NEWS
[neuer Adapter] smartgarden adapter for Gardena smart system
-
zuerst: blöde Fragen gibt's nicht
hab mal ein Bild gemalt --- Malen nach Zahlen, hoffe du kommst klar :-)
VG jpgorganizerDanke dir,da wäre ich ja nie drauf gekommen.
-
Hallo liebe ioBroker Gemeinde,
da Gardena in 2019 eine Websocket Schnittstelle für die Smart Geräte wie Mähroboter, Bewässerungsanlage (smart irrigation control) veröffentlicht hat und es m.W. noch keinen Adapter dafür gibt, habe ich in den vergangenen Wochen einen Adapter dafür entwickelt.
Ich bitte euch nun diesen zu testen. Für Fragen, Fehler etc. bitte diesen Thread nutzen. Ich werde versuchen die Fragen zu beantworten und auch Fehler zu beheben.
Der Adapter liegt in github unter https://github.com/jpgorganizer/ioBroker.smartgarden.
Viele Grüße
jpgorganizerMoin zusammen,
hab' nur ich ein Problem seit 1-2 Tagen mit der Verbindung zu Gardena oder basteln die gerade in der Winterpause? Kann den Fehler nicht so wirklich einordnen...
Edit: Hmmm, scheinbar habe ich zu viele Requests geschickt, allerdings habe ich die letzten Wochen nicht wirklich was verändert. Eher Geräte in den Winterschlaf versetzt, die jetzt keine Aktionen mehr auslösen sollten?!smartgarden.0 2021-12-19 23:41:30.316 info 2/ getConnection: trying to connect again in 300 seconds smartgarden.0 2021-12-19 23:41:30.316 info 2/ getConnection: returned connection error: request returned 429 smartgarden.0 2021-12-19 23:41:30.314 error Error: request returned 429 smartgarden.0 2021-12-19 23:41:30.312 info 2/ get_locations failure:..return with error smartgarden.0 2021-12-19 23:41:30.311 info 2/ get_locations failure: response.statusCode/Message=429/ smartgarden.0 2021-12-19 23:41:30.114 info 2/ get_locations ... smartgarden.0 2021-12-19 23:41:30.112 info 2/ connected ... auth_data=eyJhXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXX smartgarden.0 2021-12-19 23:41:30.110 info 2/ Connection: expires_in/timeout/factor:86399 / 86485 / 1.001 smartgarden.0 2021-12-19 23:41:30.107 info 2/ Connection: successful: response.statusCode / statusMessage=200 / OK smartgarden.0 2021-12-19 23:41:28.311 info 2/ Gardena Smart System Service hosts at: smart_host: https://api.smart.gardena.dev authentication_host: https://api.authentication.husqvarnagroup.dev smartgarden.0 2021-12-19 23:41:28.309 info 2/ connecting to Gardena Smart System Service ... smartgarden.0 2021-12-19 23:41:28.305 info 2/ connectToGardena... smartgarden.0 2021-12-19 23:41:28.302 info 2/ getConnection... smartgarden.0 2021-12-19 23:41:28.046 info starting. Version 1.0.5 in /opt/iobroker/node_modules/iobroker.smartgarden, node: v14.18.2, js-controller: 3.3.21 smartgarden.0 2021-12-19 23:41:10.772 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason smartgarden.0 2021-12-19 23:41:10.770 info terminating smartgarden.0 2021-12-19 23:41:10.769 info 2/ cleaned everything up... smartgarden.0 2021-12-19 23:41:10.766 info Got terminate signal TERMINATE_YOURSELF smartgarden.0 2021-12-19 23:40:00.035 error Error: sendCommand: command not send, because not connected to Gardena Webservice -
Moin zusammen,
hab' nur ich ein Problem seit 1-2 Tagen mit der Verbindung zu Gardena oder basteln die gerade in der Winterpause? Kann den Fehler nicht so wirklich einordnen...
Edit: Hmmm, scheinbar habe ich zu viele Requests geschickt, allerdings habe ich die letzten Wochen nicht wirklich was verändert. Eher Geräte in den Winterschlaf versetzt, die jetzt keine Aktionen mehr auslösen sollten?!smartgarden.0 2021-12-19 23:41:30.316 info 2/ getConnection: trying to connect again in 300 seconds smartgarden.0 2021-12-19 23:41:30.316 info 2/ getConnection: returned connection error: request returned 429 smartgarden.0 2021-12-19 23:41:30.314 error Error: request returned 429 smartgarden.0 2021-12-19 23:41:30.312 info 2/ get_locations failure:..return with error smartgarden.0 2021-12-19 23:41:30.311 info 2/ get_locations failure: response.statusCode/Message=429/ smartgarden.0 2021-12-19 23:41:30.114 info 2/ get_locations ... smartgarden.0 2021-12-19 23:41:30.112 info 2/ connected ... auth_data=eyJhXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXX smartgarden.0 2021-12-19 23:41:30.110 info 2/ Connection: expires_in/timeout/factor:86399 / 86485 / 1.001 smartgarden.0 2021-12-19 23:41:30.107 info 2/ Connection: successful: response.statusCode / statusMessage=200 / OK smartgarden.0 2021-12-19 23:41:28.311 info 2/ Gardena Smart System Service hosts at: smart_host: https://api.smart.gardena.dev authentication_host: https://api.authentication.husqvarnagroup.dev smartgarden.0 2021-12-19 23:41:28.309 info 2/ connecting to Gardena Smart System Service ... smartgarden.0 2021-12-19 23:41:28.305 info 2/ connectToGardena... smartgarden.0 2021-12-19 23:41:28.302 info 2/ getConnection... smartgarden.0 2021-12-19 23:41:28.046 info starting. Version 1.0.5 in /opt/iobroker/node_modules/iobroker.smartgarden, node: v14.18.2, js-controller: 3.3.21 smartgarden.0 2021-12-19 23:41:10.772 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason smartgarden.0 2021-12-19 23:41:10.770 info terminating smartgarden.0 2021-12-19 23:41:10.769 info 2/ cleaned everything up... smartgarden.0 2021-12-19 23:41:10.766 info Got terminate signal TERMINATE_YOURSELF smartgarden.0 2021-12-19 23:40:00.035 error Error: sendCommand: command not send, because not connected to Gardena Webservice2021-12-19 23:41:10.772 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reasonirgendwas stoppt deinen Adapter
schalte mal Loglevel auf 3 in den Adapter-Einstellungen
VG jpgorganizer
-
2021-12-19 23:41:10.772 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reasonirgendwas stoppt deinen Adapter
schalte mal Loglevel auf 3 in den Adapter-Einstellungen
VG jpgorganizer
@jpgorganizer Loglevel 3 = DEBUG?
Ich hatte gestern Node.js und js-controller upgedatet. Aber ich meine das Problem bestand schon vorher...
Edit: Ich glaub' aber das ist ein Fehlalarm mit dem Terminieren. Ich hatte zuvor halt mal versucht den Adapter zu restarten über das entsprechende Symbol. Ich glaube das hat nichts zu bedeuten...wird auch ausgegeben, wenn ich den Loglevel ändere, weil der Adapter dann neu startet.
Edit2: Ja, mit SILLY bekomme ich eine riesige Liste mit den Zugriffszahlen seit Oktober 2020. Da werden für die letzten 31 Tage ziemlich viele Zugriffe angezeigt, warum auch immer. Wo lag gleich die Grenze?
Fehler 429 würde auch passen, das HTTP-Code 429 = Too Many Requests.{\"count\":24},\"09\":{\"count\":24}},\"2021-12-20\":{\"count\":14,\"00\":{\"count\":14}}}},\"last30days\":{\"count\":4689},\"last31days\":{\"count\":4691}}Edit3: Hat sich bestätigt. Ich hatte im Frühjahr/Sommer das Problem schonmal und daraufhin alle Skripte umgestellt um Abfragen zu reduzieren. Leider habe ich dabei das eine Skript übersehen, das im Teich den Eisfreihalter steuert (mit ner Gardena-Steckdose). Das ist das einzige Gardena-Winterskript. ;-) Und da wird noch alle 5 min stur der Ein- oder Ausschalten-Befehl geschickt...
Somit ist das geklärt. Den Counter kann ich nur zurücksetzen, indem ich mir den "Zugang" (was genau?) neu generiere? Oder bekomme ich am nächsten Tag schon wieder ein kleines "Zugriffsguthaben"? Oder erst nach 31 Tagen?smartgarden.0 2021-12-20 01:26:40.809 info 2/ getConnection: trying to connect again in 300 seconds smartgarden.0 2021-12-20 01:26:40.808 info 2/ getConnection: returned connection error: request returned 429 smartgarden.0 2021-12-20 01:26:40.806 error Error: request returned 429 smartgarden.0 2021-12-20 01:26:40.805 info 2/ get_locations failure:..return with error smartgarden.0 2021-12-20 01:26:40.803 info 2/ get_locations failure: response.statusCode/Message=429/ smartgarden.0 2021-12-20 01:26:40.571 info 2/ get_locations ... smartgarden.0 2021-12-20 01:26:40.569 info 2/ connected ... auth_data=eyJhXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX--XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX smartgarden.0 2021-12-20 01:26:40.566 info 2/ Connection: expires_in/timeout/factor:86399 / 86485 / 1.001 smartgarden.0 2021-12-20 01:26:40.564 info 2/ Connection: successful: response.statusCode / statusMessage=200 / OK smartgarden.0 2021-12-20 01:26:40.050 info 2/ Gardena Smart System Service hosts at: smart_host: https://api.smart.gardena.dev authentication_host: https://api.authentication.husqvarnagroup.dev smartgarden.0 2021-12-20 01:26:40.049 info 2/ connecting to Gardena Smart System Service ... smartgarden.0 2021-12-20 01:26:40.039 info 2/ connectToGardena... smartgarden.0 2021-12-20 01:26:40.037 info 2/ getConnection... smartgarden.0 2021-12-20 01:26:39.707 info starting. Version 1.0.5 in /opt/iobroker/node_modules/iobroker.smartgarden, node: v14.18.2, js-controller: 3.3.21 smartgarden.0 2021-12-20 01:26:39.133 debug statesDB connected smartgarden.0 2021-12-20 01:26:39.131 debug States connected to redis: 127.0.0.1:9000 smartgarden.0 2021-12-20 01:26:39.106 debug States create User PubSub Client smartgarden.0 2021-12-20 01:26:39.104 debug States create System PubSub Client smartgarden.0 2021-12-20 01:26:39.074 debug Redis States: Use Redis connection: 127.0.0.1:9000 smartgarden.0 2021-12-20 01:26:39.067 debug objectDB connected smartgarden.0 2021-12-20 01:26:39.046 debug Objects connected to redis: 127.0.0.1:9001 smartgarden.0 2021-12-20 01:26:38.960 debug Objects client initialize lua scripts smartgarden.0 2021-12-20 01:26:38.957 debug Objects create User PubSub Client smartgarden.0 2021-12-20 01:26:38.951 debug Objects create System PubSub Client smartgarden.0 2021-12-20 01:26:38.931 debug Objects client ready ... initialize now smartgarden.0 2021-12-20 01:26:38.733 debug Redis Objects: Use Redis connection: 127.0.0.1:9001 smartgarden.0 2021-12-20 01:26:32.156 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason smartgarden.0 2021-12-20 01:26:32.154 info terminating smartgarden.0 2021-12-20 01:26:32.152 info 2/ cleaned everything up... smartgarden.0 2021-12-20 01:26:32.150 info Got terminate signal TERMINATE_YOURSELF -
@jpgorganizer Loglevel 3 = DEBUG?
Ich hatte gestern Node.js und js-controller upgedatet. Aber ich meine das Problem bestand schon vorher...
Edit: Ich glaub' aber das ist ein Fehlalarm mit dem Terminieren. Ich hatte zuvor halt mal versucht den Adapter zu restarten über das entsprechende Symbol. Ich glaube das hat nichts zu bedeuten...wird auch ausgegeben, wenn ich den Loglevel ändere, weil der Adapter dann neu startet.
Edit2: Ja, mit SILLY bekomme ich eine riesige Liste mit den Zugriffszahlen seit Oktober 2020. Da werden für die letzten 31 Tage ziemlich viele Zugriffe angezeigt, warum auch immer. Wo lag gleich die Grenze?
Fehler 429 würde auch passen, das HTTP-Code 429 = Too Many Requests.{\"count\":24},\"09\":{\"count\":24}},\"2021-12-20\":{\"count\":14,\"00\":{\"count\":14}}}},\"last30days\":{\"count\":4689},\"last31days\":{\"count\":4691}}Edit3: Hat sich bestätigt. Ich hatte im Frühjahr/Sommer das Problem schonmal und daraufhin alle Skripte umgestellt um Abfragen zu reduzieren. Leider habe ich dabei das eine Skript übersehen, das im Teich den Eisfreihalter steuert (mit ner Gardena-Steckdose). Das ist das einzige Gardena-Winterskript. ;-) Und da wird noch alle 5 min stur der Ein- oder Ausschalten-Befehl geschickt...
Somit ist das geklärt. Den Counter kann ich nur zurücksetzen, indem ich mir den "Zugang" (was genau?) neu generiere? Oder bekomme ich am nächsten Tag schon wieder ein kleines "Zugriffsguthaben"? Oder erst nach 31 Tagen?smartgarden.0 2021-12-20 01:26:40.809 info 2/ getConnection: trying to connect again in 300 seconds smartgarden.0 2021-12-20 01:26:40.808 info 2/ getConnection: returned connection error: request returned 429 smartgarden.0 2021-12-20 01:26:40.806 error Error: request returned 429 smartgarden.0 2021-12-20 01:26:40.805 info 2/ get_locations failure:..return with error smartgarden.0 2021-12-20 01:26:40.803 info 2/ get_locations failure: response.statusCode/Message=429/ smartgarden.0 2021-12-20 01:26:40.571 info 2/ get_locations ... smartgarden.0 2021-12-20 01:26:40.569 info 2/ connected ... auth_data=eyJhXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX--XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX smartgarden.0 2021-12-20 01:26:40.566 info 2/ Connection: expires_in/timeout/factor:86399 / 86485 / 1.001 smartgarden.0 2021-12-20 01:26:40.564 info 2/ Connection: successful: response.statusCode / statusMessage=200 / OK smartgarden.0 2021-12-20 01:26:40.050 info 2/ Gardena Smart System Service hosts at: smart_host: https://api.smart.gardena.dev authentication_host: https://api.authentication.husqvarnagroup.dev smartgarden.0 2021-12-20 01:26:40.049 info 2/ connecting to Gardena Smart System Service ... smartgarden.0 2021-12-20 01:26:40.039 info 2/ connectToGardena... smartgarden.0 2021-12-20 01:26:40.037 info 2/ getConnection... smartgarden.0 2021-12-20 01:26:39.707 info starting. Version 1.0.5 in /opt/iobroker/node_modules/iobroker.smartgarden, node: v14.18.2, js-controller: 3.3.21 smartgarden.0 2021-12-20 01:26:39.133 debug statesDB connected smartgarden.0 2021-12-20 01:26:39.131 debug States connected to redis: 127.0.0.1:9000 smartgarden.0 2021-12-20 01:26:39.106 debug States create User PubSub Client smartgarden.0 2021-12-20 01:26:39.104 debug States create System PubSub Client smartgarden.0 2021-12-20 01:26:39.074 debug Redis States: Use Redis connection: 127.0.0.1:9000 smartgarden.0 2021-12-20 01:26:39.067 debug objectDB connected smartgarden.0 2021-12-20 01:26:39.046 debug Objects connected to redis: 127.0.0.1:9001 smartgarden.0 2021-12-20 01:26:38.960 debug Objects client initialize lua scripts smartgarden.0 2021-12-20 01:26:38.957 debug Objects create User PubSub Client smartgarden.0 2021-12-20 01:26:38.951 debug Objects create System PubSub Client smartgarden.0 2021-12-20 01:26:38.931 debug Objects client ready ... initialize now smartgarden.0 2021-12-20 01:26:38.733 debug Redis Objects: Use Redis connection: 127.0.0.1:9001 smartgarden.0 2021-12-20 01:26:32.156 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason smartgarden.0 2021-12-20 01:26:32.154 info terminating smartgarden.0 2021-12-20 01:26:32.152 info 2/ cleaned everything up... smartgarden.0 2021-12-20 01:26:32.150 info Got terminate signal TERMINATE_YOURSELFHallo zusammen,
ich habe in der Nacht vom 16.12. auf 17.12. gemerkt, dass plötzlich nur noch "Bad Request" (400) gekommen ist. Erst dachte ich, ich hätte bei meinen Tests, weitere Datenpunkte abzufragen, etwas versemmelt oder zu oft das falsche Secret angegeben.
Eingrenzen kann ich das insofern, dass es bis ca. 23:30 Uhr noch funktionierte und ab ca. 1:00 Uhr nicht mehr.
Als erstes habe ich den Key revoked und erneuert. Kein Erfolg. Dann dachte ich, vielleicht ist die Plattform wegen Wartungsarbeiten down. Als das am Freitag Morgen immer noch nicht lief, kontaktierte ich den Support und von da kam die Empfehlung das Gerät komplett zu löschen und neu anzulegen. Das klappte aber auch nicht.
Wenn man das automatisch erzeugte Testkommando mit dem korrekten Secret in einer CMD startete, kam ebenso der Fehler, wie auch im SWAGGER-Bereich.
Ich habe ein neues Konto mit einer anderen meiner E-Mailadressen angelegt und nur die Authentication aktiviert, um auszuschließen, dass wegen der ganzen Tests was blockiert wurde. Auch beim neuen Account das gleiche Bild.
Leider ist der Supporter seit dem WE in Urlaub und seine Kollegen antworten nicht. Auch ein Anruf mit zig Weiterleitungen und dem Versprechen, man sucht einen Vertreter, war bisher erfolglos.
Edit 2:
Es funktioniert wieder. Ich habe nochmal alle Passwörter geändert, auch in der Gardena-App. So richtig erklären kann ich es nicht, aber seitdem ist alles wieder grün und lässt sich auch steuern.Grüße,
Stefan -
@stevie77 sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Oder bekomme ich am nächsten Tag schon wieder ein kleines "Zugriffsguthaben"? Oder erst nach 31 Tagen?
das ist eine BucketList, da hast du 3000 Abfragen pro Monat und durchschnittlich darfst du nicht mehr wie eine Abfrage pro 15 min haben.
Ich vermute, dass alle 15 Minuten ein Token in die BucketList gelegt wird (bis max. 3000 Token) und für jede Abfrage geht ein Token wieder raus. Wenn die BucketListe leer ist, dann geht halt nichts mehr.
Für die, die es interessiert, die können gerne bei AWS nachlesen, wie es genau funktioniert. :-)VG jpgorganizer
noch schöne Weihnachten für euch -
@stefana-0 sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Wenn man das automatisch erzeugte Testkommando mit dem korrekten Secret in einer CMD startete, kam ebenso der Fehler, wie auch im SWAGGER-Bereich.
für das nächste Mal:
hier kann man zum Test alternativ auch das Python Test Script nehmen ... ist manchmal einfacher wie das Swagger .....
https://github.com/jpgorganizer/test4smartgarden/tree/master/apitestscriptAber jetzt geht's ja wieder.
Viele Grüße jpgorganizer
Frohe Weihnachten -
@stefana-0 sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Wenn man das automatisch erzeugte Testkommando mit dem korrekten Secret in einer CMD startete, kam ebenso der Fehler, wie auch im SWAGGER-Bereich.
für das nächste Mal:
hier kann man zum Test alternativ auch das Python Test Script nehmen ... ist manchmal einfacher wie das Swagger .....
https://github.com/jpgorganizer/test4smartgarden/tree/master/apitestscriptAber jetzt geht's ja wieder.
Viele Grüße jpgorganizer
Frohe WeihnachtenHallo Zusammen,
hatte das ganze letzte Jahr den Adapter ganz gut am Laufen, bis auf die ca alle 3 Monate nervige Key Änderung. (Ist das jetzt gelöst?)
Aktuell hab ich allerdings seltsame Probleme, der Adapter läuft ganz normal an:
smartgarden.0 2022-04-04 09:49:35.827 info 2/ parseMessage: COMMON found smartgarden.0 2022-04-04 09:49:35.797 info 2/ parseMessage: MOWER found smartgarden.0 2022-04-04 09:49:35.763 info 2/ parseMessage: COMMON found smartgarden.0 2022-04-04 09:49:35.746 info 2/ parseMessage: SENSOR found smartgarden.0 2022-04-04 09:49:35.716 info 2/ parseMessage: COMMON found smartgarden.0 2022-04-04 09:49:35.703 info 2/ parseMessage: SENSOR found smartgarden.0 2022-04-04 09:49:35.699 info 2/ parseMessage: DEVICE found smartgarden.0 2022-04-04 09:49:35.693 info 2/ parseMessage: DEVICE found smartgarden.0 2022-04-04 09:49:35.687 info 2/ parseMessage: DEVICE found smartgarden.0 2022-04-04 09:49:35.680 info 2/ parseMessage: LOCATION found smartgarden.0 2022-04-04 09:49:35.344 info 2/ on_open: ### connected ### smartgarden.0 2022-04-04 09:49:35.132 info 2/ get_websocket ... websocket ok smartgarden.0 2022-04-04 09:49:35.121 info 2/ get_websocket successful: response.statusCode/Message=201/Created smartgarden.0 2022-04-04 09:49:35.011 info 2/ get_websocket ... smartgarden.0 2022-04-04 09:49:35.010 info 2/ get_locations ... locations={"data":[{"id":"b86717d4-8633-4241-9686-e64473790757","type":"LOCATION","attributes":{"name":"My Garden"}}]} smartgarden.0 2022-04-04 09:49:35.009 info 2/ get_locations: successful / response.statusMessage: OK smartgarden.0 2022-04-04 09:49:34.792 info 2/ get_locations ... smartgarden.0 2022-04-04 09:49:34.790 info 2/ connected ... auth_data=eyJhXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX smartgarden.0 2022-04-04 09:49:34.788 info 2/ Connection: expires_in/timeout/factor:86399 / 86485 / 1.001 smartgarden.0 2022-04-04 09:49:34.788 info 2/ Connection: successful: response.statusCode / statusMessage=200 / OK smartgarden.0 2022-04-04 09:49:34.291 info 2/ Gardena Smart System Service hosts at: smart_host: https://api.smart.gardena.dev authentication_host: https://api.authentication.husqvarnagroup.dev smartgarden.0 2022-04-04 09:49:34.290 info 2/ connecting to Gardena Smart System Service ... smartgarden.0 2022-04-04 09:49:34.288 info 2/ connectToGardena... smartgarden.0 2022-04-04 09:49:34.286 info 2/ getConnection... smartgarden.0 2022-04-04 09:49:34.204 info starting. Version 1.0.5 in C:/Program Files/iobroker/SmartHome/node_modules/iobroker.smartgarden, node: v14.18.0, js-controller: 4.0.21 smartgarden.0 2022-04-04 09:49:33.762 debug States connected to redis: 127.0.0.1:9010 smartgarden.0 2022-04-04 09:49:33.703 debug States create User PubSub Client smartgarden.0 2022-04-04 09:49:33.702 debug States create System PubSub Client smartgarden.0 2022-04-04 09:49:33.664 debug Redis States: Use Redis connection: 127.0.0.1:9010 smartgarden.0 2022-04-04 09:49:33.599 debug Objects connected to redis: 127.0.0.1:9011 smartgarden.0 2022-04-04 09:49:33.581 debug Objects client initialize lua scripts smartgarden.0 2022-04-04 09:49:33.452 debug Objects create User PubSub Client smartgarden.0 2022-04-04 09:49:33.450 debug Objects create System PubSub Client smartgarden.0 2022-04-04 09:49:33.447 debug Objects client ready ... initialize now smartgarden.0 2022-04-04 09:49:33.321 debug Redis Objects: Use Redis connection: 127.0.0.1:9011 smartgarden.0 2022-04-04 09:49:23.184 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason smartgarden.0 2022-04-04 09:49:23.182 info terminating smartgarden.0 2022-04-04 09:49:23.181 info 3/ cleaned everything up... smartgarden.0 2022-04-04 09:49:23.152 info Got terminate signal TERMINATE_YOURSELFAber nach wenigen Stunden trennt er sich von selber, warum?:
smartgarden.0 2022-04-04 12:04:05.516 info 2/ on_close: ### closed ### close.code=1001 close.reason=Going away smartgarden.0 2022-04-04 12:00:46.038 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:57:26.034 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:54:06.031 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:50:46.019 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:50:38.102 info 2/ setServiceStates: relationship searching smartgarden.0 2022-04-04 11:50:38.101 info 2/ parseMessage: COMMON found smartgarden.0 2022-04-04 11:50:38.088 info 2/ setServiceStates: relationship searching smartgarden.0 2022-04-04 11:50:38.088 info 2/ parseMessage: MOWER found smartgarden.0 2022-04-04 11:47:26.007 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:44:05.983 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:40:45.977 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:37:25.977 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:34:05.963 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:30:45.959 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:27:25.949 info 2/ on_pong: ++ pong'ed ++
-
Hallo Zusammen,
hatte das ganze letzte Jahr den Adapter ganz gut am Laufen, bis auf die ca alle 3 Monate nervige Key Änderung. (Ist das jetzt gelöst?)
