NEWS
Täglicher Absturz ioBroker + Zugriff auf Raspi [gelöst]
ioBroker Allgemein
340
Beiträge
5
Kommentatoren
66.1k
Aufrufe
4
Watching
-
@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@Glasfaser
Heisst also eine 64GB SD Karte und den ganzen Spass von vorne, oder...??Nein ...
Dein Arbeitsspeicher mit 1,8G geht dir aus ..Den Fehler dazu müssen wir erst einkreisen .
Deshalb :
@glasfaser sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Ich "vermute" ein javascript Programm läuft bei dir Amok ,sehe wir später mal nach .
-
@glasfaser
Also Reset??@searcher57 Augen zu und durch!
-
@searcher57 Augen zu und durch!
@homoran
Also die LED's leben wieder! Über Putty komme ich auch auf den Raspi. Aber nicht auf ioBroker! -
@searcher57
iob statusund dann die Aufträge von @Glasfaser
-
Er lüppt sowiso nichts mehr ...
ziehe den SteckerEDIT :
wenn er wieder da ist ,
dann einmal
topzeigen
und
iob diag@glasfaser sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Er lüppt sowiso nichts mehr ...
ziehe den SteckerEDIT :
wenn er wieder da ist ,
dann einmal
topzeigen
und
iob diag -
@searcher57
iob statusund dann die Aufträge von @Glasfaser
-
pi@raspberrypi:~ $ iob status iobroker is running on this host. Objects type: jsonl States type: jsonl pi@raspberrypi:~ $Kommt da noch was ... siehe oben die Anfrage !
-
@glasfaser sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Er lüppt sowiso nichts mehr ...
ziehe den SteckerEDIT :
wenn er wieder da ist ,
dann einmal
topzeigen
und
iob diag@homoran said in Täglicher Absturz ioBroker + Zugriff auf Raspi:
top
pi@raspberrypi:~ $ top top - 21:44:36 up 10 min, 1 user, load average: 0,12, 0,32, 0,28 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie %CPU(s): 1,6 us, 0,5 sy, 0,0 ni, 97,8 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Spch: 1849,2 total, 531,1 free, 1059,5 used, 258,6 buff/cache MiB Swap: 100,0 total, 100,0 free, 0,0 used. 722,8 avail Spch PID USER PR NI VIRT RES SHR S %CPU %MEM ZEIT+ BEFEHL 467 iobroker 20 0 1053068 225968 40892 S 4,3 11,9 1:45.01 iobroker.js-con 963 iobroker 20 0 886304 166152 41228 S 1,3 8,8 0:41.46 io.javascript.0 1351 pi 20 0 10488 3604 2856 R 1,0 0,2 0:01.13 top 816 iobroker 20 0 870856 91312 41856 S 0,7 4,8 0:09.61 io.telegram.0 1108 iobroker 20 0 687144 105672 36216 S 0,7 5,6 0:49.93 io.shelly.0 1205 iobroker 20 0 658816 69696 36048 S 0,7 3,7 0:05.63 io.simple-api.0 1082 iobroker 20 0 659540 70520 36480 S 0,3 3,7 0:04.71 io.hm-rpc.1 1149 iobroker 20 0 658616 71712 35984 S 0,3 3,8 0:04.29 io.discovery.0 1280 iobroker 20 0 662272 74028 36052 S 0,3 3,9 0:04.34 io.web.0 1317 pi 20 0 16072 4700 3456 S 0,3 0,2 0:00.13 sshd 1 root 20 0 165216 10064 7340 S 0,0 0,5 0:02.16 systemd 2 root 20 0 0 0 0 S 0,0 0,0 0:00.02 kthreadd 3 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_par_gp 5 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 slub_flushwq 6 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 netns 8 root 0 -20 0 0 0 I 0,0 0,0 0:00.52 kworker/0:0H-mmc_complete 9 root 20 0 0 0 0 I 0,0 0,0 0:01.25 kworker/u8:0-events_unbound 10 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 mm_percpu_wq 11 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_kthread 12 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_rude_kthread 13 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_trace_kthread 14 root 20 0 0 0 0 S 0,0 0,0 0:00.07 ksoftirqd/0 15 root 20 0 0 0 0 I 0,0 0,0 0:00.75 rcu_preempt 16 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/0 17 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/0 18 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/1 19 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/1 20 root 20 0 0 0 0 S 0,0 0,0 0:00.03 ksoftirqd/1 23 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/2 24 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/2 25 root 20 0 0 0 0 S 0,0 0,0 0:00.03 ksoftirqd/2 28 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/3 29 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/3 30 root 20 0 0 0 0 S 0,0 0,0 0:00.04 ksoftirqd/3 33 root 20 0 0 0 0 S 0,0 0,0 0:00.01 kdevtmpfs 34 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 inet_frag_wq 36 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kauditd 37 root 20 0 0 0 0 I 0,0 0,0 0:00.02 kworker/0:2-mm_percpu_wq 38 root 20 0 0 0 0 S 0,0 0,0 0:00.00 khungtaskd 39 root 20 0 0 0 0 I 0,0 0,0 0:00.11 kworker/u8:1-events_unbound 40 root 20 0 0 0 0 S 0,0 0,0 0:00.00 oom_reaper 41 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 writeback 42 root 20 0 0 0 0 S 0,0 0,0 0:00.05 kcompactd0 43 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kintegrityd 44 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kblockd 45 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 blkcg_punt_bio 46 root -51 0 0 0 0 S 0,0 0,0 0:00.00 watchdogd 49 root 0 -20 0 0 0 I 0,0 0,0 0:00.05 kworker/3:1H-kblockd 50 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rpciod 51 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 xprtiod 53 root 20 0 0 0 0 I 0,0 0,0 0:00.10 kworker/2:1-events_power_efficient 54 root 20 0 0 0 0 I 0,0 0,0 0:00.05 kworker/1:1-mm_percpu_wq 55 root 20 0 0 0 0 S 0,0 0,0 0:00.02 kswapd0 56 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 nfsiod 57 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kthrotldSkript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 21:45:58 up 11 min, 1 user, load average: 0.03, 0.24, 0.25 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=48.2'C volt=0.9360V *** Time and Time Zones *** Local time: Mon 2023-05-15 21:45:58 CEST Universal time: Mon 2023-05-15 19:45:58 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.8G 1.1G 521M 1.0M 267M 721M Swap: 99M 0B 99M Total: 1.9G 1.1G 621M 1849 M total memory 1060 M used memory 1108 M active memory 116 M inactive memory 521 M free memory 23 M buffer memory 243 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 3.7G 25G 14% / devtmpfs devtmpfs 667M 0 667M 0% /dev tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 370M 1.1M 369M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot /dev/sda1 exfat 29G 2.1G 27G 7% /mnt/usb0 tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon May 15 21:34:04 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:15:C8:D1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ae9ac4e2-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon May 15 21:34:05 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Mon May 15 21:34:05 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Mon May 15 21:34:06 2023] EXT4-fs (mmcblk0p2): recovery complete [Mon May 15 21:34:06 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon May 15 21:34:06 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon May 15 21:34:07 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/mnt/usb0 /dev/sda1 exfat rw,nosuid,nodev,noexec,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro Files in neuralgic directories: /var: 557M /var/ 180M /var/cache 175M /var/cache/apt 155M /var/lib 130M /var/lib/apt/lists Archived and active journals take up 120.0M in the file system. /opt/iobroker/backups: 11M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 319M /opt/iobroker/iobroker-data/ 277M /opt/iobroker/iobroker-data/files 61M /opt/iobroker/iobroker-data/files/vis-2-beta 51M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/telegram.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/objects.jsonl 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.904d455f.js.map 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 9.7M /opt/iobroker/iobroker-data/files/vis-2-beta/material-icons/knx-uf.json 9.7M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "backitup" : 2.6.19 , installed 2.6.19 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.0.12 , installed 1.0.12 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.16 , installed 1.15.16 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "iot" : 1.14.2 , installed 1.14.2 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "shelly" : 6.3.1 , installed 6.3.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 6.3.1 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "text2command" : 2.3.0 , installed 2.3.