[Adapter] cloudfreie Auslesung von Deye-Invertern

oFbEQnpoLKKl6mbY5e13

Immer noch RangeError.

Rene55

@ofbeqnpolkkl6mby5e13 Dann hab ich es noch nicht gefunden.

GMJ

@rene55
ja Error ist noch da.

deyeidc.0
2023-10-05 10:41:19.890 error RangeError [ERR_OUT_OF_RANGE]: The value of "offset" is out of range. It must be >= 0 and <= 11. Received 13
deyeidc.0
2023-10-05 10:41:17.792 error TypeError: Cannot read properties of undefined (reading 'registerStart')

Alexander Aschenbrenner

Servus, bei mir das gleiche seit dem ich vor Stunden das Relais verbaut habe. Hab den Sun 800.
Kann ich mit Daten, Log,... helfen?

Danke, Gruß Alex.

Rene55

@alexander-aschenbrenner Das heißt: Relais und neue Firmware 2.x. Welcher Fehler ist denn bei dir im Log? Gib mir mal zwei, drei Zeilen.

Alexander Aschenbrenner

@rene55 genau. Erst seit dem Verbau des Relais kamen die Fehlermeldungen. Firmware MW3_16U_5406_2.32-D1

2023-10-06 10:24:54.839 - error: deyeidc.0 (3915560) RangeError [ERR_OUT_OF_RANGE]: The value of "offset" is out of range. It must be >= 0 and <= 7. Received 11
2023-10-06 10:24:56.634 - error: deyeidc.0 (3915560) RangeError [ERR_OUT_OF_RANGE]: The value of "offset" is out of range. It must be >= 0 and <= 11. Received 13
2023-10-06 10:24:57.234 - error: deyeidc.0 (3915560) RangeError [ERR_OUT_OF_RANGE]: The value of "offset" is out of range. It must be >= 0 and <= 11. Received 13
2023-10-06 10:24:57.834 - error: deyeidc.0 (3915560) RangeError [ERR_OUT_OF_RANGE]: The value of "offset" is out of range. It must be >= 0 and <= 10. Received 11
2023-10-06 10:25:00.235 - error: deyeidc.0 (3915560) RangeError [ERR_OUT_OF_RANGE]: The value of "offset" is out of range. It must be >= 0 and <= 11. Received 13
2023-10-06 10:25:00.836 - error: deyeidc.0 (3915560) RangeError [ERR_OUT_OF_RANGE]: The value of "offset" is out of range. It must be >= 0 and <= 11. Received 13
2023-10-06 10:25:01.437 - error: deyeidc.0 (3915560) RangeError [ERR_OUT_OF_RANGE]: The value of "offset" is out of range. It must be >= 0 and <= 10. Received 11
2023-10-06 10:25:02.039 - error: deyeidc.0 (3915560) RangeError [ERR_OUT_OF_RANGE]: The value of "offset" is out of range. It must be >= 0 and <= 7. Received 11

Bitteschön.

Rene55

@alexander-aschenbrenner Danke für die Infos. Ich darf mir nicht vorstellen, dass Deye hier was Grundlegendes geändert hat. Kannst du mir mal deine Konfigurations-Datei zuschicken. Auch wenn es genau die 'meine' ist. Gerne auch per Mail.

Alexander Aschenbrenner

@rene55

{
  "ipaddress": "192.168.200.95",
  "port": 8899,
  "pollInterval": 60,
  "registers": [
    {
      "registerStart": 0,
      "registerEnd": 40
    },
    {
      "registerStart": 59,
      "registerEnd": 90
    },
    {
      "registerStart": 109,
      "registerEnd": 112
    },
    {
      "registerStart": 150,
      "registerEnd": 153
    }
  ],
  "coils": [
    {
      "register": 0,
      "rules": 1,
      "key": "DT",
      "name": "Device Type",
      "unit": "",
      "factor": 0
    },
    {
      "register": 2,
      "rules": 7,
      "key": "COMM_PTC_v1",
      "name": "Communication Protocol Version",
      "unit": "",
      "factor": 0
    },
    {
      "register": 3,
      "rules": 5,
      "key": "SN1",
      "name": "Inverter Serial Number",
      "unit": "",
      "factor": 0
    },
    {
      "register": 13,
      "rules": 7,
      "key": "DC_M_FV",
      "name": "Control Board Firmware",
      "unit": "",
      "factor": 0
    },
    {
      "register": 14,
      "rules": 7,
      "key": "AC_VER",
      "name": "Communication Board Firmware",
      "unit": "",
      "factor": 0
    },
    {
      "register": 16,
      "rules": 3,
      "key": "RP",
      "name": "Rated Power",
      "unit": "W",
      "factor": 1
    },
    {
      "register": 18,
      "rules": 8,
      "key": "NOMP",
      "name": "Number of MPPT Path",
      "unit": "",
      "factor": 0
    },
    {
      "register": 18,
      "rules": 9,
      "key": "NOP",
      "name": "Number of Phases",
      "unit": "",
      "factor": 0
    },
    {
      "register": 21,
      "rules": 1,
      "key": "SScT",
      "name": "Startup Self-checking Time",
      "unit": "",
      "factor": 0
    },
    {
      "register": 40,
      "rules": 1,
      "key": "Power_Reg",
      "name": "Active Power Regulation",
      "unit": "%",
      "factor": 0,
      "nullable": true
    },
    {
      "register": 59,
      "rules": 1,
      "key": "ST_w1",
      "name": "Running Status",
      "unit": "",
      "factor": 0
    },
    {
      "register": 60,
      "rules": 1,
      "key": "Etdy_ge0",
      "name": "Production Today",
      "unit": "kWh",
      "factor": 1
    },
    {
      "register": 63,
      "rules": 1,
      "key": "Et_ge0",
      "name": "Production Total",
      "unit": "kWh",
      "factor": 1,
      "nullable": true
    },
    {
      "register": 65,
      "rules": 1,
      "key": "Etdy_ge1",
      "name": "Production Today PV1",
      "unit": "kWh",
      "factor": 1
    },
    {
      "register": 66,
      "rules": 1,
      "key": "Etdy_ge2",
      "name": "Production Today PV2",
      "unit": "kWh",
      "factor": 1
    },
    {
      "register": 69,
      "rules": 3,
      "key": "Et_ge1",
      "name": "Production Total PV1",
      "unit": "kWh",
      "factor": 1
    },
    {
      "register": 71,
      "rules": 3,
      "key": "Et_ge2",
      "name": "Production Total PV2",
      "unit": "kWh",
      "factor": 1,
      "nullable": false
    },
    {
      "register": 73,
      "rules": 1,
      "key": "AV1",
      "name": "AC Voltage 1",
      "unit": "V",
      "factor": 1
    },
    {
      "register": 79,
      "rules": 1,
      "key": "AC_Fo1",
      "name": "AC Frequency 1",
      "unit": "Hz",
      "factor": 2
    },
    {
      "register": 86,
      "rules": 3,
      "key": "Apo_t1",
      "name": "Total AC Output Power (Active)",
      "unit": "W",
      "factor": 1
    },
    {
      "register": 90,
      "rules": 6,
      "key": "AC_RDT_T1",
      "name": "AC Radiator Temp",
      "unit": "°C",
      "factor": 2,
      "nullable": false
    },
    {
      "register": 109,
      "rules": 1,
      "key": "DV1",
      "name": "DC Voltage PV1",
      "unit": "V",
      "factor": 1,
      "nullable": false
    },
    {
      "register": 110,
      "rules": 1,
      "key": "DC1",
      "name": "DC Current PV1",
      "unit": "A",
      "factor": 1
    },
    {
      "register": 111,
      "rules": 1,
      "key": "DV2",
      "name": "DC Voltage PV2",
      "unit": "V",
      "factor": 1
    },
    {
      "register": 112,
      "rules": 1,
      "key": "DC2",
      "name": "DC Current PV2",
      "unit": "A",
      "factor": 1,
      "nullable": false
    },
    {
      "register": 150,
      "rules": 1,
      "key": "GV_uL",
      "name": "Grid Voltage Upper Limit",
      "unit": "V",
      "factor": 1,
      "nullable": false
    },
    {
      "register": 151,
      "rules": 1,
      "key": "GV_lL",
      "name": "Grid Voltage Lower Limit",
      "unit": "V",
      "factor": 1,
      "nullable": false
    },
    {
      "register": 152,
      "rules": 1,
      "key": "GF_uL",
      "name": "Grid Frequency Upper Limit",
      "unit": "Hz",
      "factor": 2,
      "nullable": true
    },
    {
      "register": 153,
      "rules": 1,
      "key": "GF_lL",
      "name": "Grid Frequency Lower Limit",
      "unit": "Hz",
      "factor": 2,
      "nullable": true
    }
  ],
  "computes": [
    {
      "values": "DV1*DC1",
      "key": "DP1",
      "name": "DC Power PV1",
      "unit": "W",
      "factor": 0
    },
    {
      "values": "DV2*DC2",
      "key": "DP2",
      "name": "DC Power PV2",
      "unit": "W",
      "factor": 0
    },
    {
      "values": "Power_Reg*RP",
      "key": "LP",
      "name": "Limited Power",
      "unit": "W",
      "factor": 2
    }
  ],
  "logger": 3904723806
}

Rene55

@alexander-aschenbrenner Es ist zum Mäusemelken! Datei eingespielt - alles funktioniert ohne RangeError.
Mag der Geier wissen, woran das liegt. Ich warte weiter auf mein Relais.

Alexander Aschenbrenner

@rene55 evtl. weil durch das Relais auch noch Daten übertragen werden!?
2023-10-06 13_13_39-SOLARMAN Smart.png 2023-10-06 13_14_36-SOLARMAN Smart.png

Alexander Aschenbrenner

@rene55 wenn's dir hilft kann ich dir auch den Port für den Deye öffnen!? Weiteres dann per PN.

Rene55

@alexander-aschenbrenner Es kann gut sein, dass die neue Firmware auch Daten vom Relais überträgt. Deswegen sollte aber das grundsätzliche Vorgehen, dass wir die (schon bekannten) Register auslesen, nicht völlig verändert sein.
Ja, wenn ich direkt den WR auslesen könnte, könnte schon helfen. Hab ich zwar noch nie gemacht - aber ein Versuch wäre es ja Wert.

Alexander Aschenbrenner

@rene55 hab dir eine Email geschickt.

Rene55

@alexander-aschenbrenner Danke Alexander. Ich hab gerade mal versucht - klappt so nicht. Error: getaddrinfo ENOTFOUND http://alexxxxxx

Alexander Aschenbrenner

@rene55 schade. Dann schließe ich den Port wieder, oder fällt dir noch was ein?

Rene55

@alexander-aschenbrenner Nee, leider nicht. Da hab ich dann doch zuwenig Ahnung vom Netzwerken und vom Freigeben insbesondere. Wäre ja auch zu einfach gewesen.

Alexander Aschenbrenner

@rene55 Servus, hast Email. So klappt es bei meinem Testsystem.

Alexander Aschenbrenner

@rene55 und hier bekomme ich eine andere Fehlermeldung.

2023-10-07 09:37:33.832 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! dc
2023-10-07 09:37:35.507 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! be
2023-10-07 09:37:35.510 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! be
2023-10-07 09:37:35.608 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! 74
2023-10-07 09:37:36.208 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! 58
2023-10-07 09:37:37.407 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! dc
2023-10-07 09:37:38.007 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! be
2023-10-07 09:37:38.608 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! be
2023-10-07 09:37:39.206 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! 74
2023-10-07 09:37:39.810 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! 59
2023-10-07 09:37:41.007 - error: deyeidc.0 (27888) Error: Frame CheckSum faulty! dc

Alexander Aschenbrenner

@rene55 funktioniert die Verbindung?

Rene55

@alexander-aschenbrenner Ähm. Hast du den Port (neu) freigeschaltet? Dann versuche ich es noch einmal.

NEWS

[Adapter] cloudfreie Auslesung von Deye-Invertern

Support us

983
Online

31.7k
Users

79.7k
Topics

1.3m
Posts

NEWS

[Adapter] cloudfreie Auslesung von Deye-Invertern

Support us

983Online

31.7kUsers

79.7kTopics

1.3mPosts

983
Online

31.7k
Users

79.7k
Topics

1.3m
Posts