber mittlerweile nicht mehr. Ich habe den Pi jetzt seit heute morgen bestimmt schon 10-15 mal neu installiert, immer wieder mit anderen Anleitungen/Wegen/Versuchen, bis ich mich in meiner Verzweiflung an Euch gewandt habe.

Aber ich bin gerade dabei, es jetzt noch einmal nach Deiner Anleitung zu machen und werde ich auch strikt daran halten
Ich geb' Bescheid ...

Gruß
Holger

P.S.: Wenn das dann wirklich gleich laufen sollte mach' ich alles aus, nimm' mir ein Bier, setz' mich nach draußen und heul

Dooley_76

@dooley_76

Jetzt bin ich ja "beruhigt" ;)) Ich hänge wieder da, wo es vorher auch schon nicht weiter ging, wenn ich IOBroker ( per curl -sLf https://iobroker.net/install.sh | bash - ) aufspiele:

Wenn ich nichts mache, geht es nach ~ 5-6 Minuten "weiter" und es kommt dieses hier:

Holger @raspberryiobroker: ~$ curl - sLf https://iobroker.net/install.sh | bash -
library: loaded
Library version = 2022 - 12 - 09

==========================================================================

    Welcome to the ioBroker installer!
    Installer version: 2023-04-16

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/4)
==========================================================================

Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists... Done

==========================================================================

    Node.js not found. Installing...

==========================================================================


## Installing the NodeSource Node.js 18.x repo...


## Populating apt-get cache...

+ apt-get update
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists... Done

## Confirming "bullseye" is supported...

+ curl -sLf -o /dev/null 'https://deb.nodesource.com/node_18.x/dists/bullseye/Re            lease'

## Adding the NodeSource signing key to your keyring...

+ curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | gpg --dearmor |             tee /usr/share/keyrings/nodesource.gpg >/dev/null

## Creating apt sources list file for the NodeSource Node.js 18.x repo...

+ echo 'deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesourc            e.com/node_18.x bullseye main' > /etc/apt/sources.list.d/nodesource.list
+ echo 'deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodes            ource.com/node_18.x bullseye main' >> /etc/apt/sources.list.d/nodesource.list

## Running `apt-get update` for you...

+ apt-get update
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Get:2 https://deb.nodesource.com/node_18.x bullseye InRelease [4,586 B]
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://deb.debian.org/debian bullseye InRelease
Hit:5 http://deb.debian.org/debian bullseye-updates InRelease
Get:6 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages [776 B]
Get:7 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages [787 B]
Fetched 6,149 B in 2s (2,634 B/s)
Reading package lists... Done

## Run `sudo apt-get install -y nodejs` to install Node.js 18.x and npm
## You may also need development tools to build native addons:
     sudo apt-get install gcc g++ make
## To install the Yarn package manager, run:
     curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | gpg --dearmor | sudo te            e /usr/share/keyrings/yarnkey.gpg >/dev/null
     echo "deb [signed-by=/usr/share/keyrings/yarnkey.gpg] https://dl.yarnpkg.co            m/debian stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
     sudo apt-get update && sudo apt-get install yarn


Installed nodejs
Node.js Installed successfully!
Changing npm registry to https://registry.npmjs.org
Installed acl
Installed gcc-c++
Installed libavahi-compat-libdnssd-dev
Installed libudev-dev
Installed libpam0g-dev
Installed git
Installed libcairo2-dev
Installed libpango1.0-dev
Installed libjpeg-dev
Installed libgif-dev
Installed librsvg2-dev
Installed cmake

==========================================================================
    Creating ioBroker user and directory (2/4)
==========================================================================

User iobroker created
Created /etc/sudoers.d/iobroker
Directory /opt/iobroker created

==========================================================================
    Installing ioBroker (3/4)
==========================================================================

