Zigbee Geräte reagieren plötzlich nicht mehr. [Erledigt]
-
Ich habe mir jetzt nen CC2538 bestellt. Der kommt hoffentlich morgen.
Eben habe ich noch mal 10 oder so Zigbee Geräte gelöscht, aber das hat auch nichts gebracht.
Der Kooperatior kann nur Daten empfangen aber nicht senden. Dann werde ich wohl heute wieder im dunklem sitzen und hoffen das dann morgen mit dem CC2538 alles wieder klappt.@atomicix sagte in Zigbee Geräte reagieren plötzlich nicht mehr.:
Ich habe mir jetzt nen CC2538 bestellt. Der kommt hoffentlich morgen.
Eben habe ich noch mal 10 oder so Zigbee Geräte gelöscht, aber das hat auch nichts gebracht.
Der Kooperatior kann nur Daten empfangen aber nicht senden. Dann werde ich wohl heute wieder im dunklem sitzen und hoffen das dann morgen mit dem CC2538 alles wieder klappt.Was du tun musst um den cc2531 wieder aktiv zu bekommen ist ein soft reset. Dazu gibt es im Adapter in der Konfiguration einen Button. Der Soft-Reset sorgt nicht dafür das die Geräte neu angelernt werden müssen. Danach sollte der Stick funktionieren bis du den anderen bekommst.
A.
ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
"Shit don't work" ist keine Fehlermeldung, sondern ein Fluch. -
@atomicix sagte in Zigbee Geräte reagieren plötzlich nicht mehr.:
Ich habe mir jetzt nen CC2538 bestellt. Der kommt hoffentlich morgen.
Eben habe ich noch mal 10 oder so Zigbee Geräte gelöscht, aber das hat auch nichts gebracht.
Der Kooperatior kann nur Daten empfangen aber nicht senden. Dann werde ich wohl heute wieder im dunklem sitzen und hoffen das dann morgen mit dem CC2538 alles wieder klappt.Was du tun musst um den cc2531 wieder aktiv zu bekommen ist ein soft reset. Dazu gibt es im Adapter in der Konfiguration einen Button. Der Soft-Reset sorgt nicht dafür das die Geräte neu angelernt werden müssen. Danach sollte der Stick funktionieren bis du den anderen bekommst.
A.
@asgothian das hat leider nicht funktioniert. Egal, dann muss ich da halt durch bis (hoffentlich) morgen.
-
@atomicix das ist nicht komisch sondern ist so.. je länger das olle Ding läuft und je mehr Geräte man über die Zeit einbindet desto problematischer wird dieser .. ganz einfach.. der Speicher läuft über.. auf die Nutzzeit und anzahl der Geräte bezogen
@arteck
Ich habe heute meinen CC2538 bekommen. Einmal die Sticks getauscht und den neuen Serial Port gesucht, eingestellt und los....
Leider läuft das nicht.
Ich habe es erst mitls -la /dev/serial/by-id total 0 drwxr-xr-x 2 root root 80 Jun 26 15:03 . drwxr-xr-x 4 root root 80 Jun 26 14:56 .. lrwxrwxrwx 1 root root 13 Jun 26 14:56 usb-FTDI_FT232R_USB_UART_AQ001XTW-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 Jun 26 15:03 usb-Texas_Instruments_CC2538_USB_CDC-if00 -> ../../ttyACM0probiert, später dann noch mal mit ttyACM0 , aber ich bekomme ich die Logmeldungen...
host.raspberrypi 2021-06-26 15:07:34.834 warn Do not restart adapter system.adapter.zigbee.0 because restart loop detected host.raspberrypi 2021-06-26 15:07:34.834 info Restart adapter system.adapter.zigbee.0 because enabled host.raspberrypi 2021-06-26 15:07:34.833 error instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION) zigbee.0 2021-06-26 15:07:34.017 warn (2816) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-26 15:07:34.015 info (2816) terminating zigbee.0 2021-06-26 15:07:33.499 info (2816) Zigbee: disabling joining new devices. zigbee.0 2021-06-26 15:07:33.496 info (2816) cleaned everything up... zigbee.0 2021-06-26 15:07:33.471 error (2816) Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:07:33.470 error (2816) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:449:36) at processTicksAndRejections (internal/proce zigbee.0 2021-06-26 15:07:33.469 error (2816) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:07:33.468 error (2816) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-26 15:07:11.454 info (2816) Zigbee started zigbee.0 2021-06-26 15:07:11.452 info (2816) Currently no devices. zigbee.0 2021-06-26 15:07:11.446 info (2816) --> transmitPower : high zigbee.0 2021-06-26 15:07:11.438 info (2816) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2021-06-26 15:07:09.669 info (2816) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 15:07:09.245 info (2816) Starting Zigbee npm ... zigbee.0 2021-06-26 15:07:08.966 info (2816) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-06-26 15:07:04.816 info instance system.adapter.zigbee.0 started with pid 2816 host.raspberrypi 2021-06-26 15:06:34.773 info Restart adapter system.adapter.zigbee.0 because enabled host.raspberrypi 2021-06-26 15:06:34.771 error instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION) zigbee.0 2021-06-26 15:06:34.011 warn (2775) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-26 15:06:34.008 info (2775) terminating zigbee.0 2021-06-26 15:06:33.509 info (2775) Zigbee: disabling joining new devices. zigbee.0 2021-06-26 15:06:33.506 info (2775) cleaned everything up... zigbee.0 2021-06-26 15:06:33.489 error (2775) Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:06:33.489 error (2775) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:449:36) at processTicksAndRejections (internal/proce zigbee.0 2021-06-26 15:06:33.487 error (2775) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:06:33.486 error (2775) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-26 15:06:11.496 info (2775) Zigbee started zigbee.0 2021-06-26 15:06:11.494 info (2775) Currently no devices. zigbee.0 2021-06-26 15:06:11.488 info (2775) --> transmitPower : high zigbee.0 2021-06-26 15:06:11.480 info (2775) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2021-06-26 15:06:09.636 info (2775) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 15:06:09.206 info (2775) Starting Zigbee npm ... zigbee.0 2021-06-26 15:06:09.002 info (2775) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-06-26 15:06:04.843 info instance system.adapter.zigbee.0 started with pid 2775 host.raspberrypi 2021-06-26 15:05:34.800 info Restart adapter system.adapter.zigbee.0 because enabled host.raspberrypi 2021-06-26 15:05:34.795 error instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION) zigbee.0 2021-06-26 15:05:33.975 warn (2562) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-26 15:05:33.974 info (2562) terminating zigbee.0 2021-06-26 15:05:33.475 info (2562) Zigbee: disabling joining new devices. zigbee.0 2021-06-26 15:05:33.471 info (2562) cleaned everything up... zigbee.0 2021-06-26 15:05:33.435 error (2562) Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:05:33.434 error (2562) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:449:36) at processTicksAndRejections (internal/proce zigbee.0 2021-06-26 15:05:33.433 error (2562) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:05:33.432 error (2562) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-26 15:05:26.334 info (2562) Zigbee: allowing new devices to join.Muss ich da noch was machen? Irgendeinen Patch oder so?
EDIT:
Ich habe jetzt noch mal der Raspberry Update/upgrade gemacht, wenn ich jetzt den Stick über
/dev/serial/by-id/usb-Texas_Instruments_CC2538_USB_CDC-if00laufen lassen möchte,bekome ich im Log:
zigbee.0 2021-06-26 15:27:57.770 error (8583) getGroups: caught error: TypeError: Cannot read property 'getGroups' of undefined zigbee.0 2021-06-26 15:27:55.528 error (8583) Error herdsman start zigbee.0 2021-06-26 15:27:55.528 error (8583) Failed to start Zigbee zigbee.0 2021-06-26 15:27:55.527 error (8583) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" zigbee.0 2021-06-26 15:27:55.320 info (8583) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 15:27:55.296 info (8583) Starting Zigbee npm ... zigbee.0 2021-06-26 15:27:55.294 info (8583) Try to reconnect. 1 attempts left zigbee.0 2021-06-26 15:27:45.293 error (8583) Error herdsman start zigbee.0 2021-06-26 15:27:45.292 error (8583) Failed to start Zigbee zigbee.0 2021-06-26 15:27:45.291 error (8583) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" zigbee.0 2021-06-26 15:27:45.290 error (8583) Re-commissioning your network will require re-pairing of all devices! zigbee.0 2021-06-26 15:27:45.290 error (8583) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. zigbee.0 2021-06-26 15:27:45.290 error (8583) Please update configuration to prevent further issues. zigbee.0 2021-06-26 15:27:45.289 error (8583) - Channel List: configured=11, adapter=13 zigbee.0 2021-06-26 15:27:45.288 error (8583) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d zigbee.0 2021-06-26 15:27:45.288 error (8583) - Extended PAN ID: configured=00124b00042ae9ec, adapter=00124b00042ae9ec zigbee.0 2021-06-26 15:27:45.287 error (8583) - PAN ID: configured=6754, adapter=6754 zigbee.0 2021-06-26 15:27:45.286 error (8583) Configuration is not consistent with adapter state/backup! zigbee.0 2021-06-26 15:27:43.522 info (8583) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 15:27:43.087 info (8583) Starting Zigbee npm ... zigbee.0 2021-06-26 15:27:42.925 info (8583) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-06-26 15:27:38.564 info instance system.adapter.zigbee.0 started with pid 8583 host.raspberrypi 2021-06-26 15:27:36.249 info instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) host.raspberrypi 2021-06-26 15:27:35.512 info stopInstance system.adapter.zigbee.0 send kill signal zigbee.0 2021-06-26 15:27:35.479 error (8386) Cannot read property 'getEntries' of null zigbee.0 2021-06-26 15:27:35.479 error (8386) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55) at Funct zigbee.0 2021-06-26 15:27:35.477 error (8386) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-26 15:27:35.477 error (8386) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-26 15:27:35.471 info (8386) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2021-06-26 15:27:35.470 info (8386) terminating zigbee.0 2021-06-26 15:27:35.469 warn (8386) Failed to stop zigbee during startup zigbee.0 2021-06-26 15:27:35.467 info (8386) Zigbee: disabling joining new devices. zigbee.0 2021-06-26 15:27:35.463 info (8386) cleaned everything up... zigbee.0 2021-06-26 15:27:35.461 info (8386) Got terminate signal TERMINATE_YOURSELF host.raspberrypi 2021-06-26 15:27:35.446 info stopInstance system.adapter.zigbee.0 (force=false, process=true) -
@arteck
Ich habe heute meinen CC2538 bekommen. Einmal die Sticks getauscht und den neuen Serial Port gesucht, eingestellt und los....
Leider läuft das nicht.
Ich habe es erst mitls -la /dev/serial/by-id total 0 drwxr-xr-x 2 root root 80 Jun 26 15:03 . drwxr-xr-x 4 root root 80 Jun 26 14:56 .. lrwxrwxrwx 1 root root 13 Jun 26 14:56 usb-FTDI_FT232R_USB_UART_AQ001XTW-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 Jun 26 15:03 usb-Texas_Instruments_CC2538_USB_CDC-if00 -> ../../ttyACM0probiert, später dann noch mal mit ttyACM0 , aber ich bekomme ich die Logmeldungen...
host.raspberrypi 2021-06-26 15:07:34.834 warn Do not restart adapter system.adapter.zigbee.0 because restart loop detected host.raspberrypi 2021-06-26 15:07:34.834 info Restart adapter system.adapter.zigbee.0 because enabled host.raspberrypi 2021-06-26 15:07:34.833 error instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION) zigbee.0 2021-06-26 15:07:34.017 warn (2816) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-26 15:07:34.015 info (2816) terminating zigbee.0 2021-06-26 15:07:33.499 info (2816) Zigbee: disabling joining new devices. zigbee.0 2021-06-26 15:07:33.496 info (2816) cleaned everything up... zigbee.0 2021-06-26 15:07:33.471 error (2816) Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:07:33.470 error (2816) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:449:36) at processTicksAndRejections (internal/proce zigbee.0 2021-06-26 15:07:33.469 error (2816) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:07:33.468 error (2816) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-26 15:07:11.454 info (2816) Zigbee started zigbee.0 2021-06-26 15:07:11.452 info (2816) Currently no devices. zigbee.0 2021-06-26 15:07:11.446 info (2816) --> transmitPower : high zigbee.0 2021-06-26 15:07:11.438 info (2816) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2021-06-26 15:07:09.669 info (2816) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 15:07:09.245 info (2816) Starting Zigbee npm ... zigbee.0 2021-06-26 15:07:08.966 info (2816) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-06-26 15:07:04.816 info instance system.adapter.zigbee.0 started with pid 2816 host.raspberrypi 2021-06-26 15:06:34.773 info Restart adapter system.adapter.zigbee.0 because enabled host.raspberrypi 2021-06-26 15:06:34.771 error instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION) zigbee.0 2021-06-26 15:06:34.011 warn (2775) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-26 15:06:34.008 info (2775) terminating zigbee.0 2021-06-26 15:06:33.509 info (2775) Zigbee: disabling joining new devices. zigbee.0 2021-06-26 15:06:33.506 info (2775) cleaned everything up... zigbee.0 2021-06-26 15:06:33.489 error (2775) Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:06:33.489 error (2775) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:449:36) at processTicksAndRejections (internal/proce zigbee.0 2021-06-26 15:06:33.487 error (2775) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:06:33.486 error (2775) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-26 15:06:11.496 info (2775) Zigbee started zigbee.0 2021-06-26 15:06:11.494 info (2775) Currently no devices. zigbee.0 2021-06-26 15:06:11.488 info (2775) --> transmitPower : high zigbee.0 2021-06-26 15:06:11.480 info (2775) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2021-06-26 15:06:09.636 info (2775) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 15:06:09.206 info (2775) Starting Zigbee npm ... zigbee.0 2021-06-26 15:06:09.002 info (2775) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-06-26 15:06:04.843 info instance system.adapter.zigbee.0 started with pid 2775 host.raspberrypi 2021-06-26 15:05:34.800 info Restart adapter system.adapter.zigbee.0 because enabled host.raspberrypi 2021-06-26 15:05:34.795 error instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION) zigbee.0 2021-06-26 15:05:33.975 warn (2562) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-26 15:05:33.974 info (2562) terminating zigbee.0 2021-06-26 15:05:33.475 info (2562) Zigbee: disabling joining new devices. zigbee.0 2021-06-26 15:05:33.471 info (2562) cleaned everything up... zigbee.0 2021-06-26 15:05:33.435 error (2562) Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:05:33.434 error (2562) TypeError: Cannot read property 'mapped' of undefined at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:449:36) at processTicksAndRejections (internal/proce zigbee.0 2021-06-26 15:05:33.433 error (2562) unhandled promise rejection: Cannot read property 'mapped' of undefined zigbee.0 2021-06-26 15:05:33.432 error (2562) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-26 15:05:26.334 info (2562) Zigbee: allowing new devices to join.Muss ich da noch was machen? Irgendeinen Patch oder so?
EDIT:
Ich habe jetzt noch mal der Raspberry Update/upgrade gemacht, wenn ich jetzt den Stick über
/dev/serial/by-id/usb-Texas_Instruments_CC2538_USB_CDC-if00laufen lassen möchte,bekome ich im Log:
zigbee.0 2021-06-26 15:27:57.770 error (8583) getGroups: caught error: TypeError: Cannot read property 'getGroups' of undefined zigbee.0 2021-06-26 15:27:55.528 error (8583) Error herdsman start zigbee.0 2021-06-26 15:27:55.528 error (8583) Failed to start Zigbee zigbee.0 2021-06-26 15:27:55.527 error (8583) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" zigbee.0 2021-06-26 15:27:55.320 info (8583) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 15:27:55.296 info (8583) Starting Zigbee npm ... zigbee.0 2021-06-26 15:27:55.294 info (8583) Try to reconnect. 1 attempts left zigbee.0 2021-06-26 15:27:45.293 error (8583) Error herdsman start zigbee.0 2021-06-26 15:27:45.292 error (8583) Failed to start Zigbee zigbee.0 2021-06-26 15:27:45.291 error (8583) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" zigbee.0 2021-06-26 15:27:45.290 error (8583) Re-commissioning your network will require re-pairing of all devices! zigbee.0 2021-06-26 15:27:45.290 error (8583) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. zigbee.0 2021-06-26 15:27:45.290 error (8583) Please update configuration to prevent further issues. zigbee.0 2021-06-26 15:27:45.289 error (8583) - Channel List: configured=11, adapter=13 zigbee.0 2021-06-26 15:27:45.288 error (8583) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d zigbee.0 2021-06-26 15:27:45.288 error (8583) - Extended PAN ID: configured=00124b00042ae9ec, adapter=00124b00042ae9ec zigbee.0 2021-06-26 15:27:45.287 error (8583) - PAN ID: configured=6754, adapter=6754 zigbee.0 2021-06-26 15:27:45.286 error (8583) Configuration is not consistent with adapter state/backup! zigbee.0 2021-06-26 15:27:43.522 info (8583) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 15:27:43.087 info (8583) Starting Zigbee npm ... zigbee.0 2021-06-26 15:27:42.925 info (8583) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-06-26 15:27:38.564 info instance system.adapter.zigbee.0 started with pid 8583 host.raspberrypi 2021-06-26 15:27:36.249 info instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) host.raspberrypi 2021-06-26 15:27:35.512 info stopInstance system.adapter.zigbee.0 send kill signal zigbee.0 2021-06-26 15:27:35.479 error (8386) Cannot read property 'getEntries' of null zigbee.0 2021-06-26 15:27:35.479 error (8386) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55) at Funct zigbee.0 2021-06-26 15:27:35.477 error (8386) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-26 15:27:35.477 error (8386) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-26 15:27:35.471 info (8386) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2021-06-26 15:27:35.470 info (8386) terminating zigbee.0 2021-06-26 15:27:35.469 warn (8386) Failed to stop zigbee during startup zigbee.0 2021-06-26 15:27:35.467 info (8386) Zigbee: disabling joining new devices. zigbee.0 2021-06-26 15:27:35.463 info (8386) cleaned everything up... zigbee.0 2021-06-26 15:27:35.461 info (8386) Got terminate signal TERMINATE_YOURSELF host.raspberrypi 2021-06-26 15:27:35.446 info stopInstance system.adapter.zigbee.0 (force=false, process=true)Habe malprobiert was über den Serial fehler zu finden.
