<![CDATA[Nach Neuinstallation+Backup RAM läuft langsam voll]]>Hallo zusammen,

nach meiner gestrigen Neuinstallation des RPi4 und anschließendem Aufspielen des Backups ist mir der Pi die Nacht abgestürzt.
Ich habe gesehen, dass der RAM vollgelaufen ist und auch die eingestellte 2GB Swap.
Das Problem hatte ich vorher gar nicht. Es waren eigentlich immer 2GB nach frei.

Es dauert so grob 6Std. bis der RAM voll ist.

Hier mal ein htop:

e1efaee9-523e-4cb1-bde4-850788b114e1-image.png

und eine Auswertung in VIS:

5d5ac6fc-0206-447e-b4a2-46701864f08b-image.png

Oder liegt es generell an der neuen PI Software?
Raspberry Pi OS with desktop
Release date: February 21st 2023
System: 64-bit
Kernel version: 5.15
Debian version: 11 (bullseye)

Mein ioBroker System ist wie folgt:

Plattform: linux
Betriebssystem: linux
Architektur: arm64
CPUs: 4
Geschwindigkeit: 1500 MHz
Modell: Cortex-A72
RAM: 3.7 GB
System-Betriebszeit: 00:01:45
Node.js: v16.19.1
time: 1677348075708
timeOffset: -60
Adapter-Anzahl: 558
NPM: v8.19.3
Datenträgergröße: 109.7 GB
Freier Festplattenspeicher: 101.0 GB
Betriebszeit: 00:01:57
Aktive Instanzen: 21
Pfad: /opt/iobroker/
aktiv:

Generell ist nach einem Reboot 1GB weniger RAM verfügbar.

Hat jemand eine Idee was das sein könnte?

]]>https://forum.iobroker.net/topic/63366/nach-neuinstallation-backup-ram-läuft-langsam-vollRSS for NodeMon, 11 May 2026 15:42:49 GMTSat, 25 Feb 2023 18:04:07 GMT60<![CDATA[Reply to Nach Neuinstallation+Backup RAM läuft langsam voll on Sun, 26 Feb 2023 08:25:49 GMT]]>@hg6806 sagte in Nach Neuinstallation+Backup RAM läuft langsam voll:

Man merkt es ja im Prinzip gar nicht, dass es Beta Versionen sind.

deswegen sollst du ja gar nicht im Beta-Repo drin sein. Dann wird dir auch keine Betaversion angeboten

]]>https://forum.iobroker.net/post/953985https://forum.iobroker.net/post/953985Sun, 26 Feb 2023 08:25:49 GMT<![CDATA[Reply to Nach Neuinstallation+Backup RAM läuft langsam voll on Sun, 26 Feb 2023 07:53:19 GMT]]>@thomas-braun

Ich installiere immer die Versionen, die mir angeboten werden.
Man merkt es ja im Prinzip gar nicht, dass es Beta Versionen sind.

Smartmeter ist mir bewusst, war aber beim alten System auch schon so. Ich denke das liegt an der Hardware.

Ich hatte jetzt die alte SSD wieder angestöpselt. Es läuft normal und stabil.
Verfügb. RAM liegt immer bei knapp unter 2GB.

Ich hatte es im Prinzip nur neu aufgesetzt, weil ich das generell alle par Monate mache, besonders wenn es von Raspberry Pi neue Images gibt.

Vielleicht schaffe ich es nächstes Wochenende nochmal was neu aufzusetzen. Mal sehen ob es wieder das Problem mit verfügbarem RAM gibt.

]]>https://forum.iobroker.net/post/953975https://forum.iobroker.net/post/953975Sun, 26 Feb 2023 07:53:19 GMT<![CDATA[Reply to Nach Neuinstallation+Backup RAM läuft langsam voll on Sat, 25 Feb 2023 19:00:38 GMT]]>@hg6806 sagte in Nach Neuinstallation+Backup RAM läuft langsam voll:

Desktop brauche ich manchmal

Wozu? Auf einem Server braucht man den nie. Alle benötigten Programme werden eh über die Kommandozeile oder ein WebGUI administriert.

Kann man den einfach so bei bedarf ein- und ausschalten?

Ja, kann man natürlich. Dafür gibt es die RunLevel bzw. Boot Targets

Dir ist bewusst, dass du hier mit Kopf und Kragen Beta-Tester bist?

Deine smartmeter.1-Instanz tickt nicht sauber.

Ansonsten seh ich da nicht konkretes. Wird vermutlich in einem Skript was im Argen liegen.

]]>https://forum.iobroker.net/post/953740https://forum.iobroker.net/post/953740Sat, 25 Feb 2023 19:00:38 GMT<![CDATA[Reply to Nach Neuinstallation+Backup RAM läuft langsam voll on Sat, 25 Feb 2023 18:51:47 GMT]]>@thomas-braun sagte in Nach Neuinstallation+Backup RAM läuft langsam voll:

iob diag

Desktop brauche ich manchmal und hatte schon immer damit funktioniert.
Kann man den einfach so bei Bedarf ein- und ausschalten?

iob diag

Cooler Befehl - kannte ich noch nicht.

Hier die Auswertung:

======== Start marking the full check here =========

Skript v.2023-01-02

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.2
Architecture:   aarch64
Docker:         false
Virtualization: none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 19:46:11 up 46 min,  3 users,  load average: 5.45, 4.61, 3.39
CPU threads: 4

*** Time and Time Zones ***
Sat Feb 25 18:46:11 UTC 2023
Sat Feb 25 19:46:11 CET 2023
CET +0100
Europe/Berlin

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        2.9G        345M         42M        562M        790M
Swap:           2.0G        3.0M        2.0G
Total:          5.8G        2.9G        2.3G

         3793 M total memory
         2885 M used memory
          224 M active memory
         2968 M inactive memory
          345 M free memory
           30 M buffer memory
          531 M swap cache
         1999 M total swap
            3 M used swap
         1996 M free swap

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      110G  8.7G   97G   9% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  1.3M  758M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      255M   31M  225M  12% /boot
tmpfs          tmpfs     380M   20K  380M   1% /run/user/1000

Messages in dmesg:
[Sat Feb 25 18:59:30 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60D smsc95xx.macaddr=E4:5F:01:05:FC:ED vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=5aa1e2fd-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Sat Feb 25 18:59:31 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sat Feb 25 18:59:31 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Sat Feb 25 18:59:33 2023] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G    /var/
176M    /var/lib
167M    /var/cache
160M    /var/cache/apt
127M    /var/log

/opt/iobroker/backups:
44M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.3G    /opt/iobroker/iobroker-data/
664M    /opt/iobroker/iobroker-data/history
491M    /opt/iobroker/iobroker-data/files
78M     /opt/iobroker/iobroker-data/files/icons-open-icon-library-png
51M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/objects.jsonl
33M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map
27M     /opt/iobroker/iobroker-data/states.jsonl
19M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e8e2aac0.js.map
19M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.fe83292c.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v16.19.1
/usr/bin/node           v16.19.1
/usr/bin/npm            8.19.3
/usr/bin/npx            8.19.3

nodejs:
  Installed: 16.19.1-deb-1nodesource1
  Candidate: 16.19.1-deb-1nodesource1
  Version table:
 *** 16.19.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  4.0.24
admin:          6.3.6
javascript:     7.0.1

Adapters from github:   7

Adapter State
+ system.adapter.admin.0                  : admin                 : RPI4                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alarm.0                  : alarm                 : RPI4                                     - disabled
  system.adapter.alias-manager.0          : alias-manager         : RPI4                                     - disabled
+ system.adapter.backitup.0               : backitup              : RPI4                                     -  enabled
+ system.adapter.ble.0                    : ble                   : RPI4                                     -  enabled
+ system.adapter.canbus.0                 : canbus                : RPI4                                     -  enabled
  system.adapter.cloud.0                  : cloud                 : RPI4                                     - disabled
  system.adapter.daswetter.0              : daswetter             : RPI4                                     -  enabled
+ system.adapter.denon.0                  : denon                 : RPI4                                     -  enabled
  system.adapter.device-watcher.0         : device-watcher        : RPI4                                     - disabled
  system.adapter.devices.0                : devices               : RPI4                                     - disabled
  system.adapter.discovery.0              : discovery             : RPI4                                     - disabled
+ system.adapter.email.0                  : email                 : RPI4                                     -  enabled
+ system.adapter.enigma2.0                : enigma2               : RPI4                                     -  enabled
+ system.adapter.eventlist.0              : eventlist             : RPI4                                     -  enabled
  system.adapter.flot.0                   : flot                  : RPI4                                     - disabled
  system.adapter.fullybrowser.0           : fullybrowser          : RPI4                                     - disabled
+ system.adapter.heos.0                   : heos                  : RPI4                                     -  enabled
+ system.adapter.history.0                : history               : RPI4                                     -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : RPI4                                     -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : RPI4                                     -  enabled, port: 0
  system.adapter.ical.0                   : ical                  : RPI4                                     -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : RPI4                                     - disabled
  system.adapter.icons-material-png.0     : icons-material-png    : RPI4                                     - disabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : RPI4                                     - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : RPI4                                     - disabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: RPI4                                     - disabled
  system.adapter.info.0                   : info                  : RPI4                                     - disabled
  system.adapter.iot.0                    : iot                   : RPI4                                     - disabled
+ system.adapter.javascript.0             : javascript            : RPI4                                     -  enabled
+ system.adapter.modbus.0                 : modbus                : RPI4                                     -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : RPI4                                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.1                   : mqtt                  : RPI4                                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.niu.0                    : niu                   : RPI4                                     -  enabled
+ system.adapter.parser.0                 : parser                : RPI4                                     -  enabled
+ system.adapter.ping.0                   : ping                  : RPI4                                     -  enabled
  system.adapter.proxy.0                  : proxy                 : RPI4                                     - disabled
+ system.adapter.psa.0                    : psa                   : RPI4                                     -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : RPI4                                     -  enabled
  system.adapter.rtspstream.0             : rtspstream            : RPI4                                     - disabled, port: 8084
  system.adapter.samsung.0                : samsung               : RPI4                                     - disabled
  system.adapter.samsung_tizen.0          : samsung_tizen         : RPI4                                     - disabled, port: 8002
+ system.adapter.scenes.0                 : scenes                : RPI4                                     -  enabled
+ system.adapter.smartmeter.0             : smartmeter            : RPI4                                     -  enabled
+ system.adapter.smartmeter.1             : smartmeter            : RPI4                                     -  enabled
  system.adapter.smartthings.0            : smartthings           : RPI4                                     - disabled
+ system.adapter.sonoff.0                 : sonoff                : RPI4                                     -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.sourceanalytix.0         : sourceanalytix        : RPI4                                     -  enabled
+ system.adapter.statistics.0             : statistics            : RPI4                                     -  enabled
  system.adapter.sunnyportal.0            : sunnyportal           : RPI4                                     - disabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : RPI4                                     -  enabled
+ system.adapter.telegram.0               : telegram              : RPI4                                     -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.tvspielfilm.0            : tvspielfilm           : RPI4                                     -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : RPI4                                     - disabled
  system.adapter.vis-google-fonts.0       : vis-google-fonts      : RPI4                                     - disabled
  system.adapter.vis-history.0            : vis-history           : RPI4                                     - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : RPI4                                     - disabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : RPI4                                     - disabled
  system.adapter.vis-map.0                : vis-map               : RPI4                                     - disabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : RPI4                                     - disabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : RPI4                                     - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : RPI4                                     - disabled
  system.adapter.vis.0                    : vis                   : RPI4                                     -  enabled
  system.adapter.vr200.0                  : vr200                 : RPI4                                     - disabled
+ system.adapter.web.0                    : web                   : RPI4                                     -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wireless-mbus.0          : wireless-mbus         : RPI4                                     -  enabled
  system.adapter.wlanthermo-nano.0        : wlanthermo-nano       : RPI4                                     - disabled
  system.adapter.wled.0                   : wled                  : RPI4                                     - disabled
+ system.adapter.worx.0                   : worx                  : RPI4                                     -  enabled
+ system.adapter.yahoo-stock-market.0     : yahoo-stock-market    : RPI4                                     -  enabled
+ system.adapter.zigbee.0                 : zigbee                : RPI4                                     -  enabled, port: /dev/ttyUSB2

