Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[arteck]

@legro weil die version 1.3.0 publiziert wurde...

[Holger Etzel]

@arteck
Hallo, ich bin es mal wieder.
Nach Update auf 1.3.0 wird ein Schalter erkannt, datenpunkte werden angelegt, aber kein True oder false in den Werten beim drücken der Buttons. Felder bleiben leer.
Auch das erkannte Bild ist nicht der Schalter von Tuya (ts0043)

Kannst du da vielleicht nochmal nachschauen, danke.

[stewe]

@arteck Hallo arteck,
nach update auf 1.3.0 hier noch einmal die Bitte, den LED Stripe Controller DC5-24V (Lonsonho Tuya Zigbee Smart RGB Led Controller) einzubinden.



https://de.aliexpress.com/item/1005001315938878.html?spm=a2g0s.9042311.0.0.1cda4c4dhphTWS
Vielen Dank für die bisher geleistete Arbeit!

[arteck]

@Holger-Etzel das Bild wird nicht immer passen da tuya unterschiedlichen Geräten gleiche Modelnamen vergibt..

stell den adapter auf Debug.. drücke ein knopp nach dem anderen und poste das LOG

[Holger Etzel]

@arteck

hier das log

zigbee.1	2020-10-09 15:56:41.798	debug	(12346) Publish {"action":"right_single"}
zigbee.1	2020-10-09 15:56:41.795	debug	(12346) Type raw device {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"dev
zigbee.1	2020-10-09 15:56:41.793	debug	(12346) Received Zigbee message from '0xec1bbdfffe76d92a', type 'raw', cluster 'genOnOff', data '{"type":"Buffer","data":[17,119,253,0]}' from endpoint 1 with groupID 0
zigbee.1	2020-10-09 15:56:41.792	debug	(12346) handleMessage. {"type":"raw","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"deviceI
zigbee.1	2020-10-09 15:56:38.471	debug	(12346) Publish {"action":"middle_hold"}
zigbee.1	2020-10-09 15:56:38.464	debug	(12346) Type raw device {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"dev
zigbee.1	2020-10-09 15:56:38.463	debug	(12346) Received Zigbee message from '0xec1bbdfffe76d92a', type 'raw', cluster 'genOnOff', data '{"type":"Buffer","data":[17,118,253,2]}' from endpoint 2 with groupID 0
zigbee.1	2020-10-09 15:56:38.461	debug	(12346) handleMessage. {"type":"raw","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"deviceI
zigbee.1	2020-10-09 15:56:35.070	debug	(12346) Publish {"action":"left_hold"}
zigbee.1	2020-10-09 15:56:35.066	debug	(12346) Type raw device {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"dev
zigbee.1	2020-10-09 15:56:35.065	debug	(12346) Received Zigbee message from '0xec1bbdfffe76d92a', type 'raw', cluster 'genOnOff', data '{"type":"Buffer","data":[17,117,253,2]}' from endpoint 3 with groupID 0
zigbee.1	2020-10-09 15:56:35.064	debug	(12346) handleMessage. {"type":"raw","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"deviceI
zigbee.1	2020-10-09 15:56:31.648	debug	(12346) Publish {"action":"right_double"}
zigbee.1	2020-10-09 15:56:31.609	debug	(12346) Type raw device {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"dev
zigbee.1	2020-10-09 15:56:31.608	debug	(12346) Received Zigbee message from '0xec1bbdfffe76d92a', type 'raw', cluster 'genOnOff', data '{"type":"Buffer","data":[17,116,253,1]}' from endpoint 1 with groupID 0
zigbee.1	2020-10-09 15:56:31.606	debug	(12346) handleMessage. {"type":"raw","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"deviceI
zigbee.1	2020-10-09 15:56:30.292	debug	(12346) Publish {"action":"middle_double"}
zigbee.1	2020-10-09 15:56:30.288	debug	(12346) Type raw device {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"dev
