NEWS
RFXCOM Adapter lässt sich nicht installieren
-
@forum-merlin sagte in RFXCOM Adapter lässt sich nicht installieren:
root@vm-iobroker
Als root führst du da gar nichts aus.
Installier das Paket 'nodejs' nochmal neu drüber.
@thomas-braun
Naja, wer so verzweifelt über stunden rumfuchtelt macht viele komische Dinge! :-)
Und noch viel krasser, ich hab sogar was machen müssen was ich garnicht kapiere...root@vm-iobroker:/opt/iobroker# npm install -g node-gyp npm notice npm notice New minor version of npm available! 9.5.1 -> 9.8.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v9.8.0 npm notice Run npm install -g npm@9.8.0 to update! npm notice npm ERR! code EACCES npm ERR! syscall mkdir npm ERR! path /usr/lib/node_modules/node-gyp npm ERR! errno -13 npm ERR! Error: EACCES: permission denied, mkdir '/usr/lib/node_modules/node-gyp' npm ERR! [Error: EACCES: permission denied, mkdir '/usr/lib/node_modules/node-gyp'] { npm ERR! errno: -13, npm ERR! code: 'EACCES', npm ERR! syscall: 'mkdir', npm ERR! path: '/usr/lib/node_modules/node-gyp' npm ERR! } npm ERR! npm ERR! The operation was rejected by your operating system. npm ERR! It is likely you do not have the permissions to access this file as the current user npm ERR! npm ERR! If you believe this might be a permissions issue, please double-check the npm ERR! permissions of the file and its containing directories, or try running npm ERR! the command again as root/Administrator. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2023-07-19T14_57_49_852Z-debug-0.log root@vm-iobroker:/opt/iobroker# npm install -g node-gyp^C root@vm-iobroker:/opt/iobroker# npm install -g npm@9.8.0 npm ERR! code EACCES npm ERR! syscall rename npm ERR! path /usr/lib/node_modules/npm npm ERR! dest /usr/lib/node_modules/.npm-qUIFSsiV npm ERR! errno -13 npm ERR! Error: EACCES: permission denied, rename '/usr/lib/node_modules/npm' -> '/usr/lib/node_modules/.npm-qUIFSsiV' npm ERR! [Error: EACCES: permission denied, rename '/usr/lib/node_modules/npm' -> '/usr/lib/node_modules/.npm-qUIFSsiV'] { npm ERR! errno: -13, npm ERR! code: 'EACCES', npm ERR! syscall: 'rename', npm ERR! path: '/usr/lib/node_modules/npm', npm ERR! dest: '/usr/lib/node_modules/.npm-qUIFSsiV' npm ERR! } npm ERR! npm ERR! The operation was rejected by your operating system. npm ERR! It is likely you do not have the permissions to access this file as the current user npm ERR! npm ERR! If you believe this might be a permissions issue, please double-check the npm ERR! permissions of the file and its containing directories, or try running npm ERR! the command again as root/Administrator. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2023-07-19T14_58_31_016Z-debug-0.log root@vm-iobroker:das ging dann nur mit sudo unter root ???
root@vm-iobroker:/opt/iobroker# sudo npm install -g npm@9.8.0 removed 17 packages, and changed 67 packages in 3s 28 packages are looking for funding run `npm fund` for details root@vm-iobroker:Ich bin ja nicht sooo der Linux Guru, aber wie kann der super-user root noch mehr als super-user werden?
Egaaal....
Hier eben nochmal die drüber-installation von "nodejs"
iobroker@vm-iobroker:/opt/iobroker$ sudo apt install nodejs Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig nodejs ist schon die neueste Version (18.16.1-deb-1nodesource1). 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. iobroker@vm-iobroker:/opt/iobroker$ sudo apt install nodejsdann
iob stop iob fix iob startund natürlich nochmal
iobroker@vm-iobroker:/opt/iobroker$ iobroker add rfxcom auto --debug NPM version: 9.8.0 Installing iobroker.rfxcom@2.0.2... (System call) npm ERR! code 1 npm ERR! path /opt/iobroker/node_modules/@serialport/bindings npm ERR! command failed npm ERR! command sh -c prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild npm ERR! prebuild-install warn install No prebuilt binaries found (target=18.16.1 runtime=node arch=x64 libc= platform=linux) npm ERR! gyp info it worked if it ends with ok npm ERR! gyp info using node-gyp@7.1.2 npm ERR! gyp info using node@18.16.1 | linux | x64 npm ERR! gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3" npm ERR! (node:5888) [DEP0150] DeprecationWarning: Setting process.config is deprecated. In the future the property will be read-only. npm ERR! (Use `node --trace-deprecation ...` to show where the warning was created) npm ERR! gyp info spawn /usr/bin/python3 npm ERR! gyp info spawn args [ npm ERR! gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py', npm ERR! gyp info spawn args 'binding.gyp', npm ERR! gyp info spawn args '-f', npm ERR! gyp info spawn args 'make', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/opt/iobroker/node_modules/@serialport/bindings/build/config.gypi', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/home/iobroker/.cache/node-gyp/18.16.1/include/node/common.gypi', npm ERR! gyp info spawn args '-Dlibrary=shared_library', npm ERR! gyp info spawn args '-Dvisibility=default', npm ERR! gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/18.16.1', npm ERR! gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp', npm ERR! gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/18.16.1/<(target_arch)/node.lib', npm ERR! gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/@serialport/bindings', npm ERR! gyp info spawn args '-Dnode_engine=v8', npm ERR! gyp info spawn args '--depth=.', npm ERR! gyp info spawn args '--no-parallel', npm ERR! gyp info spawn args '--generator-output', npm ERR! gyp info spawn args 'build', npm ERR! gyp info spawn args '-Goutput_dir=.' npm ERR! gyp info spawn args ] npm ERR! Traceback (most recent call last): npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 51, in <module> npm ERR! sys.exit(gyp.script_main()) npm ERR! ^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 670, in script_main npm ERR! return main(sys.argv[1:]) npm ERR! ^^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 662, in main npm ERR! return gyp_main(args) npm ERR! ^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 629, in gyp_main npm ERR! [generator, flat_list, targets, data] = Load( npm ERR! ^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 150, in Load npm ERR! result = gyp.input.Load( npm ERR! ^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 3021, in Load npm ERR! LoadTargetBuildFile( npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 411, in LoadTargetBuildFile npm ERR! build_file_data = LoadOneBuildFile( npm ERR! ^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 239, in LoadOneBuildFile npm ERR! build_file_contents = open(build_file_path, "rU").read() npm ERR! ^^^^^^^^^^^^^^^^^^^^^^^^^^^ npm ERR! ValueError: invalid mode: 'rU' while trying to load binding.gyp npm ERR! gyp ERR! configure error npm ERR! gyp ERR! stack Error: `gyp` failed with exit code: 1 npm ERR! gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:351:16) npm ERR! gyp