FHEM Adapter

hg6806

Nochmal wegen den Aktualisierungen der Werte.
Wenn ich in ioBroker unter Objekte mir die myHSPU Werte anschaue, leuchten die ca. alle 2-3 grün auf. Und zwar alle. Heißt das dass sie alle aktualisiert werden und somit der hohe Traffic und CPU Auslastung kommt?
Meine SSD war gecrasht/defekt. Kam das evtl. daher?

Es macht auch keinen Unterschied ob ich in FHEM einen Room mit ioBroker angelegt habe oder nicht.

andi2055

@hg6806
ja genau. es aktualisieren sich dann alle Werte des Moduls HPSU alle 2-3 Sek im ioB.
Ich habe das Problem nun aktuell auch wieder. Keine Ahnung weshalb

Die Werte im FHEM aktualisieren sich nur einzeln nach konfiguriertem Aktualisierungsintervall. Im ioB werden aber immer alle Werte aktualisiert.

Liegt das am FHEM oder ioB? Hat jemand eine Idee? Ist das nur beim FHEM Modul "HPSU" oder auch bei anderen so?

Im FHEM werden die Werte einzeln aktualisiert

im ioB immer alle!?

hg6806

Kann ich so bestätigen, dass in FHEM nur einzelne Werte aktualisiert werden, in ioBroker aber immer alle.
Allerdings werden die aktualisierten in FHEM rot und bleiben rot. D.h. nach einiger Zeit sind alle rot. Weiß jetzt aber nicht ob das was zu bedeuten hat hinsichtlich ioBroker.

andi2055

kann mir jemand ein FHEM Modul nennen, was man einfach aufsetzen kann und auch periodisch einzelne Werte aktualisiert, so dass ich das mal testen kann, ob es nur am FHEM Modul liegt?
Ich kenne mich auch nicht mit FHEM aus und habe nur das HPSU Modul im Einsatz

andi2055

ich hatte jetzt zum Testen mal die FHEM Instanz gelöscht und danach neu angelegt. Dann hatte es wieder funktioniert - es wurden nur einzelne Werte aktualisiert. Mittlerweile werden aber wieder alle aktualisiert. Ist das ein Bug im ioB FHEM Adapter?

hg6806

@andi2055
Vielleicht liegts doch daran wie viele Werte aktuell rot in FHEM sind?
Anfangs ja nur wenige, und die werden immer mehr.

LausiD

@hg6806 @andi2055
Habe eine Vermutung: Wenn von FHEM Werte kommen und kein Objekt dazu gefunden wird macht der FHEM Adapter ein jsonlist2 auf das Device.
Bedeuted alle Werte vom Device werden neu eingelesen.
In den Readings/Objekten von oben sind gar keine Klammern enthalten?
Lasst den FHEM Adapter mal im Debug Mode laufen und schaut das Log an.

Gruß LausiD

LausiD

@andi2055 sagte in FHEM Adapter:

kann mir jemand ein FHEM Modul nennen, was man einfach aufsetzen kann und auch periodisch einzelne Werte aktualisiert, so dass ich das mal testen kann, ob es nur am FHEM Modul liegt?
Ich kenne mich auch nicht mit FHEM aus und habe nur das HPSU Modul im Einsatz

Zum Test würde zB das Device rssFeed Sinn machen
Gruß LausiD

andi2055

@LausiD
du hast recht. Im Log stehen etliche Einträge analog:
HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen > no sync - no fhemObjects >> jsonlist2 myHPSU

Was bedeutet das? Irgendwie aktualisiert er doch die Werte. Oder nur durch jsonlist2?

So sieht das aktuell in ioB aus.

Habe ich vielleicht noch einen Fehler bei der von mir geänderten Konvertierung/Zeichenersetzung?
Könntest du da helfen? Ich blicke da nämlich ehrlicherweise nicht so komplett durch was da passiert.

Danke dir!

noch etwas mehr aus dem Log:

2021-01-08 21:44:41.580  - [34mdebug[39m: fhem.0 (23419) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Durchfluss: 1146 lh"
2021-01-08 21:44:41.581  - [32minfo[39m: fhem.0 (23419) unhandled event FHEM: ---- | HPSU myHPSU HPSU.Durchfluss: 1146 lh > no sync  - no fhemObjects >> jsonlist2 myHPSU
2021-01-08 21:44:41.590  - [34mdebug[39m: fhem.0 (23419) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 4.402 kW"
2021-01-08 21:44:41.591  - [32minfo[39m: fhem.0 (23419) unhandled event FHEM: ---- | HPSU myHPSU Info.Q: 4.402 kW > no sync  - no fhemObjects >> jsonlist2 myHPSU
2021-01-08 21:44:42.274  - [34mdebug[39m: fhem.0 (23419) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 %"
2021-01-08 21:44:42.276  - [32minfo[39m: fhem.0 (23419) unhandled event FHEM: ---- | HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 % > no sync  - no fhemObjects >> jsonlist2 myHPSU
2021-01-08 21:44:42.301  - [34mdebug[39m: fhem.0 (23419) [main] [eventFHEM] [processEvent] [parseEvent] [doJsonlist] [checkQueue] [processQueue] [requestMeta] [parseObjects] check channel fhem.0.myHPSU | name: myHPSU | room: HPSU | role: undefined | function: no |  1/1
2021-01-08 21:44:42.313  - [34mdebug[39m: fhem.0 (23419) [main] [eventFHEM] [processEvent] [parseEvent] [doJsonlist] [checkQueue] [processQueue] [requestMeta] [parseObjects] Funktion: sensor für fhem.0.myHPSU.state_boolean
2021-01-08 21:44:42.317  - [34mdebug[39m: fhem.0 (23419) [syncObjects] update object: fhem.0.myHPSU (channel) -  native
2021-01-08 21:44:42.321  - [34mdebug[39m: fhem.0 (23419) [stateChange] stateChange (in): fhem.0.info.Info.numberDevicesFHEMignored 4 {"val":4,"ack":true,"ts":1610138682315,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1609801200338}
2021-01-08 21:44:42.349  - [34mdebug[39m: fhem.0 (23419) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~HK_Funktion_{hc_func} (state) -  common
2021-01-08 21:44:42.368  - [34mdebug[39m: fhem.0 (23419) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Betriebsart_{mode_01} (state) -  common
2021-01-08 21:44:42.379  - [34mdebug[39m: fhem.0 (23419) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Fluesterbetrieb_{quiet_mode} (state) -  common
2021-01-08 21:44:42.448  - [34mdebug[39m: fhem.0 (23419) [syncRoom] (HPSU) fhem.0.myHPSU
2021-01-08 21:44:42.452  - [34mdebug[39m: fhem.0 (23419) [syncFunction] (sensor) fhem.0.myHPSU.state_boolean
2021-01-08 21:44:42.456  - [34mdebug[39m: fhem.0 (23419) [stateChange] stateChange (in): fhem.0.info.Info.numberObjectsIOBin 191 {"val":191,"ack":true,"ts":1610138682449,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610112665933}
2021-01-08 21:44:42.484  - [34mdebug[39m: fhem.0 (23419) [syncStates] update state: fhem.0.myHPSU.HPSU~Durchfluss = 1191 lh > 1146 lh
2021-01-08 21:44:42.488  - [34mdebug[39m: fhem.0 (23419) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Durchfluss 1146 lh {"val":"1146