npm ERR! code ECONNREFUSED
npm ERR! syscall connect
npm ERR! errno ECONNREFUSED
npm ERR! FetchError: request to https://registry.npmjs.org/iobroker.admin failed            , reason: connect ECONNREFUSED 2606:4700::6810:b22:443
npm ERR!     at ClientRequest.<anonymous> (/usr/lib/node_modules/npm/node_module            s/minipass-fetch/lib/index.js:130:14)
npm ERR!     at ClientRequest.emit (node:events:514:28)
npm ERR!     at TLSSocket.socketErrorListener (node:_http_client:501:9)
npm ERR!     at TLSSocket.emit (node:events:526:35)
npm ERR!     at emitErrorNT (node:internal/streams/destroy:151:8)
npm ERR!     at emitErrorCloseNT (node:internal/streams/destroy:116:3)
npm ERR!     at process.processTicksAndRejections (node:internal/process/task_qu            eues:82:21)
npm ERR!  FetchError: request to https://registry.npmjs.org/iobroker.admin faile            d, reason: connect ECONNREFUSED 2606:4700::6810:b22:443
npm ERR!     at ClientRequest.<anonymous> (/usr/lib/node_modules/npm/node_module            s/minipass-fetch/lib/index.js:130:14)
npm ERR!     at ClientRequest.emit (node:events:514:28)
npm ERR!     at TLSSocket.socketErrorListener (node:_http_client:501:9)
npm ERR!     at TLSSocket.emit (node:events:526:35)
npm ERR!     at emitErrorNT (node:internal/streams/destroy:151:8)
npm ERR!     at emitErrorCloseNT (node:internal/streams/destroy:116:3)
npm ERR!     at process.processTicksAndRejections (node:internal/process/task_qu            eues:82:21) {
npm ERR!   code: 'ECONNREFUSED',
npm ERR!   errno: 'ECONNREFUSED',
npm ERR!   syscall: 'connect',
npm ERR!   address: '2606:4700::6810:b22',
npm ERR!   port: 443,
npm ERR!   type: 'system',
npm ERR!   requiredBy: '.'
npm ERR! }
npm ERR!
npm ERR! If you are behind a proxy, please make sure that the
npm ERR! 'proxy' config is set properly.  See: 'npm help config'

npm ERR! A complete log of this run can be found in: /home/Holger/.npm/_logs/202            3-08-22T12_14_59_986Z-debug-0.log

==========================================================================
    Finalizing installation (4/4)
==========================================================================

Enabling autostart...
Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /            lib/systemd/system/iobroker.service.
Autostart enabled!
Fixing directory permissions...

==========================================================================

    ioBroker was installed successfully
    Open http://192.168.0.191:8081 in a browser and start configuring!

==========================================================================


You need to re-login before doing anything else on the console!

Und nu' ... ?

Gruß
Holger

Dooley_76

@dooley_76

Hier noch die diag, falls es helfen sollte:

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 3 Model B Plus Rev 1.3
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 14:26:08 up 17 min,  1 user,  load average: 0.07, 0.20, 0.28
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=54.8'C
volt=1.3813V

*** Time and Time Zones ***
               Local time: Tue 2023-08-22 14:26:08 CEST
           Universal time: Tue 2023-08-22 12:26:08 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
Holger
/home/Holger
Holger adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            909M         79M        223M        0.0K        606M        765M
Swap:            99M          0B         99M
Total:          1.0G         79M        323M

          909 M total memory
           79 M used memory
          125 M active memory
          445 M inactive memory
          223 M free memory
           39 M buffer memory
          567 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G  2.0G   26G   7% /
devtmpfs       devtmpfs  325M     0  325M   0% /dev
tmpfs          tmpfs     455M     0  455M   0% /dev/shm
tmpfs          tmpfs     182M  976K  181M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs      91M     0   91M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Aug 22 14:08:52 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=26b2c4cb-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue Aug 22 14:08:55 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Tue Aug 22 14:08:55 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Aug 22 14:08:58 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
476M    /var/
180M    /var/cache
174M    /var/cache/apt
147M    /var/lib
123M    /var/lib/apt/lists

Archived and active journals take up 48.0M in the file system.

/opt/iobroker/backups:
du: cannot access '/opt/iobroker/backups/': No such file or directory

/opt/iobroker/iobroker-data:
du: cannot access '/opt/iobroker/iobroker-data/': No such file or directory

The five largest files in iobroker-data are:
find: '/opt/iobroker/iobroker-data': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

find: '/opt/iobroker/node_modules': No such file or directory
Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Core adapters versions
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1
js-controller:
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1
admin:
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1
javascript:

npm ERR! code ELSPROBLEMS
npm ERR! missing: iobroker.admin@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.backitup@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.discovery@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.js-controller@stable, required by iobroker.inst@3.0.0

npm ERR! A complete log of this run can be found in: /home/Holger/.npm/_logs/2023-08-22T12_26_18_961Z-debug-0.log
Adapters from github:   0

Adapter State
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Enabled adapters with bindings
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

ioBroker-Repositories
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Installed ioBroker-Instances
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Objects and States
Please stand by - This may take a while
Objects:        0
States:         0

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12883      474/sshd: /usr/sbin
tcp6       0      0 :::22                   :::*                    LISTEN      0          12885      474/sshd: /usr/sbin
udp        0      0 0.0.0.0:60377           0.0.0.0:*                           108        13975      354/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14343      602/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        13973      354/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          1654       602/dhcpcd
udp6       0      0 :::5353                 :::*                                108        13974      354/avahi-daemon: r
udp6       0      0 :::43804                :::*                                108        13976      354/avahi-daemon: r

*** Log File - Last 25 Lines ***

tail: cannot open '/opt/iobroker/log/iobroker.current.log' for reading: No such file or directory

============ Mark until here for C&P =============

Dooley_76

@dooley_76

und hier noch das komplette Log-File:

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 3 Model B Plus Rev 1.3
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 14:26:08 up 17 min,  1 user,  load average: 0.07, 0.20, 0.28
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=54.8'C
volt=1.3813V

*** Time and Time Zones ***
               Local time: Tue 2023-08-22 14:26:08 CEST
           Universal time: Tue 2023-08-22 12:26:08 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
Holger
/home/Holger
Holger adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            909M         79M        223M        0.0K        606M        765M
Swap:            99M          0B         99M
Total:          1.0G         79M        323M

          909 M total memory
           79 M used memory
          125 M active memory
          445 M inactive memory
          223 M free memory
           39 M buffer memory
          567 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G  2.0G   26G   7% /
devtmpfs       devtmpfs  325M     0  325M   0% /dev
tmpfs          tmpfs     455M     0  455M   0% /dev/shm
tmpfs          tmpfs     182M  976K  181M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs      91M     0   91M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Aug 22 14:08:52 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=26b2c4cb-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue Aug 22 14:08:55 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Tue Aug 22 14:08:55 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Aug 22 14:08:58 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
476M    /var/
180M    /var/cache
174M    /var/cache/apt
147M    /var/lib
123M    /var/lib/apt/lists

Archived and active journals take up 48.0M in the file system.

/opt/iobroker/backups:
du: cannot access '/opt/iobroker/backups/': No such file or directory

/opt/iobroker/iobroker-data:
du: cannot access '/opt/iobroker/iobroker-data/': No such file or directory

The five largest files in iobroker-data are:
find: '/opt/iobroker/iobroker-data': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

find: '/opt/iobroker/node_modules': No such file or directory
Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Core adapters versions
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1
js-controller:
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1
admin:
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1
javascript:

npm ERR! code ELSPROBLEMS
npm ERR! missing: iobroker.admin@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.backitup@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.discovery@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.js-controller@stable, required by iobroker.inst@3.0.0

npm ERR! A complete log of this run can be found in: /home/Holger/.npm/_logs/2023-08-22T12_26_18_961Z-debug-0.log
Adapters from github:   0

Adapter State
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Enabled adapters with bindings
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

ioBroker-Repositories
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Installed ioBroker-Instances
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Objects and States
Please stand by - This may take a while
Objects:        0
States:         0

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12883      474/sshd: /usr/sbin
tcp6       0      0 :::22                   :::*                    LISTEN      0          12885      474/sshd: /usr/sbin
udp        0      0 0.0.0.0:60377           0.0.0.0:*                           108        13975      354/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14343      602/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        13973      354/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          1654       602/dhcpcd
udp6       0      0 :::5353                 :::*                                108        13974      354/avahi-daemon: r
udp6       0      0 :::43804                :::*                                108        13976      354/avahi-daemon: r

*** Log File - Last 25 Lines ***

tail: cannot open '/opt/iobroker/log/iobroker.current.log' for reading: No such file or directory


============ Mark until here for C&P =============

iob diag has finished.


Press any key for a summary

Holger@raspberryiobroker:~ $ cd /home/Holger/.npm/_logs
Holger@raspberryiobroker:~/.npm/_logs $ dir -a
.                                     2023-08-22T12_26_10_875Z-debug-0.log
..                                    2023-08-22T12_26_12_556Z-debug-0.log
2023-08-22T12_11_53_157Z-debug-0.log  2023-08-22T12_26_14_191Z-debug-0.log
2023-08-22T12_11_54_801Z-debug-0.log  2023-08-22T12_26_15_825Z-debug-0.log
2023-08-22T12_14_59_986Z-debug-0.log  2023-08-22T12_26_18_961Z-debug-0.log
Holger@raspberryiobroker:~/.npm/_logs $ mcedit 2023-08-22T12_26_18_961Z-debug-0.log
-bash: mcedit: command not found
Holger@raspberryiobroker:~/.npm/_logs $ ^C
Holger@raspberryiobroker:~/.npm/_logs $ sudo edit 2023-08-22T12_26_18_961Z-debug-0.log
0 verbose cli /usr/bin/node /usr/bin/npm
1 info using npm@9.6.7
2 info using node@v18.17.1
3 timing npm:load:whichnode Completed in 6ms
4 timing config:load:defaults Completed in 11ms
5 timing config:load:file:/usr/lib/node_modules/npm/npmrc Completed in 5ms
6 timing config:load:builtin Completed in 6ms
7 timing config:load:cli Completed in 14ms
8 timing config:load:env Completed in 3ms
9 timing config:load:file:/opt/iobroker/.npmrc Completed in 9ms
10 timing config:load:project Completed in 32ms
11 timing config:load:file:/home/Holger/.npmrc Completed in 2ms
12 timing config:load:user Completed in 3ms
13 timing config:load:file:/usr/etc/npmrc Completed in 0ms
14 timing config:load:global Completed in 1ms
15 timing config:load:setEnvs Completed in 6ms
16 timing config:load Completed in 80ms
17 timing npm:load:configload Completed in 81ms
18 timing npm:load:mkdirpcache Completed in 2ms
19 timing npm:load:mkdirplogs Completed in 1ms
20 verbose title npm ls
21 verbose argv "ls"
22 timing npm:load:setTitle Completed in 6ms
23 timing config:load:flatten Completed in 16ms
24 timing npm:load:display Completed in 21ms
25 verbose logfile logs-max:10 dir:/home/Holger/.npm/_logs/2023-08-22T12_26_18_961Z-
26 verbose logfile /home/Holger/.npm/_logs/2023-08-22T12_26_18_961Z-debug-0.log
27 timing npm:load:logFile Completed in 50ms
28 timing npm:load:timers Completed in 1ms
29 timing npm:load:configScope Completed in 0ms
30 timing npm:load Completed in 171ms
31 timing arborist:ctor Completed in 4ms
32 silly logfile done cleaning log files
33 timing command:ls Completed in 1010ms
34 verbose stack Error: missing: iobroker.admin@stable, required by iobroker.inst@3.0.0
34 verbose stack missing: iobroker.backitup@stable, required by iobroker.inst@3.0.0
34 verbose stack missing: iobroker.discovery@stable, required by iobroker.inst@3.0.0
34 verbose stack missing: iobroker.js-controller@stable, required by iobroker.inst@3.0.0
34 verbose stack     at LS.exec (/usr/lib/node_modules/npm/lib/commands/ls.js:202:9)
34 verbose stack     at async module.exports (/usr/lib/node_modules/npm/lib/cli.js:89:5)
35 verbose cwd /opt/iobroker
36 verbose Linux 6.1.21-v8+
37 verbose node v18.17.1
38 verbose npm  v9.6.7
39 error code ELSPROBLEMS
40 error missing: iobroker.admin@stable, required by iobroker.inst@3.0.0
40 error missing: iobroker.backitup@stable, required by iobroker.inst@3.0.0
40 error missing: iobroker.discovery@stable, required by iobroker.inst@3.0.0
40 error missing: iobroker.js-controller@stable, required by iobroker.inst@3.0.0
41 verbose exit 1
42 timing npm Completed in 1352ms
43 verbose code 1
44 error A complete log of this run can be found in: /home/Holger/.npm/_logs/2023-08-22T12_26_18_961Z-debug-0.log
~
~
~
~
~
"/home/Holger/.npm/_logs/2023-08-22T12_26_18_961Z-debug-0.log" 53 lines, 2732 bytes

Thomas Braun

@dooley_76

Der Server lässt dich nicht, warum auch immer.

ECONNREFUSED 2606:4700::6810:b22:443

Dooley_76

@thomas-braun

Ok, Danke für die Info. Noch eine Idee, was ich hier bei mir probieren könnte oder bin ich
jetzt erst einmal "lahmgelegt"?

Oder doch wieder ein Image nehmen und dann nicht auf die aktuellsten Versionen gehen? Wobei
das ja eigentlich genau der Grund war ...

Auf jeden Fall nochmal Danke für die Mühen

Thomas Braun

@dooley_76 sagte in Nach Systemaktualisierung Modbus Fehler 25:

Oder doch wieder ein Image nehmen und dann nicht auf die aktuellsten Versionen gehen? Wobei
das ja eigentlich genau der Grund war ...

Das nutzt dir natürlich bei 'Netzwerktrouble' nix.
Hast du irgendwas 'ungewöhnliches' da bei dir laufen?
pihole? Sonst irgendwas in der Richtung?

NEWS

Nach Systemaktualisierung Modbus Fehler 25

Support us

520
Online

31.7k
Users

79.7k
Topics

1.3m
Posts

NEWS

Nach Systemaktualisierung Modbus Fehler 25

Support us

520Online

31.7kUsers

79.7kTopics

1.3mPosts

520
Online

31.7k
Users

79.7k
Topics

1.3m
Posts