Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[BoehserWolf]

@thomas-braun
Update läuft bei mir immer per Admin-Instanz.

Ich meine mich zu erinnern, dass das Thema nach dem letzten nodejs Update auf v16.x zuerst aufgetreten ist.

Möglicherweise ist der Link von dir aber der Wink in die richtige Richtung. Mein User iobroker hat als shell nologin konfiguriert:

iobroker:x:1001:1001::/home/iobroker:/usr/sbin/nologin

Das heißt also, der User darf sich nicht direkt einloggen:

root@iobroker:~:$ su - iobroker
This account is currently not available.
root@iobroker:~:$ su - iobroker -s /bin/bash
bash: /home/iobroker/.iobroker/iobroker_completions: No such file or directory
iobroker@iobroker:/opt/iobroker$

Könnte mir vorstellen, dass das mittlerweile ein Problem ist. Denn nun sehe ich gerade, dass iobroker die Datei iobroker_completions benötigt.

Vermutlich ist die fehlende Datei die eigentliche Ursache. Was sollte in dieser Datei stehen?

[Thomas Braun]

@boehserwolf
Und ich könnte mir vorstellen, dass du mit den falschen usern unterwegs bist.
Nie als root und als iobroker loggt man sich auch nicht ein, weil der als Systemuser angelegt ist. Als solcher ist /usr/sbin/nologin auch vollkommen korrekt.

Leg dir also einen Standarduser an, hau den in die Gruppe iobroker und dann agierst du mit dem.

[BoehserWolf]

@thomas-braun
Soweit so klar - den Standard-User habe ich wohl, da ich diese Diskussion vermeiden möchte ;) Nunja zu spät...

Hier ging es nur um das Prinzip und Ursachenforschung sowie Darstellung einer möglichen Problematik.

Interpretiere ich dich nun richtig, dass du die Ursache eher weder am nologin noch an der fehlenden Datei iobroker_completions vermutest?

Weil dann fällt mir derzeit keine Ursache für meine ursprüngliche Problematik ein.

[Thomas Braun]

@boehserwolf sagte in journalctl getcwd() failed: No such file or directory:

iobroker_completions

Die iobroker_completions liegt in ~/.iobroker des Standardusers (bei dir wohl mit der UID=1000).

Bekommst du die Meldungen auch wenn mit dem Standarduser im Terminal aktualisiert wird?

iob update 
iob upgrade

[BoehserWolf]

@thomas-braun
Derzeit bin ich "leider" aktuell, so dass ich es nicht sagen kann:

boehserwolf@iobroker:~:$ iob update
Used repository: Stable (default)
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alarm"        : 3.3.11   , installed 3.3.11
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "daswetter"    : 3.1.8    , installed 3.1.8
Adapter    "device-watcher": 2.9.1   , installed 2.9.1
Adapter    "devices"      : 1.1.2    , installed 1.1.2
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "dwd"          : 2.8.3    , installed 2.8.3
Adapter    "flot"         : 1.11.0   , installed 1.11.0
Adapter    "followthesun" : 0.4.1    , installed 0.4.1
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.16  , installed 1.15.16
Adapter    "hue"          : 3.7.1    , installed 3.7.1
Adapter    "ical"         : 1.13.2   , installed 1.13.2
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "nut"          : 1.6.0    , installed 1.6.0
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shelly"       : 6.3.1    , installed 6.3.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "squeezeboxrpc": 1.3.9    , installed 1.3.10
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "telegram"     : 1.15.2   , installed 1.15.2
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-colorpicker": 1.2.0  , installed 1.2.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.3.0    , installed 1.3.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
boehserwolf@iobroker:~:$ iob upgrade
All adapters are up to date

Danach tritt im journalctl keine Fehlermeldung auf.
Normalerweise tritt der Fehler nur nach einem Update eines Adapters auf.

Nebeninfo: Mein User "boehserwolf" hat die Datei iobroker_completions im home directory:

boehserwolf@iobroker:~:$ cat ~/.iobroker/iobroker_completions
iobroker_yargs_completions()
{
local cur_word args type_list

cur_word="${COMP_WORDS[COMP_CWORD]}"
args=("${COMP_WORDS[@]}")

# ask yargs to generate completions.
type_list=$(iobroker --get-yargs-completions "${args[@]}")

COMPREPLY=( $(compgen -W "${type_list}" -- ${cur_word}) )

# if no match was found, fall back to filename completion
if [ ${#COMPREPLY[@]} -eq 0 ]; then
COMPREPLY=()
fi

return 0
}
complete -o default -F iobroker_yargs_completions iobroker
complete -o default -F iobroker_yargs_completions iob

[Thomas Braun]

@boehserwolf sagte in journalctl getcwd() failed: No such file or directory:

Nebeninfo: Mein User "boehserwolf" hat die Datei iobroker_completions im home directory

So soll es sein.

[Thomas Braun]

@boehserwolf

Die Summary ist soweit i. O.
Steht in der Langfassung vielleicht noch was drin?

[BoehserWolf]

@thomas-braun
Beim Überfliegen würde ich gefühlt nein sagen - aber sieh selbst:

Skript v.2023-04-16

*** BASE SYSTEM ***
Architecture    : x86_64
Docker          : false
Virtualization  : lxc
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 12:10:29 up 17 days, 22:50,  0 users,  load average: 0.18, 0.24, 0.26
CPU threads: 2


*** Time and Time Zones ***
               Local time: Thu 2023-06-01 12:10:29 CEST
           Universal time: Thu 2023-06-01 10:10:29 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: no
              NTP service: inactive
          RTC in local TZ: no

*** User and Groups ***
boehserwolf
/home/boehserwolf
boehserwolf sudo iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.1G        1.7G        1.0G        0.0K        1.4G        2.4G
Swap:           1.5G        0.0K        1.5G
Total:          5.6G        1.7G        2.6G

         4096 M total memory
         1672 M used memory
          634 M active memory
         2174 M inactive memory
         1019 M free memory
            0 M buffer memory
         1403 M swap cache
         1536 M total swap
            0 M used swap
         1535 M free swap

*** FILESYSTEM ***
Filesystem     Type   Size  Used Avail Use% Mounted on
/dev/loop8     ext4   8.8G  6.3G  2.2G  75% /
/dev/md0       ext4   7.3T  4.8T  2.4T  67% /mnt/backup_iobroker
none           tmpfs  492K  4.0K  488K   1% /dev
tmpfs          tmpfs   12G     0   12G   0% /dev/shm
tmpfs          tmpfs  4.7G  120K  4.7G   1% /run
tmpfs          tmpfs  5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs  2.4G     0  2.4G   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun May 14 13:18:32 2023] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sun May 14 13:18:32 2023] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[Sun May 14 13:18:34 2023] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none.
[Sun May 14 13:18:34 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: errors=remount-ro,commit=120. Quota mode: none.
[Sun May 14 13:18:58 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sun May 14 13:19:03 2023] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sun May 14 13:19:09 2023] EXT4-fs (loop2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sun May 14 13:19:15 2023] EXT4-fs (loop3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sun May 14 13:19:20 2023] EXT4-fs (loop4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sun May 14 13:19:32 2023] EXT4-fs (loop5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sun May 14 13:19:37 2023] EXT4-fs (loop6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sun May 14 13:19:42 2023] EXT4-fs (loop7): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sun May 14 13:19:56 2023] EXT4-fs (loop8): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Mon May 15 17:53:02 2023] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET                 SOURCE                                               FSTYPE OPTIONS
/                      /dev/loop8                                           ext4   rw,relatime
`-/mnt/backup_iobroker /dev/md0[/backup/servers/241_iobroker.wald/iobroker] ext4   rw,relatime,errors=remount-ro,commit=120

Files in neuralgic directories:
/var:
718M    /var/
405M    /var/log
404M    /var/log/journal/10211f417bb24cb79e93cf70efeb0f05
404M    /var/log/journal
214M    /var/lib

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 32.0M in the file system.

/opt/iobroker/backups:
188M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
541M    /opt/iobroker/iobroker-data/
299M    /opt/iobroker/iobroker-data/files
175M    /opt/iobroker/iobroker-data/backup-objects
72M     /opt/iobroker/iobroker-data/files/telegram.admin
51M     /opt/iobroker/iobroker-data/files/javascript.admin
sort: write failed: 'standard output': Broken pipe
sort: write error

The five largest files in iobroker-data are:
sort: write failed: 'standard output': Broken pipe
sort: write error
33M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map
22M     /opt/iobroker/iobroker-data/states.jsonl
17M     /opt/iobroker/iobroker-data/objects.jsonl
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map
13M     /opt/iobroker/iobroker-data/objects.json.migrated

*** NodeJS-Installation ***

/usr/bin/nodejs         v16.20.0
/usr/bin/node           v16.20.0
/usr/bin/npm            8.19.4
/usr/bin/npx            8.19.4


nodejs:
  Installed: 16.20.0-deb-1nodesource1
  Candidate: 16.20.0-deb-1nodesource1
  Version table:
 *** 16.20.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main amd64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org bullseye-security/updates/main amd64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://ftp.de.debian.org/debian bullseye/main amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.admin.1                  : admin                 : iobroker                                 - disabled, port: 8089, bind: 0.0.0.0, run as: admin
  system.adapter.alarm.0                  : alarm                 : iobroker                                 - disabled
  system.adapter.alarm.1                  : alarm                 : iobroker                                 - disabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
  system.adapter.daswetter.0              : daswetter             : iobroker                                 -  enabled
+ system.adapter.device-watcher.0         : device-watcher        : iobroker                                 -  enabled
  system.adapter.devices.0                : devices               : iobroker                                 -  enabled
  system.adapter.discovery.0              : discovery             : iobroker                                 - disabled
  system.adapter.dwd.0                    : dwd                   : iobroker                                 -  enabled
  system.adapter.flot.0                   : flot                  : iobroker                                 -  enabled
+ system.adapter.followthesun.0           : followthesun          : iobroker                                 -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : iobroker                                 -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker                                 -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker                                 -  enabled, port: 0
+ system.adapter.hue.0                    : hue                   : iobroker                                 -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : iobroker                                 -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : iobroker                                 -  enabled
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.nut.0                    : nut                   : iobroker                                 -  enabled
+ system.adapter.scenes.0                 : scenes                : iobroker                                 -  enabled
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.socketio.0               : socketio              : iobroker                                 -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.squeezeboxrpc.0          : squeezeboxrpc         : iobroker                                 -  enabled, port: 9000
+ system.adapter.statistics.0             : statistics            : iobroker                                 -  enabled
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.trashschedule.0          : trashschedule         : iobroker                                 -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : iobroker                                 -  enabled
  system.adapter.vis-history.0            : vis-history           : iobroker                                 -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker                                 -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : iobroker                                 -  enabled
  system.adapter.vis-justgage.0           : vis-justgage          : iobroker                                 -  enabled
  system.adapter.vis-metro.0              : vis-metro             : iobroker                                 -  enabled
  system.adapter.vis-plumb.0              : vis-plumb             : iobroker                                 -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker                                 -  enabled
  system.adapter.vis-weather.0            : vis-weather           : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker                                 -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker                                 -  enabled, port: 0
+ system.adapter.hue.0                    : hue                   : iobroker                                 -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.socketio.0               : socketio              : iobroker                                 -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.squeezeboxrpc.0          : squeezeboxrpc         : iobroker                                 -  enabled, port: 9000
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest) : http://download.iobroker.net/sources-dist-latest.json
backup        : http://download.iobroker.net/sources-dist.json

Active repo(s): Stable (default)

Installed ioBroker-Instances
Used repository: Stable (default)
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alarm"        : 3.3.11   , installed 3.3.11
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "daswetter"    : 3.1.8    , installed 3.1.8
Adapter    "device-watcher": 2.9.1   , installed 2.9.1
Adapter    "devices"      : 1.1.2    , installed 1.1.2
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "dwd"          : 2.8.3    , installed 2.8.3
Adapter    "flot"         : 1.11.0   , installed 1.11.0
Adapter    "followthesun" : 0.4.1    , installed 0.4.1
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.16  , installed 1.15.16
Adapter    "hue"          : 3.7.1    , installed 3.7.1
Adapter    "ical"         : 1.13.2   , installed 1.13.2
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "nut"          : 1.6.0    , installed 1.6.0
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shelly"       : 6.3.1    , installed 6.3.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "squeezeboxrpc": 1.3.9    , installed 1.3.10
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "telegram"     : 1.15.2   , installed 1.15.2
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-colorpicker": 1.2.0  , installed 1.2.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.3.0    , installed 1.3.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        10104
States:         8915

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org bullseye-security/updates InRelease
Hit:2 http://ftp.de.debian.org/debian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_16.x bullseye InRelease
Hit:4 http://ftp.de.debian.org/debian bullseye-updates InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          53405      369/master
tcp        0      0 192.168.111.241:42010   0.0.0.0:*               LISTEN      1001       128996644  3061972/io.hm-rpc.0
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       128997699  3062077/io.shelly.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       128992120  3061826/iobroker.js
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       128993221  3061826/iobroker.js
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          44004      175/portmap
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          53271      194/sshd: /usr/sbin
tcp        0      0 0.0.0.0:8081            0.0.0.0:*               LISTEN      1001       128992177  3061844/io.admin.0
tcp        0      0 0.0.0.0:8082            0.0.0.0:*               LISTEN      1001       128996947  3062092/io.web.0
tcp        0      0 0.0.0.0:8084            0.0.0.0:*               LISTEN      1001       128997078  3062122/io.socketio
tcp        0      0 0.0.0.0:8087            0.0.0.0:*               LISTEN      1001       129004784  3062730/io.simple-a
tcp        0      0 192.168.111.241:49292   0.0.0.0:*               LISTEN      1001       128997483  3061987/io.hm-rpc.1
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          44003      175/portmap
udp        0      0 0.0.0.0:33794           0.0.0.0:*                           110        49618      84/avahi-daemon: ru
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           110        49616      84/avahi-daemon: ru

*** Log File - Last 25 Lines ***

2023-06-01 12:07:15.734  - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('OUTDOOR_TEMP_HUM_INFO', '🌡️N/O: 12,4 / 14,0°C | 💦73,0%', 0)
2023-06-01 12:07:16.724  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:07:31.680  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:07:50.142  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:08:11.179  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:08:27.723  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:08:31.111  - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('OUTDOOR_TEMP_HUM_INFO', '🌡️N/O: 12,4 / 14,0°C | 💦73,0%', 0)
2023-06-01 12:08:52.439  - info: javascript.0 (3061884) script.js.common.system.checkHomematicServicemeldungen: Neue Servicemeldung: OG Mia Fenster (0007D8A9A5A8ED) --- HmIP-SRH--- Typ: LOW_BAT_ALARM --- Status: 1 Batterie niedrig
2023-06-01 12:08:52.495  - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('BATTERIE_HMIP_WARN', 'HmIP Geräte mit (fast) leeren Batterien. Bitte kontrollieren und austauschen.', 0)
2023-06-01 12:08:52.502  - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('CCU_HM_ERROR', 'Hm Geräte mit Fehlern. Aktuelle Meldung(en): OG.Mia.Fenster (0007D8A9A5A8ED) - Spannung Batterien/Akkus gering. 1x LR3/AAA --- seit: 01.06.23 12:08:49 Uhr', 0)
2023-06-01 12:08:53.940  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:09:04.731  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:09:16.677  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:09:41.345  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:09:43.485  - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('OUTDOOR_TEMP_HUM_INFO', '🌡️N/O: 12,4 / 14,2°C | 💦73,0%', 0)
2023-06-01 12:09:50.933  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:10:00.031  - info: host.iobroker instance system.adapter.dwd.0 started with pid 3112729
2023-06-01 12:10:00.656  - info: dwd.0 (3112729) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2023-06-01 12:10:00.811  - info: dwd.0 (3112729) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v16.20.0, js-controller: 4.0.24
2023-06-01 12:10:01.196  - info: dwd.0 (3112729) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-06-01 12:10:01.723  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-06-01 12:10:20.061  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:10:31.586  - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('OUTDOOR_TEMP_HUM_INFO', '🌡️N/O: 12,4 / 14,2°C | 💦73,0%', 0)
2023-06-01 12:10:35.458  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points
2023-06-01 12:10:54.237  - info: influxdb.0 (3061911) Store 11 buffered influxDB history points

[Thomas Braun]

@boehserwolf sagte in journalctl getcwd() failed: No such file or directory:

sort: write failed: 'standard output': Broken pipe
sort: write error

The five largest files in iobroker-data are:
sort: write failed: 'standard output': Broken pipe
sort: write error

Das ist jedenfalls nicht normal.

[BoehserWolf]

@thomas-braun
Eher nicht. Ist mir zwar auch aufgefallen, habe mir das diag Script allerdings nicht näher angesehen. Werde mal das Netz durchwühlen.

[BoehserWolf]

@thomas-braun
Hm bissl rumgewühlt.

Im Script /home/iobroker/.diag.sh wird bspw. in Zeile 146 Folgendes aufgerufen:

sudo du -h /var/ | sort -rh | head -5;

Rufe ich den Befehl nun per shell auf, erhalte ich:

boehserwolf@iobroker:~:$ sudo du -h /var/ | sort -rh | head -5;
718M    /var/
405M    /var/log
404M    /var/log/journal/10211f417bb24cb79e93cf70efeb0f05
404M    /var/log/journal
214M    /var/lib
sort: fflush failed: 'standard output': Broken pipe
sort: write error

Ohne das "head -5" gibt es kein Problem.

Bissl googeln: https://unix.stackexchange.com/a/355164
Scheint bekanntes Verhalten zu sein, da sort noch zu viele Daten nachliefert.

Das mag zwar ein Problem sein, aber vermutlich eher nicht meins.