Aktuell hab ich allerdings seltsame Probleme, der Adapter läuft ganz normal an:
smartgarden.0 2022-04-04 09:49:35.827 info 2/ parseMessage: COMMON found smartgarden.0 2022-04-04 09:49:35.797 info 2/ parseMessage: MOWER found smartgarden.0 2022-04-04 09:49:35.763 info 2/ parseMessage: COMMON found smartgarden.0 2022-04-04 09:49:35.746 info 2/ parseMessage: SENSOR found smartgarden.0 2022-04-04 09:49:35.716 info 2/ parseMessage: COMMON found smartgarden.0 2022-04-04 09:49:35.703 info 2/ parseMessage: SENSOR found smartgarden.0 2022-04-04 09:49:35.699 info 2/ parseMessage: DEVICE found smartgarden.0 2022-04-04 09:49:35.693 info 2/ parseMessage: DEVICE found smartgarden.0 2022-04-04 09:49:35.687 info 2/ parseMessage: DEVICE found smartgarden.0 2022-04-04 09:49:35.680 info 2/ parseMessage: LOCATION found smartgarden.0 2022-04-04 09:49:35.344 info 2/ on_open: ### connected ### smartgarden.0 2022-04-04 09:49:35.132 info 2/ get_websocket ... websocket ok smartgarden.0 2022-04-04 09:49:35.121 info 2/ get_websocket successful: response.statusCode/Message=201/Created smartgarden.0 2022-04-04 09:49:35.011 info 2/ get_websocket ... smartgarden.0 2022-04-04 09:49:35.010 info 2/ get_locations ... locations={"data":[{"id":"b86717d4-8633-4241-9686-e64473790757","type":"LOCATION","attributes":{"name":"My Garden"}}]} smartgarden.0 2022-04-04 09:49:35.009 info 2/ get_locations: successful / response.statusMessage: OK smartgarden.0 2022-04-04 09:49:34.792 info 2/ get_locations ... smartgarden.0 2022-04-04 09:49:34.790 info 2/ connected ... auth_data=eyJhXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX smartgarden.0 2022-04-04 09:49:34.788 info 2/ Connection: expires_in/timeout/factor:86399 / 86485 / 1.001 smartgarden.0 2022-04-04 09:49:34.788 info 2/ Connection: successful: response.statusCode / statusMessage=200 / OK smartgarden.0 2022-04-04 09:49:34.291 info 2/ Gardena Smart System Service hosts at: smart_host: https://api.smart.gardena.dev authentication_host: https://api.authentication.husqvarnagroup.dev smartgarden.0 2022-04-04 09:49:34.290 info 2/ connecting to Gardena Smart System Service ... smartgarden.0 2022-04-04 09:49:34.288 info 2/ connectToGardena... smartgarden.0 2022-04-04 09:49:34.286 info 2/ getConnection... smartgarden.0 2022-04-04 09:49:34.204 info starting. Version 1.0.5 in C:/Program Files/iobroker/SmartHome/node_modules/iobroker.smartgarden, node: v14.18.0, js-controller: 4.0.21 smartgarden.0 2022-04-04 09:49:33.762 debug States connected to redis: 127.0.0.1:9010 smartgarden.0 2022-04-04 09:49:33.703 debug States create User PubSub Client smartgarden.0 2022-04-04 09:49:33.702 debug States create System PubSub Client smartgarden.0 2022-04-04 09:49:33.664 debug Redis States: Use Redis connection: 127.0.0.1:9010 smartgarden.0 2022-04-04 09:49:33.599 debug Objects connected to redis: 127.0.0.1:9011 smartgarden.0 2022-04-04 09:49:33.581 debug Objects client initialize lua scripts smartgarden.0 2022-04-04 09:49:33.452 debug Objects create User PubSub Client smartgarden.0 2022-04-04 09:49:33.450 debug Objects create System PubSub Client smartgarden.0 2022-04-04 09:49:33.447 debug Objects client ready ... initialize now smartgarden.0 2022-04-04 09:49:33.321 debug Redis Objects: Use Redis connection: 127.0.0.1:9011 smartgarden.0 2022-04-04 09:49:23.184 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason smartgarden.0 2022-04-04 09:49:23.182 info terminating smartgarden.0 2022-04-04 09:49:23.181 info 3/ cleaned everything up... smartgarden.0 2022-04-04 09:49:23.152 info Got terminate signal TERMINATE_YOURSELFAber nach wenigen Stunden trennt er sich von selber, warum?:
smartgarden.0 2022-04-04 12:04:05.516 info 2/ on_close: ### closed ### close.code=1001 close.reason=Going away smartgarden.0 2022-04-04 12:00:46.038 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:57:26.034 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:54:06.031 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:50:46.019 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:50:38.102 info 2/ setServiceStates: relationship searching smartgarden.0 2022-04-04 11:50:38.101 info 2/ parseMessage: COMMON found smartgarden.0 2022-04-04 11:50:38.088 info 2/ setServiceStates: relationship searching smartgarden.0 2022-04-04 11:50:38.088 info 2/ parseMessage: MOWER found smartgarden.0 2022-04-04 11:47:26.007 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:44:05.983 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:40:45.977 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:37:25.977 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:34:05.963 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:30:45.959 info 2/ on_pong: ++ pong'ed ++ smartgarden.0 2022-04-04 11:27:25.949 info 2/ on_pong: ++ pong'ed ++ -
Ich denke es hat sich erledigt, hatte den Ping auf 200 statt 150 Sekunden gesetzt...jetzt mit 150 Sekunden scheint es durch zu laufen.
@pino72 sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Ich denke es hat sich erledigt, hatte den Ping auf 200 statt 150 Sekunden gesetzt...jetzt mit 150 Sekunden scheint es durch zu laufen.
hätte ich jetzt nicht erwartet. Hab gerade nochmals nachgesehen. Gardena empfiehlt zwar 150 sec, aber das Maximum liegt bei 300 sec. Somit sollte es mit 200 sec eigentlich funktionieren. Aber man weiß ja nie.
-
Hallo
Habe in den letzten Jahren den Gardena Adapter ohne Probleme am Laufen.
Leider funktioniert dieser nicht mehr.
Nun habe ich mal den SmartGarden Adapter installiert.
Mit diesem Adapter komme ich nicht zurecht.
Auf der Husqvarna Seite bekomme ich folgenden Fehler angezeigt.
Soll ja heißen das Wartungsarbeiten im Developer Portal vorübergehend deaktiviert ist.
-
Hallo
Habe in den letzten Jahren den Gardena Adapter ohne Probleme am Laufen.
Leider funktioniert dieser nicht mehr.
Nun habe ich mal den SmartGarden Adapter installiert.
Mit diesem Adapter komme ich nicht zurecht.
Auf der Husqvarna Seite bekomme ich folgenden Fehler angezeigt.Soll ja heißen das Wartungsarbeiten im Developer Portal vorübergehend deaktiviert ist.
@premo
und was verstehst du da jetzt nicht?
Steht doch alles da. Augenblicklich kannst du dich nicht registrieren.Bitte keine Fragen per PN, die gehören ins Forum!
ioBroker
smartgarden Adapter für GARDENA smart system
Plattform: Raspberry Pi OS Linux 12 (bookworm), Node.js: v18.18.2, NPM: 9.8.1 -
@premo
und was verstehst du da jetzt nicht?
Steht doch alles da. Augenblicklich kannst du dich nicht registrieren.@jpgorganizer sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Augenblicklich kannst du dich nicht registrieren
Danke für die Antwort.
Habe gerade nochmal probiert und jetzt geht es. -
Hallo
Habe jetzt einen API Key bekommen und eingetragen. Leider wird der smartGarden
Adapter nur in Gelb angezeigt.
Log Ausgabe wird so ausgegeben.2022-04-08 10:57:17.076 - [32minfo[39m: smartgarden.0 (5116) starting. Version 1.0.5 in C:/Program Files/iobroker/IOBroker/node_modules/iobroker.smartgarden, node: v14.18.1 2022-04-08 10:57:17.128 - [32minfo[39m: smartgarden.0 (5116) 3/ getConnection... 2022-04-08 10:57:17.129 - [32minfo[39m: smartgarden.0 (5116) 3/ connectToGardena... 2022-04-08 10:57:17.132 - [32minfo[39m: smartgarden.0 (5116) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 10:57:17.134 - [32minfo[39m: smartgarden.0 (5116) 3/ connecting to Gardena Smart System Service ... 2022-04-08 10:57:17.134 - [32minfo[39m: smartgarden.0 (5116) 3/ Gardena Smart System Service hosts at: smart_host: https://smart.gardena.com authentication_host: https://ssp.dss.husqvarnagroup.com 2022-04-08 10:57:17.221 - [32minfo[39m: smartgarden.0 (5116) 3/ sgSetState: info.revision value=Main: 2495 / API: 2506 ack=true 2022-04-08 10:57:17.232 - [32minfo[39m: smartgarden.0 (5116) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true) 2022-04-08 10:57:17.236 - [32minfo[39m: smartgarden.0 (5116) 3/ ---> State change by device: state sg.0.info.revision changed: Main: 2495 / API: 2506 (ack = true) 2022-04-08 10:57:17.237 - [32minfo[39m: smartgarden.0 (5116) 3/ ---> State change by device: state sg.0.info.adapterversion changed: 1.0.5 (ack = true) 2022-04-08 10:57:17.332 - [32minfo[39m: smartgarden.0 (5116) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 10:57:17.333 - [32minfo[39m: smartgarden.0 (5116) 3/ Connection failure.response.statusCode/Message=403/Forbidden 2022-04-08 10:57:17.334 - [32minfo[39m: smartgarden.0 (5116) 3/ Connection failure:..return with error 2022-04-08 10:57:17.334 - [31merror[39m: smartgarden.0 (5116) Error: request returned 403 Forbidden 2022-04-08 10:57:17.335 - [32minfo[39m: smartgarden.0 (5116) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 10:57:17.336 - [32minfo[39m: smartgarden.0 (5116) 3/ getConnection: returned connection error: request returned 403 Forbidden 2022-04-08 10:57:17.336 - [32minfo[39m: smartgarden.0 (5116) 3/ getConnection: trying to connect again in 300 seconds 2022-04-08 10:57:17.344 - [32minfo[39m: smartgarden.0 (5116) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true) 2022-04-08 10:57:17.345 - [32minfo[39m: smartgarden.0 (5116) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true) -
Hallo
Habe jetzt einen API Key bekommen und eingetragen. Leider wird der smartGarden
Adapter nur in Gelb angezeigt.
Log Ausgabe wird so ausgegeben.2022-04-08 10:57:17.076 - [32minfo[39m: smartgarden.0 (5116) starting. Version 1.0.5 in C:/Program Files/iobroker/IOBroker/node_modules/iobroker.smartgarden, node: v14.18.1 2022-04-08 10:57:17.128 - [32minfo[39m: smartgarden.0 (5116) 3/ getConnection... 2022-04-08 10:57:17.129 - [32minfo[39m: smartgarden.0 (5116) 3/ connectToGardena... 2022-04-08 10:57:17.132 - [32minfo[39m: smartgarden.0 (5116) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 10:57:17.134 - [32minfo[39m: smartgarden.0 (5116) 3/ connecting to Gardena Smart System Service ... 2022-04-08 10:57:17.134 - [32minfo[39m: smartgarden.0 (5116) 3/ Gardena Smart System Service hosts at: smart_host: https://smart.gardena.com authentication_host: https://ssp.dss.husqvarnagroup.com 2022-04-08 10:57:17.221 - [32minfo[39m: smartgarden.0 (5116) 3/ sgSetState: info.revision value=Main: 2495 / API: 2506 ack=true 2022-04-08 10:57:17.232 - [32minfo[39m: smartgarden.0 (5116) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true) 2022-04-08 10:57:17.236 - [32minfo[39m: smartgarden.0 (5116) 3/ ---> State change by device: state sg.0.info.revision changed: Main: 2495 / API: 2506 (ack = true) 2022-04-08 10:57:17.237 - [32minfo[39m: smartgarden.0 (5116) 3/ ---> State change by device: state sg.0.info.adapterversion changed: 1.0.5 (ack = true) 2022-04-08 10:57:17.332 - [32minfo[39m: smartgarden.0 (5116) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 10:57:17.333 - [32minfo[39m: smartgarden.0 (5116) 3/ Connection failure.response.statusCode/Message=403/Forbidden 2022-04-08 10:57:17.334 - [32minfo[39m: smartgarden.0 (5116) 3/ Connection failure:..return with error 2022-04-08 10:57:17.334 - [31merror[39m: smartgarden.0 (5116) Error: request returned 403 Forbidden 2022-04-08 10:57:17.335 - [32minfo[39m: smartgarden.0 (5116) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 10:57:17.336 - [32minfo[39m: smartgarden.0 (5116) 3/ getConnection: returned connection error: request returned 403 Forbidden 2022-04-08 10:57:17.336 - [32minfo[39m: smartgarden.0 (5116) 3/ getConnection: trying to connect again in 300 seconds 2022-04-08 10:57:17.344 - [32minfo[39m: smartgarden.0 (5116) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true) 2022-04-08 10:57:17.345 - [32minfo[39m: smartgarden.0 (5116) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true)@premo sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Connection failure.response.statusCode/Message=403/Forbidden
dein Account sagt " du kommst hier nicht rein " :-)
Passwort, Username, API Key kontrollieren
API's verknüpft?
Und was ist das?
authentication_host:
https://ssp.dss.husqvarnagroup.comDer Default sieht mal anders aus
Authentication host URL; default:https://api.authentication.husqvarnagroup.dev -
Danke für die bisherige Hilfe.
@jpgorganizer sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Passwort, Username, API Key kontrollieren
Passen alle soweit
@jpgorganizer sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
API's verknüpft?
GARDENA smart system API ist verknüpft
@jpgorganizer sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Und was ist das?
authentication_host: https://ssp.dss.husqvarnagroup.com
Habe so im Adapter stehen lassen.
Neuer Log :
2022-04-08 17:27:39.139 - [32minfo[39m: smartgarden.0 (6652) Got terminate signal TERMINATE_YOURSELF 2022-04-08 17:27:39.141 - [32minfo[39m: smartgarden.0 (6652) 3/ cleaned everything up... 2022-04-08 17:27:39.141 - [32minfo[39m: smartgarden.0 (6652) terminating 2022-04-08 17:27:39.142 - [32minfo[39m: smartgarden.0 (6652) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2022-04-08 17:27:39.720 - [32minfo[39m: host.DESKTOP-VCLNP9G(IOBroker) instance system.adapter.smartgarden.0 terminated with code 4294967196 (START_IMMEDIATELY_AFTER_STOP_HEX) 2022-04-08 17:27:41.665 - [32minfo[39m: host.DESKTOP-VCLNP9G(IOBroker) instance system.adapter.smartgarden.0 started with pid 11592 2022-04-08 17:27:43.593 - [32minfo[39m: smartgarden.0 (11592) starting. Version 1.0.5 in C:/Program Files/iobroker/IOBroker/node_modules/iobroker.smartgarden, node: v14.18.1 2022-04-08 17:27:43.626 - [32minfo[39m: smartgarden.0 (11592) 3/ getConnection... 2022-04-08 17:27:43.627 - [32minfo[39m: smartgarden.0 (11592) 3/ connectToGardena... 2022-04-08 17:27:43.630 - [32minfo[39m: smartgarden.0 (11592) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 17:27:43.632 - [32minfo[39m: smartgarden.0 (11592) 3/ connecting to Gardena Smart System Service ... 2022-04-08 17:27:43.633 - [32minfo[39m: smartgarden.0 (11592) 3/ Gardena Smart System Service hosts at: smart_host: https://smart.gardena.com authentication_host: https://api.authentication.husqvarnagroup.dev 2022-04-08 17:27:43.713 - [32minfo[39m: smartgarden.0 (11592) 3/ sgSetState: info.revision value=Main: 2495 / API: 2506 ack=true 2022-04-08 17:27:43.720 - [32minfo[39m: smartgarden.0 (11592) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true) 2022-04-08 17:27:43.726 - [32minfo[39m: smartgarden.0 (11592) 3/ ---> State change by device: state sg.0.info.revision changed: Main: 2495 / API: 2506 (ack = true) 2022-04-08 17:27:43.727 - [32minfo[39m: smartgarden.0 (11592) 3/ ---> State change by device: state sg.0.info.adapterversion changed: 1.0.5 (ack = true) 2022-04-08 17:27:44.062 - [32minfo[39m: smartgarden.0 (11592) 3/ Connection: successful: response.statusCode / statusMessage=200 / OK 2022-04-08 17:27:44.062 - [32minfo[39m: smartgarden.0 (11592) 3/ Connection: expires_in/timeout/factor:86399 / 86485 / 1.001 2022-04-08 17:27:44.063 - [32minfo[39m: smartgarden.0 (11592) 3/ connected ... auth_data=eyJhXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXX-XXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 2022-04-08 17:27:44.064 - [32minfo[39m: smartgarden.0 (11592) 3/ get_locations ... 2022-04-08 17:27:44.271 - [32minfo[39m: smartgarden.0 (11592) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 17:27:44.272 - [32minfo[39m: smartgarden.0 (11592) 3/ get_locations failure: response.statusCode/Message=400/Bad Request 2022-04-08 17:27:44.272 - [32minfo[39m: smartgarden.0 (11592) 3/ get_locations failure:..return with error 2022-04-08 17:27:44.273 - [31merror[39m: smartgarden.0 (11592) Error: request returned 400 Bad Request 2022-04-08 17:27:44.273 - [32minfo[39m: smartgarden.0 (11592) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 17:27:44.273 - [32minfo[39m: smartgarden.0 (11592) 3/ getConnection: returned connection error: request returned 400 Bad Request 2022-04-08 17:27:44.274 - [32minfo[39m: smartgarden.0 (11592) 3/ getConnection: trying to connect again in 300 seconds 2022-04-08 17:27:44.372 - [32minfo[39m: smartgarden.0 (11592) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true) 2022-04-08 17:27:44.374 - [32minfo[39m: smartgarden.0 (11592) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true) -
Danke für die bisherige Hilfe.
@jpgorganizer sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Passwort, Username, API Key kontrollieren
Passen alle soweit
@jpgorganizer sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
API's verknüpft?
GARDENA smart system API ist verknüpft
@jpgorganizer sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Und was ist das?
authentication_host: https://ssp.dss.husqvarnagroup.com
Habe so im Adapter stehen lassen.
Neuer Log :
2022-04-08 17:27:39.139 - [32minfo[39m: smartgarden.0 (6652) Got terminate signal TERMINATE_YOURSELF 2022-04-08 17:27:39.141 - [32minfo[39m: smartgarden.0 (6652) 3/ cleaned everything up... 2022-04-08 17:27:39.141 - [32minfo[39m: smartgarden.0 (6652) terminating 2022-04-08 17:27:39.142 - [32minfo[39m: smartgarden.0 (6652) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2022-04-08 17:27:39.720 - [32minfo[39m: host.DESKTOP-VCLNP9G(IOBroker) instance system.adapter.smartgarden.0 terminated with code 4294967196 (START_IMMEDIATELY_AFTER_STOP_HEX) 2022-04-08 17:27:41.665 - [32minfo[39m: host.DESKTOP-VCLNP9G(IOBroker) instance system.adapter.smartgarden.0 started with pid 11592 2022-04-08 17:27:43.593 - [32minfo[39m: smartgarden.0 (11592) starting. Version 1.0.5 in C:/Program Files/iobroker/IOBroker/node_modules/iobroker.smartgarden, node: v14.18.1 2022-04-08 17:27:43.626 - [32minfo[39m: smartgarden.0 (11592) 3/ getConnection... 2022-04-08 17:27:43.627 - [32minfo[39m: smartgarden.0 (11592) 3/ connectToGardena... 2022-04-08 17:27:43.630 - [32minfo[39m: smartgarden.0 (11592) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 17:27:43.632 - [32minfo[39m: smartgarden.0 (11592) 3/ connecting to Gardena Smart System Service ... 2022-04-08 17:27:43.633 - [32minfo[39m: smartgarden.0 (11592) 3/ Gardena Smart System Service hosts at: smart_host: https://smart.gardena.com authentication_host: https://api.authentication.husqvarnagroup.dev 2022-04-08 17:27:43.713 - [32minfo[39m: smartgarden.0 (11592) 3/ sgSetState: info.revision value=Main: 2495 / API: 2506 ack=true 2022-04-08 17:27:43.720 - [32minfo[39m: smartgarden.0 (11592) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true) 2022-04-08 17:27:43.726 - [32minfo[39m: smartgarden.0 (11592) 3/ ---> State change by device: state sg.0.info.revision changed: Main: 2495 / API: 2506 (ack = true) 2022-04-08 17:27:43.727 - [32minfo[39m: smartgarden.0 (11592) 3/ ---> State change by device: state sg.0.info.adapterversion changed: 1.0.5 (ack = true) 2022-04-08 17:27:44.062 - [32minfo[39m: smartgarden.0 (11592) 3/ Connection: successful: response.statusCode / statusMessage=200 / OK 2022-04-08 17:27:44.062 - [32minfo[39m: smartgarden.0 (11592) 3/ Connection: expires_in/timeout/factor:86399 / 86485 / 1.001 2022-04-08 17:27:44.063 - [32minfo[39m: smartgarden.0 (11592) 3/ connected ... auth_data=eyJhXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXX-XXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 2022-04-08 17:27:44.064 - [32minfo[39m: smartgarden.0 (11592) 3/ get_locations ... 2022-04-08 17:27:44.271 - [32minfo[39m: smartgarden.0 (11592) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 17:27:44.272 - [32minfo[39m: smartgarden.0 (11592) 3/ get_locations failure: response.statusCode/Message=400/Bad Request 2022-04-08 17:27:44.272 - [32minfo[39m: smartgarden.0 (11592) 3/ get_locations failure:..return with error 2022-04-08 17:27:44.273 - [31merror[39m: smartgarden.0 (11592) Error: request returned 400 Bad Request 2022-04-08 17:27:44.273 - [32minfo[39m: smartgarden.0 (11592) 3/ sgSetState: info.connection value=false ack=true 2022-04-08 17:27:44.273 - [32minfo[39m: smartgarden.0 (11592) 3/ getConnection: returned connection error: request returned 400 Bad Request 2022-04-08 17:27:44.274 - [32minfo[39m: smartgarden.0 (11592) 3/ getConnection: trying to connect again in 300 seconds 2022-04-08 17:27:44.372 - [32minfo[39m: smartgarden.0 (11592) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true) 2022-04-08 17:27:44.374 - [32minfo[39m: smartgarden.0 (11592) 3/ ---> State change by device: state sg.0.info.connection changed: false (ack = true)@premo sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Gardena Smart System Service hosts at: smart_host: https://smart.gardena.com authentication_host: https://api.authentication.husqvarnagroup.devvergleich mal deine Eingaben der Webadressen mit den Angaben in der Doku
Bitte keine Fragen per PN, die gehören ins Forum!
ioBroker
smartgarden Adapter für GARDENA smart system
Plattform: Raspberry Pi OS Linux 12 (bookworm), Node.js: v18.18.2, NPM: 9.8.1 -
@premo sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
Gardena Smart System Service hosts at: smart_host: https://smart.gardena.com authentication_host: https://api.authentication.husqvarnagroup.devvergleich mal deine Eingaben der Webadressen mit den Angaben in der Doku
@jpgorganizer sagte in [neuer Adapter] smartgarden adapter for Gardena smart system:
vergleich mal deine Eingaben der Webadressen mit den Angaben in der Doku
Danke, jetzt läuft es .
-
Ich denke es hat sich erledigt, hatte den Ping auf 200 statt 150 Sekunden gesetzt...jetzt mit 150 Sekunden scheint es durch zu laufen.
@pino72 said in [neuer Adapter] smartgarden adapter for Gardena smart system:
Ich denke es hat sich erledigt, hatte den Ping auf 200 statt 150 Sekunden gesetzt...jetzt mit 150 Sekunden scheint es durch zu laufen.
Hab mich zu früh gefreut, seit gestern wieder die regelmäßigen Abbrüche wie vorher, Ping ist auf 150. Hab es jetzt mal auf 100 gesetzt mal sehen ob das was ändert.
Scheint ja irgendwie noch nicht klar warum Gardena die Verbindung einfach so trennt ohne ersichtlichen Grund.
-
Bei mir auch Gelb, Ping auf 200 brachte gestern Grün und Heute wieder Gelb.
Letztes Jahr lief der Adapter ohne Probleme
Support us
841
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge