NEWS
[gelöst] Zigbee: uncaught exception: Timeout
-
Da wird irgendeine Timeout exception tief in Herdsman nicht abgefangen (bzw. die Promise-Rejection nicht behandelt). js-controller 3.0 macht das zu fatalen Fehlern und killt damit den Adapter. Könnte auch ein Problem in Herdsman sein.
Ultimativer Lovelace Leitfaden: https://forum.iobroker.net/topic/35937/der-ultimative-iobroker-lovelace-leitfaden-dokumentation
Lovelace UI Beispiele: https://forum.iobroker.net/topic/35950/zeigt-her-eure-lovelace-visualisierung
-
Da wird irgendeine Timeout exception tief in Herdsman nicht abgefangen (bzw. die Promise-Rejection nicht behandelt). js-controller 3.0 macht das zu fatalen Fehlern und killt damit den Adapter. Könnte auch ein Problem in Herdsman sein.
@Garfonso das klingt gut, hilft mir aber leider nicht :cry: Gibt es seitens der Entwickler da ne Chance auf Fehlerbehebung?
Ich habe gerade mal geschaut, heute wurde der Adapter drei mal neu gestartet.
Gruß Michael
Sofern Beiträge hilfreich für Dich sind, nutze das Voting unten rechts. -
@Garfonso das klingt gut, hilft mir aber leider nicht :cry: Gibt es seitens der Entwickler da ne Chance auf Fehlerbehebung?
Ich habe gerade mal geschaut, heute wurde der Adapter drei mal neu gestartet.
@MichMein
Das müssen die Entwickler beheben, ja... vielleicht machst du mit dem Log, falls noch nicht geschehen, beim github des zigbee adapters mal ein Issue auf -> dann haben die Entwickler das an zentraler Stelle und werden da auch dran erinnert. :-)
Ggf. ist es aber etwas komplexer, weil das Problem sich nicht im zigbee Adapter lösen lässt, sondern nur im Herdsmann, da müsste man dann dort den Fehler beheben, das könnte es etwas verzögern. -
@Garfonso das klingt gut, hilft mir aber leider nicht :cry: Gibt es seitens der Entwickler da ne Chance auf Fehlerbehebung?
Ich habe gerade mal geschaut, heute wurde der Adapter drei mal neu gestartet.
-
Ich habe vom Entwickler die Info, dass im Herdsman das Provblem behoben wurde. Ich habe den Zigbee-Adapter via Git drüber installiert (Version bleibt 1.1.1) und dies hat bei mir den Fehler behoben.
Git-Installation für alle betroffenen auf eigene Gefahr. BACKUP vorher nicht vergessen ;)UDM Pro, Intel NUC - ioBroker in Proxmox-VM, PiHole+Grafana&Influx+TasmoAdmin in LXCs, Raspberry Pi3 (als CCU), Zigbee-Stick Sonoff, Synology DS918+
-
Ich habe vom Entwickler die Info, dass im Herdsman das Provblem behoben wurde. Ich habe den Zigbee-Adapter via Git drüber installiert (Version bleibt 1.1.1) und dies hat bei mir den Fehler behoben.
Git-Installation für alle betroffenen auf eigene Gefahr. BACKUP vorher nicht vergessen ;) -
Ich habe den Adapter über Git neuinstalliert und habe folgende Meldungen im Log gefunden, vielleicht kann mir jemand etwas genaueres dazu sagen
2020-05-05 13:57:10.695 - info: host.raspberrypi iobroker url "https://github.com/ioBroker/ioBroker.zigbee/tarball/master" zigbee 2020-05-05 13:57:12.292 - info: host.raspberrypi iobroker install https://github.com/ioBroker/ioBroker.zigbee/tarball/master 2020-05-05 13:57:12.911 - info: host.raspberrypi iobroker NPM version: 6.14.4 2020-05-05 13:57:12.913 - info: host.raspberrypi iobroker npm install https://github.com/ioBroker/ioBroker.zigbee/tarball/master --loglevel error --prefix "/opt/iobroker" (System call) 2020-05-05 13:58:07.692 - info: host.raspberrypi iobroker upload [200] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tuya_TS0201.png img/tuya_TS0201.png image/png 2020-05-05 13:58:10.779 - info: host.raspberrypi iobroker upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/osram_surface_light_tw.png img/osram_surface_light_tw.png image/png 2020-05-05 13:58:13.858 - info: host.raspberrypi iobroker upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/innr_color_gu10.png img/innr_color_gu10.png image/png 2020-05-05 13:58:14.493 - info: host.raspberrypi iobroker upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_transformer.png img/ikea_transformer.png image/png 2020-05-05 13:58:15.627 - info: host.raspberrypi iobroker upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_e14_bulb.png img/ikea_e14_bulb.png image/png 2020-05-05 13:58:16.232 - info: host.raspberrypi iobroker upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hs1sa.png img/hs1sa.png image/png 2020-05-05 13:58:16.850 - info: host.raspberrypi iobroker upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gld003z.png img/gld003z.png image/png 2020-05-05 13:58:17.441 - info: host.raspberrypi iobroker upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ewelink_DS01.png img/ewelink_DS01.png image/png 2020-05-05 13:58:18.054 - info: host.raspberrypi iobroker upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_ln2.png img/ctrl_ln2.png image/png 2020-05-05 13:58:18.668 - info: host.raspberrypi iobroker upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_switch.png img/aqara_switch.png image/png 2020-05-05 13:58:19.265 - info: host.raspberrypi iobroker upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LCT002.png img/LCT002.png image/png 2020-05-05 13:58:19.324 - info: host.raspberrypi iobroker upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png 2020-05-05 13:58:19.381 - info: host.raspberrypi iobroker upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png 2020-05-05 13:58:19.443 - info: host.raspberrypi iobroker upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png 2020-05-05 13:58:19.505 - info: host.raspberrypi iobroker upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png 2020-05-05 13:58:19.567 - info: host.raspberrypi iobroker upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Bitron_AV201021A.png img/Bitron_AV201021A.png image/png 2020-05-05 13:58:19.629 - info: host.raspberrypi iobroker upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/AV2010_32.png img/AV2010_32.png image/png 2020-05-05 13:58:19.690 - info: host.raspberrypi iobroker upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png 2020-05-05 13:58:19.752 - info: host.raspberrypi iobroker upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png 2020-05-05 13:58:19.813 - info: host.raspberrypi iobroker upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png 2020-05-05 13:58:19.875 - info: host.raspberrypi iobroker upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json 2020-05-05 13:58:19.939 - info: host.raspberrypi iobroker upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/ru/translations.json i18n/ru/translations.json application/json 2020-05-05 13:58:20.000 - info: host.raspberrypi iobroker upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pt/translations.json i18n/pt/translations.json application/json 2020-05-05 13:58:20.064 - info: host.raspberrypi iobroker upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pl/translations.json i18n/pl/translations.json application/json 2020-05-05 13:58:20.150 - info: host.raspberrypi iobroker upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/nl/translations.json i18n/nl/translations.json application/json 2020-05-05 13:58:20.259 - info: host.raspberrypi iobroker upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/it/translations.json i18n/it/translations.json application/json 2020-05-05 13:58:20.322 - info: host.raspberrypi iobroker upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/fr/translations.json i18n/fr/translations.json application/json 2020-05-05 13:58:20.404 - info: host.raspberrypi iobroker upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/es/translations.json i18n/es/translations.json application/json 2020-05-05 13:58:20.466 - info: host.raspberrypi iobroker upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/en/translations.json i18n/en/translations.json application/json 2020-05-05 13:58:20.533 - info: host.raspberrypi iobroker upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/de/translations.json i18n/de/translations.json application/json 2020-05-05 13:58:20.597 - info: host.raspberrypi iobroker upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript 2020-05-05 13:58:20.685 - info: host.raspberrypi iobroker Update "system.adapter.zigbee.0" 2020-05-05 13:58:20.704 - info: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true) 2020-05-05 13:58:20.706 - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal 2020-05-05 13:58:20.712 - info: zigbee.0 (32715) Got terminate signal TERMINATE_YOURSELF 2020-05-05 13:58:20.715 - info: zigbee.0 (32715) cleaned everything up... 2020-05-05 13:58:20.718 - info: zigbee.0 (32715) Zigbee: disabling joining new devices. 2020-05-05 13:58:20.976 - info: zigbee.0 (32715) terminating 2020-05-05 13:58:20.977 - info: zigbee.0 (32715) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2020-05-05 13:58:21.528 - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2020-05-05 13:58:21.715 - info: host.raspberrypi iobroker exit 0 2020-05-05 13:58:22.082 - info: host.raspberrypi Update repository "latest" under "http://download.iobroker.net/sources-dist-latest.json" 2020-05-05 13:58:23.870 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 15253 2020-05-05 13:58:24.368 - error: host.raspberrypi Caught by controller[0]: /opt/iobroker/node_modules/bindings/bindings.js:121 2020-05-05 13:58:24.368 - error: host.raspberrypi Caught by controller[0]: throw e; 2020-05-05 13:58:24.368 - error: host.raspberrypi Caught by controller[0]: ^ 2020-05-05 13:58:24.369 - error: host.raspberrypi Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node' 2020-05-05 13:58:24.369 - error: host.raspberrypi Caught by controller[0]: was compiled against a different Node.js version using 2020-05-05 13:58:24.369 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 64. This version of Node.js requires 2020-05-05 13:58:24.369 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 72. Please try re-compiling or re-installing 2020-05-05 13:58:24.369 - error: host.raspberrypi Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`). 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1183:18) 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:977:32) 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:877:14) 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1019:19) 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at require (internal/modules/cjs/helpers.js:77:18) 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at bindings (/opt/iobroker/node_modules/bindings/bindings.js:112:48) 2020-05-05 13:58:24.371 - error: host.raspberrypi Caught by controller[0]: at Object. (/opt/iobroker/node_modules/@serialport/bindings/lib/linux.js:2:36) 2020-05-05 13:58:24.371 - error: host.raspberrypi Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1133:30) 2020-05-05 13:58:24.371 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1153:10) 2020-05-05 13:58:24.371 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:977:32) 2020-05-05 13:58:24.371 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2020-05-05 13:58:24.372 - info: host.raspberrypi Adapter system.adapter.zigbee.0 needs rebuild and will be restarted afterwards. 2020-05-05 13:58:24.372 - info: host.raspberrypi system.adapter.zigbee.0 will be rebuilt 2020-05-05 13:58:24.373 - warn: host.raspberrypi adapter "zigbee" seems to be installed for a different version of Node.js. Trying to rebuild it... 1 attempt 2020-05-05 13:58:24.373 - info: host.raspberrypi iobroker rebuild zigbee 2020-05-05 13:58:24.906 - info: host.raspberrypi iobroker npm-rebuild: npm rebuild --loglevel error (System call) in "/opt/iobroker/node_modules/iobroker.zigbee" 2020-05-05 13:58:25.959 - info: host.raspberrypi iobroker npm-rebuild: Rebuild zigbee done 2020-05-05 13:58:26.908 - info: host.raspberrypi iobroker npm-rebuild: exit 0 2020-05-05 13:58:26.978 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 15445 2020-05-05 13:58:27.442 - error: host.raspberrypi Caught by controller[0]: /opt/iobroker/node_modules/bindings/bindings.js:121 2020-05-05 13:58:27.443 - error: host.raspberrypi Caught by controller[0]: throw e; 2020-05-05 13:58:27.443 - error: host.raspberrypi Caught by controller[0]: ^ 2020-05-05 13:58:27.443 - error: host.raspberrypi Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node' 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: was compiled against a different Node.js version using 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 64. This version of Node.js requires 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 72. Please try re-compiling or re-installing 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`). 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1183:18) 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:977:32) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:877:14) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1019:19) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at require (internal/modules/cjs/helpers.js:77:18) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at bindings (/opt/iobroker/node_modules/bindings/bindings.js:112:48) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at Object. (/opt/iobroker/node_modules/@serialport/bindings/lib/linux.js:2:36) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1133:30) 2020-05-05 13:58:27.446 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1153:10) 2020-05-05 13:58:27.446 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:977:32) 2020-05-05 13:58:27.446 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2020-05-05 13:58:27.446 - info: host.raspberrypi Adapter system.adapter.zigbee.0 needs rebuild and will be restarted afterwards. 2020-05-05 13:58:27.447 - info: host.raspberrypi system.adapter.zigbee.0 will be rebuilt 2020-05-05 13:58:27.447 - warn: host.raspberrypi adapter "zigbee" seems to be installed for a different version of Node.js. Trying to rebuild it... 2 attempt 2020-05-05 13:58:27.447 - info: host.raspberrypi iobroker rebuild zigbee --install 2020-05-05 13:58:27.604 - warn: readFile will not read this file (simple-api.png) in future versions: simple-api.admin is not an object of type "meta" 2020-05-05 13:58:27.625 - warn: readFile will not read this file (socketio.png) in future versions: socketio.admin is not an object of type "meta" 2020-05-05 13:58:27.972 - info: host.raspberrypi iobroker npm-rebuild: npm install --loglevel error --production (System call) in "/opt/iobroker/node_modules/iobroker.zigbee" 2020-05-05 13:58:58.428 - info: host.raspberrypi iobroker npm-rebuild: In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast(AsyncExecuteComplete) ^ 2020-05-05 13:58:58.488 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ 2020-05-05 13:58:58.494 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ 2020-05-05 13:58:58.498 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ 2020-05-05 13:58:58.501 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ 2020-05-05 13:58:58.505 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ 2020-05-05 13:58:58.509 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ 2020-05-05 13:58:58.515 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ 2020-05-05 13:58:58.521 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ 2020-05-05 13:58:58.523 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: At global scope:../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local& v8str)) { ^ 2020-05-05 13:58:58.525 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ 2020-05-05 13:58:58.528 - info: host.raspberrypi iobroker npm-rebuild: In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local, v8::Local, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^/home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ 2020-05-05 13:59:01.879 - info: host.raspberrypi iobroker npm-rebuild: In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast(AsyncExecuteComplete) ^ 2020-05-05 13:59:02.221 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2020-05-05 13:59:02.261 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2020-05-05 13:59:03.778 - info: host.raspberrypi iobroker npm-rebuild: In file included from ../src/poller.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast(AsyncExecuteComplete) ^ 2020-05-05 13:59:07.320 - info: host.raspberrypi iobroker npm-rebuild: 2020-05-05 13:59:07.321 - info: host.raspberrypi iobroker npm-rebuild: Rebuild zigbee done 2020-05-05 13:59:08.339 - info: host.raspberrypi iobroker npm-rebuild: exit 0 2020-05-05 13:59:08.426 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 16543 2020-05-05 13:59:09.957 - info: zigbee.0 (16543) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.3, js-controller: 3.0.20 2020-05-05 13:59:09.992 - info: zigbee.0 (16543) Starting Zigbee... 2020-05-05 13:59:11.410 - info: zigbee.0 (16543) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20200211}} 2020-05-05 13:59:11.419 - info: zigbee.0 (16543) --> transmitPower : high 2020-05-05 13:59:11.431 - info: zigbee.0 (16543) Currently 5 devices are joined: 2020-05-05 13:59:11.440 - info: zigbee.0 (16543) 0x00158d0004659dbd (addr 454): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-05-05 13:59:11.442 - info: zigbee.0 (16543) 0x00158d0004208499 (addr 35479): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) 2020-05-05 13:59:11.445 - info: zigbee.0 (16543) 0x84182600000f0c04 (addr 62092): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-05-05 13:59:11.446 - info: zigbee.0 (16543) 0x00158d00042d1b54 (addr 2753): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) 2020-05-05 13:59:11.447 - info: zigbee.0 (16543) 0x00158d0004658581 (addr 12099): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-05-05 13:59:11.448 - info: zigbee.0 (16543) Zigbee started -
Ich habe den Adapter über Git neuinstalliert und habe folgende Meldungen im Log gefunden, vielleicht kann mir jemand etwas genaueres dazu sagen
2020-05-05 13:57:10.695 - info: host.raspberrypi iobroker url "https://github.com/ioBroker/ioBroker.zigbee/tarball/master" zigbee 2020-05-05 13:57:12.292 - info: host.raspberrypi iobroker install https://github.com/ioBroker/ioBroker.zigbee/tarball/master 2020-05-05 13:57:12.911 - info: host.raspberrypi iobroker NPM version: 6.14.4 2020-05-05 13:57:12.913 - info: host.raspberrypi iobroker npm install https://github.com/ioBroker/ioBroker.zigbee/tarball/master --loglevel error --prefix "/opt/iobroker" (System call) 2020-05-05 13:58:07.692 - info: host.raspberrypi iobroker upload [200] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tuya_TS0201.png img/tuya_TS0201.png image/png 2020-05-05 13:58:10.779 - info: host.raspberrypi iobroker upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/osram_surface_light_tw.png img/osram_surface_light_tw.png image/png 2020-05-05 13:58:13.858 - info: host.raspberrypi iobroker upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/innr_color_gu10.png img/innr_color_gu10.png image/png 2020-05-05 13:58:14.493 - info: host.raspberrypi iobroker upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_transformer.png img/ikea_transformer.png image/png 2020-05-05 13:58:15.627 - info: host.raspberrypi iobroker upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_e14_bulb.png img/ikea_e14_bulb.png image/png 2020-05-05 13:58:16.232 - info: host.raspberrypi iobroker upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hs1sa.png img/hs1sa.png image/png 2020-05-05 13:58:16.850 - info: host.raspberrypi iobroker upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gld003z.png img/gld003z.png image/png 2020-05-05 13:58:17.441 - info: host.raspberrypi iobroker upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ewelink_DS01.png img/ewelink_DS01.png image/png 2020-05-05 13:58:18.054 - info: host.raspberrypi iobroker upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_ln2.png img/ctrl_ln2.png image/png 2020-05-05 13:58:18.668 - info: host.raspberrypi iobroker upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_switch.png img/aqara_switch.png image/png 2020-05-05 13:58:19.265 - info: host.raspberrypi iobroker upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LCT002.png img/LCT002.png image/png 2020-05-05 13:58:19.324 - info: host.raspberrypi iobroker upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png 2020-05-05 13:58:19.381 - info: host.raspberrypi iobroker upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png 2020-05-05 13:58:19.443 - info: host.raspberrypi iobroker upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png 2020-05-05 13:58:19.505 - info: host.raspberrypi iobroker upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png 2020-05-05 13:58:19.567 - info: host.raspberrypi iobroker upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Bitron_AV201021A.png img/Bitron_AV201021A.png image/png 2020-05-05 13:58:19.629 - info: host.raspberrypi iobroker upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/AV2010_32.png img/AV2010_32.png image/png 2020-05-05 13:58:19.690 - info: host.raspberrypi iobroker upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png 2020-05-05 13:58:19.752 - info: host.raspberrypi iobroker upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png 2020-05-05 13:58:19.813 - info: host.raspberrypi iobroker upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png 2020-05-05 13:58:19.875 - info: host.raspberrypi iobroker upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json 2020-05-05 13:58:19.939 - info: host.raspberrypi iobroker upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/ru/translations.json i18n/ru/translations.json application/json 2020-05-05 13:58:20.000 - info: host.raspberrypi iobroker upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pt/translations.json i18n/pt/translations.json application/json 2020-05-05 13:58:20.064 - info: host.raspberrypi iobroker upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pl/translations.json i18n/pl/translations.json application/json 2020-05-05 13:58:20.150 - info: host.raspberrypi iobroker upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/nl/translations.json i18n/nl/translations.json application/json 2020-05-05 13:58:20.259 - info: host.raspberrypi iobroker upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/it/translations.json i18n/it/translations.json application/json 2020-05-05 13:58:20.322 - info: host.raspberrypi iobroker upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/fr/translations.json i18n/fr/translations.json application/json 2020-05-05 13:58:20.404 - info: host.raspberrypi iobroker upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/es/translations.json i18n/es/translations.json application/json 2020-05-05 13:58:20.466 - info: host.raspberrypi iobroker upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/en/translations.json i18n/en/translations.json application/json 2020-05-05 13:58:20.533 - info: host.raspberrypi iobroker upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/de/translations.json i18n/de/translations.json application/json 2020-05-05 13:58:20.597 - info: host.raspberrypi iobroker upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript 2020-05-05 13:58:20.685 - info: host.raspberrypi iobroker Update "system.adapter.zigbee.0" 2020-05-05 13:58:20.704 - info: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true) 2020-05-05 13:58:20.706 - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal 2020-05-05 13:58:20.712 - info: zigbee.0 (32715) Got terminate signal TERMINATE_YOURSELF 2020-05-05 13:58:20.715 - info: zigbee.0 (32715) cleaned everything up... 2020-05-05 13:58:20.718 - info: zigbee.0 (32715) Zigbee: disabling joining new devices. 2020-05-05 13:58:20.976 - info: zigbee.0 (32715) terminating 2020-05-05 13:58:20.977 - info: zigbee.0 (32715) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2020-05-05 13:58:21.528 - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2020-05-05 13:58:21.715 - info: host.raspberrypi iobroker exit 0 2020-05-05 13:58:22.082 - info: host.raspberrypi Update repository "latest" under "http://download.iobroker.net/sources-dist-latest.json" 2020-05-05 13:58:23.870 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 15253 2020-05-05 13:58:24.368 - error: host.raspberrypi Caught by controller[0]: /opt/iobroker/node_modules/bindings/bindings.js:121 2020-05-05 13:58:24.368 - error: host.raspberrypi Caught by controller[0]: throw e; 2020-05-05 13:58:24.368 - error: host.raspberrypi Caught by controller[0]: ^ 2020-05-05 13:58:24.369 - error: host.raspberrypi Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node' 2020-05-05 13:58:24.369 - error: host.raspberrypi Caught by controller[0]: was compiled against a different Node.js version using 2020-05-05 13:58:24.369 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 64. This version of Node.js requires 2020-05-05 13:58:24.369 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 72. Please try re-compiling or re-installing 2020-05-05 13:58:24.369 - error: host.raspberrypi Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`). 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1183:18) 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:977:32) 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:877:14) 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1019:19) 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at require (internal/modules/cjs/helpers.js:77:18) 2020-05-05 13:58:24.370 - error: host.raspberrypi Caught by controller[0]: at bindings (/opt/iobroker/node_modules/bindings/bindings.js:112:48) 2020-05-05 13:58:24.371 - error: host.raspberrypi Caught by controller[0]: at Object. (/opt/iobroker/node_modules/@serialport/bindings/lib/linux.js:2:36) 2020-05-05 13:58:24.371 - error: host.raspberrypi Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1133:30) 2020-05-05 13:58:24.371 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1153:10) 2020-05-05 13:58:24.371 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:977:32) 2020-05-05 13:58:24.371 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2020-05-05 13:58:24.372 - info: host.raspberrypi Adapter system.adapter.zigbee.0 needs rebuild and will be restarted afterwards. 2020-05-05 13:58:24.372 - info: host.raspberrypi system.adapter.zigbee.0 will be rebuilt 2020-05-05 13:58:24.373 - warn: host.raspberrypi adapter "zigbee" seems to be installed for a different version of Node.js. Trying to rebuild it... 1 attempt 2020-05-05 13:58:24.373 - info: host.raspberrypi iobroker rebuild zigbee 2020-05-05 13:58:24.906 - info: host.raspberrypi iobroker npm-rebuild: npm rebuild --loglevel error (System call) in "/opt/iobroker/node_modules/iobroker.zigbee" 2020-05-05 13:58:25.959 - info: host.raspberrypi iobroker npm-rebuild: Rebuild zigbee done 2020-05-05 13:58:26.908 - info: host.raspberrypi iobroker npm-rebuild: exit 0 2020-05-05 13:58:26.978 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 15445 2020-05-05 13:58:27.442 - error: host.raspberrypi Caught by controller[0]: /opt/iobroker/node_modules/bindings/bindings.js:121 2020-05-05 13:58:27.443 - error: host.raspberrypi Caught by controller[0]: throw e; 2020-05-05 13:58:27.443 - error: host.raspberrypi Caught by controller[0]: ^ 2020-05-05 13:58:27.443 - error: host.raspberrypi Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node' 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: was compiled against a different Node.js version using 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 64. This version of Node.js requires 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 72. Please try re-compiling or re-installing 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`). 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1183:18) 2020-05-05 13:58:27.444 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:977:32) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:877:14) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1019:19) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at require (internal/modules/cjs/helpers.js:77:18) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at bindings (/opt/iobroker/node_modules/bindings/bindings.js:112:48) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at Object. (/opt/iobroker/node_modules/@serialport/bindings/lib/linux.js:2:36) 2020-05-05 13:58:27.445 - error: host.raspberrypi Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1133:30) 2020-05-05 13:58:27.446 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1153:10) 2020-05-05 13:58:27.446 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:977:32) 2020-05-05 13:58:27.446 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2020-05-05 13:58:27.446 - info: host.raspberrypi Adapter system.adapter.zigbee.0 needs rebuild and will be restarted afterwards. 2020-05-05 13:58:27.447 - info: host.raspberrypi system.adapter.zigbee.0 will be rebuilt 2020-05-05 13:58:27.447 - warn: host.raspberrypi adapter "zigbee" seems to be installed for a different version of Node.js. Trying to rebuild it... 2 attempt 2020-05-05 13:58:27.447 - info: host.raspberrypi iobroker rebuild zigbee --install 2020-05-05 13:58:27.604 - warn: readFile will not read this file (simple-api.png) in future versions: simple-api.admin is not an object of type "meta" 2020-05-05 13:58:27.625 - warn: readFile will not read this file (socketio.png) in future versions: socketio.admin is not an object of type "meta" 2020-05-05 13:58:27.972 - info: host.raspberrypi iobroker npm-rebuild: npm install --loglevel error --production (System call) in "/opt/iobroker/node_modules/iobroker.zigbee" 2020-05-05 13:58:58.428 - info: host.raspberrypi iobroker npm-rebuild: In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast(AsyncExecuteComplete) ^ 2020-05-05 13:58:58.488 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ 2020-05-05 13:58:58.494 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ 2020-05-05 13:58:58.498 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ 2020-05-05 13:58:58.501 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ 2020-05-05 13:58:58.505 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ 2020-05-05 13:58:58.509 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ 2020-05-05 13:58:58.515 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ 2020-05-05 13:58:58.521 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ 2020-05-05 13:58:58.523 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: At global scope:../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local& v8str)) { ^ 2020-05-05 13:58:58.525 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ 2020-05-05 13:58:58.528 - info: host.raspberrypi iobroker npm-rebuild: In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local, v8::Local, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^/home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ 2020-05-05 13:59:01.879 - info: host.raspberrypi iobroker npm-rebuild: In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast(AsyncExecuteComplete) ^ 2020-05-05 13:59:02.221 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2020-05-05 13:59:02.261 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2020-05-05 13:59:03.778 - info: host.raspberrypi iobroker npm-rebuild: In file included from ../src/poller.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast(AsyncExecuteComplete) ^ 2020-05-05 13:59:07.320 - info: host.raspberrypi iobroker npm-rebuild: 2020-05-05 13:59:07.321 - info: host.raspberrypi iobroker npm-rebuild: Rebuild zigbee done 2020-05-05 13:59:08.339 - info: host.raspberrypi iobroker npm-rebuild: exit 0 2020-05-05 13:59:08.426 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 16543 2020-05-05 13:59:09.957 - info: zigbee.0 (16543) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.3, js-controller: 3.0.20 2020-05-05 13:59:09.992 - info: zigbee.0 (16543) Starting Zigbee... 2020-05-05 13:59:11.410 - info: zigbee.0 (16543) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20200211}} 2020-05-05 13:59:11.419 - info: zigbee.0 (16543) --> transmitPower : high 2020-05-05 13:59:11.431 - info: zigbee.0 (16543) Currently 5 devices are joined: 2020-05-05 13:59:11.440 - info: zigbee.0 (16543) 0x00158d0004659dbd (addr 454): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-05-05 13:59:11.442 - info: zigbee.0 (16543) 0x00158d0004208499 (addr 35479): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) 2020-05-05 13:59:11.445 - info: zigbee.0 (16543) 0x84182600000f0c04 (addr 62092): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-05-05 13:59:11.446 - info: zigbee.0 (16543) 0x00158d00042d1b54 (addr 2753): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) 2020-05-05 13:59:11.447 - info: zigbee.0 (16543) 0x00158d0004658581 (addr 12099): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-05-05 13:59:11.448 - info: zigbee.0 (16543) Zigbee started@MichMein sagte in [gelöst] CC2538 + CC2592: Error & SBL-Tool:
was compiled against a different Node.js version using
kommt mir bekannt vor ;) Welche JS-Controller-Version hast du drauf?
UDM Pro, Intel NUC - ioBroker in Proxmox-VM, PiHole+Grafana&Influx+TasmoAdmin in LXCs, Raspberry Pi3 (als CCU), Zigbee-Stick Sonoff, Synology DS918+
-
@MichMein sagte in [gelöst] CC2538 + CC2592: Error & SBL-Tool:
was compiled against a different Node.js version using
kommt mir bekannt vor ;) Welche JS-Controller-Version hast du drauf?
-
@Kueppert
@MichMein sagte in [gelöst] CC2538 + CC2592: Error & SBL-Tool:Installierte Adapter-Version: 1.1.1
Node.js: 12.16.3
js-controller: 3.0.20@MichMein eigentlich hätte mit JS-Controller 3.0.20 ein automatisches rebuild stattfinden müssen. Wenn kein "rebuild" im Log stand, kannst das einfach selbst manuell machen. WO drauf läuft dein ioBroker? Ich hoffe, Linux ^^
-
@MichMein eigentlich hätte mit JS-Controller 3.0.20 ein automatisches rebuild stattfinden müssen. Wenn kein "rebuild" im Log stand, kannst das einfach selbst manuell machen. WO drauf läuft dein ioBroker? Ich hoffe, Linux ^^
@Kueppert ja, mein ioBroker läuft auf nem Raspberrypi4 mit 4GB.
@Garfonso das mit dem rebuild hatte ich gesehen, wusste aber nicht genau ob das alles korrekt war.
Ein Problem gab es, einer meiner Xiaomi Multisensoren hat seit gestern Abend nichts mehr gemeldet gehabt. Ich konnte ihn auch nicht mehr zum senden „animieren“ und habe ihn vorhin gelöscht und neu angelernt, mal schauen wie es jetzt so läuft.
-
@Kueppert ja, mein ioBroker läuft auf nem Raspberrypi4 mit 4GB.
@Garfonso das mit dem rebuild hatte ich gesehen, wusste aber nicht genau ob das alles korrekt war.
Ein Problem gab es, einer meiner Xiaomi Multisensoren hat seit gestern Abend nichts mehr gemeldet gehabt. Ich konnte ihn auch nicht mehr zum senden „animieren“ und habe ihn vorhin gelöscht und neu angelernt, mal schauen wie es jetzt so läuft.
Support us
807
Online32.5k
Users81.7k
Topics1.3m
Posts