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "web" : 4.3.0 , installed 5.3.1 Adapter "ws" : 1.3.0 , installed 2.3.1 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 8635 States: 7356 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11098 505/sshd: /usr/sbin tcp 0 0 192.168.178.38:2001 0.0.0.0:* LISTEN 1001 15287 1082/io.hm-rpc.1 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12639 467/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 11111 467/iobroker.js-con tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1001 15241 1056/io.hm-rpc.0 tcp6 0 0 :::22 :::* LISTEN 0 11100 505/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 15762 1205/io.simple-api. tcp6 0 0 :::8082 :::* LISTEN 1001 17506 1280/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 12109 925/io.admin.0 udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 12281 1179/io.broadlink2. udp 0 0 0.0.0.0:60346 0.0.0.0:* 1001 17419 1179/io.broadlink2. udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14850 721/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 10997 340/avahi-daemon: r udp 0 0 0.0.0.0:33312 0.0.0.0:* 108 10999 340/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 15320 1108/io.shelly.0 udp6 0 0 :::5353 :::* 108 10998 340/avahi-daemon: r udp6 0 0 :::41421 :::* 108 11000 340/avahi-daemon: r udp6 0 0 :::546 :::* 0 14861 721/dhcpcd *** Log File - Last 25 Lines *** 2023-05-15 21:35:48.759 - info: alexa2.0 (1004) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-05-15 21:35:49.649 - info: host.raspberrypi instance system.adapter.tankerkoenig.0 started with pid 1224 2023-05-15 21:35:49.753 - info: alexa2.0 (1004) Initialization Done ... 2023-05-15 21:35:49.939 - info: iot.0 (1194) Connection changed: connect 2023-05-15 21:35:50.158 - info: simple-api.0 (1205) starting. Version 2.7.2 in /opt/iobroker/node_modules/iobroker.simple-api, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:35:50.211 - info: simple-api.0 (1205) simpleAPI server listening on port 8087 2023-05-15 21:35:50.215 - info: simple-api.0 (1205) Allow states only when user is owner: false 2023-05-15 21:35:50.245 - info: simple-api.0 (1205) http server listening on port 8087 2023-05-15 21:35:51.653 - info: broadlink2.0 (1179) Poll every 30 secods. 2023-05-15 21:35:51.654 - info: broadlink2.0 (1179) broadlink2.0 started and found 0 devices named 2023-05-15 21:35:51.655 - info: broadlink2.0 (1179) found macs: 2023-05-15 21:35:52.582 - info: tankerkoenig.0 (1224) starting. Version 3.3.7 in /opt/iobroker/node_modules/iobroker.tankerkoenig, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:35:52.636 - info: tankerkoenig.0 (1224) Adapter is already in daemon mode 2023-05-15 21:35:52.637 - info: tankerkoenig.0 (1224) Sync time set to 10 minutes or 600000 ms 2023-05-15 21:35:52.972 - info: host.raspberrypi instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-05-15 21:35:53.173 - info: host.raspberrypi instance system.adapter.text2command.0 started with pid 1254 2023-05-15 21:35:56.457 - info: text2command.0 (1254) starting. Version 2.3.0 in /opt/iobroker/node_modules/iobroker.text2command, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:36:02.189 - info: tankerkoenig.0 (1224) Start first request 2023-05-15 21:36:02.935 - info: host.raspberrypi instance system.adapter.web.0 started with pid 1280 2023-05-15 21:36:05.930 - info: web.0 (1280) starting. Version 5.3.1 in /opt/iobroker/node_modules/iobroker.web, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:36:06.279 - info: web.0 (1280) socket.io server listening on port 8082 2023-05-15 21:36:06.287 - info: web.0 (1280) simpleAPI server listening on port 8082 2023-05-15 21:36:06.288 - info: web.0 (1280) Allow states only when user is owner: false 2023-05-15 21:36:06.310 - info: web.0 (1280) http server listening on port 8082 2023-05-15 21:45:00.027 - info: javascript.0 (963) script.js.downloads.Shelly-Verbrauch: Shelly Verbrauch: Verbrauchswerte aktualisiert: 4 | Reboots korrigiert: 0 | Unveränderte Werte: 8 ` -
@homoran said in Täglicher Absturz ioBroker + Zugriff auf Raspi:
top
pi@raspberrypi:~ $ top top - 21:44:36 up 10 min, 1 user, load average: 0,12, 0,32, 0,28 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie %CPU(s): 1,6 us, 0,5 sy, 0,0 ni, 97,8 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Spch: 1849,2 total, 531,1 free, 1059,5 used, 258,6 buff/cache MiB Swap: 100,0 total, 100,0 free, 0,0 used. 722,8 avail Spch PID USER PR NI VIRT RES SHR S %CPU %MEM ZEIT+ BEFEHL 467 iobroker 20 0 1053068 225968 40892 S 4,3 11,9 1:45.01 iobroker.js-con 963 iobroker 20 0 886304 166152 41228 S 1,3 8,8 0:41.46 io.javascript.0 1351 pi 20 0 10488 3604 2856 R 1,0 0,2 0:01.13 top 816 iobroker 20 0 870856 91312 41856 S 0,7 4,8 0:09.61 io.telegram.0 1108 iobroker 20 0 687144 105672 36216 S 0,7 5,6 0:49.93 io.shelly.0 1205 iobroker 20 0 658816 69696 36048 S 0,7 3,7 0:05.63 io.simple-api.0 1082 iobroker 20 0 659540 70520 36480 S 0,3 3,7 0:04.71 io.hm-rpc.1 1149 iobroker 20 0 658616 71712 35984 S 0,3 3,8 0:04.29 io.discovery.0 1280 iobroker 20 0 662272 74028 36052 S 0,3 3,9 0:04.34 io.web.0 1317 pi 20 0 16072 4700 3456 S 0,3 0,2 0:00.13 sshd 1 root 20 0 165216 10064 7340 S 0,0 0,5 0:02.16 systemd 2 root 20 0 0 0 0 S 0,0 0,0 0:00.02 kthreadd 3 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_par_gp 5 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 slub_flushwq 6 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 netns 8 root 0 -20 0 0 0 I 0,0 0,0 0:00.52 kworker/0:0H-mmc_complete 9 root 20 0 0 0 0 I 0,0 0,0 0:01.25 kworker/u8:0-events_unbound 10 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 mm_percpu_wq 11 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_kthread 12 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_rude_kthread 13 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_trace_kthread 14 root 20 0 0 0 0 S 0,0 0,0 0:00.07 ksoftirqd/0 15 root 20 0 0 0 0 I 0,0 0,0 0:00.75 rcu_preempt 16 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/0 17 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/0 18 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/1 19 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/1 20 root 20 0 0 0 0 S 0,0 0,0 0:00.03 ksoftirqd/1 23 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/2 24 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/2 25 root 20 0 0 0 0 S 0,0 0,0 0:00.03 ksoftirqd/2 28 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/3 29 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/3 30 root 20 0 0 0 0 S 0,0 0,0 0:00.04 ksoftirqd/3 33 root 20 0 0 0 0 S 0,0 0,0 0:00.01 kdevtmpfs 34 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 inet_frag_wq 36 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kauditd 37 root 20 0 0 0 0 I 0,0 0,0 0:00.02 kworker/0:2-mm_percpu_wq 38 root 20 0 0 0 0 S 0,0 0,0 0:00.00 khungtaskd 39 root 20 0 0 0 0 I 0,0 0,0 0:00.11 kworker/u8:1-events_unbound 40 root 20 0 0 0 0 S 0,0 0,0 0:00.00 oom_reaper 41 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 writeback 42 root 20 0 0 0 0 S 0,0 0,0 0:00.05 kcompactd0 43 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kintegrityd 44 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kblockd 45 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 blkcg_punt_bio 46 root -51 0 0 0 0 S 0,0 0,0 0:00.00 watchdogd 49 root 0 -20 0 0 0 I 0,0 0,0 0:00.05 kworker/3:1H-kblockd 50 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rpciod 51 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 xprtiod 53 root 20 0 0 0 0 I 0,0 0,0 0:00.10 kworker/2:1-events_power_efficient 54 root 20 0 0 0 0 I 0,0 0,0 0:00.05 kworker/1:1-mm_percpu_wq 55 root 20 0 0 0 0 S 0,0 0,0 0:00.02 kswapd0 56 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 nfsiod 57 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kthrotldSkript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 21:45:58 up 11 min, 1 user, load average: 0.03, 0.24, 0.25 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=48.2'C volt=0.9360V *** Time and Time Zones *** Local time: Mon 2023-05-15 21:45:58 CEST Universal time: Mon 2023-05-15 19:45:58 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.8G 1.1G 521M 1.0M 267M 721M Swap: 99M 0B 99M Total: 1.9G 1.1G 621M 1849 M total memory 1060 M used memory 1108 M active memory 116 M inactive memory 521 M free memory 23 M buffer memory 243 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 3.7G 25G 14% / devtmpfs devtmpfs 667M 0 667M 0% /dev tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 370M 1.1M 369M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot /dev/sda1 exfat 29G 2.1G 27G 7% /mnt/usb0 tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon May 15 21:34:04 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:15:C8:D1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ae9ac4e2-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon May 15 21:34:05 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Mon May 15 21:34:05 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Mon May 15 21:34:06 2023] EXT4-fs (mmcblk0p2): recovery complete [Mon May 15 21:34:06 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon May 15 21:34:06 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon May 15 21:34:07 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/mnt/usb0 /dev/sda1 exfat rw,nosuid,nodev,noexec,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro Files in neuralgic directories: /var: 557M /var/ 180M /var/cache 175M /var/cache/apt 155M /var/lib 130M /var/lib/apt/lists Archived and active journals take up 120.0M in the file system. /opt/iobroker/backups: 11M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 319M /opt/iobroker/iobroker-data/ 277M /opt/iobroker/iobroker-data/files 61M /opt/iobroker/iobroker-data/files/vis-2-beta 51M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/telegram.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/objects.jsonl 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.904d455f.js.map 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 9.7M /opt/iobroker/iobroker-data/files/vis-2-beta/material-icons/knx-uf.json 9.7M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "backitup" : 2.6.19 , installed 2.6.19 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.0.12 , installed 1.0.12 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.16 , installed 1.15.16 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "iot" : 1.14.2 , installed 1.14.2 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "shelly" : 6.3.1 , installed 6.3.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 6.3.1 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "text2command" : 2.3.0 , installed 2.3.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "web" : 4.3.0 , installed 5.3.1 Adapter "ws" : 1.3.0 , installed 2.3.1 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 8635 States: 7356 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11098 505/sshd: /usr/sbin tcp 0 0 192.168.178.38:2001 0.0.0.0:* LISTEN 1001 15287 1082/io.hm-rpc.1 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12639 467/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 11111 467/iobroker.js-con tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1001 15241 1056/io.hm-rpc.0 tcp6 0 0 :::22 :::* LISTEN 0 11100 505/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 15762 1205/io.simple-api. tcp6 0 0 :::8082 :::* LISTEN 1001 17506 1280/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 12109 925/io.admin.0 udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 12281 1179/io.broadlink2. udp 0 0 0.0.0.0:60346 0.0.0.0:* 1001 17419 1179/io.broadlink2. udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14850 721/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 10997 340/avahi-daemon: r udp 0 0 0.0.0.0:33312 0.0.0.0:* 108 10999 340/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 15320 1108/io.shelly.0 udp6 0 0 :::5353 :::* 108 10998 340/avahi-daemon: r udp6 0 0 :::41421 :::* 108 11000 340/avahi-daemon: r udp6 0 0 :::546 :::* 0 14861 721/dhcpcd *** Log File - Last 25 Lines *** 2023-05-15 21:35:48.759 - info: alexa2.0 (1004) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-05-15 21:35:49.649 - info: host.raspberrypi instance system.adapter.tankerkoenig.0 started with pid 1224 2023-05-15 21:35:49.753 - info: alexa2.0 (1004) Initialization Done ... 2023-05-15 21:35:49.939 - info: iot.0 (1194) Connection changed: connect 2023-05-15 21:35:50.158 - info: simple-api.0 (1205) starting. Version 2.7.2 in /opt/iobroker/node_modules/iobroker.simple-api, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:35:50.211 - info: simple-api.0 (1205) simpleAPI server listening on port 8087 2023-05-15 21:35:50.215 - info: simple-api.0 (1205) Allow states only when user is owner: false 2023-05-15 21:35:50.245 - info: simple-api.0 (1205) http server listening on port 8087 2023-05-15 21:35:51.653 - info: broadlink2.0 (1179) Poll every 30 secods. 2023-05-15 21:35:51.654 - info: broadlink2.0 (1179) broadlink2.0 started and found 0 devices named 2023-05-15 21:35:51.655 - info: broadlink2.0 (1179) found macs: 2023-05-15 21:35:52.582 - info: tankerkoenig.0 (1224) starting. Version 3.3.7 in /opt/iobroker/node_modules/iobroker.tankerkoenig, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:35:52.636 - info: tankerkoenig.0 (1224) Adapter is already in daemon mode 2023-05-15 21:35:52.637 - info: tankerkoenig.0 (1224) Sync time set to 10 minutes or 600000 ms 2023-05-15 21:35:52.972 - info: host.raspberrypi instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-05-15 21:35:53.173 - info: host.raspberrypi instance system.adapter.text2command.0 started with pid 1254 2023-05-15 21:35:56.457 - info: text2command.0 (1254) starting. Version 2.3.0 in /opt/iobroker/node_modules/iobroker.text2command, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:36:02.189 - info: tankerkoenig.0 (1224) Start first request 2023-05-15 21:36:02.935 - info: host.raspberrypi instance system.adapter.web.0 started with pid 1280 2023-05-15 21:36:05.930 - info: web.0 (1280) starting. Version 5.3.1 in /opt/iobroker/node_modules/iobroker.web, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:36:06.279 - info: web.0 (1280) socket.io server listening on port 8082 2023-05-15 21:36:06.287 - info: web.0 (1280) simpleAPI server listening on port 8082 2023-05-15 21:36:06.288 - info: web.0 (1280) Allow states only when user is owner: false 2023-05-15 21:36:06.310 - info: web.0 (1280) http server listening on port 8082 2023-05-15 21:45:00.027 - info: javascript.0 (963) script.js.downloads.Shelly-Verbrauch: Shelly Verbrauch: Verbrauchswerte aktualisiert: 4 | Reboots korrigiert: 0 | Unveränderte Werte: 8 `top - 21:44:36 up 10 min, 1 user, load average: 0,12, 0,32, 0,28 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie %CPU(s): 1,6 us, 0,5 sy, 0,0 ni, 97,8 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Spch: 1849,2 total, 531,1 free, 1059,5 used, 258,6 buff/cache MiB Swap: 100,0 total, 100,0 free, 0,0 used. 722,8 avail Spchso muss es sein
wobei 1GB wirklich gebrauchtes RAM mir schon etwas hoch vorkommt -
top - 21:44:36 up 10 min, 1 user, load average: 0,12, 0,32, 0,28 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie %CPU(s): 1,6 us, 0,5 sy, 0,0 ni, 97,8 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Spch: 1849,2 total, 531,1 free, 1059,5 used, 258,6 buff/cache MiB Swap: 100,0 total, 100,0 free, 0,0 used. 722,8 avail Spchso muss es sein
wobei 1GB wirklich gebrauchtes RAM mir schon etwas hoch vorkommt -
@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@Glasfaser
Heisst also eine 64GB SD Karte und den ganzen Spass von vorne, oder...??Nein ...
Dein Arbeitsspeicher mit 1,8G geht dir aus ..Den Fehler dazu müssen wir erst einkreisen .
Deshalb :
@glasfaser sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Ich "vermute" ein javascript Programm läuft bei dir Amok ,sehe wir später mal nach .
@glasfaser
Ich komme ja im Moment nicht auf den Raspi. -
@homoran
Das heisst was?Er lüppt erstmal gut
PID USER PR NI VIRT RES SHR S %CPU %MEM ZEIT+ BEFEHL 467 iobroker 20 0 1053068 225968 40892 S 4,3 11,9 1:45.01 iobroker.js-con 963 iobroker 20 0 886304 166152 41228 S 1,3 8,8 0:41.46 io.javascript.0beobachte mit
topio.javascript.0
wann er den MEM überflutet .
Was hast du alles an Scripte / Blockly
-
@glasfaser
Ich komme ja im Moment nicht auf den Raspi.@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Ich komme ja im Moment nicht auf den Raspi.
Du hast doch gerade alle Werte uns hier geliefert !?
Synology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
@glasfaser
Ich komme ja im Moment nicht auf den Raspi.@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@glasfaser
Ich komme ja im Moment nicht auf den Raspi.warum nicht?
wie versuchst du es? -
Er lüppt erstmal gut
PID USER PR NI VIRT RES SHR S %CPU %MEM ZEIT+ BEFEHL 467 iobroker 20 0 1053068 225968 40892 S 4,3 11,9 1:45.01 iobroker.js-con 963 iobroker 20 0 886304 166152 41228 S 1,3 8,8 0:41.46 io.javascript.0beobachte mit
topio.javascript.0
wann er den MEM überflutet .
Was hast du alles an Scripte / Blockly
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann! -
@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Ich komme ja im Moment nicht auf den Raspi.
Du hast doch gerade alle Werte uns hier geliefert !?
@glasfaser aber anscheinend nicht auf den admin via Browser
-
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!der läuft
-
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!Kommst du mit dem Browser nicht auf den Admin !?
Sollte laut Log funktionieren !
-
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann! -
@homoran
Update:
Die Instanz VIS Runtime und Visualisierung werden wieder angezeigt, aber sind nicht aufzurufen. Da ich aber den ganzen Tag mit dem Problem beschäftigt war, bitte ich Euch mir morgen weiter zu helfen.
Gruß und Danke!!
692
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge