Nach Neuinstallation+Backup RAM läuft langsam voll
-
Hallo zusammen,
nach meiner gestrigen Neuinstallation des RPi4 und anschließendem Aufspielen des Backups ist mir der Pi die Nacht abgestürzt.
Ich habe gesehen, dass der RAM vollgelaufen ist und auch die eingestellte 2GB Swap.
Das Problem hatte ich vorher gar nicht. Es waren eigentlich immer 2GB nach frei.Es dauert so grob 6Std. bis der RAM voll ist.
Hier mal ein htop:
und eine Auswertung in VIS:
Oder liegt es generell an der neuen PI Software?
Raspberry Pi OS with desktop
Release date: February 21st 2023
System: 64-bit
Kernel version: 5.15
Debian version: 11 (bullseye)Mein ioBroker System ist wie folgt:
Plattform: linux
Betriebssystem: linux
Architektur: arm64
CPUs: 4
Geschwindigkeit: 1500 MHz
Modell: Cortex-A72
RAM: 3.7 GB
System-Betriebszeit: 00:01:45
Node.js: v16.19.1
time: 1677348075708
timeOffset: -60
Adapter-Anzahl: 558
NPM: v8.19.3
Datenträgergröße: 109.7 GB
Freier Festplattenspeicher: 101.0 GB
Betriebszeit: 00:01:57
Aktive Instanzen: 21
Pfad: /opt/iobroker/
aktiv:Generell ist nach einem Reboot 1GB weniger RAM verfügbar.
Hat jemand eine Idee was das sein könnte?
-
Hallo zusammen,
nach meiner gestrigen Neuinstallation des RPi4 und anschließendem Aufspielen des Backups ist mir der Pi die Nacht abgestürzt.
Ich habe gesehen, dass der RAM vollgelaufen ist und auch die eingestellte 2GB Swap.
Das Problem hatte ich vorher gar nicht. Es waren eigentlich immer 2GB nach frei.Es dauert so grob 6Std. bis der RAM voll ist.
Hier mal ein htop:
und eine Auswertung in VIS:
Oder liegt es generell an der neuen PI Software?
Raspberry Pi OS with desktop
Release date: February 21st 2023
System: 64-bit
Kernel version: 5.15
Debian version: 11 (bullseye)Mein ioBroker System ist wie folgt:
Plattform: linux
Betriebssystem: linux
Architektur: arm64
CPUs: 4
Geschwindigkeit: 1500 MHz
Modell: Cortex-A72
RAM: 3.7 GB
System-Betriebszeit: 00:01:45
Node.js: v16.19.1
time: 1677348075708
timeOffset: -60
Adapter-Anzahl: 558
NPM: v8.19.3
Datenträgergröße: 109.7 GB
Freier Festplattenspeicher: 101.0 GB
Betriebszeit: 00:01:57
Aktive Instanzen: 21
Pfad: /opt/iobroker/
aktiv:Generell ist nach einem Reboot 1GB weniger RAM verfügbar.
Hat jemand eine Idee was das sein könnte?
-
@thomas-braun sagte in Nach Neuinstallation+Backup RAM läuft langsam voll:
iob diag
Desktop brauche ich manchmal und hatte schon immer damit funktioniert.
Kann man den einfach so bei Bedarf ein- und ausschalten?iob diagCooler Befehl - kannte ich noch nicht.
Hier die Auswertung:
======== Start marking the full check here ========= Skript v.2023-01-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.2 Architecture: aarch64 Docker: false Virtualization: none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 19:46:11 up 46 min, 3 users, load average: 5.45, 4.61, 3.39 CPU threads: 4 *** Time and Time Zones *** Sat Feb 25 18:46:11 UTC 2023 Sat Feb 25 19:46:11 CET 2023 CET +0100 Europe/Berlin *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.9G 345M 42M 562M 790M Swap: 2.0G 3.0M 2.0G Total: 5.8G 2.9G 2.3G 3793 M total memory 2885 M used memory 224 M active memory 2968 M inactive memory 345 M free memory 30 M buffer memory 531 M swap cache 1999 M total swap 3 M used swap 1996 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 110G 8.7G 97G 9% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.3M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 31M 225M 12% /boot tmpfs tmpfs 380M 20K 380M 1% /run/user/1000 Messages in dmesg: [Sat Feb 25 18:59:30 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60D smsc95xx.macaddr=E4:5F:01:05:FC:ED vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=5aa1e2fd-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Sat Feb 25 18:59:31 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sat Feb 25 18:59:31 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Sat Feb 25 18:59:33 2023] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.5G /var/ 176M /var/lib 167M /var/cache 160M /var/cache/apt 127M /var/log /opt/iobroker/backups: 44M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.3G /opt/iobroker/iobroker-data/ 664M /opt/iobroker/iobroker-data/history 491M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 51M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map 27M /opt/iobroker/iobroker-data/states.jsonl 19M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e8e2aac0.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.fe83292c.js.map *** NodeJS-Installation *** /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 nodejs: Installed: 16.19.1-deb-1nodesource1 Candidate: 16.19.1-deb-1nodesource1 Version table: *** 16.19.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u3 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.3.6 javascript: 7.0.1 Adapters from github: 7 Adapter State + system.adapter.admin.0 : admin : RPI4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : RPI4 - disabled system.adapter.alias-manager.0 : alias-manager : RPI4 - disabled + system.adapter.backitup.0 : backitup : RPI4 - enabled + system.adapter.ble.0 : ble : RPI4 - enabled + system.adapter.canbus.0 : canbus : RPI4 - enabled system.adapter.cloud.0 : cloud : RPI4 - disabled system.adapter.daswetter.0 : daswetter : RPI4 - enabled + system.adapter.denon.0 : denon : RPI4 - enabled system.adapter.device-watcher.0 : device-watcher : RPI4 - disabled system.adapter.devices.0 : devices : RPI4 - disabled system.adapter.discovery.0 : discovery : RPI4 - disabled + system.adapter.email.0 : email : RPI4 - enabled + system.adapter.enigma2.0 : enigma2 : RPI4 - enabled + system.adapter.eventlist.0 : eventlist : RPI4 - enabled system.adapter.flot.0 : flot : RPI4 - disabled system.adapter.fullybrowser.0 : fullybrowser : RPI4 - disabled + system.adapter.heos.0 : heos : RPI4 - enabled + system.adapter.history.0 : history : RPI4 - enabled + system.adapter.hm-rega.0 : hm-rega : RPI4 - enabled + system.adapter.hm-rpc.0 : hm-rpc : RPI4 - enabled, port: 0 system.adapter.ical.0 : ical : RPI4 - enabled system.adapter.icons-icons8.0 : icons-icons8 : RPI4 - disabled system.adapter.icons-material-png.0 : icons-material-png : RPI4 - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : RPI4 - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : RPI4 - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: RPI4 - disabled system.adapter.info.0 : info : RPI4 - disabled system.adapter.iot.0 : iot : RPI4 - disabled + system.adapter.javascript.0 : javascript : RPI4 - enabled + system.adapter.modbus.0 : modbus : RPI4 - enabled + system.adapter.mqtt.0 : mqtt : RPI4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : RPI4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.niu.0 : niu : RPI4 - enabled + system.adapter.parser.0 : parser : RPI4 - enabled + system.adapter.ping.0 : ping : RPI4 - enabled system.adapter.proxy.0 : proxy : RPI4 - disabled + system.adapter.psa.0 : psa : RPI4 - enabled + system.adapter.rpi2.0 : rpi2 : RPI4 - enabled system.adapter.rtspstream.0 : rtspstream : RPI4 - disabled, port: 8084 system.adapter.samsung.0 : samsung : RPI4 - disabled system.adapter.samsung_tizen.0 : samsung_tizen : RPI4 - disabled, port: 8002 + system.adapter.scenes.0 : scenes : RPI4 - enabled + system.adapter.smartmeter.0 : smartmeter : RPI4 - enabled + system.adapter.smartmeter.1 : smartmeter : RPI4 - enabled system.adapter.smartthings.0 : smartthings : RPI4 - disabled + system.adapter.sonoff.0 : sonoff : RPI4 - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : RPI4 - enabled + system.adapter.statistics.0 : statistics : RPI4 - enabled system.adapter.sunnyportal.0 : sunnyportal : RPI4 - disabled + system.adapter.tankerkoenig.0 : tankerkoenig : RPI4 - enabled + system.adapter.telegram.0 : telegram : RPI4 - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tvspielfilm.0 : tvspielfilm : RPI4 - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : RPI4 - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : RPI4 - disabled system.adapter.vis-history.0 : vis-history : RPI4 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : RPI4 - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : RPI4 - disabled system.adapter.vis-map.0 : vis-map : RPI4 - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : RPI4 - disabled system.adapter.vis-rgraph.0 : vis-rgraph : RPI4 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : RPI4 - disabled system.adapter.vis.0 : vis : RPI4 - enabled system.adapter.vr200.0 : vr200 : RPI4 - disabled + system.adapter.web.0 : web : RPI4 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wireless-mbus.0 : wireless-mbus : RPI4 - enabled system.adapter.wlanthermo-nano.0 : wlanthermo-nano : RPI4 - disabled system.adapter.wled.0 : wled : RPI4 - disabled + system.adapter.worx.0 : worx : RPI4 - enabled + system.adapter.yahoo-stock-market.0 : yahoo-stock-market : RPI4 - enabled + system.adapter.zigbee.0 : zigbee : RPI4 - enabled, port: /dev/ttyUSB2 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : RPI4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : RPI4 - enabled, port: 0 + system.adapter.mqtt.0 : mqtt : RPI4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : RPI4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : RPI4 - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : RPI4 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : RPI4 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : RPI4 - enabled, port: /dev/ttyUSB2 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): beta Installed ioBroker-Instances Used repository: beta Adapter "admin" : 6.3.6 , installed 6.3.6 Adapter "alarm" : 3.3.9 , installed 3.3.9 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.6.3 , installed 2.6.3 Adapter "ble" : 0.13.3 , installed 0.13.3 Adapter "canbus" : 1.3.1 , installed 1.3.1 Adapter "cloud" : 4.3.1 , installed 4.3.1 Adapter "daswetter" : 3.1.7 , installed 3.1.7 Adapter "denon" : 1.15.0 , installed 1.15.0 Adapter "device-watcher": 2.6.0 , installed 2.6.0 Adapter "devices" : 1.1.2 , installed 1.1.2 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "email" : 1.1.4 , installed 1.1.4 Adapter "eventlist" : 1.2.2 , installed 1.2.2 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "heos" : 1.12.0 , installed 1.12.0 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hm-rega" : 3.0.44 , installed 3.0.44 Adapter "hm-rpc" : 1.15.16 , installed 1.15.16 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.3 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.3 , installed 1.14.3 Adapter "javascript" : 7.0.1 , installed 7.0.1 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt" : 4.0.7 , installed 4.0.7 Adapter "niu" : 0.0.3 , installed 0.0.3 Adapter "parser" : 1.3.2 , installed 1.3.2 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "proxy" : 1.3.2 , installed 1.3.2 Adapter "psa" : 0.0.11 , installed 0.0.11 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "samsung" : 0.5.11 , installed 0.5.11 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "smartthings" : 0.0.4 , installed 0.0.4 Adapter "socketio" : 6.3.3 , installed 6.3.3 Adapter "sonoff" : 2.5.1 , installed 2.5.1 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "tvspielfilm" : 2.0.5 , installed 2.0.5 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.3.1 , installed 1.3.1 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.86 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vr200" : 1.0.0 , installed 1.1.0 Adapter "web" : 5.5.1 , installed 5.5.1 Adapter "wireless-mbus": 0.8.8 , installed 0.8.8 Adapter "wlanthermo-nano": 0.2.1 , installed 0.2.1 Adapter "wled" : 0.6.7 , installed 0.6.7 Adapter "worx" : 2.0.3 , installed 2.0.3 Adapter "ws" : 2.3.5 , installed 2.3.5 Adapter "yahoo-stock-market": 0.0.3, installed 0.0.4 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 26499 States: 24848 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 12933 704/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 15882 707/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 16792 707/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15461 747/sshd: /usr/sbin tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 17037 1551/io.mqtt.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 19963 2037/io.sonoff.0 tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 0 13083 724/vncserver-x11-c tcp 0 0 192.168.178.18:2001 0.0.0.0:* LISTEN 1001 15282 1502/io.hm-rpc.0 tcp6 0 0 ::1:631 :::* LISTEN 0 12932 704/cupsd tcp6 0 0 :::22 :::* LISTEN 0 15463 747/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 15965 1381/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 20801 2110/io.web.0 tcp6 0 0 :::5900 :::* LISTEN 0 13082 724/vncserver-x11-c udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12027 574/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 17462 648/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 15478 754/cups-browsed udp 0 0 0.0.0.0:47890 0.0.0.0:* 108 12029 574/avahi-daemon: r udp 0 0 0.0.0.0:39771 0.0.0.0:* 1001 21697 2305/io.heos.0 udp6 0 0 :::5353 :::* 108 12028 574/avahi-daemon: r udp6 0 0 :::55231 :::* 108 12030 574/avahi-daemon: r udp6 0 0 :::546 :::* 0 17547 648/dhcpcd *** Log File - Last 25 Lines *** 2023-02-25 19:46:15.302 - error: daswetter.0 (10403) Cannot check object existence of "daswetter.0.NextHours.Location_1.Day_3.Hour_16.wind_symbolB": Connection is closed. 2023-02-25 19:46:15.355 - error: host.RPI4 instance system.adapter.daswetter.0 terminated with code 15 (UNKNOWN_ERROR) 2023-02-25 19:46:15.957 - info: niu.0 (2333) State value to set for "niu.0.NA2L4A11702NAXL1.scooter_info.shakingValue" has to be type "number" but received type "string" 2023-02-25 19:46:23.468 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:46:25.622 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:46:25.623 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:46:34.267 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:46:37.631 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:46:37.632 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:46:45.676 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:46:49.637 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:46:49.638 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:46:57.132 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:47:01.646 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:47:01.648 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:47:08.626 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:47:13.658 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:47:13.660 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:47:19.980 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:47:25.669 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:47:25.670 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:47:31.277 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:47:37.674 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:47:37.676 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:47:42.717 - info: smartmeter.0 (1970) Received 10 values, 3 updated ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summaryUnd Summary:
======================= SUMMARY ======================= v.2023-01-02 Operatingsystem: Debian GNU/Linux 11 (bullseye) Installation: Native Timezone: Europe/Berlin User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 0 Nodejs-Installation: /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 ioBroker Core: js-controller 4.0.24 admin 6.3.6 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin: + system.adapter.admin.0 : admin : RPI4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin Pending iob updates: 0 Active repo(s): beta Objects: 26499 States: 24848 Size of iob-Database: 33M /opt/iobroker/iobroker-data/objects.jsonl 29M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== -
@thomas-braun sagte in Nach Neuinstallation+Backup RAM läuft langsam voll:
iob diag
Desktop brauche ich manchmal und hatte schon immer damit funktioniert.
Kann man den einfach so bei Bedarf ein- und ausschalten?iob diagCooler Befehl - kannte ich noch nicht.
Hier die Auswertung:
======== Start marking the full check here ========= Skript v.2023-01-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.2 Architecture: aarch64 Docker: false Virtualization: none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 19:46:11 up 46 min, 3 users, load average: 5.45, 4.61, 3.39 CPU threads: 4 *** Time and Time Zones *** Sat Feb 25 18:46:11 UTC 2023 Sat Feb 25 19:46:11 CET 2023 CET +0100 Europe/Berlin *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.9G 345M 42M 562M 790M Swap: 2.0G 3.0M 2.0G Total: 5.8G 2.9G 2.3G 3793 M total memory 2885 M used memory 224 M active memory 2968 M inactive memory 345 M free memory 30 M buffer memory 531 M swap cache 1999 M total swap 3 M used swap 1996 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 110G 8.7G 97G 9% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.3M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 31M 225M 12% /boot tmpfs tmpfs 380M 20K 380M 1% /run/user/1000 Messages in dmesg: [Sat Feb 25 18:59:30 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60D smsc95xx.macaddr=E4:5F:01:05:FC:ED vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=5aa1e2fd-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Sat Feb 25 18:59:31 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sat Feb 25 18:59:31 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Sat Feb 25 18:59:33 2023] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.5G /var/ 176M /var/lib 167M /var/cache 160M /var/cache/apt 127M /var/log /opt/iobroker/backups: 44M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.3G /opt/iobroker/iobroker-data/ 664M /opt/iobroker/iobroker-data/history 491M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 51M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map 27M /opt/iobroker/iobroker-data/states.jsonl 19M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e8e2aac0.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.fe83292c.js.map *** NodeJS-Installation *** /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 nodejs: Installed: 16.19.1-deb-1nodesource1 Candidate: 16.19.1-deb-1nodesource1 Version table: *** 16.19.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u3 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.3.6 javascript: 7.0.1 Adapters from github: 7 Adapter State + system.adapter.admin.0 : admin : RPI4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : RPI4 - disabled system.adapter.alias-manager.0 : alias-manager : RPI4 - disabled + system.adapter.backitup.0 : backitup : RPI4 - enabled + system.adapter.ble.0 : ble : RPI4 - enabled + system.adapter.canbus.0 : canbus : RPI4 - enabled system.adapter.cloud.0 : cloud : RPI4 - disabled system.adapter.daswetter.0 : daswetter : RPI4 - enabled + system.adapter.denon.0 : denon : RPI4 - enabled system.adapter.device-watcher.0 : device-watcher : RPI4 - disabled system.adapter.devices.0 : devices : RPI4 - disabled system.adapter.discovery.0 : discovery : RPI4 - disabled + system.adapter.email.0 : email : RPI4 - enabled + system.adapter.enigma2.0 : enigma2 : RPI4 - enabled + system.adapter.eventlist.0 : eventlist : RPI4 - enabled system.adapter.flot.0 : flot : RPI4 - disabled system.adapter.fullybrowser.0 : fullybrowser : RPI4 - disabled + system.adapter.heos.0 : heos : RPI4 - enabled + system.adapter.history.0 : history : RPI4 - enabled + system.adapter.hm-rega.0 : hm-rega : RPI4 - enabled + system.adapter.hm-rpc.0 : hm-rpc : RPI4 - enabled, port: 0 system.adapter.ical.0 : ical : RPI4 - enabled system.adapter.icons-icons8.0 : icons-icons8 : RPI4 - disabled system.adapter.icons-material-png.0 : icons-material-png : RPI4 - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : RPI4 - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : RPI4 - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: RPI4 - disabled system.adapter.info.0 : info : RPI4 - disabled system.adapter.iot.0 : iot : RPI4 - disabled + system.adapter.javascript.0 : javascript : RPI4 - enabled + system.adapter.modbus.0 : modbus : RPI4 - enabled + system.adapter.mqtt.0 : mqtt : RPI4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : RPI4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.niu.0 : niu : RPI4 - enabled + system.adapter.parser.0 : parser : RPI4 - enabled + system.adapter.ping.0 : ping : RPI4 - enabled system.adapter.proxy.0 : proxy : RPI4 - disabled + system.adapter.psa.0 : psa : RPI4 - enabled + system.adapter.rpi2.0 : rpi2 : RPI4 - enabled system.adapter.rtspstream.0 : rtspstream : RPI4 - disabled, port: 8084 system.adapter.samsung.0 : samsung : RPI4 - disabled system.adapter.samsung_tizen.0 : samsung_tizen : RPI4 - disabled, port: 8002 + system.adapter.scenes.0 : scenes : RPI4 - enabled + system.adapter.smartmeter.0 : smartmeter : RPI4 - enabled + system.adapter.smartmeter.1 : smartmeter : RPI4 - enabled system.adapter.smartthings.0 : smartthings : RPI4 - disabled + system.adapter.sonoff.0 : sonoff : RPI4 - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : RPI4 - enabled + system.adapter.statistics.0 : statistics : RPI4 - enabled system.adapter.sunnyportal.0 : sunnyportal : RPI4 - disabled + system.adapter.tankerkoenig.0 : tankerkoenig : RPI4 - enabled + system.adapter.telegram.0 : telegram : RPI4 - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tvspielfilm.0 : tvspielfilm : RPI4 - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : RPI4 - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : RPI4 - disabled system.adapter.vis-history.0 : vis-history : RPI4 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : RPI4 - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : RPI4 - disabled system.adapter.vis-map.0 : vis-map : RPI4 - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : RPI4 - disabled system.adapter.vis-rgraph.0 : vis-rgraph : RPI4 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : RPI4 - disabled system.adapter.vis.0 : vis : RPI4 - enabled system.adapter.vr200.0 : vr200 : RPI4 - disabled + system.adapter.web.0 : web : RPI4 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wireless-mbus.0 : wireless-mbus : RPI4 - enabled system.adapter.wlanthermo-nano.0 : wlanthermo-nano : RPI4 - disabled system.adapter.wled.0 : wled : RPI4 - disabled + system.adapter.worx.0 : worx : RPI4 - enabled + system.adapter.yahoo-stock-market.0 : yahoo-stock-market : RPI4 - enabled + system.adapter.zigbee.0 : zigbee : RPI4 - enabled, port: /dev/ttyUSB2 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : RPI4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : RPI4 - enabled, port: 0 + system.adapter.mqtt.0 : mqtt : RPI4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : RPI4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : RPI4 - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : RPI4 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : RPI4 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : RPI4 - enabled, port: /dev/ttyUSB2 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): beta Installed ioBroker-Instances Used repository: beta Adapter "admin" : 6.3.6 , installed 6.3.6 Adapter "alarm" : 3.3.9 , installed 3.3.9 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.6.3 , installed 2.6.3 Adapter "ble" : 0.13.3 , installed 0.13.3 Adapter "canbus" : 1.3.1 , installed 1.3.1 Adapter "cloud" : 4.3.1 , installed 4.3.1 Adapter "daswetter" : 3.1.7 , installed 3.1.7 Adapter "denon" : 1.15.0 , installed 1.15.0 Adapter "device-watcher": 2.6.0 , installed 2.6.0 Adapter "devices" : 1.1.2 , installed 1.1.2 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "email" : 1.1.4 , installed 1.1.4 Adapter "eventlist" : 1.2.2 , installed 1.2.2 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "heos" : 1.12.0 , installed 1.12.0 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hm-rega" : 3.0.44 , installed 3.0.44 Adapter "hm-rpc" : 1.15.16 , installed 1.15.16 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.3 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.3 , installed 1.14.3 Adapter "javascript" : 7.0.1 , installed 7.0.1 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt" : 4.0.7 , installed 4.0.7 Adapter "niu" : 0.0.3 , installed 0.0.3 Adapter "parser" : 1.3.2 , installed 1.3.2 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "proxy" : 1.3.2 , installed 1.3.2 Adapter "psa" : 0.0.11 , installed 0.0.11 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "samsung" : 0.5.11 , installed 0.5.11 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "smartthings" : 0.0.4 , installed 0.0.4 Adapter "socketio" : 6.3.3 , installed 6.3.3 Adapter "sonoff" : 2.5.1 , installed 2.5.1 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "tvspielfilm" : 2.0.5 , installed 2.0.5 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.3.1 , installed 1.3.1 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.86 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vr200" : 1.0.0 , installed 1.1.0 Adapter "web" : 5.5.1 , installed 5.5.1 Adapter "wireless-mbus": 0.8.8 , installed 0.8.8 Adapter "wlanthermo-nano": 0.2.1 , installed 0.2.1 Adapter "wled" : 0.6.7 , installed 0.6.7 Adapter "worx" : 2.0.3 , installed 2.0.3 Adapter "ws" : 2.3.5 , installed 2.3.5 Adapter "yahoo-stock-market": 0.0.3, installed 0.0.4 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 26499 States: 24848 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 12933 704/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 15882 707/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 16792 707/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15461 747/sshd: /usr/sbin tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 17037 1551/io.mqtt.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 19963 2037/io.sonoff.0 tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 0 13083 724/vncserver-x11-c tcp 0 0 192.168.178.18:2001 0.0.0.0:* LISTEN 1001 15282 1502/io.hm-rpc.0 tcp6 0 0 ::1:631 :::* LISTEN 0 12932 704/cupsd tcp6 0 0 :::22 :::* LISTEN 0 15463 747/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 15965 1381/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 20801 2110/io.web.0 tcp6 0 0 :::5900 :::* LISTEN 0 13082 724/vncserver-x11-c udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12027 574/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 17462 648/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 15478 754/cups-browsed udp 0 0 0.0.0.0:47890 0.0.0.0:* 108 12029 574/avahi-daemon: r udp 0 0 0.0.0.0:39771 0.0.0.0:* 1001 21697 2305/io.heos.0 udp6 0 0 :::5353 :::* 108 12028 574/avahi-daemon: r udp6 0 0 :::55231 :::* 108 12030 574/avahi-daemon: r udp6 0 0 :::546 :::* 0 17547 648/dhcpcd *** Log File - Last 25 Lines *** 2023-02-25 19:46:15.302 - error: daswetter.0 (10403) Cannot check object existence of "daswetter.0.NextHours.Location_1.Day_3.Hour_16.wind_symbolB": Connection is closed. 2023-02-25 19:46:15.355 - error: host.RPI4 instance system.adapter.daswetter.0 terminated with code 15 (UNKNOWN_ERROR) 2023-02-25 19:46:15.957 - info: niu.0 (2333) State value to set for "niu.0.NA2L4A11702NAXL1.scooter_info.shakingValue" has to be type "number" but received type "string" 2023-02-25 19:46:23.468 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:46:25.622 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:46:25.623 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:46:34.267 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:46:37.631 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:46:37.632 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:46:45.676 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:46:49.637 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:46:49.638 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:46:57.132 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:47:01.646 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:47:01.648 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:47:08.626 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:47:13.658 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:47:13.660 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:47:19.980 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:47:25.669 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:47:25.670 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:47:31.277 - info: smartmeter.0 (1970) Received 10 values, 3 updated 2023-02-25 19:47:37.674 - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request. 2023-02-25 19:47:37.676 - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request. 2023-02-25 19:47:42.717 - info: smartmeter.0 (1970) Received 10 values, 3 updated ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summaryUnd Summary:
======================= SUMMARY ======================= v.2023-01-02 Operatingsystem: Debian GNU/Linux 11 (bullseye) Installation: Native Timezone: Europe/Berlin User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 0 Nodejs-Installation: /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 ioBroker Core: js-controller 4.0.24 admin 6.3.6 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin: + system.adapter.admin.0 : admin : RPI4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin Pending iob updates: 0 Active repo(s): beta Objects: 26499 States: 24848 Size of iob-Database: 33M /opt/iobroker/iobroker-data/objects.jsonl 29M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================@hg6806 sagte in Nach Neuinstallation+Backup RAM läuft langsam voll:
Desktop brauche ich manchmal
Wozu? Auf einem Server braucht man den nie. Alle benötigten Programme werden eh über die Kommandozeile oder ein WebGUI administriert.
Kann man den einfach so bei bedarf ein- und ausschalten?
Ja, kann man natürlich. Dafür gibt es die RunLevel bzw. Boot Targets
Dir ist bewusst, dass du hier mit Kopf und Kragen Beta-Tester bist?
Deine smartmeter.1-Instanz tickt nicht sauber.
Ansonsten seh ich da nicht konkretes. Wird vermutlich in einem Skript was im Argen liegen.
-
@hg6806 sagte in Nach Neuinstallation+Backup RAM läuft langsam voll:
Desktop brauche ich manchmal
Wozu? Auf einem Server braucht man den nie. Alle benötigten Programme werden eh über die Kommandozeile oder ein WebGUI administriert.
Kann man den einfach so bei bedarf ein- und ausschalten?
Ja, kann man natürlich. Dafür gibt es die RunLevel bzw. Boot Targets
Dir ist bewusst, dass du hier mit Kopf und Kragen Beta-Tester bist?
Deine smartmeter.1-Instanz tickt nicht sauber.
Ansonsten seh ich da nicht konkretes. Wird vermutlich in einem Skript was im Argen liegen.
Ich installiere immer die Versionen, die mir angeboten werden.
Man merkt es ja im Prinzip gar nicht, dass es Beta Versionen sind.Smartmeter ist mir bewusst, war aber beim alten System auch schon so. Ich denke das liegt an der Hardware.
Ich hatte jetzt die alte SSD wieder angestöpselt. Es läuft normal und stabil.
Verfügb. RAM liegt immer bei knapp unter 2GB.Ich hatte es im Prinzip nur neu aufgesetzt, weil ich das generell alle par Monate mache, besonders wenn es von Raspberry Pi neue Images gibt.
Vielleicht schaffe ich es nächstes Wochenende nochmal was neu aufzusetzen. Mal sehen ob es wieder das Problem mit verfügbarem RAM gibt.
-
Ich installiere immer die Versionen, die mir angeboten werden.
Man merkt es ja im Prinzip gar nicht, dass es Beta Versionen sind.Smartmeter ist mir bewusst, war aber beim alten System auch schon so. Ich denke das liegt an der Hardware.
Ich hatte jetzt die alte SSD wieder angestöpselt. Es läuft normal und stabil.
Verfügb. RAM liegt immer bei knapp unter 2GB.Ich hatte es im Prinzip nur neu aufgesetzt, weil ich das generell alle par Monate mache, besonders wenn es von Raspberry Pi neue Images gibt.
Vielleicht schaffe ich es nächstes Wochenende nochmal was neu aufzusetzen. Mal sehen ob es wieder das Problem mit verfügbarem RAM gibt.
@hg6806 sagte in Nach Neuinstallation+Backup RAM läuft langsam voll:
Man merkt es ja im Prinzip gar nicht, dass es Beta Versionen sind.
deswegen sollst du ja gar nicht im Beta-Repo drin sein. Dann wird dir auch keine Betaversion angeboten
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden599
Online32.8k
Benutzer82.9k
Themen1.3m
Beiträge