Telegramm Adapter

haselchen

Benutzt du eine Sd Karte?
Wenn ja , klingt es so als wenn sie kaputt ist.
I/O Error.
Vorschlag: neue Sd Karte und Backup einspielen.

Moby Dick

@haselchen Dankeschön für die sehr schnell Antwort
Ja- Ich benutze eine SD Karte
Kann man die SD Karte Prüfen bzw. warum lauft das andre alle einwandfrei?

haselchen

@moby-dick

Die ganzen "Prüfbefehle" für deine SD Karte kann Dir @Thomas-Braun runterbeten :)

Thomas Braun

@moby-dick

dmesg -T | grep -i ext4

Wenn da mehr als diese vier Zeilen auftauchen:

echad@chet:/opt/iobroker $ dmesg -T | grep -i ext4
[Fr Mai 14 23:58:42 2021] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:0B:F7:93 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=tty1 root=PARTUUID=52ef292e-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Fr Mai 14 23:58:43 2021] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Fr Mai 14 23:58:43 2021] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Fr Mai 14 23:58:45 2021] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

bitte den kompletten Output von

dmesg -T

Moby Dick

[Sa Mai 15 21:56:16 2021] Booting Linux on physical CPU 0xf00
[Sa Mai 15 21:56:16 2021] Linux version 5.4.83-v7+ (dom@buildbot) (gcc version 8.4.0 (Ubuntu/Linaro 8.4.0-3ubuntu1)) #1379 SMP Mon Dec 14 13:08:57 GMT 2020
[Sa Mai 15 21:56:16 2021] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[Sa Mai 15 21:56:16 2021] CPU: div instructions available: patching division code
[Sa Mai 15 21:56:16 2021] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Sa Mai 15 21:56:16 2021] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1
[Sa Mai 15 21:56:16 2021] Memory policy: Data cache writealloc
[Sa Mai 15 21:56:16 2021] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB
[Sa Mai 15 21:56:16 2021] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[Sa Mai 15 21:56:16 2021] On node 0 totalpages: 242688
[Sa Mai 15 21:56:16 2021] Normal zone: 2133 pages used for memmap
[Sa Mai 15 21:56:16 2021] Normal zone: 0 pages reserved
[Sa Mai 15 21:56:16 2021] Normal zone: 242688 pages, LIFO batch:63
[Sa Mai 15 21:56:16 2021] percpu: Embedded 20 pages/cpu s49740 r8192 d23988 u81920
[Sa Mai 15 21:56:16 2021] pcpu-alloc: s49740 r8192 d23988 u81920 alloc=20*4096
[Sa Mai 15 21:56:16 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Sa Mai 15 21:56:16 2021] Built 1 zonelists, mobility grouping on. Total pages: 240555
[Sa Mai 15 21:56:16 2021] Kernel command line: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=9016b890-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[Sa Mai 15 21:56:16 2021] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[Sa Mai 15 21:56:16 2021] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[Sa Mai 15 21:56:16 2021] mem auto-init: stack:off, heap alloc:off, heap free:off
[Sa Mai 15 21:56:16 2021] Memory: 880488K/970752K available (9216K kernel code, 698K rwdata, 2608K rodata, 1024K init, 827K bss, 24728K reserved, 65536K cma-reserved)
[Sa Mai 15 21:56:16 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Sa Mai 15 21:56:16 2021] ftrace: allocating 29205 entries in 58 pages
[Sa Mai 15 21:56:16 2021] rcu: Hierarchical RCU implementation.
[Sa Mai 15 21:56:16 2021] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[Sa Mai 15 21:56:16 2021] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Sa Mai 15 21:56:16 2021] random: get_random_bytes called from start_kernel+0x324/0x4f8 with crng_init=0
[Sa Mai 15 21:56:16 2021] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Sa Mai 15 21:56:16 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Sa Mai 15 21:56:16 2021] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Sa Mai 15 21:56:16 2021] Switching to timer-based delay loop, resolution 52ns
[Sa Mai 15 21:56:16 2021] Console: colour dummy device 80x30
[Sa Mai 15 21:56:16 2021] printk: console [tty1] enabled
[Sa Mai 15 21:56:16 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Sa Mai 15 21:56:16 2021] pid_max: default: 32768 minimum: 301
[Sa Mai 15 21:56:16 2021] LSM: Security Framework initializing
[Sa Mai 15 21:56:16 2021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[Sa Mai 15 21:56:16 2021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[Sa Mai 15 21:56:16 2021] Disabling memory control group subsystem
[Sa Mai 15 21:56:16 2021] CPU: Testing write buffer coherency: ok
