Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[muckel]

ich habe nur oben stehende befehle ausgeführt.

den fixer hab ich schon laufen lassen.

jetzt kommt allerdings keine fehlermeldung mehr aber iobroker startet trotzdem nicht.

[Homoran]

@muckel

iobroker list instances

Und

iobroker Status

[muckel]

erich@SmartHome:/opt/iobroker$ iobroker list instances
  system.adapter.admin.0                 : admin       -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                : alexa2      -  enabled
  system.adapter.amazon-dash.0           : amazon-dash -  enabled
  system.adapter.backitup.0              : backitup    -  enabled
  system.adapter.cloud.0                 : cloud       -  enabled
  system.adapter.deconz.0                : deconz      -  enabled, port: 80
  system.adapter.enigma2.0               : enigma2     -  enabled
  system.adapter.feiertage.0             : feiertage   -  enabled
  system.adapter.gardena.0               : gardena     -  enabled
  system.adapter.geofency.0              : geofency    -  enabled, port: 7999
  system.adapter.ham.0                   : ham         -  enabled
  system.adapter.harmony.0               : harmony     -  enabled
  system.adapter.history.0               : history     -  enabled
  system.adapter.hm-rega.0               : hm-rega     -  enabled
  system.adapter.hm-rpc.0                : hm-rpc      -  enabled, port: 0
  system.adapter.hm-rpc.1                : hm-rpc      -  enabled, port: 1
  system.adapter.hs100.0                 : hs100       -  enabled
  system.adapter.hue.0                   : hue         -  enabled, port: 80
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png -  enabled
  system.adapter.icons-fatcow-hosting.0  : icons-fatcow-hosting -  enabled
  system.adapter.icons-icons8.0          : icons-icons8 -  enabled
  system.adapter.icons-material-png.0    : icons-material-png -  enabled
  system.adapter.icons-mfd-png.0         : icons-mfd-png -  enabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png -  enabled
  system.adapter.icons-ultimate-png.0    : icons-ultimate-png -  enabled
  system.adapter.info.0                  : info        -  enabled
  system.adapter.iot.0                   : iot         -  enabled
  system.adapter.iqontrol.0              : iqontrol    -  enabled
  system.adapter.javascript.0            : javascript  -  enabled
  system.adapter.material.0              : material    -  enabled
  system.adapter.maxcube.0               : maxcube     -  enabled, port: 62910, bind: 0.0.0.0
  system.adapter.mihome-vacuum.0         : mihome-vacuum -  enabled, port: 54321
  system.adapter.mihome.0                : mihome      -  enabled, port: 9898, bind: 0.0.0.0
  system.adapter.mobile.0                : mobile      -  enabled
  system.adapter.moma.0                  : moma        -  enabled
  system.adapter.netatmo.0               : netatmo     -  enabled
  system.adapter.node-red.0              : node-red    -  enabled, port: 1880, bind: 0.0.0.0
  system.adapter.nuc.0                   : nuc         -  enabled
  system.adapter.nuki.0                  : nuki        -  enabled
  system.adapter.octoprint.0             : octoprint   -  enabled
  system.adapter.pushover.0              : pushover    -  enabled
  system.adapter.radar2.0                : radar2      -  enabled
  system.adapter.rflink.0                : rflink      -  enabled
  system.adapter.rickshaw.0              : rickshaw    -  enabled
  system.adapter.sayit.0                 : sayit       -  enabled, port: 0
  system.adapter.sayit.1                 : sayit       -  enabled, port: 0
  system.adapter.sayit.2                 : sayit       -  enabled, port: 0
  system.adapter.scenes.0                : scenes      -  enabled
  system.adapter.scriptgui.0             : scriptgui   -  enabled, port: 8090, bind: 0.0.0.0, run as: admin
  system.adapter.socketio.0              : socketio    -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
  system.adapter.sonoff.0                : sonoff      -  enabled, port: 1500, bind: 0.0.0.0
  system.adapter.sonoff.1                : sonoff      -  enabled, port: 1501, bind: 0.0.0.0
  system.adapter.sonos.0                 : sonos       -  enabled
  system.adapter.sourceanalytix.0        : sourceanalytix -  enabled
  system.adapter.ubuntu.0                : ubuntu      -  enabled
  system.adapter.virtualpowermeter.0     : virtualpowermeter -  enabled
  system.adapter.vis-hqwidgets.0         : vis-hqwidgets -  enabled
  system.adapter.vis-justgage.0          : vis-justgage -  enabled
  system.adapter.vis-material.0          : vis-material -  enabled
  system.adapter.vis-metro.0             : vis-metro   -  enabled
  system.adapter.vis-timeandweather.0    : vis-timeandweather -  enabled
  system.adapter.vis.0                   : vis         -  enabled
  system.adapter.weatherunderground.0    : weatherunderground -  enabled
  system.adapter.web.0                   : web         -  enabled, port: 8086, bind: 0.0.0.0, run as: admin
  system.adapter.yahka.0                 : yahka       -  enabled

+ instance is alive

erich@SmartHome:/opt/iobroker$ sudo iobroker status
iobroker is not running

Objects type: file
States  type: file

[Homoran]

@muckel

iobroker start
iobroker Status

Code bitte in Code tags

[muckel]

hab ich vergessen, sorry

erich@SmartHome:/opt/iobroker$ iobroker start
erich@SmartHome:/opt/iobroker$ iobroker status
iobroker is not running

Objects type: file
States  type: file
erich@SmartHome:/opt/iobroker$

[Homoran]

@muckel sagte in IOBroker startet nach update auf jscontroller *.*.11 nicht:

hab ich vergessen, sorry

Ist am Handy sonst nicht zu entziffern.

Mach Mal bitte einen reboot

[muckel]

hab ich schon mehrmals gemacht.
nutzt nichts.

[Homoran]

@muckel

iobroker update

[muckel]

erich@SmartHome:/opt/iobroker$ sudo iobroker update
Used repository: latest
hash not changed, use actual sources
update done
Adapter    "admin"         : 3.6.2    , installed 3.6.2
Adapter    "admin-2"       : 2.0.10
Adapter    "alexa2"        : 1.1.3    , installed 1.1.3
Adapter    "alpha2"        : 0.0.4
Adapter    "amazon-dash"   : 0.3.1    , installed 0.3.1
Adapter    "artnet"        : 1.0.0
Adapter    "asterisk"      : 1.0.6
Adapter    "asuswrt"       : 1.0.1
Adapter    "b-control-em"  : 0.2.1
Adapter    "backitup"      : 1.1.4    , installed 1.1.4
Adapter    "beckhoff"      : 1.0.2
Adapter    "benq"          : 0.2.0
Adapter    "ble"           : 0.7.3
Adapter    "bmw"           : 1.4.0
Adapter    "boblight"      : 0.0.1
Adapter    "bosesoundtouch": 0.2.4
Adapter    "botvac"        : 1.0.0
Adapter    "bring"         : 1.3.4
Adapter    "broadlink2"    : 2.0.0
Adapter    "chromecast"    : 2.2.3    , installed 2.2.3
Adapter    "cloud"         : 2.6.2    , installed 2.6.2
Adapter    "comfoair"      : 0.3.0
Adapter    "contactid"     : 1.0.0
Adapter    "corrently"     : 0.0.2
Adapter    "cul"           : 1.0.0    , installed 1.0.0
Adapter    "daikin"        : 1.0.3
Adapter    "daswetter"     : 2.8.0    , installed 2.8.0
Adapter    "deconz"        : 1.1.2    , installed 1.1.2
Adapter    "denon"         : 1.5.1
Adapter    "discovergy"    : 0.4.0
Adapter    "discovery"     : 2.0.0    , installed 2.0.0
Adapter    "doorbird"      : 0.1.5
Adapter    "dwd"           : 2.4.3    , installed 2.4.3
Adapter    "ebus"          : 0.8.0
Adapter    "egigeozone"    : 0.1.2
Adapter    "ekey"          : 1.0.0
Adapter    "email"         : 1.0.4
Adapter    "emby"          : 0.1.2
Adapter    "energymanager" : 1.2.1
Adapter    "enet"          : 1.0.1
Adapter    "epson_stylus_px830": 0.2.1
Adapter    "fakeroku"      : 0.2.1    , installed 0.2.1
Adapter    "feiertage"     : 1.0.11   , installed 1.0.11
Adapter    "fhem"          : 1.2.0    , installed 1.2.0
Adapter    "find-my-iphone": 0.2.17
Adapter    "firetv"        : 0.0.33   , installed 0.0.33
Adapter    "flot"          : 1.9.2    , installed 1.9.2
Adapter    "foobar2000"    : 1.0.0
Adapter    "fritzbox"      : 0.2.1
Adapter    "fritzdect"     : 0.2.1
Adapter    "fronius"       : 1.0.5
Adapter    "fullcalendar"  : 0.2.4
Adapter    "fullybrowser"  : 1.0.0
Adapter    "g-homa"        : 0.4.0
Adapter    "geofency"      : 0.3.2    , installed 0.3.2
Adapter    "gruenbeck"     : 0.0.12
Adapter    "habpanel"      : 0.3.4
Adapter    "haier"         : 1.0.2
Adapter    "ham"           : 1.0.0    , installed 1.0.0
Adapter    "ham-wemo"      : 1.0.0
Adapter    "harmony"       : 1.2.2    , installed 1.2.2
Adapter    "hass-mqtt"     : 0.0.5
Adapter    "heytech"       : 0.1.4
Adapter    "hid"           : 0.1.17
Adapter    "hilink"        : 0.2.7
Adapter    "history"       : 1.8.6    , installed 1.8.6
Adapter    "hm-rega"       : 2.3.3    , installed 2.3.3
Adapter    "hm-rpc"        : 1.9.12   , installed 1.9.12
Adapter    "hmip"          : 0.0.10
Adapter    "hombot"        : 0.1.3
Adapter    "homee"         : 0.3.1
Adapter    "homepilot"     : 1.0.3
Adapter    "hp-ilo"        : 1.0.1
Adapter    "hs100"         : 1.0.10   , installed 1.0.10
Adapter    "hue"           : 1.1.0    , installed 1.2.3
Adapter    "hyperion"      : 0.0.9
Adapter    "i2c"           : 0.0.6
Adapter    "ical"          : 1.7.0
Adapter    "icons-addictive-flavour-png": 0.1.0   , installed 0.1.0
Adapter    "icons-fatcow-hosting": 0.1.0   , installed 0.1.0
Adapter    "icons-icons8"  : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0   , installed 0.1.0
Adapter    "icons-material-svg": 0.1.0
Adapter    "icons-mfd-png" : 1.0.2    , installed 1.0.2
Adapter    "icons-mfd-svg" : 1.0.2
Adapter    "icons-open-icon-library-png": 0.1.3   , installed 0.1.3
Adapter    "icons-ultimate-png": 1.0.1   , installed 1.0.1
Adapter    "influxdb"      : 1.6.3
Adapter    "info"          : 1.3.7    , installed 1.3.7
Adapter    "innogy-smarthome": 0.3.2
Adapter    "intesishome"   : 0.1.2
Adapter    "iogo"          : 0.3.5    , installed 0.3.5
Adapter    "iot"           : 0.4.3    , installed 0.4.3
Adapter    "iqontrol"      : 0.0.28   , installed 0.0.28
Adapter    "javascript"    : 4.1.12   , installed 4.1.12
Adapter    "jeelink"       : 0.1.0
Controller "js-controller" : 1.5.11   , installed 1.5.11
Adapter    "js2fs"         : 0.1.5
Adapter    "kecontact"     : 0.1.0
Adapter    "klf200"        : 0.9.5
Adapter    "km200"         : 2.0.3
Adapter    "knmi-weather"  : 0.1.1
Adapter    "knx"           : 1.0.20
Adapter    "kodi"          : 1.0.0
Adapter    "kress"         : 2.5.5
Adapter    "landroid"      : 1.0.3
Adapter    "landroid-s"    : 2.5.5
Adapter    "lcn"           : 0.3.2
Adapter    "lgtv"          : 1.0.8
Adapter    "lgtv-rs"       : 0.0.4
Adapter    "lgtv11"        : 1.0.5
Adapter    "lifx"          : 0.1.0
Adapter    "lightify"      : 0.2.16
Adapter    "link"          : 0.4.2
Adapter    "linkeddevices" : 0.2.1
Adapter    "loxone"        : 1.0.0
Adapter    "luftdaten"     : 0.0.7
Adapter    "lupusec"       : 1.1.7
Adapter    "luxtronik1"    : 0.0.7
Adapter    "material"      : 0.10.6   , installed 0.10.6
Adapter    "maxcube"       : 0.1.2    , installed 0.1.2
Adapter    "maxcul"        : 1.0.0    , installed 1.0.0
Adapter    "mbus"          : 1.1.1
Adapter    "mclighting"    : 0.0.12
Adapter    "megad"         : 1.2.1
Adapter    "megadd"        : 0.2.0
Adapter    "megaesp"       : 0.1.0
Adapter    "mercedesme"    : 0.0.6
Adapter    "meross"        : 1.0.0
Adapter    "miele"         : 0.1.5
Adapter    "mihome"        : 1.2.6    , installed 1.2.6
Adapter    "mihome-airpurifier": 0.0.6
Adapter    "mihome-lamp"   : 1.1.0
Adapter    "mihome-plug"   : 0.2.0
Adapter    "mihome-vacuum" : 1.1.5    , installed 1.1.5
Adapter    "miio"          : 0.0.7
Adapter    "mikrotik"      : 1.0.4
Adapter    "milight"       : 0.3.6
Adapter    "milight-smart-light": 0.2.7
Adapter    "mobile"        : 0.5.0    , installed 0.5.0
Adapter    "modbus"        : 3.0.0
Adapter    "moma"          : 1.1.1    , installed 1.1.1
Adapter    "mpd"           : 1.0.2
Adapter    "mqtt"          : 2.1.0    , installed 2.1.0
Adapter    "mqtt-client"   : 1.1.1    , installed 1.1.1
Adapter    "musiccast"     : 0.1.0
Adapter    "mysensors"     : 2.0.0
Adapter    "nanoleaf-lightpanels": 0.8.1
Adapter    "nello"         : 2.0.5
Adapter    "netatmo"       : 1.3.1    , installed 1.3.1
Adapter    "nibeuplink"    : 0.2.2
Adapter    "node-red"      : 1.8.0    , installed 1.8.0
Adapter    "nuki"          : 1.0.4    , installed 1.0.4
Adapter    "nuki2"         : 0.9.12
Adapter    "nut"           : 1.1.3
Adapter    "oilfox"        : 0.0.5
Adapter    "onkyo"         : 2.0.2
Adapter    "onvif"         : 0.0.2
Adapter    "openhab"       : 1.1.0
Adapter    "opentherm"     : 0.1.9
Adapter    "openweathermap": 0.1.0    , installed 0.1.0
Adapter    "opi"           : 0.1.1
Adapter    "oppoplayer"    : 0.2.1
Adapter    "owfs"          : 0.5.0
Adapter    "owntracks"     : 0.6.2
Adapter    "panasonic-viera": 1.0.2
Adapter    "parser"        : 1.0.7
Adapter    "paw"           : 0.3.2
Adapter    "phantomjs"     : 1.0.1
Adapter    "piface"        : 1.0.0
Adapter    "pimatic"       : 0.1.5
Adapter    "ping"          : 1.3.2
Adapter    "places"        : 0.7.0
Adapter    "plex"          : 0.3.0
Adapter    "plexconnect"   : 0.0.7    , installed 0.0.7
Adapter    "pollenflug"    : 1.0.3
Adapter    "primelab"      : 1.0.2
Adapter    "proxmox"       : 0.3.2
Adapter    "proxy"         : 1.0.2
Adapter    "pushbullet"    : 0.0.11
Adapter    "pushover"      : 1.0.4    , installed 1.0.4
Adapter    "pushsafer"     : 0.1.8
Adapter    "radar2"        : 1.0.7    , installed 1.0.7
Adapter    "rflink"        : 2.0.0    , installed 2.0.0
Adapter    "rickshaw"      : 1.0.0    , installed 1.0.0
Adapter    "ring"          : 1.0.4
Adapter    "roadtraffic"   : 0.0.2
Adapter    "roomba"        : 1.0.1
Adapter    "rpi2"          : 1.0.0    , installed 1.0.0
Adapter    "s7"            : 1.1.4
Adapter    "samsung"       : 0.2.9
Adapter    "sayit"         : 1.7.0    , installed 1.7.0
Adapter    "sbfspot"       : 2.3.2
Adapter    "scenes"        : 1.1.0    , installed 1.1.0
Adapter    "shelly"        : 3.0.2
Adapter    "sia"           : 1.0.2
Adapter    "siegenia"      : 1.0.0
Adapter    "simple-api"    : 2.0.2    , installed 2.0.2
Adapter    "sma-em"        : 0.5.3
Adapter    "smappee"       : 0.2.2
Adapter    "smartmeter"    : 1.2.2
Adapter    "snips"         : 1.1.7
Adapter    "snmp"          : 0.5.0    , installed 0.5.0
Adapter    "socketio"      : 2.1.1    , installed 2.1.1
Adapter    "solarlog"      : 0.1.5
Adapter    "solarwetter"   : 1.0.0    , installed 1.0.0
Adapter    "sonnen"        : 1.3.0
Adapter    "sonoff"        : 2.2.2    , installed 2.2.2
Adapter    "sonos"         : 1.7.7    , installed 1.7.7
Adapter    "sonus"         : 0.1.1
Adapter    "sony-bravia"   : 1.0.1
Adapter    "sourceanalytix": 0.2.281  , installed 0.2.29 [Updateable]
Adapter    "spotify-premium": 1.0.0   , installed 1.0.0
Adapter    "sql"           : 1.9.5
Adapter    "squeezebox"    : 1.0.0
Adapter    "squeezeboxrpc" : 0.8.10
Adapter    "starline"      : 1.0.0
Adapter    "statistics"    : 0.2.0
Adapter    "stiebel-isg"   : 1.4.4
Adapter    "synology"      : 0.0.4
Adapter    "systeminfo"    : 0.2.2    , installed 0.2.2
Adapter    "tankerkoenig"  : 2.0.6
Adapter    "telegram"      : 1.4.3
Adapter    "terminal"      : 0.1.2
Adapter    "text2command"  : 1.2.5
Adapter    "tinker"        : 0.1.4
Adapter    "tr-064"        : 0.4.18   , installed 0.4.18
Adapter    "tradfri"       : 2.3.0
Adapter    "tunnelbroker-endpoint-updater": 0.0.1
Adapter    "tuya"          : 1.0.7
Adapter    "tvspielfilm"   : 1.0.4
Adapter    "unifi"         : 0.3.1
Adapter    "upnp"          : 1.0.11   , installed 1.0.11
Adapter    "valloxmv"      : 1.0.0
Adapter    "vcard"         : 0.0.9
Adapter    "viessmann"     : 0.9.5
Adapter    "viessmannapi"  : 1.3.2
Adapter    "virtualpowermeter": 1.0.0   , installed 1.0.0
Adapter    "vis"           : 1.2.0    , installed 1.2.0
Adapter    "vis-bars"      : 0.1.4
Adapter    "vis-canvas-gauges": 0.1.5
Adapter    "vis-colorpicker": 1.1.1
Adapter    "vis-fancyswitch": 1.1.0
Adapter    "vis-google-fonts": 0.1.0
Adapter    "vis-history"   : 0.2.7
Adapter    "vis-hqwidgets" : 1.1.2    , installed 1.1.2
Adapter    "vis-jqui-mfd"  : 1.0.12
Adapter    "vis-justgage"  : 1.0.0    , installed 1.0.0
Adapter    "vis-keyboard"  : 0.0.2
Adapter    "vis-lcars"     : 1.0.4
Adapter    "vis-map"       : 1.0.2
Adapter    "vis-material"  : 0.1.3    , installed 0.1.3
Adapter    "vis-metro"     : 1.1.2    , installed 1.1.2
Adapter    "vis-players"   : 0.1.5
Adapter    "vis-plumb"     : 1.0.2
Adapter    "vis-rgraph"    : 0.0.2
Adapter    "vis-timeandweather": 1.1.7   , installed 1.1.7
Adapter    "vis-weather"   : 2.3.0
Adapter    "vr200"         : 1.0.0
Adapter    "weatherunderground": 3.0.10  , installed 3.0.10
Adapter    "web"           : 2.4.1    , installed 2.4.1
Adapter    "wetty"         : 0.1.1    , installed 0.1.1
Adapter    "wiffi-wz"      : 2.0.1
Adapter    "wifilight"     : 0.2.0
Adapter    "wm-bus"        : 0.3.1
Adapter    "wolf"          : 0.9.2
Adapter    "xbox"          : 0.5.7
Adapter    "xs1"           : 1.0.2
Adapter    "yahka"         : 0.9.2    , installed 0.9.2
Adapter    "yamaha"        : 0.3.19
Adapter    "yeelight-2"    : 1.0.1
Adapter    "yr"            : 2.0.3    , installed 2.0.3
Adapter    "zigbee"        : 0.10.3
Adapter    "zont"          : 0.5.3
Adapter    "zwave"         : 1.4.1
erich@SmartHome:/opt/iobroker$

[Homoran]

@muckel

Mir gehen langsam die Optionen aus.

Bleibt die Frage wie und wann du damals ioBroker installiert hast.

Das gleiche gilt für den Fixer.

Systemctl müsste es eigentlich immer tun.

Welche Hardware, welches OS?

node -v
nodejs -v
npm -v

[muckel]

steht ganz oben.

10.16
10.16
6.4.1

installation ist schon ewig her. ubuntu schätze ich mit curl. ich weiß es nicht mehr

ubuntu 18.04
NUC

fullbackup restore von der console aus ohne backitup.
geht das?

[Homoran]

@muckel sagte in IOBroker startet nach update auf jscontroller *.*.11 nicht:

fullbackup restore

Was ist das?

@muckel sagte in IOBroker startet nach update auf jscontroller *.*.11 nicht:

geht das?

Evtl. Nicht

Welches node war vorher drauf

[muckel]

vom backitup adapter habe ich ein fullbackup vom 25.05.2019.
ist ein tar.gz file.
am anfang denke ich war es ein 6.x
habe die 8.x ausgelassen und habe direkt auf 10.x upgedatet. hat damals funktioniert.

wenn ich iobroker neu installiere auf das jetzige system ist dann alles jungfräulich?

curl -sL https://iobroker.net/install.sh | bash -

[Homoran]

@muckel
Ich habe noch nie ein full backup wiederhergestellt.
Daher kenne ich weder das richtige Vorgehen noch die Fallstricke.

Da müsste @simatec was zu sagen.

[muckel]

ich verstehe nicht warum da gar nichts geht. so etwas hatte ich noch nie.

das mit der neuinstallation könnte funktionieren?
ich meine über das alte system drüberbügeln.

[muckel]

@simatec

erich@SmartHome:/opt/iobroker$ sudo iobroker restore 0
/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupBackup.js:568
        if (parseInt(name.trim(), 10).toString() === name.trim().toString()) {
                          ^

TypeError: name.trim is not a function
    at BackupRestore.restoreBackup (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupBackup.js:568:27)
    at dbConnect (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:1474:28)
    at Object.connected (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:3087:29)
    at Immediate.<anonymous> (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInMemServer.js:184:26)
    at runCallback (timers.js:705:18)
    at tryOnImmediate (timers.js:676:5)
    at processImmediate (timers.js:658:5)
erich@SmartHome:/opt/iobroker$

das funktioniert auch nicht.

[muckel]

so, fullbackup in der cli eingespielt mit

sudo tar -xzvf total_2019_05_25-03_00_10_backupiobroker.tar.gz -C /opt/iobroker

1.) system funktioniert wieder.
2.) ABER: beim updaten der adapter kommen folgende warnings und errors. Der/die Adapter werden allerdings upgedatet! KENNT DAS WER?
3.) jscontroller ist natürlich wieder auf 1.5.7
4.) ein update auf 1.5.11 trau ich mich jetzt nicht mehr machen.
...

$ ./iobroker upgrade weatherunderground
Update weatherunderground from @3.0.9 to @3.0.10
NPM version: 6.4.1
npm install iobroker.weatherunderground@3.0.10 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call)
../src/contextify.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE ContextifyContext::New(Nan::NAN_METHOD_ARGS_TYPE)’:../src/contextify.cc:62:74: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
         ContextifyContext* ctx = new ContextifyContext(info[0]->ToObject());
                                                                          ^

In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~

../src/contextify.cc: In static member function ‘static v8::Local<v8::Context> ContextWrap::createV8Context(v8::Local<v8::Object>)’:../src/contextify.cc:131:68: error: no matching function for call to ‘v8::Function::NewInstance()’
         Local<Object> wrapper = Nan::New(constructor)->NewInstance();
                                                                    ^

In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:3993:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Function::NewInstance(v8::Local<v8::Context>, int, v8::Local<v8::Value>*) const
   V8_WARN_UNUSED_RESULT MaybeLocal<Object> NewInstance(
                                            ^~~~~~~~~~~
/home/erich/.node-gyp/10.16.0/include/node/v8.h:3993:44: note:   candidate expects 3 arguments, 0 provided
/home/erich/.node-gyp/10.16.0/include/node/v8.h:3996:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Function::NewInstance(v8::Local<v8::Context>) const
   V8_WARN_UNUSED_RESULT MaybeLocal<Object> NewInstance(
                                            ^~~~~~~~~~~
/home/erich/.node-gyp/10.16.0/include/node/v8.h:3996:44: note:   candidate expects 1 argument, 0 provided

../src/contextify.cc:150:16: error: ‘class v8::ObjectTemplate’ has no member named ‘SetAccessCheckCallbacks’; did you mean ‘SetAccessCheckCallback’?         otmpl->SetAccessCheckCallbacks(GlobalPropertyNamedAccessCheck,
                ^~~~~~~~~~~~~~~~~~~~~~~
                SetAccessCheckCallback

../src/contextify.cc: In static member function ‘static void ContextWrap::GlobalPropertyGetter(v8::Local<v8::String>, const Nan::PropertyCallbackInfo<v8::Value>&)’:../src/contextify.cc:176:52: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
         Local<Object> data = info.Data()->ToObject();
                                                    ^
In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,
                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~

../src/contextify.cc:182:80: error: no matching function for call to ‘v8::Object::GetRealNamedProperty(v8::Local<v8::String>&)’         Local<Value> rv = Nan::New(ctx->sandbox)->GetRealNamedProperty(property);
                                                                                ^
In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,
                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note: candidate: v8::MaybeLocal<v8::Value> v8::Object::GetRealNamedProperty(v8::Local<v8::Context>, v8::Local<v8::Name>)
   V8_WARN_UNUSED_RESULT MaybeLocal<Value> GetRealNamedProperty(
                                           ^~~~~~~~~~~~~~~~~~~~
/home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note:   candidate expects 2 arguments, 1 provided
../src/contextify.cc: In static member function ‘static void ContextWrap::GlobalPropertySetter(v8::Local<v8::String>, v8::Local<v8::Value>, const Nan::PropertyCallbackInfo<v8::Value>&)’:
../src/contextify.cc:192:52: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
         Local<Object> data = info.Data()->ToObject();
                                                    ^

In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~
../src/contextify.cc: In static member function ‘static void ContextWrap::GlobalPropertyQuery(v8::Local<v8::String>, const Nan::PropertyCallbackInfo<v8::Integer>&)’:
../src/contextify.cc:203:52: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
         Local<Object> data = info.Data()->ToObject();
                                                    ^
In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,
                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~

../src/contextify.cc:209:67: error: no matching function for call to ‘v8::Object::GetRealNamedProperty(v8::Local<v8::String>&)’         if (!Nan::New(ctx->sandbox)->GetRealNamedProperty(property).IsEmpty() ||
                                                                   ^
In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,
                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note: candidate: v8::MaybeLocal<v8::Value> v8::Object::GetRealNamedProperty(v8::Local<v8::Context>, v8::Local<v8::Name>)
   V8_WARN_UNUSED_RESULT MaybeLocal<Value> GetRealNamedProperty(
                                           ^~~~~~~~~~~~~~~~~~~~
/home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note:   candidate expects 2 arguments, 1 provided
../src/contextify.cc:210:71: error: no matching function for call to ‘v8::Object::GetRealNamedProperty(v8::Local<v8::String>&)’
             !Nan::New(ctx->proxyGlobal)->GetRealNamedProperty(property).IsEmpty()) {
                                                                       ^
In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,
                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note: candidate: v8::MaybeLocal<v8::Value> v8::Object::GetRealNamedProperty(v8::Local<v8::Context>, v8::Local<v8::Name>)
   V8_WARN_UNUSED_RESULT MaybeLocal<Value> GetRealNamedProperty(
                                           ^~~~~~~~~~~~~~~~~~~~
/home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note:   candidate expects 2 arguments, 1 provided

../src/contextify.cc: In static member function ‘static void ContextWrap::GlobalPropertyDeleter(v8::Local<v8::String>, const Nan::PropertyCallbackInfo<v8::Boolean>&)’:../src/contextify.cc:218:52: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
         Local<Object> data = info.Data()->ToObject();
                                                    ^
In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,
                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~

../src/contextify.cc: In static member function ‘static void ContextWrap::GlobalPropertyEnumerator(const Nan::PropertyCallbackInfo<v8::Array>&)’:../src/contextify.cc:229:52: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
         Local<Object> data = info.Data()->ToObject();
                                                    ^
In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,
                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~

../src/contextify.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE ContextifyScript::RunInContext(Nan::NAN_METHOD_ARGS_TYPE)’:../src/contextify.cc:319:62: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
         if (!ContextifyContext::InstanceOf(info[0]->ToObject()))
                                                              ^

In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~
../src/contextify.cc:322:95: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
         ContextifyContext* ctx = Nan::ObjectWrap::Unwrap<ContextifyContext>(info[0]->ToObject());
                                                                                               ^
In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0,
                 from ../src/contextify.cc:1:
/home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~

make: *** [Release/obj.target/contextify/src/contextify.o] Error 1gyp 
ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.15.0-50-generic
gyp ERR! command "/usr/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/contextify
gyp ERR! node -v v10.16.0
gyp 
ERR! node-gyp -v v3.8.0gyp ERR! not ok 

npm
 WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/engine.io-parser/node_modules/arraybuffer.slic/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/engine.io-parser/node_modules/base64-arraybuff/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/node-schedule/node_modules/cron-parser/node_modules/is-nan/node_modules/define-properties/node_modules/obj/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/yargs/node_modules/cliui/node_modules/wrap-ansi/node_modules/string-width/node_modules/is-fullwidth-code-p/package.json'

npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/prompt/node_modules/utile/node_modules/rimraf/node_modules/glob/node_modules/minimatch/node_modules/brace-/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/yargs/node_modules/os-locale/node_modules/execa/node_modules/cross-spawn/node_modules/which/node_modules/i/package.json'
npm WARN winston-daily-rotate-file@1.7.2 requires a peer of winston@2.x but none is installed. You must install peer dependencies yourself.

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"})

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: xpc-connection@0.1.4 (node_modules/xpc-connection):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for xpc-connection@0.1.4: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"})
npm
 WARN optional SKIPPING OPTIONAL DEPENDENCY: contextify@0.1.15 (node_modules/contextify):npm WARN optional SKIPPING OPTIONAL DEPENDENCY: contextify@0.1.15 install: `node-gyp rebuild`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1


npm install --production (System call) in "/opt/iobroker/node_modules/iobroker.weatherunderground"
npm WARN deprecated gulp-util@3.0.8: gulp-util is deprecated - replace it, following the guidelines at https://medium.com/gulpjs/gulp-util-ca3b1f9f9ac5
npm 
WARN deprecated graceful-fs@3.0.11: please upgrade to graceful-fs 4 for compatibility with current and future versions of Node.js
npm
 WARN deprecated minimatch@2.0.10: Please update to minimatch 3.0.2 or higher to avoid a RegExp DoS issue
npm 
WARN deprecated natives@1.1.6: This module relies on Node.js's internals and will break at some point. Do not use it, and update to graceful-fs@4.x.
npm
 WARN deprecated minimatch@0.2.14: Please update to minimatch 3.0.2 or higher to avoid a RegExp DoS issue
npm
 WARN deprecated graceful-fs@1.2.3: please upgrade to graceful-fs 4 for compatibility with current and future versions of Node.js
npm
 notice created a lockfile as package-lock.json. You should commit this file.
got /opt/iobroker/node_modules/iobroker.weatherunderground/admin
Update "system.adapter.weatherunderground.0"
upload [3] weatherunderground.admin /opt/iobroker/node_modules/iobroker.weatherunderground/admin/wu.png wu.png image/png
upload [2] weatherunderground.admin /opt/iobroker/node_modules/iobroker.weatherunderground/admin/words.js words.js application/javascript
upload [1] weatherunderground.admin /opt/iobroker/node_modules/iobroker.weatherunderground/admin/index_m.html index_m.html text/html
upload [0] weatherunderground.admin /opt/iobroker/node_modules/iobroker.weatherunderground/admin/DOCS.md DOCS.md text/markdown
Adapter "weatherunderground" updated
process exited with code 0

[muckel]

Ich muss jetzt mal weg!
Falls wer das Problem analysieren will bin ich gerne bereit am abend alles nochmals durchzuspielen.
es war definitiv jscontroller 1.5.7 > 1.5.11

danke für die unterstützung!

liebe grüße erich