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : RPI4                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : RPI4                                     -  enabled, port: 0
+ system.adapter.mqtt.0                   : mqtt                  : RPI4                                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.1                   : mqtt                  : RPI4                                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : RPI4                                     -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : RPI4                                     -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : RPI4                                     -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : RPI4                                     -  enabled, port: /dev/ttyUSB2

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter    "admin"        : 6.3.6    , installed 6.3.6
Adapter    "alarm"        : 3.3.9    , installed 3.3.9
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "backitup"     : 2.6.3    , installed 2.6.3
Adapter    "ble"          : 0.13.3   , installed 0.13.3
Adapter    "canbus"       : 1.3.1    , installed 1.3.1
Adapter    "cloud"        : 4.3.1    , installed 4.3.1
Adapter    "daswetter"    : 3.1.7    , installed 3.1.7
Adapter    "denon"        : 1.15.0   , installed 1.15.0
Adapter    "device-watcher": 2.6.0   , installed 2.6.0
Adapter    "devices"      : 1.1.2    , installed 1.1.2
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "email"        : 1.1.4    , installed 1.1.4
Adapter    "eventlist"    : 1.2.2    , installed 1.2.2
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fullybrowser" : 2.1.2    , installed 2.1.2
Adapter    "heos"         : 1.12.0   , installed 1.12.0
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hm-rega"      : 3.0.44   , installed 3.0.44
Adapter    "hm-rpc"       : 1.15.16  , installed 1.15.16
Adapter    "ical"         : 1.13.2   , installed 1.13.2
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.3
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "iot"          : 1.14.3   , installed 1.14.3
Adapter    "javascript"   : 7.0.1    , installed 7.0.1
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "modbus"       : 5.0.11   , installed 5.0.11
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "niu"          : 0.0.3    , installed 0.0.3
Adapter    "parser"       : 1.3.2    , installed 1.3.2
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "proxy"        : 1.3.2    , installed 1.3.2
Adapter    "psa"          : 0.0.11   , installed 0.0.11
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "samsung"      : 0.5.11   , installed 0.5.11
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "smartthings"  : 0.0.4    , installed 0.0.4
Adapter    "socketio"     : 6.3.3    , installed 6.3.3
Adapter    "sonoff"       : 2.5.1    , installed 2.5.1
Adapter    "sourceanalytix": 0.4.14  , installed 0.4.14
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.15.6   , installed 1.15.6
Adapter    "tvspielfilm"  : 2.0.5    , installed 2.0.5
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-colorpicker": 1.2.0  , installed 1.2.0
Adapter    "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.3.1    , installed 1.3.1
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-map"      : 1.0.4    , installed 1.0.4
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.86
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vr200"        : 1.0.0    , installed 1.1.0
Adapter    "web"          : 5.5.1    , installed 5.5.1
Adapter    "wireless-mbus": 0.8.8    , installed 0.8.8
Adapter    "wlanthermo-nano": 0.2.1  , installed 0.2.1
Adapter    "wled"         : 0.6.7    , installed 0.6.7
Adapter    "worx"         : 2.0.3    , installed 2.0.3
Adapter    "ws"           : 2.3.5    , installed 2.3.5
Adapter    "yahoo-stock-market": 0.0.3, installed 0.0.4
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        26499
States:         24848

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:4 http://deb.debian.org/debian bullseye-updates InRelease
Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          12933      704/cupsd
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       15882      707/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       16792      707/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          15461      747/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       17037      1551/io.mqtt.0
tcp        0      0 0.0.0.0:1885            0.0.0.0:*               LISTEN      1001       19963      2037/io.sonoff.0
tcp        0      0 0.0.0.0:5900            0.0.0.0:*               LISTEN      0          13083      724/vncserver-x11-c
tcp        0      0 192.168.178.18:2001     0.0.0.0:*               LISTEN      1001       15282      1502/io.hm-rpc.0
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          12932      704/cupsd
tcp6       0      0 :::22                   :::*                    LISTEN      0          15463      747/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15965      1381/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       20801      2110/io.web.0
tcp6       0      0 :::5900                 :::*                    LISTEN      0          13082      724/vncserver-x11-c
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12027      574/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          17462      648/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          15478      754/cups-browsed
udp        0      0 0.0.0.0:47890           0.0.0.0:*                           108        12029      574/avahi-daemon: r
udp        0      0 0.0.0.0:39771           0.0.0.0:*                           1001       21697      2305/io.heos.0
udp6       0      0 :::5353                 :::*                                108        12028      574/avahi-daemon: r
udp6       0      0 :::55231                :::*                                108        12030      574/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          17547      648/dhcpcd

*** Log File - Last 25 Lines ***

2023-02-25 19:46:15.302  - error: daswetter.0 (10403) Cannot check object existence of "daswetter.0.NextHours.Location_1.Day_3.Hour_16.wind_symbolB": Connection is closed.
2023-02-25 19:46:15.355  - error: host.RPI4 instance system.adapter.daswetter.0 terminated with code 15 (UNKNOWN_ERROR)
2023-02-25 19:46:15.957  - info: niu.0 (2333) State value to set for "niu.0.NA2L4A11702NAXL1.scooter_info.shakingValue" has to be type "number" but received type "string"
2023-02-25 19:46:23.468  - info: smartmeter.0 (1970) Received 10 values, 3 updated
2023-02-25 19:46:25.622  - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request.
2023-02-25 19:46:25.623  - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request.
2023-02-25 19:46:34.267  - info: smartmeter.0 (1970) Received 10 values, 3 updated
2023-02-25 19:46:37.631  - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request.
2023-02-25 19:46:37.632  - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request.
2023-02-25 19:46:45.676  - info: smartmeter.0 (1970) Received 10 values, 3 updated
2023-02-25 19:46:49.637  - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request.
2023-02-25 19:46:49.638  - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request.
2023-02-25 19:46:57.132  - info: smartmeter.0 (1970) Received 10 values, 3 updated
2023-02-25 19:47:01.646  - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request.
2023-02-25 19:47:01.648  - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request.
2023-02-25 19:47:08.626  - info: smartmeter.0 (1970) Received 10 values, 3 updated
2023-02-25 19:47:13.658  - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request.
2023-02-25 19:47:13.660  - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request.
2023-02-25 19:47:19.980  - info: smartmeter.0 (1970) Received 10 values, 3 updated
2023-02-25 19:47:25.669  - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request.
2023-02-25 19:47:25.670  - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request.
2023-02-25 19:47:31.277  - info: smartmeter.0 (1970) Received 10 values, 3 updated
2023-02-25 19:47:37.674  - info: smartmeter.1 (2021) Error: No or too long answer from Serial Device after last request.
2023-02-25 19:47:37.676  - warn: smartmeter.1 (2021) No or too long answer from Serial Device after last request.
2023-02-25 19:47:42.717  - info: smartmeter.0 (1970) Received 10 values, 3 updated



============ Mark until here for C&P =============

iob diag has finished.


Press any key for a summary

Und Summary:

======================= SUMMARY =======================
                     v.2023-01-02


Operatingsystem:        Debian GNU/Linux 11 (bullseye)
Installation:           Native
Timezone:               Europe/Berlin
User-ID:                1000
X-Server:               true
Boot Target:            graphical.target

Pending OS-Updates:     0

Nodejs-Installation:    /usr/bin/nodejs         v16.19.1
                        /usr/bin/node           v16.19.1
                        /usr/bin/npm            8.19.3
                        /usr/bin/npx            8.19.3

ioBroker Core:          js-controller           4.0.24
                        admin                   6.3.6

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin:
+ system.adapter.admin.0                  : admin                 : RPI4                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

Pending iob updates:    0

Active repo(s): beta

Objects:                26499
States:                 24848

Size of iob-Database:

33M     /opt/iobroker/iobroker-data/objects.jsonl
29M     /opt/iobroker/iobroker-data/states.jsonl


=================== END OF SUMMARY ====================
]]>https://forum.iobroker.net/post/953736https://forum.iobroker.net/post/953736Sat, 25 Feb 2023 18:51:47 GMT<![CDATA[Reply to Nach Neuinstallation+Backup RAM läuft langsam voll on Sat, 25 Feb 2023 18:17:52 GMT]]>@hg6806

Raspberry Pi OS with desktop

Ausschalten.

iob diag

sagt?

]]>https://forum.iobroker.net/post/953727https://forum.iobroker.net/post/953727Sat, 25 Feb 2023 18:17:52 GMT