UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Thomas Braun]

@intruminator

Falscher Pfad. Siehe:

https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian/2

Und Buster ist tot, installier da das aktuelle Stable-Release 'Bullseye'.

[Intruminator]

@thomas-braun
alles klar. Habe es dank euch geschafft.

Vielen Dank und wundervolle Weihnachten.
Sven

[grazer75]

Hallo nach dem Update von 16 auf 18.16.0 gehen einige Adapter nicht mehr korrekt
zusätzlich kommt die Meldung öfters langsame Verbindung erkannt.

sudo nano /etc/apt/sources.list.d/nodesource.list

deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x bullseye main
deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x bullseye main

uname -m && test -f /opt/scripts/.docker_config/.thisisdocker && echo "Docker-Installation" || echo "Kein Docker" && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && echo $XDG_SESSION_TYPE && echo $DESKTOP_SESSION && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs

aarch64
Kein Docker
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
v18.16.0
v18.16.0
9.5.1
4.0.24
andreas
andreas adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker
tty

/opt/iobroker
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:3 https://packages.sury.org/php bullseye InRelease
Hit:4 http://deb.debian.org/debian bullseye InRelease
Hit:5 http://security.debian.org/debian-security bullseye-security InRelease
Hit:6 http://deb.debian.org/debian bullseye-updates InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Wenn ich einen Adapter mit

iobroker rebuild %adapter% --install

verwende, verliere ich auch die Einstellungen oder ist das nur eine Neuinstallation & Einstellungen bleiben?

Fehler der Adapter zB

xbox.0
2023-04-16 02:29:23.394	warn	Could not poll API: "No oauth token found. Run authentication flow first"
iot.0
2023-04-16 02:30:21.640	error	[GHOME] device netatmo-crawler.0.stationData.1.rain is unknown to google home
ble.0
2023-04-16 02:29:17.487	error	Terminating because A dependency requires a rebuild.

die Meldung von hmip ist nach dem Update auf 18.16.0 auch neu

[DJMarc75]

@grazer75 bitte alles in Codetags posten, auch die Logs... kann ja sonnst niemand gescheit lesen, analysieren und darauf antworten.

[apollon77]

@grazer75 Also in bin ehrlich, alle hier gezeigten Log Ausschnitte haben nichts mit der Node.-js Version zu tun.

1.) "Langsame Verbindung" - Wenn ich annehme was damit gemeint ist eil kein Log da - dann kann das beim ersten Start vorkommen wenn das System recht arg unter last ist. Wenn die Adapter danach laufen ist aber erstmal alles gut. Also mal CPU Nutzung beobachten
2.) xbox: Naja dann mach mal was da steht ..."No oauth token found. Run authentication flow first"
3.) Deprecated: ignorieren
4.) hmip ... Bittelesen und agieren, also falls es noch kein Github issue gibt bitte eins anlegen. Da gibts wohle in Gerät was der Adapter noch nicht kann. Das sollte auch vorher bei einem neustart gekommen sein.

[grazer75]

Ich bin jetzt wieder auf node 16.x zurück, läuft wieder alles, scheinbar ist 18.16.0 bei einigen Adapter noch nicht fit

hmip, xbox, tuya, zigbee, javascript hatte ich nur Probleme und errors :/

sudo apt-get purge nodejs -y && sudo apt-get autoremove -y && sudo apt-get autoclean -y
sudo curl -sL https://deb.nodesource.com/setup_16.x | sudo bash -
sudo apt-get install -y nodejs
gemacht und anschließend iob fix & reboot
node && which npm
v16.19.1
v16.19.1
8.19.3
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm

Läuft nun alles wieder normal, die npm könnte ich aktualisieren auf 9.5.1 oder besser auf 8.19.3 bleiben?

[Thomas Braun]

@grazer75 sagte in [How-to] Node.js für ioBroker richtig updaten:

tuya, zigbee, javascript

Die drei Adapter laufen hier einwandfrei mit nodejs>16

die npm könnte ich aktualisieren auf 9.5.1 oder besser auf 8.19.3 bleiben?

Finger weg von manuellen Updates von npm. Das kommt immer im Paket mit nodejs daher.

[apollon77]

@grazer75 kann nur zustimmen: Bei allen genannten sind KEINERLEI probleme mit Node.js 18 bekannt ... bzzwww..... welchen js-controller hast Du? Alles unter 4.0.24 kann ggf im Bereich Netzwerk probleme machen

[Segway]

@grazer75 sagte in [How-to] Node.js für ioBroker richtig updaten:

Ich bin jetzt wieder auf node 16.x zurück, läuft wieder alles, scheinbar ist 18.16.0 bei einigen Adapter noch nicht fit

Kann ich nicht bestätigen v18.15 läuft seit zig Monaten bei mir
knapp 40 Adapter laufen.

