NEWS
Täglicher Absturz ioBroker + Zugriff auf Raspi [gelöst]
ioBroker Allgemein
340
Beiträge
5
Kommentatoren
66.1k
Aufrufe
4
Watching
-
@Glasfaser
Heisst also eine 64GB SD Karte und den ganzen Spass von vorne, oder...??@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@Glasfaser
Heisst also eine 64GB SD Karte und den ganzen Spass von vorne, oder...??neue Karte wäre gut, aber dein Problem scheint der RAM (Arbeitsspeicher) zu sein, nicht der "Festplatten"platz
-
@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@Glasfaser
Heisst also eine 64GB SD Karte und den ganzen Spass von vorne, oder...??Nein ...
Dein Arbeitsspeicher mit 1,8G geht dir aus ..Den Fehler dazu müssen wir erst einkreisen .
Deshalb :
@glasfaser sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Ich "vermute" ein javascript Programm läuft bei dir Amok ,sehe wir später mal nach .
-
@glasfaser
Also Reset??@searcher57 Augen zu und durch!
-
@searcher57 Augen zu und durch!
@homoran
Also die LED's leben wieder! Über Putty komme ich auch auf den Raspi. Aber nicht auf ioBroker! -
@searcher57
iob statusund dann die Aufträge von @Glasfaser
-
Er lüppt sowiso nichts mehr ...
ziehe den SteckerEDIT :
wenn er wieder da ist ,
dann einmal
topzeigen
und
iob diag@glasfaser sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Er lüppt sowiso nichts mehr ...
ziehe den SteckerEDIT :
wenn er wieder da ist ,
dann einmal
topzeigen
und
iob diag -
@searcher57
iob statusund dann die Aufträge von @Glasfaser
-
pi@raspberrypi:~ $ iob status iobroker is running on this host. Objects type: jsonl States type: jsonl pi@raspberrypi:~ $Kommt da noch was ... siehe oben die Anfrage !
-
@glasfaser sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Er lüppt sowiso nichts mehr ...
ziehe den SteckerEDIT :
wenn er wieder da ist ,
dann einmal
topzeigen
und
iob diag@homoran said in Täglicher Absturz ioBroker + Zugriff auf Raspi:
top
pi@raspberrypi:~ $ top top - 21:44:36 up 10 min, 1 user, load average: 0,12, 0,32, 0,28 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie %CPU(s): 1,6 us, 0,5 sy, 0,0 ni, 97,8 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Spch: 1849,2 total, 531,1 free, 1059,5 used, 258,6 buff/cache MiB Swap: 100,0 total, 100,0 free, 0,0 used. 722,8 avail Spch PID USER PR NI VIRT RES SHR S %CPU %MEM ZEIT+ BEFEHL 467 iobroker 20 0 1053068 225968 40892 S 4,3 11,9 1:45.01 iobroker.js-con 963 iobroker 20 0 886304 166152 41228 S 1,3 8,8 0:41.46 io.javascript.0 1351 pi 20 0 10488 3604 2856 R 1,0 0,2 0:01.13 top 816 iobroker 20 0 870856 91312 41856 S 0,7 4,8 0:09.61 io.telegram.0 1108 iobroker 20 0 687144 105672 36216 S 0,7 5,6 0:49.93 io.shelly.0 1205 iobroker 20 0 658816 69696 36048 S 0,7 3,7 0:05.63 io.simple-api.0 1082 iobroker 20 0 659540 70520 36480 S 0,3 3,7 0:04.71 io.hm-rpc.1 1149 iobroker 20 0 658616 71712 35984 S 0,3 3,8 0:04.29 io.discovery.0 1280 iobroker 20 0 662272 74028 36052 S 0,3 3,9 0:04.34 io.web.0 1317 pi 20 0 16072 4700 3456 S 0,3 0,2 0:00.13 sshd 1 root 20 0 165216 10064 7340 S 0,0 0,5 0:02.16 systemd 2 root 20 0 0 0 0 S 0,0 0,0 0:00.02 kthreadd 3 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_par_gp 5 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 slub_flushwq 6 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 netns 8 root 0 -20 0 0 0 I 0,0 0,0 0:00.52 kworker/0:0H-mmc_complete 9 root 20 0 0 0 0 I 0,0 0,0 0:01.25 kworker/u8:0-events_unbound 10 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 mm_percpu_wq 11 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_kthread 12 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_rude_kthread 13 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_trace_kthread 14 root 20 0 0 0 0 S 0,0 0,0 0:00.07 ksoftirqd/0 15 root 20 0 0 0 0 I 0,0 0,0 0:00.75 rcu_preempt 16 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/0 17 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/0 18 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/1 19 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/1 20 root 20 0 0 0 0 S 0,0 0,0 0:00.03 ksoftirqd/1 23 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/2 24 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/2 25 root 20 0 0 0 0 S 0,0 0,0 0:00.03 ksoftirqd/2 28 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/3 29 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/3 30 root 20 0 0 0 0 S 0,0 0,0 0:00.04 ksoftirqd/3 33 root 20 0 0 0 0 S 0,0 0,0 0:00.01 kdevtmpfs 34 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 inet_frag_wq 36 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kauditd 37 root 20 0 0 0 0 I 0,0 0,0 0:00.02 kworker/0:2-mm_percpu_wq 38 root 20 0 0 0 0 S 0,0 0,0 0:00.00 khungtaskd 39 root 20 0 0 0 0 I 0,0 0,0 0:00.11 kworker/u8:1-events_unbound 40 root 20 0 0 0 0 S 0,0 0,0 0:00.00 oom_reaper 41 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 writeback 42 root 20 0 0 0 0 S 0,0 0,0 0:00.05 kcompactd0 43 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kintegrityd 44 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kblockd 45 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 blkcg_punt_bio 46 root -51 0 0 0 0 S 0,0 0,0 0:00.00 watchdogd 49 root 0 -20 0 0 0 I 0,0 0,0 0:00.05 kworker/3:1H-kblockd 50 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rpciod 51 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 xprtiod 53 root 20 0 0 0 0 I 0,0 0,0 0:00.10 kworker/2:1-events_power_efficient 54 root 20 0 0 0 0 I 0,0 0,0 0:00.05 kworker/1:1-mm_percpu_wq 55 root 20 0 0 0 0 S 0,0 0,0 0:00.02 kswapd0 56 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 nfsiod 57 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kthrotldSkript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 21:45:58 up 11 min, 1 user, load average: 0.03, 0.24, 0.25 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=48.2'C volt=0.9360V *** Time and Time Zones *** Local time: Mon 2023-05-15 21:45:58 CEST Universal time: Mon 2023-05-15 19:45:58 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.8G 1.1G 521M 1.0M 267M 721M Swap: 99M 0B 99M Total: 1.9G 1.1G 621M 1849 M total memory 1060 M used memory 1108 M active memory 116 M inactive memory 521 M free memory 23 M buffer memory 243 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 3.7G 25G 14% / devtmpfs devtmpfs 667M 0 667M 0% /dev tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 370M 1.1M 369M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot /dev/sda1 exfat 29G 2.1G 27G 7% /mnt/usb0 tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon May 15 21:34:04 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:15:C8:D1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ae9ac4e2-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon May 15 21:34:05 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Mon May 15 21:34:05 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Mon May 15 21:34:06 2023] EXT4-fs (mmcblk0p2): recovery complete [Mon May 15 21:34:06 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon May 15 21:34:06 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon May 15 21:34:07 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/mnt/usb0 /dev/sda1 exfat rw,nosuid,nodev,noexec,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro Files in neuralgic directories: /var: 557M /var/ 180M /var/cache 175M /var/cache/apt 155M /var/lib 130M /var/lib/apt/lists Archived and active journals take up 120.0M in the file system. /opt/iobroker/backups: 11M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 319M /opt/iobroker/iobroker-data/ 277M /opt/iobroker/iobroker-data/files 61M /opt/iobroker/iobroker-data/files/vis-2-beta 51M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/telegram.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/objects.jsonl 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.904d455f.js.map 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 9.7M /opt/iobroker/iobroker-data/files/vis-2-beta/material-icons/knx-uf.json 9.7M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "backitup" : 2.6.19 , installed 2.6.19 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.0.12 , installed 1.0.12 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.16 , installed 1.15.16 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "iot" : 1.14.2 , installed 1.14.2 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "shelly" : 6.3.1 , installed 6.3.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 6.3.1 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "text2command" : 2.3.0 , installed 2.3.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "web" : 4.3.0 , installed 5.3.1 Adapter "ws" : 1.3.0 , installed 2.3.1 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 8635 States: 7356 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11098 505/sshd: /usr/sbin tcp 0 0 192.168.178.38:2001 0.0.0.0:* LISTEN 1001 15287 1082/io.hm-rpc.1 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12639 467/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 11111 467/iobroker.js-con tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1001 15241 1056/io.hm-rpc.0 tcp6 0 0 :::22 :::* LISTEN 0 11100 505/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 15762 1205/io.simple-api. tcp6 0 0 :::8082 :::* LISTEN 1001 17506 1280/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 12109 925/io.admin.0 udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 12281 1179/io.broadlink2. udp 0 0 0.0.0.0:60346 0.0.0.0:* 1001 17419 1179/io.broadlink2. udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14850 721/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 10997 340/avahi-daemon: r udp 0 0 0.0.0.0:33312 0.0.0.0:* 108 10999 340/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 15320 1108/io.shelly.0 udp6 0 0 :::5353 :::* 108 10998 340/avahi-daemon: r udp6 0 0 :::41421 :::* 108 11000 340/avahi-daemon: r udp6 0 0 :::546 :::* 0 14861 721/dhcpcd *** Log File - Last 25 Lines *** 2023-05-15 21:35:48.759 - info: alexa2.0 (1004) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-05-15 21:35:49.649 - info: host.raspberrypi instance system.adapter.tankerkoenig.0 started with pid 1224 2023-05-15 21:35:49.753 - info: alexa2.0 (1004) Initialization Done ... 2023-05-15 21:35:49.939 - info: iot.0 (1194) Connection changed: connect 2023-05-15 21:35:50.158 - info: simple-api.0 (1205) starting. Version 2.7.2 in /opt/iobroker/node_modules/iobroker.simple-api, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:35:50.211 - info: simple-api.0 (1205) simpleAPI server listening on port 8087 2023-05-15 21:35:50.215 - info: simple-api.0 (1205) Allow states only when user is owner: false 2023-05-15 21:35:50.245 - info: simple-api.0 (1205) http server listening on port 8087 2023-05-15 21:35:51.653 - info: broadlink2.0 (1179) Poll every 30 secods. 2023-05-15 21:35:51.654 - info: broadlink2.0 (1179) broadlink2.0 started and found 0 devices named 2023-05-15 21:35:51.655 - info: broadlink2.0 (1179) found macs: 2023-05-15 21:35:52.582 - info: tankerkoenig.0 (1224) starting. Version 3.3.7 in /opt/iobroker/node_modules/iobroker.tankerkoenig, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:35:52.636 - info: tankerkoenig.0 (1224) Adapter is already in daemon mode 2023-05-15 21:35:52.637 - info: tankerkoenig.0 (1224) Sync time set to 10 minutes or 600000 ms 2023-05-15 21:35:52.972 - info: host.raspberrypi instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-05-15 21:35:53.173 - info: host.raspberrypi instance system.adapter.text2command.0 started with pid 1254 2023-05-15 21:35:56.457 - info: text2command.0 (1254) starting. Version 2.3.0 in /opt/iobroker/node_modules/iobroker.text2command, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:36:02.189 - info: tankerkoenig.0 (1224) Start first request 2023-05-15 21:36:02.935 - info: host.raspberrypi instance system.adapter.web.0 started with pid 1280 2023-05-15 21:36:05.930 - info: web.0 (1280) starting. Version 5.3.1 in /opt/iobroker/node_modules/iobroker.web, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:36:06.279 - info: web.0 (1280) socket.io server listening on port 8082 2023-05-15 21:36:06.287 - info: web.0 (1280) simpleAPI server listening on port 8082 2023-05-15 21:36:06.288 - info: web.0 (1280) Allow states only when user is owner: false 2023-05-15 21:36:06.310 - info: web.0 (1280) http server listening on port 8082 2023-05-15 21:45:00.027 - info: javascript.0 (963) script.js.downloads.Shelly-Verbrauch: Shelly Verbrauch: Verbrauchswerte aktualisiert: 4 | Reboots korrigiert: 0 | Unveränderte Werte: 8 ` -
@homoran said in Täglicher Absturz ioBroker + Zugriff auf Raspi:
top
pi@raspberrypi:~ $ top top - 21:44:36 up 10 min, 1 user, load average: 0,12, 0,32, 0,28 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie %CPU(s): 1,6 us, 0,5 sy, 0,0 ni, 97,8 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Spch: 1849,2 total, 531,1 free, 1059,5 used, 258,6 buff/cache MiB Swap: 100,0 total, 100,0 free, 0,0 used. 722,8 avail Spch PID USER PR NI VIRT RES SHR S %CPU %MEM ZEIT+ BEFEHL 467 iobroker 20 0 1053068 225968 40892 S 4,3 11,9 1:45.01 iobroker.js-con 963 iobroker 20 0 886304 166152 41228 S 1,3 8,8 0:41.46 io.javascript.0 1351 pi 20 0 10488 3604 2856 R 1,0 0,2 0:01.13 top 816 iobroker 20 0 870856 91312 41856 S 0,7 4,8 0:09.61 io.telegram.0 1108 iobroker 20 0 687144 105672 36216 S 0,7 5,6 0:49.93 io.shelly.0 1205 iobroker 20 0 658816 69696 36048 S 0,7 3,7 0:05.63 io.simple-api.0 1082 iobroker 20 0 659540 70520 36480 S 0,3 3,7 0:04.71 io.hm-rpc.1 1149 iobroker 20 0 658616 71712 35984 S 0,3 3,8 0:04.29 io.discovery.0 1280 iobroker 20 0 662272 74028 36052 S 0,3 3,9 0:04.34 io.web.0 1317 pi 20 0 16072 4700 3456 S 0,3 0,2 0:00.13 sshd 1 root 20 0 165216 10064 7340 S 0,0 0,5 0:02.16 systemd 2 root 20 0 0 0 0 S 0,0 0,0 0:00.02 kthreadd 3 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_par_gp 5 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 slub_flushwq 6 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 netns 8 root 0 -20 0 0 0 I 0,0 0,0 0:00.52 kworker/0:0H-mmc_complete 9 root 20 0 0 0 0 I 0,0 0,0 0:01.25 kworker/u8:0-events_unbound 10 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 mm_percpu_wq 11 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_kthread 12 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_rude_kthread 13 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tasks_trace_kthread 14 root 20 0 0 0 0 S 0,0 0,0 0:00.07 ksoftirqd/0 15 root 20 0 0 0 0 I 0,0 0,0 0:00.75 rcu_preempt 16 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/0 17 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/0 18 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/1 19 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/1 20 root 20 0 0 0 0 S 0,0 0,0 0:00.03 ksoftirqd/1 23 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/2 24 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/2 25 root 20 0 0 0 0 S 0,0 0,0 0:00.03 ksoftirqd/2 28 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/3 29 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/3 30 root 20 0 0 0 0 S 0,0 0,0 0:00.04 ksoftirqd/3 33 root 20 0 0 0 0 S 0,0 0,0 0:00.01 kdevtmpfs 34 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 inet_frag_wq 36 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kauditd 37 root 20 0 0 0 0 I 0,0 0,0 0:00.02 kworker/0:2-mm_percpu_wq 38 root 20 0 0 0 0 S 0,0 0,0 0:00.00 khungtaskd 39 root 20 0 0 0 0 I 0,0 0,0 0:00.11 kworker/u8:1-events_unbound 40 root 20 0 0 0 0 S 0,0 0,0 0:00.00 oom_reaper 41 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 writeback 42 root 20 0 0 0 0 S 0,0 0,0 0:00.05 kcompactd0 43 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kintegrityd 44 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kblockd 45 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 blkcg_punt_bio 46 root -51 0 0 0 0 S 0,0 0,0 0:00.00 watchdogd 49 root 0 -20 0 0 0 I 0,0 0,0 0:00.05 kworker/3:1H-kblockd 50 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rpciod 51 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 xprtiod 53 root 20 0 0 0 0 I 0,0 0,0 0:00.10 kworker/2:1-events_power_efficient 54 root 20 0 0 0 0 I 0,0 0,0 0:00.05 kworker/1:1-mm_percpu_wq 55 root 20 0 0 0 0 S 0,0 0,0 0:00.02 kswapd0 56 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 nfsiod 57 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kthrotldSkript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 21:45:58 up 11 min, 1 user, load average: 0.03, 0.24, 0.25 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=48.2'C volt=0.9360V *** Time and Time Zones *** Local time: Mon 2023-05-15 21:45:58 CEST Universal time: Mon 2023-05-15 19:45:58 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.8G 1.1G 521M 1.0M 267M 721M Swap: 99M 0B 99M Total: 1.9G 1.1G 621M 1849 M total memory 1060 M used memory 1108 M active memory 116 M inactive memory 521 M free memory 23 M buffer memory 243 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 3.7G 25G 14% / devtmpfs devtmpfs 667M 0 667M 0% /dev tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 370M 1.1M 369M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot /dev/sda1 exfat 29G 2.1G 27G 7% /mnt/usb0 tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon May 15 21:34:04 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:15:C8:D1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ae9ac4e2-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon May 15 21:34:05 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Mon May 15 21:34:05 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Mon May 15 21:34:06 2023] EXT4-fs (mmcblk0p2): recovery complete [Mon May 15 21:34:06 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon May 15 21:34:06 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon May 15 21:34:07 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/mnt/usb0 /dev/sda1 exfat rw,nosuid,nodev,noexec,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro Files in neuralgic directories: /var: 557M /var/ 180M /var/cache 175M /var/cache/apt 155M /var/lib 130M /var/lib/apt/lists Archived and active journals take up 120.0M in the file system. /opt/iobroker/backups: 11M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 319M /opt/iobroker/iobroker-data/ 277M /opt/iobroker/iobroker-data/files 61M /opt/iobroker/iobroker-data/files/vis-2-beta 51M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/telegram.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/objects.jsonl 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.904d455f.js.map 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 9.7M /opt/iobroker/iobroker-data/files/vis-2-beta/material-icons/knx-uf.json 9.7M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "backitup" : 2.6.19 , installed 2.6.19 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.0.12 , installed 1.0.12 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.16 , installed 1.15.16 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "iot" : 1.14.2 , installed 1.14.2 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "shelly" : 6.3.1 , installed 6.3.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 6.3.1 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "text2command" : 2.3.0 , installed 2.3.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "web" : 4.3.0 , installed 5.3.1 Adapter "ws" : 1.3.0 , installed 2.3.1 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 8635 States: 7356 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11098 505/sshd: /usr/sbin tcp 0 0 192.168.178.38:2001 0.0.0.0:* LISTEN 1001 15287 1082/io.hm-rpc.1 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12639 467/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 11111 467/iobroker.js-con tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1001 15241 1056/io.hm-rpc.0 tcp6 0 0 :::22 :::* LISTEN 0 11100 505/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 15762 1205/io.simple-api. tcp6 0 0 :::8082 :::* LISTEN 1001 17506 1280/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 12109 925/io.admin.0 udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 12281 1179/io.broadlink2. udp 0 0 0.0.0.0:60346 0.0.0.0:* 1001 17419 1179/io.broadlink2. udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14850 721/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 10997 340/avahi-daemon: r udp 0 0 0.0.0.0:33312 0.0.0.0:* 108 10999 340/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 15320 1108/io.shelly.0 udp6 0 0 :::5353 :::* 108 10998 340/avahi-daemon: r udp6 0 0 :::41421 :::* 108 11000 340/avahi-daemon: r udp6 0 0 :::546 :::* 0 14861 721/dhcpcd *** Log File - Last 25 Lines *** 2023-05-15 21:35:48.759 - info: alexa2.0 (1004) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-05-15 21:35:49.649 - info: host.raspberrypi instance system.adapter.tankerkoenig.0 started with pid 1224 2023-05-15 21:35:49.753 - info: alexa2.0 (1004) Initialization Done ... 2023-05-15 21:35:49.939 - info: iot.0 (1194) Connection changed: connect 2023-05-15 21:35:50.158 - info: simple-api.0 (1205) starting. Version 2.7.2 in /opt/iobroker/node_modules/iobroker.simple-api, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:35:50.211 - info: simple-api.0 (1205) simpleAPI server listening on port 8087 2023-05-15 21:35:50.215 - info: simple-api.0 (1205) Allow states only when user is owner: false 2023-05-15 21:35:50.245 - info: simple-api.0 (1205) http server listening on port 8087 2023-05-15 21:35:51.653 - info: broadlink2.0 (1179) Poll every 30 secods. 2023-05-15 21:35:51.654 - info: broadlink2.0 (1179) broadlink2.0 started and found 0 devices named 2023-05-15 21:35:51.655 - info: broadlink2.0 (1179) found macs: 2023-05-15 21:35:52.582 - info: tankerkoenig.0 (1224) starting. Version 3.3.7 in /opt/iobroker/node_modules/iobroker.tankerkoenig, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:35:52.636 - info: tankerkoenig.0 (1224) Adapter is already in daemon mode 2023-05-15 21:35:52.637 - info: tankerkoenig.0 (1224) Sync time set to 10 minutes or 600000 ms 2023-05-15 21:35:52.972 - info: host.raspberrypi instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-05-15 21:35:53.173 - info: host.raspberrypi instance system.adapter.text2command.0 started with pid 1254 2023-05-15 21:35:56.457 - info: text2command.0 (1254) starting. Version 2.3.0 in /opt/iobroker/node_modules/iobroker.text2command, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:36:02.189 - info: tankerkoenig.0 (1224) Start first request 2023-05-15 21:36:02.935 - info: host.raspberrypi instance system.adapter.web.0 started with pid 1280 2023-05-15 21:36:05.930 - info: web.0 (1280) starting. Version 5.3.1 in /opt/iobroker/node_modules/iobroker.web, node: v18.16.0, js-controller: 4.0.24 2023-05-15 21:36:06.279 - info: web.0 (1280) socket.io server listening on port 8082 2023-05-15 21:36:06.287 - info: web.0 (1280) simpleAPI server listening on port 8082 2023-05-15 21:36:06.288 - info: web.0 (1280) Allow states only when user is owner: false 2023-05-15 21:36:06.310 - info: web.0 (1280) http server listening on port 8082 2023-05-15 21:45:00.027 - info: javascript.0 (963) script.js.downloads.Shelly-Verbrauch: Shelly Verbrauch: Verbrauchswerte aktualisiert: 4 | Reboots korrigiert: 0 | Unveränderte Werte: 8 `top - 21:44:36 up 10 min, 1 user, load average: 0,12, 0,32, 0,28 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie %CPU(s): 1,6 us, 0,5 sy, 0,0 ni, 97,8 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Spch: 1849,2 total, 531,1 free, 1059,5 used, 258,6 buff/cache MiB Swap: 100,0 total, 100,0 free, 0,0 used. 722,8 avail Spchso muss es sein
wobei 1GB wirklich gebrauchtes RAM mir schon etwas hoch vorkommt -
top - 21:44:36 up 10 min, 1 user, load average: 0,12, 0,32, 0,28 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie %CPU(s): 1,6 us, 0,5 sy, 0,0 ni, 97,8 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Spch: 1849,2 total, 531,1 free, 1059,5 used, 258,6 buff/cache MiB Swap: 100,0 total, 100,0 free, 0,0 used. 722,8 avail Spchso muss es sein
wobei 1GB wirklich gebrauchtes RAM mir schon etwas hoch vorkommt -
@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@Glasfaser
Heisst also eine 64GB SD Karte und den ganzen Spass von vorne, oder...??Nein ...
Dein Arbeitsspeicher mit 1,8G geht dir aus ..Den Fehler dazu müssen wir erst einkreisen .
Deshalb :
@glasfaser sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Ich "vermute" ein javascript Programm läuft bei dir Amok ,sehe wir später mal nach .
@glasfaser
Ich komme ja im Moment nicht auf den Raspi. -
@homoran
Das heisst was?Er lüppt erstmal gut
PID USER PR NI VIRT RES SHR S %CPU %MEM ZEIT+ BEFEHL 467 iobroker 20 0 1053068 225968 40892 S 4,3 11,9 1:45.01 iobroker.js-con 963 iobroker 20 0 886304 166152 41228 S 1,3 8,8 0:41.46 io.javascript.0beobachte mit
topio.javascript.0
wann er den MEM überflutet .
Was hast du alles an Scripte / Blockly
-
@glasfaser
Ich komme ja im Moment nicht auf den Raspi.@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Ich komme ja im Moment nicht auf den Raspi.
Du hast doch gerade alle Werte uns hier geliefert !?
Synology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
@glasfaser
Ich komme ja im Moment nicht auf den Raspi.@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@glasfaser
Ich komme ja im Moment nicht auf den Raspi.warum nicht?
wie versuchst du es? -
Er lüppt erstmal gut
PID USER PR NI VIRT RES SHR S %CPU %MEM ZEIT+ BEFEHL 467 iobroker 20 0 1053068 225968 40892 S 4,3 11,9 1:45.01 iobroker.js-con 963 iobroker 20 0 886304 166152 41228 S 1,3 8,8 0:41.46 io.javascript.0beobachte mit
topio.javascript.0
wann er den MEM überflutet .
Was hast du alles an Scripte / Blockly
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann! -
@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
Ich komme ja im Moment nicht auf den Raspi.
Du hast doch gerade alle Werte uns hier geliefert !?
@glasfaser aber anscheinend nicht auf den admin via Browser
-
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!der läuft
-
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!Kommst du mit dem Browser nicht auf den Admin !?
Sollte laut Log funktionieren !
-
@glasfaser
Kann ich euch nicht sagen, weil ich nicht den ioBroker starten kann!
294
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge