NEWS
Blink Camera System
-
dann weiß ich erst einmal nicht weiter - bin auch gerade im Urlaub. Kann mich dazu erst Mitte nächster Woche melden.
@pischleuder Geht klar! Danke!
saeko@raspberrypi:~/blinkpy $ sudo -u iobroker python3 /home/saeko/blinkpy/bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Traceback (most recent call last): File "/home/saeko/blinkpy/bild.py", line 27, in <module> camera.image_to_file(bild) File "/home/saeko/blinkpy/blinkpy/camera.py", line 241, in image_to_file with open(path, "wb") as imgfile: PermissionError: [Errno 13] Permission denied: '/home/saeko/blinkpy/haustuer.jpg' saeko@raspberrypi:~/blinkpy $ sudo -u iobroker sudo python3 /home/saeko/blinkpy/bild.py [sudo] password for iobroker: Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownum den script per iobroker starten zu können, brauch ich sudo, falls das was aussagt. Die anderen Fehlermeldungen kommen vermutlich von der Blink Doorbell, die wohl noch nicht integriert wurde.
-
@exmerci
Hallo zusammen,ich habe es herausgefunden. Im Logfile vom Raspberry (/var/log/syslog) habe ich gesehen, dass das homebridge-blink-for-home plugin eine Abhängigkeit zu homebridge 1.4 hat (im ham-adapter ist 1.3.6 enthalten). Außerdem sieht man einen Absturz des Moduls.
Ich habe daraufhin das Modul in Version 3.7.6 installiert (Checkbox setzen für Aktualisierung beim nächsten Start) und jetzt funktioniert alles.Gruß,
Bernd@speridal sagte in Blink Camera System:
Ich habe daraufhin das Modul in Version 3.7.6 installiert (Checkbox setzen für Aktualisierung beim nächsten Start) und jetzt funktioniert alles.
Gruß,
Bernd@speridal Ich stehe vor der selben Herausforderung ... Wie installiert man denn diese "ältere" Version ? Immer wenn ich homebridge-blink-for-home eingebe, installiert er mir ja die neueste Version 3.9.1
-
@speridal sagte in Blink Camera System:
Ich habe daraufhin das Modul in Version 3.7.6 installiert (Checkbox setzen für Aktualisierung beim nächsten Start) und jetzt funktioniert alles.
Gruß,
Bernd@speridal Ich stehe vor der selben Herausforderung ... Wie installiert man denn diese "ältere" Version ? Immer wenn ich homebridge-blink-for-home eingebe, installiert er mir ja die neueste Version 3.9.1
-
dann weiß ich erst einmal nicht weiter - bin auch gerade im Urlaub. Kann mich dazu erst Mitte nächster Woche melden.
@pischleuder Möchte nicht aufdringlich wirken, aber hätten sie wieder zeit?
-
@pischleuder Möchte nicht aufdringlich wirken, aber hätten sie wieder zeit?
Hi,
versuche doch bitte einmal Dein script in den /opt/iobroker Ordner zu kopieren und starte das
in der Konsole normal, also ohne sudo und poste das Ergebnis. -
Hi,
versuche doch bitte einmal Dein script in den /opt/iobroker Ordner zu kopieren und starte das
in der Konsole normal, also ohne sudo und poste das Ergebnis.@pischleuder Hey,
inzwischen dies hier, aber wahrscheinlich wegen der neuen blink doorbell. bild2 ist ohne json credentials. 1 mit. Ist aber der gleiche text wie im blinkpy ordnersaeko@raspberrypi:/opt/iobroker $ python bild2.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Did not receive valid response from server. Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Haustür {'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 69, 'temperature_c': 20.6, 'temperature_calibrated': 69, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655932081&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'} Türklingel {'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None} Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown saeko@raspberrypi:/opt/iobroker $saeko@raspberrypi:~/blinkpy $ saeko@raspberrypi:~/blinkpy $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown saeko@raspberrypi:~/blinkpy $ python bild2.py python3.8: can't open file 'bild2.py': [Errno 2] No such file or directory saeko@raspberrypi:~/blinkpy $ python bild2.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Did not receive valid response from server. Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Haustür {'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 69, 'temperature_c': 20.6, 'temperature_calibrated': 69, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655932467&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'} Türklingel {'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None} Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown -
@pischleuder Hey,
inzwischen dies hier, aber wahrscheinlich wegen der neuen blink doorbell. bild2 ist ohne json credentials. 1 mit. Ist aber der gleiche text wie im blinkpy ordnersaeko@raspberrypi:/opt/iobroker $ python bild2.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Did not receive valid response from server. Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Haustür {'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 69, 'temperature_c': 20.6, 'temperature_calibrated': 69, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655932081&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'} Türklingel {'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None} Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown saeko@raspberrypi:/opt/iobroker $saeko@raspberrypi:~/blinkpy $ saeko@raspberrypi:~/blinkpy $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown saeko@raspberrypi:~/blinkpy $ python bild2.py python3.8: can't open file 'bild2.py': [Errno 2] No such file or directory saeko@raspberrypi:~/blinkpy $ python bild2.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Did not receive valid response from server. Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Haustür {'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 69, 'temperature_c': 20.6, 'temperature_calibrated': 69, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655932467&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'} Türklingel {'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None} Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownder Aufruf mit python vorab ist falsch, da das im script bereits definiert ist. Das script muss lokal (in /opt/iobroker) so ausgeführt werden:
./bild.pyAusserdem fehlt in Deinem script etwas:
from blinkpy.camera import BlinkCameraAnsonsten muss es sich um ein Rechteproblem des scriptes handeln, oder Du hast blink nicht für den user iobroker richtig installiert, da es mit sudo ja funktioniert. Dieses Problem hatte ich ja auch, wie in Deinem oben genannten Link erwähnt.
