alte iobroker images

Flinke Flasche

probiere gerade noch was anderes. wenns nicht klappt teste ich das mal.

danke

Flinke Flasche

hat schon mal ein bisschen verbessert.
Der Adapter startet, zieht sich Daten und schließt sich dann.

	2022-01-15 14:31:25.350	error	The id is empty! Please provide a valid id.

arcam.0
2022-01-15 14:31:25.349	error	Error: The id is empty! Please provide a valid id. at validateId (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:501:19) at Adapter.setState (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:6081:17) at Socket.<anonymous> (/opt/iobroker/node_modules/iobroker.arcam/arcam.js:438:14) at Socket.emit (events.js:314:20) at addChunk (_stream_readable.js:297:12) at readableAddChunk (_stream_readable.js:272:9) at Socket.Readable.push (_stream_readable.js:213:10) at TCP.onStreamRead (internal/stream_base_commons.js:188:23)

arcam.0
2022-01-15 14:31:25.337	error	unhandled promise rejection: The id is empty! Please provide a valid id.

arcam.0
2022-01-15 14:31:25.335	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

Homoran

@flinke-flasche sagte in alte iobroker images:

zieht sich Daten

tut er das?

@flinke-flasche sagte in alte iobroker images:

The id is empty! Please provide a valid id.

Flinke Flasche

@homoran

ja, das sind die Daten aus dem ARCAM

m.0
2022-01-15 15:36:20.086	debug	State *** arcamAudio.DolbyLeveller.Level *** set with value *** 0 ***

arcam.0
2022-01-15 15:36:20.083	debug	Message Received: <<< Rx_Zn: 01 Cc: 39 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:20.038	debug	Gesendet wird: TxCc= 57 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:19.813	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

arcam.0
2022-01-15 15:36:19.812	info	terminating

arcam.0
2022-01-15 15:36:19.680	debug	State *** arcamAudio.DolbyVolume.CalOffset.Level *** set with value *** 15 ***

arcam.0
2022-01-15 15:36:19.678	debug	Message Received: <<< Rx_Zn: 01 Cc: 3a Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 0f >>>

arcam.0
2022-01-15 15:36:19.634	debug	Gesendet wird: TxCc= 58 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:19.477	debug	State *** arcamAudio.DolbyVolume.Status *** set with value *** Dolby Volume off ***

arcam.0
2022-01-15 15:36:19.476	debug	Message Received: <<< Rx_Zn: 01 Cc: 38 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:19.431	debug	Gesendet wird: TxCc= 56 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:19.309	debug	<< ADAPTER UNLOAD >>

arcam.0
2022-01-15 15:36:19.298	error	The id is empty! Please provide a valid id.

arcam.0
2022-01-15 15:36:19.297	error	Error: The id is empty! Please provide a valid id. at validateId (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:501:19) at Adapter.setState (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:6081:17) at Socket.<anonymous> (/opt/iobroker/node_modules/iobroker.arcam/arcam.js:438:14) at Socket.emit (events.js:314:20) at addChunk (_stream_readable.js:297:12) at readableAddChunk (_stream_readable.js:272:9) at Socket.Readable.push (_stream_readable.js:213:10) at TCP.onStreamRead (internal/stream_base_commons.js:188:23)

arcam.0
2022-01-15 15:36:19.285	error	unhandled promise rejection: The id is empty! Please provide a valid id.

arcam.0
2022-01-15 15:36:19.284	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

arcam.0
2022-01-15 15:36:19.280	debug	State *** undefined *** set with value *** ***

arcam.0
2022-01-15 15:36:19.274	debug	Message Received: <<< Rx_Zn: 01 Cc: 4e Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:19.228	debug	Gesendet wird: TxCc= 78 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:19.075	debug	State *** arcamAudio.Mode.RoomEq *** set with value *** Room Eq On ***

arcam.0
2022-01-15 15:36:19.072	debug	Message Received: <<< Rx_Zn: 01 Cc: 37 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 01 >>>

arcam.0
2022-01-15 15:36:19.025	debug	Gesendet wird: TxCc= 55 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:18.671	debug	State *** arcamTuner.FM.Info.Genre *** set with value *** ***

arcam.0
2022-01-15 15:36:18.668	debug	Message Received: <<< Rx_Zn: 01 Cc: 03 Rx_Ac: 00 Rx_Dl: 00 Rx_Data: >>>

arcam.0
2022-01-15 15:36:18.619	debug	Gesendet wird: TxCc= 3 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:18.469	debug	State *** arcamInput.Video *** set with value *** BD ***

arcam.0
2022-01-15 15:36:18.466	debug	Message Received: <<< Rx_Zn: 01 Cc: 0a Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:18.415	debug	Gesendet wird: TxCc= 10 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:18.258	debug	State *** arcamAudio.Mode.DecodeMode.2Channel *** set with value *** DTS Neural:X ***

arcam.0
2022-01-15 15:36:18.255	debug	Message Received: <<< Rx_Zn: 01 Cc: 10 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 0a >>>

arcam.0
2022-01-15 15:36:18.210	debug	Gesendet wird: TxCc= 16 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:18.053	debug	State *** arcamAudio.Mode.DecodeMode.MultiChannel *** set with value *** DTS-ES / Neural:X ***

arcam.0
2022-01-15 15:36:18.051	debug	Message Received: <<< Rx_Zn: 01 Cc: 11 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 03 >>>

arcam.0
2022-01-15 15:36:18.007	debug	Gesendet wird: TxCc= 17 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:17.867	debug	State *** arcamTuner.DAB.Info.DLS_PDT_Info *** set with value ***  ***

arcam.0
2022-01-15 15:36:17.863	debug	Message Received: <<< Rx_Zn: 01 Cc: 1a Rx_Ac: 00 Rx_Dl: 81 Rx_Data: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 >>>

arcam.0
2022-01-15 15:36:17.804	debug	Gesendet wird: TxCc= 26 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:17.649	debug	State *** arcamAudio.Info.IncomingAudioSampleRate *** set with value *** 48 kHz ***

arcam.0
2022-01-15 15:36:17.647	debug	Message Received: <<< Rx_Zn: 01 Cc: 44 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 02 >>>

arcam.0
2022-01-15 15:36:17.602	debug	Gesendet wird: TxCc= 68 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:17.459	debug	State *** arcamAudio.Info.IncomingAudioFormat *** set with value *** Undetected / Undetected ***

arcam.0
2022-01-15 15:36:17.446	debug	Message Received: <<< Rx_Zn: 01 Cc: 43 Rx_Ac: 00 Rx_Dl: 02 Rx_Data: 1521 >>>

arcam.0
2022-01-15 15:36:17.398	debug	Gesendet wird: TxCc= 67 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:17.219	debug	State *** arcamDisplay.FrontDisplay.InfoType *** set with value *** Processing Mode ***

arcam.0
2022-01-15 15:36:17.215	debug	Message Received: <<< Rx_Zn: 01 Cc: 09 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:17.170	debug	Gesendet wird: TxCc= 9 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:17.014	debug	State *** arcamVideo.Info.IncomingVideoMode *** set with value *** 1x15120 153Hz undefinedundefined ***

arcam.0
2022-01-15 15:36:17.012	debug	Message Received: <<< Rx_Zn: 01 Cc: 42 Rx_Ac: 00 Rx_Dl: 07 Rx_Data: 00013b10997400 >>>

arcam.0
2022-01-15 15:36:16.964	debug	Gesendet wird: TxCc= 66 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:16.811	debug	State *** arcamInput.Input2 *** set with value *** Follow Zone 1 ***

arcam.0
2022-01-15 15:36:16.809	debug	Message Received: <<< Rx_Zn: 02 Cc: 1d Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:16.760	debug	Gesendet wird: TxCc= 29 TxZn: 02 TxData: 240

arcam.0
2022-01-15 15:36:16.609	debug	State *** arcamInput.Input *** set with value *** BD ***

arcam.0
2022-01-15 15:36:16.607	debug	Message Received: <<< Rx_Zn: 01 Cc: 1d Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 02 >>>

arcam.0
2022-01-15 15:36:16.557	debug	Gesendet wird: TxCc= 29 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:16.207	debug	State *** arcamSystem.Power2 *** set with value *** 00 ***

arcam.0
2022-01-15 15:36:16.203	debug	Message Received: <<< Rx_Zn: 02 Cc: 00 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:16.152	debug	Gesendet wird: TxCc= 0 TxZn: 02 TxData: 240

arcam.0
2022-01-15 15:36:15.996	debug	State *** arcamSystem.Power *** set with value *** 00 ***

arcam.0
2022-01-15 15:36:15.993	debug	Message Received: <<< Rx_Zn: 01 Cc: 00 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:15.948	debug	Gesendet wird: TxCc= 0 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:15.793	debug	State *** arcamAudio.Mode.Compression *** set with value *** Off ***

arcam.0
2022-01-15 15:36:15.791	debug	Message Received: <<< Rx_Zn: 01 Cc: 41 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:15.744	debug	Gesendet wird: TxCc= 65 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:15.590	debug	State *** arcamDisplay.FrontDisplay.Brightness *** set with value *** Off ***

arcam.0
2022-01-15 15:36:15.587	debug	Message Received: <<< Rx_Zn: 01 Cc: 01 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:15.539	debug	Gesendet wird: TxCc= 1 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:15.379	debug	State *** arcamAudio.Info.Headphones.Status *** set with value *** Headphones Not Connected ***

arcam.0
2022-01-15 15:36:15.375	debug	Message Received: <<< Rx_Zn: 01 Cc: 02 Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:15.330	debug	Gesendet wird: TxCc= 2 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:15.177	debug	State *** arcamAudio.Volume.Mute2 *** set with value *** 1 ***