ERR! stack at ChildProcess.emit (node:events:513:28) npm ERR! gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:291:12) npm ERR! gyp ERR! System Linux 6.1.0-10-amd64 npm ERR! gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild" npm ERR! gyp ERR! cwd /opt/iobroker/node_modules/@serialport/bindings npm ERR! gyp ERR! node -v v18.16.1 npm ERR! gyp ERR! node-gyp -v v7.1.2 npm ERR! gyp ERR! not ok npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-07-19T16_14_11_491Z-debug-0.log npm ERR! code 1 npm ERR! path /opt/iobroker/node_modules/@serialport/bindings npm ERR! command failed npm ERR! command sh -c prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild npm ERR! prebuild-install warn install No prebuilt binaries found (target=18.16.1 runtime=node arch=x64 libc= platform=linux) npm ERR! gyp info it worked if it ends with ok npm ERR! gyp info using node-gyp@7.1.2 npm ERR! gyp info using node@18.16.1 | linux | x64 npm ERR! gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3" npm ERR! (node:5888) [DEP0150] DeprecationWarning: Setting process.config is deprecated. In the future the property will be read-only. npm ERR! (Use `node --trace-deprecation ...` to show where the warning was created) npm ERR! gyp info spawn /usr/bin/python3 npm ERR! gyp info spawn args [ npm ERR! gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py', npm ERR! gyp info spawn args 'binding.gyp', npm ERR! gyp info spawn args '-f', npm ERR! gyp info spawn args 'make', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/opt/iobroker/node_modules/@serialport/bindings/build/config.gypi', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/home/iobroker/.cache/node-gyp/18.16.1/include/node/common.gypi', npm ERR! gyp info spawn args '-Dlibrary=shared_library', npm ERR! gyp info spawn args '-Dvisibility=default', npm ERR! gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/18.16.1', npm ERR! gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp', npm ERR! gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/18.16.1/<(target_arch)/node.lib', npm ERR! gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/@serialport/bindings', npm ERR! gyp info spawn args '-Dnode_engine=v8', npm ERR! gyp info spawn args '--depth=.', npm ERR! gyp info spawn args '--no-parallel', npm ERR! gyp info spawn args '--generator-output', npm ERR! gyp info spawn args 'build', npm ERR! gyp info spawn args '-Goutput_dir=.' npm ERR! gyp info spawn args ] npm ERR! Traceback (most recent call last): npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 51, in <module> npm ERR! sys.exit(gyp.script_main()) npm ERR! ^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 670, in script_main npm ERR! return main(sys.argv[1:]) npm ERR! ^^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 662, in main npm ERR! return gyp_main(args) npm ERR! ^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 629, in gyp_main npm ERR! [generator, flat_list, targets, data] = Load( npm ERR! ^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 150, in Load npm ERR! result = gyp.input.Load( npm ERR! ^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 3021, in Load npm ERR! LoadTargetBuildFile( npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 411, in LoadTargetBuildFile npm ERR! build_file_data = LoadOneBuildFile( npm ERR! ^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 239, in LoadOneBuildFile npm ERR! build_file_contents = open(build_file_path, "rU").read() npm ERR! ^^^^^^^^^^^^^^^^^^^^^^^^^^^ npm ERR! ValueError: invalid mode: 'rU' while trying to load binding.gyp npm ERR! gyp ERR! configure error npm ERR! gyp ERR! stack Error: `gyp` failed with exit code: 1 npm ERR! gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:351:16) npm ERR! gyp ERR! stack at ChildProcess.emit (node:events:513:28) npm ERR! gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:291:12) npm ERR! gyp ERR! System Linux 6.1.0-10-amd64 npm ERR! gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild" npm ERR! gyp ERR! cwd /opt/iobroker/node_modules/@serialport/bindings npm ERR! gyp ERR! node -v v18.16.1 npm ERR! gyp ERR! node-gyp -v v7.1.2 npm ERR! gyp ERR! not ok npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-07-19T16_14_11_491Z-debug-0.log host.vm-iobroker Cannot install iobroker.rfxcom@2.0.2: 1 iobroker@vm-iobroker:/opt/iobroker$ -
@thomas-braun
Naja, wer so verzweifelt über stunden rumfuchtelt macht viele komische Dinge! :-)
Und noch viel krasser, ich hab sogar was machen müssen was ich garnicht kapiere...root@vm-iobroker:/opt/iobroker# npm install -g node-gyp npm notice npm notice New minor version of npm available! 9.5.1 -> 9.8.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v9.8.0 npm notice Run npm install -g npm@9.8.0 to update! npm notice npm ERR! code EACCES npm ERR! syscall mkdir npm ERR! path /usr/lib/node_modules/node-gyp npm ERR! errno -13 npm ERR! Error: EACCES: permission denied, mkdir '/usr/lib/node_modules/node-gyp' npm ERR! [Error: EACCES: permission denied, mkdir '/usr/lib/node_modules/node-gyp'] { npm ERR! errno: -13, npm ERR! code: 'EACCES', npm ERR! syscall: 'mkdir', npm ERR! path: '/usr/lib/node_modules/node-gyp' npm ERR! } npm ERR! npm ERR! The operation was rejected by your operating system. npm ERR! It is likely you do not have the permissions to access this file as the current user npm ERR! npm ERR! If you believe this might be a permissions issue, please double-check the npm ERR! permissions of the file and its containing directories, or try running npm ERR! the command again as root/Administrator. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2023-07-19T14_57_49_852Z-debug-0.log root@vm-iobroker:/opt/iobroker# npm install -g node-gyp^C root@vm-iobroker:/opt/iobroker# npm install -g npm@9.8.0 npm ERR! code EACCES npm ERR! syscall rename npm ERR! path /usr/lib/node_modules/npm npm ERR! dest /usr/lib/node_modules/.npm-qUIFSsiV npm ERR! errno -13 npm ERR! Error: EACCES: permission denied, rename '/usr/lib/node_modules/npm' -> '/usr/lib/node_modules/.npm-qUIFSsiV' npm ERR! [Error: EACCES: permission denied, rename '/usr/lib/node_modules/npm' -> '/usr/lib/node_modules/.npm-qUIFSsiV'] { npm ERR! errno: -13, npm ERR! code: 'EACCES', npm ERR! syscall: 'rename', npm ERR! path: '/usr/lib/node_modules/npm', npm ERR! dest: '/usr/lib/node_modules/.npm-qUIFSsiV' npm ERR! } npm ERR! npm ERR! The operation was rejected by your operating system. npm ERR! It is likely you do not have the permissions to access this file as the current user npm ERR! npm ERR! If you believe this might be a permissions issue, please double-check the npm ERR! permissions of the file and its containing directories, or try running npm ERR! the command again as root/Administrator. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2023-07-19T14_58_31_016Z-debug-0.log root@vm-iobroker:das ging dann nur mit sudo unter root ???
root@vm-iobroker:/opt/iobroker# sudo npm install -g npm@9.8.0 removed 17 packages, and changed 67 packages in 3s 28 packages are looking for funding run `npm fund` for details root@vm-iobroker:Ich bin ja nicht sooo der Linux Guru, aber wie kann der super-user root noch mehr als super-user werden?
Egaaal....
Hier eben nochmal die drüber-installation von "nodejs"
iobroker@vm-iobroker:/opt/iobroker$ sudo apt install nodejs Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig nodejs ist schon die neueste Version (18.16.1-deb-1nodesource1). 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. iobroker@vm-iobroker:/opt/iobroker$ sudo apt install nodejsdann
iob stop iob fix iob startund natürlich nochmal
iobroker@vm-iobroker:/opt/iobroker$ iobroker add rfxcom auto --debug NPM version: 9.8.0 Installing iobroker.rfxcom@2.0.2... (System call) npm ERR! code 1 npm ERR! path /opt/iobroker/node_modules/@serialport/bindings npm ERR! command failed npm ERR! command sh -c prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild npm ERR! prebuild-install warn install No prebuilt binaries found (target=18.16.1 runtime=node arch=x64 libc= platform=linux) npm ERR! gyp info it worked if it ends with ok npm ERR! gyp info using node-gyp@7.1.2 npm ERR! gyp info using node@18.16.1 | linux | x64 npm ERR! gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3" npm ERR! (node:5888) [DEP0150] DeprecationWarning: Setting process.config is deprecated. In the future the property will be read-only. npm ERR! (Use `node --trace-deprecation ...` to show where the warning was created) npm ERR! gyp info spawn /usr/bin/python3 npm ERR! gyp info spawn args [ npm ERR! gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py', npm ERR! gyp info spawn args 'binding.gyp', npm ERR! gyp info spawn args '-f', npm ERR! gyp info spawn args 'make', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/opt/iobroker/node_modules/@serialport/bindings/build/config.gypi', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/home/iobroker/.cache/node-gyp/18.16.1/include/node/common.gypi', npm ERR! gyp info spawn args '-Dlibrary=shared_library', npm ERR! gyp info spawn args '-Dvisibility=default', npm ERR! gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/18.16.1', npm ERR! gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp', npm ERR! gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/18.16.1/<(target_arch)/node.lib', npm ERR! gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/@serialport/bindings', npm ERR! gyp info spawn args '-Dnode_engine=v8', npm ERR! gyp info spawn args '--depth=.', npm ERR! gyp info spawn args '--no-parallel', npm ERR! gyp info spawn args '--generator-output', npm ERR! gyp info spawn args 'build', npm ERR! gyp info spawn args '-Goutput_dir=.' npm ERR! gyp info spawn args ] npm ERR! Traceback (most recent call last): npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 51, in <module> npm ERR! sys.exit(gyp.script_main()) npm ERR! ^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 670, in script_main npm ERR! return main(sys.argv[1:]) npm ERR! ^^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 662, in main npm ERR! return gyp_main(args) npm ERR! ^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 629, in gyp_main npm ERR! [generator, flat_list, targets, data] = Load( npm ERR! ^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 150, in Load npm ERR! result = gyp.input.Load( npm ERR! ^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 3021, in Load npm ERR! LoadTargetBuildFile( npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 411, in LoadTargetBuildFile npm ERR! build_file_data = LoadOneBuildFile( npm ERR! ^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 239, in LoadOneBuildFile npm ERR! build_file_contents = open(build_file_path, "rU").read() npm ERR! ^^^^^^^^^^^^^^^^^^^^^^^^^^^ npm ERR! ValueError: invalid mode: 'rU' while trying to load binding.gyp npm ERR! gyp ERR! configure error npm ERR! gyp ERR! stack Error: `gyp` failed with exit code: 1 npm ERR! gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:351:16) npm ERR! gyp ERR! stack at ChildProcess.emit (node:events:513:28) npm ERR! gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:291:12) npm ERR! gyp ERR! System Linux 6.1.0-10-amd64 npm ERR! gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild" npm ERR! gyp ERR! cwd /opt/iobroker/node_modules/@serialport/bindings npm ERR! gyp ERR! node -v v18.16.1 npm ERR! gyp ERR! node-gyp -v v7.1.2 npm ERR! gyp ERR! not ok npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-07-19T16_14_11_491Z-debug-0.log npm ERR! code 1 npm ERR! path /opt/iobroker/node_modules/@serialport/bindings npm ERR! command failed npm ERR! command sh -c prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild npm ERR! prebuild-install warn install No prebuilt binaries found (target=18.16.1 runtime=node arch=x64 libc= platform=linux) npm ERR! gyp info it worked if it ends with ok npm ERR! gyp info using node-gyp@7.1.2 npm ERR! gyp info using node@18.16.1 | linux | x64 npm ERR! gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3" npm ERR! (node:5888) [DEP0150] DeprecationWarning: Setting process.config is deprecated. In the future the property will be read-only. npm ERR! (Use `node --trace-deprecation ...