NEWS
Zme_uzb1 neues Spielzeug neue Probleme
-
bin mit der configuration nicht so einig…
zwave adapter und openzwave installiert alles grün im raspbian light
ok also Stick rein in den Pi3..
lsusb
Bus 001 Device 009: ID 0658:0200 Sigma Designs, Inc. Bus 001 Device 008: ID 0781:5583 SanDisk Corp. Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
müsste device 009 sein
aber bekomme keine Kommunikation hin…
cmdline.txt geändert
dwc_otg.lpm_enable=0 console=tty1
dmesg |grep tty - gefällt mir nicht oder soll das so sein
[ 0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa02082 bcm2709.serial=0xc516118a smsc95xx.macaddr=B8:27:EB:16:11:8A bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline rootwait rootdeley=5 [ 0.001327] console [tty1] enabled [b][ 1.731741] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2[/b] [ 6.352154] systemd[1]: Expecting device dev-ttyS0.device... [ 6.566733] systemd[1]: Starting system-getty.slice. [ 6.572102] systemd[1]: Created slice system-getty.slice. [ 6.574111] systemd[1]: Starting system-serial\x2dgetty.slice. [ 6.578610] systemd[1]: Created slice system-serial\x2dgetty.slice.
das ding scheint immer noch auf serialle Schnittstelle zu horchen oder ???
-
Ist AMA0 nicht die interne serielle Schnittstelle?
-
ich schätze das ist mein Problem… die muss ich umbiegen
crw-rw---- 1 root dialout 204, 64 Feb 17 16:44 /dev/ttyAMA0
laut http://ww.iobroker.com/forum/viewtopic.php?f=30&t=4158 von Homoran ist es richtig
oder musste da ein ttyUSBX sein .. ist ja schliesslich ein USB Stick…
-
So muss das aussehen oder?
-
so muss das
hab mal eben alles neu aufgesetzt..und siehe da..