[Sa Mai 15 21:56:16 2021] CPU0: update cpu_capacity 1024
[Sa Mai 15 21:56:16 2021] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[Sa Mai 15 21:56:16 2021] Setting up static identity map for 0x100000 - 0x10003c
[Sa Mai 15 21:56:16 2021] rcu: Hierarchical SRCU implementation.
[Sa Mai 15 21:56:16 2021] smp: Bringing up secondary CPUs ...
[Sa Mai 15 21:56:16 2021] CPU1: update cpu_capacity 1024
[Sa Mai 15 21:56:16 2021] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[Sa Mai 15 21:56:16 2021] CPU2: update cpu_capacity 1024
[Sa Mai 15 21:56:16 2021] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[Sa Mai 15 21:56:16 2021] CPU3: update cpu_capacity 1024
[Sa Mai 15 21:56:16 2021] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[Sa Mai 15 21:56:16 2021] smp: Brought up 1 node, 4 CPUs
[Sa Mai 15 21:56:16 2021] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Sa Mai 15 21:56:16 2021] CPU: All CPU(s) started in HYP mode.
[Sa Mai 15 21:56:16 2021] CPU: Virtualization extensions available.
[Sa Mai 15 21:56:16 2021] devtmpfs: initialized
[Sa Mai 15 21:56:16 2021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[Sa Mai 15 21:56:16 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Sa Mai 15 21:56:16 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[Sa Mai 15 21:56:16 2021] pinctrl core: initialized pinctrl subsystem
[Sa Mai 15 21:56:16 2021] NET: Registered protocol family 16
[Sa Mai 15 21:56:16 2021] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Sa Mai 15 21:56:16 2021] audit: initializing netlink subsys (disabled)
[Sa Mai 15 21:56:16 2021] audit: type=2000 audit(0.050:1): state=initialized audit_enabled=0 res=1
[Sa Mai 15 21:56:16 2021] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Sa Mai 15 21:56:16 2021] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Sa Mai 15 21:56:16 2021] Serial: AMBA PL011 UART driver
[Sa Mai 15 21:56:16 2021] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Sa Mai 15 21:56:16 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-12-15 14:49, variant start
[Sa Mai 15 21:56:16 2021] raspberrypi-firmware soc:firmware: Firmware hash is 4b4aff21f72c5b9ba39d83c7b0f8fa910a6ef99b
[Sa Mai 15 21:56:16 2021] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[Sa Mai 15 21:56:16 2021] SCSI subsystem initialized
[Sa Mai 15 21:56:16 2021] usbcore: registered new interface driver usbfs
[Sa Mai 15 21:56:16 2021] usbcore: registered new interface driver hub
[Sa Mai 15 21:56:16 2021] usbcore: registered new device driver usb
[Sa Mai 15 21:56:16 2021] clocksource: Switched to clocksource arch_sys_counter
[Sa Mai 15 21:56:17 2021] VFS: Disk quotas dquot_6.6.0
[Sa Mai 15 21:56:17 2021] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Sa Mai 15 21:56:17 2021] FS-Cache: Loaded
[Sa Mai 15 21:56:17 2021] CacheFiles: Loaded
[Sa Mai 15 21:56:17 2021] thermal_sys: Registered thermal governor 'step_wise'
[Sa Mai 15 21:56:17 2021] NET: Registered protocol family 2
[Sa Mai 15 21:56:17 2021] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[Sa Mai 15 21:56:17 2021] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[Sa Mai 15 21:56:17 2021] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[Sa Mai 15 21:56:17 2021] TCP: Hash tables configured (established 8192 bind 8192)
[Sa Mai 15 21:56:17 2021] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[Sa Mai 15 21:56:17 2021] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[Sa Mai 15 21:56:17 2021] NET: Registered protocol family 1
[Sa Mai 15 21:56:17 2021] RPC: Registered named UNIX socket transport module.
[Sa Mai 15 21:56:17 2021] RPC: Registered udp transport module.
[Sa Mai 15 21:56:17 2021] RPC: Registered tcp transport module.
[Sa Mai 15 21:56:17 2021] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Sa Mai 15 21:56:17 2021] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[Sa Mai 15 21:56:17 2021] Initialise system trusted keyrings
[Sa Mai 15 21:56:17 2021] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Sa Mai 15 21:56:17 2021] FS-Cache: Netfs 'nfs' registered for caching
[Sa Mai 15 21:56:17 2021] NFS: Registering the id_resolver key type
[Sa Mai 15 21:56:17 2021] Key type id_resolver registered
[Sa Mai 15 21:56:17 2021] Key type id_legacy registered
[Sa Mai 15 21:56:17 2021] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Sa Mai 15 21:56:17 2021] Key type asymmetric registered