` to show where the warning was created) npm ERR! gyp info spawn /usr/bin/python3 npm ERR! gyp info spawn args [ npm ERR! gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py', npm ERR! gyp info spawn args 'binding.gyp', npm ERR! gyp info spawn args '-f', npm ERR! gyp info spawn args 'make', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/opt/iobroker/node_modules/@serialport/bindings/build/config.gypi', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi', npm ERR! gyp info spawn args '-I', npm ERR! gyp info spawn args '/home/iobroker/.cache/node-gyp/18.16.1/include/node/common.gypi', npm ERR! gyp info spawn args '-Dlibrary=shared_library', npm ERR! gyp info spawn args '-Dvisibility=default', npm ERR! gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/18.16.1', npm ERR! gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp', npm ERR! gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/18.16.1/<(target_arch)/node.lib', npm ERR! gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/@serialport/bindings', npm ERR! gyp info spawn args '-Dnode_engine=v8', npm ERR! gyp info spawn args '--depth=.', npm ERR! gyp info spawn args '--no-parallel', npm ERR! gyp info spawn args '--generator-output', npm ERR! gyp info spawn args 'build', npm ERR! gyp info spawn args '-Goutput_dir=.' npm ERR! gyp info spawn args ] npm ERR! Traceback (most recent call last): npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 51, in <module> npm ERR! sys.exit(gyp.script_main()) npm ERR! ^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 670, in script_main npm ERR! return main(sys.argv[1:]) npm ERR! ^^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 662, in main npm ERR! return gyp_main(args) npm ERR! ^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 629, in gyp_main npm ERR! [generator, flat_list, targets, data] = Load( npm ERR! ^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 150, in Load npm ERR! result = gyp.input.Load( npm ERR! ^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 3021, in Load npm ERR! LoadTargetBuildFile( npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 411, in LoadTargetBuildFile npm ERR! build_file_data = LoadOneBuildFile( npm ERR! ^^^^^^^^^^^^^^^^^ npm ERR! File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 239, in LoadOneBuildFile npm ERR! build_file_contents = open(build_file_path, "rU").read() npm ERR! ^^^^^^^^^^^^^^^^^^^^^^^^^^^ npm ERR! ValueError: invalid mode: 'rU' while trying to load binding.gyp npm ERR! gyp ERR! configure error npm ERR! gyp ERR! stack Error: `gyp` failed with exit code: 1 npm ERR! gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:351:16) npm ERR! gyp ERR! stack at ChildProcess.emit (node:events:513:28) npm ERR! gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:291:12) npm ERR! gyp ERR! System Linux 6.1.0-10-amd64 npm ERR! gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild" npm ERR! gyp ERR! cwd /opt/iobroker/node_modules/@serialport/bindings npm ERR! gyp ERR! node -v v18.16.1 npm ERR! gyp ERR! node-gyp -v v7.1.2 npm ERR! gyp ERR! not ok npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-07-19T16_14_11_491Z-debug-0.log host.vm-iobroker Cannot install iobroker.rfxcom@2.0.2: 1 iobroker@vm-iobroker:/opt/iobroker$@forum-merlin sagte in RFXCOM Adapter lässt sich nicht installieren:
Ich bin ja nicht sooo der Linux Guru, aber wie kann der super-user root noch mehr als super-user werden?
Egaaal....Mannnnn.... LASST DIE SCHEISSE MIT DEM ROOT!!!!!!!!!11111
root shell ist verboten!!!
-
@forum-merlin sagte in RFXCOM Adapter lässt sich nicht installieren:
Ich bin ja nicht sooo der Linux Guru, aber wie kann der super-user root noch mehr als super-user werden?
Egaaal....Mannnnn.... LASST DIE SCHEISSE MIT DEM ROOT!!!!!!!!!11111
root shell ist verboten!!!
@thomas-braun
is ja guuuut... Beruhig dich. -
@thomas-braun
is ja guuuut... Beruhig dich.sudo apt update sudo apt install --reinstall nodejs iob diagAls USER, NICHT! als root!
-
@thomas-braun
is ja guuuut... Beruhig dich.nodejs repariert?
Gibt es die Datei
/usr/lib/python3.11/EXTERNALLY-MANAGED
auf dem System?Grundsätzlich baut der adapter nämlich:
echad@chet:/opt/iobroker $ iob add rfxcom NPM version: 9.6.7 Installing iobroker.rfxcom@2.0.2... (System call) added 53 packages in 41s 118 packages are looking for funding run `npm fund` for details host.chet install adapter rfxcom upload [2] rfxcom.admin /opt/iobroker/node_modules/iobroker.rfxcom/admin/index.html index.html text/html upload [1] rfxcom.admin /opt/iobroker/node_modules/iobroker.rfxcom/admin/rfxcom.png rfxcom.png image/png upload [0] rfxcom.admin /opt/iobroker/node_modules/iobroker.rfxcom/admin/words.js words.js application/javascript host.chet object system.adapter.rfxcom created/updated host.chet create instance rfxcom host.chet object system.adapter.rfxcom.0.alive created host.chet object system.adapter.rfxcom.0.connected created host.chet object system.adapter.rfxcom.0.compactMode created host.chet object system.adapter.rfxcom.0.cpu created host.chet object system.adapter.rfxcom.0.cputime created host.chet object system.adapter.rfxcom.0.memHeapUsed created host.chet object system.adapter.rfxcom.0.memHeapTotal created host.chet object system.adapter.rfxcom.0.memRss created host.chet object system.adapter.rfxcom.0.uptime created host.chet object system.adapter.rfxcom.0.inputCount created host.chet object system.adapter.rfxcom.0.outputCount created host.chet object system.adapter.rfxcom.0.eventLoopLag created host.chet object system.adapter.rfxcom.0.sigKill created host.chet object system.adapter.rfxcom.0.logLevel created host.chet object rfxcom.0.info created host.chet object rfxcom.0.info.connection created host.chet object rfxcom.0.inclusionOn created host.chet object rfxcom.0.rawData created host.chet object rfxcom.0.firmwareVersion created host.chet object rfxcom.0.availableVersion created host.chet Set default value of rfxcom.0.info.connection: false host.chet object system.adapter.rfxcom.0 created echad@chet:/opt/iobroker $ -
nodejs repariert?
Gibt es die Datei
/usr/lib/python3.11/EXTERNALLY-MANAGED
auf dem System?Grundsätzlich baut der adapter nämlich:
echad@chet:/opt/iobroker $ iob add rfxcom NPM version: 9.6.7 Installing iobroker.rfxcom@2.0.2... (System call) added 53 packages in 41s 118 packages are looking for funding run `npm fund` for details host.chet install adapter rfxcom upload [2] rfxcom.admin /opt/iobroker/node_modules/iobroker.rfxcom/admin/index.html index.html text/html upload [1] rfxcom.admin /opt/iobroker/node_modules/iobroker.rfxcom/admin/rfxcom.png rfxcom.png image/png upload [0] rfxcom.admin /opt/iobroker/node_modules/iobroker.rfxcom/admin/words.js words.js application/javascript host.chet object system.adapter.rfxcom created/updated host.chet create instance rfxcom host.chet object system.adapter.rfxcom.0.alive created host.chet object system.adapter.rfxcom.0.connected created host.chet object system.adapter.rfxcom.0.compactMode created host.chet object system.adapter.rfxcom.0.cpu created host.chet object system.adapter.rfxcom.0.cputime created host.chet object system.adapter.rfxcom.0.memHeapUsed created host.chet object system.adapter.rfxcom.0.memHeapTotal created host.chet object system.adapter.rfxcom.0.memRss created host.chet object system.adapter.rfxcom.0.uptime created host.chet object system.adapter.rfxcom.0.inputCount created host.chet object system.adapter.rfxcom.0.outputCount created host.chet object system.adapter.rfxcom.0.eventLoopLag created host.chet object system.adapter.rfxcom.0.sigKill created host.chet object system.adapter.rfxcom.0.logLevel created host.chet object rfxcom.0.info created host.chet object rfxcom.0.info.connection created host.chet object rfxcom.0.inclusionOn created host.chet object rfxcom.0.rawData created host.chet object rfxcom.0.firmwareVersion created host.chet object rfxcom.0.availableVersion created host.chet Set default value of rfxcom.0.info.connection: false host.chet object system.adapter.rfxcom.0 created echad@chet:/opt/iobroker $@thomas-braun
Nachdem jetzt dann alles irgendwie komisch wurde hab ich die VM komplett gelöscht und neu aufgesetzt.ioBroker auch nach Anleitung from scratch installiert.
Und alles unter iobroker user mit sudo wenn es in der Anleitung erwähnt wurde.Dann erstmal alles in ioBroker aktualisiert was ein update haben wollte.
Adapter rfxcom als erstes installiert und der geht nun.
Aber dafür der ZigBee nicht mehr. -
@thomas-braun
Nachdem jetzt dann alles irgendwie komisch wurde hab ich die VM komplett gelöscht und neu aufgesetzt.ioBroker auch nach Anleitung from scratch installiert.
Und alles unter iobroker user mit sudo wenn es in der Anleitung erwähnt wurde.Dann erstmal alles in ioBroker aktualisiert was ein update haben wollte.
Adapter rfxcom als erstes installiert und der geht nun.
Aber dafür der ZigBee nicht mehr.@forum-merlin sagte in RFXCOM Adapter lässt sich nicht installieren:
Und alles unter iobroker user
iobrokerist auch keine clevere Wahl. Es gibt schon einen system user mit dem Namen.
Zeig mal diecat /etc/passwd | sort -
@forum-merlin sagte in RFXCOM Adapter lässt sich nicht installieren:
Und alles unter iobroker user
iobrokerist auch keine clevere Wahl. Es gibt schon einen system user mit dem Namen.
Zeig mal diecat /etc/passwd | sortiobroker@vm-iobroker:~$ cat /etc/passwd | sort _apt:x:42:65534::/nonexistent:/usr/sbin/nologin backup:x:34:34:backup:/var/backups:/usr/sbin/nologin bin:x:2:2:bin:/bin:/usr/sbin/nologin daemon:x:1:1:daemon:/usr/sbin:/usr/sbin/nologin games:x:5:60:games:/usr/games:/usr/sbin/nologin iobroker:x:1000:1000:iobroker,,,:/home/iobroker:/bin/bash irc:x:39:39:ircd:/run/ircd:/usr/sbin/nologin list:x:38:38:Mailing List Manager:/var/list:/usr/sbin/nologin lp:x:7:7:lp:/var/spool/lpd:/usr/sbin/nologin mail:x:8:8:mail:/var/mail:/usr/sbin/nologin man:x:6:12:man:/var/cache/man:/usr/sbin/nologin messagebus:x:100:107::/nonexistent:/usr/sbin/nologin news:x:9:9:news:/var/spool/news:/usr/sbin/nologin nobody:x:65534:65534:nobody:/nonexistent:/usr/sbin/nologin proxy:x:13:13:proxy:/bin:/usr/sbin/nologin root:x:0:0:root:/root:/bin/bash _rpc:x:102:65534::/run/rpcbind:/usr/sbin/nologin sshd:x:101:65534::/run/sshd:/usr/sbin/nologin statd:x:103:65534::/var/lib/nfs:/usr/sbin/nologin sync:x:4:65534:sync:/bin:/bin/sync systemd-network:x:998:998:systemd Network Management:/:/usr/sbin/nologin systemd-timesync:x:997:997:systemd Time Synchronization:/:/usr/sbin/nologin sys:x:3:3:sys:/dev:/usr/sbin/nologin uucp:x:10:10:uucp:/var/spool/uucp:/usr/sbin/nologin www-data:x:33:33:www-data:/var/www:/usr/sbin/nologin iobroker@vm-iobroker:~$ -
iobroker@vm-iobroker:~$ cat /etc/passwd | sort _apt:x:42:65534::/nonexistent:/usr/sbin/nologin backup:x:34:34:backup:/var/backups:/usr/sbin/nologin bin:x:2:2:bin:/bin:/usr/sbin/nologin daemon:x:1:1:daemon:/usr/sbin:/usr/sbin/nologin games:x:5:60:games:/usr/games:/usr/sbin/nologin iobroker:x:1000:1000:iobroker,,,:/home/iobroker:/bin/bash irc:x:39:39:ircd:/run/ircd:/usr/sbin/nologin list:x:38:38:Mailing List Manager:/var/list:/usr/sbin/nologin lp:x:7:7:lp:/var/spool/lpd:/usr/sbin/nologin mail:x:8:8:mail:/var/mail:/usr/sbin/nologin man:x:6:12:man:/var/cache/man:/usr/sbin/nologin messagebus:x:100:107::/nonexistent:/usr/sbin/nologin news:x:9:9:news:/var/spool/news:/usr/sbin/nologin nobody:x:65534:65534:nobody:/nonexistent:/usr/sbin/nologin proxy:x:13:13:proxy:/bin:/usr/sbin/nologin root:x:0:0:root:/root:/bin/bash _rpc:x:102:65534::/run/rpcbind:/usr/sbin/nologin sshd:x:101:65534::/run/sshd:/usr/sbin/nologin statd:x:103:65534::/var/lib/nfs:/usr/sbin/nologin sync:x:4:65534:sync:/bin:/bin/sync systemd-network:x:998:998:systemd Network Management:/:/usr/sbin/nologin systemd-timesync:x:997:997:systemd Time Synchronization:/:/usr/sbin/nologin sys:x:3:3:sys:/dev:/usr/sbin/nologin uucp:x:10:10:uucp:/var/spool/uucp:/usr/sbin/nologin www-data:x:33:33:www-data:/var/www:/usr/sbin/nologin iobroker@vm-iobroker:~$@forum-merlin
Ja, ungünstig. 'Richtig' sähe der user so aus:iobroker:x:1001:1001::/home/iobroker:/usr/sbin/nologinLeg dir einen user an, der anders heißt. Hast du keinen schönen Vornamen von deinen Eltern bekommen? Oder haben die dich iobroker genannt? Oder nenn dich 'merlin'. Egal, alles gescheiter als den user 'iobroker' zu nennen.
-
@thomas-braun
Nachdem jetzt dann alles irgendwie komisch wurde hab ich die VM komplett gelöscht und neu aufgesetzt.ioBroker auch nach Anleitung from scratch installiert.
Und alles unter iobroker user mit sudo wenn es in der Anleitung erwähnt wurde.Dann erstmal alles in ioBroker aktualisiert was ein update haben wollte.
Adapter rfxcom als erstes installiert und der geht nun.
Aber dafür der ZigBee nicht mehr.@forum-merlin sagte in RFXCOM Adapter lässt sich nicht installieren:
Aber dafür der ZigBee nicht mehr.
Meldungen im LogFile?
'Geht nicht mehr' ist keine Fehlermeldung mit der irgendjemand was anfangen könnte. -
@forum-merlin sagte in RFXCOM Adapter lässt sich nicht installieren:
Aber dafür der ZigBee nicht mehr.
Meldungen im LogFile?
'Geht nicht mehr' ist keine Fehlermeldung mit der irgendjemand was anfangen könnte.Ich wollte jetzt nicht den Thread vermischen. Deswegen hab ich jetzt hier nix geschrieben und suche grad alles möglich im Forum dazu.
Aber vielleicht hast du ja gleich den treffenden Blick:2023-07-19 19:47:12.196 - info: host.vm-iobroker instance system.adapter.zigbee.0 started with pid 1144 2023-07-19 19:47:13.525 - info: zigbee.0 (1144) starting. Version 1.8.18 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.17.0, js-controller: 5.0.8 2023-07-19 19:47:13.579 - info: zigbee.0 (1144) delete old Backup files. keep only last 10 2023-07-19 19:47:13.580 - info: zigbee.0 (1144) Starting Zigbee npm ... 2023-07-19 19:47:13.697 - info: zigbee.0 (1144) Installed Version: iobroker.zigbee@1.8.18 2023-07-19 19:47:13.999 - error: zigbee.0 (1144) Configuration is not consistent with adapter state/backup! 2023-07-19 19:47:13.999 - error: zigbee.0 (1144) - PAN ID: configured=6754, adapter=510 2023-07-19 19:47:13.999 - error: zigbee.0 (1144) - Extended PAN ID: configured=00124b0018ed2fd7, adapter=00124b0018ed2fd7 2023-07-19 19:47:13.999 - error: zigbee.0 (1144) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d 2023-07-19 19:47:14.000 - error: zigbee.0 (1144) - Channel List: configured=11, adapter=11 2023-07-19 19:47:14.000 - error: zigbee.0 (1144) Please update configuration to prevent further issues. 2023-07-19 19:47:14.000 - error: zigbee.0 (1144) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. 2023-07-19 19:47:14.000 - error: zigbee.0 (1144) Re-commissioning your network will require re-pairing of all devices! 2023-07-19 19:47:14.001 - error: zigbee.0 (1144) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" 2023-07-19 19:47:14.001 - error: zigbee.0 (1144) Failed to start Zigbee 2023-07-19 19:47:14.001 - error: zigbee.0 (1144) Error herdsman start 2023-07-19 19:47:24.001 - info: zigbee.0 (1144) Try to reconnect. 1 attempts left 2023-07-19 19:47:24.002 - info: zigbee.0 (1144) Starting Zigbee npm ... 2023-07-19 19:47:24.012 - info: zigbee.0 (1144) Installed Version: iobroker.zigbee@1.8.18 2023-07-19 19:47:24.113 - error: zigbee.0 (1144) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-07-19 19:47:24.113 - error: zigbee.0 (1144) Failed to start Zigbee 2023-07-19 19:47:24.114 - error: zigbee.0 (1144) Error herdsman start 2023-07-19 19:48:45.342 - error: zigbee.0 (1144) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups') 2023-07-19 19:48:45.442 - info: zigbee.0 (1144) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"RFXCOM","serialNumber":"A1WJDDBR","pnpId":"usb-RFXCOM_RFXtrx433_A1WJDDBR-if00-port0","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"__0X00124B0018ED2FD7","pnpId":"usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018ED2FD7-if00","vendorId":"0451","productId":"16a8"},{"path":"/dev/ttyS0"},{"path":"/dev/ttyS1"},{"path":"/dev/ttyS2"},{"path":"/dev/ttyS3"}] 2023-07-19 19:50:58.641 - info: zigbee.0 (1144) cleaned everything up... 2023-07-19 19:50:58.643 - info: host.vm-iobroker stopInstance system.adapter.zigbee.0 (force=false, process=true) 2023-07-19 19:50:58.651 - info: host.vm-iobroker stopInstance system.adapter.zigbee.0 send kill signal 2023-07-19 19:50:58.645 - info: zigbee.0 (1144) Zigbee: disabling joining new devices. 2023-07-19 19:50:58.655 - warn: zigbee.0 (1144) Failed to stop zigbee during startup 2023-07-19 19:50:58.656 - info: zigbee.0 (1144) Got terminate signal TERMINATE_YOURSELF 2023-07-19 19:50:58.701 - info: zigbee.0 (1144) terminating 2023-07-19 19:50:58.702 - info: zigbee.0 (1144) Terminated (NO_ERROR): Without reason 2023-07-19 19:50:59.144 - info: zigbee.0 (1144) terminating 2023-07-19 19:50:59.230 - info: host.vm-iobroker instance system.adapter.zigbee.0 terminated with code 0 (NO_ERROR) 2023-07-19 19:51:22.922 - info: host.vm-iobroker instance system.adapter.zigbee.0 started with pid 1797 2023-07-19 19:51:24.257 - info: zigbee.0 (1797) starting. Version 1.8.18 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.17.0, js-controller: 5.0.8 2023-07-19 19:51:24.308 - info: zigbee.0 (1797) delete old Backup files. keep only last 10 2023-07-19 19:51:24.309 - info: zigbee.0 (1797) Starting Zigbee npm ... 2023-07-19 19:51:24.422 - info: zigbee.0 (1797) Installed Version: iobroker.zigbee@1.8.18 2023-07-19 19:51:24.715 - error: zigbee.0 (1797) Configuration is not consistent with adapter state/backup! 2023-07-19 19:51:24.715 - error: zigbee.0 (1797) - PAN ID: configured=6754, adapter=510 2023-07-19 19:51:24.715 - error: zigbee.0 (1797) - Extended PAN ID: configured=00124b0018ed2fd7, adapter=00124b0018ed2fd7 2023-07-19 19:51:24.715 - error: zigbee.0 (1797) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d 2023-07-19 19:51:24.716 - error: zigbee.0 (1797) - Channel List: configured=11, adapter=11 2023-07-19 19:51:24.716 - error: zigbee.0 (1797) Please update configuration to prevent further issues. 2023-07-19 19:51:24.716 - error: zigbee.0 (1797) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. 2023-07-19 19:51:24.716 - error: zigbee.0 (1797) Re-commissioning your network will require re-pairing of all devices! 2023-07-19 19:51:24.717 - error: zigbee.0 (1797) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" 2023-07-19 19:51:24.717 - error: zigbee.0 (1797) Failed to start Zigbee 2023-07-19 19:51:24.717 - error: zigbee.0 (1797) Error herdsman start 2023-07-19 19:51:34.718 - info: zigbee.0 (1797) Try to reconnect. 1 attempts left 2023-07-19 19:51:34.719 - info: zigbee.0 (1797) Starting Zigbee npm ... 2023-07-19 19:51:34.729 - info: zigbee.0 (1797) Installed Version: iobroker.zigbee@1.8.18 2023-07-19 19:51:34.834 - error: zigbee.0 (1797) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-07-19 19:51:34.834 - error: zigbee.0 (1797) Failed to start Zigbee 2023-07-19 19:51:34.834 - error: zigbee.0 (1797) Error herdsman start -
Ich wollte jetzt nicht den Thread vermischen. Deswegen hab ich jetzt hier nix geschrieben und suche grad alles möglich im Forum dazu.
Aber vielleicht hast du ja gleich den treffenden Blick:2023-07-19 19:47:12.196 - info: host.vm-iobroker instance system.adapter.zigbee.0 started with pid 1144 2023-07-19 19:47:13.525 - info: zigbee.0 (1144) starting. Version 1.8.18 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.17.0, js-controller: 5.0.8 2023-07-19 19:47:13.579 - info: zigbee.0 (1144) delete old Backup files. keep only last 10 2023-07-19 19:47:13.580 - info: zigbee.0 (1144) Starting Zigbee npm ... 2023-07-19 19:47:13.697 - info: zigbee.0 (1144) Installed Version: iobroker.zigbee@1.8.18 2023-07-19 19:47:13.999 - error: zigbee.0 (1144) Configuration is not consistent with adapter state/backup! 2023-07-19 19:47:13.999 - error: zigbee.0 (1144) - PAN ID: configured=6754, adapter=510 2023-07-19 19:47:13.999 - error: zigbee.0 (1144) - Extended PAN ID: configured=00124b0018ed2fd7, adapter=00124b0018ed2fd7 2023-07-19 19:47:13.999 - error: zigbee.0 (1144) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d 2023-07-19 19:47:14.000 - error: zigbee.0 (1144) - Channel List: configured=11, adapter=11 2023-07-19 19:47:14.000 - error: zigbee.0 (1144) Please update configuration to prevent further issues. 2023-07-19 19:47:14.000 - error: zigbee.0 (1144) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. 2023-07-19 19:47:14.000 - error: zigbee.0 (1144) Re-commissioning your network will require re-pairing of all devices! 2023-07-19 19:47:14.001 - error: zigbee.0 (1144) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" 2023-07-19 19:47:14.001 - error: zigbee.0 (1144) Failed to start Zigbee 2023-07-19 19:47:14.001 - error: zigbee.0 (1144) Error herdsman start 2023-07-19 19:47:24.001 - info: zigbee.0 (1144) Try to reconnect. 1 attempts left 2023-07-19 19:47:24.002 - info: zigbee.0 (1144) Starting Zigbee npm ... 2023-07-19 19:47:24.012 - info: zigbee.0 (1144) Installed Version: iobroker.zigbee@1.8.18 2023-07-19 19:47:24.113 - error: zigbee.0 (1144) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-07-19 19:47:24.113 - error: zigbee.0 (1144) Failed to start Zigbee 2023-07-19 19:47:24.114 - error: zigbee.0 (1144) Error herdsman start 2023-07-19 19:48:45.342 - error: zigbee.0 (1144) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups') 2023-07-19 19:48:45.442 - info: zigbee.0 (1144) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"RFXCOM","serialNumber":"A1WJDDBR","pnpId":"usb-RFXCOM_RFXtrx433_A1WJDDBR-if00-port0","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"__0X00124B0018ED2FD7","pnpId":"usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018ED2FD7-if00","vendorId":"0451","productId":"16a8"},{"path":"/dev/ttyS0"},{"path":"/dev/ttyS1"},{"path":"/dev/ttyS2"},{"path":"/dev/ttyS3"}] 2023-07-19 19:50:58.641 - info: zigbee.0 (1144) cleaned everything up... 2023-07-19 19:50:58.643 - info: host.vm-iobroker stopInstance system.adapter.zigbee.0 (force=false, process=true) 2023-07-19 19:50:58.651 - info: host.vm-iobroker stopInstance system.adapter.zigbee.0 send kill signal 2023-07-19 19:50:58.645 - info: zigbee.0 (1144) Zigbee: disabling joining new devices. 2023-07-19 19:50:58.655 - warn: zigbee.0 (1144) Failed to stop zigbee during startup 2023-07-19 19:50:58.656 - info: zigbee.0 (1144) Got terminate signal TERMINATE_YOURSELF 2023-07-19 19:50:58.701 - info: zigbee.0 (1144) terminating 2023-07-19 19:50:58.702 - info: zigbee.0 (1144) Terminated (NO_ERROR): Without reason 2023-07-19 19:50:59.144 - info: zigbee.0 (1144) terminating 2023-07-19 19:50:59.230 - info: host.vm-iobroker instance system.adapter.zigbee.0 terminated with code 0 (NO_ERROR) 2023-07-19 19:51:22.922 - info: host.vm-iobroker instance system.adapter.zigbee.0 started with pid 1797 2023-07-19 19:51:24.257 - info: zigbee.0 (1797) starting. Version 1.8.18 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.17.0, js-controller: 5.0.8 2023-07-19 19:51:24.308 - info: zigbee.0 (1797) delete old Backup files. keep only last 10 2023-07-19 19:51:24.309 - info: zigbee.0 (1797) Starting Zigbee npm ... 2023-07-19 19:51:24.422 - info: zigbee.0 (1797) Installed Version: iobroker.zigbee@1.8.18 2023-07-19 19:51:24.715 - error: zigbee.0 (1797) Configuration is not consistent with adapter state/backup! 2023-07-19 19:51:24.715 - error: zigbee.0 (1797) - PAN ID: configured=6754, adapter=510 2023-07-19 19:51:24.715 - error: zigbee.0 (1797) - Extended PAN ID: configured=00124b0018ed2fd7, adapter=00124b0018ed2fd7 2023-07-19 19:51:24.715 - error: zigbee.0 (1797) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d 2023-07-19 19:51:24.716 - error: zigbee.0 (1797) - Channel List: configured=11, adapter=11 2023-07-19 19:51:24.716 - error: zigbee.0 (1797) Please update configuration to prevent further issues. 2023-07-19 19:51:24.716 - error: zigbee.0 (1797) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. 2023-07-19 19:51:24.716 - error: zigbee.0 (1797) Re-commissioning your network will require re-pairing of all devices! 2023-07-19 19:51:24.717 - error: zigbee.0 (1797) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" 2023-07-19 19:51:24.717 - error: zigbee.0 (1797) Failed to start Zigbee 2023-07-19 19:51:24.717 - error: zigbee.0 (1797) Error herdsman start 2023-07-19 19:51:34.718 - info: zigbee.0 (1797) Try to reconnect. 1 attempts left 2023-07-19 19:51:34.719 - info: zigbee.0 (1797) Starting Zigbee npm ... 2023-07-19 19:51:34.729 - info: zigbee.0 (1797) Installed Version: iobroker.zigbee@1.8.18 2023-07-19 19:51:34.834 - error: zigbee.0 (1797) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-07-19 19:51:34.834 - error: zigbee.0 (1797) Failed to start Zigbee 2023-07-19 19:51:34.834 - error: zigbee.0 (1797) Error herdsman start@forum-merlin sagte in RFXCOM Adapter lässt sich nicht installieren:
Steht doch da:
2023-07-19 19:47:13.999 - error: zigbee.0 (1144) Configuration is not consistent with adapter state/backup!
2023-07-19 19:47:13.999 - error: zigbee.0 (1144) - PAN ID: configured=6754, adapter=510Die IDs müsssen übereinstimmen.
-
@forum-merlin sagte in RFXCOM Adapter lässt sich nicht installieren:
Steht doch da:
2023-07-19 19:47:13.999 - error: zigbee.0 (1144) Configuration is not consistent with adapter state/backup!
2023-07-19 19:47:13.999 - error: zigbee.0 (1144) - PAN ID: configured=6754, adapter=510Die IDs müsssen übereinstimmen.
@thomas-braun
Danke Dir für Deine Hilfe.Hab nun alles am Laufen.
(Allerdings hab ich einfach nochmal von vorne angefangen und dann auch nen anderen usernamen als initialen user verwendet. Ich hab im installer Script dann auch gesehen, dass da der user iobroker mitkommt. wer weiss wie sich das auswirkt)Naja, wie auch immer, geht jetzt.
CLOSED!
454
Online32.4k
Users81.5k
Topics1.3m
Posts