LausiD

@andi2055
Danke für die Infos.
Welche Version hat der FHEM Adapter bei dir?
Deine oder die github Version?

andi2055

@LausiD
ich hatte heute mit beiden Versionen experimentiert.

Anbei Log & Screenshot von deiner Github-Version

fhem.0	2021-01-08 22:46:42.652	debug	(9878) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU_Vorlauftemperatur_Waermeerzeuger 25.8 °C {"val":"25.8 °C","ack":true,"ts":1610142402650,"q":0,"from":"system.adapter.fhem.0","user":"system.us
fhem.0	2021-01-08 22:46:42.649	debug	(9878) [syncStates] update state: fhem.0.myHPSU.HPSU_Vorlauftemperatur_Waermeerzeuger = 27.1 °C > 25.8 °C
fhem.0	2021-01-08 22:46:42.628	debug	(9878) [stateChange] stateChange (in): fhem.0.info.Info.numberObjectsIOBin 191 {"val":191,"ack":true,"ts":1610142402624,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":16101126659
fhem.0	2021-01-08 22:46:42.625	debug	(9878) [syncFunction] (sensor) fhem.0.myHPSU.state_boolean
fhem.0	2021-01-08 22:46:42.623	debug	(9878) [syncRoom] (HPSU) fhem.0.myHPSU
fhem.0	2021-01-08 22:46:42.575	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Fluesterbetrieb_{quiet_mode} (state) - common
fhem.0	2021-01-08 22:46:42.519	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Betriebsart_{mode_01} (state) - common
fhem.0	2021-01-08 22:46:42.505	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~HK_Funktion_{hc_func} (state) - common
fhem.0	2021-01-08 22:46:42.494	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU Info.Q: 0.133 kW > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:42.493	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 0.133 kW"
fhem.0	2021-01-08 22:46:42.480	debug	(9878) [stateChange] stateChange (in): fhem.0.info.Info.numberDevicesFHEMignored 4 {"val":4,"ack":true,"ts":1610142402476,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":160980120
fhem.0	2021-01-08 22:46:42.478	debug	(9878) [syncObjects] update object: fhem.0.myHPSU (channel) - native
fhem.0	2021-01-08 22:46:42.474	debug	(9878) [main] [eventFHEM] [processEvent] [parseEvent] [doJsonlist] [checkQueue] [processQueue] [requestMeta] [parseObjects] Funktion: sensor für fhem.0.myHPSU.state_boolean
fhem.0	2021-01-08 22:46:42.472	debug	(9878) [main] [eventFHEM] [processEvent] [parseEvent] [doJsonlist] [checkQueue] [processQueue] [requestMeta] [parseObjects] check channel fhem.0.myHPSU | name: myHPSU | room: HPSU | role: undefined |
fhem.0	2021-01-08 22:46:42.462	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 25.8 °C > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:42.462	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 25.8 °C"
fhem.0	2021-01-08 22:46:41.799	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU HPSU.Direkter_Heizkreis_Modus: active > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:41.799	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Direkter_Heizkreis_Modus: active"
fhem.0	2021-01-08 22:46:40.885	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:40.885	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
fhem.0	2021-01-08 22:46:40.447	debug	(9878) [syncStates] end
fhem.0	2021-01-08 22:46:40.438	debug	(9878) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU_Kaeltemitteltemperatur 27.5 °C {"val":"27.5 °C","ack":true,"ts":1610142400437,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin",
fhem.0	2021-01-08 22:46:40.436	debug	(9878) [syncStates] update state: fhem.0.myHPSU.HPSU_Kaeltemitteltemperatur = 27.7 °C > 27.5 °C
fhem.0	2021-01-08 22:46:40.421	debug	(9878) [stateChange] stateChange (in): fhem.0.info.Info.numberObjectsIOBin 191 {"val":191,"ack":true,"ts":1610142400419,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":16101126659
fhem.0	2021-01-08 22:46:40.420	debug	(9878) [syncFunction] (sensor) fhem.0.myHPSU.state_boolean
fhem.0	2021-01-08 22:46:40.418	debug	(9878) [syncRoom] (HPSU) fhem.0.myHPSU
fhem.0	2021-01-08 22:46:40.375	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Fluesterbetrieb_{quiet_mode} (state) - common
fhem.0	2021-01-08 22:46:40.315	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Betriebsart_{mode_01} (state) - common
fhem.0	2021-01-08 22:46:40.283	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~HK_Funktion_{hc_func} (state) - common
fhem.0	2021-01-08 22:46:40.254	debug	(9878) [stateChange] stateChange (in): fhem.0.info.Info.numberDevicesFHEMignored 4 {"val":4,"ack":true,"ts":1610142400248,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":160980120
fhem.0	2021-01-08 22:46:40.249	debug	(9878) [syncObjects] update object: fhem.0.myHPSU (channel) - native
fhem.0	2021-01-08 22:46:40.246	debug	(9878) [main] [eventFHEM] [processEvent] [parseEvent] [doJsonlist] [checkQueue] [processQueue] [requestMeta] [parseObjects] Funktion: sensor für fhem.0.myHPSU.state_boolean
fhem.0	2021-01-08 22:46:40.242	debug	(9878) [main] [eventFHEM] [processEvent] [parseEvent] [doJsonlist] [checkQueue] [processQueue] [requestMeta] [parseObjects] check channel fhem.0.myHPSU | name: myHPSU | room: HPSU | role: undefined |
fhem.0	2021-01-08 22:46:40.225	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU HPSU.ehs: 0 kWh > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:40.224	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.ehs: 0 kWh"
fhem.0	2021-01-08 22:46:37.265	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:37.265	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C"
fhem.0	2021-01-08 22:46:37.011	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU HPSU.Kaeltemitteltemperatur: 27.5 °C > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:37.010	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Kaeltemitteltemperatur: 27.5 °C"
fhem.0	2021-01-08 22:46:36.766	debug	(9878) [syncStates] end
fhem.0	2021-01-08 22:46:36.765	debug	(9878) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 1.867 kW {"val":"1.867 kW","ack":true,"ts":1610142396762,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610142396762
fhem.0	2021-01-08 22:46:36.761	debug	(9878) [syncStates] update state: fhem.0.myHPSU.Info_Q = 1.067 kW > 1.867 kW
fhem.0	2021-01-08 22:46:36.758	debug	(9878) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU_T_direkter_Heizkreis 26.1 °C {"val":"26.1 °C","ack":true,"ts":1610142396756,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","
fhem.0	2021-01-08 22:46:36.755	debug	(9878) [syncStates] update state: fhem.0.myHPSU.HPSU_T_direkter_Heizkreis = 27.9 °C > 26.1 °C
fhem.0	2021-01-08 22:46:36.747	debug	(9878) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU_Heizung_Ruecklauf 25.7 °C {"val":"25.7 °C","ack":true,"ts":1610142396745,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc"
fhem.0	2021-01-08 22:46:36.743	debug	(9878) [syncStates] update state: fhem.0.myHPSU.HPSU_Heizung_Ruecklauf = 26.3 °C > 25.7 °C
fhem.0	2021-01-08 22:46:36.725	debug	(9878) [stateChange] stateChange (in): fhem.0.info.Info.numberObjectsIOBin 191 {"val":191,"ack":true,"ts":1610142396721,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610112665
fhem.0	2021-01-08 22:46:36.723	debug	(9878) [syncFunction] (sensor) fhem.0.myHPSU.state_boolean
fhem.0	2021-01-08 22:46:36.720	debug	(9878) [syncRoom] (HPSU) fhem.0.myHPSU
fhem.0	2021-01-08 22:46:36.656	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Fluesterbetrieb_{quiet_mode} (state) - common
fhem.0	2021-01-08 22:46:36.649	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Betriebsart_{mode_01} (state) - common
fhem.0	2021-01-08 22:46:36.635	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~HK_Funktion_{hc_func} (state) - common
fhem.0	2021-01-08 22:46:36.615	debug	(9878) [stateChange] stateChange (in): fhem.0.info.Info.numberDevicesFHEMignored 4 {"val":4,"ack":true,"ts":1610142396599,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":16098012
fhem.0	2021-01-08 22:46:36.601	debug	(9878) [syncObjects] update object: fhem.0.myHPSU (channel) - native
fhem.0	2021-01-08 22:46:36.595	debug	(9878) [main] [eventFHEM] [processEvent] [parseEvent] [doJsonlist] [checkQueue] [processQueue] [requestMeta] [parseObjects] Funktion: sensor für fhem.0.myHPSU.state_boolean
fhem.0	2021-01-08 22:46:36.591	debug	(9878) [main] [eventFHEM] [processEvent] [parseEvent] [doJsonlist] [checkQueue] [processQueue] [requestMeta] [parseObjects] check channel fhem.0.myHPSU | name: myHPSU | room: HPSU | role: undefined |
fhem.0	2021-01-08 22:46:36.573	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU Info.Q: 1.867 kW > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:36.572	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 1.867 kW"
fhem.0	2021-01-08 22:46:36.553	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU HPSU.Heizung_Ruecklauf: 25.7 °C > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:36.552	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Heizung_Ruecklauf: 25.7 °C"
fhem.0	2021-01-08 22:46:36.036	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU HPSU.T_direkter_Heizkreis: 26.1 °C > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:36.036	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.T_direkter_Heizkreis: 26.1 °C"
fhem.0	2021-01-08 22:46:34.767	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:34.766	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
fhem.0	2021-01-08 22:46:34.385	debug	(9878) [syncStates] end
fhem.0	2021-01-08 22:46:34.351	debug	(9878) [stateChange] stateChange (in): fhem.0.info.Info.numberObjectsIOBin 191 {"val":191,"ack":true,"ts":1610142394345,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610112665
fhem.0	2021-01-08 22:46:34.348	debug	(9878) [syncFunction] (sensor) fhem.0.myHPSU.state_boolean
fhem.0	2021-01-08 22:46:34.345	debug	(9878) [syncRoom] (HPSU) fhem.0.myHPSU
fhem.0	2021-01-08 22:46:34.222	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Fluesterbetrieb_{quiet_mode} (state) - common
fhem.0	2021-01-08 22:46:34.212	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Betriebsart_{mode_01} (state) - common
fhem.0	2021-01-08 22:46:34.151	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~HK_Funktion_{hc_func} (state) - common
fhem.0	2021-01-08 22:46:34.125	debug	(9878) [stateChange] stateChange (in): fhem.0.info.Info.numberDevicesFHEMignored 4 {"val":4,"ack":true,"ts":1610142394119,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":16098012
fhem.0	2021-01-08 22:46:34.121	debug	(9878) [syncObjects] update object: fhem.0.myHPSU (channel) - native
fhem.0	2021-01-08 22:46:34.117	debug	(9878) [main] [eventFHEM] [processEvent] [parseEvent] [doJsonlist] [checkQueue] [processQueue] [requestMeta] [parseObjects] Funktion: sensor für fhem.0.myHPSU.state_boolean
fhem.0	2021-01-08 22:46:34.113	debug	(9878) [main] [eventFHEM] [processEvent] [parseEvent] [doJsonlist] [checkQueue] [processQueue] [requestMeta] [parseObjects] check channel fhem.0.myHPSU | name: myHPSU | room: HPSU | role: undefined |
fhem.0	2021-01-08 22:46:34.096	info	(9878) unhandled event FHEM: ---- | HPSU myHPSU HPSU.ehs: 0 kWh > no sync - no fhemObjects >> jsonlist2 myHPSU
fhem.0	2021-01-08 22:46:34.095	debug	(9878) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.ehs: 0 kWh"
fhem.0	2021-01-08 22:46:32.242	debug	(9878) [syncStates] end
fhem.0	2021-01-08 22:46:32.241	debug	(9878) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 1.067 kW {"val":"1.067 kW","ack":true,"ts":1610142392239,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610142392239
fhem.0	2021-01-08 22:46:32.238	debug	(9878) [syncStates] update state: fhem.0.myHPSU.Info_Q = 2.934 kW > 1.067 kW
fhem.0	2021-01-08 22:46:32.215	debug	(9878) [syncFunction] (sensor) fhem.0.myHPSU.state_boolean
fhem.0	2021-01-08 22:46:32.214	debug	(9878) [stateChange] stateChange (in): fhem.0.info.Info.numberObjectsIOBin 191 {"val":191,"ack":true,"ts":1610142392213,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610112665
fhem.0	2021-01-08 22:46:32.212	debug	(9878) [syncRoom] (HPSU) fhem.0.myHPSU
fhem.0	2021-01-08 22:46:32.165	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Fluesterbetrieb_{quiet_mode} (state) - common
fhem.0	2021-01-08 22:46:32.110	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~Betriebsart_{mode_01} (state) - common
fhem.0	2021-01-08 22:46:32.095	debug	(9878) [syncObjects] update object: fhem.0.myHPSU.HPSUVal~HK_Funktion_{hc_func} (state) - common
fhem.0	2021-01-08 22:46:32.080	debug	(9878) [stateChange] stateChange (in): fhem.0.info.Info.numberDevicesFHEMignored 4 {"val":4,"ack":true,"ts":1610142392076,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":16098012
fhem.0	2021-01-08 22:46:32.077	debug	(9878) [syncObjects] update object: fhem.0.myHPSU (channel) - native

LausiD

@andi2055
Jetzt wird es langsam klar :-)
Der Name von einem Reading wird beim Adapter Start von . auf _ geändert.
Kommt eine Wertänderung für dieses Reading wird aber nichts geändert.
Deshalb das jsonlist2 für alle Readings :-(
Bisher noch nie von Readings mit . gehört. Kennt jemand noch Readings mit . im Name?
Egal kann ich am WE noch einbauen....
Gruß LausiD

LausiD

@andi2055 @hg6806
So jetzt mal bitte nochmal mit update von github prüfen.
Danke und Gruß
LausiD

hg6806

@LausiD
So, getestet!
Aktualisierung der Werte in ioBroker sehr sporadisch wie es sein soll.

Aber die Datenpunkte haben sich wieder im Namen geändert, da bekomme ich immer einen Anfall, da da viel dranhängt wie VIS, Javascript, History, etc.
Ist immer ein Mega-Aufwand das wieder geradezubügeln.

LausiD

@hg6806
Danke für die Rückmeldung :-)
Die Datenpunkte sollten wie in der Version von @andi2055 sein. Also aus . wird ~. aus[ wird { und aus ] wird }.
Ok in meiner letzen Version wurde aus . ein _ :-(
Finde ich aber besser, da bisher schon aus . auch ein _ wurde.
Was meinst du?

hg6806

@LausiD
Bin gerade am Ändern.
Bitte so lassen wenn es ok für alle ist.

LausiD

@hg6806 @andi2055

Falls die angelegten Objekte jetzt so aussehen können wir es so lassen.

Gruß
LausiD

andi2055

@LausiD
funktioniert bei mir auch perfekt.
Danke dir!

Anbei 1 Min Debug Log. Sieht aber denke ich gut aus.

2021-01-09 21:27:00.100 - debug: shuttercontrol.0 (2454) outsidetemperature changed: 0_userdata.0.Außen.Temperatur.Mean_15 Value: 0.7
2021-01-09 21:27:02.062 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
2021-01-09 21:27:02.063 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen | reading > fhem.0.myHPSU.HPSU~Aktive_Betriebsart Heizen
2021-01-09 21:27:04.249 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.ehs: 0 kWh"
2021-01-09 21:27:04.249 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.ehs: 0 kWh | reading > fhem.0.myHPSU.HPSU~ehs 0 kWh
2021-01-09 21:27:04.507 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Durchfluss: 1123 lh"
2021-01-09 21:27:04.508 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Durchfluss: 1123 lh | reading > fhem.0.myHPSU.HPSU~Durchfluss 1123 lh
2021-01-09 21:27:05.220 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 %"
2021-01-09 21:27:05.221 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 % | reading > fhem.0.myHPSU.HPSU~Pos_Vent_3UV_DHW 0 %
2021-01-09 21:27:05.478 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.UWPumpe: 50 %"
2021-01-09 21:27:05.479 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.UWPumpe: 50 % | reading > fhem.0.myHPSU.HPSU~UWPumpe 50 %
2021-01-09 21:27:06.604 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.T_direkter_Heizkreis: 29.3 °C"
2021-01-09 21:27:06.605 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.T_direkter_Heizkreis: 29.3 °C | reading > fhem.0.myHPSU.HPSU~T_direkter_Heizkreis 29.3 °C
2021-01-09 21:27:06.611 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~T_direkter_Heizkreis 29.3 °C {"val":"29.3 °C","ack":true,"ts":1610224026607,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224026607}
2021-01-09 21:27:06.911 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 29.2 °C"
2021-01-09 21:27:06.912 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 29.2 °C | reading > fhem.0.myHPSU.HPSU~Vorlauftemperatur_Waermeerzeuger 29.2 °C
2021-01-09 21:27:07.513 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Wartezeit_BOH: 80 min"
2021-01-09 21:27:07.513 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Wartezeit_BOH: 80 min | reading > fhem.0.myHPSU.HPSU~Wartezeit_BOH 80 min
2021-01-09 21:27:08.020 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UVB1: 0 %"
2021-01-09 21:27:08.021 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Pos_Vent_3UVB1: 0 % | reading > fhem.0.myHPSU.HPSU~Pos_Vent_3UVB1 0 %
2021-01-09 21:27:08.782 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
2021-01-09 21:27:08.782 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen | reading > fhem.0.myHPSU.HPSU~Aktive_Betriebsart Heizen
2021-01-09 21:27:10.360 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Heizung_Ruecklauf: 25.6 °C"
2021-01-09 21:27:10.362 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Heizung_Ruecklauf: 25.6 °C | reading > fhem.0.myHPSU.HPSU~Heizung_Ruecklauf 25.6 °C
2021-01-09 21:27:10.367 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Heizung_Ruecklauf 25.6 °C {"val":"25.6 °C","ack":true,"ts":1610224030364,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224030364}
2021-01-09 21:27:10.389 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 4.705 kW"
2021-01-09 21:27:10.391 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU Info.Q: 4.705 kW | reading > fhem.0.myHPSU.Info_Q 4.705 kW
2021-01-09 21:27:10.395 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 4.705 kW {"val":"4.705 kW","ack":true,"ts":1610224030392,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224030392}
2021-01-09 21:27:10.823 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Kaeltemitteltemperatur: 26 °C"
2021-01-09 21:27:10.824 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Kaeltemitteltemperatur: 26 °C | reading > fhem.0.myHPSU.HPSU~Kaeltemitteltemperatur 26 °C
2021-01-09 21:27:11.077 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C"
2021-01-09 21:27:11.078 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C | reading > fhem.0.myHPSU.HPSU~Ruecklauftemperatur 25.7 °C
2021-01-09 21:27:11.081 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Ruecklauftemperatur 25.7 °C {"val":"25.7 °C","ack":true,"ts":1610224031079,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224031079}
2021-01-09 21:27:11.331 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.TVBH: 29.3 °C"
2021-01-09 21:27:11.331 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.TVBH: 29.3 °C | reading > fhem.0.myHPSU.HPSU~TVBH 29.3 °C
2021-01-09 21:27:11.794 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.ehs: 0 kWh"
2021-01-09 21:27:11.795 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.ehs: 0 kWh | reading > fhem.0.myHPSU.HPSU~ehs 0 kWh
2021-01-09 21:27:14.902 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
2021-01-09 21:27:14.903 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen | reading > fhem.0.myHPSU.HPSU~Aktive_Betriebsart Heizen
2021-01-09 21:27:16.233 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Soll_T_direkter_Heizkreis: 29.2 °C"
2021-01-09 21:27:16.234 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Soll_T_direkter_Heizkreis: 29.2 °C | reading > fhem.0.myHPSU.HPSU~Soll_T_direkter_Heizkreis 29.2 °C
2021-01-09 21:27:16.540 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Soll_Vorlauftemperatur_Waermeerzeuger: 29.2 °C"
2021-01-09 21:27:16.541 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Soll_Vorlauftemperatur_Waermeerzeuger: 29.2 °C | reading > fhem.0.myHPSU.HPSU~Soll_Vorlauftemperatur_Waermeerzeuger 29.2 °C
2021-01-09 21:27:17.494 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.ehs: 0 kWh"
2021-01-09 21:27:17.495 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.ehs: 0 kWh | reading > fhem.0.myHPSU.HPSU~ehs 0 kWh
2021-01-09 21:27:17.748 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Durchfluss: 1146 lh"
2021-01-09 21:27:17.749 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Durchfluss: 1146 lh | reading > fhem.0.myHPSU.HPSU~Durchfluss 1146 lh
2021-01-09 21:27:17.753 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Durchfluss 1146 lh {"val":"1146 lh","ack":true,"ts":1610224037751,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224037751}
2021-01-09 21:27:17.775 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 4.802 kW"
2021-01-09 21:27:17.776 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU Info.Q: 4.802 kW | reading > fhem.0.myHPSU.Info_Q 4.802 kW
2021-01-09 21:27:17.781 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 4.802 kW {"val":"4.802 kW","ack":true,"ts":1610224037778,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224037778}
2021-01-09 21:27:18.411 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Betriebsart: Heizen"
2021-01-09 21:27:18.412 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Betriebsart: Heizen | reading > fhem.0.myHPSU.HPSU~Betriebsart Heizen
2021-01-09 21:27:18.665 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 %"
2021-01-09 21:27:18.666 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 % | reading > fhem.0.myHPSU.HPSU~Pos_Vent_3UV_DHW 0 %
2021-01-09 21:27:18.940 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.UWPumpe: 50 %"
2021-01-09 21:27:18.940 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.UWPumpe: 50 % | reading > fhem.0.myHPSU.HPSU~UWPumpe 50 %
2021-01-09 21:27:19.732 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.T_Warmwasser: 43.4 °C"
2021-01-09 21:27:19.734 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.T_Warmwasser: 43.4 °C | reading > fhem.0.myHPSU.HPSU~T_Warmwasser 43.4 °C
2021-01-09 21:27:19.741 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~T_Warmwasser 43.4 °C {"val":"43.4 °C","ack":true,"ts":1610224039737,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224039737}
2021-01-09 21:27:20.256 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.T_direkter_Heizkreis: 29.3 °C"
2021-01-09 21:27:20.257 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.T_direkter_Heizkreis: 29.3 °C | reading > fhem.0.myHPSU.HPSU~T_direkter_Heizkreis 29.3 °C
2021-01-09 21:27:20.559 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 29.2 °C"
2021-01-09 21:27:20.562 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 29.2 °C | reading > fhem.0.myHPSU.HPSU~Vorlauftemperatur_Waermeerzeuger 29.2 °C
2021-01-09 21:27:20.907 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.T_Aussen: -0.2 °C"
2021-01-09 21:27:20.908 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.T_Aussen: -0.2 °C | reading > fhem.0.myHPSU.HPSU~T_Aussen -0.2 °C
2021-01-09 21:27:20.912 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~T_Aussen -0.2 °C {"val":"-0.2 °C","ack":true,"ts":1610224040909,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224040909}
2021-01-09 21:27:21.160 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Heizung_Ruecklauf: 26.2 °C"
2021-01-09 21:27:21.161 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Heizung_Ruecklauf: 26.2 °C | reading > fhem.0.myHPSU.HPSU~Heizung_Ruecklauf 26.2 °C
2021-01-09 21:27:21.169 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Heizung_Ruecklauf 26.2 °C {"val":"26.2 °C","ack":true,"ts":1610224041167,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224041167}
2021-01-09 21:27:21.189 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 4.001 kW"
2021-01-09 21:27:21.190 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU Info.Q: 4.001 kW | reading > fhem.0.myHPSU.Info_Q 4.001 kW
2021-01-09 21:27:21.195 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 4.001 kW {"val":"4.001 kW","ack":true,"ts":1610224041192,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224041192}
2021-01-09 21:27:21.621 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Kaeltemitteltemperatur: 25.9 °C"
2021-01-09 21:27:21.622 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Kaeltemitteltemperatur: 25.9 °C | reading > fhem.0.myHPSU.HPSU~Kaeltemitteltemperatur 25.9 °C
2021-01-09 21:27:21.626 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Kaeltemitteltemperatur 25.9 °C {"val":"25.9 °C","ack":true,"ts":1610224041623,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224041623}
2021-01-09 21:27:21.874 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C"
2021-01-09 21:27:21.875 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C | reading > fhem.0.myHPSU.HPSU~Ruecklauftemperatur 25.7 °C
2021-01-09 21:27:22.287 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UVB1: 0 %"
2021-01-09 21:27:22.288 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Pos_Vent_3UVB1: 0 % | reading > fhem.0.myHPSU.HPSU~Pos_Vent_3UVB1 0 %
2021-01-09 21:27:23.048 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
2021-01-09 21:27:23.049 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen | reading > fhem.0.myHPSU.HPSU~Aktive_Betriebsart Heizen
2021-01-09 21:27:23.967 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Direkter_Heizkreis_Modus: active"
2021-01-09 21:27:23.968 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Direkter_Heizkreis_Modus: active | reading > fhem.0.myHPSU.HPSU~Direkter_Heizkreis_Modus active
2021-01-09 21:27:24.884 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Soll_T_Raum_1: 21 °C"
2021-01-09 21:27:24.885 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Soll_T_Raum_1: 21 °C | reading > fhem.0.myHPSU.HPSU~Soll_T_Raum_1 21 °C
2021-01-09 21:27:25.142 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.T_Aussen_WP: -0.2 °C"
2021-01-09 21:27:25.143 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.T_Aussen_WP: -0.2 °C | reading > fhem.0.myHPSU.HPSU~T_Aussen_WP -0.2 °C
2021-01-09 21:27:25.147 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~T_Aussen_WP -0.2 °C {"val":"-0.2 °C","ack":true,"ts":1610224045145,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224045145}
2021-01-09 21:27:25.854 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.ehs: 0 kWh"
2021-01-09 21:27:25.854 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.ehs: 0 kWh | reading > fhem.0.myHPSU.HPSU~ehs 0 kWh
2021-01-09 21:27:28.545 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Durchfluss: 1168 lh"
2021-01-09 21:27:28.546 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Durchfluss: 1168 lh | reading > fhem.0.myHPSU.HPSU~Durchfluss 1168 lh
2021-01-09 21:27:28.548 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Durchfluss 1168 lh {"val":"1168 lh","ack":true,"ts":1610224048546,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224048546}
2021-01-09 21:27:28.573 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 4.078 kW"
2021-01-09 21:27:28.573 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU Info.Q: 4.078 kW | reading > fhem.0.myHPSU.Info_Q 4.078 kW
2021-01-09 21:27:28.579 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 4.078 kW {"val":"4.078 kW","ack":true,"ts":1610224048574,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224048574}
2021-01-09 21:27:29.157 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
2021-01-09 21:27:29.158 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen | reading > fhem.0.myHPSU.HPSU~Aktive_Betriebsart Heizen
2021-01-09 21:27:29.464 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 %"
2021-01-09 21:27:29.465 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 % | reading > fhem.0.myHPSU.HPSU~Pos_Vent_3UV_DHW 0 %
2021-01-09 21:27:29.721 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.UWPumpe: 50 %"
2021-01-09 21:27:29.722 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.UWPumpe: 50 % | reading > fhem.0.myHPSU.HPSU~UWPumpe 50 %
2021-01-09 21:27:30.849 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.T_direkter_Heizkreis: 29.3 °C"
2021-01-09 21:27:30.850 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.T_direkter_Heizkreis: 29.3 °C | reading > fhem.0.myHPSU.HPSU~T_direkter_Heizkreis 29.3 °C
2021-01-09 21:27:31.216 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 29.3 °C"
2021-01-09 21:27:31.218 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 29.3 °C | reading > fhem.0.myHPSU.HPSU~Vorlauftemperatur_Waermeerzeuger 29.3 °C
2021-01-09 21:27:31.224 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 4.214 kW"
2021-01-09 21:27:31.225 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU Info.Q: 4.214 kW | reading > fhem.0.myHPSU.Info_Q 4.214 kW
2021-01-09 21:27:31.228 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Vorlauftemperatur_Waermeerzeuger 29.3 °C {"val":"29.3 °C","ack":true,"ts":1610224051219,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224051219}
2021-01-09 21:27:31.230 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 4.214 kW {"val":"4.214 kW","ack":true,"ts":1610224051226,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224051226}
2021-01-09 21:27:31.605 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Heizung_Ruecklauf: 26.1 °C"
2021-01-09 21:27:31.606 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Heizung_Ruecklauf: 26.1 °C | reading > fhem.0.myHPSU.HPSU~Heizung_Ruecklauf 26.1 °C
2021-01-09 21:27:31.611 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Heizung_Ruecklauf 26.1 °C {"val":"26.1 °C","ack":true,"ts":1610224051607,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224051607}
2021-01-09 21:27:31.630 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 4.350 kW"
2021-01-09 21:27:31.631 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU Info.Q: 4.350 kW | reading > fhem.0.myHPSU.Info_Q 4.350 kW
2021-01-09 21:27:31.633 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 4.350 kW {"val":"4.350 kW","ack":true,"ts":1610224051632,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224051632}
2021-01-09 21:27:32.061 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Kaeltemitteltemperatur: 26 °C"
2021-01-09 21:27:32.062 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Kaeltemitteltemperatur: 26 °C | reading > fhem.0.myHPSU.HPSU~Kaeltemitteltemperatur 26 °C
2021-01-09 21:27:32.066 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Kaeltemitteltemperatur 26 °C {"val":"26 °C","ack":true,"ts":1610224052064,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224052064}
2021-01-09 21:27:32.319 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C"
2021-01-09 21:27:32.319 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C | reading > fhem.0.myHPSU.HPSU~Ruecklauftemperatur 25.7 °C
2021-01-09 21:27:32.724 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UVB1: 0 %"
2021-01-09 21:27:32.725 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Pos_Vent_3UVB1: 0 % | reading > fhem.0.myHPSU.HPSU~Pos_Vent_3UVB1 0 %
2021-01-09 21:27:33.031 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.ehs: 0 kWh"
2021-01-09 21:27:33.032 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.ehs: 0 kWh | reading > fhem.0.myHPSU.HPSU~ehs 0 kWh
2021-01-09 21:27:36.136 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
2021-01-09 21:27:36.137 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen | reading > fhem.0.myHPSU.HPSU~Aktive_Betriebsart Heizen
2021-01-09 21:27:38.330 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.ehs: 0 kWh"
2021-01-09 21:27:38.330 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.ehs: 0 kWh | reading > fhem.0.myHPSU.HPSU~ehs 0 kWh
2021-01-09 21:27:41.021 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Durchfluss: 1146 lh"
2021-01-09 21:27:41.022 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Durchfluss: 1146 lh | reading > fhem.0.myHPSU.HPSU~Durchfluss 1146 lh
2021-01-09 21:27:41.024 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Durchfluss 1146 lh {"val":"1146 lh","ack":true,"ts":1610224061023,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224061023}
2021-01-09 21:27:41.049 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 4.268 kW"
2021-01-09 21:27:41.050 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU Info.Q: 4.268 kW | reading > fhem.0.myHPSU.Info_Q 4.268 kW
2021-01-09 21:27:41.053 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 4.268 kW {"val":"4.268 kW","ack":true,"ts":1610224061051,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224061051}
2021-01-09 21:27:41.631 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
2021-01-09 21:27:41.632 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen | reading > fhem.0.myHPSU.HPSU~Aktive_Betriebsart Heizen
2021-01-09 21:27:41.935 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 %"
2021-01-09 21:27:41.936 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 % | reading > fhem.0.myHPSU.HPSU~Pos_Vent_3UV_DHW 0 %
2021-01-09 21:27:42.192 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.UWPumpe: 50 %"
2021-01-09 21:27:42.193 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.UWPumpe: 50 % | reading > fhem.0.myHPSU.HPSU~UWPumpe 50 %
2021-01-09 21:27:43.319 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.T_direkter_Heizkreis: 29.2 °C"
2021-01-09 21:27:43.320 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.T_direkter_Heizkreis: 29.2 °C | reading > fhem.0.myHPSU.HPSU~T_direkter_Heizkreis 29.2 °C
2021-01-09 21:27:43.323 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~T_direkter_Heizkreis 29.2 °C {"val":"29.2 °C","ack":true,"ts":1610224063321,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224063321}
2021-01-09 21:27:43.626 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 29.3 °C"
2021-01-09 21:27:43.627 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 29.3 °C | reading > fhem.0.myHPSU.HPSU~Vorlauftemperatur_Waermeerzeuger 29.3 °C
2021-01-09 21:27:44.020 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Heizung_Ruecklauf: 26.1 °C"
2021-01-09 21:27:44.021 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Heizung_Ruecklauf: 26.1 °C | reading > fhem.0.myHPSU.HPSU~Heizung_Ruecklauf 26.1 °C
2021-01-09 21:27:44.480 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Kaeltemitteltemperatur: 26 °C"
2021-01-09 21:27:44.480 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Kaeltemitteltemperatur: 26 °C | reading > fhem.0.myHPSU.HPSU~Kaeltemitteltemperatur 26 °C
2021-01-09 21:27:44.744 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C"
2021-01-09 21:27:44.747 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C | reading > fhem.0.myHPSU.HPSU~Ruecklauftemperatur 25.7 °C
2021-01-09 21:27:44.990 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.TVBH: 29.2 °C"
2021-01-09 21:27:44.991 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.TVBH: 29.2 °C | reading > fhem.0.myHPSU.HPSU~TVBH 29.2 °C
2021-01-09 21:27:44.996 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~TVBH 29.2 °C {"val":"29.2 °C","ack":true,"ts":1610224064993,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224064993}
2021-01-09 21:27:45.346 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UVB1: 0 %"
2021-01-09 21:27:45.347 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Pos_Vent_3UVB1: 0 % | reading > fhem.0.myHPSU.HPSU~Pos_Vent_3UVB1 0 %
2021-01-09 21:27:45.651 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.ehs: 0 kWh"
2021-01-09 21:27:45.651 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.ehs: 0 kWh | reading > fhem.0.myHPSU.HPSU~ehs 0 kWh
2021-01-09 21:27:47.448 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Soll_T_direkter_Heizkreis: 29.2 °C"
2021-01-09 21:27:47.448 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Soll_T_direkter_Heizkreis: 29.2 °C | reading > fhem.0.myHPSU.HPSU~Soll_T_direkter_Heizkreis 29.2 °C
2021-01-09 21:27:47.755 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Soll_Vorlauftemperatur_Waermeerzeuger: 29.2 °C"
2021-01-09 21:27:47.755 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Soll_Vorlauftemperatur_Waermeerzeuger: 29.2 °C | reading > fhem.0.myHPSU.HPSU~Soll_Vorlauftemperatur_Waermeerzeuger 29.2 °C
2021-01-09 21:27:49.169 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
2021-01-09 21:27:49.170 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen | reading > fhem.0.myHPSU.HPSU~Aktive_Betriebsart Heizen
2021-01-09 21:27:49.918 - debug: fhem.0 (16732) [setAlive] start setAlive 300 sec
2021-01-09 21:27:49.923 - info: fhem.0 (16732) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2021-01-09 21:27:49.933 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "dummy fhem.0.alive on"
2021-01-09 21:27:49.933 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [getAlive] alive true - start
2021-01-09 21:27:49.936 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [main] [eventFHEM] [processEvent] [parseEvent] [getAlive] alive reset timer
2021-01-09 21:27:49.937 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.info.Commands.sendFHEM set fhem.0.alive on-for-timer 360 {"val":"set fhem.0.alive on-for-timer 360","ack":true,"ts":1610224069920,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224069920}
2021-01-09 21:27:49.954 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.info.Commands.resultFHEM {"val":"","ack":true,"ts":1610224069941,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224069941}
2021-01-09 21:27:49.955 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.info.Info.alive true {"val":true,"ack":true,"ts":1610224069942,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610223769942}
2021-01-09 21:27:49.955 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.info.Debug.numberIn 144 {"val":144,"ack":true,"ts":1610224069942,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224069942}
2021-01-09 21:27:49.960 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.info.Debug.timeIn 5 {"val":5,"ack":true,"ts":1610224069943,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224069943}
2021-01-09 21:27:49.961 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.info.Debug.numberOut 0 {"val":0,"ack":true,"ts":1610224069944,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610131742427}
2021-01-09 21:27:49.962 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.info.Debug.timeOut null {"val":null,"ack":true,"ts":1610224069944,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224069944}
2021-01-09 21:27:49.967 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.info.Commands.lastCommand set fhem.0.alive on-for-timer 360 {"val":"set fhem.0.alive on-for-timer 360","ack":true,"ts":1610224069951,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224069951}
2021-01-09 21:27:49.969 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.info.Commands.sendFHEM done {"val":"done","ack":true,"ts":1610224069957,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224069957}
2021-01-09 21:27:51.359 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.ehs: 0 kWh"
2021-01-09 21:27:51.360 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.ehs: 0 kWh | reading > fhem.0.myHPSU.HPSU~ehs 0 kWh
2021-01-09 21:27:51.613 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Durchfluss: 1146 lh"
2021-01-09 21:27:51.614 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Durchfluss: 1146 lh | reading > fhem.0.myHPSU.HPSU~Durchfluss 1146 lh
2021-01-09 21:27:52.328 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 %"
2021-01-09 21:27:52.331 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Pos_Vent_3UV_DHW: 0 % | reading > fhem.0.myHPSU.HPSU~Pos_Vent_3UV_DHW 0 %
2021-01-09 21:27:52.581 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.UWPumpe: 50 %"
2021-01-09 21:27:52.582 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.UWPumpe: 50 % | reading > fhem.0.myHPSU.HPSU~UWPumpe 50 %
2021-01-09 21:27:53.450 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Soll_T_Warmwasser: 46 °C"
2021-01-09 21:27:53.450 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Soll_T_Warmwasser: 46 °C | reading > fhem.0.myHPSU.HPSU~Soll_T_Warmwasser 46 °C
2021-01-09 21:27:53.920 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.T_direkter_Heizkreis: 29.3 °C"
2021-01-09 21:27:53.921 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.T_direkter_Heizkreis: 29.3 °C | reading > fhem.0.myHPSU.HPSU~T_direkter_Heizkreis 29.3 °C
2021-01-09 21:27:53.924 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~T_direkter_Heizkreis 29.3 °C {"val":"29.3 °C","ack":true,"ts":1610224073922,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224073922}
2021-01-09 21:27:54.223 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 29.4 °C"
2021-01-09 21:27:54.225 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Vorlauftemperatur_Waermeerzeuger: 29.4 °C | reading > fhem.0.myHPSU.HPSU~Vorlauftemperatur_Waermeerzeuger 29.4 °C
2021-01-09 21:27:54.229 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Vorlauftemperatur_Waermeerzeuger 29.4 °C {"val":"29.4 °C","ack":true,"ts":1610224074227,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224074227}
2021-01-09 21:27:54.243 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 4.402 kW"
2021-01-09 21:27:54.244 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU Info.Q: 4.402 kW | reading > fhem.0.myHPSU.Info_Q 4.402 kW
2021-01-09 21:27:54.248 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 4.402 kW {"val":"4.402 kW","ack":true,"ts":1610224074245,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224074245}
2021-01-09 21:27:54.624 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Heizung_Ruecklauf: 26 °C"
2021-01-09 21:27:54.625 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Heizung_Ruecklauf: 26 °C | reading > fhem.0.myHPSU.HPSU~Heizung_Ruecklauf 26 °C
2021-01-09 21:27:54.629 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Heizung_Ruecklauf 26 °C {"val":"26 °C","ack":true,"ts":1610224074627,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224074627}
2021-01-09 21:27:54.652 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU Info.Q: 4.535 kW"
2021-01-09 21:27:54.653 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU Info.Q: 4.535 kW | reading > fhem.0.myHPSU.Info_Q 4.535 kW
2021-01-09 21:27:54.657 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.Info_Q 4.535 kW {"val":"4.535 kW","ack":true,"ts":1610224074655,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224074655}
2021-01-09 21:27:55.083 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Kaeltemitteltemperatur: 26.1 °C"
2021-01-09 21:27:55.084 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Kaeltemitteltemperatur: 26.1 °C | reading > fhem.0.myHPSU.HPSU~Kaeltemitteltemperatur 26.1 °C
2021-01-09 21:27:55.087 - debug: fhem.0 (16732) [stateChange] stateChange (in): fhem.0.myHPSU.HPSU~Kaeltemitteltemperatur 26.1 °C {"val":"26.1 °C","ack":true,"ts":1610224075085,"q":0,"from":"system.adapter.fhem.0","user":"system.user.admin","lc":1610224075085}
2021-01-09 21:27:55.341 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C"
2021-01-09 21:27:55.342 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Ruecklauftemperatur: 25.7 °C | reading > fhem.0.myHPSU.HPSU~Ruecklauftemperatur 25.7 °C
2021-01-09 21:27:55.747 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Pos_Vent_3UVB1: 0 %"
2021-01-09 21:27:55.747 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Pos_Vent_3UVB1: 0 % | reading > fhem.0.myHPSU.HPSU~Pos_Vent_3UVB1 0 %
2021-01-09 21:27:56.513 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen"
2021-01-09 21:27:56.514 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Aktive_Betriebsart: Heizen | reading > fhem.0.myHPSU.HPSU~Aktive_Betriebsart Heizen
2021-01-09 21:27:57.430 - debug: fhem.0 (16732) [main] [eventFHEM] eventFHEM(in): "HPSU myHPSU HPSU.Direkter_Heizkreis_Modus: active"
2021-01-09 21:27:57.431 - debug: fhem.0 (16732) [main] [eventFHEM] [processEvent] [parseEvent] [eventOK] event FHEM: myHPSU | HPSU myHPSU HPSU.Direkter_Heizkreis_Modus: active | reading > fhem.0.myHPSU.HPSU~Direkter_Heizkreis_Modus active

So sieht's aus

D3ltoroxp

@andi2055 Ich bräuchte mal noch eure Hilfe. Soweit läuft der Adapter Top, ich bräuchte hier noch die Buttons in ioBroker, damit ich die Rollos zum fahren forcen kann, auch wenn das Rollo Device sagt der Rollo sei unten. Hier kann ich dennoch drücken und er fährt, falls er noch oben ist. Aber ich habe hier keine attr die ich adden könnte.

Fällt euch dazu was ein, wie ich das dennoch über ioB steuern kann, bräuchte das für die VIS ?

LausiD

@d3ltoroxp
Mh wenn du den Befehl dafür kennst, kannst du zB im ioB über fhem.0.info.Commands.sendFHEM den Befehl eingeben.

Gruß LausiD

Community Forum

NEWS

FHEM Adapter

Support us

419

32.4k

81.4k

1.3m