[Sa Mai 15 21:56:17 2021] Asymmetric key parser 'x509' registered
[Sa Mai 15 21:56:17 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[Sa Mai 15 21:56:17 2021] io scheduler mq-deadline registered
[Sa Mai 15 21:56:17 2021] io scheduler kyber registered
[Sa Mai 15 21:56:17 2021] bcm2708_fb soc:fb: FB found 1 display(s)
[Sa Mai 15 21:56:17 2021] Console: switching to colour frame buffer device 82x26
[Sa Mai 15 21:56:17 2021] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416
[Sa Mai 15 21:56:17 2021] bcm2835-rng 3f104000.rng: hwrng registered
[Sa Mai 15 21:56:17 2021] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Sa Mai 15 21:56:17 2021] vc-sm: Videocore shared memory driver
[Sa Mai 15 21:56:17 2021] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Sa Mai 15 21:56:17 2021] brd: module loaded
[Sa Mai 15 21:56:17 2021] loop: module loaded
[Sa Mai 15 21:56:17 2021] Loading iSCSI transport class v2.0-870.
[Sa Mai 15 21:56:17 2021] libphy: Fixed MDIO Bus: probed
[Sa Mai 15 21:56:17 2021] usbcore: registered new interface driver lan78xx
[Sa Mai 15 21:56:17 2021] usbcore: registered new interface driver smsc95xx
[Sa Mai 15 21:56:17 2021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Sa Mai 15 21:56:18 2021] Core Release: 2.80a
[Sa Mai 15 21:56:18 2021] Setting default values for core params
[Sa Mai 15 21:56:18 2021] Finished setting default values for core params
[Sa Mai 15 21:56:18 2021] Using Buffer DMA mode
[Sa Mai 15 21:56:18 2021] Periodic Transfer Interrupt Enhancement - disabled
[Sa Mai 15 21:56:18 2021] Multiprocessor Interrupt Enhancement - disabled
[Sa Mai 15 21:56:18 2021] OTG VER PARAM: 0, OTG VER FLAG: 0
[Sa Mai 15 21:56:18 2021] Dedicated Tx FIFOs mode
[Sa Mai 15 21:56:18 2021] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7514000 dma = 0xf7514000 len=9024
[Sa Mai 15 21:56:18 2021] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[Sa Mai 15 21:56:18 2021] dwc_otg: Microframe scheduler enabled
[Sa Mai 15 21:56:18 2021] WARN::hcd_init_fiq:457: FIQ on core 1
[Sa Mai 15 21:56:18 2021] WARN::hcd_init_fiq:458: FIQ ASM at 8070bf24 length 36
[Sa Mai 15 21:56:18 2021] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
[Sa Mai 15 21:56:18 2021] dwc_otg 3f980000.usb: DWC OTG Controller
[Sa Mai 15 21:56:18 2021] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Sa Mai 15 21:56:18 2021] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[Sa Mai 15 21:56:18 2021] Init: Port Power? op_state=1
[Sa Mai 15 21:56:18 2021] Init: Power Port (0)
[Sa Mai 15 21:56:18 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[Sa Mai 15 21:56:18 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sa Mai 15 21:56:18 2021] usb usb1: Product: DWC OTG Controller
[Sa Mai 15 21:56:18 2021] usb usb1: Manufacturer: Linux 5.4.83-v7+ dwc_otg_hcd
[Sa Mai 15 21:56:18 2021] usb usb1: SerialNumber: 3f980000.usb
[Sa Mai 15 21:56:18 2021] hub 1-0:1.0: USB hub found
[Sa Mai 15 21:56:18 2021] hub 1-0:1.0: 1 port detected
[Sa Mai 15 21:56:18 2021] dwc_otg: FIQ enabled
[Sa Mai 15 21:56:18 2021] dwc_otg: NAK holdoff enabled
[Sa Mai 15 21:56:18 2021] dwc_otg: FIQ split-transaction FSM enabled
[Sa Mai 15 21:56:18 2021] Module dwc_common_port init
[Sa Mai 15 21:56:18 2021] usbcore: registered new interface driver usb-storage
[Sa Mai 15 21:56:18 2021] mousedev: PS/2 mouse device common for all mice
[Sa Mai 15 21:56:18 2021] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[Sa Mai 15 21:56:18 2021] sdhci: Secure Digital Host Controller Interface driver
[Sa Mai 15 21:56:18 2021] sdhci: Copyright(c) Pierre Ossman
[Sa Mai 15 21:56:18 2021] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Sa Mai 15 21:56:18 2021] sdhci-pltfm: SDHCI platform and OF driver helper
[Sa Mai 15 21:56:18 2021] ledtrig-cpu: registered to indicate activity on CPUs
[Sa Mai 15 21:56:18 2021] hidraw: raw HID events driver (C) Jiri Kosina
[Sa Mai 15 21:56:18 2021] usbcore: registered new interface driver usbhid
[Sa Mai 15 21:56:18 2021] usbhid: USB HID core driver
[Sa Mai 15 21:56:18 2021] vchiq: vchiq_init_state: slot_zero = (ptrval)
[Sa Mai 15 21:56:18 2021] [vc_sm_connected_init]: start
[Sa Mai 15 21:56:18 2021] [vc_sm_connected_init]: end - returning 0
[Sa Mai 15 21:56:18 2021] Initializing XFRM netlink socket
[Sa Mai 15 21:56:18 2021] NET: Registered protocol family 17
[Sa Mai 15 21:56:18 2021] Key type dns_resolver registered
[Sa Mai 15 21:56:18 2021] Registering SWP/SWPB emulation handler
[Sa Mai 15 21:56:18 2021] registered taskstats version 1
[Sa Mai 15 21:56:18 2021] Loading compiled-in X.509 certificates
[Sa Mai 15 21:56:18 2021] Key type ._fscrypt registered
[Sa Mai 15 21:56:18 2021] Key type .fscrypt registered
[Sa Mai 15 21:56:18 2021] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Sa Mai 15 21:56:18 2021] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[Sa Mai 15 21:56:19 2021] printk: console [ttyAMA0] enabled
[Sa Mai 15 21:56:19 2021] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[Sa Mai 15 21:56:19 2021] sdhost: log_buf @ (ptrval) (f7513000)
[Sa Mai 15 21:56:19 2021] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Sa Mai 15 21:56:19 2021] of_cfs_init
[Sa Mai 15 21:56:19 2021] of_cfs_init: OK
[Sa Mai 15 21:56:19 2021] Waiting for root device PARTUUID=9016b890-02...
[Sa Mai 15 21:56:19 2021] Indeed it is in host mode hprt0 = 00021501
[Sa Mai 15 21:56:19 2021] mmc0: host does not support reading read-only switch, assuming write-enable
[Sa Mai 15 21:56:19 2021] mmc0: Problem switching card into high-speed mode!
[Sa Mai 15 21:56:19 2021] random: fast init done
[Sa Mai 15 21:56:19 2021] mmc0: new SDHC card at address 0001
[Sa Mai 15 21:56:19 2021] mmcblk0: mmc0:0001 SD 29.1 GiB
[Sa Mai 15 21:56:19 2021] mmcblk0: p1 p2
[Sa Mai 15 21:56:20 2021] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sa Mai 15 21:56:20 2021] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sa Mai 15 21:56:20 2021] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Sa Mai 15 21:56:20 2021] devtmpfs: mounted
[Sa Mai 15 21:56:20 2021] Indeed it is in host mode hprt0 = 00001101
[Sa Mai 15 21:56:20 2021] Freeing unused kernel memory: 1024K
[Sa Mai 15 21:56:20 2021] Run /sbin/init as init process
[Sa Mai 15 21:56:20 2021] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[Sa Mai 15 21:56:20 2021] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sa Mai 15 21:56:20 2021] hub 1-1:1.0: USB hub found
[Sa Mai 15 21:56:20 2021] hub 1-1:1.0: 5 ports detected
[Sa Mai 15 21:56:20 2021] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Sa Mai 15 21:56:20 2021] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[Sa Mai 15 21:56:20 2021] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sa Mai 15 21:56:20 2021] smsc95xx v1.0.6
[Sa Mai 15 21:56:20 2021] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:1d:97:92
[Sa Mai 15 21:56:21 2021] systemd[1]: System time before build time, advancing clock.
[Sa Mai 15 21:56:21 2021] NET: Registered protocol family 10
[Sa Mai 15 21:56:21 2021] Segment Routing with IPv6
[Sa Mai 15 21:56:21 2021] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[Sa Mai 15 21:56:21 2021] systemd[1]: Detected architecture arm.
[Sa Mai 15 21:56:21 2021] systemd[1]: Set hostname to <raspberrypi>.
[Sa Mai 15 21:56:22 2021] uart-pl011 3f201000.serial: no DMA platform data
[Sa Mai 15 21:56:23 2021] random: systemd: uninitialized urandom read (16 bytes read)
[Sa Mai 15 21:56:23 2021] random: systemd: uninitialized urandom read (16 bytes read)
[Sa Mai 15 21:56:23 2021] systemd[1]: Listening on udev Kernel Socket.
[Sa Mai 15 21:56:23 2021] random: systemd: uninitialized urandom read (16 bytes read)
[Sa Mai 15 21:56:23 2021] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[Sa Mai 15 21:56:23 2021] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[Sa Mai 15 21:56:23 2021] systemd[1]: Listening on udev Control Socket.
[Sa Mai 15 21:56:23 2021] systemd[1]: Listening on initctl Compatibility Named Pipe.
[Sa Mai 15 21:56:23 2021] systemd[1]: Listening on Journal Socket (/dev/log).
[Sa Mai 15 21:56:23 2021] systemd[1]: Listening on Journal Socket.
[Sa Mai 15 21:56:23 2021] Driver for 1-wire Dallas network protocol.
[Sa Mai 15 21:56:23 2021] gpio-4 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[Sa Mai 15 21:56:23 2021] w1_master_driver w1_bus_master1: Attaching one wire slave 10.0008006e6f6a crc 7a
[Sa Mai 15 21:56:23 2021] w1_master_driver w1_bus_master1: Attaching one wire slave 10.0008029c443e crc 39
[Sa Mai 15 21:56:23 2021] w1_master_driver w1_bus_master1: Attaching one wire slave 10.0008009e3229 crc 5e
[Sa Mai 15 21:56:24 2021] w1_master_driver w1_bus_master1: Attaching one wire slave 10.00080269db5f crc e5
[Sa Mai 15 21:56:24 2021] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Sa Mai 15 21:56:24 2021] systemd-journald[115]: Received request to flush runtime journal from PID 1
[Sa Mai 15 21:56:25 2021] mc: Linux media interface: v0.10
[Sa Mai 15 21:56:25 2021] videodev: Linux video capture interface: v2.00
[Sa Mai 15 21:56:25 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[Sa Mai 15 21:56:25 2021] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[Sa Mai 15 21:56:25 2021] [vc_sm_connected_init]: start
[Sa Mai 15 21:56:25 2021] [vc_sm_connected_init]: installed successfully
[Sa Mai 15 21:56:25 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[Sa Mai 15 21:56:25 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[Sa Mai 15 21:56:25 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[Sa Mai 15 21:56:25 2021] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[Sa Mai 15 21:56:25 2021] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[Sa Mai 15 21:56:25 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[Sa Mai 15 21:56:25 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[Sa Mai 15 21:56:25 2021] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[Sa Mai 15 21:56:25 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[Sa Mai 15 21:56:25 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[Sa Mai 15 21:56:25 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[Sa Mai 15 21:56:25 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[Sa Mai 15 21:56:25 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[Sa Mai 15 21:56:25 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[Sa Mai 15 21:56:25 2021] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[Sa Mai 15 21:56:25 2021] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Sa Mai 15 21:56:25 2021] bcm2835_audio bcm2835_audio: card created with 8 channels
[Sa Mai 15 21:56:25 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[Sa Mai 15 21:56:25 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[Sa Mai 15 21:56:25 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[Sa Mai 15 21:56:25 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[Sa Mai 15 21:56:25 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[Sa Mai 15 21:56:25 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[Sa Mai 15 21:56:29 2021] random: crng init done
[Sa Mai 15 21:56:29 2021] random: 7 urandom warning(s) missed due to ratelimiting
[Sa Mai 15 21:56:29 2021] 8021q: 802.1Q VLAN Support v1.8
[Sa Mai 15 21:56:30 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[Sa Mai 15 21:56:30 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[Sa Mai 15 21:56:30 2021] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[Sa Mai 15 21:56:30 2021] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Sa Mai 15 21:56:33 2021] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[Sa Mai 15 21:56:35 2021] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead
[Sa Mai 15 22:25:49 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm npm: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:25:49 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm npm: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:25:49 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm npm: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:25:49 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm npm: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:25:49 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm npm: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:36:58 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:53:30 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:53:30 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:53:30 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:53:30 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:53:30 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:53:30 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:53:30 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:53:30 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:53:30 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[Sa Mai 15 22:53:30 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)
[So Mai 16 11:07:50 2021] EXT4-fs error: 2 callbacks suppressed
[So Mai 16 11:07:50 2021] EXT4-fs error (device mmcblk0p2): ext4_find_extent:920: inode #265665: comm node: pblk 1111399 bad header/extent: invalid magic - magic ffff, entries 65535, max 65535(0), depth 65535(0)

haselchen

@Thomas-Braun

Moby Dick

@haselchen mm du hast nix geschrieben?

Thomas Braun

@moby-dick
Bitte in CodeTags, damit ich das auch lesen kann.

Und ja, das Dateisystem ist hin.
Neue SD-Karte nehmen, Betriebssystem frisch installieren, iobroker 'nackt' installieren, backup einspielen, weitermachen.

haselchen

@Moby-Dick

Ich habe @Thomas-Braun damit eine Mitteilung gesendet.
Ohne das @ Zeichen bekommt der Andere Deine Antwort nicht mit.

Und Du solltest über ein Upgrade deines PI nachdenken.
Version 2 ist mit RAM zu schwach auf der Brust.

Moby Dick

@haselchen Was für du kaufen für ioBroker?

haselchen

@moby-dick

Da gibt es zig Threads hier, die Du in Ruhe mal durchforsten kannst.
Die Anforderungen, Bedingungen und und und sind bei jedem verschieden.

Moby Dick

@haselchen welche SD Karte würdest du kaufen für den Raspberry Pi

haselchen

@moby-dick

Immer SanDisk

Meister Mopper

@moby-dick
Ich habe gute Erfahrungen mit 'SanDisk Max Endurance Card' gemacht.

Community Forum

NEWS

Telegramm Adapter

Support us

515

32.9k

83.0k

1.3m