Also vergewissere Dich bitte, ob Du das bereits gemacht hast (aus dem blink git Ordner):als normaler user saeko
pip3 install blinkpymit sudo
sudo -H -u iobroker pip3 install blinkpy -
der Aufruf mit python vorab ist falsch, da das im script bereits definiert ist. Das script muss lokal (in /opt/iobroker) so ausgeführt werden:
./bild.pyAusserdem fehlt in Deinem script etwas:
from blinkpy.camera import BlinkCameraAnsonsten muss es sich um ein Rechteproblem des scriptes handeln, oder Du hast blink nicht für den user iobroker richtig installiert, da es mit sudo ja funktioniert. Dieses Problem hatte ich ja auch, wie in Deinem oben genannten Link erwähnt.
Also vergewissere Dich bitte, ob Du das bereits gemacht hast (aus dem blink git Ordner):als normaler user saeko
pip3 install blinkpymit sudo
sudo -H -u iobroker pip3 install blinkpy@pischleuder said in Blink Camera System:
der Aufruf mit python vorab ist falsch, da das im script bereits definiert ist. Das script muss lokal (in /opt/iobroker) so ausgeführt werden:
./bild.pyHabe folgendes probiert (mit python und ohne) und es hat sich leider nichts geändert:
Ausserdem fehlt in Deinem script etwas:
from blinkpy.camera import BlinkCameraZeile wurde jetzt eingefügt.
mein script bis jetzt:
#!/usr/bin/python3 import requests from blinkpy.blinkpy import Blink from blinkpy.auth import Auth from blinkpy.helpers.util import json_load from blinkpy.camera import BlinkCamera blink = Blink() auth = Auth(json_load("/home/saeko/blink/cred.json")) blink.auth = auth blink.start() #auth.send_auth_key(blink, "x") #blink.setup_post_verify() ###### hier den Dateinamen/Pfad eintragen, den das snapshot Bild erhalten soll > bild = './haustuer.jpg' #bild2 = '/home/saeko/blinkpy/Tuerklingel.jpg' #for name, camera in blink.cameras.items(): print(name), print(camera.attribute> #### hier Eure Kamera 1 eintragen und weitere Einträge für mehr Kameras vornehm> camera = blink.cameras['Haustür'] camera.snap_picture() blink.refresh() camera.image_to_file(bild) #payload = {'value':bild} #r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa> #### hier Eure Kamera 2 eintragen und weitere Einträge für mehr Kameras vornehm> #camera = blink.cameras['Türklingel'] #camera.snap_picture() #blink.refresh() #camera.image_to_file(bild2) #payload = {'value':bild} #r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa>Ansonsten muss es sich um ein Rechteproblem des scriptes handeln, oder Du hast blink nicht für den user iobroker richtig installiert, da es mit sudo ja funktioniert. Dieses Problem hatte ich ja auch, wie in Deinem oben genannten Link erwähnt.
Also vergewissere Dich bitte, ob Du das bereits gemacht hast (aus dem blink git Ordner):als normaler user saeko
pip3 install blinkpymit sudo
sudo -H -u iobroker pip3 install blinkpyHatte dies schon installiert, leider auch keine Änderung :/
saeko@raspberrypi:~/blinkpy $ pip3 install blinkpy Defaulting to user installation because normal site-packages is not writeable Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: blinkpy in /home/saeko/.local/lib/python3.8/site-packages (0.20.0.dev0) Requirement already satisfied: requests>=2.24.0 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.27.1) Requirement already satisfied: python-dateutil>=2.8.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.8.2) Requirement already satisfied: python-slugify>=4.0.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (6.1.2) Requirement already satisfied: six>=1.5 in /home/saeko/.local/lib/python3.8/site-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0) Requirement already satisfied: text-unidecode>=1.3 in /home/saeko/.local/lib/python3.8/site-packages (from python-slugify>=4.0.1->blinkpy) (1.3) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (1.26.9) Requirement already satisfied: idna<4,>=2.5 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (3.3) Requirement already satisfied: charset-normalizer~=2.0.0 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2.0.12) Requirement already satisfied: certifi>=2017.4.17 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2022.5.18.1) saeko@raspberrypi:~/blinkpy $ sudo -H -u iobroker pip3 install blinkpy Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: blinkpy in /usr/local/lib/python3.9/dist-packages (0.20.0.dev0) Requirement already satisfied: requests>=2.24.0 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.27.1) Requirement already satisfied: python-slugify>=4.0.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (4.0.1) Requirement already satisfied: python-dateutil>=2.8.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.8.2) Requirement already satisfied: six>=1.5 in /usr/lib/python3/dist-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0) Requirement already satisfied: text-unidecode>=1.3 in /usr/local/lib/python3.9/dist-packages (from python-slugify>=4.0.1->blinkpy) (1.3) Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2.10) Requirement already satisfied: charset-normalizer~=2.0.0 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (2.0.12) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (1.25.11) Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2020.6.20) saeko@raspberrypi:~/blinkpy $Normaler aufruf per Konsole:
saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownPer iobroker aufruf
sudo -u iobroker python3 ./bild.pykommt nun folgendes:saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py Traceback (most recent call last): File "/opt/iobroker/./bild.py", line 4, in <module> from blinkpy.blinkpy import Blink ModuleNotFoundError: No module named 'blinkpy' -
@pischleuder said in Blink Camera System:
der Aufruf mit python vorab ist falsch, da das im script bereits definiert ist. Das script muss lokal (in /opt/iobroker) so ausgeführt werden:
./bild.pyHabe folgendes probiert (mit python und ohne) und es hat sich leider nichts geändert:
Ausserdem fehlt in Deinem script etwas:
from blinkpy.camera import BlinkCameraZeile wurde jetzt eingefügt.
mein script bis jetzt:
#!/usr/bin/python3 import requests from blinkpy.blinkpy import Blink from blinkpy.auth import Auth from blinkpy.helpers.util import json_load from blinkpy.camera import BlinkCamera blink = Blink() auth = Auth(json_load("/home/saeko/blink/cred.json")) blink.auth = auth blink.start() #auth.send_auth_key(blink, "x") #blink.setup_post_verify() ###### hier den Dateinamen/Pfad eintragen, den das snapshot Bild erhalten soll > bild = './haustuer.jpg' #bild2 = '/home/saeko/blinkpy/Tuerklingel.jpg' #for name, camera in blink.cameras.items(): print(name), print(camera.attribute> #### hier Eure Kamera 1 eintragen und weitere Einträge für mehr Kameras vornehm> camera = blink.cameras['Haustür'] camera.snap_picture() blink.refresh() camera.image_to_file(bild) #payload = {'value':bild} #r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa> #### hier Eure Kamera 2 eintragen und weitere Einträge für mehr Kameras vornehm> #camera = blink.cameras['Türklingel'] #camera.snap_picture() #blink.refresh() #camera.image_to_file(bild2) #payload = {'value':bild} #r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa>Ansonsten muss es sich um ein Rechteproblem des scriptes handeln, oder Du hast blink nicht für den user iobroker richtig installiert, da es mit sudo ja funktioniert. Dieses Problem hatte ich ja auch, wie in Deinem oben genannten Link erwähnt.
Also vergewissere Dich bitte, ob Du das bereits gemacht hast (aus dem blink git Ordner):als normaler user saeko
pip3 install blinkpymit sudo
sudo -H -u iobroker pip3 install blinkpyHatte dies schon installiert, leider auch keine Änderung :/
saeko@raspberrypi:~/blinkpy $ pip3 install blinkpy Defaulting to user installation because normal site-packages is not writeable Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: blinkpy in /home/saeko/.local/lib/python3.8/site-packages (0.20.0.dev0) Requirement already satisfied: requests>=2.24.0 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.27.1) Requirement already satisfied: python-dateutil>=2.8.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.8.2) Requirement already satisfied: python-slugify>=4.0.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (6.1.2) Requirement already satisfied: six>=1.5 in /home/saeko/.local/lib/python3.8/site-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0) Requirement already satisfied: text-unidecode>=1.3 in /home/saeko/.local/lib/python3.8/site-packages (from python-slugify>=4.0.1->blinkpy) (1.3) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (1.26.9) Requirement already satisfied: idna<4,>=2.5 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (3.3) Requirement already satisfied: charset-normalizer~=2.0.0 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2.0.12) Requirement already satisfied: certifi>=2017.4.17 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2022.5.18.1) saeko@raspberrypi:~/blinkpy $ sudo -H -u iobroker pip3 install blinkpy Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: blinkpy in /usr/local/lib/python3.9/dist-packages (0.20.0.dev0) Requirement already satisfied: requests>=2.24.0 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.27.1) Requirement already satisfied: python-slugify>=4.0.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (4.0.1) Requirement already satisfied: python-dateutil>=2.8.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.8.2) Requirement already satisfied: six>=1.5 in /usr/lib/python3/dist-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0) Requirement already satisfied: text-unidecode>=1.3 in /usr/local/lib/python3.9/dist-packages (from python-slugify>=4.0.1->blinkpy) (1.3) Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2.10) Requirement already satisfied: charset-normalizer~=2.0.0 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (2.0.12) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (1.25.11) Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2020.6.20) saeko@raspberrypi:~/blinkpy $Normaler aufruf per Konsole:
saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownPer iobroker aufruf
sudo -u iobroker python3 ./bild.pykommt nun folgendes:saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py Traceback (most recent call last): File "/opt/iobroker/./bild.py", line 4, in <module> from blinkpy.blinkpy import Blink ModuleNotFoundError: No module named 'blinkpy'Jep, du rufst das script mit dem json parameter auf und das wird nicht akzeptiert
Warum?
Was steht da drin ? --> Username und Passwort ? -
Jep, du rufst das script mit dem json parameter auf und das wird nicht akzeptiert
Warum?
Was steht da drin ? --> Username und Passwort ?@pischleuder
meinst duauth = Auth(json_load("/home/saeko/blink/cred.json"))da stehen die Kontodaten drin. Ich probiers mal ohne. sollte sich aber eigentlich nichts ändern
Was steht da drin ? --> Username und Passwort ?
japp
-
@pischleuder said in Blink Camera System:
der Aufruf mit python vorab ist falsch, da das im script bereits definiert ist. Das script muss lokal (in /opt/iobroker) so ausgeführt werden:
./bild.pyHabe folgendes probiert (mit python und ohne) und es hat sich leider nichts geändert:
Ausserdem fehlt in Deinem script etwas:
from blinkpy.camera import BlinkCameraZeile wurde jetzt eingefügt.
mein script bis jetzt:
#!/usr/bin/python3 import requests from blinkpy.blinkpy import Blink from blinkpy.auth import Auth from blinkpy.helpers.util import json_load from blinkpy.camera import BlinkCamera blink = Blink() auth = Auth(json_load("/home/saeko/blink/cred.json")) blink.auth = auth blink.start() #auth.send_auth_key(blink, "x") #blink.setup_post_verify() ###### hier den Dateinamen/Pfad eintragen, den das snapshot Bild erhalten soll > bild = './haustuer.jpg' #bild2 = '/home/saeko/blinkpy/Tuerklingel.jpg' #for name, camera in blink.cameras.items(): print(name), print(camera.attribute> #### hier Eure Kamera 1 eintragen und weitere Einträge für mehr Kameras vornehm> camera = blink.cameras['Haustür'] camera.snap_picture() blink.refresh() camera.image_to_file(bild) #payload = {'value':bild} #r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa> #### hier Eure Kamera 2 eintragen und weitere Einträge für mehr Kameras vornehm> #camera = blink.cameras['Türklingel'] #camera.snap_picture() #blink.refresh() #camera.image_to_file(bild2) #payload = {'value':bild} #r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa>Ansonsten muss es sich um ein Rechteproblem des scriptes handeln, oder Du hast blink nicht für den user iobroker richtig installiert, da es mit sudo ja funktioniert. Dieses Problem hatte ich ja auch, wie in Deinem oben genannten Link erwähnt.
Also vergewissere Dich bitte, ob Du das bereits gemacht hast (aus dem blink git Ordner):als normaler user saeko
pip3 install blinkpymit sudo
sudo -H -u iobroker pip3 install blinkpyHatte dies schon installiert, leider auch keine Änderung :/
saeko@raspberrypi:~/blinkpy $ pip3 install blinkpy Defaulting to user installation because normal site-packages is not writeable Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: blinkpy in /home/saeko/.local/lib/python3.8/site-packages (0.20.0.dev0) Requirement already satisfied: requests>=2.24.0 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.27.1) Requirement already satisfied: python-dateutil>=2.8.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.8.2) Requirement already satisfied: python-slugify>=4.0.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (6.1.2) Requirement already satisfied: six>=1.5 in /home/saeko/.local/lib/python3.8/site-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0) Requirement already satisfied: text-unidecode>=1.3 in /home/saeko/.local/lib/python3.8/site-packages (from python-slugify>=4.0.1->blinkpy) (1.3) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (1.26.9) Requirement already satisfied: idna<4,>=2.5 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (3.3) Requirement already satisfied: charset-normalizer~=2.0.0 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2.0.12) Requirement already satisfied: certifi>=2017.4.17 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2022.5.18.1) saeko@raspberrypi:~/blinkpy $ sudo -H -u iobroker pip3 install blinkpy Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: blinkpy in /usr/local/lib/python3.9/dist-packages (0.20.0.dev0) Requirement already satisfied: requests>=2.24.0 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.27.1) Requirement already satisfied: python-slugify>=4.0.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (4.0.1) Requirement already satisfied: python-dateutil>=2.8.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.8.2) Requirement already satisfied: six>=1.5 in /usr/lib/python3/dist-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0) Requirement already satisfied: text-unidecode>=1.3 in /usr/local/lib/python3.9/dist-packages (from python-slugify>=4.0.1->blinkpy) (1.3) Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2.10) Requirement already satisfied: charset-normalizer~=2.0.0 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (2.0.12) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (1.25.11) Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2020.6.20) saeko@raspberrypi:~/blinkpy $Normaler aufruf per Konsole:
saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownPer iobroker aufruf
sudo -u iobroker python3 ./bild.pykommt nun folgendes:saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py Traceback (most recent call last): File "/opt/iobroker/./bild.py", line 4, in <module> from blinkpy.blinkpy import Blink ModuleNotFoundError: No module named 'blinkpy'@soukai sagte in Blink Camera System:
Per iobroker aufruf
sudo -u iobroker python3 ./bild.pykommt nun folgendes:saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py Traceback (most recent call last): File "/opt/iobroker/./bild.py", line 4, in <module> from blinkpy.blinkpy import Blink ModuleNotFoundError: No module named 'blinkpy'Wie gesagt, das ist komplett falsch und Du solltest das aus Deinen Gedanken streichen :-)
-
@pischleuder said in Blink Camera System:
der Aufruf mit python vorab ist falsch, da das im script bereits definiert ist. Das script muss lokal (in /opt/iobroker) so ausgeführt werden:
./bild.pyHabe folgendes probiert (mit python und ohne) und es hat sich leider nichts geändert:
Ausserdem fehlt in Deinem script etwas:
from blinkpy.camera import BlinkCameraZeile wurde jetzt eingefügt.
mein script bis jetzt:
#!/usr/bin/python3 import requests from blinkpy.blinkpy import Blink from blinkpy.auth import Auth from blinkpy.helpers.util import json_load from blinkpy.camera import BlinkCamera blink = Blink() auth = Auth(json_load("/home/saeko/blink/cred.json")) blink.auth = auth blink.start() #auth.send_auth_key(blink, "x") #blink.setup_post_verify() ###### hier den Dateinamen/Pfad eintragen, den das snapshot Bild erhalten soll > bild = './haustuer.jpg' #bild2 = '/home/saeko/blinkpy/Tuerklingel.jpg' #for name, camera in blink.cameras.items(): print(name), print(camera.attribute> #### hier Eure Kamera 1 eintragen und weitere Einträge für mehr Kameras vornehm> camera = blink.cameras['Haustür'] camera.snap_picture() blink.refresh() camera.image_to_file(bild) #payload = {'value':bild} #r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa> #### hier Eure Kamera 2 eintragen und weitere Einträge für mehr Kameras vornehm> #camera = blink.cameras['Türklingel'] #camera.snap_picture() #blink.refresh() #camera.image_to_file(bild2) #payload = {'value':bild} #r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa>Ansonsten muss es sich um ein Rechteproblem des scriptes handeln, oder Du hast blink nicht für den user iobroker richtig installiert, da es mit sudo ja funktioniert. Dieses Problem hatte ich ja auch, wie in Deinem oben genannten Link erwähnt.
Also vergewissere Dich bitte, ob Du das bereits gemacht hast (aus dem blink git Ordner):als normaler user saeko
pip3 install blinkpymit sudo
sudo -H -u iobroker pip3 install blinkpyHatte dies schon installiert, leider auch keine Änderung :/
saeko@raspberrypi:~/blinkpy $ pip3 install blinkpy Defaulting to user installation because normal site-packages is not writeable Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: blinkpy in /home/saeko/.local/lib/python3.8/site-packages (0.20.0.dev0) Requirement already satisfied: requests>=2.24.0 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.27.1) Requirement already satisfied: python-dateutil>=2.8.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.8.2) Requirement already satisfied: python-slugify>=4.0.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (6.1.2) Requirement already satisfied: six>=1.5 in /home/saeko/.local/lib/python3.8/site-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0) Requirement already satisfied: text-unidecode>=1.3 in /home/saeko/.local/lib/python3.8/site-packages (from python-slugify>=4.0.1->blinkpy) (1.3) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (1.26.9) Requirement already satisfied: idna<4,>=2.5 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (3.3) Requirement already satisfied: charset-normalizer~=2.0.0 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2.0.12) Requirement already satisfied: certifi>=2017.4.17 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2022.5.18.1) saeko@raspberrypi:~/blinkpy $ sudo -H -u iobroker pip3 install blinkpy Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: blinkpy in /usr/local/lib/python3.9/dist-packages (0.20.0.dev0) Requirement already satisfied: requests>=2.24.0 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.27.1) Requirement already satisfied: python-slugify>=4.0.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (4.0.1) Requirement already satisfied: python-dateutil>=2.8.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.8.2) Requirement already satisfied: six>=1.5 in /usr/lib/python3/dist-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0) Requirement already satisfied: text-unidecode>=1.3 in /usr/local/lib/python3.9/dist-packages (from python-slugify>=4.0.1->blinkpy) (1.3) Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2.10) Requirement already satisfied: charset-normalizer~=2.0.0 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (2.0.12) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (1.25.11) Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2020.6.20) saeko@raspberrypi:~/blinkpy $Normaler aufruf per Konsole:
saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownPer iobroker aufruf
sudo -u iobroker python3 ./bild.pykommt nun folgendes:saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py Traceback (most recent call last): File "/opt/iobroker/./bild.py", line 4, in <module> from blinkpy.blinkpy import Blink ModuleNotFoundError: No module named 'blinkpy'Normaler aufruf per Konsole:
saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownDieser Aufruf wird nur mit ./bild.py gemacht, weil die Definition bereits für python im script ist und zwar mit
#!/usr/bin/python3 -
Normaler aufruf per Konsole:
saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownDieser Aufruf wird nur mit ./bild.py gemacht, weil die Definition bereits für python im script ist und zwar mit
#!/usr/bin/python3ggf. einmal dieses script erstellen und laufen lassen:
#!/usr/bin/python3 ###### zuerst ein pip3 install request ausführen, wenn nicht bereits installiert ##### import requests import time #from pushover import init, Client from blinkpy.blinkpy import Blink from blinkpy.auth import Auth from blinkpy.camera import BlinkCamera blink = Blink() auth = Auth({"username": "E-Mail", "password": "Passwort"}, no_prompt=True) blink.auth = auth blink.start() auth.send_auth_key(blink, "hier blink key") blink.setup_post_verify() for name, camera in blink.cameras.items(): print(name), print(camera.attributes)Nicht das bei den / der Kamera was nicht stimmt.
-
ggf. einmal dieses script erstellen und laufen lassen:
#!/usr/bin/python3 ###### zuerst ein pip3 install request ausführen, wenn nicht bereits installiert ##### import requests import time #from pushover import init, Client from blinkpy.blinkpy import Blink from blinkpy.auth import Auth from blinkpy.camera import BlinkCamera blink = Blink() auth = Auth({"username": "E-Mail", "password": "Passwort"}, no_prompt=True) blink.auth = auth blink.start() auth.send_auth_key(blink, "hier blink key") blink.setup_post_verify() for name, camera in blink.cameras.items(): print(name), print(camera.attributes)Nicht das bei den / der Kamera was nicht stimmt.
@pischleuder said in Blink Camera System:
ggf. einmal dieses script erstellen und laufen lassen:
#!/usr/bin/python3 ###### zuerst ein pip3 install request ausführen, wenn nicht bereits installiert ##### import requests import time #from pushover import init, Client from blinkpy.blinkpy import Blink from blinkpy.auth import Auth from blinkpy.camera import BlinkCamera blink = Blink() auth = Auth({"username": "E-Mail", "password": "Passwort"}, no_prompt=True) blink.auth = auth blink.start() auth.send_auth_key(blink, "hier blink key") blink.setup_post_verify() for name, camera in blink.cameras.items(): print(name), print(camera.attributes)Nicht das bei den / der Kamera was nicht stimmt.
Das kam dabei raus:
saeko@raspberrypi:/opt/iobroker $ python bildneu.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Did not receive valid response from server. Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Haustür {'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 102, 'temperature_c': 38.9, 'temperature_calibrated': 102, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655982587&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'} Türklingel {'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None}Das json zu streichen hat auch nichts neues gebracht.
Das kommt von der Konsole wenn ichs streich. Wahrscheinlich nicht wichtig aber ich schicks mal.saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown@pischleuder said in Blink Camera System:
@soukai sagte in Blink Camera System:
Per iobroker aufruf
sudo -u iobroker python3 ./bild.pykommt nun folgendes:saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py Traceback (most recent call last): File "/opt/iobroker/./bild.py", line 4, in <module> from blinkpy.blinkpy import Blink ModuleNotFoundError: No module named 'blinkpy'Wie gesagt, das ist komplett falsch und Du solltest das aus Deinen Gedanken streichen :-)
Nagut :no_mouth:
@pischleuder said in Blink Camera System:
Normaler aufruf per Konsole:
saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownDieser Aufruf wird nur mit ./bild.py gemacht, weil die Definition bereits für python im script ist und zwar mit
#!/usr/bin/python3Meinst du in der Konsole oder in Iobroker dann? habe das mal versuchshalber ausprobiert in der Konsole und in iobroker:
./bild.py
aber konnte nicht aufgerufen werden. Habe auch das "#" entfernt probeweise im Script. Keine Änderung.kommt folgendes in Konsole:
saeko@raspberrypi:/opt/iobroker $ sudo ./bild.py sudo: ./bild.py: command not found saeko@raspberrypi:/opt/iobroker $ ./bild.py -bash: ./bild.py: Permission denied -
@pischleuder said in Blink Camera System:
ggf. einmal dieses script erstellen und laufen lassen:
#!/usr/bin/python3 ###### zuerst ein pip3 install request ausführen, wenn nicht bereits installiert ##### import requests import time #from pushover import init, Client from blinkpy.blinkpy import Blink from blinkpy.auth import Auth from blinkpy.camera import BlinkCamera blink = Blink() auth = Auth({"username": "E-Mail", "password": "Passwort"}, no_prompt=True) blink.auth = auth blink.start() auth.send_auth_key(blink, "hier blink key") blink.setup_post_verify() for name, camera in blink.cameras.items(): print(name), print(camera.attributes)Nicht das bei den / der Kamera was nicht stimmt.
Das kam dabei raus:
saeko@raspberrypi:/opt/iobroker $ python bildneu.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Did not receive valid response from server. Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Haustür {'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 102, 'temperature_c': 38.9, 'temperature_calibrated': 102, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655982587&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'} Türklingel {'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None}Das json zu streichen hat auch nichts neues gebracht.
Das kommt von der Konsole wenn ichs streich. Wahrscheinlich nicht wichtig aber ich schicks mal.saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown@pischleuder said in Blink Camera System:
@soukai sagte in Blink Camera System:
Per iobroker aufruf
sudo -u iobroker python3 ./bild.pykommt nun folgendes:saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py Traceback (most recent call last): File "/opt/iobroker/./bild.py", line 4, in <module> from blinkpy.blinkpy import Blink ModuleNotFoundError: No module named 'blinkpy'Wie gesagt, das ist komplett falsch und Du solltest das aus Deinen Gedanken streichen :-)
Nagut :no_mouth:
@pischleuder said in Blink Camera System:
Normaler aufruf per Konsole:
saeko@raspberrypi:/opt/iobroker $ python bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownDieser Aufruf wird nur mit ./bild.py gemacht, weil die Definition bereits für python im script ist und zwar mit
#!/usr/bin/python3Meinst du in der Konsole oder in Iobroker dann? habe das mal versuchshalber ausprobiert in der Konsole und in iobroker:
./bild.py
aber konnte nicht aufgerufen werden. Habe auch das "#" entfernt probeweise im Script. Keine Änderung.kommt folgendes in Konsole:
saeko@raspberrypi:/opt/iobroker $ sudo ./bild.py sudo: ./bild.py: command not found saeko@raspberrypi:/opt/iobroker $ ./bild.py -bash: ./bild.py: Permission deniedServus,
also nochmal : lass alles ! mit sudo und python davorgestellt weg, sowohl in der Konsole (Terminal) als auch im iobroker blockly
Ist das script ausführbar gemacht mit chmod 755 scriptname ?
Im script lässt du die Zeile mit python bitte genau so stehen, wie ich es gepostet hatte.
mach mal bitte ein ls -ldh bild.py und poste das Ergebnis. -
Servus,
also nochmal : lass alles ! mit sudo und python davorgestellt weg, sowohl in der Konsole (Terminal) als auch im iobroker blockly
Ist das script ausführbar gemacht mit chmod 755 scriptname ?
Im script lässt du die Zeile mit python bitte genau so stehen, wie ich es gepostet hatte.
mach mal bitte ein ls -ldh bild.py und poste das Ergebnis.also nochmal : lass alles ! mit sudo und python davorgestellt weg, sowohl in der Konsole (Terminal) als auch im iobroker blockly
Danke für deine Geduld! Habs jetzt wie du sagtest geändert. Rechte sind geändert und script läuft. Jedoch streikt er aber bei deinem Script, warum auch immer :/
saeko@raspberrypi:/opt/iobroker $ chmod 755 bildneu.py saeko@raspberrypi:/opt/iobroker $ ./bildneu.py -bash: ./bildneu.py: /usr/bin/python3^M: bad interpreter: No such file or directory saeko@raspberrypi:/opt/iobroker $ chmod 755 bild.py saeko@raspberrypi:/opt/iobroker $ ./bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownHier ein das Ergebnis von ls -ldh bild.py und bildneu.py (dein script):
saeko@raspberrypi:/opt/iobroker $ ls -ldh bild.py -rwxr-xr-x+ 1 saeko saeko 1.3K Jun 23 13:21 bild.py saeko@raspberrypi:/opt/iobroker $ ls -ldh bildneu.py -rwxr-xr-x+ 1 saeko saeko 612 Jun 24 14:48 bildneu.py -
also nochmal : lass alles ! mit sudo und python davorgestellt weg, sowohl in der Konsole (Terminal) als auch im iobroker blockly
Danke für deine Geduld! Habs jetzt wie du sagtest geändert. Rechte sind geändert und script läuft. Jedoch streikt er aber bei deinem Script, warum auch immer :/
saeko@raspberrypi:/opt/iobroker $ chmod 755 bildneu.py saeko@raspberrypi:/opt/iobroker $ ./bildneu.py -bash: ./bildneu.py: /usr/bin/python3^M: bad interpreter: No such file or directory saeko@raspberrypi:/opt/iobroker $ chmod 755 bild.py saeko@raspberrypi:/opt/iobroker $ ./bild.py Could not extract camera info: {'message': 'Camera not found', 'code': 500} Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknown Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable Could not extract camera info: None Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable Could not retrieve calibrated temperature. Could not find thumbnail for camera unknownHier ein das Ergebnis von ls -ldh bild.py und bildneu.py (dein script):
saeko@raspberrypi:/opt/iobroker $ ls -ldh bild.py -rwxr-xr-x+ 1 saeko saeko 1.3K Jun 23 13:21 bild.py saeko@raspberrypi:/opt/iobroker $ ls -ldh bildneu.py -rwxr-xr-x+ 1 saeko saeko 612 Jun 24 14:48 bildneu.py@soukai sagte in Blink Camera System:
also nochmal : lass alles ! mit sudo und python davorgestellt weg, sowohl in der Konsole (Terminal) als auch im iobroker blockly
Danke für deine Geduld! Habs jetzt wie du sagtest geändert. Rechte sind geändert und script läuft. Jedoch streikt er aber bei deinem Script, warum auch immer :/
Weil Du offensichtlich python3 nicht installiert hast , sondern nur python :-)
Hier ein das Ergebnis von ls -ldh bild.py und bildneu.py (dein script):
saeko@raspberrypi:/opt/iobroker $ ls -ldh bild.py -rwxr-xr-x+ 1 saeko saeko 1.3K Jun 23 13:21 bild.py saeko@raspberrypi:/opt/iobroker $ ls -ldh bildneu.py -rwxr-xr-x+ 1 saeko saeko 612 Jun 24 14:48 bildneu.pyJep, jetzt sieht man auch, warum das script aus blockly nicht ausgeführt wird. Die Rechte müssen auf iobroker sein. Bei mir sieht das so aus:
-rwxrwxrwx+ 1 iobroker iobroker 1,7K Apr 6 15:41 blink-cameras.py pi@raspberrypi2:/opt/iobroker $ -
@soukai sagte in Blink Camera System:
also nochmal : lass alles ! mit sudo und python davorgestellt weg, sowohl in der Konsole (Terminal) als auch im iobroker blockly
Danke für deine Geduld! Habs jetzt wie du sagtest geändert. Rechte sind geändert und script läuft. Jedoch streikt er aber bei deinem Script, warum auch immer :/
Weil Du offensichtlich python3 nicht installiert hast , sondern nur python :-)
Hier ein das Ergebnis von ls -ldh bild.py und bildneu.py (dein script):
saeko@raspberrypi:/opt/iobroker $ ls -ldh bild.py -rwxr-xr-x+ 1 saeko saeko 1.3K Jun 23 13:21 bild.py saeko@raspberrypi:/opt/iobroker $ ls -ldh bildneu.py -rwxr-xr-x+ 1 saeko saeko 612 Jun 24 14:48 bildneu.pyJep, jetzt sieht man auch, warum das script aus blockly nicht ausgeführt wird. Die Rechte müssen auf iobroker sein. Bei mir sieht das so aus:
-rwxrwxrwx+ 1 iobroker iobroker 1,7K Apr 6 15:41 blink-cameras.py pi@raspberrypi2:/opt/iobroker $@pischleuder
ist das nicht python 3?saeko@raspberrypi:/opt/iobroker $ python --version Python 3.8.4hoffentlich ist es das D: kannst mir vielleicht eben sagen wie ich die Rechte auf iobroker änder?
-
@pischleuder
ist das nicht python 3?saeko@raspberrypi:/opt/iobroker $ python --version Python 3.8.4hoffentlich ist es das D: kannst mir vielleicht eben sagen wie ich die Rechte auf iobroker änder?
-
saeko@raspberrypi:/opt/iobroker $ ls -ldh bild.py -rwxr-xr-x+ 1 iobroker saeko 1.3K Jun 23 13:21 bild.py
Support us
573
Online32.6k
Users82.1k
Topics1.3m
Posts