arcam.0
2022-01-15 15:36:15.173	debug	Message Received: <<< Rx_Zn: 02 Cc: 0e Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 00 >>>

arcam.0
2022-01-15 15:36:15.126	debug	Gesendet wird: TxCc= 14 TxZn: 02 TxData: 240

arcam.0
2022-01-15 15:36:14.975	debug	State *** arcamAudio.Volume.Mute *** set with value *** 0 ***

arcam.0
2022-01-15 15:36:14.971	debug	Message Received: <<< Rx_Zn: 01 Cc: 0e Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 01 >>>

arcam.0
2022-01-15 15:36:14.922	debug	Gesendet wird: TxCc= 14 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:14.774	debug	State *** arcamAudio.Volume.Volume2 *** set with value *** 50 ***

arcam.0
2022-01-15 15:36:14.771	debug	Message Received: <<< Rx_Zn: 02 Cc: 0d Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 32 >>>

arcam.0
2022-01-15 15:36:14.717	debug	Gesendet wird: TxCc= 13 TxZn: 02 TxData: 240

arcam.0
2022-01-15 15:36:14.568	debug	State *** arcamAudio.Volume.Volume *** set with value *** 50 ***

arcam.0
2022-01-15 15:36:14.560	debug	Message Received: <<< Rx_Zn: 01 Cc: 0d Rx_Ac: 00 Rx_Dl: 01 Rx_Data: 32 >>>

arcam.0
2022-01-15 15:36:14.513	debug	Gesendet wird: TxCc= 13 TxZn: 01 TxData: 240

arcam.0
2022-01-15 15:36:14.488	debug	verification of states completed - starting autoRequest

arcam.0
2022-01-15 15:36:12.585	info	State value to set for "arcam.0.arcamSystem.Info.Connected" has to be type "bool" but received type "number"

arcam.0
2022-01-15 15:36:12.572	debug	adapter connected to ARCAM-AVR: 192.168.0.99:5000

arcam.0
2022-01-15 15:36:12.455	debug	<< ADAPTER MAIN BLOCK >>

arcam.0
2022-01-15 15:36:12.453	debug	<< ADAPTER READY >>

Homoran

@flinke-flasche sagte in alte iobroker images:

ja

was für eine ID fehlt ihm denn?

Flinke Flasche

@homoran

keine Ahnung

Homoran

@flinke-flasche sagte in alte iobroker images:

keine Ahnung

aber ich????

Ich kenne den Adapter nicht und weiß nicht wo da eine ID eingegeben werden muss.
Ohne Screenshot der Instanzenkonfig bin ich im Blindflug

Hast du dir die Konfig nach der Meldung wenigstens mal angesehen?

Flinke Flasche

@homoran

es kann nirgends eine ID eingegeben werden.

Bildschirmfoto 2022-01-15 um 16.06.40.jpg

Homoran

@flinke-flasche sagte in alte iobroker images:

es kann nirgends eine ID eingegeben werden.

dann zeig mal die Objects

Flinke Flasche

@homoran

da gibt es sehr viele Ordner

Bildschirmfoto 2022-01-15 um 16.11.58.jpg

Homoran

Ich habe keine Ahnung, das müsste sich ein Dev ansehen.
Eine angemeckerte Stelle ist:

					adapter.setState(stateName, {
					val: stateVal,
					ack: true
					});

https://github.com/Schorsch99/ioBroker.arcam/blob/master/arcam.js#L438

Flinke Flasche

@homoran

ich auch nicht.
Trotzdem DANKE für deine Zeit und fürs helfen.

Muss mir evtl. doch mal ne neue Fernbedienung suchen.

Flinke Flasche

Ich habe es nun hinbekommen.

Ich habe eine altes Image im Netz gefunden und installiert.

Der Arcam Adapter funktionierte, allerdings brauchte ich noch den SimpleAPI Adapter. Dafür musste ich den js.Controller aktualisieren.
Mit der aktuellen Version 3.3 ging es wieder nicht.
Danach habe ich auf 2.2.10 downgegradet und nun funktioniert wieder alles.

Vermutlich funktioniert es auch wenn ich das aktuelle Image verwende und da versuche den js.controller downgrade.

Homoran

@flinke-flasche sagte in alte iobroker images:

da versuche den js.controller downgrade.

nein, weil dann einiges anderes (u.a. der admin) nicht mehr laufen.

@flinke-flasche sagte in alte iobroker images:

Ich habe eine altes Image im Netz gefunden und installiert.

denn mal viel Glück
man kann auch keine Aktuelle Software unter win 3.11 installieren

Flinke Flasche

@homoran

Danke.
Werd mir jetzt das Image abspeichern als Sicherheit.

Da hast du natürlich recht.

Community Forum

NEWS

alte iobroker images

Support us

409

32.4k

81.5k

1.3m