Performance Probleme durch Shelly Adapter?

Schtallone

@schtallone said in Performance Probleme durch Shelly Adapter?:

@dp20eic said in Performance Probleme durch Shelly Adapter?:

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

top - 11:38:51 up 22:30, 0 users, load average: 3,95, 4,01, 4,15

Moin,

kannst Du mal Docker stoppen und schauen, ob der load avarage auf ein normales maß fällt?
Kannst Du Dich auf die QNAP auch per ssh einloggen, dann kannst Du da auch TOP nutzen.

VG
Bernd

Mittel SSH (Putty) und top

Vor dem Stop der Container-Station:

Mem: 4056084K used, 3923148K free, 399060K shrd, 462308K buff, 898664K cached
CPU:  0.0% usr 50.0% sys  0.0% nic 50.0% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 4.20 4.25 4.16 6/1289 29424
  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
    1     0 admin    S     7756  0.1   0  0.0 init
    2     0 admin    SW       0  0.0   0  0.0 [kthreadd]
    3     2 admin    IW<      0  0.0   0  0.0 [rcu_gp]
    4     2 admin    IW<      0  0.0   0  0.0 [rcu_par_gp]
    8     2 admin    IWN      0  0.0   0  0.0 [mm_percpu_wq]
    9     2 admin    SW       0  0.0   0  0.0 [ksoftirqd/0]
   10     2 admin    IW       0  0.0   0  0.0 [rcu_sched]
   11     2 admin    SW       0  0.0   0  0.0 [migration/0]
   13     2 admin    SWN      0  0.0   0  0.0 [cpuhp/0]
   14     2 admin    SWN      0  0.0   1  0.0 [cpuhp/1]
   15     2 admin    SW       0  0.0   1  0.0 [migration/1]
   16     2 admin    SW       0  0.0   1  0.0 [ksoftirqd/1]
   19     2 admin    SW       0  0.0   0  0.0 [kdevtmpfs]
   20     2 admin    IW<      0  0.0   1  0.0 [netns]
   25     2 admin    SW       0  0.0   0  0.0 [kauditd]
  586     2 admin    SW       0  0.0   1  0.0 [khungtaskd]
  587     2 admin    SW       0  0.0   0  0.0 [oom_reaper]
  588     2 admin    IW<      0  0.0   1  0.0 [writeback]
  590     2 admin    SW       0  0.0   0  0.0 [kcompactd0]
  591     2 admin    SWN      0  0.0   0  0.0 [ksmd]
  605     2 admin    IW<      0  0.0   0  0.0 [cryptd]
  632     2 admin    IW<      0  0.0   1  0.0 [kintegrityd]
  633     2 admin    IW<      0  0.0   0  0.0 [kblockd]
  634     2 admin    IW<      0  0.0   1  0.0 [blkcg_punt_bio]
  760     1 admin    S     165m  2.1   0  0.0 python /usr/local/network/nmd/nmd.pyc
  775     1 admin    S    23040  0.2   1  0.0 {qmmsd} python /usr/local/network/nmd/nmd.pyc
  853     2 admin    IW<      0  0.0   0  0.0 [tifm]
  860     2 admin    IW<      0  0.0   1  0.0 [ata_sff]
  880     2 admin    IW<      0  0.0   0  0.0 [md]
  899     2 admin    SW       0  0.0   0  0.0 [watchdogd]
  955     1 admin    S     147m  1.8   1  0.0 ./Plex Media Server
  998     2 admin    IW<      0  0.0   0  0.0 [rpciod]
  999     2 admin    IW<      0  0.0   0  0.0 [kworker/u9:0-i9]
 1000     2 admin    IW<      0  0.0   0  0.0 [xprtiod]
 1037     2 admin    SW       0  0.0   1  0.0 [kswapd0]
 1038     2 admin    SW       0  0.0   0  0.0 [ecryptfs-kthrea]
 1041     2 admin    IW<      0  0.0   1  0.0 [nfsiod]
 1042     2 admin    IW<      0  0.0   0  0.0 [cifsiod]
 1043     2 admin    IW<      0  0.0   0  0.0 [smb3decryptd]
 1044     2 admin    IW<      0  0.0   0  0.0 [cifsfileinfoput]
 1045     2 admin    IW<      0  0.0   0  0.0 [cifsoplockd]
 1050     2 admin    IW<      0  0.0   0  0.0 [kthrotld]
 1114     2 admin    SW       0  0.0   1  0.0 [card0-crtc0]
 1115     2 admin    SW       0  0.0   0  0.0 [card0-crtc1]
 1116     2 admin    SW       0  0.0   0  0.0 [card0-crtc2]
 1127   955 admin    S N  64540  0.8   0  0.0 {Plex Script Hos} Plex Plug-in [com.plexapp.system] /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.py --server-version 1.31.0.6654-02189b09f /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/System.bundle
 1725     2 admin    IW<      0  0.0   0  0.0 [kmpath_rdacd]
 1732     2 admin    IW<      0  0.0   0  0.0 [nvme-wq]
 1734     2 admin    IW<      0  0.0   0  0.0 [nvme-reset-wq]
 1736     2 admin    IW<      0  0.0   0  0.0 [nvme-delete-wq]
 1747     2 admin    SW       0  0.0   1  0.0 [scsi_eh_0]
 1748     2 admin    IW<      0  0.0   0  0.0 [scsi_tmf_0]
 1752     2 admin    SW       0  0.0   0  0.0 [scsi_eh_1]
 1753     2 admin    IW<      0  0.0   0  0.0 [scsi_tmf_1]
 1796     2 admin    SW       0  0.0   0  0.0 [rc0]
 1801     2 admin    IW<      0  0.0   1  0.0 [raid5wq]
 1803     2 admin    IW<      0  0.0   0  0.0 [dm-block-clone]
 1805     2 admin    IW<      0  0.0   1  0.0 [dm_bufio_cache]
 1806     2 admin    IW<      0  0.0   0  0.0 [kmpathd]
 1807     2 admin    IW<      0  0.0   0  0.0 [kmpath_handlerd]
 1813     2 admin    IW<      0  0.0   1  0.0 [sdhci]
 1814     2 admin    SW       0  0.0   0  0.0 [irq/39-mmc0]
 1871     2 admin    IW<      0  0.0   1  0.0 [zswap-shrink]
 1873     2 admin    IW<      0  0.0   1  0.0 [mmc_complete]
 1997     2 admin    IW<      0  0.0   1  0.0 [uas]
 2200     1 admin    S     698m  8.9   0  0.0 container-station/supervisord -c /share/CACHEDEV1_DATA/.qpkg/container-station/etc/supervisord.conf -d
 2274  2200 admin    S    38792  0.4   0  0.0 container-station/redis-server *:0
 2289     2 admin    IW<      0  0.0   0  0.0 [kcopyd]
 2290     2 admin    IW<      0  0.0   1  0.0 [kcopyd_tracked]
 2302     2 admin    IW<      0  0.0   0  0.0 [drbd-reissue]
 2466     1 admin    S    15124  0.1   1  0.0 udevd --daemon
 2843  2200 admin    S    1385m 17.7   0  0.0 container-station/dockerd -H unix:///var/run/system-docker.sock --bridge=docker0 --storage-driver=overlay2 --dns 10.0.5.1 --data-root=/var/lib/system-docker --exec-root=/var/run/system-docker --pidfile=/var/run/system-docker.pid -D --userland-proxy=false --config-file /share/CACHEDEV1_DATA/.qpkg/container-station/etc/system-docker.json
 2873  2843 admin    S    1302m 16.6   1  0.0 container-station/containerd --config /var/run/system-docker/containerd/containerd.toml --log-level debug
 2887  2200 admin    S    4362m 55.8   1  0.0 /share/CACHEDEV1_DATA/.qpkg/container-station/etc/../bin/container-station
 3052  2200 admin    S    1911m 24.4   0  0.0 container-station/dockerd -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --bridge=lxcbr0 --tlsverify --tlscacert=/etc/docker/tls/ca.pem --tlscert=/etc/docker/tls/server.pem --tlskey=/etc/docker/tls/server-key.pem --storage-driver=overlay2 --dns 10.0.3.1 --data-root=/var/lib/docker --exec-root=/var/run/docker --pidfile=/var/run/docker.pid -D --userland-proxy=false --config-
 3100  2200 admin    S    1499m 19.1   1  0.0 container-station/lxd
 3101  3052 admin    S    1375m 17.5   1  0.0 container-station/containerd --config /var/run/docker/containerd/containerd.toml --log-level debug
 3215     2 admin    SW       0  0.0   0  0.0 [md9_raid1]
 3228     2 admin    SW       0  0.0   0  0.0 [jbd2/md9-8]
 3229     2 admin    IW<      0  0.0   1  0.0 [ext4-rsv-conver]
 3237   955 admin    S    41212  0.5   1  0.0 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600
 3239     2 admin    SW       0  0.0   1  0.0 [md13_raid1]

NAch Stop der Container-Station

Mem: 4409348K used, 3569884K free, 399108K shrd, 1484984K buff, 545384K cached
CPU: 20.0% usr 19.2% sys  1.2% nic 59.3% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 2.14 3.08 3.78 9/1123 11343
  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
 5479     2 admin    RW       0  0.0   1  5.0 [notify thread]
 3441     1 admin    S    1326m 16.9   0  2.6 /sbin/hal_daemon -f
32076     2 admin    IW       0  0.0   0  1.4 [kworker/0:0-kac]
 8632     2 admin    IW       0  0.0   1  1.1 [kworker/1:5-fno]
31533     2 admin    IW       0  0.0   1  0.8 [kworker/1:0-eve]
15037     2 admin    DW       0  0.0   0  0.6 [kworker/0:75+pm]
15069     2 admin    IW       0  0.0   0  0.4 [kworker/0:95-ka]
13304     1 admin    S     424m  5.4   1  0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/tutk/bin/tutk_agent -d 4
10394     1 admin    S     222m  2.8   0  0.2 /mnt/ext/opt/Python/bin/python2 /sbin/wsd.py
 7597     1 admin    S    41708  0.5   0  0.2 /mnt/ext/opt/netmgr/util/redis/redis-server *:0
 6268 18618 admin    S <  2189m 28.0   0  0.1 /usr/local/apache/bin/apache_proxy -k start -f /etc/apache-sys-proxy.conf
14488     1 admin    S    1397m 17.8   1  0.1 {cc3-fastcgi} python /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3/python/bin/cc3-fastcgi -w /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3 start
12222 11744 admin    S     882m 11.2   1  0.1 /usr/local/mariadb/bin/mysqld --defaults-file=/usr/local/mariadb/my-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.system/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.system/tmp --log-error=/share/CACHEDEV1_DATA/.system/data/QNAP-TS251D.err --pid-file
 7559     1 admin    S     559m  7.1   0  0.1 /mnt/ext/opt/Python/bin/python ./manage.pyc runfcgi method=threaded socket=/tmp/netmgr.sock pidfile=/tmp/netmgr.pid errlog=/tmp/nvs-django-e.log outlog=/tmp/nvs-django-o.log
16003     1 admin    S     382m  4.9   0  0.1 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app qufirewall-monitor start
 4487     1 admin    S     239m  3.0   1  0.1 /sbin/lvmetad
 8545  8463 admin    S     222m  2.8   0  0.1 {gwd} python /usr/local/network/nmd/nmd.pyc
 8493  8463 admin    S     219m  2.8   0  0.1 {ncaas} python /usr/local/network/nmd/nmd.pyc
10072 22367 admin    S     176m  2.2   0  0.1 my_qmonitor -pid:22367 -client:mymediadbserver -reg:/share/CACHEDEV1_DATA/Bilder/Bilder Unsortiert/ -filter:0x400 -root_event -dbdir:/share/CACHEDEV1_DATA/.system/qmonitor/dbdir
32102     1 admin    S     114m  1.4   0  0.1 /usr/local/bin/qsyncsrv_monitor -pid:32091 -reg:/share/CACHEDEV1_DATA/.team_folder -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b
21706 20140 admin    S    88172  1.1   0  0.1 sshd: admin@pts/1
22664     1 admin    S    84952  1.0   0  0.1 /sbin/rfsd -i -f /etc/rfsd.conf
11426     1 admin    S    74752  0.9   1  0.1 /sbin/vdd_control -d
 3237   955 admin    S    41212  0.5   0  0.1 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600
29203     1 admin    S    20692  0.2   1  0.1 {qdesk_soldier} /bin/sh /sbin/qdesk_soldier
10947 24645 admin    R    16180  0.2   1  0.1 top
21295 21014 admin    S    2463m 31.5   1  0.0 /share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/bin/mariadbd --defaults-file=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/my.cnf --basedir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10 --datadir=/share/CACHEDEV1_DATA/.system/data.m10 --plugin-dir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/lib/plugin --user=admin --tmpdir=/share/CACHEDEV1_DATA/.sys
17255 16150 httpdusr S    2180m 27.8   1  0.0 /usr/local/apache/bin/apache -k start -c PidFile /var/lock/apache.pid -f /etc/config/apache/apache.conf
 6809 20178 admin    S    1360m 17.4   0  0.0 /usr/local/apache/bin/apache_proxys -k start -f /etc/apache-sys-proxy-ssl.conf
14539 14537 admin    S    1212m 15.5   1  0.0 /usr/local/sbin/ncd
13710     1 admin    S    1196m 15.3   1  0.0 /usr/local/sbin/qulogdb --defaults-file=/mnt/ext/opt/QuLog/etc/qulog-mariadb.conf
26954 26952 admin    S    1051m 13.4   0  0.0 /usr/bin/qDmcd
31913 31423 admin    S     865m 11.0   1  0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qbox-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qbox/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qbox/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qbox/mysql/data/QNAP-TS251D.err --pid-file
26094 25688 admin    S     857m 10.9   1  0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qcoolie-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qcoolie/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qcoolie/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qcoolie/mysql/data/QNAP-TS251D.er
29133     1 admin    S N   830m 10.6   0  0.0 /usr/local/medialibrary/bin/myidbserver -d
22367     1 admin    S     766m  9.8   0  0.0 /usr/local/medialibrary/bin/mymediadbserver -t -d -i -1
10610     1 admin    S     704m  9.0   0  0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080
10603     1 admin    S     704m  9.0   1  0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080
22489     1 admin    S     549m  7.0   1  0.0 /sbin/upnpd br0 br0
14499     1 admin    S     507m  6.5   0  0.0 /usr/local/sbin/ncdb --defaults-file=/mnt/ext/opt/NotificationCenter/etc/nc-mariadb.conf
 9830     1 admin    S     440m  5.6   0  0.0 /mnt/ext/opt/Python/bin/python /mnt/ext/opt/netmgr/api service ip_monitor start
19033 19030 admin    S     431m  5.5   1  0.0 /usr/local/medialibrary/bin/mytranscodesvr -debug -db /share/CACHEDEV1_DATA/
17787     1 admin    S     401m  5.1   1  0.0 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app api start
28520 17710 Peter Pa S     383m  4.9   0  0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
 7232     1 admin    S     360m  4.6   1  0.0 {php-fpm-proxy} php-fpm: master process (/etc/php-fpm-sys-proxy.conf)
 7236  7232 admin    S     360m  4.6   0  0.0 {php-fpm-proxy} php-fpm: pool www
 7237  7232 admin    S     360m  4.6   1  0.0 {php-fpm-proxy} php-fpm: pool www
16091     1 admin    S     360m  4.6   0  0.0 {php-fpm-qweb} php-fpm: master process (/etc/config/apache/php-fpm-qweb.conf)
16092 16091 httpdusr S     360m  4.6   1  0.0 {php-fpm-qweb} php-fpm: pool www
16093 16091 httpdusr S     360m  4.6   1  0.0 {php-fpm-qweb} php-fpm: pool www
 7158     1 admin    S     359m  4.6   1  0.0 {qumagie-php-fpm} php-fpm: master process (/share/CACHEDEV1_DATA/.qpkg/qumagie/v2.1.2/php-fpm-qumagie.conf)
17720 17710 admin    S     355m  4.5   1  0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
17710     1 admin    S     350m  4.4   0  0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
17718 17710 admin    S     349m  4.4   1  0.0 {cleanupd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
17717 17710 admin    S     349m  4.4   1  0.0 {smbd-notifyd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf
13801 13794 admin    S     341m  4.3   0  0.0 /usr/local/sbin/qulogd
26414     1 admin    S     336m  4.3   0  0.0 /usr/local/sbin/pp_qcoolied -f /etc/config/pp_qcoolie/qcoolie.conf
28267     1 admin    S     336m  4.3   0  0.0 tunnelagent
26936 26934 admin    S     325m  4.1   1  0.0 /usr/local/medialibrary/bin/myupnpmediasvr
17648 17621 admin    S <   316m  4.0   1  0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf
 5756     1 admin    S     312m  4.0   0  0.0 /sbin/cs_qdaemon
17621     1 admin    S <   308m  3.9   1  0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf
17719 17621 admin    S <   308m  3.9   0  0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf
32137     1 admin    S     306m  3.9   1  0.0 /usr/local/bin/qsyncsrv_monitor -pid:32132 -reg:/share/homes -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b
19516     1 admin    S     302m  3.8   1  0.0 /sbin/multipathd
 8494  8463 admin    S     293m  3.7   1  0.0 {qserviced} python /usr/local/network/nmd/nmd.pyc
32046     1 admin    S     280m  3.5   1  0.0 /sbin/qsyncsrv_dbm -b
17751     1 admin    S     252m  3.2   1  0.0 /usr/local/samba/sbin/nmbd -l /var/log -D -s /etc/config/smb.conf
22937     1 admin    S     237m  3.0   1  0.0 /usr/sbin/rsyslogd -f /etc/rsyslog_only_klog.conf -c4 -M /usr/local/lib/rsyslog/
23781     1 admin    S     227m  2.9   0  0.0 /sbin/qShield
22703     1 admin    S     226m  2.9   0  0.0 /usr/local/bin/rfsd_qmonitor -f:/tmp/rfsd_qmonitor.conf
 8547  8463 admin    S     219m  2.8   0  0.0 {ressd} python /usr/local/network/nmd/nmd.pyc
23772     1 admin    S     219m  2.8   1  0.0 qLogEngined: Write log is enabled...
19499     1 admin    S     211m  2.7   0  0.0 /usr/local/medialibrary/bin/myconvertserver -d
 6264  6082 admin    S <   207m  2.6   1  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6578  6576 admin    S     207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6084  6082 admin    S <   207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6759  6082 admin    S <   207m  2.6   1  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6803  6576 admin    S     207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 6962  6082 admin    S <   207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 7060  6576 admin    S     207m  2.6   1  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi
 7220  6576 admin    S     207m  2.6   0  0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi

inzwischen habe ich den iob ja auch wieder laufen und teste einzelene Adapter bzgl. Performance-Verhalten. Alle Container aus: siehe Post oben

Ich kann die Übung aber nochmals machen...

Homoran

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Alle Container aus: siehe Post oben

link bitte!

das wird hier schnell unübersichtlich

DJMarc75

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

siehe Post oben

Du erwartest aber nicht von Helfenden dass man "siehe Post oben" alle Beiträge durchsucht ? Du machst es Dir echt einfach !

Homoran

ok, hab's (hoffentlich)

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Load average: 2.14 3.08 3.78 9/1123 11343

noch immer zu hoch.
wie lange war die Container station aus?

Marc Berg

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Mittel SSH (Putty) und top

Ich glaube mittlerweile, dass es kein CPU Problem, sondern ein Problem mit den/der Festplatte(n) ist. Das klang ja auch in einigen Kommentaren schon an.

Ist auf QNAP "iotop" installiert, welches du über das Terminal starten kannst?

Homoran

@marc-berg sagte in Performance Probleme durch Shelly Adapter?:

sondern ein Problem mit den/der Festplatte(n) ist

würde zum hohen I/O passen

Marc Berg

@homoran sagte in Performance Probleme durch Shelly Adapter?:

würde zum hohen I/O passen

genau, das ist der Gedanke dahinter. Bzw. der hohe Load.

Schtallone

@homoran

https://forum.iobroker.net/post/1044989

dies hier

Schtallone

@marc-berg said in Performance Probleme durch Shelly Adapter?:

iotop

nein noch nicht. Installiere es gerade. Mit welchen parameter soll ich die messung machen in SSH? Oder auf der Oberfläche?

Schtallone

@djmarc75
ne, ich habe nur eine Erwartung. Einen freundlichen unterton...

Schtallone

@schtallone said in Performance Probleme durch Shelly Adapter?:

@marc-berg said in Performance Probleme durch Shelly Adapter?:

iotop

nein noch nicht. Installiere es gerade. Mit welchen parameter soll ich die messung machen in SSH? Oder auf der Oberfläche?

Total DISK READ:    0.00 B/s | Total DISK WRITE:   20.48 K/s
  TID  PRIO     USER      DISK READ   DISK WRITE  SWAPIN      IO> COMMAND                                                                                                                                                                                                                                                                                                                                                                  
17547   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  8.98 %  /usr/sbin/rsyslogd -f /etc/rsyslog_only_klog.conf -c4 -M /usr/local/lib/rsyslog/
 3228  be/3  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  1.70 %  [jbd2/md9-]
    3   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [rcu_g]
    4   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [rcu_par_g]
    8   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [mm_percpu_w]
    9   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [ksoftirqd/]
   10   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [rcu_sche]
   11   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [migration/]
   13   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [cpuhp/]
   14   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [cpuhp/]
   15   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [migration/]
   16   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [ksoftirqd/]
   19   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kdevtmpf]
   20   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [netn]
   25   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kaudit]
  586   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [khungtask]
  587   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [oom_reape]
  588   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [writebac]
  590   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kcompactd]
  591   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [ksm]
  605   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [crypt]
  632   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kintegrity]
  633   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kblock]
  634   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [blkcg_punt_bi]
  760   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  python /usr/local/network/nmd/nmd.pyc
  775   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  python /usr/local/network/nmd/nmd.pyc
  780   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  python /usr/local/network/nmd/nmd.pyc
  853   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [tif]
  860   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [ata_sf]
  880   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [m]
  899   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [watchdog]
  955   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1021   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1062   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1064   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1076   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1077   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1087   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1113   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1118   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1126   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3222   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3226   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3227   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3230   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3236   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3243   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3304   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
11285   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 5500   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 5502   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
  996   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  sshd: admin@pts/1
  998   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [rpcio]
 1000   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [xprtio]
 1037   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kswapd]
 1038   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [ecryptfs-kthre]
 1041   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [nfsio]
 1042   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [cifsio]
 1043   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [smb3decrypt]
 1044   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [cifsfileinfopu]
 1045   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [cifsoplock]
 1050   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kthrotl]
 1114   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [card0-crtc]
 1115   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [card0-crtc]
 1116   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [card0-crtc]
 1127   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  Plex Plug-in [com.plexapp.system] /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.py --server-version 1.31.0.6654-02189b09f /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/System.bundle
 1702   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  Plex Plug-in [com.plexapp.system] /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.py --server-version 1.31.0.6654-02189b09f /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/System.bundle

Die App öffnet selber ein Terminal und zeigt dan dies...

Marc Berg

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Die App öffnet selber ein Terminal und zeigt dan dies...

Drücke mal die "a" Taste, dann müssten die akkumulierten Werte angezeigt werden. Sieht aber auf den ersten Blick unspektakulär aus.

Homoran

@marc-berg sagte in Performance Probleme durch Shelly Adapter?:

Sieht aber auf den ersten Blick unspektakulär aus.

ausser das syslog rotiert (sonst noch mehr)

Marc Berg

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Die App öffnet selber ein Terminal und zeigt dan dies...

Das habe ich nicht so ganz verstanden. Hast du iotop nicht über SSH gestartet?

Schtallone

@marc-berg ne, kann ich aber machen
moment

Schtallone


[~] # iotop
Total DISK READ:    0.00 B/s | Total DISK WRITE:   16.38 K/s
  TID  PRIO     USER      DISK READ   DISK WRITE  SWAPIN      IO> COMMAND
    1   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  init
    2   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kthread]
    3   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [rcu_g]
    4   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [rcu_par_g]
    8   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [mm_percpu_w]
    9   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [ksoftirqd/]
   10   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [rcu_sche]
   11   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [migration/]
   13   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [cpuhp/]
   14   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [cpuhp/]
   15   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [migration/]
   16   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [ksoftirqd/]
   19   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kdevtmpf]
   20   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [netn]
   25   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kaudit]
  441   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  sshd: admin@pts/3
  586   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [khungtask]
  587   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [oom_reape]
  588   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [writebac]
  590   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kcompactd]
  591   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [ksm]
  605   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [crypt]
  632   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kintegrity]
  633   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [kblock]
  634   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [blkcg_punt_bi]
  760   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  python /usr/local/network/nmd/nmd.pyc
  775   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  python /usr/local/network/nmd/nmd.pyc
  780   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  python /usr/local/network/nmd/nmd.pyc
  817   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  -sh
  853   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [tif]
  860   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [ata_sf]
  880   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [m]
  899   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  [watchdog]
  955   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1021   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1062   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1064   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1076   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1077   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1087   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1113   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1118   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 1126   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3222   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3226   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3227   -/0  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3230   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server
 3236   -/4  UNKNOWN       0.00 B/s     0.00 B/s  0.00 %  0.00 %  ./Plex Media Server

? Offline

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

955 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server

Moin,

ich dachte da läuft keine Videostation, Plex ist aber eine!

VG
Bernd

Schtallone

@dp20eic sorry, ich dachte Kamera-Survialance Apps. Soll ich Plex einmal deaktivieren?

Marc Berg

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

[~] # iotop

           Total DISK READ:    0.00 B/s | Total DISK WRITE:   16.38 K/s
           
             TID  PRIO     USER      DISK READ   DISK WRITE  SWAPIN      IO> >COMMAND

Hatte die Hoffnung, dass hier was zu sehen ist. Aber leider nicht. Nach 200 Posts ohne Lösung würde ich wahrscheinlich an deiner Stelle ~~den Schrott in die Tonne treten~~ alles komplett neu aufsetzen.

? Offline

@schtallone sagte in Performance Probleme durch Shelly Adapter?:

Soll ich Plex einmal deaktivieren?

Moin,

wie ist denn die aktuelle Situation? Schaden kann es ja nicht.
Ich hatte vorhin auch mal SMB gesehen, greift da auch ein Win PC auf das NAS zu? Oder wird da irgendwas Synchronisiert, so als Backup eines Win PC auf das NAS?
Ich fische da jetzt auch nur noch im trüben Wasser, vielleicht hast Du auch Hitzeprobleme, bekomme auch keine neuen Ideen. Vielleicht noch mal in einem QNAP Forum auf die Suche, nach erhöhter load Avarrage, gehen.

VG
Bernd

Community Forum

NEWS

Performance Probleme durch Shelly Adapter?

Support us

752

32.4k

81.5k

1.3m