Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[Der-Jeti]

MoinMoin

ich nutze den ESPHome Adapter in 0.6.2.

Wenn ich jetzt den Helligkeitswert in iobroker von 0 auf zb 120 ändere ist er direkt wieder 0.

Wenn ich im esphome Gerät selber der Wert ändere zeigt iobroker den Wert richtig an.
Kann ihn nur nicht ändern.

Weiss jemand wie ich das begaben kann?

Grüße

light:

platform: monochromatic
output: pwm_output
name: Flur Licht
id: flur licht default_transition_length: 3s

[arteck]

@der-jeti bissel mau dein Script

[Der-Jeti]

@arteck

Habe ich wohl vergessen.

Fehlt noch was?

output:
platform: esp8266_pwm
pin: GPI013
frequency: 100Hz
id: pwm_output

[arteck]

@der-jeti sagte in ESPHome Adapter brightness setzen geht nicht:

Fehlt noch was?

das gesammte Script

[Der-Jeti]

substitutions:
  name: esphome-haus
  friendly_name: ESPHome-Haus

esphome:
  name: ${name}
  friendly_name: ${friendly_name}
  name_add_mac_suffix: false

esp8266:
  board: esp01_1m

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: !secret api_key

# Allow Over-The-Air updates
ota:
  - platform: esphome
    password: !secret ota_password
  
# Allow provisioning Wi-Fi via serial
improv_serial:

wifi:
  # Set up a wifi access point
   ssid: !secret wifi_ssid
   password: !secret wifi_password

   ap:
     ssid: $name Fallback
     password: !secret ap_password

# Example configuration entry
web_server:
  port: 80

captive_portal:

#______________________________________________

one_wire:
 - id: bus_one
   platform: gpio
   pin:
    number: GPIO4
    mode:
      input: true
   #   pullup: true

#______________________________________________

sensor:
  - platform: dallas_temp
    address: 0x1b000004568d9428
    name: "Temperature #3-Keller"
    unit_of_measurement: "°C"
    icon: "mdi:thermometer-plus"
    device_class: "temperature"
    state_class: "measurement"
    accuracy_decimals: 2
    update_interval: 60s

  - platform: dallas_temp
    address: 0x83000004569c7428
    name: "Temperature #2-Flur-u"
    unit_of_measurement: "°C"
    icon: "mdi:thermometer-plus"
    device_class: "temperature"
    state_class: "measurement"
    accuracy_decimals: 2
    update_interval: 60s

  - platform: dallas_temp
    address: 0x1e00000456e94e28
    name: "Temperature #1-Kuche"
    unit_of_measurement: "°C"
    icon: "mdi:thermometer-plus"
    device_class: "temperature"
    state_class: "measurement"
    accuracy_decimals: 2
    update_interval: 60s

binary_sensor:
  - platform: gpio
    pin: GPIO5
    name: PIR Sensor Flur
    device_class: motion
    filters:
      - delayed_off: 10ms
    on_press:
      - light.turn_on: flur_licht
    on_release: 
      - light.turn_off: flur_licht

#______________________________________________

output:
  - platform: esp8266_pwm
    pin: GPIO13
    frequency: 100Hz
    id: pwm_output
    #min_power: 0.5
    #max_power: 0.75

#______________________________________________

light:
  - platform: monochromatic
    output: pwm_output
    name: Flur Licht
    id: flur_licht
    default_transition_length: 3s
 
#______________________________________________