pi@raspberrypi:~ $ ls -la /dev/serial/by-id total 0 drwxr-xr-x 2 root root 80 Jun 26 16:20 . drwxr-xr-x 4 root root 80 Jun 26 16:19 .. lrwxrwxrwx 1 root root 13 Jun 26 16:19 usb-Texas_Instruments_CC2538_USB_CDC-if00 -> ../../ttyACM0 lrwxrwxrwx 1 root root 13 Jun 26 16:20 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001938CB58-if00 -> ../../ttyACM1pi@raspberrypi:~ $ ls -l /proc/[0-9]/fd/ |grep /dev/ttyACM0 ls: cannot open directory '/proc/1/fd/': Permission denied ls: cannot open directory '/proc/2/fd/': Permission denied ls: cannot open directory '/proc/3/fd/': Permission denied ls: cannot open directory '/proc/4/fd/': Permission denied ls: cannot open directory '/proc/6/fd/': Permission denied ls: cannot open directory '/proc/8/fd/': Permission denied ls: cannot open directory '/proc/9/fd/': Permission deniedwenn ich jetzt den alten CC2531 zusätzlich einstecke läuft alles, bzw swe Adapter wird grün.
mit dem CC2538 Stick, geht es nicht.
Ich verstehe das alles nicht . -
Habe malprobiert was über den Serial fehler zu finden.
pi@raspberrypi:~ $ ls -la /dev/serial/by-id total 0 drwxr-xr-x 2 root root 80 Jun 26 16:20 . drwxr-xr-x 4 root root 80 Jun 26 16:19 .. lrwxrwxrwx 1 root root 13 Jun 26 16:19 usb-Texas_Instruments_CC2538_USB_CDC-if00 -> ../../ttyACM0 lrwxrwxrwx 1 root root 13 Jun 26 16:20 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001938CB58-if00 -> ../../ttyACM1pi@raspberrypi:~ $ ls -l /proc/[0-9]/fd/ |grep /dev/ttyACM0 ls: cannot open directory '/proc/1/fd/': Permission denied ls: cannot open directory '/proc/2/fd/': Permission denied ls: cannot open directory '/proc/3/fd/': Permission denied ls: cannot open directory '/proc/4/fd/': Permission denied ls: cannot open directory '/proc/6/fd/': Permission denied ls: cannot open directory '/proc/8/fd/': Permission denied ls: cannot open directory '/proc/9/fd/': Permission deniedwenn ich jetzt den alten CC2531 zusätzlich einstecke läuft alles, bzw swe Adapter wird grün.
mit dem CC2538 Stick, geht es nicht.
Ich verstehe das alles nicht .@atomicix du hast einen kondigurationsfehler.
Bisher hast du den Adapter auf Kanal 13 laufen gehabt, jetzt versuchst du es auf Kanal 11. Das geht nicht.
A.
ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
"Shit don't work" ist keine Fehlermeldung, sondern ein Fluch. -
@atomicix du hast einen kondigurationsfehler.
Bisher hast du den Adapter auf Kanal 13 laufen gehabt, jetzt versuchst du es auf Kanal 11. Das geht nicht.
A.
@asgothian
okay,ja stimmt, hatte rumprobiert. Jetzt ist er wieder auf 11.zigbee.0 2021-06-26 17:10:34.396 error (10194) Error herdsman start zigbee.0 2021-06-26 17:10:34.395 error (10194) Failed to start Zigbee zigbee.0 2021-06-26 17:10:34.395 error (10194) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" zigbee.0 2021-06-26 17:10:34.167 info (10194) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 17:10:34.141 info (10194) Starting Zigbee npm ... zigbee.0 2021-06-26 17:10:34.140 info (10194) Try to reconnect. 1 attempts left zigbee.0 2021-06-26 17:10:24.139 error (10194) Error herdsman start zigbee.0 2021-06-26 17:10:24.138 error (10194) Failed to start Zigbee zigbee.0 2021-06-26 17:10:24.138 error (10194) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" zigbee.0 2021-06-26 17:10:24.137 error (10194) Re-commissioning your network will require re-pairing of all devices! zigbee.0 2021-06-26 17:10:24.136 error (10194) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. zigbee.0 2021-06-26 17:10:24.136 error (10194) Please update configuration to prevent further issues. zigbee.0 2021-06-26 17:10:24.135 error (10194) - Channel List: configured=11, adapter=11 zigbee.0 2021-06-26 17:10:24.135 error (10194) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d zigbee.0 2021-06-26 17:10:24.134 error (10194) - Extended PAN ID: configured=00124b00042ae9ec, adapter=00124b00042ae9ec zigbee.0 2021-06-26 17:10:24.133 error (10194) - PAN ID: configured=6754, adapter=6755 zigbee.0 2021-06-26 17:10:24.132 error (10194) Configuration is not consistent with adapter state/backup! zigbee.0 2021-06-26 17:10:22.351 info (10194) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 17:10:21.930 info (10194) Starting Zigbee npm ... zigbee.0 2021-06-26 17:10:21.777 info (10194) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-06-26 17:10:17.420 info instance system.adapter.zigbee.0 started with pid 10194 host.raspberrypi 2021-06-26 17:10:15.117 info instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) zigbee.0 2021-06-26 17:10:14.411 error (9998) Cannot read property 'getEntries' of null zigbee.0 2021-06-26 17:10:14.410 error (9998) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55) at Funct zigbee.0 2021-06-26 17:10:14.409 error (9998) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-26 17:10:14.408 error (9998) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-26 17:10:14.406 info (9998) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2021-06-26 17:10:14.405 info (9998) terminatingStartet aber trotzdem nicht.
-
@asgothian
okay,ja stimmt, hatte rumprobiert. Jetzt ist er wieder auf 11.zigbee.0 2021-06-26 17:10:34.396 error (10194) Error herdsman start zigbee.0 2021-06-26 17:10:34.395 error (10194) Failed to start Zigbee zigbee.0 2021-06-26 17:10:34.395 error (10194) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" zigbee.0 2021-06-26 17:10:34.167 info (10194) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 17:10:34.141 info (10194) Starting Zigbee npm ... zigbee.0 2021-06-26 17:10:34.140 info (10194) Try to reconnect. 1 attempts left zigbee.0 2021-06-26 17:10:24.139 error (10194) Error herdsman start zigbee.0 2021-06-26 17:10:24.138 error (10194) Failed to start Zigbee zigbee.0 2021-06-26 17:10:24.138 error (10194) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" zigbee.0 2021-06-26 17:10:24.137 error (10194) Re-commissioning your network will require re-pairing of all devices! zigbee.0 2021-06-26 17:10:24.136 error (10194) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. zigbee.0 2021-06-26 17:10:24.136 error (10194) Please update configuration to prevent further issues. zigbee.0 2021-06-26 17:10:24.135 error (10194) - Channel List: configured=11, adapter=11 zigbee.0 2021-06-26 17:10:24.135 error (10194) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d zigbee.0 2021-06-26 17:10:24.134 error (10194) - Extended PAN ID: configured=00124b00042ae9ec, adapter=00124b00042ae9ec zigbee.0 2021-06-26 17:10:24.133 error (10194) - PAN ID: configured=6754, adapter=6755 zigbee.0 2021-06-26 17:10:24.132 error (10194) Configuration is not consistent with adapter state/backup! zigbee.0 2021-06-26 17:10:22.351 info (10194) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 17:10:21.930 info (10194) Starting Zigbee npm ... zigbee.0 2021-06-26 17:10:21.777 info (10194) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-06-26 17:10:17.420 info instance system.adapter.zigbee.0 started with pid 10194 host.raspberrypi 2021-06-26 17:10:15.117 info instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) zigbee.0 2021-06-26 17:10:14.411 error (9998) Cannot read property 'getEntries' of null zigbee.0 2021-06-26 17:10:14.410 error (9998) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55) at Funct zigbee.0 2021-06-26 17:10:14.409 error (9998) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-26 17:10:14.408 error (9998) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-26 17:10:14.406 info (9998) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2021-06-26 17:10:14.405 info (9998) terminatingStartet aber trotzdem nicht.
@atomicix
Manchmal frag ich mich echt ob ich der einzuige bei der die logs liest. Das problem steht im log eindeutig drin:Du hast jetzt eine andere PANID (6754 statt 6755).
Damit wird der Start verweigert.
Bitte spiel eine der gesicherten nvbackup.JSON Dateien zurück die noch Die korrekte pan id haben oder trag bei dir 6754 ein.
A.
ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
"Shit don't work" ist keine Fehlermeldung, sondern ein Fluch. -
@atomicix
Manchmal frag ich mich echt ob ich der einzuige bei der die logs liest. Das problem steht im log eindeutig drin:Du hast jetzt eine andere PANID (6754 statt 6755).
Damit wird der Start verweigert.
Bitte spiel eine der gesicherten nvbackup.JSON Dateien zurück die noch Die korrekte pan id haben oder trag bei dir 6754 ein.
A.
@asgothian sagte in Zigbee Geräte reagieren plötzlich nicht mehr.:
6755
Danke, habe jetzt auf 6755 geändert und es läuft.
Ich weis nicht wofür die Einstellungen sind, und änder sowas dann normalerweise dann auch nicht.
Ich habe mich irgendwie im Log auf den Serial Fehler eingeschossen.
Vielen dank,jetzt kann ich meine Geräte anlernen und habe mit glück, heute abend wieder Licht. -
@asgothian sagte in Zigbee Geräte reagieren plötzlich nicht mehr.:
6755
Danke, habe jetzt auf 6755 geändert und es läuft.
Ich weis nicht wofür die Einstellungen sind, und änder sowas dann normalerweise dann auch nicht.
Ich habe mich irgendwie im Log auf den Serial Fehler eingeschossen.
Vielen dank,jetzt kann ich meine Geräte anlernen und habe mit glück, heute abend wieder Licht.@atomicix
Der serielle Fehler war ein geisterfehler.Das sind sie zu 99.9% wenn es heißt “cannot lock port”
A.
ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
"Shit don't work" ist keine Fehlermeldung, sondern ein Fluch. -
@atomicix
Der serielle Fehler war ein geisterfehler.Das sind sie zu 99.9% wenn es heißt “cannot lock port”
A.
@asgothian
jetzt habe ich meine erste Lampe angelernt, aber die schaltet verzögert mit ca. 10 sek.
Zusätlich habe ich noch alle Geräte in der Liste, die aber nicht gepart sind. Ein Hardreset hat auch nichts gebracht.Im Log habe ich das:
zigbee.0 2021-06-26 17:46:12.622 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:45:12.520 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:44:55.830 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:44:35.742 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:44:16.171 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:43:56.740 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:43:29.620 info (13260) Zigbee: stop joining zigbee.0 2021-06-26 17:43:12.782 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:42:48.139 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:42:28.396 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:42:18.238 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:41:52.924 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:41:28.312 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:41:21.269 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:41:08.139 warn (13260) Failed to ping 0x00124b001b349be6 GL-C-007 zigbee.0 2021-06-26 17:41:07.480 warn (13260) Failed to ping 0x842e14fffe46dcdc FLOALT panel WS 30x30 zigbee.0 2021-06-26 17:41:06.667 warn (13260) Failed to ping 0xccccccfffe61f708 TRADFRI bulb E27 WW clear 250lm zigbee.0 2021-06-26 17:41:06.060 warn (13260) Failed to ping 0x847127fffeccff38 TRADFRI bulb E27 WS opal 1000lm zigbee.0 2021-06-26 17:41:05.311 warn (13260) Failed to ping 0x588e81fffe11cddc TRADFRI bulb E27 WS opal 1000lm zigbee.0 2021-06-26 17:41:04.477 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:40:44.627 warn (13260) Failed to ping 0xbc33acfffe1a3810 TRADFRI bulb E27 WW clear 250lm zigbee.0 2021-06-26 17:40:44.015 warn (13260) Failed to ping 0xec1bbdfffe2c3d36 TRADFRI bulb E27 WS opal 1000lm sonoff.0 2021-06-26 17:40:26.924 info (9512) Client [Grundwasser-Leuchtturm] connected with secret 1624722026924_232 zigbee.0 2021-06-26 17:40:14.385 info (13260) Zigbee: allowing new devices to join. zigbee.0 2021-06-26 17:40:10.510 warn (13260) Device '0x842e14fffe45b0fe' announced itself sonoff.0 2021-06-26 17:40:09.736 info (9512) Client [Grundwasser-Leuchtturm] connection closed: closed zigbee.0 2021-06-26 17:40:08.779 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:40:06.942 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:40:05.291 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:40:03.613 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:40:02.153 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:39:44.819 warn (13260) Failed to ping 0x680ae2fffe8dd4df TRADFRI Signal Repeater zigbee.0 2021-06-26 17:39:26.199 warn (13260) Failed to ping 0x680ae2fffe923f00 TRADFRI Signal Repeater zigbee.0 2021-06-26 17:39:25.649 warn (13260) Failed to ping 0x680ae2fffe91cc40 TRADFRI Signal Repeater zigbee.0 2021-06-26 17:39:24.804 warn (13260) Failed to ping 0x000d6ffffe8e9517 TRADFRI signal repeater zigbee.0 2021-06-26 17:39:23.958 info (13260) Zigbee started zigbee.0 2021-06-26 17:39:23.955 info (13260) 0x00158d0002bf93de (addr 23508): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.953 info (13260) 0x00158d00067c07c4 (addr 17540): WXKG11LM - Xiaomi Aqara wireless switch (EndDevice) zigbee.0 2021-06-26 17:39:23.950 info (13260) 0x680ae2fffea16411 (addr 22111): E1524/E1810 - IKEA TRADFRI remote control (EndDevice) zigbee.0 2021-06-26 17:39:23.948 info (13260) 0x00124b001b349be6 (addr 34647): GL-C-007-1ID - Gledopto Zigbee LED Controller RGBW (1 ID) (Router) zigbee.0 2021-06-26 17:39:23.945 info (13260) 0x00158d00042cf578 (addr 37730): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.944 info (13260) 0x00158d00049de426 (addr 15592): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.942 info (13260) 0x00158d000482d29e (addr 31375): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.940 info (13260) 0x842e14fffe45b0fe (addr 46466): L1527 - IKEA FLOALT LED light panel, dimmable, white spectrum (30x30 cm) (Router) zigbee.0 2021-06-26 17:39:23.938 info (13260) 0x842e14fffe46dcdc (addr 12145): L1527 - IKEA FLOALT LED light panel, dimmable, white spectrum (30x30 cm) (Router) zigbee.0 2021-06-26 17:39:23.936 info (13260) 0xec1bbdfffea3bda3 (addr 35615): E1524/E1810 - IKEA TRADFRI remote control (EndDevice) zigbee.0 2021-06-26 17:39:23.934 info (13260) 0x00158d0002c8dc47 (addr 20613): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.932 info (13260) 0xccccccfffe61f708 (addr 34629): LED1842G3 - IKEA TRADFRI LED bulb E27 WW clear 250 lumen, dimmable (Router) zigbee.0 2021-06-26 17:39:23.930 info (13260) 0x00158d000578de3c (addr 34827): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.929 info (13260) 0x847127fffeccff38 (addr 30684): LED1732G11 - IKEA TRADFRI LED bulb E27 1000 lumen, dimmable, white spectrum, opal white (Router) zigbee.0 2021-06-26 17:39:23.927 info (13260) 0x588e81fffe11cddc (addr 46175): LED1732G11 - IKEA TRADFRI LED bulb E27 1000 lumen, dimmable, white spectrum, opal white (Router) zigbee.0 2021-06-26 17:39:23.924 info (13260) 0x680ae2fffe8dd4df (addr 42567): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2021-06-26 17:39:23.923 info (13260) 0x00158d0002c7d3c2 (addr 20300): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.921 info (13260) 0x000d6ffffe7a2ca5 (addr 32247): E1524/E1810 - IKEA TRADFRI remote control (EndDevice) zigbee.0 2021-06-26 17:39:23.920 info (13260) 0xbc33acfffe1a3810 (addr 19681): LED1842G3 - IKEA TRADFRI LED bulb E27 WW clear 250 lumen, dimmable (Router) zigbee.0 2021-06-26 17:39:23.918 info (13260) 0x680ae2fffe923f00 (addr 23435): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2021-06-26 17:39:23.917 info (13260) 0x00158d0002e20bc4 (addr 45635): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.915 info (13260) 0x00158d0002c0d109 (addr 45886): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.913 info (13260) 0x00158d0002bf93d0 (addr 16852): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.911 info (13260) 0x680ae2fffe83ad19 (addr 64299): E1524/E1810 - IKEA TRADFRI remote control (EndDevice) zigbee.0 2021-06-26 17:39:23.908 info (13260) 0x680ae2fffe91cc40 (addr 8691): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2021-06-26 17:39:23.907 info (13260) 0x00158d0004183d3f (addr 52229): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.904 info (13260) 0x00158d0002c99dc6 (addr 2119): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.903 info (13260) 0x00158d00047ea54b (addr 6991): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.901 info (13260) 0xec1bbdfffe2c3d36 (addr 48993): LED1732G11 - IKEA TRADFRI LED bulb E27 1000 lumen, dimmable, white spectrum, opal white (Router) zigbee.0 2021-06-26 17:39:23.897 info (13260) 0x000d6ffffe8e9517 (addr 28387): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2021-06-26 17:39:23.895 info (13260) 0x00158d0002c99d2a (addr 61713): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.888 info (13260) 0x00158d0002c8e613 (addr 59251): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.728 info (13260) Currently 32 devices are joined: zigbee.0 2021-06-26 17:39:23.718 info (13260) --> transmitPower : high zigbee.0 2021-06-26 17:39:23.711 info (13260) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2021-06-26 17:39:21.857 info (13260) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 17:39:21.424 info (13260) Starting Zigbee npm ... zigbee.0 2021-06-26 17:39:21.262 info (13260) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-06-26 17:39:17.328 info instance system.adapter.zigbee.0 started with pid 13260 host.raspberrypi 2021-06-26 17:39:15.437 info instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) host.raspberrypi 2021-06-26 17:39:15.291 info stopInstance system.adapter.zigbee.0 killing pid 13043 zigbee.0 2021-06-26 17:39:14.789 info (13043) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2021-06-26 17:39:14.788 info (13043) terminatingEDIT: Jetzt scheint es zu laufen.
-
@asgothian
jetzt habe ich meine erste Lampe angelernt, aber die schaltet verzögert mit ca. 10 sek.
Zusätlich habe ich noch alle Geräte in der Liste, die aber nicht gepart sind. Ein Hardreset hat auch nichts gebracht.Im Log habe ich das:
zigbee.0 2021-06-26 17:46:12.622 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:45:12.520 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:44:55.830 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:44:35.742 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:44:16.171 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:43:56.740 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:43:29.620 info (13260) Zigbee: stop joining zigbee.0 2021-06-26 17:43:12.782 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:42:48.139 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:42:28.396 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:42:18.238 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:41:52.924 warn (13260) Send command to 0x842e14fffe46dcdc failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:41:28.312 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:41:21.269 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:41:08.139 warn (13260) Failed to ping 0x00124b001b349be6 GL-C-007 zigbee.0 2021-06-26 17:41:07.480 warn (13260) Failed to ping 0x842e14fffe46dcdc FLOALT panel WS 30x30 zigbee.0 2021-06-26 17:41:06.667 warn (13260) Failed to ping 0xccccccfffe61f708 TRADFRI bulb E27 WW clear 250lm zigbee.0 2021-06-26 17:41:06.060 warn (13260) Failed to ping 0x847127fffeccff38 TRADFRI bulb E27 WS opal 1000lm zigbee.0 2021-06-26 17:41:05.311 warn (13260) Failed to ping 0x588e81fffe11cddc TRADFRI bulb E27 WS opal 1000lm zigbee.0 2021-06-26 17:41:04.477 warn (13260) Send command to 0xec1bbdfffe2c3d36 failed with: Code 205 (No network route) zigbee.0 2021-06-26 17:40:44.627 warn (13260) Failed to ping 0xbc33acfffe1a3810 TRADFRI bulb E27 WW clear 250lm zigbee.0 2021-06-26 17:40:44.015 warn (13260) Failed to ping 0xec1bbdfffe2c3d36 TRADFRI bulb E27 WS opal 1000lm sonoff.0 2021-06-26 17:40:26.924 info (9512) Client [Grundwasser-Leuchtturm] connected with secret 1624722026924_232 zigbee.0 2021-06-26 17:40:14.385 info (13260) Zigbee: allowing new devices to join. zigbee.0 2021-06-26 17:40:10.510 warn (13260) Device '0x842e14fffe45b0fe' announced itself sonoff.0 2021-06-26 17:40:09.736 info (9512) Client [Grundwasser-Leuchtturm] connection closed: closed zigbee.0 2021-06-26 17:40:08.779 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:40:06.942 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:40:05.291 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:40:03.613 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:40:02.153 warn (13260) Device '0x842e14fffe45b0fe' announced itself zigbee.0 2021-06-26 17:39:44.819 warn (13260) Failed to ping 0x680ae2fffe8dd4df TRADFRI Signal Repeater zigbee.0 2021-06-26 17:39:26.199 warn (13260) Failed to ping 0x680ae2fffe923f00 TRADFRI Signal Repeater zigbee.0 2021-06-26 17:39:25.649 warn (13260) Failed to ping 0x680ae2fffe91cc40 TRADFRI Signal Repeater zigbee.0 2021-06-26 17:39:24.804 warn (13260) Failed to ping 0x000d6ffffe8e9517 TRADFRI signal repeater zigbee.0 2021-06-26 17:39:23.958 info (13260) Zigbee started zigbee.0 2021-06-26 17:39:23.955 info (13260) 0x00158d0002bf93de (addr 23508): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.953 info (13260) 0x00158d00067c07c4 (addr 17540): WXKG11LM - Xiaomi Aqara wireless switch (EndDevice) zigbee.0 2021-06-26 17:39:23.950 info (13260) 0x680ae2fffea16411 (addr 22111): E1524/E1810 - IKEA TRADFRI remote control (EndDevice) zigbee.0 2021-06-26 17:39:23.948 info (13260) 0x00124b001b349be6 (addr 34647): GL-C-007-1ID - Gledopto Zigbee LED Controller RGBW (1 ID) (Router) zigbee.0 2021-06-26 17:39:23.945 info (13260) 0x00158d00042cf578 (addr 37730): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.944 info (13260) 0x00158d00049de426 (addr 15592): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.942 info (13260) 0x00158d000482d29e (addr 31375): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.940 info (13260) 0x842e14fffe45b0fe (addr 46466): L1527 - IKEA FLOALT LED light panel, dimmable, white spectrum (30x30 cm) (Router) zigbee.0 2021-06-26 17:39:23.938 info (13260) 0x842e14fffe46dcdc (addr 12145): L1527 - IKEA FLOALT LED light panel, dimmable, white spectrum (30x30 cm) (Router) zigbee.0 2021-06-26 17:39:23.936 info (13260) 0xec1bbdfffea3bda3 (addr 35615): E1524/E1810 - IKEA TRADFRI remote control (EndDevice) zigbee.0 2021-06-26 17:39:23.934 info (13260) 0x00158d0002c8dc47 (addr 20613): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.932 info (13260) 0xccccccfffe61f708 (addr 34629): LED1842G3 - IKEA TRADFRI LED bulb E27 WW clear 250 lumen, dimmable (Router) zigbee.0 2021-06-26 17:39:23.930 info (13260) 0x00158d000578de3c (addr 34827): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.929 info (13260) 0x847127fffeccff38 (addr 30684): LED1732G11 - IKEA TRADFRI LED bulb E27 1000 lumen, dimmable, white spectrum, opal white (Router) zigbee.0 2021-06-26 17:39:23.927 info (13260) 0x588e81fffe11cddc (addr 46175): LED1732G11 - IKEA TRADFRI LED bulb E27 1000 lumen, dimmable, white spectrum, opal white (Router) zigbee.0 2021-06-26 17:39:23.924 info (13260) 0x680ae2fffe8dd4df (addr 42567): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2021-06-26 17:39:23.923 info (13260) 0x00158d0002c7d3c2 (addr 20300): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.921 info (13260) 0x000d6ffffe7a2ca5 (addr 32247): E1524/E1810 - IKEA TRADFRI remote control (EndDevice) zigbee.0 2021-06-26 17:39:23.920 info (13260) 0xbc33acfffe1a3810 (addr 19681): LED1842G3 - IKEA TRADFRI LED bulb E27 WW clear 250 lumen, dimmable (Router) zigbee.0 2021-06-26 17:39:23.918 info (13260) 0x680ae2fffe923f00 (addr 23435): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2021-06-26 17:39:23.917 info (13260) 0x00158d0002e20bc4 (addr 45635): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.915 info (13260) 0x00158d0002c0d109 (addr 45886): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.913 info (13260) 0x00158d0002bf93d0 (addr 16852): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.911 info (13260) 0x680ae2fffe83ad19 (addr 64299): E1524/E1810 - IKEA TRADFRI remote control (EndDevice) zigbee.0 2021-06-26 17:39:23.908 info (13260) 0x680ae2fffe91cc40 (addr 8691): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2021-06-26 17:39:23.907 info (13260) 0x00158d0004183d3f (addr 52229): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.904 info (13260) 0x00158d0002c99dc6 (addr 2119): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.903 info (13260) 0x00158d00047ea54b (addr 6991): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.901 info (13260) 0xec1bbdfffe2c3d36 (addr 48993): LED1732G11 - IKEA TRADFRI LED bulb E27 1000 lumen, dimmable, white spectrum, opal white (Router) zigbee.0 2021-06-26 17:39:23.897 info (13260) 0x000d6ffffe8e9517 (addr 28387): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2021-06-26 17:39:23.895 info (13260) 0x00158d0002c99d2a (addr 61713): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.888 info (13260) 0x00158d0002c8e613 (addr 59251): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2021-06-26 17:39:23.728 info (13260) Currently 32 devices are joined: zigbee.0 2021-06-26 17:39:23.718 info (13260) --> transmitPower : high zigbee.0 2021-06-26 17:39:23.711 info (13260) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20201010}} zigbee.0 2021-06-26 17:39:21.857 info (13260) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-26 17:39:21.424 info (13260) Starting Zigbee npm ... zigbee.0 2021-06-26 17:39:21.262 info (13260) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-06-26 17:39:17.328 info instance system.adapter.zigbee.0 started with pid 13260 host.raspberrypi 2021-06-26 17:39:15.437 info instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) host.raspberrypi 2021-06-26 17:39:15.291 info stopInstance system.adapter.zigbee.0 killing pid 13043 zigbee.0 2021-06-26 17:39:14.789 info (13043) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2021-06-26 17:39:14.788 info (13043) terminatingEDIT: Jetzt scheint es zu laufen.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden482
Online32.9k
Benutzer83.0k
Themen1.3m
Beiträge