Täglicher Absturz ioBroker + Zugriff auf Raspi [gelöst]

Glasfaser

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@Glasfaser
Heisst also eine 64GB SD Karte und den ganzen Spass von vorne, oder...??

Nein ...
Dein Arbeitsspeicher mit 1,8G geht dir aus ..

Den Fehler dazu müssen wir erst einkreisen .

Deshalb :

@glasfaser sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

Ich "vermute" ein javascript Programm läuft bei dir Amok ,sehe wir später mal nach .

searcher57

@homoran
Nein!

Homoran

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@Glasfaser
Heisst also eine 64GB SD Karte und den ganzen Spass von vorne, oder...??

neue Karte wäre gut, aber dein Problem scheint der RAM (Arbeitsspeicher) zu sein, nicht der "Festplatten"platz

searcher57

@glasfaser
Also Reset??

Homoran

@searcher57 Augen zu und durch!

searcher57

@homoran
Also die LED's leben wieder! Über Putty komme ich auch auf den Raspi. Aber nicht auf ioBroker!

Homoran

@searcher57 iob status

und dann die Aufträge von @Glasfaser

Homoran

@glasfaser sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@searcher57

Er lüppt sowiso nichts mehr ...
ziehe den Stecker

EDIT :

wenn er wieder da ist ,

dann einmal
top
zeigen

und
iob diag

searcher57

@homoran

pi@raspberrypi:~ $ iob status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl
pi@raspberrypi:~ $

Glasfaser

@searcher57

Kommt da noch was ... siehe oben die Anfrage !

searcher57

@homoran said in Täglicher Absturz ioBroker + Zugriff auf Raspi:

top


pi@raspberrypi:~ $ top
top - 21:44:36 up 10 min,  1 user,  load average: 0,12, 0,32, 0,28
Tasks: 163 total,   1 running, 162 sleeping,   0 stopped,   0 zombie
%CPU(s):  1,6 us,  0,5 sy,  0,0 ni, 97,8 id,  0,0 wa,  0,0 hi,  0,2 si,  0,0 st
MiB Spch:   1849,2 total,    531,1 free,   1059,5 used,    258,6 buff/cache
MiB Swap:    100,0 total,    100,0 free,      0,0 used.    722,8 avail Spch

    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     ZEIT+ BEFEHL
    467 iobroker  20   0 1053068 225968  40892 S   4,3  11,9   1:45.01 iobroker.js-con
    963 iobroker  20   0  886304 166152  41228 S   1,3   8,8   0:41.46 io.javascript.0
   1351 pi        20   0   10488   3604   2856 R   1,0   0,2   0:01.13 top
    816 iobroker  20   0  870856  91312  41856 S   0,7   4,8   0:09.61 io.telegram.0
   1108 iobroker  20   0  687144 105672  36216 S   0,7   5,6   0:49.93 io.shelly.0
   1205 iobroker  20   0  658816  69696  36048 S   0,7   3,7   0:05.63 io.simple-api.0
   1082 iobroker  20   0  659540  70520  36480 S   0,3   3,7   0:04.71 io.hm-rpc.1
   1149 iobroker  20   0  658616  71712  35984 S   0,3   3,8   0:04.29 io.discovery.0
   1280 iobroker  20   0  662272  74028  36052 S   0,3   3,9   0:04.34 io.web.0
   1317 pi        20   0   16072   4700   3456 S   0,3   0,2   0:00.13 sshd
      1 root      20   0  165216  10064   7340 S   0,0   0,5   0:02.16 systemd
      2 root      20   0       0      0      0 S   0,0   0,0   0:00.02 kthreadd
      3 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 rcu_gp
      4 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 rcu_par_gp
      5 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 slub_flushwq
      6 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 netns
      8 root       0 -20       0      0      0 I   0,0   0,0   0:00.52 kworker/0:0H-mmc_complete
      9 root      20   0       0      0      0 I   0,0   0,0   0:01.25 kworker/u8:0-events_unbound
     10 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 mm_percpu_wq
     11 root      20   0       0      0      0 I   0,0   0,0   0:00.00 rcu_tasks_kthread
     12 root      20   0       0      0      0 I   0,0   0,0   0:00.00 rcu_tasks_rude_kthread
     13 root      20   0       0      0      0 I   0,0   0,0   0:00.00 rcu_tasks_trace_kthread
     14 root      20   0       0      0      0 S   0,0   0,0   0:00.07 ksoftirqd/0
     15 root      20   0       0      0      0 I   0,0   0,0   0:00.75 rcu_preempt
     16 root      rt   0       0      0      0 S   0,0   0,0   0:00.00 migration/0
     17 root      20   0       0      0      0 S   0,0   0,0   0:00.00 cpuhp/0
     18 root      20   0       0      0      0 S   0,0   0,0   0:00.00 cpuhp/1
     19 root      rt   0       0      0      0 S   0,0   0,0   0:00.00 migration/1
     20 root      20   0       0      0      0 S   0,0   0,0   0:00.03 ksoftirqd/1
     23 root      20   0       0      0      0 S   0,0   0,0   0:00.00 cpuhp/2
     24 root      rt   0       0      0      0 S   0,0   0,0   0:00.00 migration/2
     25 root      20   0       0      0      0 S   0,0   0,0   0:00.03 ksoftirqd/2
     28 root      20   0       0      0      0 S   0,0   0,0   0:00.00 cpuhp/3
     29 root      rt   0       0      0      0 S   0,0   0,0   0:00.00 migration/3
     30 root      20   0       0      0      0 S   0,0   0,0   0:00.04 ksoftirqd/3
     33 root      20   0       0      0      0 S   0,0   0,0   0:00.01 kdevtmpfs
     34 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 inet_frag_wq
     36 root      20   0       0      0      0 S   0,0   0,0   0:00.00 kauditd
     37 root      20   0       0      0      0 I   0,0   0,0   0:00.02 kworker/0:2-mm_percpu_wq
     38 root      20   0       0      0      0 S   0,0   0,0   0:00.00 khungtaskd
     39 root      20   0       0      0      0 I   0,0   0,0   0:00.11 kworker/u8:1-events_unbound
     40 root      20   0       0      0      0 S   0,0   0,0   0:00.00 oom_reaper
     41 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 writeback
     42 root      20   0       0      0      0 S   0,0   0,0   0:00.05 kcompactd0
     43 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 kintegrityd
     44 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 kblockd
     45 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 blkcg_punt_bio
     46 root     -51   0       0      0      0 S   0,0   0,0   0:00.00 watchdogd
     49 root       0 -20       0      0      0 I   0,0   0,0   0:00.05 kworker/3:1H-kblockd
     50 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 rpciod
     51 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 xprtiod
     53 root      20   0       0      0      0 I   0,0   0,0   0:00.10 kworker/2:1-events_power_efficient
     54 root      20   0       0      0      0 I   0,0   0,0   0:00.05 kworker/1:1-mm_percpu_wq
     55 root      20   0       0      0      0 S   0,0   0,0   0:00.02 kswapd0
     56 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 nfsiod
     57 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 kthrotld

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 21:45:58 up 11 min,  1 user,  load average: 0.03, 0.24, 0.25
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=48.2'C
volt=0.9360V

*** Time and Time Zones ***
               Local time: Mon 2023-05-15 21:45:58 CEST
           Universal time: Mon 2023-05-15 19:45:58 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            1.8G        1.1G        521M        1.0M        267M        721M
Swap:            99M          0B         99M
Total:          1.9G        1.1G        621M

         1849 M total memory
         1060 M used memory
         1108 M active memory
          116 M inactive memory
          521 M free memory
           23 M buffer memory
          243 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G  3.7G   25G  14% /
devtmpfs       devtmpfs  667M     0  667M   0% /dev
tmpfs          tmpfs     925M     0  925M   0% /dev/shm
tmpfs          tmpfs     370M  1.1M  369M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   31M  225M  13% /boot
/dev/sda1      exfat      29G  2.1G   27G   7% /mnt/usb0
tmpfs          tmpfs     185M     0  185M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon May 15 21:34:04 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:15:C8:D1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=ae9ac4e2-02 rootfstype=ext4 fsck.repair=yes rootwait
[Mon May 15 21:34:05 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Mon May 15 21:34:05 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Mon May 15 21:34:06 2023] EXT4-fs (mmcblk0p2): recovery complete
[Mon May 15 21:34:06 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Mon May 15 21:34:06 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Mon May 15 21:34:07 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET      SOURCE         FSTYPE OPTIONS
/           /dev/mmcblk0p2 ext4   rw,noatime
|-/boot     /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
`-/mnt/usb0 /dev/sda1      exfat  rw,nosuid,nodev,noexec,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro

Files in neuralgic directories:

/var:
557M    /var/
180M    /var/cache
175M    /var/cache/apt
155M    /var/lib
130M    /var/lib/apt/lists

Archived and active journals take up 120.0M in the file system.

/opt/iobroker/backups:
11M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
319M    /opt/iobroker/iobroker-data/
277M    /opt/iobroker/iobroker-data/files
61M     /opt/iobroker/iobroker-data/files/vis-2-beta
51M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/telegram.admin

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/objects.jsonl
19M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.904d455f.js.map
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map
9.7M    /opt/iobroker/iobroker-data/files/vis-2-beta/material-icons/knx-uf.json
9.7M    /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.broadlink2.0             : broadlink2            : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : raspberrypi                              -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi                              -  enabled
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : raspberrypi                              -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "broadlink2"   : 2.1.5    , installed 2.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.0.12   , installed 1.0.12
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.16  , installed 1.15.16
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "iot"          : 1.14.2   , installed 1.14.2
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "shelly"       : 6.3.1    , installed 6.3.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 6.3.1
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.15.2   , installed 1.15.2
Adapter    "text2command" : 2.3.0    , installed 2.3.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "web"          : 4.3.0    , installed 5.3.1
Adapter    "ws"           : 1.3.0    , installed 2.3.1
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        8635
States:         7356

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11098      505/sshd: /usr/sbin
tcp        0      0 192.168.178.38:2001     0.0.0.0:*               LISTEN      1001       15287      1082/io.hm-rpc.1
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       12639      467/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       11111      467/iobroker.js-con
tcp        0      0 0.0.0.0:2010            0.0.0.0:*               LISTEN      1001       15241      1056/io.hm-rpc.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          11100      505/sshd: /usr/sbin
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       15762      1205/io.simple-api.
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       17506      1280/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       12109      925/io.admin.0
udp        0      0 0.0.0.0:15001           0.0.0.0:*                           1001       12281      1179/io.broadlink2.
udp        0      0 0.0.0.0:60346           0.0.0.0:*                           1001       17419      1179/io.broadlink2.
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14850      721/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        10997      340/avahi-daemon: r
udp        0      0 0.0.0.0:33312           0.0.0.0:*                           108        10999      340/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       15320      1108/io.shelly.0
udp6       0      0 :::5353                 :::*                                108        10998      340/avahi-daemon: r
udp6       0      0 :::41421                :::*                                108        11000      340/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          14861      721/dhcpcd

*** Log File - Last 25 Lines ***

2023-05-15 21:35:48.759  - info: alexa2.0 (1004) Alexa-Push-Connection (macDms = true) established. Disable Polling
2023-05-15 21:35:49.649  - info: host.raspberrypi instance system.adapter.tankerkoenig.0 started with pid 1224
2023-05-15 21:35:49.753  - info: alexa2.0 (1004) Initialization Done ...
2023-05-15 21:35:49.939  - info: iot.0 (1194) Connection changed: connect
2023-05-15 21:35:50.158  - info: simple-api.0 (1205) starting. Version 2.7.2 in /opt/iobroker/node_modules/iobroker.simple-api, node: v18.16.0, js-controller: 4.0.24
2023-05-15 21:35:50.211  - info: simple-api.0 (1205) simpleAPI server listening on port 8087
2023-05-15 21:35:50.215  - info: simple-api.0 (1205) Allow states only when user is owner: false
2023-05-15 21:35:50.245  - info: simple-api.0 (1205) http server listening on port 8087
2023-05-15 21:35:51.653  - info: broadlink2.0 (1179) Poll every 30 secods.
2023-05-15 21:35:51.654  - info: broadlink2.0 (1179) broadlink2.0 started and found 0 devices named
2023-05-15 21:35:51.655  - info: broadlink2.0 (1179) found macs:
2023-05-15 21:35:52.582  - info: tankerkoenig.0 (1224) starting. Version 3.3.7 in /opt/iobroker/node_modules/iobroker.tankerkoenig, node: v18.16.0, js-controller: 4.0.24
2023-05-15 21:35:52.636  - info: tankerkoenig.0 (1224) Adapter is already in daemon mode
2023-05-15 21:35:52.637  - info: tankerkoenig.0 (1224) Sync time set to 10 minutes or 600000 ms
2023-05-15 21:35:52.972  - info: host.raspberrypi instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-05-15 21:35:53.173  - info: host.raspberrypi instance system.adapter.text2command.0 started with pid 1254
2023-05-15 21:35:56.457  - info: text2command.0 (1254) starting. Version 2.3.0 in /opt/iobroker/node_modules/iobroker.text2command, node: v18.16.0, js-controller: 4.0.24
2023-05-15 21:36:02.189  - info: tankerkoenig.0 (1224) Start first request
2023-05-15 21:36:02.935  - info: host.raspberrypi instance system.adapter.web.0 started with pid 1280
2023-05-15 21:36:05.930  - info: web.0 (1280) starting. Version 5.3.1 in /opt/iobroker/node_modules/iobroker.web, node: v18.16.0, js-controller: 4.0.24
2023-05-15 21:36:06.279  - info: web.0 (1280) socket.io server listening on port 8082
2023-05-15 21:36:06.287  - info: web.0 (1280) simpleAPI server listening on port 8082
2023-05-15 21:36:06.288  - info: web.0 (1280) Allow states only when user is owner: false
2023-05-15 21:36:06.310  - info: web.0 (1280) http server listening on port 8082
2023-05-15 21:45:00.027  - info: javascript.0 (963) script.js.downloads.Shelly-Verbrauch: Shelly Verbrauch: Verbrauchswerte aktualisiert: 4 | Reboots korrigiert: 0 | Unveränderte Werte: 8

`

Homoran

@searcher57

top - 21:44:36 up 10 min,  1 user,  load average: 0,12, 0,32, 0,28
Tasks: 163 total,   1 running, 162 sleeping,   0 stopped,   0 zombie
%CPU(s):  1,6 us,  0,5 sy,  0,0 ni, 97,8 id,  0,0 wa,  0,0 hi,  0,2 si,  0,0 st
MiB Spch:   1849,2 total,    531,1 free,   1059,5 used,    258,6 buff/cache 
MiB Swap:    100,0 total,    100,0 free,      0,0 used.    722,8 avail Spch

so muss es sein
wobei 1GB wirklich gebrauchtes RAM mir schon etwas hoch vorkommt

searcher57

@homoran
Das heisst was?

searcher57

@glasfaser
Ich komme ja im Moment nicht auf den Raspi.

Glasfaser

@searcher57

Er lüppt erstmal gut

    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     ZEIT+ BEFEHL
    467 iobroker  20   0 1053068 225968  40892 S   4,3  11,9   1:45.01 iobroker.js-con
    963 iobroker  20   0  886304 166152  41228 S   1,3   8,8   0:41.46 io.javascript.0

beobachte mit

top

io.javascript.0

wann er den MEM überflutet .

Was hast du alles an Scripte / Blockly

Glasfaser

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

Ich komme ja im Moment nicht auf den Raspi.

Du hast doch gerade alle Werte uns hier geliefert !?

Homoran

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@glasfaser
Ich komme ja im Moment nicht auf den Raspi.

warum nicht?
wie versuchst du es?

searcher57

@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!

Homoran

@glasfaser aber anscheinend nicht auf den admin via Browser

Homoran

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!

der läuft

Community Forum

NEWS

Täglicher Absturz ioBroker + Zugriff auf Raspi [gelöst]

Support us

757

32.5k

81.7k

1.3m