Conbee 2 Stick Phoscon App
-
@fa-bio
das habe ich auch schon versucht - es wird nix gefunden -
@jwedenig ja dann weiß ich nicht weiter. steckt er direkt im Raspi oder hast du da auch eine Verlängerung dran?
-
@fa-bio
direkt -
@jwedenig da kann es zu Störungen kommen.
-
@fa-bio
mit Verlängerung ging es auch nicht, leider -
@jwedenig also ich würde den sticke erst mal auswerfen dann den Raspi neu starten und dann mit Kabel den Stick wieder dran stecken.
-
@fa-bio
leider auch nix gebracht, ich gebe auf für heut! Danke trotzdem -
@jwedenig
Die Ausgabe ist nicht vollständig.sudo systemctl restart deconzUnd schau mal in das syslog rein.
-
@jwedenig ich habe hier was gefunden könnte das sein?
https://forum.iobroker.net/topic/26130/phoscon-app-findet-gateway-nicht -
hm, die Ausgabe endet aber so, mit welchem Befehl ins Syslog?
-
-
jwedenig@iobroker2021:~ $ dmesg -T [Sa Okt 9 21:46:36 2021] Booting Linux on physical CPU 0x0 [Sa Okt 9 21:46:36 2021] Linux version 5.10.17-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1421 SMP Thu May 27 14:00:13 BST 2021 [Sa Okt 9 21:46:36 2021] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [Sa Okt 9 21:46:36 2021] CPU: div instructions available: patching division code [Sa Okt 9 21:46:36 2021] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [Sa Okt 9 21:46:36 2021] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [Sa Okt 9 21:46:36 2021] Memory policy: Data cache writealloc [Sa Okt 9 21:46:36 2021] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [Sa Okt 9 21:46:36 2021] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Sa Okt 9 21:46:36 2021] Zone ranges: [Sa Okt 9 21:46:36 2021] DMA [mem 0x0000000000000000-0x000000002fffffff] [Sa Okt 9 21:46:36 2021] Normal empty [Sa Okt 9 21:46:36 2021] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [Sa Okt 9 21:46:36 2021] Movable zone start for each node [Sa Okt 9 21:46:36 2021] Early memory node ranges [Sa Okt 9 21:46:36 2021] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [Sa Okt 9 21:46:36 2021] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [Sa Okt 9 21:46:36 2021] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [Sa Okt 9 21:46:36 2021] On node 0 totalpages: 1012736 [Sa Okt 9 21:46:36 2021] DMA zone: 2304 pages used for memmap [Sa Okt 9 21:46:36 2021] DMA zone: 0 pages reserved [Sa Okt 9 21:46:36 2021] DMA zone: 196608 pages, LIFO batch:63 [Sa Okt 9 21:46:36 2021] HighMem zone: 816128 pages, LIFO batch:63 [Sa Okt 9 21:46:36 2021] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 [Sa Okt 9 21:46:36 2021] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 [Sa Okt 9 21:46:36 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Sa Okt 9 21:46:36 2021] Built 1 zonelists, mobility grouping on. Total pages: 1010432 [Sa Okt 9 21:46:36 2021] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:50:1C:78 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=27528393-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Sa Okt 9 21:46:36 2021] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [Sa Okt 9 21:46:36 2021] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [Sa Okt 9 21:46:36 2021] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [Sa Okt 9 21:46:36 2021] mem auto-init: stack:off, heap alloc:off, heap free:off [Sa Okt 9 21:46:36 2021] software IO TLB: mapped [mem 0x0000000017cc0000-0x000000001bcc0000] (64MB) [Sa Okt 9 21:46:36 2021] Memory: 3654940K/4050944K available (10240K kernel code, 1358K rwdata, 3160K rodata, 2048K init, 890K bss, 133860K reserved, 262144K cma-reserved, 3264512K highmem) [Sa Okt 9 21:46:36 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Sa Okt 9 21:46:36 2021] ftrace: allocating 33942 entries in 67 pages [Sa Okt 9 21:46:36 2021] ftrace: allocated 67 pages with 3 groups [Sa Okt 9 21:46:36 2021] rcu: Hierarchical RCU implementation. [Sa Okt 9 21:46:36 2021] Rude variant of Tasks RCU enabled. [Sa Okt 9 21:46:36 2021] Tracing variant of Tasks RCU enabled. [Sa Okt 9 21:46:36 2021] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [Sa Okt 9 21:46:36 2021] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [Sa Okt 9 21:46:36 2021] GIC: Using split EOI/Deactivate mode [Sa Okt 9 21:46:36 2021] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0 [Sa Okt 9 21:46:36 2021] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [Sa Okt 9 21:46:36 2021] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [Sa Okt 9 21:46:36 2021] bcm2835: system timer (irq = 25) [Sa Okt 9 21:46:36 2021] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [Sa Okt 9 21:46:36 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [Sa Okt 9 21:46:36 2021] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [Sa Okt 9 21:46:36 2021] Switching to timer-based delay loop, resolution 18ns [Sa Okt 9 21:46:36 2021] Console: colour dummy device 80x30 [Sa Okt 9 21:46:36 2021] printk: console [tty1] enabled [Sa Okt 9 21:46:36 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [Sa Okt 9 21:46:36 2021] pid_max: default: 32768 minimum: 301 [Sa Okt 9 21:46:36 2021] LSM: Security Framework initializing [Sa Okt 9 21:46:36 2021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Sa Okt 9 21:46:36 2021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Sa Okt 9 21:46:36 2021] Disabling memory control group subsystem [Sa Okt 9 21:46:36 2021] CPU: Testing write buffer coherency: ok [Sa Okt 9 21:46:36 2021] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [Sa Okt 9 21:46:36 2021] Setting up static identity map for 0x200000 - 0x20003c [Sa Okt 9 21:46:36 2021] rcu: Hierarchical SRCU implementation. [Sa Okt 9 21:46:36 2021] smp: Bringing up secondary CPUs ... [Sa Okt 9 21:46:36 2021] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [Sa Okt 9 21:46:36 2021] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [Sa Okt 9 21:46:36 2021] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [Sa Okt 9 21:46:36 2021] smp: Brought up 1 node, 4 CPUs [Sa Okt 9 21:46:36 2021] SMP: Total of 4 processors activated (432.00 BogoMIPS). [Sa Okt 9 21:46:36 2021] CPU: All CPU(s) started in HYP mode. [Sa Okt 9 21:46:36 2021] CPU: Virtualization extensions available. [Sa Okt 9 21:46:36 2021] devtmpfs: initialized [Sa Okt 9 21:46:36 2021] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [Sa Okt 9 21:46:36 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [Sa Okt 9 21:46:36 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Sa Okt 9 21:46:36 2021] pinctrl core: initialized pinctrl subsystem [Sa Okt 9 21:46:36 2021] NET: Registered protocol family 16 [Sa Okt 9 21:46:36 2021] DMA: preallocated 1024 KiB pool for atomic coherent allocations [Sa Okt 9 21:46:36 2021] audit: initializing netlink subsys (disabled) [Sa Okt 9 21:46:36 2021] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [Sa Okt 9 21:46:36 2021] thermal_sys: Registered thermal governor 'step_wise' [Sa Okt 9 21:46:36 2021] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [Sa Okt 9 21:46:36 2021] hw-breakpoint: maximum watchpoint size is 8 bytes. [Sa Okt 9 21:46:36 2021] Serial: AMBA PL011 UART driver [Sa Okt 9 21:46:36 2021] bcm2835-mbox fe00b880.mailbox: mailbox enabled [Sa Okt 9 21:46:36 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-05-27T14:02:15, variant start [Sa Okt 9 21:46:36 2021] raspberrypi-firmware soc:firmware: Firmware hash is 7d9a298cda813f747b51fe17e1e417e7bf5ca94d [Sa Okt 9 21:46:36 2021] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [Sa Okt 9 21:46:36 2021] vgaarb: loaded [Sa Okt 9 21:46:36 2021] SCSI subsystem initialized [Sa Okt 9 21:46:36 2021] usbcore: registered new interface driver usbfs [Sa Okt 9 21:46:36 2021] usbcore: registered new interface driver hub [Sa Okt 9 21:46:36 2021] usbcore: registered new device driver usb [Sa Okt 9 21:46:36 2021] usb_phy_generic phy: supply vcc not found, using dummy regulator [Sa Okt 9 21:46:36 2021] clocksource: Switched to clocksource arch_sys_counter [Sa Okt 9 21:46:37 2021] VFS: Disk quotas dquot_6.6.0 [Sa Okt 9 21:46:37 2021] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [Sa Okt 9 21:46:37 2021] FS-Cache: Loaded [Sa Okt 9 21:46:37 2021] CacheFiles: Loaded [Sa Okt 9 21:46:37 2021] NET: Registered protocol family 2 [Sa Okt 9 21:46:37 2021] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [Sa Okt 9 21:46:37 2021] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [Sa Okt 9 21:46:37 2021] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [Sa Okt 9 21:46:37 2021] TCP: Hash tables configured (established 8192 bind 8192) [Sa Okt 9 21:46:37 2021] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [Sa Okt 9 21:46:37 2021] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [Sa Okt 9 21:46:37 2021] NET: Registered protocol family 1 [Sa Okt 9 21:46:37 2021] RPC: Registered named UNIX socket transport module. [Sa Okt 9 21:46:37 2021] RPC: Registered udp transport module. [Sa Okt 9 21:46:37 2021] RPC: Registered tcp transport module. [Sa Okt 9 21:46:37 2021] RPC: Registered tcp NFSv4.1 backchannel transport module. [Sa Okt 9 21:46:37 2021] PCI: CLS 0 bytes, default 64 [Sa Okt 9 21:46:37 2021] Initialise system trusted keyrings [Sa Okt 9 21:46:37 2021] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [Sa Okt 9 21:46:37 2021] zbud: loaded [Sa Okt 9 21:46:37 2021] FS-Cache: Netfs 'nfs' registered for caching [Sa Okt 9 21:46:37 2021] NFS: Registering the id_resolver key type [Sa Okt 9 21:46:37 2021] Key type id_resolver registered [Sa Okt 9 21:46:37 2021] Key type id_legacy registered [Sa Okt 9 21:46:37 2021] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [Sa Okt 9 21:46:37 2021] Key type asymmetric registered [Sa Okt 9 21:46:37 2021] Asymmetric key parser 'x509' registered [Sa Okt 9 21:46:37 2021] bounce: pool size: 64 pages [Sa Okt 9 21:46:37 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [Sa Okt 9 21:46:37 2021] io scheduler mq-deadline registered [Sa Okt 9 21:46:37 2021] io scheduler kyber registered [Sa Okt 9 21:46:37 2021] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [Sa Okt 9 21:46:37 2021] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [Sa Okt 9 21:46:37 2021] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [Sa Okt 9 21:46:37 2021] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [Sa Okt 9 21:46:37 2021] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [Sa Okt 9 21:46:37 2021] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [Sa Okt 9 21:46:37 2021] pci_bus 0000:00: root bus resource [bus 00-ff] [Sa Okt 9 21:46:37 2021] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [Sa Okt 9 21:46:37 2021] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [Sa Okt 9 21:46:37 2021] pci 0000:00:00.0: PME# supported from D0 D3hot [Sa Okt 9 21:46:37 2021] PCI: bus0: Fast back to back transfers disabled [Sa Okt 9 21:46:37 2021] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [Sa Okt 9 21:46:37 2021] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [Sa Okt 9 21:46:37 2021] pci 0000:01:00.0: PME# supported from D0 D3cold [Sa Okt 9 21:46:37 2021] PCI: bus1: Fast back to back transfers disabled [Sa Okt 9 21:46:37 2021] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [Sa Okt 9 21:46:37 2021] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [Sa Okt 9 21:46:37 2021] pci 0000:00:00.0: PCI bridge to [bus 01] [Sa Okt 9 21:46:37 2021] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [Sa Okt 9 21:46:37 2021] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [Sa Okt 9 21:46:37 2021] pcieport 0000:00:00.0: PME: Signaling with IRQ 62 [Sa Okt 9 21:46:37 2021] iproc-rng200 fe104000.rng: hwrng registered [Sa Okt 9 21:46:37 2021] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [Sa Okt 9 21:46:37 2021] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [Sa Okt 9 21:46:37 2021] brd: module loaded [Sa Okt 9 21:46:37 2021] loop: module loaded [Sa Okt 9 21:46:37 2021] Loading iSCSI transport class v2.0-870. [Sa Okt 9 21:46:37 2021] libphy: Fixed MDIO Bus: probed [Sa Okt 9 21:46:37 2021] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [Sa Okt 9 21:46:37 2021] libphy: bcmgenet MII bus: probed [Sa Okt 9 21:46:37 2021] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [Sa Okt 9 21:46:37 2021] usbcore: registered new interface driver r8152 [Sa Okt 9 21:46:37 2021] usbcore: registered new interface driver lan78xx [Sa Okt 9 21:46:37 2021] usbcore: registered new interface driver smsc95xx [Sa Okt 9 21:46:37 2021] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [Sa Okt 9 21:46:37 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Sa Okt 9 21:46:37 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [Sa Okt 9 21:46:37 2021] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890 [Sa Okt 9 21:46:37 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [Sa Okt 9 21:46:37 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Sa Okt 9 21:46:37 2021] usb usb1: Product: xHCI Host Controller [Sa Okt 9 21:46:37 2021] usb usb1: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd [Sa Okt 9 21:46:37 2021] usb usb1: SerialNumber: 0000:01:00.0 [Sa Okt 9 21:46:37 2021] hub 1-0:1.0: USB hub found [Sa Okt 9 21:46:37 2021] hub 1-0:1.0: 1 port detected [Sa Okt 9 21:46:37 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Sa Okt 9 21:46:37 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [Sa Okt 9 21:46:37 2021] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [Sa Okt 9 21:46:37 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [Sa Okt 9 21:46:37 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Sa Okt 9 21:46:37 2021] usb usb2: Product: xHCI Host Controller [Sa Okt 9 21:46:37 2021] usb usb2: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd [Sa Okt 9 21:46:37 2021] usb usb2: SerialNumber: 0000:01:00.0 [Sa Okt 9 21:46:37 2021] hub 2-0:1.0: USB hub found [Sa Okt 9 21:46:37 2021] hub 2-0:1.0: 4 ports detected [Sa Okt 9 21:46:37 2021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [Sa Okt 9 21:46:37 2021] dwc_otg: FIQ enabled [Sa Okt 9 21:46:37 2021] dwc_otg: NAK holdoff enabled [Sa Okt 9 21:46:37 2021] dwc_otg: FIQ split-transaction FSM enabled [Sa Okt 9 21:46:37 2021] Module dwc_common_port init [Sa Okt 9 21:46:37 2021] usbcore: registered new interface driver uas [Sa Okt 9 21:46:37 2021] usbcore: registered new interface driver usb-storage [Sa Okt 9 21:46:37 2021] mousedev: PS/2 mouse device common for all mice [Sa Okt 9 21:46:37 2021] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [Sa Okt 9 21:46:37 2021] sdhci: Secure Digital Host Controller Interface driver [Sa Okt 9 21:46:37 2021] sdhci: Copyright(c) Pierre Ossman [Sa Okt 9 21:46:37 2021] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [Sa Okt 9 21:46:37 2021] sdhci-pltfm: SDHCI platform and OF driver helper [Sa Okt 9 21:46:37 2021] ledtrig-cpu: registered to indicate activity on CPUs [Sa Okt 9 21:46:37 2021] hid: raw HID events driver (C) Jiri Kosina [Sa Okt 9 21:46:37 2021] usbcore: registered new interface driver usbhid [Sa Okt 9 21:46:37 2021] usbhid: USB HID core driver [Sa Okt 9 21:46:37 2021] Initializing XFRM netlink socket [Sa Okt 9 21:46:37 2021] NET: Registered protocol family 17 [Sa Okt 9 21:46:37 2021] Key type dns_resolver registered [Sa Okt 9 21:46:37 2021] Registering SWP/SWPB emulation handler [Sa Okt 9 21:46:37 2021] registered taskstats version 1 [Sa Okt 9 21:46:37 2021] Loading compiled-in X.509 certificates [Sa Okt 9 21:46:37 2021] Key type ._fscrypt registered [Sa Okt 9 21:46:37 2021] Key type .fscrypt registered [Sa Okt 9 21:46:37 2021] Key type fscrypt-provisioning registered [Sa Okt 9 21:46:37 2021] uart-pl011 fe201000.serial: there is not valid maps for state default [Sa Okt 9 21:46:37 2021] uart-pl011 fe201000.serial: cts_event_workaround enabled [Sa Okt 9 21:46:37 2021] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [Sa Okt 9 21:46:37 2021] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [Sa Okt 9 21:46:37 2021] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [Sa Okt 9 21:46:37 2021] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [Sa Okt 9 21:46:37 2021] of_cfs_init [Sa Okt 9 21:46:37 2021] of_cfs_init: OK [Sa Okt 9 21:46:37 2021] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [Sa Okt 9 21:46:37 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Sa Okt 9 21:46:37 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Sa Okt 9 21:46:37 2021] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [Sa Okt 9 21:46:37 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Sa Okt 9 21:46:37 2021] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [Sa Okt 9 21:46:37 2021] Waiting for root device PARTUUID=27528393-02... [Sa Okt 9 21:46:37 2021] random: fast init done [Sa Okt 9 21:46:37 2021] mmc1: new high speed SDIO card at address 0001 [Sa Okt 9 21:46:37 2021] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [Sa Okt 9 21:46:37 2021] mmcblk0: mmc0:aaaa SE32G 29.7 GiB [Sa Okt 9 21:46:37 2021] mmcblk0: p1 p2 [Sa Okt 9 21:46:37 2021] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Sa Okt 9 21:46:37 2021] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sa Okt 9 21:46:37 2021] devtmpfs: mounted [Sa Okt 9 21:46:37 2021] Freeing unused kernel memory: 2048K [Sa Okt 9 21:46:37 2021] Run /sbin/init as init process [Sa Okt 9 21:46:37 2021] with arguments: [Sa Okt 9 21:46:37 2021] /sbin/init [Sa Okt 9 21:46:37 2021] with environment: [Sa Okt 9 21:46:37 2021] HOME=/ [Sa Okt 9 21:46:37 2021] TERM=linux [Sa Okt 9 21:46:37 2021] usb 1-1: new high-speed USB device number 2 using xhci_hcd [Sa Okt 9 21:46:37 2021] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [Sa Okt 9 21:46:37 2021] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [Sa Okt 9 21:46:37 2021] usb 1-1: Product: USB2.0 Hub [Sa Okt 9 21:46:37 2021] hub 1-1:1.0: USB hub found [Sa Okt 9 21:46:37 2021] hub 1-1:1.0: 4 ports detected [Sa Okt 9 21:46:38 2021] systemd[1]: System time before build time, advancing clock. [Sa Okt 9 21:46:38 2021] NET: Registered protocol family 10 [Sa Okt 9 21:46:38 2021] Segment Routing with IPv6 [Sa Okt 9 21:46:38 2021] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [Sa Okt 9 21:46:38 2021] systemd[1]: Detected architecture arm. [Sa Okt 9 21:46:38 2021] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd [Sa Okt 9 21:46:38 2021] systemd[1]: Set hostname to <iobroker2021>. [Sa Okt 9 21:46:38 2021] usb 1-1.4: New USB device found, idVendor=0451, idProduct=16a8, bcdDevice= 0.09 [Sa Okt 9 21:46:38 2021] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Sa Okt 9 21:46:38 2021] usb 1-1.4: Product: TI CC2531 USB CDC [Sa Okt 9 21:46:38 2021] usb 1-1.4: Manufacturer: Texas Instruments [Sa Okt 9 21:46:38 2021] usb 1-1.4: SerialNumber: __0X00124B000BE876FE [Sa Okt 9 21:46:39 2021] random: systemd: uninitialized urandom read (16 bytes read) [Sa Okt 9 21:46:39 2021] random: systemd: uninitialized urandom read (16 bytes read) [Sa Okt 9 21:46:39 2021] systemd[1]: Created slice system-systemd\x2dfsck.slice. [Sa Okt 9 21:46:39 2021] random: systemd: uninitialized urandom read (16 bytes read) [Sa Okt 9 21:46:39 2021] systemd[1]: Listening on udev Kernel Socket. [Sa Okt 9 21:46:39 2021] systemd[1]: Listening on Journal Socket (/dev/log). [Sa Okt 9 21:46:39 2021] systemd[1]: Created slice User and Session Slice. [Sa Okt 9 21:46:39 2021] systemd[1]: Listening on Syslog Socket. [Sa Okt 9 21:46:39 2021] systemd[1]: Created slice system-getty.slice. [Sa Okt 9 21:46:39 2021] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Sa Okt 9 21:46:39 2021] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [Sa Okt 9 21:46:39 2021] systemd-journald[108]: Received request to flush runtime journal from PID 1 [Sa Okt 9 21:46:40 2021] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [Sa Okt 9 21:46:40 2021] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [Sa Okt 9 21:46:40 2021] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [Sa Okt 9 21:46:40 2021] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [Sa Okt 9 21:46:40 2021] mc: Linux media interface: v0.10 [Sa Okt 9 21:46:40 2021] videodev: Linux video capture interface: v2.00 [Sa Okt 9 21:46:40 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Sa Okt 9 21:46:40 2021] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [Sa Okt 9 21:46:40 2021] [vc_sm_connected_init]: start [Sa Okt 9 21:46:40 2021] [vc_sm_connected_init]: installed successfully [Sa Okt 9 21:46:40 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Sa Okt 9 21:46:40 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Sa Okt 9 21:46:40 2021] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [Sa Okt 9 21:46:40 2021] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [Sa Okt 9 21:46:40 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Sa Okt 9 21:46:40 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [Sa Okt 9 21:46:40 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [Sa Okt 9 21:46:40 2021] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [Sa Okt 9 21:46:40 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [Sa Okt 9 21:46:40 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [Sa Okt 9 21:46:40 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [Sa Okt 9 21:46:40 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [Sa Okt 9 21:46:40 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Sa Okt 9 21:46:40 2021] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [Sa Okt 9 21:46:40 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [Sa Okt 9 21:46:40 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [Sa Okt 9 21:46:40 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [Sa Okt 9 21:46:40 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [Sa Okt 9 21:46:40 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [Sa Okt 9 21:46:40 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [Sa Okt 9 21:46:40 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [Sa Okt 9 21:46:40 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [Sa Okt 9 21:46:40 2021] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [Sa Okt 9 21:46:40 2021] bcm2835_audio bcm2835_audio: card created with 8 channels [Sa Okt 9 21:46:40 2021] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [Sa Okt 9 21:46:40 2021] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device [Sa Okt 9 21:46:40 2021] usbcore: registered new interface driver cdc_acm [Sa Okt 9 21:46:40 2021] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [Sa Okt 9 21:46:40 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Sa Okt 9 21:46:40 2021] [drm] No displays found. Consider forcing hotplug if HDMI is attached [Sa Okt 9 21:46:40 2021] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [Sa Okt 9 21:46:40 2021] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [Sa Okt 9 21:46:41 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Sa Okt 9 21:46:41 2021] brcmfmac: F1 signature read @0x18000000=0x15264345 [Sa Okt 9 21:46:41 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Sa Okt 9 21:46:41 2021] usbcore: registered new interface driver brcmfmac [Sa Okt 9 21:46:41 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [Sa Okt 9 21:46:41 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Sa Okt 9 21:46:41 2021] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [Sa Okt 9 21:46:43 2021] random: crng init done [Sa Okt 9 21:46:43 2021] random: 7 urandom warning(s) missed due to ratelimiting [Sa Okt 9 21:46:43 2021] 8021q: 802.1Q VLAN Support v1.8 [Sa Okt 9 21:46:43 2021] uart-pl011 fe201000.serial: no DMA platform data [Sa Okt 9 21:46:43 2021] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [Sa Okt 9 21:46:43 2021] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [Sa Okt 9 21:46:44 2021] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [Sa Okt 9 21:46:44 2021] bcmgenet fd580000.ethernet eth0: Link is Down [Sa Okt 9 21:46:46 2021] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [Sa Okt 9 21:46:46 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [Sa Okt 9 21:46:47 2021] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [Sa Okt 9 21:46:50 2021] Bluetooth: Core ver 2.22 [Sa Okt 9 21:46:50 2021] NET: Registered protocol family 31 [Sa Okt 9 21:46:50 2021] Bluetooth: HCI device and connection manager initialized [Sa Okt 9 21:46:50 2021] Bluetooth: HCI socket layer initialized [Sa Okt 9 21:46:50 2021] Bluetooth: L2CAP socket layer initialized [Sa Okt 9 21:46:50 2021] Bluetooth: SCO socket layer initialized [Sa Okt 9 21:46:50 2021] Bluetooth: HCI UART driver ver 2.3 [Sa Okt 9 21:46:50 2021] Bluetooth: HCI UART protocol H4 registered [Sa Okt 9 21:46:50 2021] Bluetooth: HCI UART protocol Three-wire (H5) registered [Sa Okt 9 21:46:50 2021] Bluetooth: HCI UART protocol Broadcom registered [Sa Okt 9 21:46:50 2021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Sa Okt 9 21:46:50 2021] Bluetooth: BNEP filters: protocol multicast [Sa Okt 9 21:46:50 2021] Bluetooth: BNEP socket layer initialized [Sa Okt 9 21:49:39 2021] usb 1-1.2: new full-speed USB device number 4 using xhci_hcd [Sa Okt 9 21:49:39 2021] usb 1-1.2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [Sa Okt 9 21:49:39 2021] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Sa Okt 9 21:49:39 2021] usb 1-1.2: Product: ConBee II [Sa Okt 9 21:49:39 2021] usb 1-1.2: Manufacturer: dresden elektronik ingenieurtechnik GmbH [Sa Okt 9 21:49:39 2021] usb 1-1.2: SerialNumber: DE2450739 [Sa Okt 9 21:49:39 2021] cdc_acm 1-1.2:1.0: ttyACM1: USB ACM device [Sa Okt 9 21:49:43 2021] usb 1-1.2: USB disconnect, device number 4 [Sa Okt 9 21:49:43 2021] usb 1-1.2: new full-speed USB device number 5 using xhci_hcd [Sa Okt 9 21:49:43 2021] usb 1-1.2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [Sa Okt 9 21:49:43 2021] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Sa Okt 9 21:49:43 2021] usb 1-1.2: Product: ConBee II [Sa Okt 9 21:49:43 2021] usb 1-1.2: Manufacturer: dresden elektronik ingenieurtechnik GmbH [Sa Okt 9 21:49:43 2021] usb 1-1.2: SerialNumber: DE2450739 [Sa Okt 9 21:49:43 2021] cdc_acm 1-1.2:1.0: ttyACM1: USB ACM device -
tail: '/var/log/syslog' kann nicht zum Lesen geöffnet werden: Keine Berechtigung tail: Keine Dateien mehr übrig -
@jwedenig
Schmeiß den anderen ZigBee-Stick raus.
Und den Modem Treiber auch. Steht glaube ich irgendwo auf der Phoscon-Seite, wie das geht. -
Stick ist mal draussen - Modem Treiber löschen? Keine Ahnung, ich suche mal
-
@jwedenig
wenn dein apache auf port 80 lauscht, dann schadet es nicht den http port von deconz gui zu ändern.
also mit --http-port=8080 zum Beispiel. -
@e-s
ok, kannst du mir sagen, wie ich das mache? -
@jwedenig
du musst dazu deine deconz.service von systemd bearbeiten, wie das bei dir geht weiß ich nicht.
Vielleicht kann dir das @Thomas-Braun sagen -
Habe nun den Port auf 8090 geändert, nun habe ich keine Verbindung:-(
-
Hast du im Deconz Adapter auch den Port geändert ?
Und vielleicht nach der Aktion nen neuen API Key erstellen lassen .Edit : Läuft eventuell schon was anderes auf dem Port?
Wenn nein , musst du im Browser die IP des Gerätes wo phoscon drauf installiert eingeben plus portnumner.
Als Beispiel : 192.168.178.10:8090
