(gelöst)Radar wechselt von Grün auf rot
-
Hallo Freunde,
ab und an streikt mein Radar Adapter. Er wechselt in unregelmäßigen Abständen von Grün auf Rot. Dann ist wieder ein paar Tage Ruhe und irgendwann geht es wieder los.Noble not available, Error: Error: The module '/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 72. This version of Node.js requiresNODE_MODULE_VERSION 83. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).at Object.Module._extensions..node (internal/modules/cjs/loader.js:1144:18)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12)at Module.require (internal/modules/cjs/loader.js:974:19)at require (internal/modules/cjs/helpers.js:101:18)at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/native.js:6:15)at Module._compile (internal/modules/cjs/loader.js:1085:14)at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)at Module.load (internal/modules/cjs/loader.js:950Was kann man dagegen tun?
-
@wendy2702 sagte in Radar wechselt von Grün auf rot:
npm rebuild
das heißt ich gebe zuerst diesen Befehl ein.
npm rebuilddann den anderen mehr nicht?
Gruß OSR
Plattform
Linux x64 CPUs2 AMD G-T56N Processor 1646 MHz 8GB RAM -
@wendy2702 sagte in Radar wechselt von Grün auf rot:
npm rebuild
das heißt ich gebe zuerst diesen Befehl ein.
npm rebuilddann den anderen mehr nicht?
-
@ostseereiter Ja,
Ersten den einen Versuchen und wenn der nicht funktioniert könnte man den anderen probieren.
@wendy2702
ok im Moment ist alles erst mal wieder ok werde ich dann tun wenn der Adapter wieder spinnt. -
Hallo Freunde heute Abend wieder ror und grün im wechsel.
dann die beiden Befehle eingegeben. Der erste lief gut durch hat aber nicht geholfen. der zweite?andy@debian:/opt/iobroker$ npm install [sudo] Passwort für andy: > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’: ../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations] 107 | Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); | ^ In file included from ../authenticate_pam.cc:23: ../../nan/nan.h:1026:46: note: declared here 1026 | NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( | ^~~~~~~~~~~~ ../authenticate_pam.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE Authenticate(Nan::NAN_METHOD_ARGS_TYPE)’: ../authenticate_pam.cc:147:83: error: no matching function for call to ‘v8::Array::Get(v8::Local<v8::String>)’ 147 | Local<Value> res = options->Get(Nan::New<String>("serviceName").ToLocalChecked()); | ^ In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, v8::Local<v8::Value>)’ 3717 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate expects 2 arguments, 1 provided /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, uint32_t)’ 3720 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate expects 2 arguments, 1 provided ../authenticate_pam.cc:150:30: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 150 | serviceName->WriteUtf8(m->serviceName, sizeof(m->serviceName) - 1); | ~~~^~~~~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc:152:69: error: no matching function for call to ‘v8::Array::Get(v8::Local<v8::String>)’ 152 | res = options->Get(Nan::New<String>("remoteHost").ToLocalChecked()); | ^ In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, v8::Local<v8::Value>)’ 3717 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate expects 2 arguments, 1 provided /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, uint32_t)’ 3720 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate expects 2 arguments, 1 provided ../authenticate_pam.cc:155:29: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 155 | remoteHost->WriteUtf8(m->remoteHost, sizeof(m->remoteHost) - 1); | ~~~^~~~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc:160:25: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 160 | username->WriteUtf8(m->username, sizeof(m->username) - 1); | ~~~^~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc:161:25: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 161 | password->WriteUtf8(m->password, sizeof(m->password) - 1); | ~~~^~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc: At global scope: ../authenticate_pam.cc:170:6: error: variable or field ‘init’ declared void 170 | void init(Handle<Object> exports) { | ^~~~ ../authenticate_pam.cc:170:11: error: ‘Handle’ was not declared in this scope 170 | void init(Handle<Object> exports) { | ^~~~~~ ../authenticate_pam.cc:170:24: error: expected primary-expression before ‘>’ token 170 | void init(Handle<Object> exports) { | ^ ../authenticate_pam.cc:170:26: error: ‘exports’ was not declared in this scope 170 | void init(Handle<Object> exports) { | ^~~~~~~ In file included from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: ../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope; did you mean ‘int’? 175 | NODE_MODULE(authenticate_pam, init); | ^~~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:793:36: note: in definition of macro ‘NODE_MODULE_X’ 793 | (node::addon_register_func) (regfunc), \ | ^~~~~~~ ../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ 175 | NODE_MODULE(authenticate_pam, init); | ^~~~~~~~~~~ make: *** [authenticate_pam.target.mk:111: Release/obj.target/authenticate_pam/authenticate_pam.o] Fehler 1 make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:400:28) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:282:12) gyp ERR! System Linux 5.10.0-11-amd64 gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam gyp ERR! node -v v14.19.0 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok > iobroker.inst@2.0.3 install /opt/iobroker > node lib/checkVersions.js NPM version: 6.14.16 > iobroker.inst@2.0.3 postinstall /opt/iobroker > node lib/install.js ╭─────────────────────────────────────────────────────────╮ │ │ │ Manual installation of ioBroker is no longer supported │ │ on Linux, OSX and FreeBSD! │ │ Please refer to the documentation on how to install it! │ │ https://github.com/ioBroker/ioBroker/wiki/Installation │ │ │ ╰─────────────────────────────────────────────────────────╯ npm ERR! code ELIFECYCLE npm ERR! errno 100 npm ERR! iobroker.inst@2.0.3 postinstall: `node lib/install.js` npm ERR! Exit status 100 npm ERR! npm ERR! Failed at the iobroker.inst@2.0.3 postinstall script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-02-23T20_11_08_855Z-debug.log andy@debian:/opt/iobroker$Gruß OSR
Plattform
Linux x64 CPUs2 AMD G-T56N Processor 1646 MHz 8GB RAM -
und dann noch diese Meidung.
Cannot read property 'init' of null radar2.0 2022-02-23 21:16:01.100 error TypeError: Cannot read property 'init' of null at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.radar2/myNetworks.js:964:82) at listOnTimeout (internal/timers.js:557:17) at processTimers (internal/timers.js:500:7) radar2.0 2022-02-23 21:16:01.096 error uncaught exception: Cannot read property 'init' of null -
Hallo Freunde heute Abend wieder ror und grün im wechsel.
dann die beiden Befehle eingegeben. Der erste lief gut durch hat aber nicht geholfen. der zweite?andy@debian:/opt/iobroker$ npm install [sudo] Passwort für andy: > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’: ../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations] 107 | Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); | ^ In file included from ../authenticate_pam.cc:23: ../../nan/nan.h:1026:46: note: declared here 1026 | NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( | ^~~~~~~~~~~~ ../authenticate_pam.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE Authenticate(Nan::NAN_METHOD_ARGS_TYPE)’: ../authenticate_pam.cc:147:83: error: no matching function for call to ‘v8::Array::Get(v8::Local<v8::String>)’ 147 | Local<Value> res = options->Get(Nan::New<String>("serviceName").ToLocalChecked()); | ^ In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, v8::Local<v8::Value>)’ 3717 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate expects 2 arguments, 1 provided /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, uint32_t)’ 3720 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate expects 2 arguments, 1 provided ../authenticate_pam.cc:150:30: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 150 | serviceName->WriteUtf8(m->serviceName, sizeof(m->serviceName) - 1); | ~~~^~~~~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc:152:69: error: no matching function for call to ‘v8::Array::Get(v8::Local<v8::String>)’ 152 | res = options->Get(Nan::New<String>("remoteHost").ToLocalChecked()); | ^ In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, v8::Local<v8::Value>)’ 3717 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate expects 2 arguments, 1 provided /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, uint32_t)’ 3720 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate expects 2 arguments, 1 provided ../authenticate_pam.cc:155:29: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 155 | remoteHost->WriteUtf8(m->remoteHost, sizeof(m->remoteHost) - 1); | ~~~^~~~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc:160:25: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 160 | username->WriteUtf8(m->username, sizeof(m->username) - 1); | ~~~^~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc:161:25: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 161 | password->WriteUtf8(m->password, sizeof(m->password) - 1); | ~~~^~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc: At global scope: ../authenticate_pam.cc:170:6: error: variable or field ‘init’ declared void 170 | void init(Handle<Object> exports) { | ^~~~ ../authenticate_pam.cc:170:11: error: ‘Handle’ was not declared in this scope 170 | void init(Handle<Object> exports) { | ^~~~~~ ../authenticate_pam.cc:170:24: error: expected primary-expression before ‘>’ token 170 | void init(Handle<Object> exports) { | ^ ../authenticate_pam.cc:170:26: error: ‘exports’ was not declared in this scope 170 | void init(Handle<Object> exports) { | ^~~~~~~ In file included from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: ../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope; did you mean ‘int’? 175 | NODE_MODULE(authenticate_pam, init); | ^~~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:793:36: note: in definition of macro ‘NODE_MODULE_X’ 793 | (node::addon_register_func) (regfunc), \ | ^~~~~~~ ../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ 175 | NODE_MODULE(authenticate_pam, init); | ^~~~~~~~~~~ make: *** [authenticate_pam.target.mk:111: Release/obj.target/authenticate_pam/authenticate_pam.o] Fehler 1 make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:400:28) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:282:12) gyp ERR! System Linux 5.10.0-11-amd64 gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam gyp ERR! node -v v14.19.0 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok > iobroker.inst@2.0.3 install /opt/iobroker > node lib/checkVersions.js NPM version: 6.14.16 > iobroker.inst@2.0.3 postinstall /opt/iobroker > node lib/install.js ╭─────────────────────────────────────────────────────────╮ │ │ │ Manual installation of ioBroker is no longer supported │ │ on Linux, OSX and FreeBSD! │ │ Please refer to the documentation on how to install it! │ │ https://github.com/ioBroker/ioBroker/wiki/Installation │ │ │ ╰─────────────────────────────────────────────────────────╯ npm ERR! code ELIFECYCLE npm ERR! errno 100 npm ERR! iobroker.inst@2.0.3 postinstall: `node lib/install.js` npm ERR! Exit status 100 npm ERR! npm ERR! Failed at the iobroker.inst@2.0.3 postinstall script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-02-23T20_11_08_855Z-debug.log andy@debian:/opt/iobroker$Hast du zufällig den Adapter 'terminal' installiert?
Kegel den mal raus -
Hast du zufällig den Adapter 'terminal' installiert?
Kegel den mal rausGruß OSR
Plattform
Linux x64 CPUs2 AMD G-T56N Processor 1646 MHz 8GB RAM -
Dann müsste der Kram zu authenticate-pam schon mal wegfallen.
-
Dann müsste der Kram zu authenticate-pam schon mal wegfallen.
@thomas-braun
Jo nun ist es schon wenigerandy@debian:/opt/iobroker$ npm install [sudo] Passwort für andy: > iobroker.inst@2.0.3 install /opt/iobroker > node lib/checkVersions.js NPM version: 6.14.16 > iobroker.inst@2.0.3 postinstall /opt/iobroker > node lib/install.js ╭─────────────────────────────────────────────────────────╮ │ │ │ Manual installation of ioBroker is no longer supported │ │ on Linux, OSX and FreeBSD! │ │ Please refer to the documentation on how to install it! │ │ https://github.com/ioBroker/ioBroker/wiki/Installation │ │ │ ╰─────────────────────────────────────────────────────────╯ npm ERR! code ELIFECYCLE npm ERR! errno 100 npm ERR! iobroker.inst@2.0.3 postinstall: `node lib/install.js` npm ERR! Exit status 100 npm ERR! npm ERR! Failed at the iobroker.inst@2.0.3 postinstall script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-02-23T20_28_39_390Z-debug.log andy@debian:/opt/iobroker$Gruß OSR
Plattform
Linux x64 CPUs2 AMD G-T56N Processor 1646 MHz 8GB RAM -
@thomas-braun
Jo nun ist es schon wenigerandy@debian:/opt/iobroker$ npm install [sudo] Passwort für andy: > iobroker.inst@2.0.3 install /opt/iobroker > node lib/checkVersions.js NPM version: 6.14.16 > iobroker.inst@2.0.3 postinstall /opt/iobroker > node lib/install.js ╭─────────────────────────────────────────────────────────╮ │ │ │ Manual installation of ioBroker is no longer supported │ │ on Linux, OSX and FreeBSD! │ │ Please refer to the documentation on how to install it! │ │ https://github.com/ioBroker/ioBroker/wiki/Installation │ │ │ ╰─────────────────────────────────────────────────────────╯ npm ERR! code ELIFECYCLE npm ERR! errno 100 npm ERR! iobroker.inst@2.0.3 postinstall: `node lib/install.js` npm ERR! Exit status 100 npm ERR! npm ERR! Failed at the iobroker.inst@2.0.3 postinstall script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-02-23T20_28_39_390Z-debug.log andy@debian:/opt/iobroker$ -
@thomas-braun sagte in Radar wechselt von Grün auf rot:
npm cache clean --force
andy@debian:/opt/iobroker$ npm cache clean --force [sudo] Passwort für andy: npm WARN using --force I sure hope you know what you are doing.Gruß OSR
Plattform
Linux x64 CPUs2 AMD G-T56N Processor 1646 MHz 8GB RAM -
@thomas-braun sagte in Radar wechselt von Grün auf rot:
npm cache clean --force
andy@debian:/opt/iobroker$ npm cache clean --force [sudo] Passwort für andy: npm WARN using --force I sure hope you know what you are doing.Was ist eigentlich so ganz genau das Problem?
Ein Adapter-Neustart schaut wie aus? -
Was ist eigentlich so ganz genau das Problem?
Ein Adapter-Neustart schaut wie aus?@thomas-braun
er wechselt halt immer von rot auf grün.
Bei einen Neustart kommt dieses:
Adapter not running as root or iobroker has no sudo right, cannot use arp-scan! radar2.0 2022-02-23 21:51:50.649 warn Neither hcitool nor noble available to scan Bluetooth! radar2.0 2022-02-23 21:51:50.648 warn Noble not available, Error: Error: The module '/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 72. This version of Node.js requiresNODE_MODULE_VERSION 83. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).at Object.Module._extensions..node (internal/modules/cjs/loader.js:1144:18)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12)at Module.require (internal/modules/cjs/loader.js:974:19)at require (internal/modules/cjs/helpers.js:101:18)at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/native.js:6:15)at Module._compile (internal/modules/cjs/loader.js:1085:14)at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12) {code: 'ERR_DLOPEN_FAILED'}Gruß OSR
Plattform
Linux x64 CPUs2 AMD G-T56N Processor 1646 MHz 8GB RAM -
Noble not available, Error: Error: The module '/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 72. This version of Node.js requiresNODE_MODULE_VERSION 83. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).at Object.Module._extensions..node (internal/modules/cjs/loader.js:1144:18)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12)at Module.require (internal/modules/cjs/loader.js:974:19)at require (internal/modules/cjs/helpers.js:101:18)at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/native.js:6:15)at Module._compile (internal/modules/cjs/loader.js:1085:14)at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12) {code: 'ERR_DLOPEN_FAILED'} -
@thomas-braun
er wechselt halt immer von rot auf grün.
Bei einen Neustart kommt dieses:
Adapter not running as root or iobroker has no sudo right, cannot use arp-scan! radar2.0 2022-02-23 21:51:50.649 warn Neither hcitool nor noble available to scan Bluetooth! radar2.0 2022-02-23 21:51:50.648 warn Noble not available, Error: Error: The module '/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 72. This version of Node.js requiresNODE_MODULE_VERSION 83. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).at Object.Module._extensions..node (internal/modules/cjs/loader.js:1144:18)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12)at Module.require (internal/modules/cjs/loader.js:974:19)at require (internal/modules/cjs/helpers.js:101:18)at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/native.js:6:15)at Module._compile (internal/modules/cjs/loader.js:1085:14)at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12) {code: 'ERR_DLOPEN_FAILED'}@ostseereiter
Da kommt mit Sicherheit mehr. Bitte vollständigen Restart zeigen. -
@ostseereiter
Da kommt mit Sicherheit mehr. Bitte vollständigen Restart zeigen.3 22:00:35.707 info Adapter initialization finished! radar2.0 2022-02-23 22:00:34.550 info will scan external network every 60 minutes radar2.0 2022-02-23 22:00:34.549 warn scanDelay increased to 41.134 seconds, delayAway to 2 minutes! radar2.0 2022-02-23 22:00:34.548 info first scan took 39.134 seconds radar2.0 2022-02-23 21:59:55.410 info radar2 set use of noble(false), doArp(false), btid(-1) and doUwz(undefined,120,0,de,true). radar2.0 2022-02-23 21:59:55.408 info radar2 found 16 devices in config (Ich-,ECB-,Kinoserver,HP-Drucker,Fritzrepeater,Fire-Tablet10W,Firestick-4k-Receiver,lumi-gateway-v3-Flur,Node-RFID,SVPi-hole-raspberrypi,HarmonyHub,Wohnzimmer-Firestick,HandyAndy,Fernseher-Wohnzimmer,HandyHeike,SchellySpülmaschine) and 16 enabled. radar2.0 2022-02-23 21:59:55.404 warn Had error when reaching printer 'HP-Drucker'. Check link address! radar2.0 2022-02-23 21:59:46.175 info will scan printers [ 'HP-Drucker' ] every 720 minutes radar2.0 2022-02-23 21:59:45.859 info Will scan ECB for [ 'USD', 'RUB', 'GBP' ] every 60 minutes radar2.0 2022-02-23 21:59:45.755 info Adapter identified macs: (70:85:c2:36:f3:a7,18:60:24:30:ad:85,f6:b0:14:04:4b:73,cc:9e:a2:e9:21:77,04:cf:8c:af:f7:8e,68:9a:87:a8:b4:0c,68:c6:3a:8a:6a:f1,78:11:dc:b9:e6:e7,68:c6:3a:d5:38:04,b8:27:eb:c9:40:2d,00:04:20:ec:8b:d4,60:6d:3c:14:cf:1f,fc:a1:83:72:a8:e6,88:46:04:a6:84:cb,70:af:24:a6:3a:56,88:40:3b:dd:bb:64,98:f4:ab:f8:cb:6e), ips: (127.0.0.1,::1,192.168.178.100,192.168.178.122,192.168.178.36,192.168.178.32,192.168.178.74,192.168.178.99,192.168.178.180,192.168.178.84,192.168.178.46,192.168.178.73,192.168.178.59,192.168.178.203,192.168.178.82), bts LE: (), bts norm: () radar2.0 2022-02-23 21:59:45.446 info Init item SchellySpülmaschine with {name: 'SchellySpülmaschine',bluetooth: [],enabled: -1,id: 'SchellySpülmaschine',type: 'IP',hasMAC: [ '98:f4:ab:f8:cb:6e' ],ipVendor: 'Espressif Inc',rip: [ '192.168.178.82' ],lasthere: '2022-02-23T19:59:57.371Z'} radar2.0 2022-02-23 21:59:45.317 info Init item HandyHeike with {name: 'HandyHeike',bluetooth: [],enabled: -1,id: 'HandyHeike',type: 'IP',hasMAC: [ '88:40:3b:dd:bb:64' ],ipVendor: 'Huawei Tech Co, Ltd',rip: [ '192.168.178.203' ],lasthere: '2022-02-23T04:37:54.981Z'} radar2.0 2022-02-23 21:59:39.051 info Init item Fernseher-Wohnzimmer with {name: 'Fernseher-Wohnzimmer',bluetooth: [],enabled: -1,id: 'Fernseher-Wohnzimmer',type: 'IP',hasMAC: [ '70:af:24:a6:3a:56' ],ipVendor: 'TP Vision Belgium NV',rip: [ '192.168.178.59' ],lasthere: '2022-02-21T13:55:13.554Z'} radar2.0 2022-02-23 21:59:31.221 info Init item HandyAndy with {name: 'HandyAndy',bluetooth: [],enabled: -1,id: 'HandyAndy',type: 'IP',hasMAC: [ '88:46:04:a6:84:cb' ],ipVendor: 'N/A',rip: [ '192.168.178.73' ],lasthere: '2022-02-23T19:43:09.974Z'} radar2.0 2022-02-23 21:59:24.995 info Init item Wohnzimmer-Firestick with {name: 'Wohnzimmer-Firestick',bluetooth: [],enabled: -1,id: 'Wohnzimmer-Firestick',type: 'IP',hasMAC: [ '60:6d:3c:14:cf:1f', 'fc:a1:83:72:a8:e6' ],ipVendor: 'Luxshare Precision Industry Co Ltd',rip: [ '192.168.178.46' ],lasthere: '2022-02-23T19:59:42.064Z'} radar2.0 2022-02-23 21:59:22.788 info Init item HarmonyHub with {name: 'HarmonyHub',bluetooth: [],enabled: -1,id: 'HarmonyHub',type: 'IP',hasMAC: [ '00:04:20:ec:8b:d4' ],ipVendor: 'Slim Devices, Inc',rip: [ '192.168.178.84' ],lasthere: '2022-02-23T20:58:50.892Z'} radar2.0 2022-02-23 21:59:22.664 info Init item SVPi-hole-raspberrypi with {name: 'SVPi-hole-raspberrypi',bluetooth: [],enabled: -1,id: 'SVPi-hole-raspberrypi',type: 'IP',hasMAC: [ 'b8:27:eb:c9:40:2d' ],ipVendor: 'Raspberry Pi Foundation',rip: [ '192.168.178.180' ],lasthere: '2022-02-23T20:07:59.904Z'} radar2.0 2022-02-23 21:59:22.569 info Init item Node-RFID with {name: 'Node-RFID',bluetooth: [],enabled: -1,id: 'Node-RFID',type: 'IP',hasMAC: [ '68:c6:3a:d5:38:04' ],ipVendor: 'Espressif Inc',rip: [ '192.168.178.99' ],lasthere: '2022-02-23T20:52:59.963Z'} radar2.0 2022-02-23 21:59:22.460 info Init item lumi-gateway-v3-Flur with {name: 'lumi-gateway-v3-Flur',bluetooth: [],enabled: -1,id: 'lumi-gateway-v3-Flur',type: 'IP',hasMAC: [ '78:11:dc:b9:e6:e7' ],ipVendor: 'Xiaomi Electronics, Co, Ltd',rip: [ '192.168.178.74' ],lasthere: '2022-02-23T20:52:59.865Z'} radar2.0 2022-02-23 21:59:22.363 info Init item Firestick-4k-Receiver with {name: 'Firestick-4k-Receiver',bluetooth: [],enabled: -1,id: 'Firestick-4k-Receiver',type: 'IP',hasMAC: [ '68:9a:87:a8:b4:0c', '68:c6:3a:8a:6a:f1' ],ipVendor: 'Amazon Tech Inc',rip: [ '192.168.178.32' ],lasthere: '2022-02-23T20:52:59.800Z'} radar2.0 2022-02-23 21:59:22.119 info Init item Fire-Tablet10W with {name: 'Fire-Tablet10W',bluetooth: [],enabled: -1,id: 'Fire-Tablet10W',type: 'IP',hasMAC: [ 'cc:9e:a2:e9:21:77', '04:cf:8c:af:f7:8e' ],ipVendor: 'Amazon Tech Inc',rip: [ '192.168.178.36' ],lasthere: '2022-02-23T20:52:59.716Z'} radar2.0 2022-02-23 21:59:21.925 info Init item Fritzrepeater with {name: 'Fritzrepeater',bluetooth: [],enabled: -1,id: 'Fritzrepeater',type: 'IP',hasMAC: [ 'f6:b0:14:04:4b:73' ],ipVendor: 'N/A',rip: [ '192.168.178.122' ],lasthere: '2022-01-25T16:53:01.246Z'} radar2.0 2022-02-23 21:59:15.678 info Init item HP-Drucker with {name: 'HP-Drucker',ip: [ '192.168.178.70' ],bluetooth: [],enabled: -1,id: 'HP-Drucker',type: 'printer',hasMAC: [ '18:60:24:30:ad:85' ],ipVendor: 'Hewlett Packard',lasthere: '2022-01-23T10:32:11.729Z'} radar2.0 2022-02-23 21:59:15.615 info Init item Kinoserver with {name: 'Kinoserver',bluetooth: [],enabled: -1,id: 'Kinoserver',type: 'IP',hasMAC: [ '70:85:c2:36:f3:a7' ],ipVendor: 'ASRock Incorporation',rip: [ '192.168.178.100' ],lasthere: '2022-01-28T20:24:38.122Z'} radar2.0 2022-02-23 21:59:09.302 info Init item ECB- with {name: 'ECB-',ip: [ 'USD', 'RUB', 'GBP' ],bluetooth: [],enabled: -1,id: 'ECB',type: 'ECB'} radar2.0 2022-02-23 21:59:09.242 info Init item Ich- with {name: 'Ich-',bluetooth: [],enabled: -1,id: 'Ich',type: 'IP',rip: [ '127.0.0.1', '::1' ],lasthere: '2022-02-23T20:57:50.770Z'} radar2.0 2022-02-23 21:59:08.664 info Will try to scan BT devices: hci0 00:1A:7D:DA:71:0F radar2.0 2022-02-23 21:59:08.591 warn Adapter not running as root or iobroker has no sudo right, cannot use arp-scan! radar2.0 2022-02-23 21:59:08.497 info Connected with '0.0.0.0' for DHCP Scan radar2.0 2022-02-23 21:59:08.468 info arp-scan will use the following interfaces: [ 'enp3s0' ] radar2.0 2022-02-23 21:59:08.435 warn Neither hcitool nor noble available to scan Bluetooth! radar2.0 2022-02-23 21:59:08.433 warn Noble not available, Error: Error: The module '/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 72. This version of Node.js requiresNODE_MODULE_VERSION 83. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).at Object.Module._extensions..node (internal/modules/cjs/loader.js:1144:18)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12)at Module.require (internal/modules/cjs/loader.js:974:19)at require (internal/modules/cjs/helpers.js:101:18)at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/native.js:6:15)at Module._compile (internal/modules/cjs/loader.js:1085:14)at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12) {code: 'ERR_DLOPEN_FAILED'} radar2.0 2022-02-23 21:59:07.837 info Will use l2Ping for BT scans. radar2.0 2022-02-23 21:59:07.814 info radar2 initialization started... radar2.0 2022-02-23 21:59:07.275 info starting. Version 2.0.3 in /opt/iobroker/node_modules/iobroker.radar2, node: v14.19.0, js-controller: 3.3.22 radar2.0 2022-02-23 21:59:00.241 info terminating radar2.0 2022-02-23 21:59:00.240 info terminating radar2.0 2022-02-23 21:59:00.237 info Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason radar2.0 2022-02-23 21:59:00.233 info terminating radar2.0 2022-02-23 21:59:00.138 info Adapter disconnected and stopped with dostop(null) and callback(true) radar2.0 2022-02-23 21:59:00.128 info Unload adapter now with null radar2.0 2022-02-23 21:59:00.095 info Scheduled restart. radar2.0 2022-02-23 21:58:57.244 info Init item HandyAndy with {name: 'HandyAndy',bluetooth: [],enabled: -1,id: 'HandyAndy',type: 'IP',hasMAC: [ '88:46:04:a6:84:cb' ],ipVendor: 'N/A',rip: [ '192.168.178.73' ],lasthere: '2022-02-23T19:43:09.974Z'} radar2.0 2022-02-23 21:58:51.028 info Init item Wohnzimmer-Firestick with {name: 'Wohnzimmer-Firestick',bluetooth: [],enabled: -1,id: 'Wohnzimmer-Firestick',type: 'IP',hasMAC: [ '60:6d:3c:14:cf:1f', 'fc:a1:83:72:a8:e6' ],ipVendor: 'Luxshare Precision Industry Co Ltd',rip: [ '192.168.178.46' ],lasthere: '2022-02-23T19:59:42.064Z'} radar2.0 2022-02-23 21:58:50.926 info Init item HarmonyHub with {name: 'HarmonyHub',bluetooth: [],enabled: -1,id: 'HarmonyHub',type: 'IP',hasMAC: [ '00:04:20:ec:8b:d4' ],ipVendor: 'Slim Devices, Inc',rip: [ '192.168.178.84' ],lasthere: '2022-02-23T20:57:20.703Z'} radar2.0 2022-02-23 21:58:50.806 info Init item SVPi-hole-raspberrypi with {name: 'SVPi-hole-raspberrypi',bluetooth: [],enabled: -1,id: 'SVPi-hole-raspberrypi',type: 'IP',hasMAC: [ 'b8:27:eb:c9:40:2d' ],ipVendor: 'Raspberry Pi Foundation',rip: [ '192.168.178.180' ],lasthere: '2022-02-23T20:07:59.904Z'} radar2.0 2022-02-23 21:58:50.652 info Init item Node-RFID with {name: 'Node-RFID',bluetooth: [],enabled: -1,id: 'Node-RFID',type: 'IP',hasMAC: [ '68:c6:3a:d5:38:04' ],ipVendor: 'Espressif Inc',rip: [ '192.168.178.99' ],lasthere: '2022-02-23T20:52:59.963Z'} radar2.0 2022-02-23 21:58:50.547 info Init item lumi-gateway-v3-Flur with {name: 'lumi-gateway-v3-Flur',bluetooth: [],enabled: -1,id: 'lumi-gateway-v3-Flur',type: 'IP',hasMAC: [ '78:11:dc:b9:e6:e7' ],ipVendor: 'Xiaomi Electronics, Co, Ltd',rip: [ '192.168.178.74' ],lasthere: '2022-02-23T20:52:59.865Z'} radar2.0 2022-02-23 21:58:50.455 info Init item Firestick-4k-Receiver with {name: 'Firestick-4k-Receiver',bluetooth: [],enabled: -1,id: 'Firestick-4k-Receiver',type: 'IP',hasMAC: [ '68:9a:87:a8:b4:0c', '68:c6:3a:8a:6a:f1' ],ipVendor: 'Amazon Tech Inc',rip: [ '192.168.178.32' ],lasthere: '2022-02-23T20:52:59.800Z'} radar2.0 2022-02-23 21:58:50.247 info Init item Fire-Tablet10W with {name: 'Fire-Tablet10W',bluetooth: [],enabled: -1,id: 'Fire-Tablet10W',type: 'IP',hasMAC: [ 'cc:9e:a2:e9:21:77', '04:cf:8c:af:f7:8e' ],ipVendor: 'Amazon Tech Inc',rip: [ '192.168.178.36' ],lasthere: '2022-02-23T20:52:59.716Z'} radar2.0 2022-02-23 21:58:49.995 info Init item Fritzrepeater with {name: 'Fritzrepeater',bluetooth: [],enabled: -1,id: 'Fritzrepeater',type: 'IP',hasMAC: [ 'f6:b0:14:04:4b:73' ],ipVendor: 'N/A',rip: [ '192.168.178.122' ],lasthere: '2022-01-25T16:53:01.246Z'} radar2.0 2022-02-23 21:58:43.602 info Init item HP-Drucker with {name: 'HP-Drucker',ip: [ '192.168.178.70' ],bluetooth: [],enabled: -1,id: 'HP-Drucker',type: 'printer',hasMAC: [ '18:60:24:30:ad:85' ],ipVendor: 'Hewlett Packard',lasthere: '2022-01-23T10:32:11.729Z'} radar2.0 2022-02-23 21:58:43.461 info Init item Kinoserver with {name: 'Kinoserver',bluetooth: [],enabled: -1,id: 'Kinoserver',type: 'IP',hasMAC: [ '70:85:c2:36:f3:a7' ],ipVendor: 'ASRock Incorporation',rip: [ '192.168.178.100' ],lasthere: '2022-01-28T20:24:38.122Z'} radar2.0 2022-02-23 21:58:37.161 info Init item ECB- with {name: 'ECB-',ip: [ 'USD', 'RUB', 'GBP' ],bluetooth: [],enabled: -1,id: 'ECB',type: 'ECB'} radar2.0 2022-02-23 21:58:37.128 info Init item Ich- with {name: 'Ich-',bluetooth: [],enabled: -1,id: 'Ich',type: 'IP',rip: [ '127.0.0.1', '::1' ],lasthere: '2022-02-23T20:57:50.770Z'} radar2.0 2022-02-23 21:58:36.935 info Will try to scan BT devices: hci0 00:1A:7D:DA:71:0F radar2.0 2022-02-23 21:58:36.880 warn Adapter not running as root or iobroker has no sudo right, cannot use arp-scan! radar2.0 2022-02-23 21:58:36.805 info Connected with '0.0.0.0' for DHCP Scan radar2.0 2022-02-23 21:58:36.757 info arp-scan will use the following interfaces: [ 'enp3s0' ] radar2.0 2022-02-23 21:58:36.699 warn Neither hcitool nor noble available to scan Bluetooth! radar2.0 2022-02-23 21:58:36.697 warn Noble not available, Error: Error: The module '/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 72. This version of Node.js requiresNODE_MODULE_VERSION 83. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).at Object.Module._extensions..node (internal/modules/cjs/loader.js:1144:18)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12)at Module.require (internal/modules/cjs/loader.js:974:19)at require (internal/modules/cjs/helpers.js:101:18)at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/native.js:6:15)at Module._compile (internal/modules/cjs/loader.js:1085:14)at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12) {code: 'ERR_DLOPEN_FAILED'} radar2.0 2022-02-23 21:58:36.173 info Will use l2Ping for BT scans. radar2.0 2022-02-23 21:58:36.134 info radar2 initialization started... radar2.0 2022-02-23 21:58:35.691 info starting. Version 2.0.3 in /opt/iobroker/node_modules/iobroker.radar2, node: v14.19.0, js-controller: 3.3.22Gruß OSR
Plattform
Linux x64 CPUs2 AMD G-T56N Processor 1646 MHz 8GB RAM -
3 22:00:35.707 info Adapter initialization finished! radar2.0 2022-02-23 22:00:34.550 info will scan external network every 60 minutes radar2.0 2022-02-23 22:00:34.549 warn scanDelay increased to 41.134 seconds, delayAway to 2 minutes! radar2.0 2022-02-23 22:00:34.548 info first scan took 39.134 seconds radar2.0 2022-02-23 21:59:55.410 info radar2 set use of noble(false), doArp(false), btid(-1) and doUwz(undefined,120,0,de,true). radar2.0 2022-02-23 21:59:55.408 info radar2 found 16 devices in config (Ich-,ECB-,Kinoserver,HP-Drucker,Fritzrepeater,Fire-Tablet10W,Firestick-4k-Receiver,lumi-gateway-v3-Flur,Node-RFID,SVPi-hole-raspberrypi,HarmonyHub,Wohnzimmer-Firestick,HandyAndy,Fernseher-Wohnzimmer,HandyHeike,SchellySpülmaschine) and 16 enabled. radar2.0 2022-02-23 21:59:55.404 warn Had error when reaching printer 'HP-Drucker'. Check link address! radar2.0 2022-02-23 21:59:46.175 info will scan printers [ 'HP-Drucker' ] every 720 minutes radar2.0 2022-02-23 21:59:45.859 info Will scan ECB for [ 'USD', 'RUB', 'GBP' ] every 60 minutes radar2.0 2022-02-23 21:59:45.755 info Adapter identified macs: (70:85:c2:36:f3:a7,18:60:24:30:ad:85,f6:b0:14:04:4b:73,cc:9e:a2:e9:21:77,04:cf:8c:af:f7:8e,68:9a:87:a8:b4:0c,68:c6:3a:8a:6a:f1,78:11:dc:b9:e6:e7,68:c6:3a:d5:38:04,b8:27:eb:c9:40:2d,00:04:20:ec:8b:d4,60:6d:3c:14:cf:1f,fc:a1:83:72:a8:e6,88:46:04:a6:84:cb,70:af:24:a6:3a:56,88:40:3b:dd:bb:64,98:f4:ab:f8:cb:6e), ips: (127.0.0.1,::1,192.168.178.100,192.168.178.122,192.168.178.36,192.168.178.32,192.168.178.74,192.168.178.99,192.168.178.180,192.168.178.84,192.168.178.46,192.168.178.73,192.168.178.59,192.168.178.203,192.168.178.82), bts LE: (), bts norm: () radar2.0 2022-02-23 21:59:45.446 info Init item SchellySpülmaschine with {name: 'SchellySpülmaschine',bluetooth: [],enabled: -1,id: 'SchellySpülmaschine',type: 'IP',hasMAC: [ '98:f4:ab:f8:cb:6e' ],ipVendor: 'Espressif Inc',rip: [ '192.168.178.82' ],lasthere: '2022-02-23T19:59:57.371Z'} radar2.0 2022-02-23 21:59:45.317 info Init item HandyHeike with {name: 'HandyHeike',bluetooth: [],enabled: -1,id: 'HandyHeike',type: 'IP',hasMAC: [ '88:40:3b:dd:bb:64' ],ipVendor: 'Huawei Tech Co, Ltd',rip: [ '192.168.178.203' ],lasthere: '2022-02-23T04:37:54.981Z'} radar2.0 2022-02-23 21:59:39.051 info Init item Fernseher-Wohnzimmer with {name: 'Fernseher-Wohnzimmer',bluetooth: [],enabled: -1,id: 'Fernseher-Wohnzimmer',type: 'IP',hasMAC: [ '70:af:24:a6:3a:56' ],ipVendor: 'TP Vision Belgium NV',rip: [ '192.168.178.59' ],lasthere: '2022-02-21T13:55:13.554Z'} radar2.0 2022-02-23 21:59:31.221 info Init item HandyAndy with {name: 'HandyAndy',bluetooth: [],enabled: -1,id: 'HandyAndy',type: 'IP',hasMAC: [ '88:46:04:a6:84:cb' ],ipVendor: 'N/A',rip: [ '192.168.178.73' ],lasthere: '2022-02-23T19:43:09.974Z'} radar2.0 2022-02-23 21:59:24.995 info Init item Wohnzimmer-Firestick with {name: 'Wohnzimmer-Firestick',bluetooth: [],enabled: -1,id: 'Wohnzimmer-Firestick',type: 'IP',hasMAC: [ '60:6d:3c:14:cf:1f', 'fc:a1:83:72:a8:e6' ],ipVendor: 'Luxshare Precision Industry Co Ltd',rip: [ '192.168.178.46' ],lasthere: '2022-02-23T19:59:42.064Z'} radar2.0 2022-02-23 21:59:22.788 info Init item HarmonyHub with {name: 'HarmonyHub',bluetooth: [],enabled: -1,id: 'HarmonyHub',type: 'IP',hasMAC: [ '00:04:20:ec:8b:d4' ],ipVendor: 'Slim Devices, Inc',rip: [ '192.168.178.84' ],lasthere: '2022-02-23T20:58:50.892Z'} radar2.0 2022-02-23 21:59:22.664 info Init item SVPi-hole-raspberrypi with {name: 'SVPi-hole-raspberrypi',bluetooth: [],enabled: -1,id: 'SVPi-hole-raspberrypi',type: 'IP',hasMAC: [ 'b8:27:eb:c9:40:2d' ],ipVendor: 'Raspberry Pi Foundation',rip: [ '192.168.178.180' ],lasthere: '2022-02-23T20:07:59.904Z'} radar2.0 2022-02-23 21:59:22.569 info Init item Node-RFID with {name: 'Node-RFID',bluetooth: [],enabled: -1,id: 'Node-RFID',type: 'IP',hasMAC: [ '68:c6:3a:d5:38:04' ],ipVendor: 'Espressif Inc',rip: [ '192.168.178.99' ],lasthere: '2022-02-23T20:52:59.963Z'} radar2.0 2022-02-23 21:59:22.460 info Init item lumi-gateway-v3-Flur with {name: 'lumi-gateway-v3-Flur',bluetooth: [],enabled: -1,id: 'lumi-gateway-v3-Flur',type: 'IP',hasMAC: [ '78:11:dc:b9:e6:e7' ],ipVendor: 'Xiaomi Electronics, Co, Ltd',rip: [ '192.168.178.74' ],lasthere: '2022-02-23T20:52:59.865Z'} radar2.0 2022-02-23 21:59:22.363 info Init item Firestick-4k-Receiver with {name: 'Firestick-4k-Receiver',bluetooth: [],enabled: -1,id: 'Firestick-4k-Receiver',type: 'IP',hasMAC: [ '68:9a:87:a8:b4:0c', '68:c6:3a:8a:6a:f1' ],ipVendor: 'Amazon Tech Inc',rip: [ '192.168.178.32' ],lasthere: '2022-02-23T20:52:59.800Z'} radar2.0 2022-02-23 21:59:22.119 info Init item Fire-Tablet10W with {name: 'Fire-Tablet10W',bluetooth: [],enabled: -1,id: 'Fire-Tablet10W',type: 'IP',hasMAC: [ 'cc:9e:a2:e9:21:77', '04:cf:8c:af:f7:8e' ],ipVendor: 'Amazon Tech Inc',rip: [ '192.168.178.36' ],lasthere: '2022-02-23T20:52:59.716Z'} radar2.0 2022-02-23 21:59:21.925 info Init item Fritzrepeater with {name: 'Fritzrepeater',bluetooth: [],enabled: -1,id: 'Fritzrepeater',type: 'IP',hasMAC: [ 'f6:b0:14:04:4b:73' ],ipVendor: 'N/A',rip: [ '192.168.178.122' ],lasthere: '2022-01-25T16:53:01.246Z'} radar2.0 2022-02-23 21:59:15.678 info Init item HP-Drucker with {name: 'HP-Drucker',ip: [ '192.168.178.70' ],bluetooth: [],enabled: -1,id: 'HP-Drucker',type: 'printer',hasMAC: [ '18:60:24:30:ad:85' ],ipVendor: 'Hewlett Packard',lasthere: '2022-01-23T10:32:11.729Z'} radar2.0 2022-02-23 21:59:15.615 info Init item Kinoserver with {name: 'Kinoserver',bluetooth: [],enabled: -1,id: 'Kinoserver',type: 'IP',hasMAC: [ '70:85:c2:36:f3:a7' ],ipVendor: 'ASRock Incorporation',rip: [ '192.168.178.100' ],lasthere: '2022-01-28T20:24:38.122Z'} radar2.0 2022-02-23 21:59:09.302 info Init item ECB- with {name: 'ECB-',ip: [ 'USD', 'RUB', 'GBP' ],bluetooth: [],enabled: -1,id: 'ECB',type: 'ECB'} radar2.0 2022-02-23 21:59:09.242 info Init item Ich- with {name: 'Ich-',bluetooth: [],enabled: -1,id: 'Ich',type: 'IP',rip: [ '127.0.0.1', '::1' ],lasthere: '2022-02-23T20:57:50.770Z'} radar2.0 2022-02-23 21:59:08.664 info Will try to scan BT devices: hci0 00:1A:7D:DA:71:0F radar2.0 2022-02-23 21:59:08.591 warn Adapter not running as root or iobroker has no sudo right, cannot use arp-scan! radar2.0 2022-02-23 21:59:08.497 info Connected with '0.0.0.0' for DHCP Scan radar2.0 2022-02-23 21:59:08.468 info arp-scan will use the following interfaces: [ 'enp3s0' ] radar2.0 2022-02-23 21:59:08.435 warn Neither hcitool nor noble available to scan Bluetooth! radar2.0 2022-02-23 21:59:08.433 warn Noble not available, Error: Error: The module '/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 72. This version of Node.js requiresNODE_MODULE_VERSION 83. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).at Object.Module._extensions..node (internal/modules/cjs/loader.js:1144:18)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12)at Module.require (internal/modules/cjs/loader.js:974:19)at require (internal/modules/cjs/helpers.js:101:18)at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/native.js:6:15)at Module._compile (internal/modules/cjs/loader.js:1085:14)at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12) {code: 'ERR_DLOPEN_FAILED'} radar2.0 2022-02-23 21:59:07.837 info Will use l2Ping for BT scans. radar2.0 2022-02-23 21:59:07.814 info radar2 initialization started... radar2.0 2022-02-23 21:59:07.275 info starting. Version 2.0.3 in /opt/iobroker/node_modules/iobroker.radar2, node: v14.19.0, js-controller: 3.3.22 radar2.0 2022-02-23 21:59:00.241 info terminating radar2.0 2022-02-23 21:59:00.240 info terminating radar2.0 2022-02-23 21:59:00.237 info Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason radar2.0 2022-02-23 21:59:00.233 info terminating radar2.0 2022-02-23 21:59:00.138 info Adapter disconnected and stopped with dostop(null) and callback(true) radar2.0 2022-02-23 21:59:00.128 info Unload adapter now with null radar2.0 2022-02-23 21:59:00.095 info Scheduled restart. radar2.0 2022-02-23 21:58:57.244 info Init item HandyAndy with {name: 'HandyAndy',bluetooth: [],enabled: -1,id: 'HandyAndy',type: 'IP',hasMAC: [ '88:46:04:a6:84:cb' ],ipVendor: 'N/A',rip: [ '192.168.178.73' ],lasthere: '2022-02-23T19:43:09.974Z'} radar2.0 2022-02-23 21:58:51.028 info Init item Wohnzimmer-Firestick with {name: 'Wohnzimmer-Firestick',bluetooth: [],enabled: -1,id: 'Wohnzimmer-Firestick',type: 'IP',hasMAC: [ '60:6d:3c:14:cf:1f', 'fc:a1:83:72:a8:e6' ],ipVendor: 'Luxshare Precision Industry Co Ltd',rip: [ '192.168.178.46' ],lasthere: '2022-02-23T19:59:42.064Z'} radar2.0 2022-02-23 21:58:50.926 info Init item HarmonyHub with {name: 'HarmonyHub',bluetooth: [],enabled: -1,id: 'HarmonyHub',type: 'IP',hasMAC: [ '00:04:20:ec:8b:d4' ],ipVendor: 'Slim Devices, Inc',rip: [ '192.168.178.84' ],lasthere: '2022-02-23T20:57:20.703Z'} radar2.0 2022-02-23 21:58:50.806 info Init item SVPi-hole-raspberrypi with {name: 'SVPi-hole-raspberrypi',bluetooth: [],enabled: -1,id: 'SVPi-hole-raspberrypi',type: 'IP',hasMAC: [ 'b8:27:eb:c9:40:2d' ],ipVendor: 'Raspberry Pi Foundation',rip: [ '192.168.178.180' ],lasthere: '2022-02-23T20:07:59.904Z'} radar2.0 2022-02-23 21:58:50.652 info Init item Node-RFID with {name: 'Node-RFID',bluetooth: [],enabled: -1,id: 'Node-RFID',type: 'IP',hasMAC: [ '68:c6:3a:d5:38:04' ],ipVendor: 'Espressif Inc',rip: [ '192.168.178.99' ],lasthere: '2022-02-23T20:52:59.963Z'} radar2.0 2022-02-23 21:58:50.547 info Init item lumi-gateway-v3-Flur with {name: 'lumi-gateway-v3-Flur',bluetooth: [],enabled: -1,id: 'lumi-gateway-v3-Flur',type: 'IP',hasMAC: [ '78:11:dc:b9:e6:e7' ],ipVendor: 'Xiaomi Electronics, Co, Ltd',rip: [ '192.168.178.74' ],lasthere: '2022-02-23T20:52:59.865Z'} radar2.0 2022-02-23 21:58:50.455 info Init item Firestick-4k-Receiver with {name: 'Firestick-4k-Receiver',bluetooth: [],enabled: -1,id: 'Firestick-4k-Receiver',type: 'IP',hasMAC: [ '68:9a:87:a8:b4:0c', '68:c6:3a:8a:6a:f1' ],ipVendor: 'Amazon Tech Inc',rip: [ '192.168.178.32' ],lasthere: '2022-02-23T20:52:59.800Z'} radar2.0 2022-02-23 21:58:50.247 info Init item Fire-Tablet10W with {name: 'Fire-Tablet10W',bluetooth: [],enabled: -1,id: 'Fire-Tablet10W',type: 'IP',hasMAC: [ 'cc:9e:a2:e9:21:77', '04:cf:8c:af:f7:8e' ],ipVendor: 'Amazon Tech Inc',rip: [ '192.168.178.36' ],lasthere: '2022-02-23T20:52:59.716Z'} radar2.0 2022-02-23 21:58:49.995 info Init item Fritzrepeater with {name: 'Fritzrepeater',bluetooth: [],enabled: -1,id: 'Fritzrepeater',type: 'IP',hasMAC: [ 'f6:b0:14:04:4b:73' ],ipVendor: 'N/A',rip: [ '192.168.178.122' ],lasthere: '2022-01-25T16:53:01.246Z'} radar2.0 2022-02-23 21:58:43.602 info Init item HP-Drucker with {name: 'HP-Drucker',ip: [ '192.168.178.70' ],bluetooth: [],enabled: -1,id: 'HP-Drucker',type: 'printer',hasMAC: [ '18:60:24:30:ad:85' ],ipVendor: 'Hewlett Packard',lasthere: '2022-01-23T10:32:11.729Z'} radar2.0 2022-02-23 21:58:43.461 info Init item Kinoserver with {name: 'Kinoserver',bluetooth: [],enabled: -1,id: 'Kinoserver',type: 'IP',hasMAC: [ '70:85:c2:36:f3:a7' ],ipVendor: 'ASRock Incorporation',rip: [ '192.168.178.100' ],lasthere: '2022-01-28T20:24:38.122Z'} radar2.0 2022-02-23 21:58:37.161 info Init item ECB- with {name: 'ECB-',ip: [ 'USD', 'RUB', 'GBP' ],bluetooth: [],enabled: -1,id: 'ECB',type: 'ECB'} radar2.0 2022-02-23 21:58:37.128 info Init item Ich- with {name: 'Ich-',bluetooth: [],enabled: -1,id: 'Ich',type: 'IP',rip: [ '127.0.0.1', '::1' ],lasthere: '2022-02-23T20:57:50.770Z'} radar2.0 2022-02-23 21:58:36.935 info Will try to scan BT devices: hci0 00:1A:7D:DA:71:0F radar2.0 2022-02-23 21:58:36.880 warn Adapter not running as root or iobroker has no sudo right, cannot use arp-scan! radar2.0 2022-02-23 21:58:36.805 info Connected with '0.0.0.0' for DHCP Scan radar2.0 2022-02-23 21:58:36.757 info arp-scan will use the following interfaces: [ 'enp3s0' ] radar2.0 2022-02-23 21:58:36.699 warn Neither hcitool nor noble available to scan Bluetooth! radar2.0 2022-02-23 21:58:36.697 warn Noble not available, Error: Error: The module '/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 72. This version of Node.js requiresNODE_MODULE_VERSION 83. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).at Object.Module._extensions..node (internal/modules/cjs/loader.js:1144:18)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12)at Module.require (internal/modules/cjs/loader.js:974:19)at require (internal/modules/cjs/helpers.js:101:18)at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.radar2/node_modules/@abandonware/bluetooth-hci-socket/lib/native.js:6:15)at Module._compile (internal/modules/cjs/loader.js:1085:14)at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)at Module.load (internal/modules/cjs/loader.js:950:32)at Function.Module._load (internal/modules/cjs/loader.js:790:12) {code: 'ERR_DLOPEN_FAILED'} radar2.0 2022-02-23 21:58:36.173 info Will use l2Ping for BT scans. radar2.0 2022-02-23 21:58:36.134 info radar2 initialization started... radar2.0 2022-02-23 21:58:35.691 info starting. Version 2.0.3 in /opt/iobroker/node_modules/iobroker.radar2, node: v14.19.0, js-controller: 3.3.22Mach mal einen
iobroker fixUnd dann würde ich den Adapter komplett neuinstallieren. Dann müsste sich das einrenken, denke ich.
-
Mach mal einen
iobroker fixUnd dann würde ich den Adapter komplett neuinstallieren. Dann müsste sich das einrenken, denke ich.
@thomas-braun
ok danke mach ich melde mich dann wieder -
@Thomas-Braun
Sieht alles gut aus danke
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden365
Online32.9k
Benutzer83.0k
Themen1.3m
Beiträge