[grazer75]

anbei ein iob diag

Operatingsystem:        Debian GNU/Linux 11 (bullseye)
Kernel:                 6.1.21-v8+
Installation:           Native
Timezone:               Europe/Vienna (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v16.19.1
                        /usr/bin/node           v16.19.1
                        /usr/bin/npm            8.19.3
                        /usr/local/bin/npx              9.5.1

Recommended versions are nodejs 18.x.y and npm 9.x.y
*** nodejs is NOT correctly installed ***

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            7.8G        125M        6.6G        6.0M        1.1G        7.6G
Swap:            99M          0B         99M
Total:          7.9G        125M        6.7G

Active iob-Instances:   1
Active repo(s): stable

ioBroker Core:          js-controller           4.0.24
                        admin                   6.3.5

ioBroker Status:        iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
  system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                29769
States:                 25422

Size of iob-Database:

21M     /opt/iobroker/iobroker-data/objects.jsonl
7.3M    /opt/iobroker/iobroker-data/states.jsonl

"/usr/local/bin/npx 9.5.1" sieht komisch aus, war das nicht auch die npm version bei 18.16.0 ?

[Thomas Braun]

@grazer75 sagte in [How-to] Node.js für ioBroker richtig updaten:

*** nodejs is NOT correctly installed ***

npx ist im falschen Pfad.
Die nodejs 18, die damit kam hast du also nicht mit dem Paketmanager installiert sondern 'irgendwie anders'. Und dann funktioniert das auch nicht richtig, bekanntermaßen.

[grazer75]

@thomas-braun und wie würdest du vorschlagen das Problem zu bereinigen, ausgenommen alles neu zu installieren und backup restore.

Eventuell einfach

npm install -g npm@8

ausführen?

anbei auch ein Ergebnis von

apt-cache policy nodejs

nodejs:
  Installed: 16.19.1-deb-1nodesource1
  Candidate: 16.19.1-deb-1nodesource1
  Version table:
 *** 16.19.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

which nodejs node npm && nodejs -v && node -v && npm -v && apt policy nodejs

ergibt

/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
v16.19.1
v16.19.1
8.19.3
nodejs:
  Installed: 16.19.1-deb-1nodesource1
  Candidate: 16.19.1-deb-1nodesource1
  Version table:
 *** 16.19.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

sudo nano /etc/apt/sources.list.d/nodesource.list

deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_16.x bullseye main
deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_16.x bullseye main

Was ist der empfohlene Prozess um ein neuerliches Upgrade auf 18 zu probieren?

cd /opt/iobroker
iobroker stop
iobroker backup
sudo apt-get purge nodejs -y && sudo apt-get autoremove -y && sudo apt-get autoclean -y
sudo curl -sL https://deb.nodesource.com/setup_18.x | sudo bash -
sudo apt-get install -y nodejs
curl -sL https://iobroker.net/fix.sh | bash -
iobroker start

Habs so gemacht bei 18 und dann auch jetzt beim Downgrade auf 16.

//offtopic in welchem Intervall darf man eigentlich antworten, steht das irgendwo?
(wenn ich gleich antworten will kommt ein "Error Forbidden" und ich würde mir leichter tun wenn ich wüsste wann es wieder geht)

[Thomas Braun]

@grazer75 sagte in [How-to] Node.js für ioBroker richtig updaten:

Eventuell einfach
npm install -g npm@8

ausführen?

Genau mit dem Gefummel frickelst du es ja kaputt. npm/npx wird NIE separat angepackt, das liegt dem Paket 'nodejs' bereits in jeweils passender Version bei.

Räum das weg:

sudo rm /usr/local/bin/npx

Und dann bitte nochmal

iob diag

laufen lassen.

[Homoran]

@grazer75 sagte in [How-to] Node.js für ioBroker richtig updaten:

wenn ich gleich antworten will kommt ein "Error Forbidden" und ich würde mir leichter tun wenn ich wüsste wann es wieder geht)

hat nix mit "gleich" zu tun, eher mit Firefox.
F5 und nochmal. dann klappt es

[grazer75]

@thomas-braun
sieht gut aus

Operatingsystem:        Debian GNU/Linux 11 (bullseye)
Kernel:                 6.1.21-v8+
Installation:           Native
Timezone:               Europe/Vienna (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v16.19.1
                        /usr/bin/node           v16.19.1
                        /usr/bin/npm            8.19.3
                        /usr/bin/npx            8.19.3

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            7.8G        3.1G        3.9G        6.0M        848M        4.6G
Swap:            99M          0B         99M
Total:          7.9G        3.1G        4.0G

Active iob-Instances:   57
Active repo(s): stable

ioBroker Core:          js-controller           4.0.24
                        admin                   6.3.5

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                29909
States:                 24671

Size of iob-Database:

23M     /opt/iobroker/iobroker-data/objects.jsonl
58M     /opt/iobroker/iobroker-data/states.jsonl

auf 16 bleiben oder nochmal 18 testen?

Also

cd /opt/iobroker
iobroker stop
iobroker backup
sudo apt-get purge nodejs -y && sudo apt-get autoremove -y && sudo apt-get autoclean -y
sudo curl -sL https://deb.nodesource.com/setup_18.x | sudo bash -
sudo apt-get install -y nodejs
curl -sL https://iobroker.net/fix.sh | bash -
iobroker start

und wenn es wieder Fehler gibt retour auf 16

cd /opt/iobroker
iobroker stop
iobroker backup
sudo apt-get purge nodejs -y && sudo apt-get autoremove -y && sudo apt-get autoclean -y
sudo curl -sL https://deb.nodesource.com/setup_16.x | sudo bash -
sudo apt-get install -y nodejs
curl -sL https://iobroker.net/fix.sh | bash -
iobroker start

oder lieber so lassen wenn alles mit 16.x funktioniert aktuell.

[grazer75]

@homoran verwende Google Chrome, hab meistens gleich auf reply gedrückt und konnte es nie abschicken.
Scheinbar muss ich die Seite vorher aktualisieren, komischerweise nach paar Stunden ging das Submit dann.
Deshalb dachte ich das eine Einstellung vom Board war.

[Thomas Braun]

@grazer75

Warum so kompliziert?
Wenn die Infrastruktur sonst passt ändert man einfach in der Datei /etc/apt/sources.list.d/nodesource.list
Die entprechende Zeilen ab. Hier mal meine als Beispiel:

deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_16.x bookworm main
deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_16.x bookworm main
deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x bookworm main
deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x bookworm main
# deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_19.x bookworm main
# deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_19.x bookworm main
# deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_20.x bookworm main
# deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_20.x bookworm main

Wenn ich mal irgendwann auf nodejs20 gehe nehme ich das #-Kommentarzeichen raus und hol mir die Version dann wie üblich per Paketmanager rein.

[grazer75]

@thomas-braun said in [How-to] Node.js für ioBroker richtig updaten:

/etc/apt/sources.list.d/nodesource.list

deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_16.x bullseye main
deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_16.x bullseye main

steht bei mir drin.

Also meinst du das ich dann

deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_16.x bullseye main
deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_16.x bullseye main
deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x bullseye main
deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x bullseye main

dazu schreibe (oder 16 auskommentieren) und dann wie weiter vorgehen um auf 18 zu gehen?

Iob stop und dann?
Wie mache ich den richtigen Downgrade auf 16 falls einiges wieder nicht geht?

[Thomas Braun]

@grazer75 sagte in [How-to] Node.js für ioBroker richtig updaten:

Downgrade auf 16 falls einiges wieder nicht geht wie am besten?

So wie es im HowTo bereits drin steht (Zumindest in meinem...). Mit

sudo apt install nodejs=WUNSCHVERSION

Wenn du die 18er-Quelle dann aber nicht 'trocken' legst wird dir das allerdings dann nantürlich wieder als update serviert. (Man könnte das Paket auch 'pinnen', aber das führt etwas weit).

[grazer75]

@thomas-braun mit 18 wieder viele Meldungen

erstmal iob diag

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 20:41:31 up 2 min,  2 users,  load average: 3.46, 1.59, 0.61
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=54.0'C
volt=0.9460V

*** Time and Time Zones ***
               Local time: Sun 2023-04-16 20:41:32 CEST
           Universal time: Sun 2023-04-16 18:41:32 UTC
                 RTC time: n/a
                Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
andreas
/home/andreas
andreas adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        2.2G        5.2G        6.0M        409M        5.5G
Swap:            99M          0B         99M
Total:          7.9G        2.2G        5.3G

         7811 M total memory
         2207 M used memory
         2290 M active memory
          198 M inactive memory
         5194 M free memory
           51 M buffer memory
          357 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      118G  6.3G  107G   6% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  924K  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      253M   31M  222M  13% /boot
tmpfs          tmpfs     782M     0  782M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Apr 16 20:39:09 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:C5:38:E2 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=270f37e4-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sun Apr 16 20:39:11 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Sun Apr 16 20:39:11 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Sun Apr 16 20:39:12 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
2.2G    /var/
1.6G    /var/log
1.4G    /var/log/journal/deee1983c79b418b90418f11a8f1c85d
1.4G    /var/log/journal
317M    /var/cache

Archived and active journals take up 1.3G in the file system.

/opt/iobroker/backups:
395M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
452M    /opt/iobroker/iobroker-data/
333M    /opt/iobroker/iobroker-data/files
87M     /opt/iobroker/iobroker-data/backup-objects
72M     /opt/iobroker/iobroker-data/files/telegram.admin
52M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map
23M     /opt/iobroker/iobroker-data/objects.jsonl
19M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.904d455f.js.map
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map
15M     /opt/iobroker/iobroker-data/files/meteoalarm.admin/geocodes.json

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     16.19.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
/opt/iobroker/node_modules/standard-as-callback/built/index.js:6
        throw e;
        ^

Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket.<anonymous> (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:628:26)
    at Socket.emit (node:events:513:28)
    at TCP.<anonymous> (node:net:322:12)
Emitted 'error' event on ScanStream instance at:
    at /opt/iobroker/node_modules/ioredis/built/ScanStream.js:38:22
    at tryCatcher (/opt/iobroker/node_modules/standard-as-callback/built/utils.js:12:23)
    at /opt/iobroker/node_modules/standard-as-callback/built/index.js:33:51
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)

Node.js v18.16.0

/opt/iobroker/node_modules/standard-as-callback/built/index.js:6
        throw e;
        ^

Error: Connection is closed.
    at Redis.sendCommand (/opt/iobroker/node_modules/ioredis/built/redis/index.js:636:24)
    at Redis.scan (/opt/iobroker/node_modules/ioredis/built/commander.js:122:25)
    at ScanStream._read (/opt/iobroker/node_modules/ioredis/built/ScanStream.js:36:41)
    at Readable.read (node:internal/streams/readable:496:12)
    at resume_ (node:internal/streams/readable:999:12)
    at process.processTicksAndRejections (node:internal/process/task_queues:82:21)
Emitted 'error' event on ScanStream instance at:
    at /opt/iobroker/node_modules/ioredis/built/ScanStream.js:38:22
    at tryCatcher (/opt/iobroker/node_modules/standard-as-callback/built/utils.js:12:23)
    at /opt/iobroker/node_modules/standard-as-callback/built/index.js:33:51
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)

Node.js v18.16.0

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     7.0.3

Adapters from github:   4

Adapter State
  system.adapter.accuweather.0            : accuweather           : raspberrypi                              -  enabled
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.alarm.0                  : alarm                 : raspberrypi                              -  enabled
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.benchmark.0              : benchmark             : raspberrypi                              - disabled
+ system.adapter.bmw.0                    : bmw                   : raspberrypi                              -  enabled
  system.adapter.broadlink2.0             : broadlink2            : raspberrypi                              - disabled
  system.adapter.chromecast.0             : chromecast            : raspberrypi                              - disabled
  system.adapter.cloud.0                  : cloud                 : raspberrypi                              - disabled
+ system.adapter.coronavirus-statistics.0 : coronavirus-statistics: raspberrypi                              -  enabled
+ system.adapter.countdown.0              : countdown             : raspberrypi                              -  enabled
+ system.adapter.device-reminder.0        : device-reminder       : raspberrypi                              -  enabled
  system.adapter.devices.0                : devices               : raspberrypi                              - disabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.echarts.0                : echarts               : raspberrypi                              -  enabled
+ system.adapter.ecovacs-deebot.0         : ecovacs-deebot        : raspberrypi                              -  enabled
+ system.adapter.email.0                  : email                 : raspberrypi                              -  enabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : raspberrypi                              - disabled
  system.adapter.fb-checkpresence.1       : fb-checkpresence      : raspberrypi                              - disabled
+ system.adapter.firetv.0                 : firetv                : raspberrypi                              -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi                              - disabled
  system.adapter.followthesun.0           : followthesun          : raspberrypi                              -  enabled
  system.adapter.foobar2000.0             : foobar2000            : raspberrypi                              - disabled, port: 8888
+ system.adapter.fritzbox.0               : fritzbox              : raspberrypi                              -  enabled
  system.adapter.fritzdect.0              : fritzdect             : raspberrypi                              - disabled
+ system.adapter.fuelpricemonitor.0       : fuelpricemonitor      : raspberrypi                              -  enabled
  system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              - disabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
+ system.adapter.hmip.0                   : hmip                  : raspberrypi                              -  enabled
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
  system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
  system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
  system.adapter.jarvis.0                 : jarvis                : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
  system.adapter.lgtv11.0                 : lgtv11                : raspberrypi                              -  enabled, port: 8080
  system.adapter.life360.0                : life360               : raspberrypi                              - disabled
  system.adapter.linkeddevices.0          : linkeddevices         : raspberrypi                              -  enabled
  system.adapter.linux-control.0          : linux-control         : raspberrypi                              -  enabled
  system.adapter.logparser.0              : logparser             : raspberrypi                              -  enabled
+ system.adapter.luftdaten.0              : luftdaten             : raspberrypi                              -  enabled
  system.adapter.meteoalarm.0             : meteoalarm            : raspberrypi                              -  enabled
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : raspberrypi                              -  enabled, port: 54321
  system.adapter.mobile.0                 : mobile                : raspberrypi                              - disabled
  system.adapter.net-tools.0              : net-tools             : raspberrypi                              - disabled
+ system.adapter.netatmo-crawler.0        : netatmo-crawler       : raspberrypi                              -  enabled
  system.adapter.netatmo-energy.0         : netatmo-energy        : raspberrypi                              -  enabled
+ system.adapter.netatmo.0                : netatmo               : raspberrypi                              -  enabled
+ system.adapter.nuki-extended.0          : nuki-extended         : raspberrypi                              -  enabled
  system.adapter.nuki.0                   : nuki                  : raspberrypi                              -  enabled
  system.adapter.nut.0                    : nut                   : raspberrypi                              - disabled
  system.adapter.onvif.0                  : onvif                 : raspberrypi                              -  enabled
  system.adapter.openweathermap.0         : openweathermap        : raspberrypi                              -  enabled
+ system.adapter.owntracks.0              : owntracks             : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.parser.0                 : parser                : raspberrypi                              -  enabled
  system.adapter.paw.0                    : paw                   : raspberrypi                              - disabled, port: 8898
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.pushbullet.0             : pushbullet            : raspberrypi                              -  enabled
  system.adapter.radar2.0                 : radar2                : raspberrypi                              -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
  system.adapter.sayit.0                  : sayit                 : raspberrypi                              -  enabled
  system.adapter.shelly.0                 : shelly                : raspberrypi                              - disabled, port: 1882, bind: 0.0.0.0
  system.adapter.smartcontrol.0           : smartcontrol          : raspberrypi                              -  enabled
  system.adapter.snmp.0                   : snmp                  : raspberrypi                              -  enabled
  system.adapter.socketio.0               : socketio              : raspberrypi                              -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1884, bind: 192.168.1.139
  system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypi                              - disabled
+ system.adapter.spotify-premium.0        : spotify-premium       : raspberrypi                              -  enabled
  system.adapter.statistics.0             : statistics            : raspberrypi                              -  enabled
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
  system.adapter.tr-064.1                 : tr-064                : raspberrypi                              - disabled
  system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              - disabled
+ system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
  system.adapter.upnp.0                   : upnp                  : raspberrypi                              -  enabled
  system.adapter.virtualpowermeter.0      : virtualpowermeter     : raspberrypi                              -  enabled
  system.adapter.vis-history.0            : vis-history           : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
  system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : raspberrypi                              -  enabled
+ system.adapter.wifilight.0              : wifilight             : raspberrypi                              -  enabled
  system.adapter.windows-control.0        : windows-control       : raspberrypi                              -  enabled
  system.adapter.withings.0               : withings              : raspberrypi                              -  enabled
  system.adapter.xbox.0                   : xbox                  : raspberrypi                              -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.lgtv11.0                 : lgtv11                : raspberrypi                              -  enabled, port: 8080
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : raspberrypi                              -  enabled, port: 54321
+ system.adapter.owntracks.0              : owntracks             : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.socketio.0               : socketio              : raspberrypi                              -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1884, bind: 192.168.1.139
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyACM0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "accuweather"  : 1.2.1    , installed 1.2.1
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alarm"        : 3.3.9    , installed 3.3.9
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "backitup"     : 2.6.16   , installed 2.6.16
Adapter    "benchmark"    : 1.1.4    , installed 1.1.4
Adapter    "bmw"          : 2.5.7    , installed 2.5.7
Adapter    "broadlink2"   : 2.1.5    , installed 2.1.5
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "cloud"        : 4.3.0    , installed 4.3.0
Adapter    "coronavirus-statistics": 0.8.7, installed 0.8.7
Adapter    "countdown"    : 1.2.5    , installed 1.2.5
Adapter    "device-reminder": 1.2.9  , installed 1.2.9
Adapter    "devices"      : 1.1.2    , installed 1.1.2
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.0.12   , installed 1.0.12
Adapter    "ecovacs-deebot": 1.4.13  , installed 1.4.13
Adapter    "email"        : 1.1.4    , installed 1.1.4
Adapter    "fb-checkpresence": 1.1.26, installed 1.1.26
Adapter    "firetv"       : 1.0.0    , installed 1.0.0
Adapter    "flot"         : 1.11.0   , installed 1.11.0
Adapter    "followthesun" : 0.4.1    , installed 0.4.1
Adapter    "foobar2000"   : 2.0.4    , installed 2.0.4
Adapter    "fritzbox"     : 0.2.1    , installed 0.2.1
Adapter    "fritzdect"    : 2.2.6    , installed 2.2.6
Adapter    "fuelpricemonitor": 0.3.4 , installed 0.3.4
Adapter    "fullybrowser" : 2.1.2    , installed 2.1.2
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hmip"         : 1.20.0   , installed 1.20.0
Adapter    "ical"         : 1.13.2   , installed 1.13.2
Adapter    "info"         : 1.9.19   , installed 1.9.19
Adapter    "iot"          : 1.14.2   , installed 1.14.2
Adapter    "jarvis"       : 3.1.2    , installed 3.1.2
Adapter    "javascript"   : 6.1.4    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "lgtv11"       : 1.0.5    , installed 1.0.5
Adapter    "linkeddevices": 1.5.5    , installed 1.5.5
Adapter    "linux-control": 1.1.3    , installed 1.1.3
Adapter    "logparser"    : 2.1.1    , installed 2.1.1
Adapter    "luftdaten"    : 2.2.4    , installed 2.2.4
Adapter    "meteoalarm"   : 2.3.5    , installed 2.3.5
Adapter    "mihome-vacuum": 3.9.5    , installed 3.9.5
Adapter    "mobile"       : 1.0.1    , installed 1.0.1
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "netatmo"      : 2.0.5    , installed 2.0.5
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "netatmo-energy": 2.3.1   , installed 2.3.1
Adapter    "nuki"         : 1.6.0    , installed 1.6.0
Adapter    "nuki-extended": 2.3.1    , installed 2.3.1
Adapter    "nut"          : 1.6.0    , installed 1.6.0
Adapter    "onvif"        : 1.0.4    , installed 1.0.4
Adapter    "openweathermap": 0.3.3   , installed 0.3.3
Adapter    "owntracks"    : 1.0.5    , installed 1.0.5
Adapter    "parser"       : 1.1.8    , installed 1.1.8
Adapter    "paw"          : 0.3.2    , installed 0.3.2
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pushbullet"   : 0.0.11   , installed 0.0.11
Adapter    "radar2"       : 2.0.3    , installed 2.0.3
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "sayit"        : 1.12.3   , installed 1.12.3
Adapter    "shelly"       : 6.3.1    , installed 6.3.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartcontrol" : 1.3.2    , installed 1.3.2
Adapter    "snmp"         : 2.4.6    , installed 2.4.6
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "sonoff"       : 2.5.1    , installed 2.5.1
Adapter    "spotify-premium": 1.2.1  , installed 1.2.1
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "telegram"     : 1.15.2   , installed 1.15.2
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "tuya"         : 3.13.1   , installed 3.13.1
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "virtualpowermeter": 1.4.6, installed 1.4.6
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "wifilight"    : 1.1.4    , installed 1.1.4
Adapter    "windows-control": 0.1.5  , installed 0.1.5
Adapter    "withings"     : 0.0.13   , installed 0.0.13
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "xbox"         : 1.0.2    , installed 1.0.2
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        29904
States:         24682

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_16.x bullseye InRelease
Hit:4 http://deb.debian.org/debian bullseye-updates InRelease
Hit:5 https://packages.sury.org/php bullseye InRelease
Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:7 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       15749      514/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       15742      514/iobroker.js-con
tcp        0      0 192.168.1.139:1884      0.0.0.0:*               LISTEN      1001       14194      1063/io.sonoff.0
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1001       23895      1756/io.jarvis.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11929      562/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       13956      1009/io.owntracks.0
tcp6       0      0 :::51989                :::*                    LISTEN      1001       17211      1210/io.nuki-extend
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15209      765/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       26807      2137/io.web.0
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       24036      2065/io.socketio.0
tcp6       0      0 :::80                   :::*                    LISTEN      0          15000      573/apache2
tcp6       0      0 :::22                   :::*                    LISTEN      0          11931      562/sshd: /usr/sbin
tcp6       0      0 :::9999                 :::*                    LISTEN      0          15004      573/apache2
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       17814      1161/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       17815      1161/io.tuya.0
udp        0      0 0.0.0.0:44617           0.0.0.0:*                           1001       26831      2048/io.snmp.0
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1001       22280      2003/io.radar2.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13240      827/dhcpcd
udp        0      0 0.0.0.0:53421           0.0.0.0:*                           1001       16758      964/io.mihome-vacuu
udp        0    768 0.0.0.0:46003           0.0.0.0:*                           1001       32789      2241/io.xbox.0
udp        0      0 0.0.0.0:42092           0.0.0.0:*                           1001       26718      2091/io.upnp.0
udp        0      0 192.168.1.139:5353      0.0.0.0:*                           1001       17759      1144/io.tr-064.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12881      397/avahi-daemon: r
udp        0      0 0.0.0.0:38559           0.0.0.0:*                           1001       16663      857/io.javascript.0
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       25730      2091/io.upnp.0
udp        0      0 0.0.0.0:59680           0.0.0.0:*                           108        12883      397/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        12882      397/avahi-daemon: r
udp6       0      0 :::51466                :::*                                108        12884      397/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-04-16 20:43:57.659  - info: radar2.0 (2003) first scan took 18.02 seconds
2023-04-16 20:43:57.660  - info: radar2.0 (2003) will scan external network every  60  minutes
2023-04-16 20:43:57.713  - info: followthesun.0 (2396) Started with JSON-Explorer version 0.1.10
2023-04-16 20:43:57.716  - info: followthesun.0 (2396) Sun position calculation will be done every 120 seconds
2023-04-16 20:43:57.722  - info: followthesun.0 (2396) Daily sun parameter calculation scheduled for 00:00:33
2023-04-16 20:43:58.289  - info: radar2.0 (2003) Adapter initialization finished!
2023-04-16 20:43:58.390  - info: netatmo-crawler.0 (1845) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2023-04-16 20:44:02.779  - info: host.raspberrypi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-04-16 20:44:03.617  - info: info.0 (1670) starting. Version 1.9.19 in /opt/iobroker/node_modules/iobroker.info, node: v18.16.0, js-controller: 4.0.24
2023-04-16 20:44:04.083  - info: info.0 (1670) Reading/updating systemdata.
2023-04-16 20:44:05.316  - info: xbox.0 (2241) starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.xbox, node: v18.16.0, js-controller: 4.0.24
2023-04-16 20:44:06.014  - info: xbox.0 (2241) Successfully loaded token
2023-04-16 20:44:06.717  - info: xbox.0 (2241) Xbox login url available at: https://login.live.com/oauth20_authorize.srf?client_id=5e5ead27-ed60-482d-b3fc-702b28a97404&response_type=code&approval_prompt=auto&scope=XboxLive.signin%20XboxLive.offline_access&redirect_uri=http%3A%2F%2Flocalhost%3A8080%2Fauth%2Fcallback
2023-04-16 20:44:06.720  - info: xbox.0 (2241) Copy the token (value after code=) after login into "apiToken" of the adapter config to enable the Xbox api
2023-04-16 20:44:06.762  - warn: xbox.0 (2241) Could not poll API: "No oauth token found. Run authentication flow first"
2023-04-16 20:44:07.626  - info: info.0 (1670) State value to set for "info.0.sysinfo.cpu.info.speed" has to be type "string" but received type "number"
2023-04-16 20:44:08.460  - info: info.0 (1670) State value to set for "info.0.sysinfo.cpu.info.cache-l3" has to be type "number" but received type "string"
2023-04-16 20:44:08.814  - info: smartcontrol.0 (2036) Subscribing to all target devices and trigger states. 4 trigger schedules activated...
2023-04-16 20:44:09.510  - info: info.0 (1670) cpu Temp res = {"main":55.504,"cores":[],"max":55.504,"socket":[],"chipset":null}
2023-04-16 20:44:28.270  - info: netatmo-energy.0 (1948) API-Anfrage starten: homestatus
2023-04-16 20:44:32.394  - info: coronavirus-statistics.0 (1281) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2023-04-16 20:44:33.280  - info: host.raspberrypi instance system.adapter.coronavirus-statistics.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-04-16 20:44:41.850  - info: fuelpricemonitor.0 (1616) Terminated (NO_ERROR): Without reason
2023-04-16 20:44:42.436  - info: fuelpricemonitor.0 (1616) cleaned everything up...
2023-04-16 20:44:42.680  - info: host.raspberrypi instance system.adapter.fuelpricemonitor.0 terminated with code 0 (NO_ERROR)

Summary


======================= SUMMARY =======================
                     v.2023-04-16


Operatingsystem:        Debian GNU/Linux 11 (bullseye)
Kernel:                 6.1.21-v8+
Installation:           Native
Timezone:               Europe/Vienna (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v18.16.0
                        /usr/bin/node           v18.16.0
                        /usr/bin/npm            9.5.1
                        /usr/bin/npx            9.5.1

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            7.8G        2.9G        4.1G        6.0M        797M        4.8G
Swap:            99M          0B         99M
Total:          7.9G        2.9G        4.2G

Active iob-Instances:   57
Active repo(s): stable

ioBroker Core:          js-controller           4.0.24
                        admin                   6.3.5

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                29904
States:                 24682

Size of iob-Database:

27M     /opt/iobroker/iobroker-data/objects.jsonl
14M     /opt/iobroker/iobroker-data/states.jsonl

Iobroker log

javascript.0
2023-04-16 20:48:57.954	warn	Read-only state "javascript.0.MiHomeAll.lumi.158d0002a3299c.info.rssi" has been written without ack-flag with value "0"

javascript.0
2023-04-16 20:48:57.946	warn	Read-only state "javascript.0.MiHomeAll.396976417.info.rssi" has been written without ack-flag with value "-55"

javascript.0
2023-04-16 20:48:57.943	warn	Read-only state "javascript.0.MiHomeAll.lumi.158d0004ac0836.info.rssi" has been written without ack-flag with value "0"

javascript.0
2023-04-16 20:48:57.939	warn	Read-only state "javascript.0.MiHomeAll.408471265.info.rssi" has been written without ack-flag with value "-46"

javascript.0
2023-04-16 20:48:57.717	warn	script.js.XiaomiGeraeteCN: No supported Devices found!


tuya.0
2023-04-16 20:49:52.026	warn	80157022e0980602099a: Error on Reconnect (1): connect ECONNRESET 192.168.1.212:6668

tuya.0
2023-04-16 20:49:52.016	warn	80248051e098069e47eb: Error on Reconnect (1): connect ECONNRESET 192.168.1.167:6668

tuya.0
2023-04-16 20:49:51.953	warn	47804507a4cf12ccd3ef: Error on Reconnect (1): connect ECONNRESET 192.168.1.161:6668

tuya.0
2023-04-16 20:49:51.820	warn	80157022e09806010425: Error on Reconnect (1): connect ECONNRESET 192.168.1.194:6668

wifilight.0
2023-04-16 20:49:51.495	error	wrong device type. not yet supported!

wifilight.0
2023-04-16 20:49:51.492	error	config.device.type "" (HF-LPT120) is not a known device type. Skipping this device! Known types are: LW12, LD382A, LD686, LD382, UFO, MiLight, MiLightRGB, MiLightW

rpi2.0
2023-04-16 20:49:30.607	error	No Value found for cpu_frequency

netatmo.0
2023-04-16 20:49:17.457	warn	API Error: Please Authenticate manually once using the Admin UI of this instance.


backitup.0
2023-04-16 20:50:13.179	error	Dropbox: "expired_access_token/."

backitup.0
2023-04-16 20:50:13.160	error	Dropbox: "expired_access_token/."

nuki-extended.0
2023-04-16 20:50:05.279	warn	getWebApi(): Error retrieving smartlocks: Cannot read properties of undefined (reading 'toLowerCase')

zigbee.0
2023-04-16 20:50:05.063	warn	Extended PAN ID is reversed (expected=51b8a11c004b1200, actual=00124b001ca1b851)

nuki-extended.0
2023-04-16 20:50:03.493	warn	Failed retrieving /list from Nuki Bridge with name Schiess Nuki Bridge (forcePlainToken: false)!


firetv.0
2023-04-16 20:50:33.728	error	can not connect to 192.168.1.208 Error=spawn adb ENOENT

firetv.0
2023-04-16 20:50:33.634	error	adb executable not found. undefined


zigbee.0
2023-04-16 20:50:49.101	error	DeviceConfigure:Failed to DeviceConfigure.configure 0x003c84fffeb3dbf7 TS0044 (Error: Read 0x003c84fffeb3dbf7/1 genBasic(["manufacturerName","zclVersion","appVersion","modelId","powerSource",65534], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Data request failed with error: 'MAC transaction expired' (240)) at ZStackAdapter.sendZclFrameToEndpointInternal (/opt/iobroker/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:415:23) at Queue.executeNext (/opt/iobroker/node_modules/zigbee-herdsman/src/utils/queue.ts:32:32))


onvif.0
2023-04-16 20:51:56.636	error	Error during discovery: Error: Wrong ONVIF SOAP response,Error: Wrong ONVIF SOAP response,Error: Wrong ONVIF SOAP response,TypeError: Cannot read properties of undefined (reading 'endpointReference'),TypeError: Cannot read properties of undefined (reading 'endpointReference')

onvif.0
2023-04-16 20:51:52.776	error	Error Error: ONVIF SOAP Fault: The action requested requires authorization and the sender is not authorized

onvif.0
2023-04-16 20:51:52.775	error	Failed to login to 192.168.1.218:8000 with admin:$*****************************************************************************7

onvif.0
2023-04-16 20:51:52.539	error	Error Error: ONVIF SOAP Fault: The action requested requires authorization and the sender is not authorized

onvif.0
2023-04-16 20:51:52.538	error	Failed to login to 192.168.1.211:8000 with admin:$*****************************************************************************7

onvif.0
2023-04-16 20:51:52.320	error	undefined

onvif.0
2023-04-16 20:51:52.320	error	<?xml version="1.0" ?> <soap:Envelope > <soap:Header> <wsa:Action>http://schemas.xmlsoap.org/ws/2005/04/discovery/ProbeMatches</wsa:Action> <wsa:MessageID>urn:uuid:0eaaa933-a101-4933-86f1-3ce46179ab26</wsa:MessageID> <wsa:RelatesTo>urn:uuid:8d65c8dd-fa75-977b-db4d-fc1d23082a1c</wsa:RelatesTo> <wsa:To>http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</wsa:To> <wsd:AppSequence InstanceId="1170846535" MessageNumber="1"/> </soap:Header> <soap:Body> <wsd:ProbeMatches/> </soap:Body> </soap:Envelope>

onvif.0
2023-04-16 20:51:52.319	error	Discovery error Wrong SOAP message from 192.168.1.135:35191

onvif.0
2023-04-16 20:51:52.222	error	undefined

onvif.0
2023-04-16 20:51:52.221	error	<?xml version="1.0" ?> <soap:Envelope > <soap:Header> <wsa:Action>http://schemas.xmlsoap.org/ws/2005/04/discovery/ProbeMatches</wsa:Action> <wsa:MessageID>urn:uuid:0eaaa933-a101-4933-86f1-3ce46179ab26</wsa:MessageID> <wsa:RelatesTo>urn:uuid:8d65c8dd-fa75-977b-db4d-fc1d23082a1c</wsa:RelatesTo> <wsa:To>http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</wsa:To> <wsd:AppSequence InstanceId="1170846535" MessageNumber="1"/> </soap:Header> <soap:Body> <wsd:ProbeMatches/> </soap:Body> </soap:Envelope>

onvif.0
2023-04-16 20:51:52.219	error	Discovery error Wrong SOAP message from 192.168.1.135:35191

onvif.0
2023-04-16 20:51:52.137	error	Error Error: connect ECONNREFUSED 192.168.1.115:8000

onvif.0
2023-04-16 20:51:52.136	error	Failed to login to 192.168.1.115:8000 with admin:$*****************************************************************************7

onvif.0
2023-04-16 20:51:51.863	error	undefined

onvif.0
2023-04-16 20:51:51.862	error	

onvif.0
2023-04-16 20:51:51.862	error	Discovery error Wrong SOAP message from 192.168.1.211:3702

onvif.0
2023-04-16 20:51:51.848	error	undefined

onvif.0
2023-04-16 20:51:51.847	error	

onvif.0
2023-04-16 20:51:51.846	error	Discovery error Wrong SOAP message from 192.168.1.218:3702

onvif.0
2023-04-16 20:51:51.816	error	undefined

onvif.0
2023-04-16 20:51:51.814	error	

onvif.0
2023-04-16 20:51:51.813	error	Discovery error Wrong SOAP message from 192.168.1.115:3702

linux-control.0
2023-04-16 20:51:44.647	warn	This object will not be created in future versions. Please report this to the developer.

linux-control.0
2023-04-16 20:51:44.645	warn	Object linux-control.0.command.host is invalid: obj.common.states has an invalid type! Expected "object", received "string"

linux-control.0
2023-04-16 20:51:40.863	warn	This object will not be created in future versions. Please report this to the developer.

linux-control.0
2023-04-16 20:51:40.855	warn	Object linux-control.0.command.host is invalid: obj.common.states has an invalid type! Expected "object", received "string"

Werde daher wieder auf 16 gehen, außer ihr wisst eine Lösung für die Fehler

Mein aktueller Status

which nodejs node npm && nodejs -v && node -v && npm -v && apt policy nodejs
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
v16.19.1
v16.19.1
8.19.3
nodejs:
  Installed: 16.19.1-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
     18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
 *** 16.19.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages