NEWS
Diskussion zum HowTo nodejs-Installation und upgrade
ioBroker Allgemein
844
Beiträge
91
Kommentatoren
233.4k
Aufrufe
63
Watching
-
@Thomas-Braun sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
@Habedere Und die Frage ist?
Ich würde allerdings node12 installieren, nicht node14. Die war bei mir auch nur zufällig aktiv, als ich die Anleitung geschrieben habe.Deiner Antwort nach scheint mein Zitat bzw. Wiederholung deiner Beschreibung korrekt zu sein.
Dann probier ich das gleich malpi@ioBroker-RasPi:~ $ sudo rm /usr/local/bin/node pi@ioBroker-RasPi:~ $ sudo rm /usr/local/bin/npm pi@ioBroker-RasPi:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v14.11.0 /usr/bin/node v14.11.0 /usr/bin/npm 6.14.8 nodejs: Installiert: 14.11.0-1nodesource1 Installationskandidat: 14.13.0-1nodesource1 Versionstabelle: 14.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_14.x stretch/main armhf Packages *** 14.11.0-1nodesource1 100 100 /var/lib/dpkg/status 8.11.1~dfsg-2~bpo9+1 500 500 http://archive.raspberrypi.org/debian stretch/main armhf Packages 4.8.2~dfsg-1 500 500 http://raspbian.raspberrypi.org/raspbian stretch/main armhf PackagesHmm das ging ja easy - was mach ich mir auch ins Hemd^^
14er Version ist jetzt schon drauf - soll ich ein Downgrade auf 12 durchführen oder "lohnt" sich der Aufwand nur bei einer Neuinstallation? Bzw. zum Beispiel beim Update des OrangePi
@Habedere
Ja, die im 'falschen' Pfad befindlichen Versionen müssen da weg. Sonst bleiben die da immer stehen. Das ist nämlich bei dir gerade der Fall. Du hast über den Paketmanager apt node14 reingeholt, die zuvor 'irgendwie' installierte 12er-Version steht fix im Pfad /usr/local/bin
Da hat die aber nix zu suchen.
Erklärung: Wenn node von Programmen aufgerufen wird, dann sucht das System in den folgenden Pfaden nach der entsprechenden Datei:echo $PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/gameNach dem ersten Treffer (bei dir in /usr/local/bin) sucht das System nicht mehr weiter.
Ich würde wie gesagt node12 empfehlen, bei node14 kann da noch die ein oder andere Stolperfalle lauern. Ein Downgrade ist ja mit der obigen Anleitung auch easy getan.
-
@Habedere
Ja, die im 'falschen' Pfad befindlichen Versionen müssen da weg. Sonst bleiben die da immer stehen. Das ist nämlich bei dir gerade der Fall. Du hast über den Paketmanager apt node14 reingeholt, die zuvor 'irgendwie' installierte 12er-Version steht fix im Pfad /usr/local/bin
Da hat die aber nix zu suchen.
Erklärung: Wenn node von Programmen aufgerufen wird, dann sucht das System in den folgenden Pfaden nach der entsprechenden Datei:echo $PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/gameNach dem ersten Treffer (bei dir in /usr/local/bin) sucht das System nicht mehr weiter.
Ich würde wie gesagt node12 empfehlen, bei node14 kann da noch die ein oder andere Stolperfalle lauern. Ein Downgrade ist ja mit der obigen Anleitung auch easy getan.
@Thomas-Braun
Vielen Dank! Mein Zigbee Adapter läuft auf jeden Fall schon mal.
Das hört sich jetzt für die wahrscheinlich verdammt blöd an - aber versteh sogar bei der Downgradeanleitung nur die Hälfte^^
Möchte dir auch keinen weiteren Aufwand machen. Sofern alles läuft wie es soll, lass ich mal auf 14 stehen. Sobald mehr Probleme auftauchen versuch ich mich nochmal am Downgrade.Jetzt ist erst mal ein Update vom Orange dran.
-
@Thomas-Braun
Vielen Dank! Mein Zigbee Adapter läuft auf jeden Fall schon mal.
Das hört sich jetzt für die wahrscheinlich verdammt blöd an - aber versteh sogar bei der Downgradeanleitung nur die Hälfte^^
Möchte dir auch keinen weiteren Aufwand machen. Sofern alles läuft wie es soll, lass ich mal auf 14 stehen. Sobald mehr Probleme auftauchen versuch ich mich nochmal am Downgrade.Jetzt ist erst mal ein Update vom Orange dran.
@Habedere
Dann würde ich aber mindestens node14 auf den letzten Stand bringen. -
@Habedere
Dann würde ich aber mindestens node14 auf den letzten Stand bringen.@Thomas-Braun
Gesagt getan :)pi@ioBroker-RasPi:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v14.13.0 /usr/bin/node v14.13.0 /usr/bin/npm 6.14.8 nodejs: Installiert: 14.13.0-1nodesource1 Installationskandidat: 14.13.0-1nodesource1 Versionstabelle: *** 14.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_14.x stretch/main armhf Packages 100 /var/lib/dpkg/status 8.11.1~dfsg-2~bpo9+1 500 500 http://archive.raspberrypi.org/debian stretch/main armhf Packages 4.8.2~dfsg-1 500 500 http://raspbian.raspberrypi.org/raspbian stretch/main armhf PackagesDanke nochmal
-
@Thomas-Braun
Gesagt getan :)pi@ioBroker-RasPi:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v14.13.0 /usr/bin/node v14.13.0 /usr/bin/npm 6.14.8 nodejs: Installiert: 14.13.0-1nodesource1 Installationskandidat: 14.13.0-1nodesource1 Versionstabelle: *** 14.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_14.x stretch/main armhf Packages 100 /var/lib/dpkg/status 8.11.1~dfsg-2~bpo9+1 500 500 http://archive.raspberrypi.org/debian stretch/main armhf Packages 4.8.2~dfsg-1 500 500 http://raspbian.raspberrypi.org/raspbian stretch/main armhf PackagesDanke nochmal
@Habedere Gerne.
Kann halt sein, das ein anderer Supporter dir sagt, du sollst auf node12 gehen, wenn du mit irgendeinem anderen Problem bei einem Adapter ankommst. -
@Habedere Gerne.
Kann halt sein, das ein anderer Supporter dir sagt, du sollst auf node12 gehen, wenn du mit irgendeinem anderen Problem bei einem Adapter ankommst. -
@Thomas-Braun
Jopp - hab ich auf dem Schirm.
Hätte ich ja auch gleich daruf kommen können, wenn man sich den Infoadapter ansieht:v14.13.0 (Es gibt eine neuere Version: v14.9.0 - Empfohlene Version v12.18.3)
Versuch macht kluch :)
@Habedere sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
v14.13.0 (Es gibt eine neuere Version: v14.9.0
Ist aber auch nicht logisch. Welcher Browser?
-
@Habedere sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
v14.13.0 (Es gibt eine neuere Version: v14.9.0
Ist aber auch nicht logisch. Welcher Browser?
@Thomas-Braun
ChromeHier mal kurz die Daten des Orange
root@orangepizero:~# which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v8.16.0 /usr/bin/node v8.16.0 /usr/bin/npm 6.4.1 nodejs: Installed: 8.16.0-1nodesource1 Candidate: 8.16.0-1nodesource1 Version table: *** 8.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_8.x stretch/main armhf Packages 100 /var/lib/dpkg/status 8.11.1~dfsg-2~bpo9+1 100 100 http://httpredir.debian.org/debian stretch-backports/main armhf Packages 4.8.2~dfsg-1 500 500 http://httpredir.debian.org/debian stretch/main armhf PackagesJs-controller ist noch 1.4.2 drauf.
Da ich es ja scheinbar am Raspi schon vergeigt habe, ist jetzt fraglich ob meine vorgehensweise korrekt war.
Ich arbeite mich einfach nach der u.g. Anleitung durch oder?!
https://forum.iobroker.net/topic/22867/how-to-node-js-für-iobroker-richtig-updaten/2 -
@Thomas-Braun
ChromeHier mal kurz die Daten des Orange
root@orangepizero:~# which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v8.16.0 /usr/bin/node v8.16.0 /usr/bin/npm 6.4.1 nodejs: Installed: 8.16.0-1nodesource1 Candidate: 8.16.0-1nodesource1 Version table: *** 8.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_8.x stretch/main armhf Packages 100 /var/lib/dpkg/status 8.11.1~dfsg-2~bpo9+1 100 100 http://httpredir.debian.org/debian stretch-backports/main armhf Packages 4.8.2~dfsg-1 500 500 http://httpredir.debian.org/debian stretch/main armhf PackagesJs-controller ist noch 1.4.2 drauf.
Da ich es ja scheinbar am Raspi schon vergeigt habe, ist jetzt fraglich ob meine vorgehensweise korrekt war.
Ich arbeite mich einfach nach der u.g. Anleitung durch oder?!
https://forum.iobroker.net/topic/22867/how-to-node-js-für-iobroker-richtig-updaten/2@Habedere
Nix gegen stabilostick, aber ich mache es immer nach 'meiner' Methode.
Einfach in der (bei dir offenbar bereits vorhandenen) Datei /etc/apt/sources.list.d/nodesource.list
die gewünschte Version eintragen und persudo apt update sudo apt dist-upgradehochziehen.
-
@Habedere
Nix gegen stabilostick, aber ich mache es immer nach 'meiner' Methode.
Einfach in der (bei dir offenbar bereits vorhandenen) Datei /etc/apt/sources.list.d/nodesource.list
die gewünschte Version eintragen und persudo apt update sudo apt dist-upgradehochziehen.
@Thomas-Braun
Ah ok - dachte nur weil die Anleitung offiziell verlinkt wird.Jetzt spinnt leider mein Mbus Adapter :(
host.orangepizero 2020-10-06 19:18:19.269 info Rebuild for adapter system.adapter.mbus.0 not successful in 3 tries. Adapter will not be restarted again. Please execute "npm install --production" in adapter directory manually. host.orangepizero 2020-10-06 19:18:19.268 error instance system.adapter.mbus.0 terminated with code 1 (JS_CONTROLLER_STOPPED) host.orangepizero 2020-10-06 19:18:19.267 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:985:32) host.orangepizero 2020-10-06 19:18:19.267 error Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1157:10) host.orangepizero 2020-10-06 19:18:19.266 error Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1137:30) host.orangepizero 2020-10-06 19:18:19.266 error Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/node-mbus/index.js:7:38) host.orangepizero 2020-10-06 19:18:19.265 error Caught by controller[0]: at bindings (/opt/iobroker/node_modules/node-mbus/node_modules/bindings/bindings.js:112:48) host.orangepizero 2020-10-06 19:18:19.264 error Caught by controller[0]: at require (internal/modules/cjs/helpers.js:72:18) host.orangepizero 2020-10-06 19:18:19.264 error Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1025:19) host.orangepizero 2020-10-06 19:18:19.263 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:878:14) host.orangepizero 2020-10-06 19:18:19.263 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:985:32) host.orangepizero 2020-10-06 19:18:19.262 error Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1187:18) host.orangepizero 2020-10-06 19:18:19.261 error Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`). host.orangepizero 2020-10-06 19:18:19.261 error Caught by controller[0]: NODE_MODULE_VERSION 72. Please try re-compiling or re-installing host.orangepizero 2020-10-06 19:18:19.260 error Caught by controller[0]: NODE_MODULE_VERSION 57. This version of Node.js requires host.orangepizero 2020-10-06 19:18:19.259 error Caught by controller[0]: was compiled against a different Node.js version using host.orangepizero 2020-10-06 19:18:19.258 error Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/node-mbus/build/Release/mbus.node' host.orangepizero 2020-10-06 19:18:19.257 error Caught by controller[0]: ^ host.orangepizero 2020-10-06 19:18:19.255 error Caught by controller[0]: throw e; host.orangepizero 2020-10-06 19:18:19.252 error Caught by controller[0]: /opt/iobroker/node_modules/node-mbus/node_modules/bindings/bindings.js:121 host.orangepizero 2020-10-06 19:18:17.692 info instance system.adapter.mbus.0 started with pid 1919 -
@Thomas-Braun
Ah ok - dachte nur weil die Anleitung offiziell verlinkt wird.Jetzt spinnt leider mein Mbus Adapter :(
host.orangepizero 2020-10-06 19:18:19.269 info Rebuild for adapter system.adapter.mbus.0 not successful in 3 tries. Adapter will not be restarted again. Please execute "npm install --production" in adapter directory manually. host.orangepizero 2020-10-06 19:18:19.268 error instance system.adapter.mbus.0 terminated with code 1 (JS_CONTROLLER_STOPPED) host.orangepizero 2020-10-06 19:18:19.267 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:985:32) host.orangepizero 2020-10-06 19:18:19.267 error Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1157:10) host.orangepizero 2020-10-06 19:18:19.266 error Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1137:30) host.orangepizero 2020-10-06 19:18:19.266 error Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/node-mbus/index.js:7:38) host.orangepizero 2020-10-06 19:18:19.265 error Caught by controller[0]: at bindings (/opt/iobroker/node_modules/node-mbus/node_modules/bindings/bindings.js:112:48) host.orangepizero 2020-10-06 19:18:19.264 error Caught by controller[0]: at require (internal/modules/cjs/helpers.js:72:18) host.orangepizero 2020-10-06 19:18:19.264 error Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1025:19) host.orangepizero 2020-10-06 19:18:19.263 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:878:14) host.orangepizero 2020-10-06 19:18:19.263 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:985:32) host.orangepizero 2020-10-06 19:18:19.262 error Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1187:18) host.orangepizero 2020-10-06 19:18:19.261 error Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`). host.orangepizero 2020-10-06 19:18:19.261 error Caught by controller[0]: NODE_MODULE_VERSION 72. Please try re-compiling or re-installing host.orangepizero 2020-10-06 19:18:19.260 error Caught by controller[0]: NODE_MODULE_VERSION 57. This version of Node.js requires host.orangepizero 2020-10-06 19:18:19.259 error Caught by controller[0]: was compiled against a different Node.js version using host.orangepizero 2020-10-06 19:18:19.258 error Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/node-mbus/build/Release/mbus.node' host.orangepizero 2020-10-06 19:18:19.257 error Caught by controller[0]: ^ host.orangepizero 2020-10-06 19:18:19.255 error Caught by controller[0]: throw e; host.orangepizero 2020-10-06 19:18:19.252 error Caught by controller[0]: /opt/iobroker/node_modules/node-mbus/node_modules/bindings/bindings.js:121 host.orangepizero 2020-10-06 19:18:17.692 info instance system.adapter.mbus.0 started with pid 1919@Habedere sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
Caught by controller[0]: the module (for instance, using
npm rebuildornpm install).cd /opt/iobroker npm rebuildSynology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
@Habedere sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
Caught by controller[0]: the module (for instance, using
npm rebuildornpm install).cd /opt/iobroker npm rebuild -
iobroker rebuild mbus@Thomas-Braun
...ja ... eigentlich wird es auch selbst behoben ..
. wollte aber sicher gehen und alles nochmal per "npm rebuild" durchführen lassen . -
@Habedere sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
Caught by controller[0]: the module (for instance, using
npm rebuildornpm install).cd /opt/iobroker npm rebuild@Glasfaser sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
@Habedere sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
Caught by controller[0]: the module (for instance, using
npm rebuildornpm install).cd /opt/iobroker npm rebuild/home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in d efinition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:383:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call (int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterDrain(uv_work_t*)’: ../src/serialport.cpp:424:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call (int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:460:17: error: variable or field ‘init’ declared void void init(v8::Handle<v8::Object> target) { ^~~~~~ ../src/serialport.cpp:460:13: error: ‘Handle’ is not a member of ‘v8’ void init(v8::Handle<v8::Object> target) { ^~ ../src/serialport.cpp:460:34: error: expected primary-expression before ‘>’ toke n void init(v8::Handle<v8::Object> target) { ^ ../src/serialport.cpp:460:36: error: ‘target’ was not declared in this scope void init(v8::Handle<v8::Object> target) { ^~~~~~ In file included from ../../nan/nan.h:53:0, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../src/serialport.cpp:485:25: error: ‘init’ was not declared in this scope NODE_MODULE(serialport, init); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:608:36: note: in defi nition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ serialport.target.mk:112: recipe for target 'Release/obj.target/serialport/src/s erialport.o' failed make: *** [Release/obj.target/serialport/src/serialport.o] Error 1 make: Leaving directory '/opt/iobroker/node_modules/iobroker.discovery/node_modu les/serialport/build' gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_module s/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:315:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_proces s.js:275:12) gyp ERR! System Linux 4.19.13-sunxi gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gy p/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/iobroker.discovery/node_modules/serialpo rt gyp ERR! node -v v12.18.4 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! serialport@6.2.2 install: `prebuild-install || node-gyp rebuild` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the serialport@6.2.2 install script. npm ERR! This is probably not a problem with npm. There is likely additional log ging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2020-10-06T19_31_30_970Z-debug.log -
@Glasfaser sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
@Habedere sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
Caught by controller[0]: the module (for instance, using
npm rebuildornpm install).cd /opt/iobroker npm rebuild/home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in d efinition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:383:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call (int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterDrain(uv_work_t*)’: ../src/serialport.cpp:424:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call (int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:460:17: error: variable or field ‘init’ declared void void init(v8::Handle<v8::Object> target) { ^~~~~~ ../src/serialport.cpp:460:13: error: ‘Handle’ is not a member of ‘v8’ void init(v8::Handle<v8::Object> target) { ^~ ../src/serialport.cpp:460:34: error: expected primary-expression before ‘>’ toke n void init(v8::Handle<v8::Object> target) { ^ ../src/serialport.cpp:460:36: error: ‘target’ was not declared in this scope void init(v8::Handle<v8::Object> target) { ^~~~~~ In file included from ../../nan/nan.h:53:0, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../src/serialport.cpp:485:25: error: ‘init’ was not declared in this scope NODE_MODULE(serialport, init); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:608:36: note: in defi nition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ serialport.target.mk:112: recipe for target 'Release/obj.target/serialport/src/s erialport.o' failed make: *** [Release/obj.target/serialport/src/serialport.o] Error 1 make: Leaving directory '/opt/iobroker/node_modules/iobroker.discovery/node_modu les/serialport/build' gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_module s/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:315:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_proces s.js:275:12) gyp ERR! System Linux 4.19.13-sunxi gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gy p/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/iobroker.discovery/node_modules/serialpo rt gyp ERR! node -v v12.18.4 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! serialport@6.2.2 install: `prebuild-install || node-gyp rebuild` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the serialport@6.2.2 install script. npm ERR! This is probably not a problem with npm. There is likely additional log ging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2020-10-06T19_31_30_970Z-debug.log -
iobroker rebuild mbus@Thomas-Braun sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
iobroker rebuild mbusroot@orangepizero:/opt/iobroker# iobroker rebuild mbus npm rebuild --loglevel error (System call) in "/opt/iobroker/node_modules/iobroker.mbus" In file included from ../../nan/nan_converters.h:67:0, from ../../nan/nan.h:221, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_converters_43_inl.h: In static member function ‘static Nan::imp::ToFactoryBase<v8::Boolean>::return_t Nan::imp::ToFactory<v8::Boolean>::convert(v8::Local<v8::Value>)’: ../../nan/nan_converters_43_inl.h:18:51: warning: ‘v8::MaybeLocal<v8::Boolean> v8::Value::ToBoolean(v8::Local<v8::Context>) const’ is deprecated: ToBoolean can never throw. Use Local version. [-Wdeprecated-declarations] val->To ## TYPE(isolate->GetCurrentContext()) \ ^ ../../nan/nan_converters_43_inl.h:22:1: note: in expansion of macro ‘X’ X(Boolean) ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2664:59: note: declared here V8_WARN_UNUSED_RESULT MaybeLocal<Boolean> ToBoolean( ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../../nan/nan_converters.h:67:0, from ../../nan/nan.h:221, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_converters_43_inl.h: In static member function ‘static Nan::imp::ValueFactoryBase<bool>::return_t Nan::imp::ToFactory<bool>::convert(v8::Local<v8::Value>)’: ../../nan/nan_converters_43_inl.h:37:57: warning: ‘v8::Maybe<bool> v8::Value::BooleanValue(v8::Local<v8::Context>) const’ is deprecated: BooleanValue can never throw. Use Isolate version. [-Wdeprecated-declarations] return val->NAME ## Value(isolate->GetCurrentContext()); \ ^ ../../nan/nan_converters_43_inl.h:40:1: note: in expansion of macro ‘X’ X(bool, Boolean) ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2702:51: note: declared here V8_WARN_UNUSED_RESULT Maybe<bool> BooleanValue( ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../../nan/nan_new.h:189:0, from ../../nan/nan.h:222, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_implementation_12_inl.h: In static member function ‘static Nan::imp::FactoryBase<v8::Function>::return_t Nan::imp::Factory<v8::Function>::New(Nan::FunctionCallback, v8::Local<v8::Value>)’: ../../nan/nan_implementation_12_inl.h:105:32: error: no matching function for call to ‘v8::Function::New(v8::Isolate*&, void (&)(const v8::FunctionCallbackInfo<v8::Value>&), v8::Local<v8::Object>&)’ , obj)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: candidate: static v8::MaybeLocal<v8::Function> v8::Function::New(v8::Local<v8::Context>, v8::FunctionCallback, v8::Local<v8::Value>, int, v8::ConstructorBehavior, v8::SideEffectType) static MaybeLocal<Function> New( ^~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: no known conversion for argument 1 from ‘v8::Isolate*’ to ‘v8::Local<v8::Context>’ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In constructor ‘Nan::Utf8String::Utf8String(v8::Local<v8::Value>)’: ../../nan/nan.h:1064:78: warning: ‘v8::Local<v8::String> v8::Value::ToString(v8::Isolate*) const’ is deprecated: Use maybe version [-Wdeprecated-declarations] v8::Local<v8::String> string = from->ToString(v8::Isolate::GetCurrent()); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2684:31: note: declared here Local<String> ToString(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(const char*, const v8::Local<v8::Value>&)’: ../../nan/nan.h:1855:64: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] New(persistentHandle)->Set(New(key).ToLocalChecked(), value); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(const v8::Local<v8::String>&, const v8::Local<v8::Value>&)’: ../../nan/nan.h:1861:42: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] New(persistentHandle)->Set(key, value); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(uint32_t, const v8::Local<v8::Value>&)’: ../../nan/nan.h:1867:44: warning: ‘bool v8::Object::Set(uint32_t, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] New(persistentHandle)->Set(index, value); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3508:22: note: declared here bool Set(uint32_t index, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::AsyncWorker::GetFromPersistent(const char*) const’: ../../nan/nan.h:1873:61: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] New(persistentHandle)->Get(New(key).ToLocalChecked())); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3553:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::AsyncWorker::GetFromPersistent(const v8::Local<v8::String>&) const’: ../../nan/nan.h:1879:55: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] return scope.Escape(New(persistentHandle)->Get(key)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3553:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::AsyncWorker::GetFromPersistent(uint32_t) const’: ../../nan/nan.h:1884:57: warning: ‘v8::Local<v8::Value> v8::Object::Get(uint32_t)’ is deprecated: Use maybe version [-Wdeprecated-declarations] return scope.Escape(New(persistentHandle)->Get(index)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3557:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(uint32_t index)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from /usr/include/c++/6/cassert:44:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node_object_wrap.h:26, from ../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_object_wrap.h: In destructor ‘virtual Nan::ObjectWrap::~ObjectWrap()’: ../../nan/nan_object_wrap.h:24:25: error: ‘class Nan::Persistent<v8::Object>’ has no member named ‘IsNearDeath’ assert(persistent().IsNearDeath()); ^ In file included from ../../nan/nan.h:2698:0, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_object_wrap.h: In member function ‘void Nan::ObjectWrap::MakeWeak()’: ../../nan/nan_object_wrap.h:67:34: warning: ‘void v8::PersistentBase<T>::MarkIndependent() [with T = v8::Object]’ is deprecated: Weak objects are always considered independent. Use TracedGlobal when trying to use EmbedderHeapTracer. Use a strong handle when trying to keep an object alive. [-Wdeprecated-declarations] persistent().MarkIndependent(); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:570:22: note: declared here V8_INLINE void MarkIndependent()); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from /usr/include/c++/6/cassert:44:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node_object_wrap.h:26, from ../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_object_wrap.h: In static member function ‘static void Nan::ObjectWrap::WeakCallback(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’: ../../nan/nan_object_wrap.h:124:26: error: ‘class Nan::Persistent<v8::Object>’ has no member named ‘IsNearDeath’ assert(wrap->handle_.IsNearDeath()); ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:41:48: error: no matching function for call to ‘v8::Value::ToString()’ v8::String::Utf8Value path(info[0]->ToString()); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2668:44: note: candidate: v8::MaybeLocal<v8::String> v8::Value::ToString(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<String> ToString( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2668:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2684:31: note: candidate: v8::Local<v8::String> v8::Value::ToString(v8::Isolate*) const Local<String> ToString(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2684:31: note: candidate expects 1 argument, 0 provided Local<String> ToString(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:48:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate: v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterOpen(uv_work_t*)’: ../src/serialport.cpp:95:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:113:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate: v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterUpdate(uv_work_t*)’: ../src/serialport.cpp:150:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterClose(uv_work_t*)’: ../src/serialport.cpp:188:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterFlush(uv_work_t*)’: ../src/serialport.cpp:231:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:250:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate: v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterSet(uv_work_t*)’: ../src/serialport.cpp:285:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’: ../src/serialport.cpp:329:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:330:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:331:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:336:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’: ../src/serialport.cpp:378:106: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:383:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterDrain(uv_work_t*)’: ../src/serialport.cpp:424:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:460:17: error: variable or field ‘init’ declared void void init(v8::Handle<v8::Object> target) { ^~~~~~ ../src/serialport.cpp:460:13: error: ‘Handle’ is not a member of ‘v8’ void init(v8::Handle<v8::Object> target) { ^~ ../src/serialport.cpp:460:34: error: expected primary-expression before ‘>’ token void init(v8::Handle<v8::Object> target) { ^ ../src/serialport.cpp:460:36: error: ‘target’ was not declared in this scope void init(v8::Handle<v8::Object> target) { ^~~~~~ In file included from ../../nan/nan.h:52:0, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../src/serialport.cpp:485:25: error: ‘init’ was not declared in this scope NODE_MODULE(serialport, init); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:608:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ make: *** [Release/obj.target/serialport/src/serialport.o] Error 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:315:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12) gyp ERR! System Linux 4.19.13-sunxi gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/iobroker.mbus/node_modules/serialport gyp ERR! node -v v12.18.4 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! serialport@6.2.2 install: `prebuild-install || node-gyp rebuild` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the serialport@6.2.2 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2020-10-06T19_36_22_957Z-debug.log Rebuild mbus done root@orangepizero:/opt/iobroker# root@orangepizero:/opt/iobroker# iobroker rebuild mbus In file included from ../../nan/nan_converters.h:67:0, from ../../nan/nan.h:221, from ../src/./serialport.h:6, -bash: root@orangepizero:/opt/iobroker#: No such file or directory from ../src/serialport.cpp:1: ../../nan/nan_converters_43_inl.h: In static member function ‘static Nan::imp::ToFactoryBase<v8::Boolean>::return_t Nan::imp::ToFactory<v8::Boolean>::convert(v8::Local<v8::Value>)’: ../../nan/nan_converters_43_inl.h:18:51: warning: ‘v8::MaybeLocal<v8::Boolean> v8::Value::ToBoolean(v8::Local<v8::Context>) const’ is deprecated: ToBoolean can never throw. Use Local version. [-Wdeprecated-declarations] val->To ## TYPE(isolate->GetCurrentContext()) \ ^ ../../nan/nan_converters_43_inl.h:22:1: note: in expansion of macro ‘X’ X(Boolean) ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2664:59: note: declared here V8_WARN_UNUSED_RESULT MaybeLocal<Boolean> ToBoolean( root@orangepizero:/opt/iobroker# npm rebuild --loglevel error (System call) in "/opt/iobroker/node_modules/iobroker.mbus" return val->NAME ## Value(isolate->GetCurrentContext()); \ -bash: syntax error near unexpected token `(' ^ ../../nan/nan_converters_43_inl.h:40:1: note: in expansion of macro ‘X’ X(bool, Boolean) ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, root@orangepizero:/opt/iobroker# In file included from ../../nan/nan_converters.h:67:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../../nan/nan.h:221, from: can't read /var/mail/../../nan/nan.h:221, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h: In static member function ‘static Nan::imp::ToFactoryBase<v8::Boolean>::return_t Nan::imp::ToFactory<v8::Boolean>::convert(v8::Local<v8::Value>)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h:18:51: warning: ‘v8::MaybeLocal<v8::Boolean> v8::Value::ToBoolean(v8::Local<v8::Context>) const’ is deprecated: ToBoolean can never throw. Use Local version. [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# val->To ## TYPE(isolate->GetCurrentContext()) \ from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_implementation_12_inl.h: In static member function ‘static Nan::imp::FactoryBase<v8::Function>::return_t Nan::imp::Factory<v8::Function>::New(Nan::FunctionCallback, v8::Local<v8::Value>)’: ../../nan/nan_implementation_12_inl.h:105:32: error: no matching function for call to ‘v8::Function::New(v8::Isolate*&, void (&)(const v8::FunctionCallbackInfo<v8::Value>&), v8::Local<v8::Object>&)’ , obj)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: candidate: static v8::MaybeLocal<v8::Function> v8::Function::New(v8::Local<v8::Context>, v8::FunctionCallback, v8::Local<v8::Value>, int, v8::ConstructorBehavior, v8::SideEffectType) static MaybeLocal<Function> New( ^~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: no known conversion for argument 1 from ‘v8::Isolate*’ to ‘v8::Local<v8::Context>’ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In constructor ‘Nan::Utf8String::Utf8String(v8val-: command not found root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h:22:1: note: in expansion of macro ‘X’ -bash: ../../nan/nan_converters_43_inl.h:22:1:: No such file or directory root@orangepizero:/opt/iobroker# X(Boolean) -bash: syntax error near unexpected token `Boolean' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2664:59: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2664:59:: No such file or directory root@orangepizero:/opt/iobroker# V8_WARN_UNUSED_RESULT MaybeLocal<Boolean> ToBoolean( -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../../nan/nan_converters.h:67:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../../nan/nan.h:221, from: can't read /var/mail/../../nan/nan.h:221, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h: In static member function ‘static Nan::imp::ValueFactoryBase<bool>::return_t Nan::imp::ToFactory<bool>::convert(v8::Local<v8::Value>)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h:37:57: warning: ‘v8::Maybe<bool> v8::Value::BooleanValue(v8::Local<v8::Context>) const’ is deprecated: BooleanValue can never throw. Use Isolate version. [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# return val->NAME ## Value(isolate->GetCurrentContext()); \ -bash: return: val-: numeric argument required -bash: return: can only `return' from a function or sourced script root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h:40:1: note: in expansion of macro ‘X’ -bash: ../../nan/nan_converters_43_inl.h:40:1:: No such file or directory root@orangepizero:/opt/iobroker# X(bool, Boolean) -bash: syntax error near unexpected token `bool,' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2702:51: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2702:51:: No such file or directory root@orangepizero:/opt/iobroker# V8_WARN_UNUSED_RESULT Maybe<bool> BooleanValue( -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../../nan/nan_new.h:189:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../../nan/nan.h:222, from: can't read /var/mail/../../nan/nan.h:222, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan_implementation_12_inl.h: In static member function ‘static Nan::imp::FactoryBase<v8::Function>::return_t Nan::imp::Factory<v8::Function>::New(Nan::FunctionCallback, v8::Local<v8::Value>)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan_implementation_12_inl.h:105:32: error: no matching function for call to ‘v8::Function::New(v8::Isolate*&, void (&)(const v8::FunctionCallbackInfo<v8::Value>&), v8::Local<v8::Object>&)’ -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# , obj)); -bash: syntax error near unexpected token `)' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: candidate: static v8::MaybeLocal<v8::Function> v8::Function::New(v8::Local<v8::Context>, v8::FunctionCallback, v8::Local<v8::Value>, int, v8::ConstructorBehavior, v8::SideEffectType) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# static MaybeLocal<Function> New( -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: no known conversion for argument 1 from ‘v8::Isolate*’ to ‘v8::Local<v8::Context>’ -bash: v8::Context: No such file or directory root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In constructor ‘Nan::Utf8String::Utf8String(v8::Local<v8::Value>)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1064:78: warning: ‘v8::Local<v8::String> v8::Value::ToString(v8::Isolate*) const’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# v8::Local<v8::String> string = from->ToString(v8::Isolate::GetCurrent()); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2684:31: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2684:31:: No such file or directory root@orangepizero:/opt/iobroker# Local<String> ToString(Isolate* isolate) const); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(const char*, const v8::Local<v8::Value>&)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1855:64: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# New(persistentHandle)->Set(New(key).ToLocalChecked(), value); -bash: syntax error near unexpected token `persistentHandle' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22:: No such file or directory root@orangepizero:/opt/iobroker# bool Set(Local<Value> key, Local<Value> value)); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(const v8::Local<v8::String>&, const v8::Local<v8::Value>&)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1861:42: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# New(persistentHandle)->Set(key, value); -bash: syntax error near unexpected token `persistentHandle' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22:: No such file or directory root@orangepizero:/opt/iobroker# bool Set(Local<Value> key, Local<Value> value)); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(uint32_t, const v8::Local<v8::Value>&)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1867:44: warning: ‘bool v8::Object::Set(uint32_t, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# New(persistentHandle)->Set(index, value); -bash: syntax error near unexpected token `persistentHandle' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3508:22: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3508:22:: No such file or directory root@orangepizero:/opt/iobroker# bool Set(uint32_t index, Local<Value> value)); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::AsyncWorker::GetFromPersistent(const char*) const’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1873:61: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# New(persistentHandle)->Get(New(key).ToLocalChecked())); -bash: syntax error near unexpected token `persistentHandle' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3553:51: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3553:51:: No such file or directory root@orangepizero:/opt/iobroker# V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); -bash: syntax error near unexpected token `"Use maybe version",' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::AsyncWorker::GetFromPersistent(const v8::Local<v8::String>&) const’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1879:55: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# return scope.Escape(New(persistentHandle)->Get(key)); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-interselbes spiel in grün...
-
@Thomas-Braun sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
iobroker rebuild mbusroot@orangepizero:/opt/iobroker# iobroker rebuild mbus npm rebuild --loglevel error (System call) in "/opt/iobroker/node_modules/iobroker.mbus" In file included from ../../nan/nan_converters.h:67:0, from ../../nan/nan.h:221, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_converters_43_inl.h: In static member function ‘static Nan::imp::ToFactoryBase<v8::Boolean>::return_t Nan::imp::ToFactory<v8::Boolean>::convert(v8::Local<v8::Value>)’: ../../nan/nan_converters_43_inl.h:18:51: warning: ‘v8::MaybeLocal<v8::Boolean> v8::Value::ToBoolean(v8::Local<v8::Context>) const’ is deprecated: ToBoolean can never throw. Use Local version. [-Wdeprecated-declarations] val->To ## TYPE(isolate->GetCurrentContext()) \ ^ ../../nan/nan_converters_43_inl.h:22:1: note: in expansion of macro ‘X’ X(Boolean) ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2664:59: note: declared here V8_WARN_UNUSED_RESULT MaybeLocal<Boolean> ToBoolean( ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../../nan/nan_converters.h:67:0, from ../../nan/nan.h:221, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_converters_43_inl.h: In static member function ‘static Nan::imp::ValueFactoryBase<bool>::return_t Nan::imp::ToFactory<bool>::convert(v8::Local<v8::Value>)’: ../../nan/nan_converters_43_inl.h:37:57: warning: ‘v8::Maybe<bool> v8::Value::BooleanValue(v8::Local<v8::Context>) const’ is deprecated: BooleanValue can never throw. Use Isolate version. [-Wdeprecated-declarations] return val->NAME ## Value(isolate->GetCurrentContext()); \ ^ ../../nan/nan_converters_43_inl.h:40:1: note: in expansion of macro ‘X’ X(bool, Boolean) ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2702:51: note: declared here V8_WARN_UNUSED_RESULT Maybe<bool> BooleanValue( ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../../nan/nan_new.h:189:0, from ../../nan/nan.h:222, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_implementation_12_inl.h: In static member function ‘static Nan::imp::FactoryBase<v8::Function>::return_t Nan::imp::Factory<v8::Function>::New(Nan::FunctionCallback, v8::Local<v8::Value>)’: ../../nan/nan_implementation_12_inl.h:105:32: error: no matching function for call to ‘v8::Function::New(v8::Isolate*&, void (&)(const v8::FunctionCallbackInfo<v8::Value>&), v8::Local<v8::Object>&)’ , obj)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: candidate: static v8::MaybeLocal<v8::Function> v8::Function::New(v8::Local<v8::Context>, v8::FunctionCallback, v8::Local<v8::Value>, int, v8::ConstructorBehavior, v8::SideEffectType) static MaybeLocal<Function> New( ^~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: no known conversion for argument 1 from ‘v8::Isolate*’ to ‘v8::Local<v8::Context>’ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In constructor ‘Nan::Utf8String::Utf8String(v8::Local<v8::Value>)’: ../../nan/nan.h:1064:78: warning: ‘v8::Local<v8::String> v8::Value::ToString(v8::Isolate*) const’ is deprecated: Use maybe version [-Wdeprecated-declarations] v8::Local<v8::String> string = from->ToString(v8::Isolate::GetCurrent()); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2684:31: note: declared here Local<String> ToString(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(const char*, const v8::Local<v8::Value>&)’: ../../nan/nan.h:1855:64: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] New(persistentHandle)->Set(New(key).ToLocalChecked(), value); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(const v8::Local<v8::String>&, const v8::Local<v8::Value>&)’: ../../nan/nan.h:1861:42: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] New(persistentHandle)->Set(key, value); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(uint32_t, const v8::Local<v8::Value>&)’: ../../nan/nan.h:1867:44: warning: ‘bool v8::Object::Set(uint32_t, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] New(persistentHandle)->Set(index, value); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3508:22: note: declared here bool Set(uint32_t index, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::AsyncWorker::GetFromPersistent(const char*) const’: ../../nan/nan.h:1873:61: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] New(persistentHandle)->Get(New(key).ToLocalChecked())); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3553:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::AsyncWorker::GetFromPersistent(const v8::Local<v8::String>&) const’: ../../nan/nan.h:1879:55: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] return scope.Escape(New(persistentHandle)->Get(key)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3553:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::AsyncWorker::GetFromPersistent(uint32_t) const’: ../../nan/nan.h:1884:57: warning: ‘v8::Local<v8::Value> v8::Object::Get(uint32_t)’ is deprecated: Use maybe version [-Wdeprecated-declarations] return scope.Escape(New(persistentHandle)->Get(index)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3557:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(uint32_t index)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from /usr/include/c++/6/cassert:44:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node_object_wrap.h:26, from ../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_object_wrap.h: In destructor ‘virtual Nan::ObjectWrap::~ObjectWrap()’: ../../nan/nan_object_wrap.h:24:25: error: ‘class Nan::Persistent<v8::Object>’ has no member named ‘IsNearDeath’ assert(persistent().IsNearDeath()); ^ In file included from ../../nan/nan.h:2698:0, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_object_wrap.h: In member function ‘void Nan::ObjectWrap::MakeWeak()’: ../../nan/nan_object_wrap.h:67:34: warning: ‘void v8::PersistentBase<T>::MarkIndependent() [with T = v8::Object]’ is deprecated: Weak objects are always considered independent. Use TracedGlobal when trying to use EmbedderHeapTracer. Use a strong handle when trying to keep an object alive. [-Wdeprecated-declarations] persistent().MarkIndependent(); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:570:22: note: declared here V8_INLINE void MarkIndependent()); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from /usr/include/c++/6/cassert:44:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node_object_wrap.h:26, from ../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_object_wrap.h: In static member function ‘static void Nan::ObjectWrap::WeakCallback(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’: ../../nan/nan_object_wrap.h:124:26: error: ‘class Nan::Persistent<v8::Object>’ has no member named ‘IsNearDeath’ assert(wrap->handle_.IsNearDeath()); ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:41:48: error: no matching function for call to ‘v8::Value::ToString()’ v8::String::Utf8Value path(info[0]->ToString()); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2668:44: note: candidate: v8::MaybeLocal<v8::String> v8::Value::ToString(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<String> ToString( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2668:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2684:31: note: candidate: v8::Local<v8::String> v8::Value::ToString(v8::Isolate*) const Local<String> ToString(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2684:31: note: candidate expects 1 argument, 0 provided Local<String> ToString(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:48:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate: v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterOpen(uv_work_t*)’: ../src/serialport.cpp:95:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:113:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate: v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterUpdate(uv_work_t*)’: ../src/serialport.cpp:150:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterClose(uv_work_t*)’: ../src/serialport.cpp:188:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterFlush(uv_work_t*)’: ../src/serialport.cpp:231:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:250:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate: v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterSet(uv_work_t*)’: ../src/serialport.cpp:285:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’: ../src/serialport.cpp:329:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:330:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:331:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:336:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’: ../src/serialport.cpp:378:106: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:383:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterDrain(uv_work_t*)’: ../src/serialport.cpp:424:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1655:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:460:17: error: variable or field ‘init’ declared void void init(v8::Handle<v8::Object> target) { ^~~~~~ ../src/serialport.cpp:460:13: error: ‘Handle’ is not a member of ‘v8’ void init(v8::Handle<v8::Object> target) { ^~ ../src/serialport.cpp:460:34: error: expected primary-expression before ‘>’ token void init(v8::Handle<v8::Object> target) { ^ ../src/serialport.cpp:460:36: error: ‘target’ was not declared in this scope void init(v8::Handle<v8::Object> target) { ^~~~~~ In file included from ../../nan/nan.h:52:0, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../src/serialport.cpp:485:25: error: ‘init’ was not declared in this scope NODE_MODULE(serialport, init); ^ /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:608:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ make: *** [Release/obj.target/serialport/src/serialport.o] Error 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:315:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12) gyp ERR! System Linux 4.19.13-sunxi gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/iobroker.mbus/node_modules/serialport gyp ERR! node -v v12.18.4 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! serialport@6.2.2 install: `prebuild-install || node-gyp rebuild` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the serialport@6.2.2 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2020-10-06T19_36_22_957Z-debug.log Rebuild mbus done root@orangepizero:/opt/iobroker# root@orangepizero:/opt/iobroker# iobroker rebuild mbus In file included from ../../nan/nan_converters.h:67:0, from ../../nan/nan.h:221, from ../src/./serialport.h:6, -bash: root@orangepizero:/opt/iobroker#: No such file or directory from ../src/serialport.cpp:1: ../../nan/nan_converters_43_inl.h: In static member function ‘static Nan::imp::ToFactoryBase<v8::Boolean>::return_t Nan::imp::ToFactory<v8::Boolean>::convert(v8::Local<v8::Value>)’: ../../nan/nan_converters_43_inl.h:18:51: warning: ‘v8::MaybeLocal<v8::Boolean> v8::Value::ToBoolean(v8::Local<v8::Context>) const’ is deprecated: ToBoolean can never throw. Use Local version. [-Wdeprecated-declarations] val->To ## TYPE(isolate->GetCurrentContext()) \ ^ ../../nan/nan_converters_43_inl.h:22:1: note: in expansion of macro ‘X’ X(Boolean) ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2664:59: note: declared here V8_WARN_UNUSED_RESULT MaybeLocal<Boolean> ToBoolean( root@orangepizero:/opt/iobroker# npm rebuild --loglevel error (System call) in "/opt/iobroker/node_modules/iobroker.mbus" return val->NAME ## Value(isolate->GetCurrentContext()); \ -bash: syntax error near unexpected token `(' ^ ../../nan/nan_converters_43_inl.h:40:1: note: in expansion of macro ‘X’ X(bool, Boolean) ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, root@orangepizero:/opt/iobroker# In file included from ../../nan/nan_converters.h:67:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../../nan/nan.h:221, from: can't read /var/mail/../../nan/nan.h:221, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h: In static member function ‘static Nan::imp::ToFactoryBase<v8::Boolean>::return_t Nan::imp::ToFactory<v8::Boolean>::convert(v8::Local<v8::Value>)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h:18:51: warning: ‘v8::MaybeLocal<v8::Boolean> v8::Value::ToBoolean(v8::Local<v8::Context>) const’ is deprecated: ToBoolean can never throw. Use Local version. [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# val->To ## TYPE(isolate->GetCurrentContext()) \ from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan_implementation_12_inl.h: In static member function ‘static Nan::imp::FactoryBase<v8::Function>::return_t Nan::imp::Factory<v8::Function>::New(Nan::FunctionCallback, v8::Local<v8::Value>)’: ../../nan/nan_implementation_12_inl.h:105:32: error: no matching function for call to ‘v8::Function::New(v8::Isolate*&, void (&)(const v8::FunctionCallbackInfo<v8::Value>&), v8::Local<v8::Object>&)’ , obj)); ^ In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, from ../../nan/nan.h:52, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: candidate: static v8::MaybeLocal<v8::Function> v8::Function::New(v8::Local<v8::Context>, v8::FunctionCallback, v8::Local<v8::Value>, int, v8::ConstructorBehavior, v8::SideEffectType) static MaybeLocal<Function> New( ^~~ /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: no known conversion for argument 1 from ‘v8::Isolate*’ to ‘v8::Local<v8::Context>’ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h: In constructor ‘Nan::Utf8String::Utf8String(v8val-: command not found root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h:22:1: note: in expansion of macro ‘X’ -bash: ../../nan/nan_converters_43_inl.h:22:1:: No such file or directory root@orangepizero:/opt/iobroker# X(Boolean) -bash: syntax error near unexpected token `Boolean' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2664:59: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2664:59:: No such file or directory root@orangepizero:/opt/iobroker# V8_WARN_UNUSED_RESULT MaybeLocal<Boolean> ToBoolean( -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../../nan/nan_converters.h:67:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../../nan/nan.h:221, from: can't read /var/mail/../../nan/nan.h:221, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h: In static member function ‘static Nan::imp::ValueFactoryBase<bool>::return_t Nan::imp::ToFactory<bool>::convert(v8::Local<v8::Value>)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h:37:57: warning: ‘v8::Maybe<bool> v8::Value::BooleanValue(v8::Local<v8::Context>) const’ is deprecated: BooleanValue can never throw. Use Isolate version. [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# return val->NAME ## Value(isolate->GetCurrentContext()); \ -bash: return: val-: numeric argument required -bash: return: can only `return' from a function or sourced script root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# ../../nan/nan_converters_43_inl.h:40:1: note: in expansion of macro ‘X’ -bash: ../../nan/nan_converters_43_inl.h:40:1:: No such file or directory root@orangepizero:/opt/iobroker# X(bool, Boolean) -bash: syntax error near unexpected token `bool,' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2702:51: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2702:51:: No such file or directory root@orangepizero:/opt/iobroker# V8_WARN_UNUSED_RESULT Maybe<bool> BooleanValue( -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../../nan/nan_new.h:189:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../../nan/nan.h:222, from: can't read /var/mail/../../nan/nan.h:222, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan_implementation_12_inl.h: In static member function ‘static Nan::imp::FactoryBase<v8::Function>::return_t Nan::imp::Factory<v8::Function>::New(Nan::FunctionCallback, v8::Local<v8::Value>)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan_implementation_12_inl.h:105:32: error: no matching function for call to ‘v8::Function::New(v8::Isolate*&, void (&)(const v8::FunctionCallbackInfo<v8::Value>&), v8::Local<v8::Object>&)’ -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# , obj)); -bash: syntax error near unexpected token `)' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: candidate: static v8::MaybeLocal<v8::Function> v8::Function::New(v8::Local<v8::Context>, v8::FunctionCallback, v8::Local<v8::Value>, int, v8::ConstructorBehavior, v8::SideEffectType) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# static MaybeLocal<Function> New( -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:4275:31: note: no known conversion for argument 1 from ‘v8::Isolate*’ to ‘v8::Local<v8::Context>’ -bash: v8::Context: No such file or directory root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In constructor ‘Nan::Utf8String::Utf8String(v8::Local<v8::Value>)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1064:78: warning: ‘v8::Local<v8::String> v8::Value::ToString(v8::Isolate*) const’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# v8::Local<v8::String> string = from->ToString(v8::Isolate::GetCurrent()); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2684:31: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:2684:31:: No such file or directory root@orangepizero:/opt/iobroker# Local<String> ToString(Isolate* isolate) const); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(const char*, const v8::Local<v8::Value>&)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1855:64: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# New(persistentHandle)->Set(New(key).ToLocalChecked(), value); -bash: syntax error near unexpected token `persistentHandle' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22:: No such file or directory root@orangepizero:/opt/iobroker# bool Set(Local<Value> key, Local<Value> value)); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(const v8::Local<v8::String>&, const v8::Local<v8::Value>&)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1861:42: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# New(persistentHandle)->Set(key, value); -bash: syntax error near unexpected token `persistentHandle' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3499:22:: No such file or directory root@orangepizero:/opt/iobroker# bool Set(Local<Value> key, Local<Value> value)); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In member function ‘void Nan::AsyncWorker::SaveToPersistent(uint32_t, const v8::Local<v8::Value>&)’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1867:44: warning: ‘bool v8::Object::Set(uint32_t, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# New(persistentHandle)->Set(index, value); -bash: syntax error near unexpected token `persistentHandle' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3508:22: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3508:22:: No such file or directory root@orangepizero:/opt/iobroker# bool Set(uint32_t index, Local<Value> value)); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::AsyncWorker::GetFromPersistent(const char*) const’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1873:61: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# New(persistentHandle)->Get(New(key).ToLocalChecked())); -bash: syntax error near unexpected token `persistentHandle' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-internal.h:14:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:27, root@orangepizero:/opt/iobroker# from /home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, from: can't read /var/mail//home/iobroker/.cache/node-gyp/12.18.4/include/node/node.h:67, root@orangepizero:/opt/iobroker# from ../../nan/nan.h:52, from: can't read /var/mail/../../nan/nan.h:52, root@orangepizero:/opt/iobroker# from ../src/./serialport.h:6, from: can't read /var/mail/../src/./serialport.h:6, root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3553:51: note: declared here -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8.h:3553:51:: No such file or directory root@orangepizero:/opt/iobroker# V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); -bash: syntax error near unexpected token `"Use maybe version",' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ -bash: /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8config.h:328:3:: No such file or directory root@orangepizero:/opt/iobroker# declarator __attribute__((deprecated(message))) -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^~~~~~~~~~ Could not find the database of available applications, run update-command-not-found as root to fix this ^~~~~~~~~~: command not found root@orangepizero:/opt/iobroker# In file included from ../src/./serialport.h:6:0, Could not find the database of available applications, run update-command-not-found as root to fix this In: command not found root@orangepizero:/opt/iobroker# from ../src/serialport.cpp:1: from: can't read /var/mail/../src/serialport.cpp:1: root@orangepizero:/opt/iobroker# ../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::AsyncWorker::GetFromPersistent(const v8::Local<v8::String>&) const’: -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ../../nan/nan.h:1879:55: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# return scope.Escape(New(persistentHandle)->Get(key)); -bash: syntax error near unexpected token `(' root@orangepizero:/opt/iobroker# ^ Could not find the database of available applications, run update-command-not-found as root to fix this ^: command not found root@orangepizero:/opt/iobroker# In file included from /home/iobroker/.cache/node-gyp/12.18.4/include/node/v8-interselbes spiel in grün...
-
@Glasfaser sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
installiere ihn neu :
alles klar - ich probiers...
-
@Glasfaser sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
installiere ihn neu :
alles klar - ich probiers...
root@orangepizeroBitte nicht als root anmelden. Da läuft doch bestimmt das debian-artiges?
-
root@orangepizeroBitte nicht als root anmelden. Da läuft doch bestimmt das debian-artiges?
@Thomas-Braun sagte in [HowTo] Nodejs-Installation und Upgrades unter Debian:
root@orangepizeroBitte nicht als root anmelden. Da läuft doch bestimmt das debian-artiges?
Welcome to ARMBIAN 5.69 stable Debian GNU/Linux 9 (stretch) 4.19.13-sunxi
System load: 1.46 0.55 0.20 Up time: 1 min
Memory usage: 39 % of 493MB IP: 192.168.178.4
CPU temp: 54°C
Usage of /: 8% of 29GHmm auf dem Orange bin ich so selten drauf - der ist nur für den Mbus da.
PS: Der Mbus Adapter läuft wieder :) THX @all
459
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge