Smartmeter Elster AS1440

Homoran

@petlaw sagte in Smartmeter Elster AS1440:

Ist aber das, was die repositories aktuell zurückliefern wenn ich mit apt-get install installiere.

dann sind es die falschen Repos.

@petlaw sagte in Smartmeter Elster AS1440:

nach einem Upgrade von node und npm

20 ist zu hoch! wird noch nicht von ioBroker unterstützt.
Wird aber nicht unbedingt dein Problem sein, wenn

@petlaw sagte in Smartmeter Elster AS1440:

/dev/serial/by-id

nicht funktionieren sollte.

Wenn man alle serverseitigen Ursachen ausschließen kann, brauchen wir deine Konfiguration

petlaw

smartmeter.0.png

/dev/serial/by-id funktioniert mittlerweile:

root@SMARTY:/dev/serial# ls -al
total 0
drwxr-xr-x  4 root root   80 May 11 02:52 .
drwxr-xr-x 20 root root 3360 May 11 02:52 ..
drwxr-xr-x  2 root root   60 May 11 02:52 by-id
drwxr-xr-x  2 root root   60 May 11 02:52 by-path
root@SMARTY:/dev/serial# ls -al by-id
total 0
drwxr-xr-x 2 root root 60 May 11 02:52 .
drwxr-xr-x 4 root root 80 May 11 02:52 ..
lrwxrwxrwx 1 root root 13 May 11 02:52 usb-Silicon_Labs_CP2104_USB_to_UART_Bridge_Controller_00799EEF-if00-port0 -> ../../ttyUSB0
root@SMARTY:/dev/serial# ls -al /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 May 11 03:01 /dev/ttyUSB0
root@SMARTY:/dev/serial# groups
root
root@SMARTY:/dev/serial# groups iobroker
iobroker : iobroker tty dialout audio video bluetooth

node habe ich mit https://forum.iobroker.net/topic/64032/update-nodejs-best-practise-supported-16-und-18 auf Version 18 neu installiert.

Der Fehler bleibt.

Thomas Braun

@petlaw sagte in Smartmeter Elster AS1440:

Der Fehler bleibt.

Grundfehler: Du bist als root unterwegs.

Homoran

@petlaw sagte in Smartmeter Elster AS1440:

groups iobroker

kein sudo?

Thomas Braun

@homoran

Nein, der user 'iobroker' ist nicht in der Gruppe 'sudo' enthalten. Das ist auch korrekt so.

Homoran

@thomas-braun sorry!
klar. :face_palm:
der nicht-root muss in sudo und iobroker sein

petlaw

@homoran said in Smartmeter Elster AS1440:

@petlaw sagte in Smartmeter Elster AS1440:

groups iobroker

kein sudo?

Sollte er die haben ? Wurde bei der installation nicht vergeben.

peter@SMARTY:~$ sudo usermod -aG sudo iobroker
[sudo] password for peter:
peter@SMARTY:~$ sudo groups iobroker
iobroker : iobroker tty dialout sudo audio video bluetooth
peter@SMARTY:~$ sudo iobroker restart

2023-05-11 11:30:38.783 - debug: smartmeter.0 (8047) CREATE SERIALPORT: 300 7 1 even
2023-05-11 11:30:38.785 - debug: smartmeter.0 (8047) SERIALPORT OPEN
2023-05-11 11:30:38.787 - debug: smartmeter.0 (8047) SET MESSAGE TIMEOUT TIMER: 30000
2023-05-11 11:31:08.788 - debug: smartmeter.0 (8047) MESSAGE TIMEOUT TRIGGERED
2023-05-11 11:31:08.789 - debug: smartmeter.0 (8047) Error: No or too long answer from Serial Device after last request.
2023-05-11 11:31:08.789 - warn: smartmeter.0 (8047) No or too long answer from Serial Device after last request.
2023-05-11 11:31:08.789 - debug: smartmeter.0 (8047) Error: No or too long answer from Serial Device after last request.
2023-05-11 11:31:08.790 - debug: smartmeter.0 (8047) Transport Reset!! Restart = true
2023-05-11 11:31:08.792 - debug: smartmeter.0 (8047) SERIALPORT CLOSE
2023-05-11 11:31:08.793 - debug: smartmeter.0 (8047) SCHEDULE NEXT RUN IN 30s

petlaw

Es sieht halt absolut nicht danach aus, als würde er die serielle Schnittstelle wirklich aufmachen und da etwas senden.
Zu keinem Zeitpunkt blinkt da am Lesekopf irgendwas.

Gibts evt. irgendeine andere Möglichkeit, das zu checken ? Ich hätte mir da vom DEBUG mehr Information erwartet.
Auch wenn man auf SILLY stellt kommt nichts erhellendes dabei raus.

Thomas Braun

@petlaw sagte in Smartmeter Elster AS1440:

Sollte er die haben ? Wurde bei der installation nicht vergeben.

Nein, sollte er nicht.
Mach das wieder rückgängig.

petlaw

@thomas-braun said in Smartmeter Elster AS1440:

@petlaw sagte in Smartmeter Elster AS1440:

Sollte er die haben ? Wurde bei der installation nicht vergeben.

Nein, sollte er nicht.
Mach das wieder rückgängig.

Ist raus

peter@SMARTY:~$ sudo gpasswd -d iobroker sudo
Removing user iobroker from group sudo
peter@SMARTY:~$ sudo iobroker restart

Thomas Braun

@petlaw sagte in Smartmeter Elster AS1440:

sudo iobroker restart

Und pack niemals das Kommando 'iobroker' zusammen mit 'sudo' an.

iob stop
iob fix
iob start
iob diag

Ausgaben von iob diag bitte posten.

petlaw

@thomas-braun said in Smartmeter Elster AS1440:

@petlaw sagte in Smartmeter Elster AS1440:

sudo iobroker restart

Und pack niemals das Kommando 'iobroker' zusammen mit 'sudo' an.

Sir, jawohl, Sir ;-)

iob stop
iob fix
iob start
iob diag
Ausgaben von iob diag bitte posten.

======================= SUMMARY =======================
                     v.2023-04-16


Operatingsystem:        Debian GNU/Linux 11 (bullseye)
Kernel:                 5.10.0-22-amd64
Installation:           Native
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               true
Boot Target:            graphical.target

Pending OS-Updates:     2
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v18.16.0
                        /usr/bin/node           v18.16.0
                        /usr/bin/npm            9.5.1
                        /usr/bin/npx            9.5.1

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            7.8G        1.2G        5.3G        8.0M        1.3G        6.4G
Swap:           975M          0B        975M
Total:          8.8G        1.2G        6.3G

Active iob-Instances:   11
Active repo(s): stable

ioBroker Core:          js-controller           4.0.24
                        admin                   6.3.5

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : SMARTY                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : SMARTY                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                481
States:                 378

Size of iob-Database:

3.8M    /opt/iobroker/iobroker-data/objects.jsonl
172K    /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

Details:

======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Architecture    : x86_64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 11:50:00 up  8:57,  2 users,  load average: 0.04, 0.09, 0.05
CPU threads: 4


*** Time and Time Zones ***
               Local time: Thu 2023-05-11 11:50:00 CEST
           Universal time: Thu 2023-05-11 09:50:00 UTC
                 RTC time: Thu 2023-05-11 09:50:00
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
peter
/home/peter
peter cdrom floppy sudo audio dip video plugdev netdev bluetooth lpadmin scanner iobroker

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        1.2G        5.3G        8.0M        1.3G        6.4G
Swap:           975M          0B        975M
Total:          8.8G        1.2G        6.3G

         7828 M total memory
         1170 M used memory
          581 M active memory
         1605 M inactive memory
         5318 M free memory
          164 M buffer memory
         1175 M swap cache
          975 M total swap
            0 M used swap
          975 M free swap

*** FILESYSTEM ***
Filesystem                  Type      Size  Used Avail Use% Mounted on
udev                        devtmpfs  3.8G     0  3.8G   0% /dev
tmpfs                       tmpfs     783M  1.5M  782M   1% /run
/dev/mapper/SMARTY--vg-root ext4       23G  5.2G   17G  24% /
tmpfs                       tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs                       tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda2                   ext2      471M   63M  384M  15% /boot
/dev/mapper/SMARTY--vg-tmp  ext4      1.8G  100K  1.7G   1% /tmp
/dev/mapper/SMARTY--vg-var  ext4      9.1G  752M  7.9G   9% /var
/dev/mapper/SMARTY--vg-home ext4      198G  411M  188G   1% /home
/dev/sda1                   vfat      511M  5.8M  506M   2% /boot/efi
tmpfs                       tmpfs     783M   64K  783M   1% /run/user/116
tmpfs                       tmpfs     783M   56K  783M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu May 11 02:52:34 2023] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Thu May 11 02:52:34 2023] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[Thu May 11 02:52:35 2023] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[Thu May 11 02:52:35 2023] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[Thu May 11 02:52:35 2023] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[Thu May 11 02:52:35 2023] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[Thu May 11 02:52:35 2023] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)

Show mounted filesystems (real ones only):
TARGET        SOURCE                      FSTYPE OPTIONS
/             /dev/mapper/SMARTY--vg-root ext4   rw,relatime,errors=remount-ro
|-/boot       /dev/sda2                   ext2   rw,relatime
| `-/boot/efi /dev/sda1                   vfat   rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro
|-/tmp        /dev/mapper/SMARTY--vg-tmp  ext4   rw,relatime
|-/var        /dev/mapper/SMARTY--vg-var  ext4   rw,relatime
`-/home       /dev/mapper/SMARTY--vg-home ext4   rw,relatime

Files in neuralgic directories:

/var:
752M    /var/
390M    /var/cache
359M    /var/cache/apt
289M    /var/cache/apt/archives
281M    /var/lib

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 16.0M in the file system.

/opt/iobroker/backups:
2.4M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
136M    /opt/iobroker/iobroker-data/
126M    /opt/iobroker/iobroker-data/files
51M     /opt/iobroker/iobroker-data/files/javascript.admin
32M     /opt/iobroker/iobroker-data/files/javascript.admin/static/js
32M     /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
9.1M    /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map
8.9M    /opt/iobroker/iobroker-data/files/echarts/static/js/2.3d2d025f.chunk.js.map
8.9M    /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/2.3d2d025f.chunk.js.map
6.9M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c9.chunk.js.map
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : SMARTY                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : SMARTY                                   -  enabled
+ system.adapter.discovery.0              : discovery             : SMARTY                                   -  enabled
+ system.adapter.echarts.0                : echarts               : SMARTY                                   -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : SMARTY                                   -  enabled
+ system.adapter.influxdb.0               : influxdb              : SMARTY                                   -  enabled, port: 8086
+ system.adapter.jarvis.0                 : jarvis                : SMARTY                                   -  enabled
+ system.adapter.javascript.0             : javascript            : SMARTY                                   -  enabled
  system.adapter.net-tools.0              : net-tools             : SMARTY                                   - disabled
  system.adapter.ping.0                   : ping                  : SMARTY                                   - disabled
+ system.adapter.smartmeter.0             : smartmeter            : SMARTY                                   -  enabled
+ system.adapter.web.0                    : web                   : SMARTY                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : SMARTY                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : SMARTY                                   -  enabled, port: 8086
+ system.adapter.web.0                    : web                   : SMARTY                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.0.12   , installed 1.0.12
Adapter    "fritzdect"    : 2.2.6    , installed 2.2.6
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "jarvis"       : 3.1.2    , installed 3.1.2
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        481
States:         378

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://security.debian.org/debian-security bullseye-security InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://deb.debian.org/debian bullseye-backports InRelease
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:6 https://dl.yarnpkg.com/debian stable InRelease
Hit:7 https://repos.influxdata.com/debian stable InRelease
Hit:8 https://repos.influxdata.com/debian bullseye InRelease
Reading package lists...
Pending Updates: 2

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          15379      601/sshd: /usr/sbin
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          15394      572/cupsd
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       102655     10102/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       102648     10102/iobroker.js-c
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1001       103578     10427/io.jarvis.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       103439     10247/io.web.0
tcp6       0      0 :::8086                 :::*                    LISTEN      998        18537      525/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          15381      601/sshd: /usr/sbin
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          15393      572/cupsd
tcp6       0      0 :::80                   :::*                    LISTEN      0          13077      635/apache2
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       101909     10120/io.admin.0
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          15581      616/cups-browsed
udp        0      0 0.0.0.0:58553           0.0.0.0:*                           110        1989       500/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           110        1987       500/avahi-daemon: r
udp6       0      0 :::39214                :::*                                110        1990       500/avahi-daemon: r
udp6       0      0 fe80::921b:eff:fe3f:546 :::*                                0          17949      503/NetworkManager
udp6       0      0 :::5353                 :::*                                110        1988       500/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-05-11 11:47:42.529  - debug: smartmeter.0 (10177) SERIALPORT CLOSE
2023-05-11 11:47:42.530  - debug: smartmeter.0 (10177) SCHEDULE NEXT RUN IN 30s
2023-05-11 11:48:12.531  - debug: smartmeter.0 (10177) CREATE SERIALPORT: 300 7 1 even
2023-05-11 11:48:12.534  - debug: smartmeter.0 (10177) SERIALPORT OPEN
2023-05-11 11:48:12.536  - debug: smartmeter.0 (10177) SET MESSAGE TIMEOUT TIMER: 30000
2023-05-11 11:48:42.537  - debug: smartmeter.0 (10177) MESSAGE TIMEOUT TRIGGERED
2023-05-11 11:48:42.538  - debug: smartmeter.0 (10177) Error: No or too long answer from Serial Device after last request.
2023-05-11 11:48:42.538  - warn: smartmeter.0 (10177) No or too long answer from Serial Device after last request.
2023-05-11 11:48:42.538  - debug: smartmeter.0 (10177) Error: No or too long answer from Serial Device after last request.
2023-05-11 11:48:42.539  - debug: smartmeter.0 (10177) Transport Reset!! Restart = true
2023-05-11 11:48:42.541  - debug: smartmeter.0 (10177) SERIALPORT CLOSE
2023-05-11 11:48:42.542  - debug: smartmeter.0 (10177) SCHEDULE NEXT RUN IN 30s
2023-05-11 11:49:12.543  - debug: smartmeter.0 (10177) CREATE SERIALPORT: 300 7 1 even
2023-05-11 11:49:12.545  - debug: smartmeter.0 (10177) SERIALPORT OPEN
2023-05-11 11:49:12.547  - debug: smartmeter.0 (10177) SET MESSAGE TIMEOUT TIMER: 30000
2023-05-11 11:49:42.547  - debug: smartmeter.0 (10177) MESSAGE TIMEOUT TRIGGERED
2023-05-11 11:49:42.548  - debug: smartmeter.0 (10177) Error: No or too long answer from Serial Device after last request.
2023-05-11 11:49:42.548  - warn: smartmeter.0 (10177) No or too long answer from Serial Device after last request.
2023-05-11 11:49:42.549  - debug: smartmeter.0 (10177) Error: No or too long answer from Serial Device after last request.
2023-05-11 11:49:42.549  - debug: smartmeter.0 (10177) Transport Reset!! Restart = true
2023-05-11 11:49:42.551  - debug: smartmeter.0 (10177) SERIALPORT CLOSE
2023-05-11 11:49:42.552  - debug: smartmeter.0 (10177) SCHEDULE NEXT RUN IN 30s
2023-05-11 11:50:12.551  - debug: smartmeter.0 (10177) CREATE SERIALPORT: 300 7 1 even
2023-05-11 11:50:12.552  - debug: smartmeter.0 (10177) SERIALPORT OPEN
2023-05-11 11:50:12.553  - debug: smartmeter.0 (10177) SET MESSAGE TIMEOUT TIMER: 30000

============ Mark until here for C&P =============

Thomas Braun

@petlaw sagte in Smartmeter Elster AS1440:

Setz den user 'peter' in die Gruppe 'adm' rein, dann kann der auch logs lesen und du brauchst da keine root-Rechte.

Schalt den Desktop/X-Server aus.

Hit:7 https://repos.influxdata.com/debian stable InRelease

Da ist eine Doublette, vermutich hast du zwei .list-Files zu influx in /etc/apt/sources.list.d/ liegen. Lösche die mit dem Eintrag 'stable'.

Zu deinem eigentlichen Problem mit dem SerialPort fällt mir aber nix ein.

petlaw

@thomas-braun said in Smartmeter Elster AS1440:

@petlaw sagte in Smartmeter Elster AS1440:

Setz den user 'peter' in die Gruppe 'adm' rein, dann kann der auch logs lesen und du brauchst da keine root-Rechte.

Schalt den Desktop/X-Server aus.

Hit:7 https://repos.influxdata.com/debian stable InRelease

Da ist eine Doublette, vermutich hast du zwei .list-Files zu influx in /etc/apt/sources.list.d/ liegen. Lösche die mit dem Eintrag 'stable'.

Zu deinem eigentlichen Problem mit dem SerialPort fällt mir aber nix ein.

Erledigt.

Ich habe mal mit strace gecheckt, ob der Adapter überhaupt auf die Serielle Schnittstelle zugreift, da gibt es aber zu keinem Zeitpunkt einen open call auf /dev/ttyUSB0 oder irgendwas in /dev:

peter@SMARTY:~$ sudo ps -ef | grep smart
Debian-+    1012     892  0 02:52 tty1     00:00:00 /usr/libexec/gsd-smartcard
iobroker   10177   10102  0 11:46 ?        00:00:01 io.smartmeter.0
peter      13490    5853  0 11:56 pts/1    00:00:00 grep smart
peter@SMARTY:~$ sudo strace -p 10177
strace: Process 10177 attached
epoll_wait(14, [], 1024, 41)            = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 51)            = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 3)             = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 18)            = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1)             = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 195)           = 0
write(23, "*2\r\n$3\r\nget\r\n$36\r\nio.system.adap"..., 56) = 56
write(23, "*2\r\n$3\r\nget\r\n$40\r\nio.system.adap"..., 60) = 60
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
openat(AT_FDCWD, "/proc/self/stat", O_RDONLY) = 28
read(28, "10177 (io.smartmeter.0) R 10102 "..., 1023) = 309
close(28)                               = 0
write(23, "*2\r\n$3\r\nget\r\n$37\r\nio.system.adap"..., 57) = 57
write(23, "*2\r\n$3\r\nget\r\n$43\r\nio.system.adap"..., 63) = 63
write(23, "*2\r\n$3\r\nget\r\n$42\r\nio.system.adap"..., 62) = 62
write(23, "*2\r\n$3\r\nget\r\n$43\r\nio.system.adap"..., 63) = 63
write(23, "*2\r\n$3\r\nget\r\n$37\r\nio.system.adap"..., 57) = 57
write(23, "*2\r\n$3\r\nget\r\n$41\r\nio.system.adap"..., 61) = 61
write(23, "*2\r\n$3\r\nget\r\n$42\r\nio.system.adap"..., 62) = 62
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "$118\r\n{\"val\":true,\"ack\":true,\"ts"..., 65536) = 1029
write(23, "*4\r\n$5\r\nsetex\r\n$36\r\nio.system.ad"..., 178) = 178
write(23, "*4\r\n$5\r\nsetex\r\n$40\r\nio.system.ad"..., 182) = 182
write(23, "*3\r\n$3\r\nset\r\n$37\r\nio.system.adap"..., 169) = 169
write(23, "*3\r\n$3\r\nset\r\n$43\r\nio.system.adap"..., 176) = 176
write(23, "*3\r\n$3\r\nset\r\n$42\r\nio.system.adap"..., 175) = 175
write(23, "*3\r\n$3\r\nset\r\n$43\r\nio.system.adap"..., 172) = 172
write(23, "*3\r\n$3\r\nset\r\n$37\r\nio.system.adap"..., 168) = 168
write(23, "*3\r\n$3\r\nset\r\n$41\r\nio.system.adap"..., 170) = 170
write(23, "*3\r\n$3\r\nset\r\n$42\r\nio.system.adap"..., 172) = 172
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "+OK\r\n+OK\r\n+OK\r\n+OK\r\n", 65536) = 20
write(23, "*3\r\n$7\r\npublish\r\n$36\r\nio.system."..., 172) = 172
write(23, "*3\r\n$7\r\npublish\r\n$40\r\nio.system."..., 176) = 176
write(23, "*3\r\n$7\r\npublish\r\n$37\r\nio.system."..., 173) = 173
write(23, "*3\r\n$7\r\npublish\r\n$43\r\nio.system."..., 180) = 180
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "+OK\r\n+OK\r\n+OK\r\n+OK\r\n+OK\r\n", 65536) = 25
write(23, "*3\r\n$7\r\npublish\r\n$42\r\nio.system."..., 179) = 179
write(23, "*3\r\n$7\r\npublish\r\n$43\r\nio.system."..., 176) = 176
futex(0x6ca1124, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x6ca10d0, FUTEX_WAKE_PRIVATE, 1) = 1
write(23, "*3\r\n$7\r\npublish\r\n$37\r\nio.system."..., 172) = 172
write(23, "*3\r\n$7\r\npublish\r\n$41\r\nio.system."..., 174) = 174
write(23, "*3\r\n$7\r\npublish\r\n$42\r\nio.system."..., 176) = 176
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, ":0\r\n:0\r\n:0\r\n:0\r\n:0\r\n:0\r\n:0\r\n:0\r\n", 65536) = 32
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [{EPOLLIN, {u32=17, u64=17}}], 1024, 82) = 1
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
mprotect(0x7043000, 245760, PROT_READ|PROT_WRITE|PROT_EXEC) = 0
mprotect(0x7043000, 245760, PROT_READ|PROT_EXEC) = 0
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=17, u64=17}}], 1024, 0) = 1
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
write(23, "*2\r\n$3\r\nget\r\n$34\r\nio.system.adap"..., 54) = 54
write(23, "*2\r\n$3\r\nget\r\n$38\r\nio.system.adap"..., 58) = 58
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, ":0\r\n$104\r\n{\"val\":0.13,\"ack\":true"..., 65536) = 116
write(23, "*3\r\n$3\r\nset\r\n$34\r\nio.system.adap"..., 165) = 165
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, "$104\r\n{\"val\":1.79,\"ack\":true,\"ts"..., 65536) = 112
write(23, "*3\r\n$3\r\nset\r\n$38\r\nio.system.adap"..., 170) = 170
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, "+OK\r\n", 65536)              = 5
write(23, "*3\r\n$7\r\npublish\r\n$34\r\nio.system."..., 169) = 169
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, "+OK\r\n", 65536)              = 5
write(23, "*3\r\n$7\r\npublish\r\n$38\r\nio.system."..., 174) = 174
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, ":0\r\n", 65536)               = 4
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 72) = 1
read(23, ":0\r\n", 65536)               = 4
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 30)            = 0
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=17, u64=17}}], 1024, 0) = 1
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
write(23, "*3\r\n$7\r\npublish\r\n$26\r\nlog.system"..., 198) = 198
write(23, "*3\r\n$7\r\npublish\r\n$27\r\nlog.system"..., 199) = 199
epoll_wait(14, [{EPOLLIN, {u32=17, u64=17}}, {EPOLLIN, {u32=23, u64=23}}], 1024,                                                   0) = 2
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
epoll_ctl(14, EPOLL_CTL_ADD, 27, {EPOLLIN, {u32=4294967295, u64=4294967295}}) =                                                   0
epoll_ctl(14, EPOLL_CTL_DEL, 27, 0x7ffe9b261044) = 0
ioctl(27, FIONBIO, [1])                 = 0
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
read(23, ":1\r\n", 65536)               = 4
write(23, "*3\r\n$7\r\npublish\r\n$26\r\nlog.system"..., 182) = 182
write(23, "*3\r\n$7\r\npublish\r\n$27\r\nlog.system"..., 183) = 183
epoll_wait(14, [{EPOLLIN, {u32=17, u64=17}}, {EPOLLIN, {u32=23, u64=23}}], 1024,                                                   0) = 2
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
epoll_ctl(14, EPOLL_CTL_DEL, 27, 0x7ffe9b260dc4) = -1 ENOENT (No such file or di                                                  rectory)
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
read(23, ":1\r\n:1\r\n", 65536)         = 8
write(23, "*3\r\n$7\r\npublish\r\n$26\r\nlog.system"..., 199) = 199
write(23, "*3\r\n$7\r\npublish\r\n$27\r\nlog.system"..., 200) = 200
epoll_ctl(14, EPOLL_CTL_ADD, 27, {EPOLLIN, {u32=27, u64=27}}) = 0
epoll_wait(14, [{EPOLLIN, {u32=17, u64=17}}, {EPOLLIN, {u32=23, u64=23}}], 1024,                                                   0) = 2
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
read(23, ":1\r\n:1\r\n", 65536)         = 8
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 610) = 1
read(23, ":1\r\n", 65536)               = 4
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 568)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 249)           = 0
write(23, "*2\r\n$3\r\nget\r\n$36\r\nio.system.adap"..., 56) = 56
write(23, "*2\r\n$3\r\nget\r\n$40\r\nio.system.adap"..., 60) = 60
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
openat(AT_FDCWD, "/proc/self/stat", O_RDONLY) = 29
read(29, "10177 (io.smartmeter.0) R 10102 "..., 1023) = 309
close(29)                               = 0
write(23, "*2\r\n$3\r\nget\r\n$37\r\nio.system.adap"..., 57) = 57
write(23, "*2\r\n$3\r\nget\r\n$43\r\nio.system.adap"..., 63) = 63
write(23, "*2\r\n$3\r\nget\r\n$42\r\nio.system.adap"..., 62) = 62
write(23, "*2\r\n$3\r\nget\r\n$43\r\nio.system.adap"..., 63) = 63
write(23, "*2\r\n$3\r\nget\r\n$37\r\nio.system.adap"..., 57) = 57
write(23, "*2\r\n$3\r\nget\r\n$41\r\nio.system.adap"..., 61) = 61
write(23, "*2\r\n$3\r\nget\r\n$42\r\nio.system.adap"..., 62) = 62
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "$118\r\n{\"val\":true,\"ack\":true,\"ts"..., 65536) = 364
write(23, "*4\r\n$5\r\nsetex\r\n$36\r\nio.system.ad"..., 178) = 178
write(23, "*4\r\n$5\r\nsetex\r\n$40\r\nio.system.ad"..., 182) = 182
write(23, "*3\r\n$3\r\nset\r\n$37\r\nio.system.adap"..., 170) = 170
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "$105\r\n{\"val\":26.75,\"ack\":true,\"t"..., 65536) = 665
write(23, "*3\r\n$3\r\nset\r\n$43\r\nio.system.adap"..., 176) = 176
write(23, "*3\r\n$3\r\nset\r\n$42\r\nio.system.adap"..., 174) = 174
write(23, "*3\r\n$3\r\nset\r\n$43\r\nio.system.adap"..., 172) = 172
write(23, "*3\r\n$3\r\nset\r\n$37\r\nio.system.adap"..., 168) = 168
write(23, "*3\r\n$3\r\nset\r\n$41\r\nio.system.adap"..., 170) = 170
write(23, "*3\r\n$3\r\nset\r\n$42\r\nio.system.adap"..., 172) = 172
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "+OK\r\n+OK\r\n", 65536)       = 10
write(23, "*3\r\n$7\r\npublish\r\n$36\r\nio.system."..., 172) = 172
write(23, "*3\r\n$7\r\npublish\r\n$40\r\nio.system."..., 176) = 176
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "+OK\r\n", 65536)              = 5
write(23, "*3\r\n$7\r\npublish\r\n$37\r\nio.system."..., 174) = 174
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "+OK\r\n", 65536)              = 5
write(23, "*3\r\n$7\r\npublish\r\n$43\r\nio.system."..., 180) = 180
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "+OK\r\n", 65536)              = 5
write(23, "*3\r\n$7\r\npublish\r\n$42\r\nio.system."..., 178) = 178
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
write(23, "*2\r\n$3\r\nget\r\n$34\r\nio.system.adap"..., 54) = 54
write(23, "*2\r\n$3\r\nget\r\n$38\r\nio.system.adap"..., 58) = 58
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, "+OK\r\n+OK\r\n+OK\r\n+OK\r\n:0\r\n:0\r\n", 65536) = 28
write(23, "*3\r\n$7\r\npublish\r\n$43\r\nio.system."..., 176) = 176
write(23, "*3\r\n$7\r\npublish\r\n$37\r\nio.system."..., 172) = 172
write(23, "*3\r\n$7\r\npublish\r\n$41\r\nio.system."..., 174) = 174
write(23, "*3\r\n$7\r\npublish\r\n$42\r\nio.system."..., 176) = 176
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, ":0\r\n:0\r\n:0\r\n$103\r\n{\"val\":0.2,\"ac"..., 65536) = 247
write(23, "*3\r\n$3\r\nset\r\n$34\r\nio.system.adap"..., 165) = 165
write(23, "*3\r\n$3\r\nset\r\n$38\r\nio.system.adap"..., 170) = 170
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, ":0\r\n+OK\r\n", 65536)        = 9
write(23, "*3\r\n$7\r\npublish\r\n$34\r\nio.system."..., 169) = 169
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, "+OK\r\n", 65536)              = 5
write(23, "*3\r\n$7\r\npublish\r\n$38\r\nio.system."..., 174) = 174
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, ":0\r\n", 65536)               = 4
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 729) = 1
read(23, ":0\r\n", 65536)               = 4
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 687)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 226)           = 0
write(23, "*2\r\n$3\r\nget\r\n$36\r\nio.system.adap"..., 56) = 56
write(23, "*2\r\n$3\r\nget\r\n$40\r\nio.system.adap"..., 60) = 60
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
openat(AT_FDCWD, "/proc/self/stat", O_RDONLY) = 29
read(29, "10177 (io.smartmeter.0) R 10102 "..., 1023) = 309
close(29)                               = 0
write(23, "*2\r\n$3\r\nget\r\n$37\r\nio.system.adap"..., 57) = 57
write(23, "*2\r\n$3\r\nget\r\n$43\r\nio.system.adap"..., 63) = 63
write(23, "*2\r\n$3\r\nget\r\n$42\r\nio.system.adap"..., 62) = 62
write(23, "*2\r\n$3\r\nget\r\n$43\r\nio.system.adap"..., 63) = 63
write(23, "*2\r\n$3\r\nget\r\n$37\r\nio.system.adap"..., 57) = 57
write(23, "*2\r\n$3\r\nget\r\n$41\r\nio.system.adap"..., 61) = 61
write(23, "*2\r\n$3\r\nget\r\n$42\r\nio.system.adap"..., 62) = 62
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "$118\r\n{\"val\":true,\"ack\":true,\"ts"..., 65536) = 919
mprotect(0xac90e6c0000, 262144, PROT_READ|PROT_WRITE) = 0
mprotect(0x17dcb7700000, 262144, PROT_READ|PROT_WRITE) = 0
mprotect(0x3913740000, 262144, PROT_READ|PROT_WRITE) = 0
mprotect(0x4481bb00000, 262144, PROT_READ|PROT_WRITE) = 0
futex(0x6ca1124, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x6ca10d0, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x6ca1124, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x6ca10d0, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x6c60e80, FUTEX_WAIT_PRIVATE, 0, NULL) = -1 EAGAIN (Resource temporarily                                                   unavailable)
futex(0x6c60e08, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x6ca1124, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x6ca10d0, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x6ca1120, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x6ca10d0, FUTEX_WAKE_PRIVATE, 1) = 1
getpid()                                = 10177
write(23, "*4\r\n$5\r\nsetex\r\n$36\r\nio.system.ad"..., 178) = 178
write(23, "*4\r\n$5\r\nsetex\r\n$40\r\nio.system.ad"..., 182) = 182
write(23, "*3\r\n$3\r\nset\r\n$37\r\nio.system.adap"..., 169) = 169
write(23, "*3\r\n$3\r\nset\r\n$43\r\nio.system.adap"..., 176) = 176
write(23, "*3\r\n$3\r\nset\r\n$42\r\nio.system.adap"..., 175) = 175
write(23, "*3\r\n$3\r\nset\r\n$43\r\nio.system.adap"..., 172) = 172
write(23, "*3\r\n$3\r\nset\r\n$37\r\nio.system.adap"..., 168) = 168
write(23, "*3\r\n$3\r\nset\r\n$41\r\nio.system.adap"..., 170) = 170
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "$102\r\n{\"val\":11,\"ack\":true,\"ts\":"..., 65536) = 125
write(23, "*3\r\n$3\r\nset\r\n$42\r\nio.system.adap"..., 172) = 172
write(23, "*3\r\n$7\r\npublish\r\n$36\r\nio.system."..., 172) = 172
write(23, "*3\r\n$7\r\npublish\r\n$40\r\nio.system."..., 176) = 176
write(23, "*3\r\n$7\r\npublish\r\n$37\r\nio.system."..., 173) = 173
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "+OK\r\n+OK\r\n+OK\r\n", 65536) = 15
write(23, "*3\r\n$7\r\npublish\r\n$43\r\nio.system."..., 180) = 180
write(23, "*3\r\n$7\r\npublish\r\n$42\r\nio.system."..., 179) = 179
write(23, "*3\r\n$7\r\npublish\r\n$43\r\nio.system."..., 176) = 176
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, "+OK\r\n+OK\r\n+OK\r\n", 65536) = 15
write(23, "*3\r\n$7\r\npublish\r\n$37\r\nio.system."..., 172) = 172
write(23, "*3\r\n$7\r\npublish\r\n$41\r\nio.system."..., 174) = 174
write(23, "*3\r\n$7\r\npublish\r\n$42\r\nio.system."..., 176) = 176
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}, {EPOLLIN, {u32=17, u64=17}}], 1024,                                                   0) = 2
read(23, ":0\r\n:0\r\n:0\r\n:0\r\n:0\r\n:0\r\n:0\r\n:0\r\n", 65536) = 32
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_wait(14, [{EPOLLIN, {u32=17, u64=17}}], 1024, 0) = 1
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
write(23, "*2\r\n$3\r\nget\r\n$34\r\nio.system.adap"..., 54) = 54
write(23, "*2\r\n$3\r\nget\r\n$38\r\nio.system.adap"..., 58) = 58
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, ":0\r\n$103\r\n{\"val\":0.2,\"ack\":true,"..., 65536) = 115
write(23, "*3\r\n$3\r\nset\r\n$34\r\nio.system.adap"..., 165) = 165
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, "$104\r\n{\"val\":1.85,\"ack\":true,\"ts"..., 65536) = 112
write(23, "*3\r\n$3\r\nset\r\n$38\r\nio.system.adap"..., 170) = 170
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, "+OK\r\n", 65536)              = 5
write(23, "*3\r\n$7\r\npublish\r\n$34\r\nio.system."..., 169) = 169
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, "+OK\r\n", 65536)              = 5
write(23, "*3\r\n$7\r\npublish\r\n$38\r\nio.system."..., 174) = 174
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 0) = 1
read(23, ":0\r\n", 65536)               = 4
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 90) = 1
read(23, ":0\r\n", 65536)               = 4
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 47)            = 0
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
epoll_ctl(14, EPOLL_CTL_DEL, 27, 0x7ffe9b264604) = 0
futex(0x52740a8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
mprotect(0x7043000, 245760, PROT_READ|PROT_WRITE|PROT_EXEC) = 0
mprotect(0x7043000, 245760, PROT_READ|PROT_EXEC) = 0
epoll_wait(14, [{EPOLLIN, {u32=17, u64=17}}], 1024, 0) = 1
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
write(23, "*3\r\n$7\r\npublish\r\n$26\r\nlog.system"..., 192) = 192
write(23, "*3\r\n$7\r\npublish\r\n$27\r\nlog.system"..., 193) = 193
write(23, "*3\r\n$7\r\npublish\r\n$26\r\nlog.system"..., 234) = 234
write(23, "*3\r\n$7\r\npublish\r\n$27\r\nlog.system"..., 235) = 235
write(23, "*3\r\n$7\r\npublish\r\n$26\r\nlog.system"..., 226) = 226
write(23, "*3\r\n$7\r\npublish\r\n$27\r\nlog.system"..., 227) = 227
write(23, "*3\r\n$7\r\npublish\r\n$26\r\nlog.system"..., 234) = 234
write(23, "*3\r\n$7\r\npublish\r\n$27\r\nlog.system"..., 235) = 235
write(23, "*3\r\n$7\r\npublish\r\n$26\r\nlog.system"..., 199) = 199
write(23, "*3\r\n$7\r\npublish\r\n$27\r\nlog.system"..., 200) = 200
write(23, "*3\r\n$7\r\npublish\r\n$26\r\nlog.system"..., 183) = 183
write(23, "*3\r\n$7\r\npublish\r\n$27\r\nlog.system"..., 184) = 184
write(23, "*3\r\n$7\r\npublish\r\n$26\r\nlog.system"..., 191) = 191
write(23, "*3\r\n$7\r\npublish\r\n$27\r\nlog.system"..., 192) = 192
epoll_wait(14, [{EPOLLIN, {u32=17, u64=17}}, {EPOLLIN, {u32=23, u64=23}}], 1024,                                                   0) = 2
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
futex(0x52740ac, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x5274040, FUTEX_WAKE_PRIVATE, 1) = 1
read(23, ":1\r\n:1\r\n:1\r\n:1\r\n:1\r\n:1\r\n:1\r\n:1\r\n"..., 65536) = 52
epoll_wait(14, [{EPOLLIN, {u32=17, u64=17}}], 1024, 0) = 1
read(17, "\1\0\0\0\0\0\0\0", 1024)      = 8
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [{EPOLLIN, {u32=23, u64=23}}], 1024, 642) = 1
read(23, ":1\r\n", 65536)               = 4
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 599)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 999)           = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, [], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0
epoll_wait(14, ^C[], 1024, 1000)          = 0
epoll_wait(14, [], 1024, 0)             = 0

Im gegensatz zu socat:

stat("/dev/ttyUSB0", {st_mode=S_IFCHR|0777, st_rdev=makedev(0xbc, 0), ...}) = 0
openat(AT_FDCWD, "/dev/ttyUSB0", O_RDWR|O_APPEND) = 5

Homoran

@petlaw sagte in Smartmeter Elster AS1440:

Im gegensatz zu socat:

dann hat socat die noch nicht freigegeben

oder die Konfiguration im Adapter passt nicht

petlaw

@homoran said in Smartmeter Elster AS1440:

@petlaw sagte in Smartmeter Elster AS1440:

Im gegensatz zu socat:

dann hat socat die noch nicht freigegeben

oder die Konfiguration im Adapter passt nicht

Der Adapter versucht es ja noch nicht einmal.

Es gibt keinen system call open auf irgendwas unterhalb von /dev, weder ttyUSB0 noch den unter /dev/serial/by-id

Wenn da was schief wäre müsste er ja wenigstens einen Versuch (mit einem falschen Device namen oä) machen, oder ?

Homoran

@petlaw sagte in Smartmeter Elster AS1440:

Der Adapter versucht es ja noch nicht einmal.

doch

@petlaw sagte in Smartmeter Elster AS1440:

2023-05-11 11:30:38.783 - debug: smartmeter.0 (8047) CREATE SERIALPORT: 300 7 1 even

nur möglicherweise den falschen

petlaw

@homoran said in Smartmeter Elster AS1440:

@petlaw sagte in Smartmeter Elster AS1440:

Der Adapter versucht es ja noch nicht einmal.

doch

leider nicht.


peter@SMARTY:/dev$ sudo ps -ewwf | grep smart
[sudo] password for peter:
iobroker    1083     730  0 13:36 ?        00:00:01 io.smartmeter.0
peter       1258     886  0 13:43 pts/0    00:00:00 grep smart

peter@SMARTY:/dev$ sudo strace -o strace_smart.trc -p 1083
strace: Process 1083 attached
^Cstrace: Process 1083 detached

peter@SMARTY:/dev$ grep open strace_smart.trc
openat(AT_FDCWD, "/proc/self/stat", O_RDONLY) = 28
openat(AT_FDCWD, "/proc/self/stat", O_RDONLY) = 28
openat(AT_FDCWD, "/proc/self/stat", O_RDONLY) = 29
openat(AT_FDCWD, "/proc/self/stat", O_RDONLY) = 29
openat(AT_FDCWD, "/proc/self/stat", O_RDONLY) = 28
openat(AT_FDCWD, "/proc/self/stat", O_RDONLY) = 28
openat(AT_FDCWD, "/proc/self/stat", O_RDONLY) = 29

@petlaw sagte in Smartmeter Elster AS1440:

2023-05-11 11:30:38.783 - debug: smartmeter.0 (8047) CREATE SERIALPORT: 300 7 1 even

nur möglicherweise den falschen

Zu keinem Zeitpunkt wird ein system call "open" geloggt auf irgendein Device unterhalb von /dev. Auch nicht auf ein falsches.

petlaw

Also die Lösung war (rückblickend betrachtet) so einfach wie einleuchtend: Der Adapter muss auf bidirektionale Kommunikation gestellt werden, ansonsten schickt er dem Smartmeter nicht die Loginsequenz.

Die Standardeinstellung "nur lesen" taugt vermutlich nur für Smartmeter, die die Werte permanent von selbst über die Schnittstelle ausgeben.

Homoran

@petlaw sagte in Smartmeter Elster AS1440:

Die Standardeinstellung taugt vermutlich nur für Smartmeter, die die Werte permanent von selbst über die Schnittstelle ausgeben.

korrekt!
dafür gibt es die Einstellungen.

hätte man aber sehen können/ müssen.
readonly und Wakeup - signon - data passt nicht zusammen.

Community Forum

NEWS

Smartmeter Elster AS1440

Support us

430

32.4k

81.5k

1.3m