Node.js update
-
@thomas-braun said in Node.js update:
sudo apt install nodejs
ap@AP-Tiny:~$ sudo apt install nodejs Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: nodejs : Depends: libc6 (>= 2.28) but 2.27-3ubuntu1.6 is to be installed N: Ignoring file 'deconz.list.save.2' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension N: Ignoring file 'deconz.list.save.1' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension N: Ignoring file 'deconz.list.save.3' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension E: Unable to correct problems, you have held broken packages. ap@AP-Tiny:~$ -
@thomas-braun Do I need to downgrade node.js to 16?
-
No, you really really need to upgrade your operating system.
-
@thomas-braun I updated OS within current release 19.1 - did not help, waiting for instructions from Mint on how to update to newer release.
In the mean time, I installed node.js 16 and everything started to work, I was able to log in to system from web interface. I started updating ADMIN adapter and lost ability to log in via web browser again. Interestingly, the control script is working - I see responses to sensors, but I am not able to get into system via browser, Any ideas?
-
@ap2017 sagte in Node.js update:
I started updating ADMIN adapter and lost ability to log in via web browser again.
Run
iob diagagain so I can see where you are at now.
-
@thomas-braun said in Node.js update:
iob diag
*** ioBroker Diagnosis *** Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue ======== Start marking the full check here ========= Skript v.2023-04-16 *** BASE SYSTEM *** Architecture : x86_64 Docker : false Virtualization : none Distributor ID: LinuxMint Description: Linux Mint 19.1 Tessa Release: 19.1 Codename: tessa NAME="Linux Mint" VERSION="19.1 (Tessa)" ID=linuxmint ID_LIKE=ubuntu PRETTY_NAME="Linux Mint 19.1" VERSION_ID="19.1" HOME_URL="https://www.linuxmint.com/" SUPPORT_URL="https://forums.linuxmint.com/" BUG_REPORT_URL="http://linuxmint-troubleshooting-guide.readthedocs.io/en/latest/" PRIVACY_POLICY_URL="https://www.linuxmint.com/" VERSION_CODENAME=tessa UBUNTU_CODENAME=bionic Systemuptime and Load: 14:21:35 up 47 min, 2 users, load average: 0.07, 0.04, 0.05 CPU threads: 4 *** Time and Time Zones *** Local time: Wed 2023-06-14 14:21:36 EDT Universal time: Wed 2023-06-14 18:21:36 UTC RTC time: Wed 2023-06-14 18:21:36 Time zone: America/New_York (EDT, -0400) System clock synchronized: yes systemd-timesyncd.service active: yes RTC in local TZ: no *** User and Groups *** ap /home/ap ap adm dialout cdrom sudo dip plugdev lpadmin sambashare iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.9G 1.3G 478M 118M 2.1G 2.2G Swap: 2.1G 262K 2.1G Total: 6.0G 1.3G 2.6G 3768 M total memory 1253 M used memory 2134 M active memory 810 M inactive memory 467 M free memory 136 M buffer memory 1910 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 377M 1.3M 376M 1% /run /dev/sda1 ext4 220G 132G 77G 64% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup tmpfs tmpfs 377M 28K 377M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Jun 14 13:34:25 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [Wed Jun 14 13:34:27 2023] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Show mounted filesystems (real ones only): findmnt: unrecognized option '--real' Try 'findmnt --help' for more information. Files in neuralgic directories: /var: 4.2G /var/ 1.9G /var/lib 1.7G /var/log/journal/82929df7ee394b73b81252fe3b4e5020 1.7G /var/log/journal 1.7G /var/log Archived and active journals take up 1.6G in the file system. /opt/iobroker/backups: 24M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 56G /opt/iobroker/iobroker-data/ 55G /opt/iobroker/iobroker-data/history 429M /opt/iobroker/iobroker-data/files 125M /opt/iobroker/iobroker-data/history/20210321 125M /opt/iobroker/iobroker-data/history/20210320 The five largest files in iobroker-data are: 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.de9334af.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.e7d9968b.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.de9334af.js.map 20M /opt/iobroker/iobroker-data/objects.jsonl 20M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.becd2d7c.js.map *** NodeJS-Installation *** /usr/bin/nodejs v16.20.0 /usr/bin/node v16.20.0 /usr/bin/npm 8.19.4 /usr/bin/npx 8.19.4 nodejs: Installed: 16.20.0-deb-1nodesource1 Candidate: 16.20.0-deb-1nodesource1 Version table: *** 16.20.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bionic/main amd64 Packages 100 /var/lib/dpkg/status 8.10.0~dfsg-2ubuntu0.4 500 500 http://archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages 8.10.0~dfsg-2ubuntu0.2 500 500 http://security.ubuntu.com/ubuntu bionic-security/universe amd64 Packages 8.10.0~dfsg-2 500 500 http://archive.ubuntu.com/ubuntu bionic/universe amd64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 5.0.2 admin: 6.5.7 javascript: 7.0.8 Adapters from github: 0 Adapter State system.adapter.accuweather.0 : accuweather : AP-Tiny - disabled system.adapter.admin.0 : admin : AP-Tiny - disabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.backitup.0 : backitup : AP-Tiny - disabled system.adapter.cloud.0 : cloud : AP-Tiny - disabled system.adapter.deconz.0 : deconz : AP-Tiny - disabled, port: 8080 + system.adapter.discovery.0 : discovery : AP-Tiny - enabled system.adapter.echarts.0 : echarts : AP-Tiny - enabled system.adapter.flot.0 : flot : AP-Tiny - enabled + system.adapter.history.0 : history : AP-Tiny - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : AP-Tiny - enabled + system.adapter.info.0 : info : AP-Tiny - enabled + system.adapter.javascript.0 : javascript : AP-Tiny - enabled system.adapter.mysensors.0 : mysensors : AP-Tiny - disabled, port: 5003, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : AP-Tiny - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.socketio.0 : socketio : AP-Tiny - disabled, port: 8084, bind: 192.168.1.74, run as: admin system.adapter.sonoff.0 : sonoff : AP-Tiny - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : AP-Tiny - enabled, port: 8443, bind: 0.0.0.0 system.adapter.vis-google-fonts.0 : vis-google-fonts : AP-Tiny - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : AP-Tiny - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : AP-Tiny - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : AP-Tiny - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : AP-Tiny - enabled system.adapter.vis-material.0 : vis-material : AP-Tiny - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : AP-Tiny - enabled system.adapter.vis-metro.0 : vis-metro : AP-Tiny - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : AP-Tiny - enabled system.adapter.vis.0 : vis : AP-Tiny - enabled + system.adapter.web.0 : web : AP-Tiny - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : AP-Tiny - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ba5ba26a021aec119f4c76e5f01c6278-if00-port0 + system.adapter.zwave2.0 : zwave2 : AP-Tiny - enabled + instance is alive Enabled adapters with bindings + system.adapter.simple-api.0 : simple-api : AP-Tiny - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : AP-Tiny - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : AP-Tiny - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : AP-Tiny - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ba5ba26a021aec119f4c76e5f01c6278-if00-port0 ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Beta (latest) Installed ioBroker-Instances Used repository: Beta (latest) Adapter "accuweather" : 1.2.4 , installed 1.2.4 Adapter "admin" : 6.5.8 , installed 6.5.7 [Updatable] Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "deconz" : 1.3.21 , installed 1.3.21 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.5.1 , installed 1.4.15 [Updatable] Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "javascript" : 7.1.0 , installed 7.0.8 [Updatable] Controller "js-controller": 5.0.3 , installed 5.0.2 [Updatable] Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mysensors" : 3.0.0 , installed 3.0.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.3.5 , installed 6.3.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-material" : 0.1.3 , installed 0.1.3 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-material-webfont": 0.0.3, installed 0.0.3 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 5.5.3 , installed 5.5.3 Adapter "ws" : 2.3.6 , installed 2.3.6 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Adapter "zwave2" : 3.0.5 , installed 3.0.5 Objects and States Please stand by - This may take a while Objects: 3955 States: 3402 *** OS-Repositories and Updates *** Hit:1 http://archive.ubuntu.com/ubuntu bionic InRelease Hit:2 http://security.ubuntu.com/ubuntu bionic-security InRelease Hit:3 http://archive.ubuntu.com/ubuntu bionic-updates InRelease Ign:4 http://packages.linuxmint.com tessa InRelease Hit:5 http://archive.ubuntu.com/ubuntu bionic-backports InRelease Hit:6 https://deb.nodesource.com/node_16.x bionic InRelease Hit:7 http://packages.linuxmint.com tessa Release Hit:8 http://archive.canonical.com/ubuntu bionic InRelease Hit:9 http://phoscon.de/apt/deconz bionic InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 27152 807/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 27102 807/iobroker.js-con tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 101 22290 630/systemd-resolve tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 27647 816/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 23220 712/cupsd tcp6 0 0 :::8082 :::* LISTEN 1001 33556 1983/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 32769 816/sshd tcp6 0 0 :::8087 :::* LISTEN 1001 33684 2397/io.simple-api. tcp6 0 0 ::1:631 :::* LISTEN 0 23219 712/cupsd udp 0 0 0.0.0.0:5353 0.0.0.0:* 115 25966 695/avahi-daemon: r udp 0 0 127.0.0.53:53 0.0.0.0:* 101 22289 630/systemd-resolve udp 0 0 0.0.0.0:68 0.0.0.0:* 0 29500 1120/dhclient udp 0 0 0.0.0.0:32983 0.0.0.0:* 115 25968 695/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 23232 747/cups-browsed udp6 0 0 :::5353 :::* 115 25967 695/avahi-daemon: r udp6 0 0 :::58743 :::* 115 25969 695/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-06-14 14:20:54.236 - debug: zigbee.0 (1725) Received Zigbee message from '0x00124b0022419f47', type 'attributeReport', cluster 'genOnOff', data '{"onOff":0}' from endpoint 1 with groupID 0 2023-06-14 14:20:54.236 - debug: zigbee.0 (1725) Type attributeReport device {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":17,"_type":"Router","_ieeeAddr":"0x00124b0022419f47","_networkAddress":1904,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":9,"inputClusters":[0,3,4,5,6],"outputClusters":[0],"deviceNetworkAddress":1904,"deviceIeeeAddress":"0x00124b0022419f47","clusters":{"genBasic":{"attributes":{"modelId":"SA-003-Zigbee","manufacturerName":"eWeLink","powerSource":1,"zclVersion":1,"appVersion":3,"hwVersion":1,"dateCode":"20200702","swBuildId":"1.0.3"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da43bb","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Mains (single phase)","_modelID":"SA-003-Zigbee","_applicationVersion":3,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20200702","_softwareBuildID":"1.0.3","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":true,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1686766854235,"_defaultSendRequestWhen":"immediate","_linkquality":43},"mapped":{"exposes":[{"type":"switch","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"ON","value_off":"OFF","description":"On/off state of the switch","value_toggle":"TOGGLE"}]},{"type":"enum","name":"power_on_behavior","property":"power_on_behavior","access":7,"values":["off","on","toggle","previous"],"description":"Controls the behavior when the device is powered on after power loss"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"genOnOff","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state","on_time","off_wait_time"]},{"key":["power_on_behavior"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]}],"zigbeeModel":["SA-003-Zigbee"],"model":"SA-003-Zigbee","vendor":"eWeLink","description":"Zigbee smart plug","options":[]},"name":"0x00124b0022419f47"} incoming event: {"type":"attributeReport","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":17,"_type":"Router","_ieeeAddr":"0x00124b0022419f47","_networkAddress":1904,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":9,"inputClusters":[0,3,4,5,6],"outputClusters":[0],"deviceNetworkAddress":1904,"deviceIeeeAddress":"0x00124b0022419f47","clusters":{"genBasic":{"attributes":{"modelId":"SA-003-Zigbee","manufacturerName":"eWeLink","powerSource":1,"zclVersion":1,"appVersion":3,"hwVersion":1,"dateCode":"20200702","swBuildId":"1.0.3"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da43bb","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Mains (single phase)","_modelID":"SA-003-Zigbee","_applicationVersion":3,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20200702","_softwareBuildID":"1.0.3","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":true,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1686766854235,"_defaultSendRequestWhen":"immediate","_linkquality":43},"endpoint":"[Circular]","data":{"onOff":0},"linkquality":43,"groupID":0,"cluster":"genOnOff","meta":{"zclTransactionSequenceNumber":56,"manufacturerCode":null,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}}} 2023-06-14 14:20:54.237 - debug: zigbee.0 (1725) Received Zigbee message from '0x00124b0022419f47', type 'attributeReport', cluster 'genOnOff', data '{"onOff":0}' from endpoint 1 with groupID 0 2023-06-14 14:20:54.237 - debug: zigbee.0 (1725) Type attributeReport device {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":17,"_type":"Router","_ieeeAddr":"0x00124b0022419f47","_networkAddress":1904,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":9,"inputClusters":[0,3,4,5,6],"outputClusters":[0],"deviceNetworkAddress":1904,"deviceIeeeAddress":"0x00124b0022419f47","clusters":{"genBasic":{"attributes":{"modelId":"SA-003-Zigbee","manufacturerName":"eWeLink","powerSource":1,"zclVersion":1,"appVersion":3,"hwVersion":1,"dateCode":"20200702","swBuildId":"1.0.3"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da43bb","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Mains (single phase)","_modelID":"SA-003-Zigbee","_applicationVersion":3,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20200702","_softwareBuildID":"1.0.3","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":true,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1686766854235,"_defaultSendRequestWhen":"immediate","_linkquality":43},"mapped":{"exposes":[{"type":"switch","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"ON","value_off":"OFF","description":"On/off state of the switch","value_toggle":"TOGGLE"}]},{"type":"enum","name":"power_on_behavior","property":"power_on_behavior","access":7,"values":["off","on","toggle","previous"],"description":"Controls the behavior when the device is powered on after power loss"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"genOnOff","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state","on_time","off_wait_time"]},{"key":["power_on_behavior"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]}],"zigbeeModel":["SA-003-Zigbee"],"model":"SA-003-Zigbee","vendor":"eWeLink","description":"Zigbee smart plug","options":[]},"name":"0x00124b0022419f47"} incoming event: {"type":"attributeReport","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":17,"_type":"Router","_ieeeAddr":"0x00124b0022419f47","_networkAddress":1904,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":9,"inputClusters":[0,3,4,5,6],"outputClusters":[0],"deviceNetworkAddress":1904,"deviceIeeeAddress":"0x00124b0022419f47","clusters":{"genBasic":{"attributes":{"modelId":"SA-003-Zigbee","manufacturerName":"eWeLink","powerSource":1,"zclVersion":1,"appVersion":3,"hwVersion":1,"dateCode":"20200702","swBuildId":"1.0.3"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da43bb","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Mains (single phase)","_modelID":"SA-003-Zigbee","_applicationVersion":3,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20200702","_softwareBuildID":"1.0.3","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":true,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1686766854235,"_defaultSendRequestWhen":"immediate","_linkquality":43},"endpoint":"[Circular]","data":{"onOff":0},"linkquality":43,"groupID":0,"cluster":"genOnOff","meta":{"zclTransactionSequenceNumber":56,"manufacturerCode":null,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}}} 2023-06-14 14:20:54.262 - debug: zigbee.0 (1725) Publish {"state":"OFF"} to "00124b0022419f47" 2023-06-14 14:20:54.266 - debug: zigbee.0 (1725) handleMessage. {"type":"attributeReport","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":17,"_type":"Router","_ieeeAddr":"0x00124b0022419f47","_networkAddress":1904,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":9,"inputClusters":[0,3,4,5,6],"outputClusters":[0],"deviceNetworkAddress":1904,"deviceIeeeAddress":"0x00124b0022419f47","clusters":{"genBasic":{"attributes":{"modelId":"SA-003-Zigbee","manufacturerName":"eWeLink","powerSource":1,"zclVersion":1,"appVersion":3,"hwVersion":1,"dateCode":"20200702","swBuildId":"1.0.3"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da43bb","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Mains (single phase)","_modelID":"SA-003-Zigbee","_applicationVersion":3,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20200702","_softwareBuildID":"1.0.3","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":true,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1686766854266,"_defaultSendRequestWhen":"immediate","_linkquality":43},"endpoint":"[Circular]","data":{"onOff":0},"linkquality":43,"groupID":0,"cluster":"genOnOff","meta":{"zclTransactionSequenceNumber":56,"manufacturerCode":null,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}}} 2023-06-14 14:20:54.267 - debug: zigbee.0 (1725) handleMessage. {"type":"attributeReport","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":17,"_type":"Router","_ieeeAddr":"0x00124b0022419f47","_networkAddress":1904,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":9,"inputClusters":[0,3,4,5,6],"outputClusters":[0],"deviceNetworkAddress":1904,"deviceIeeeAddress":"0x00124b0022419f47","clusters":{"genBasic":{"attributes":{"modelId":"SA-003-Zigbee","manufacturerName":"eWeLink","powerSource":1,"zclVersion":1,"appVersion":3,"hwVersion":1,"dateCode":"20200702","swBuildId":"1.0.3"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da43bb","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Mains (single phase)","_modelID":"SA-003-Zigbee","_applicationVersion":3,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20200702","_softwareBuildID":"1.0.3","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":true,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1686766854267,"_defaultSendRequestWhen":"immediate","_linkquality":43},"endpoint":"[Circular]","data":{"onOff":0},"linkquality":43,"groupID":0,"cluster":"genOnOff","meta":{"zclTransactionSequenceNumber":56,"manufacturerCode":null,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}}} 2023-06-14 14:20:54.268 - debug: zigbee.0 (1725) Received Zigbee message from '0x00124b0022419f47', type 'attributeReport', cluster 'genOnOff', data '{"onOff":0}' from endpoint 1 with groupID 0 2023-06-14 14:20:54.268 - debug: zigbee.0 (1725) Type attributeReport device {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":17,"_type":"Router","_ieeeAddr":"0x00124b0022419f47","_networkAddress":1904,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":9,"inputClusters":[0,3,4,5,6],"outputClusters":[0],"deviceNetworkAddress":1904,"deviceIeeeAddress":"0x00124b0022419f47","clusters":{"genBasic":{"attributes":{"modelId":"SA-003-Zigbee","manufacturerName":"eWeLink","powerSource":1,"zclVersion":1,"appVersion":3,"hwVersion":1,"dateCode":"20200702","swBuildId":"1.0.3"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da43bb","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Mains (single phase)","_modelID":"SA-003-Zigbee","_applicationVersion":3,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20200702","_softwareBuildID":"1.0.3","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":true,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1686766854267,"_defaultSendRequestWhen":"immediate","_linkquality":43},"mapped":{"exposes":[{"type":"switch","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"ON","value_off":"OFF","description":"On/off state of the switch","value_toggle":"TOGGLE"}]},{"type":"enum","name":"power_on_behavior","property":"power_on_behavior","access":7,"values":["off","on","toggle","previous"],"description":"Controls the behavior when the device is powered on after power loss"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"genOnOff","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state","on_time","off_wait_time"]},{"key":["power_on_behavior"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]}],"zigbeeModel":["SA-003-Zigbee"],"model":"SA-003-Zigbee","vendor":"eWeLink","description":"Zigbee smart plug","options":[]},"name":"0x00124b0022419f47"} incoming event: {"type":"attributeReport","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":17,"_type":"Router","_ieeeAddr":"0x00124b0022419f47","_networkAddress":1904,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":9,"inputClusters":[0,3,4,5,6],"outputClusters":[0],"deviceNetworkAddress":1904,"deviceIeeeAddress":"0x00124b0022419f47","clusters":{"genBasic":{"attributes":{"modelId":"SA-003-Zigbee","manufacturerName":"eWeLink","powerSource":1,"zclVersion":1,"appVersion":3,"hwVersion":1,"dateCode":"20200702","swBuildId":"1.0.3"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da43bb","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Mains (single phase)","_modelID":"SA-003-Zigbee","_applicationVersion":3,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20200702","_softwareBuildID":"1.0.3","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":true,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1686766854267,"_defaultSendRequestWhen":"immediate","_linkquality":43},"endpoint":"[Circular]","data":{"onOff":0},"linkquality":43,"groupID":0,"cluster":"genOnOff","meta":{"zclTransactionSequenceNumber":56,"manufacturerCode":null,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}}} 2023-06-14 14:20:54.268 - debug: zigbee.0 (1725) Received Zigbee message from '0x00124b0022419f47', type 'attributeReport', cluster 'genOnOff', data '{"onOff":0}' from endpoint 1 with groupID 0 2023-06-14 14:20:54.269 - debug: zigbee.0 (1725) Type attributeReport device {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":17,"_type":"Router","_ieeeAddr":"0x00124b0022419f47","_networkAddress":1904,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":9,"inputClusters":[0,3,4,5,6],"outputClusters":[0],"deviceNetworkAddress":1904,"deviceIeeeAddress":"0x00124b0022419f47","clusters":{"genBasic":{"attributes":{"modelId":"SA-003-Zigbee","manufacturerName":"eWeLink","powerSource":1,"zclVersion":1,"appVersion":3,"hwVersion":1,"dateCode":"20200702","swBuildId":"1.0.3"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da43bb","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Mains (single phase)","_modelID":"SA-003-Zigbee","_applicationVersion":3,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20200702","_softwareBuildID":"1.0.3","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":true,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1686766854267,"_defaultSendRequestWhen":"immediate","_linkquality":43},"mapped":{"exposes":[{"type":"switch","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"ON","value_off":"OFF","description":"On/off state of the switch","value_toggle":"TOGGLE"}]},{"type":"enum","name":"power_on_behavior","property":"power_on_behavior","access":7,"values":["off","on","toggle","previous"],"description":"Controls the behavior when the device is powered on after power loss"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"genOnOff","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state","on_time","off_wait_time"]},{"key":["power_on_behavior"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]}],"zigbeeModel":["SA-003-Zigbee"],"model":"SA-003-Zigbee","vendor":"eWeLink","description":"Zigbee smart plug","options":[]},"name":"0x00124b0022419f47"} incoming event: {"type":"attributeReport","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":17,"_type":"Router","_ieeeAddr":"0x00124b0022419f47","_networkAddress":1904,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":9,"inputClusters":[0,3,4,5,6],"outputClusters":[0],"deviceNetworkAddress":1904,"deviceIeeeAddress":"0x00124b0022419f47","clusters":{"genBasic":{"attributes":{"modelId":"SA-003-Zigbee","manufacturerName":"eWeLink","powerSource":1,"zclVersion":1,"appVersion":3,"hwVersion":1,"dateCode":"20200702","swBuildId":"1.0.3"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da43bb","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Mains (single phase)","_modelID":"SA-003-Zigbee","_applicationVersion":3,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20200702","_softwareBuildID":"1.0.3","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":true,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1686766854267,"_defaultSendRequestWhen":"immediate","_linkquality":43},"endpoint":"[Circular]","data":{"onOff":0},"linkquality":43,"groupID":0,"cluster":"genOnOff","meta":{"zclTransactionSequenceNumber":56,"manufacturerCode":null,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}}} 2023-06-14 14:21:22.550 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0xa4c13895a0a783f8 TS0207 was last seen '5077.171' seconds ago. 2023-06-14 14:21:22.550 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0x00158d00044678ff lumi.sensor_switch.aq3 was last seen '3689232.264' seconds ago. 2023-06-14 14:21:22.552 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0x00124b0022658a2b WB01 was last seen '304.075' seconds ago. 2023-06-14 14:21:22.552 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0x00158d00045a362e lumi.sensor_wleak.aq1 was last seen '703.242' seconds ago. 2023-06-14 14:21:22.552 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0x04cf8cdf3c79009e lumi.sen_ill.mgl01 was last seen '177.775' seconds ago. 2023-06-14 14:21:22.554 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0x00158d0006ea578f lumi.sensor_wleak.aq1 was last seen '1047.042' seconds ago. 2023-06-14 14:21:22.554 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0x00158d0006e9796b lumi.sensor_wleak.aq1 was last seen '1620.726' seconds ago. 2023-06-14 14:21:22.554 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0x00158d0006e97800 lumi.sensor_wleak.aq1 was last seen '917.723' seconds ago. 2023-06-14 14:21:22.555 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0x00158d0006f93fb0 lumi.sensor_wleak.aq1 was last seen '561.83' seconds ago. 2023-06-14 14:21:22.556 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0xa4c138206a165e63 TS0207 was last seen '1379.288' seconds ago. 2023-06-14 14:21:22.556 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0xa4c13808caa1c4e6 TS0207 was last seen '4434.999' seconds ago. 2023-06-14 14:21:22.556 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0xa4c138375c1e064d TS0207 was last seen '2260.278' seconds ago. 2023-06-14 14:21:22.557 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0xa4c13855ba4e66b6 TS0207 was last seen '8996.791' seconds ago. 2023-06-14 14:21:22.557 - debug: zigbee.0 (1725) DeviceAvailability:Non-pingable device 0xa4c1388acbf249aa TS0011 was last seen '14447731.067' seconds ago.============ Mark until here for C&P =============
iob diag has finished.
-
@thomas-braun I guess I need to execute admin adapter right?
-
iob start admin -
@ap2017 sagte in Node.js update:
@thomas-braun I guess I need to execute admin adapter right?
yes,
iob start adminbut you will encounter a lot of more or less severe problens, because you have installed beta versions of several adapters and the brand new bleeding edge js-controller
-
@homoran said in Node.js update:
iob start admin
Thank you, I am back in business (till the next time)...
-
@ap2017 sagte in Node.js update:
@homoran said in Node.js update:
iob start admin
Thank you, I am back in business (till the next time)...
please read my edit!
-
Now check how to upgrade your operating system to the current release.
'Tessa' is out of any support.
19.1 'Tessa' (LTS) Security Support Ended 2 months and 2 weeks ago (01 Apr 2023)And run your iob on 'stable' not beta-stage.
-
@thomas-braun Here is what I received from Mint support:
Linux Mint 19.1 has reached end of life 2 months ago, so it's good to upgrade it. SO you'll keep getting security updates again for your software. The newest version of node.js on Linux Mint is 12 but you can add the NodeSource PPA on Linux Mint 20.x or 21.x to get node.js 18 (or newer). The instructions are here: https://github.com/nodesource/distribut ... /README.md. Use the Ubuntu instructions. So on Linux Mint 20.x or 21.x you would run this to add node.js 18.x: CODE: SELECT ALL curl -fsSL https://deb.nodesource.com/setup_18.x | sudo -E bash - &&\ sudo apt-get install -y nodejs To upgrade from Linux Mint 19.1 to 20.x or 21.x you can follow the instructions here: viewtopic.php?t=235992. First upgrade to 19.3, then to 20 and if you want upgrade further to 20.3 and then 21. You can see till when each release is supported here: https://linuxmint.com/download_all.php. It will be some work to upgrade, and especially going from 19.3 to 20 is a hassle. Upgrading between major releases is easier and more reliable from 20 to 21. Still, because you're 2 major releases behind it may be recommended to instead do a fresh install of Linux Mint 21.x.I am wondering if it will be better to switch to different Linux version like Ubuntu. How difficult is to port ioBroker to new Linux installation?
-
@ap2017 sagte in Node.js update:
How difficult is to port ioBroker to new Linux installation?
Easy. Backup your current installation, change your OS to a current distribution (I recommend Debian 12 'Bookworm' for running a server), install a plain ioBroker and install your backup. Very easy with the Backitup-Adapter.
-
@ap2017 sagte in Node.js update:
How difficult is to port ioBroker to new Linux installation?
diffi...what?
backup with backitup
install new OS
install iobroker and the latest recommended node with one line
install vis if you use it, because of an actual bug
restore the backup
drink a cup of coffee or what you prefer
ready -
@thomas-braun Sounds doable. Just to be safe I will do it on differed solid state drive in my controller.
My system recovered but I see two issues:
- Not able to start VIS, getting message
File edit.html not found: {}- When updating adapters getting error 25. Tried to follow https://forum.iobroker.net/topic/57337/fehler-25-217-oder-enotempty-bei-adapter-install-update/2 still having error 25
Here is additional info:
ap@AP-Tiny:/opt/iobroker$ iobroker list instances system.adapter.accuweather.0 : accuweather : AP-Tiny - disabled + system.adapter.admin.0 : admin : AP-Tiny - enabled, port: 8081, bind: 0.0.0.0, run as: admi n system.adapter.backitup.0 : backitup : AP-Tiny - disabled system.adapter.cloud.0 : cloud : AP-Tiny - disabled system.adapter.deconz.0 : deconz : AP-Tiny - disabled, port: 8080 + system.adapter.discovery.0 : discovery : AP-Tiny - enabled system.adapter.echarts.0 : echarts : AP-Tiny - enabled system.adapter.flot.0 : flot : AP-Tiny - enabled + system.adapter.history.0 : history : AP-Tiny - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : AP-Tiny - enabled + system.adapter.info.0 : info : AP-Tiny - enabled + system.adapter.javascript.0 : javascript : AP-Tiny - enabled system.adapter.mysensors.0 : mysensors : AP-Tiny - disabled, port: 5003, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : AP-Tiny - enabled, port: 8087, bind: 0.0.0.0, run as: admi n + system.adapter.socketio.0 : socketio : AP-Tiny - enabled, port: 8084, bind: 192.168.1.74, run as: admin system.adapter.sonoff.0 : sonoff : AP-Tiny - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : AP-Tiny - enabled, port: 8443, bind: 0.0.0.0 system.adapter.vis-google-fonts.0 : vis-google-fonts : AP-Tiny - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : AP-Tiny - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : AP-Tiny - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : AP-Tiny - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : AP-Tiny - enabled system.adapter.vis-material.0 : vis-material : AP-Tiny - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : AP-Tiny - enabled system.adapter.vis-metro.0 : vis-metro : AP-Tiny - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : AP-Tiny - enabled system.adapter.vis.0 : vis : AP-Tiny - enabled + system.adapter.web.0 : web : AP-Tiny - enabled, port: 8082, bind: 0.0.0.0, run as: admi n + system.adapter.zigbee.0 : zigbee : AP-Tiny - enabled, port: /dev/serial/by-id/usb-ITead_Sonof f_Zigbee_3.0_USB_Dongle_Plus_ba5ba26a021aec119f4c76e5f01c6278-if00-port0 + system.adapter.zwave2.0 : zwave2 : AP-Tiny - enabled + instance is alive -
i stall vis if you use it, because of an actual bug
You have to install vis prior to restoring your backup. Known issue.
- Error 25 ist very generic, it can have a lot of causes for this error.
Try
iob stop iob fix iob start -
- Assuming that I have to delete VIS adapter and add it back. Will all my screens stay in the system?
- Tried this, did not help.
iob stop iob fix iob startHere is detailed error message
$ ./iobroker upgrade echarts Update echarts from @1.4.15 to @1.5.1 NPM version: 8.19.4 Installing iobroker.echarts@1.5.1... (System call) ERROR: npm ERR! code 6npm ERR! path /opt/iobroker/node_modules/iobroker.visnpm ERR! command failednpm ERR! command sh -c -- node main.js --installnpm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2023-06-14T20_57_44_562Z-debug-0.log ERROR: host.AP-Tiny Cannot install iobroker.echarts@1.5.1: 6 ERROR: process exited with code 25 -
@ap2017
Do it via command line interface and debug option:iobroker upgrade echarts --debug -
ap@AP-Tiny:/opt/iobroker$ iobroker upgrade echarts --debug This upgrade of "echarts" will introduce the following changes: ========================================================================== -> 1.5.1: Error handling in JSON data was improved -> 1.5.0: Implemented raw data export ========================================================================== Would you like to upgrade echarts from @1.4.15 to @1.5.1 now? [(y)es, (n)o]: y Update echarts from @1.4.15 to @1.5.1 NPM version: 8.19.4 Installing iobroker.echarts@1.5.1... (System call) npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not transfer it over to other users. You may safely remove the package from your dependencies. npm WARN deprecated har-validator@5.1.5: this library is no longer supported npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142 npm WARN deprecated json3@3.3.2: Please use the native JSON object instead of JSON 3 npm WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained. npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797) npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797) npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797) npm WARN deprecated uuid@3.4.0: Please upgrade to version 7 or higher. Older versions may use Math.random() in certain circumstances, which is known to be problematic. See https://v8.dev/blog/math-random for details. npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142 npm ERR! code 6 npm ERR! path /opt/iobroker/node_modules/iobroker.vis npm ERR! command failed npm ERR! command sh -c -- node main.js --install npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2023-06-14T21_31_07_618Z-debug-0.log npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not transfer it over to other users. You may safely remove the package from your dependencies. npm WARN deprecated har-validator@5.1.5: this library is no longer supported npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142 npm WARN deprecated json3@3.3.2: Please use the native JSON object instead of JSON 3 npm WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained. npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797) npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797) npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797) npm WARN deprecated uuid@3.4.0: Please upgrade to version 7 or higher. Older versions may use Math.random() in certain circumstances, which is known to be problematic. See https://v8.dev/blog/math-random for details. npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142 npm ERR! code 6 npm ERR! path /opt/iobroker/node_modules/iobroker.vis npm ERR! command failed npm ERR! command sh -c -- node main.js --install npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2023-06-14T21_31_07_618Z-debug-0.log host.AP-Tiny Cannot install iobroker.echarts@1.5.1: 6 ap@AP-Tiny:/opt/iobroker$open Request’s Past, Present and Future #3142
closed ReDos Vulnerability Regression Visibility Notice #797
closed ReDos Vulnerability Regression Visibility Notice #797
closed ReDos Vulnerability Regression Visibility Notice #797
open Request’s Past, Present and Future #3142
open Request’s Past, Present and Future #3142
closed ReDos Vulnerability Regression Visibility Notice #797
closed ReDos Vulnerability Regression Visibility Notice #797
closed ReDos Vulnerability Regression Visibility Notice #797
open Request’s Past, Present and Future #3142
