Sammlung Informationen Wallbox & ioBroker-Integration
-
@qlink Du hast einen relativ hohen dauerhaften Netzbezug eingestellt. 5.000W. D.h. zusätzlich zum PV-Überschuss nimmst zu immer zusätzlich 5.000W aus dem Netz dazu. Das erscheint mir deutlich zu hoch.
Mit wieviel Phasen lädst Du?Die Einschalt-Ampere von 5.000mA kannst Du Dir sparen. Die Box kann nur minimal 6A. Sieht du auch im Log.
Oder waren die schon Default gesetzt? Dann müsste ich mal nachschauen, ob das falsch hinterlegt ist.Das bitte auch mal das Log und die installierte Version posten.
-
Alles klar, dann habe ich den Wert falsch interpretiert, das ist natürlich viel zu hoch.
Ich lade mit 3 Phasen.Habs jetzt mal auf folgende Werte abgeändert:
Hier noch der iobroker Log output:
kecontact.0 2021-03-25 14:54:17.980 info (5168) minimum amperage not speficied or too low, using default value of 6000 kecontact.0 2021-03-25 14:54:17.980 info (5168) starting charging station in active mode kecontact.0 2021-03-25 14:54:12.959 info (5168) starting. Version 1.1.1 in C:/iobroker/iob01/node_modules/iobroker.kecontact, node: v10.17.0, js-controller: 3.2.16 host.iob01 2021-03-25 14:54:12.006 info instance system.adapter.kecontact.0 started with pid 5168 host.iob01 2021-03-25 14:54:09.610 info instance system.adapter.kecontact.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) kecontact.0 2021-03-25 14:54:08.980 info (1712) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason kecontact.0 2021-03-25 14:54:08.980 info (1712) terminating host.iob01 2021-03-25 14:54:08.981 info stopInstance system.adapter.kecontact.0 send kill signalEr regelt aber leider immer noch nicht ...
-
@qlink Hm, sieht soweit gut aus. IP-Adresse dürfte auch korrekt sein, sonst hätte sich die Wallbox auch passiv nicht regeln lassen.
Ach so, ist das Auto angesteckt? Es zeigt so gar nichts an. sonst den Adapter mal auf debug steleln und das log posten.
-
Ja Auto ist angesteckt und lädt auch brav.
Hier mal ein kleiner Auszug aus dem Log mit debug:
2021-03-25 15:13:26.493 - debug: kecontact.0 (9160) Redis Objects: Use Redis connection: 127.0.0.1:9001 2021-03-25 15:13:26.524 - debug: kecontact.0 (9160) Objects client ready ... initialize now 2021-03-25 15:13:26.524 - debug: kecontact.0 (9160) Objects create System PubSub Client 2021-03-25 15:13:26.540 - debug: kecontact.0 (9160) Objects create User PubSub Client 2021-03-25 15:13:26.540 - debug: kecontact.0 (9160) Objects client initialize lua scripts 2021-03-25 15:13:26.555 - debug: kecontact.0 (9160) Objects connected to redis: 127.0.0.1:9001 2021-03-25 15:13:26.555 - debug: kecontact.0 (9160) objectDB connected 2021-03-25 15:13:26.555 - debug: kecontact.0 (9160) Redis States: Use Redis connection: 127.0.0.1:9000 2021-03-25 15:13:26.571 - debug: kecontact.0 (9160) States create System PubSub Client 2021-03-25 15:13:26.571 - debug: kecontact.0 (9160) States create User PubSub Client 2021-03-25 15:13:26.571 - debug: kecontact.0 (9160) States connected to redis: 127.0.0.1:9000 2021-03-25 15:13:26.571 - debug: kecontact.0 (9160) statesDB connected 2021-03-25 15:13:26.805 - info: kecontact.0 (9160) starting. Version 1.1.1 in C:/iobroker/iob01/node_modules/iobroker.kecontact, node: v10.17.0, js-controller: 3.2.16 2021-03-25 15:13:31.854 - info: kecontact.0 (9160) starting charging station in active mode 2021-03-25 15:13:31.854 - info: kecontact.0 (9160) minimum amperage not speficied or too low, using default value of 6000 2021-03-25 15:13:31.854 - debug: kecontact.0 (9160) UDP server listening on 0.0.0.0:7090 2021-03-25 15:13:31.854 - debug: kecontact.0 (9160) UDP broadcast server listening on 0.0.0.0:7092 2021-03-25 15:13:31.854 - debug: kecontact.0 (9160) subscribe state sma-em.0.1901701237.pregard - current value: 1762.6000000000001 2021-03-25 15:13:31.854 - debug: kecontact.0 (9160) update state kecontact.0.sma-em.0.1901701237.pregard with value:1762.6000000000001 2021-03-25 15:13:31.854 - debug: kecontact.0 (9160) subscribe state sma-em.0.1901701237.psurplus - current value: 0 2021-03-25 15:13:31.854 - debug: kecontact.0 (9160) update state kecontact.0.sma-em.0.1901701237.psurplus with value:0 2021-03-25 15:13:32.089 - debug: kecontact.0 (9160) Sent "i" to 192.168.30.15:7090 2021-03-25 15:13:32.089 - debug: kecontact.0 (9160) UDP datagram from 192.168.30.15:7090: ""Firmware":"P30 v 3.10.16 (200708-201734)"" 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.eTotal with value:64303.1 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.ePres with value:13857.7 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.pf with value:99.5 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.p with value:5787722 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.i3 with value:8159 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.i2 with value:8181 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.i1 with value:8160 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.u3 with value:235 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.u2 with value:240 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.u1 with value:236 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.uptime with value:1399438 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.input with value:false 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.output with value:false 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.timeoutFailsafe with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.currentFailsafe with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.currentUser with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.currentHardware with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.maxCurrentPercent with value:33.3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.maxCurrent with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.enableUser with value:true 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.enableSys with value:true 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.plug with value:7 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.error2 with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.error1 with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.state with value:3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.firmware with value:P30 v 3.10.16 (200708-201734) 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.serial with value:20296767 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.product with value:KC-P30-ES2400B2-M0R 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.automatic.pauseWallbox with value:false 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.automatic.photovoltaics with value:false 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.statistics.plugTimestamp with value:2021-03-25T11:37:39.198Z 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.statistics.chargeTimestamp with value:2021-03-25T13:25:22.882Z 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.statistics.lastChargeStart with value:2021-03-19T14:33:49.664Z 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.statistics.lastChargeFinish with value:2021-03-19T17:37:36.521Z 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.statistics.lastChargeAmount with value:18.1553 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.COM-module with value:true 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.backend with value:false 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.timeQ with value:3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.DIP-Sw1 with value:0x26 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.DIP-Sw2 with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.currentTimer with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.timeoutCurrentTimer with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.setenergy with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.authON with value:false 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.authreq with value:false 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.automatic.addPower with value:500 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.statistics.surplus with value:null 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.statistics.maxPower with value:false 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.statistics.chargingPhases with value:3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.json with value:[{"ID":"100","Session ID":8,"Curr HW":20000,"E start":504454,"E pres":138584,"started[s]":1616672249,"ended[s]":0,"started":"2021-03-25 11:37:29.000","ended":"0","reason":0,"timeQ":0,"RFID tag":"0000000000000000","RFID class":"9b07e84a000000000000","Serial":"20296767","Sec":1399438}] 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.sessionid with value:8 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.currentHardware with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.eStart with value:50445.4 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.ePres with value:13858.4 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.started_s with value:1616672249 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.ended_s with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.started with value:2021-03-25 11:37:29.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.ended with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.reason with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.timeQ with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.rfid_class with value:9b07e84a000000000000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.serial with value:20296767 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_00.sec with value:1399438 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.json with value:[{"ID":"101","Session ID":7,"Curr HW":20000,"E start":322901,"E pres":181553,"started[s]":1616164422,"ended[s]":1616175449,"started":"2021-03-19 14:33:42.000","ended":"2021-03-19 17:37:29.000","reason":1,"timeQ":3,"RFID tag":"0000000000000000","RFID class":"fe1e8b2b000000000000","Serial":"20296767","Sec":1399438}] 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.sessionid with value:7 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.currentHardware with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.eStart with value:32290.1 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.ePres with value:18155.3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.started_s with value:1616164422 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.ended_s with value:1616175449 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.started with value:2021-03-19 14:33:42.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.ended with value:2021-03-19 17:37:29.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.reason with value:1 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.timeQ with value:3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.rfid_class with value:fe1e8b2b000000000000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.serial with value:20296767 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_01.sec with value:1399438 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.json with value:[{"ID":"102","Session ID":6,"Curr HW":20000,"E start":222666,"E pres":100235,"started[s]":1615638239,"ended[s]":1615648318,"started":"2021-03-13 12:23:59.000","ended":"2021-03-13 15:11:58.000","reason":1,"timeQ":3,"RFID tag":"0000000000000000","RFID class":"76e4d316000000000000","Serial":"20296767","Sec":1399439}] 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.sessionid with value:6 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.currentHardware with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.eStart with value:22266.6 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.ePres with value:10023.5 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.started_s with value:1615638239 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.ended_s with value:1615648318 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.started with value:2021-03-13 12:23:59.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.ended with value:2021-03-13 15:11:58.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.reason with value:1 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.timeQ with value:3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.rfid_class with value:76e4d316000000000000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.serial with value:20296767 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_02.sec with value:1399439 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.json with value:[{"ID":"103","Session ID":5,"Curr HW":20000,"E start":181890,"E pres":40776,"started[s]":1615290689,"ended[s]":1615294745,"started":"2021-03-09 11:51:29.000","ended":"2021-03-09 12:59:05.000","reason":1,"timeQ":3,"RFID tag":"0000000000000000","RFID class":"76e4d316000000000000","Serial":"20296767","Sec":1399439}] 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.sessionid with value:5 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.currentHardware with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.eStart with value:18189 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.ePres with value:4077.6 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.started_s with value:1615290689 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.ended_s with value:1615294745 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.started with value:2021-03-09 11:51:29.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.ended with value:2021-03-09 12:59:05.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.reason with value:1 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.timeQ with value:3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.rfid_class with value:76e4d316000000000000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.serial with value:20296767 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_03.sec with value:1399439 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.json with value:[{"ID":"104","Session ID":4,"Curr HW":20000,"E start":133509,"E pres":48381,"started[s]":1615207786,"ended[s]":1615212627,"started":"2021-03-08 12:49:46.000","ended":"2021-03-08 14:10:27.000","reason":1,"timeQ":3,"RFID tag":"0000000000000000","RFID class":"b9ca830c000000000000","Serial":"20296767","Sec":1399439}] 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.sessionid with value:4 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.currentHardware with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.eStart with value:13350.9 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.ePres with value:4838.1 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.started_s with value:1615207786 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.ended_s with value:1615212627 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.started with value:2021-03-08 12:49:46.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.ended with value:2021-03-08 14:10:27.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.reason with value:1 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.timeQ with value:3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.rfid_class with value:b9ca830c000000000000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.serial with value:20296767 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_04.sec with value:1399439 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.json with value:[{"ID":"105","Session ID":3,"Curr HW":20000,"E start":32654,"E pres":100855,"started[s]":1615117666,"ended[s]":1615127564,"started":"2021-03-07 11:47:46.000","ended":"2021-03-07 14:32:44.000","reason":1,"timeQ":3,"RFID tag":"0000000000000000","RFID class":"82c4800c000000000000","Serial":"20296767","Sec":1399439}] 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.sessionid with value:3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.currentHardware with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.eStart with value:3265.4 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.ePres with value:10085.5 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.started_s with value:1615117666 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.ended_s with value:1615127564 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.started with value:2021-03-07 11:47:46.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.ended with value:2021-03-07 14:32:44.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.reason with value:1 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.timeQ with value:3 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.rfid_class with value:82c4800c000000000000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.serial with value:20296767 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_05.sec with value:1399439 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.json with value:[{"ID":"106","Session ID":2,"Curr HW":20000,"E start":32654,"E pres":0,"started[s]":1615117466,"ended[s]":1615117659,"started":"2021-03-07 11:44:26.000","ended":"2021-03-07 11:47:39.000","reason":1,"timeQ":3,"RFID tag":"0000000000000000","RFID class":"fdfe073f000000000000","Serial":"20296767","Sec":1399440}] 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.sessionid with value:2 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.currentHardware with value:20000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.eStart with value:3265.4 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.ePres with value:0 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.started_s with value:1615117466 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.ended_s with value:1615117659 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.started with value:2021-03-07 11:44:26.000 2021-03-25 15:13:32.120 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.ended with value:2021-03-07 11:47:39.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.reason with value:1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.timeQ with value:3 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.rfid_class with value:fdfe073f000000000000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_06.sec with value:1399440 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.json with value:[{"ID":"107","Session ID":1,"Curr HW":20000,"E start":2269,"E pres":30385,"started[s]":1613817709,"ended[s]":1613818767,"started":"2021-02-20 10:41:49.000","ended":"2021-02-20 10:59:27.000","reason":1,"timeQ":3,"RFID tag":"0000000000000000","RFID class":"fdfe073f000000000000","Serial":"20296767","Sec":1399440}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.sessionid with value:1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.currentHardware with value:20000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.eStart with value:226.9 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.ePres with value:3038.5 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.started_s with value:1613817709 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.ended_s with value:1613818767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.started with value:2021-02-20 10:41:49.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.ended with value:2021-02-20 10:59:27.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.reason with value:1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.timeQ with value:3 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.rfid_class with value:fdfe073f000000000000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_07.sec with value:1399440 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.json with value:[{"ID":"108","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399440}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_08.sec with value:1399440 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.json with value:[{"ID":"109","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399441}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_09.sec with value:1399441 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.json with value:[{"ID":"110","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399441}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_10.sec with value:1399441 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.json with value:[{"ID":"111","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399441}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_11.sec with value:1399441 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.json with value:[{"ID":"112","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399412}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_12.sec with value:1399412 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.json with value:[{"ID":"113","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399412}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_13.sec with value:1399412 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.json with value:[{"ID":"114","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399412}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_14.sec with value:1399412 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.json with value:[{"ID":"115","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399413}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_15.sec with value:1399413 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.json with value:[{"ID":"116","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399413}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_16.sec with value:1399413 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.json with value:[{"ID":"117","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399413}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_17.sec with value:1399413 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.json with value:[{"ID":"118","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399414}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_18.sec with value:1399414 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.json with value:[{"ID":"119","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399414}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_19.sec with value:1399414 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.json with value:[{"ID":"120","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399414}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_20.sec with value:1399414 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.json with value:[{"ID":"121","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399414}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_21.sec with value:1399414 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.json with value:[{"ID":"122","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399415}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.serial with value:20296767 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_22.sec with value:1399415 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.json with value:[{"ID":"123","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399415}] 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.sessionid with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.currentHardware with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.eStart with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.ePres with value:-0.1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.started_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.ended_s with value:-1 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.reason with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.timeQ with value:255 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.136 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.serial with value:20296767 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_23.sec with value:1399415 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.json with value:[{"ID":"124","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399415}] 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.sessionid with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.currentHardware with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.eStart with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.ePres with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.started_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.ended_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.reason with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.timeQ with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.serial with value:20296767 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_24.sec with value:1399415 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.json with value:[{"ID":"125","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399416}] 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.sessionid with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.currentHardware with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.eStart with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.ePres with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.started_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.ended_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.reason with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.timeQ with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.serial with value:20296767 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_25.sec with value:1399416 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.json with value:[{"ID":"126","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399416}] 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.sessionid with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.currentHardware with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.eStart with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.ePres with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.started_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.ended_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.reason with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.timeQ with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.serial with value:20296767 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_26.sec with value:1399416 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.json with value:[{"ID":"127","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399416}] 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.sessionid with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.currentHardware with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.eStart with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.ePres with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.started_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.ended_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.reason with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.timeQ with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.serial with value:20296767 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_27.sec with value:1399416 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.json with value:[{"ID":"128","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399417}] 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.sessionid with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.currentHardware with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.eStart with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.ePres with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.started_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.ended_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.reason with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.timeQ with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.serial with value:20296767 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_28.sec with value:1399417 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.json with value:[{"ID":"129","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399417}] 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.sessionid with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.currentHardware with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.eStart with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.ePres with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.started_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.ended_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.reason with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.timeQ with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.serial with value:20296767 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_29.sec with value:1399417 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.json with value:[{"ID":"130","Session ID":-1,"Curr HW":-1,"E start":-1,"E pres":-1,"started[s]":-1,"ended[s]":-1,"started":"2106-02-07 06:28:15.000","ended":"2106-02-07 06:28:15.000","reason":255,"timeQ":255,"RFID tag":"ffffffffffffffff","RFID class":"ffffffffffffffffffff","Serial":"20296767","Sec":1399417}] 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.sessionid with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.currentHardware with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.eStart with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.ePres with value:-0.1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.started_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.ended_s with value:-1 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.started with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.ended with value:2106-02-07 06:28:15.000 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.reason with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.timeQ with value:255 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.rfid_class with value:ffffffffffffffffffff 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.serial with value:20296767 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) update state kecontact.0.Sessions.Session_30.sec with value:1399417 2021-03-25 15:13:32.151 - debug: kecontact.0 (9160) wallbox set to charging maximum of 20000 mA 2021-03-25 15:13:32.167 - debug: kecontact.0 (9160) stateChange kecontact.0.firmware {"val":"P30 v 3.10.16 (200708-201734)","ack":true,"ts":1616681612104,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1604251750835} 2021-03-25 15:13:32.183 - debug: kecontact.0 (9160) update state kecontact.0.firmware with value:P30 v 3.10.16 (200708-201734) 2021-03-25 15:13:32.214 - debug: kecontact.0 (9160) stateChange kecontact.0.statistics.chargingPhases {"val":3,"ack":true,"ts":1616681612214,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1616678722882} 2021-03-25 15:13:32.214 - debug: kecontact.0 (9160) update state kecontact.0.statistics.chargingPhases with value:3 2021-03-25 15:13:32.214 - debug: kecontact.0 (9160) stateChange sma-em.0.1901701237.pregard {"val":1814.2,"ack":true,"ts":1616681612213,"q":0,"from":"system.adapter.sma-em.0","user":"system.user.admin","lc":1616681612213} 2021-03-25 15:13:32.214 - debug: kecontact.0 (9160) update state kecontact.0.sma-em.0.1901701237.pregard with value:1814.2 2021-03-25 15:13:32.401 - debug: kecontact.0 (9160) Sent "report 1" to 192.168.30.15:7090 2021-03-25 15:13:32.401 - debug: kecontact.0 (9160) UDP datagram from 192.168.30.15:7090: "{ "ID": "1", "Product": "KC-P30-ES2400B2-M0R", "Serial": "20296767", "Firmware":"P30 v 3.10.16 (200708-201734)", "COM-module": 1, "Backend": 0, "timeQ": 3, "DIP-Sw1": "0x26", "DIP-Sw2": "0x00", "Sec": 1399451 } " 2021-03-25 15:13:32.401 - debug: kecontact.0 (9160) stateChange kecontact.0.product {"val":"KC-P30-ES2400B2-M0R","ack":true,"ts":1616681612401,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1604251751148} 2021-03-25 15:13:32.401 - debug: kecontact.0 (9160) update state kecontact.0.product with value:KC-P30-ES2400B2-M0R 2021-03-25 15:13:32.401 - debug: kecontact.0 (9160) stateChange kecontact.0.serial {"val":"20296767","ack":true,"ts":1616681612401,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1604251751148} 2021-03-25 15:13:32.401 - debug: kecontact.0 (9160) update state kecontact.0.serial with value:20296767 2021-03-25 15:13:32.401 - debug: kecontact.0 (9160) stateChange kecontact.0.firmware {"val":"P30 v 3.10.16 (200708-201734)","ack":true,"ts":1616681612401,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1604251750835} 2021-03-25 15:13:32.401 - debug: kecontact.0 (9160) update state kecontact.0.firmware with value:P30 v 3.10.16 (200708-201734) 2021-03-25 15:13:32.401 - debug: kecontact.0 (9160) stateChange kecontact.0.COM-module {"val":true,"ack":true,"ts":1616681612401,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1615267231548} 2021-03-25 15:13:32.401 - debug: kecontact.0 (9160) update state kecontact.0.COM-module with value:true 2021-03-25 15:13:32.417 - debug: kecontact.0 (9160) stateChange kecontact.0.backend {"val":false,"ack":true,"ts":1616681612401,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1615267231548} 2021-03-25 15:13:32.417 - debug: kecontact.0 (9160) update state kecontact.0.backend with value:false 2021-03-25 15:13:32.417 - debug: kecontact.0 (9160) stateChange kecontact.0.timeQ {"val":3,"ack":true,"ts":1616681612401,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1615267231548} 2021-03-25 15:13:32.417 - debug: kecontact.0 (9160) update state kecontact.0.timeQ with value:3 2021-03-25 15:13:32.417 - debug: kecontact.0 (9160) stateChange kecontact.0.DIP-Sw1 {"val":"0x26","ack":true,"ts":1616681612401,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1615267231548} 2021-03-25 15:13:32.417 - debug: kecontact.0 (9160) update state kecontact.0.DIP-Sw1 with value:0x26 2021-03-25 15:13:32.417 - debug: kecontact.0 (9160) stateChange kecontact.0.DIP-Sw2 {"val":0,"ack":true,"ts":1616681612401,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1615267231548} 2021-03-25 15:13:32.417 - debug: kecontact.0 (9160) update state kecontact.0.DIP-Sw2 with value:0 2021-03-25 15:13:32.417 - debug: kecontact.0 (9160) stateChange kecontact.0.uptime {"val":1399451,"ack":true,"ts":1616681612401,"q":0,"from":"system.adapter.kecontact.0","user":"system.user.admin","lc":1616681612401} 2021-03-25 15:13:32.417 - debug: kecontact.0 (9160) update state kecontact.0.uptime with value:1399451 2021-03-25 15:13:32.717 - debug: kecontact.0 (9160) Sent "report 2" to 192.168.30.15:7090 2021-03-25 15:13:32.717 - debug: kecontact.0 (9160) UDP datagram from 192.168.30.15:7090: "{ "ID": "2", "State": 3, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 1, "Enable user": 1, "Max curr": 20000, "Max curr %": 333, "Curr HW": 20000, "Curr user": 20000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 20000, "Tmo CT": 0, "Setenergy": 0, "Output": 0, "Input": 0, "Serial": "20296767", "Sec": 1399451 } " -
@qlink Hm, so ganz komme ich nicht dahinter. Kannst Du mal das Auto abstecken, den Adapter neu starten und erst danach wieder anstecken? Das ist das einzige das mir gerade einfällt. Evtl. aktiviert er die zyklische Prüfung des Überschusses nicht, wenn das Auto beim Start schon angesteckt war.
Das lässt sich dann korrigiert, köntne aber aktuell die Ursache sein. -
Das hätte ich auch gerade probiert.
Hat leider auch nix gebracht.
Selbes Bild.
Er lädt mit 8A (Begrenzung eingestellt im Auto), obwohl dadurch ein Netzbezug von aktuell 800W verursacht wird...
Für mein Verständnis sollte er ja automatisch auf 7A oder 6A runterregeln, damit eben eine minimale Netzeinspeisung übrig bleibt richtig ? -
@qlink Komisch.
Kannst Du das nochmal wiederholen und ein Debug-Log machen? Das Log hier bitte mit der Spoiler-Funktion (Das Icon mit dem Auge) nutzen, damit es defaultmäßig ausgeblendet wird.
UDP-Funktion der Wallbox ist ja aktiviert. Ist es korrekt, dass sie auf 20A abgeregelt ist? -
-
@qlink Leider hat es den Spoiler etwas durcheinander gebracht. Man muss ihn zigmal öffnen. Evlt. liegt es dara, dass der Output nicht mit "Code" markiert ist. Kannst Du das ändern? Dann kann ich ihn mir ansehen ohne erst 100 mal klicken zu müssen.
-
habs grad aktualisiert mit code tag ...
-
@qlink So, hab's gerade entdeckt. Ganz trivial...
2021-03-26 09:49:45.733 - [34mdebug[39m: kecontact.0 (2236) update state kecontact.0.display with value:volle LadeleistungDu hast den state kecontact.0.automatic.photovoltaics auf false sitzen, dann liefert die Wallbox immer die volle Leistung. Diesen Schalter auf true setzen und schon sollte es funktionieren.
Um den Zustand leicht zu erkennen, wird der Zustand auch immer am Wallbox-Display angezeigt.Bei der Gelegenheit habe ich (für eine künftige Version) den Default-Wert auf Automatik = an gestellt.
-
Vielen Dank für deine Hilfe.
Das war die Ursache!
Jetzt funktionierts genau wie eingestellt.Genialer Adapter!
Beste Grüße
-
Hab mich doch wohl etwas zu früh gefreut, oder verstehe ich die Settings eventuell wieder falsch.
Ich habe bei Mindestladezeit 7200s eingestellt.
Sollte er dann nicht, egal wie die aktuelle PV Situation aussieht, auf jeden Fall mal 2h laden... ?Ich hab gerade angesteckt und er stoppt von selbst nach kurzer Zeit den Ladevorgang, weil Ladeunterschreitung ...
kecontact.0 2021-03-29 13:59:08.892 info (4876) stop charging kecontact.0 2021-03-29 13:58:38.876 info (4876) dynamic adaption of charging to 6000 mA kecontact.0 2021-03-29 13:53:08.772 info (4876) stop charging kecontact.0 2021-03-29 13:52:38.763 info (4876) dynamic adaption of charging to 8500 mA kecontact.0 2021-03-29 13:52:08.762 info (4876) dynamic adaption of charging to 7000 mA kecontact.0 2021-03-29 13:51:38.749 info (4876) stop charging kecontact.0 2021-03-29 13:50:38.730 info (4876) dynamic adaption of charging to 6500 mA kecontact.0 2021-03-29 13:50:08.720 info (4876) dynamic adaption of charging to 6000 mA kecontact.0 2021-03-29 13:49:38.711 info (4876) dynamic adaption of charging to 7000 mA kecontact.0 2021-03-29 13:48:38.694 info (4876) dynamic adaption of charging to 6500 mA kecontact.0 2021-03-29 13:48:08.683 info (4876) dynamic adaption of charging to 6000 mA kecontact.0 2021-03-29 13:47:38.670 info (4876) dynamic adaption of charging to 7500 mA kecontact.0 2021-03-29 13:47:08.662 info (4876) dynamic adaption of charging to 7000 mA kecontact.0 2021-03-29 13:46:38.654 info (4876) dynamic adaption of charging to 6500 mA kecontact.0 2021-03-29 13:46:08.649 info (4876) dynamic adaption of charging to 6000 mA kecontact.0 2021-03-29 13:45:38.640 info (4876) dynamic adaption of charging to 6500 mA kecontact.0 2021-03-29 13:45:08.626 info (4876) dynamic adaption of charging to 7000 mA kecontact.0 2021-03-29 13:44:38.613 info (4876) dynamic adaption of charging to 8000 mA kecontact.0 2021-03-29 13:44:08.596 info (4876) dynamic adaption of charging to 7500 mA kecontact.0 2021-03-29 13:43:38.590 info (4876) stop charging kecontact.0 2021-03-29 13:42:38.576 info (4876) stop charging kecontact.0 2021-03-29 13:42:08.573 info (4876) dynamic adaption of charging to 8500 mA kecontact.0 2021-03-29 13:41:38.564 info (4876) stop charging kecontact.0 2021-03-29 13:41:08.551 info (4876) dynamic adaption of charging to 9500 mA kecontact.0 2021-03-29 13:40:38.542 info (4876) stop charging kecontact.0 2021-03-29 13:40:03.020 info (4876) dynamic adaption of charging to 8500 mA kecontact.0 2021-03-29 13:40:03.020 info (4876) vehicle plugged to wallbox -
@qlink was mich wundert, ist dass bei Dir der Logeintrag "vehicle (re)starts to charge" fehlt. So sieht es bei mir aus:
kecontact.0 2021-03-29 13:31:07.605 info (11211) dynamic adaption of charging to 9500 mA kecontact.0 2021-03-29 13:30:37.603 info (11211) dynamic adaption of charging to 11500 mA kecontact.0 2021-03-29 13:29:07.600 info (11211) vehicle (re)starts to charge kecontact.0 2021-03-29 13:29:07.599 info (11211) dynamic adaption of charging to 8500 mA kecontact.0 2021-03-29 13:28:37.596 info (11211) dynamic adaption of charging to 7500 mA kecontact.0 2021-03-29 13:28:37.587 info (11211) vehicle plugged to wallboxDadurch wird der Startzeitpunkt fürs Laden nicht initialisiert und liegt weit in der Vergangenheit. Dann sind die 7200 Sekunden immer schon um. Findest Du in einem älteren Log den Eintrag, dass das Laden gestartet wurde? Musst ggfs. auch die Tage davor anschauen. Ist da dann was Auffäligen drumherum zu sehen?
-
@sneak-l8 said in Sammlung Informationen Wallbox & ioBroker-Integration:
(re)starts
Hab den Eintrag im Log vor 3 Tagen gefunden:
2021-03-26 09:33:36.970 - [32minfo[39m: kecontact.0 (1804) vehicle plugged to wallbox 2021-03-26 09:34:08.222 - [32minfo[39m: kecontact.0 (1804) vehicle (re)starts to charge 2021-03-26 09:39:11.134 - [32minfo[39m: host.iob01 stopInstance system.adapter.kecontact.0 (force=false, process=true) 2021-03-26 09:39:11.135 - [32minfo[39m: kecontact.0 (1804) Got terminate signal TERMINATE_YOURSELF 2021-03-26 09:39:11.135 - [32minfo[39m: kecontact.0 (1804) terminating 2021-03-26 09:39:11.135 - [32minfo[39m: kecontact.0 (1804) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2021-03-26 09:39:11.134 - [32minfo[39m: host.iob01 stopInstance system.adapter.kecontact.0 send kill signal 2021-03-26 09:39:11.810 - [32minfo[39m: host.iob01 instance system.adapter.kecontact.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2021-03-26 09:39:14.172 - [32minfo[39m: host.iob01 instance system.adapter.kecontact.0 started with pid 10068 2021-03-26 09:39:15.174 - [32minfo[39m: kecontact.0 (10068) starting. Version 1.1.1 in C:/iobroker/iob01/node_modules/iobroker.kecontact, node: v10.17.0, js-controller: 3.2.16 2021-03-26 09:39:20.206 - [32minfo[39m: kecontact.0 (10068) starting charging station in active mode 2021-03-26 09:39:20.206 - [32minfo[39m: kecontact.0 (10068) minimum amperage not speficied or too low, using default value of 6000 2021-03-26 09:44:52.430 - [32minfo[39m: host.iob01 stopInstance system.adapter.kecontact.0 (force=false, process=true) 2021-03-26 09:44:52.431 - [32minfo[39m: kecontact.0 (10068) Got terminate signal TERMINATE_YOURSELF 2021-03-26 09:44:52.431 - [32minfo[39m: kecontact.0 (10068) terminating 2021-03-26 09:44:52.431 - [32minfo[39m: kecontact.0 (10068) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2021-03-26 09:44:52.430 - [32minfo[39m: host.iob01 stopInstance system.adapter.kecontact.0 send kill signal 2021-03-26 09:44:53.086 - [32minfo[39m: host.iob01 instance system.adapter.kecontact.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2021-03-26 09:44:55.459 - [32minfo[39m: host.iob01 instance system.adapter.kecontact.0 started with pid 1448 2021-03-26 09:44:56.117 - [34mdebug[39m: kecontact.0 (1448) Redis Objects: Use Redis connection: 127.0.0.1:9001 2021-03-26 09:44:56.133 - [34mdebug[39m: kecontact.0 (1448) Objects client ready ... initialize now 2021-03-26 09:44:56.148 - [34mdebug[39m: kecontact.0 (1448) Objects create System PubSub Client 2021-03-26 09:44:56.148 - [34mdebug[39m: kecontact.0 (1448) Objects create User PubSub Client 2021-03-26 09:44:56.148 - [34mdebug[39m: kecontact.0 (1448) Objects client initialize lua scripts 2021-03-26 09:44:56.164 - [34mdebug[39m: kecontact.0 (1448) Objects connected to redis: 127.0.0.1:9001 2021-03-26 09:44:56.164 - [34mdebug[39m: kecontact.0 (1448) objectDB connected 2021-03-26 09:44:56.164 - [34mdebug[39m: kecontact.0 (1448) Redis States: Use Redis connection: 127.0.0.1:9000 2021-03-26 09:44:56.179 - [34mdebug[39m: kecontact.0 (1448) States create System PubSub Client 2021-03-26 09:44:56.179 - [34mdebug[39m: kecontact.0 (1448) States create User PubSub Client 2021-03-26 09:44:56.179 - [34mdebug[39m: kecontact.0 (1448) States connected to redis: 127.0.0.1:9000 2021-03-26 09:44:56.179 - [34mdebug[39m: kecontact.0 (1448) statesDB connected 2021-03-26 09:44:56.367 - [32minfo[39m: kecontact.0 (1448) starting. Version 1.1.1 in C:/iobroker/iob01/node_modules/iobroker.kecontact, node: v10.17.0, js-controller: 3.2.16 -
@qlink Schau mal bitte in den State nach plugTiemstamp. Ist der gefüllt? Dann erkennt der Adapter nicht, dass das Fahrzeug zwischenzeitlich abgestekt wurde. Beim Anstecken sollte der state aber auf "null" gesetzt werden...
-
-
@qlink Und wenn Du jetzt wieder einsteckst gibt es auch keine Mindestladezeit? Die States sehen eigentlich alle gut aus.
Bitte mal nochmal Deine kompletten Einstellungen des Adapters und ein Log vom Einstecken, Ladeunterschreitung und Ausstecken. Bitteauch die State vor/nach Einstecken und um den Zeitpunkt der Ladeunterschreitung.
Kann mir gerade so keinen Reim drauf machen, was das Problem ist ... -
Hab das Auto gerade angesteckt und lädt auch brav mit 5A...
aber wie man sieht bleibt der plugTimestamp trotzdem leer
Kann es sein, dass es daran liegt, das ich das Kabel immer nur beim Auto ausstecke ?
Das andere Ende des Kabels in der Wallbox lasse ich immer angesteckt...Beste Grüße
-
@qlink Ah, bei Dir ist das Kabel an der Wallbox nicht fest angeschlagen? Kannst Du mir den Wert des states "plug" sagen, wenn Du an- bzw. abgesteckt hast? Evtl. verhält sich das anders als beschrieben...