zigbee.1	2020-10-09 15:56:30.287	debug	(12346) Received Zigbee message from '0xec1bbdfffe76d92a', type 'raw', cluster 'genOnOff', data '{"type":"Buffer","data":[17,115,253,1]}' from endpoint 2 with groupID 0
zigbee.1	2020-10-09 15:56:30.285	debug	(12346) handleMessage. {"type":"raw","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"deviceI
zigbee.1	2020-10-09 15:56:28.823	debug	(12346) Publish {"action":"left_double"}
zigbee.1	2020-10-09 15:56:28.815	debug	(12346) Type raw device {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"dev
zigbee.1	2020-10-09 15:56:28.814	debug	(12346) Received Zigbee message from '0xec1bbdfffe76d92a', type 'raw', cluster 'genOnOff', data '{"type":"Buffer","data":[17,114,253,1]}' from endpoint 3 with groupID 0
zigbee.1	2020-10-09 15:56:28.813	debug	(12346) handleMessage. {"type":"raw","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"deviceI
zigbee.1	2020-10-09 15:56:27.032	debug	(12346) Publish {"action":"right_single"}
zigbee.1	2020-10-09 15:56:27.011	debug	(12346) Type raw device {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"dev
zigbee.1	2020-10-09 15:56:27.010	debug	(12346) Received Zigbee message from '0xec1bbdfffe76d92a', type 'raw', cluster 'genOnOff', data '{"type":"Buffer","data":[17,113,253,0]}' from endpoint 1 with groupID 0
zigbee.1	2020-10-09 15:56:27.010	debug	(12346) handleMessage. {"type":"raw","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"deviceI
javascript.0	2020-10-09 15:56:26.644	info	(31849) script.js.common.BattUeberwachung: Reaching MakeTable
javascript.0	2020-10-09 15:56:26.643	info	(31849) script.js.common.BattUeberwachung: Reaching CheckDeadBatt()
zigbee.1	2020-10-09 15:56:25.978	debug	(12346) Publish {"action":"middle_single"}
zigbee.1	2020-10-09 15:56:25.974	debug	(12346) Type raw device {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"dev
zigbee.1	2020-10-09 15:56:25.973	debug	(12346) Received Zigbee message from '0xec1bbdfffe76d92a', type 'raw', cluster 'genOnOff', data '{"type":"Buffer","data":[17,112,253,0]}' from endpoint 2 with groupID 0
zigbee.1	2020-10-09 15:56:25.971	debug	(12346) handleMessage. {"type":"raw","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"deviceI
zigbee.1	2020-10-09 15:56:24.686	debug	(12346) Publish {"action":"left_single"}
zigbee.1	2020-10-09 15:56:24.682	debug	(12346) Type raw device {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"dev
zigbee.1	2020-10-09 15:56:24.680	debug	(12346) Received Zigbee message from '0xec1bbdfffe76d92a', type 'raw', cluster 'genOnOff', data '{"type":"Buffer","data":[17,111,253,0]}' from endpoint 3 with groupID 0
zigbee.1	2020-10-09 15:56:24.679	debug	(12346) handleMessage. {"type":"raw","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0xec1bbdfffe76d92a","_networkAddress":18300,"_manufacturerID":4098,"_endpoints":[{"ID":1,"profileID":260,"deviceI

[arteck]

@Holger-Etzel ok fehler erkannt.. muss im converter korrigiert werden.. musst dich gedulden

[sting]

Servus!
Bitte den Plug ZHS-15 von Schwaiger einbinden.
Danke!

[vikk88]

@arteck
ist es möglich bei dem Thermostat die Batterieanzeige einzufügen?

Habe gerade gemerkt dass das echt nützlich ist nachdem ich im Wohnzimmer 24 Grad hatte weil die Batterien leer waren und das Ventil sich geöffnet hat.:grin:

[Holger Etzel]

@arteck

Bin ja froh das was gefunden wurde und das du dich so intensiv darum kümmerst. Danke schön mal vorab

[memoire]

@arteck
Hallo,
könntest du bitte folgenden Adapter aufnehmen?

Zigbee ID: "ZG2833K8_EU05"
Wall Remote 8V
Model ROB_200-007-0 manufactured by ROBB eg. YPHIX (Product Code: 50208691)

Vielen Dank für deine tolle Arbeit bisher.

[hansjuri]

@arteck
Habe mir eine neue Zigbee Lampe gekauft und leider
Device 0xf0d1b8000013ab26 "Tibea TW Z3" not described in statesMapping
hier die Daten:
ieee:0xf0d1b8000013ab26
nwk:16470 (0x4056)
model:Tibea TW Z3

model:Tibea TW Z3
type:Router
nwk:16470
manuf id:4489
manufacturer:LEDVANCE
power:Mains (single phase)
app version:1
hard version:1
zcl version:2
stack version:2
date code:Nov 26 2018
build:00103101
interviewed:true
configured:false

endpoint:1
profile:260
input clusters:genBasic (0)
genIdentify (3)
genGroups (4)
genScenes (5)
genOnOff (6)
genLevelCtrl (8)
lightingColorCtrl (768)
haDiagnostic (2821)
touchlink (4096)
manuSpecificOsram (64527)
output clusters:genOta (25)
endpoint:242
profile:41440
output clusters:greenPower (33)

Danke schon mal im Voraus

[Thorsten B.]

@arteck

Hi,
wäre es möglich die FLAIR Viyu Smarte LED Kerze E14 von Hornbach aufzuhnemen?

Gruß und Danke

[zgadgeter]

@hansjuri Hallo, hattest Du die Lampe integriert bekommen? danke.

[Asgothian]

@hansjuri sagte in ZigBee neue/unbekannte Geräte - ab 1.3.0:

Tibea TW Z3

@zgadgeter sagte in ZigBee neue/unbekannte Geräte - ab 1.3.0:

@hansjuri Hallo, hattest Du die Lampe integriert bekommen? danke.

@Thorsten-B sagte in ZigBee neue/unbekannte Geräte - ab 1.3.0:
Hi,

wäre es möglich die FLAIR Viyu Smarte LED Kerze E14 von Hornbach aufzuhnemen?

Bisher ist die Lampe nicht bei zigbee2mqtt.io als supported gelistet. Es kann also etwas dauern bis sie geht.

A.

[hansjuri]

@zgadgeter noch nicht, siehst ja was Asgothian schreibt, habe aber kein Zeitproblem, wenn es irgendwann geht freu ich mich, Dank an Asgothian

[Jens Bräunel]

@arteck
leider bekomme ich immer noch kein Status für das click und double_click Event bei den Schaltern (Aqara WXKG06LM)

anbei noch das Log

zigbee.0	2020-10-18 10:51:53.164	debug	(23249) Publish {"action":"double"}
zigbee.0	2020-10-18 10:51:53.144	debug	(23249) Type attributeReport device {"type":"device","device":{"ID":3,"_type":"EndDevice","_ieeeAddr":"0x00158d000521d44b","_networkAddress":37267,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profile
zigbee.0	2020-10-18 10:51:53.140	debug	(23249) Received Zigbee message from '0x00158d000521d44b', type 'attributeReport', cluster 'genMultistateInput', data '{"presentValue":2}' from endpoint 1 with groupID 0
zigbee.0	2020-10-18 10:51:53.138	debug	(23249) handleMessage. {"type":"attributeReport","device":{"ID":3,"_type":"EndDevice","_ieeeAddr":"0x00158d000521d44b","_networkAddress":37267,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profileID":
zigbee.0	2020-10-18 10:51:47.154	debug	(23249) Publish {"action":"single"}
zigbee.0	2020-10-18 10:51:47.125	debug	(23249) Type attributeReport device {"type":"device","device":{"ID":3,"_type":"EndDevice","_ieeeAddr":"0x00158d000521d44b","_networkAddress":37267,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profile
zigbee.0	2020-10-18 10:51:47.120	debug	(23249) Received Zigbee message from '0x00158d000521d44b', type 'attributeReport', cluster 'genMultistateInput', data '{"presentValue":1}' from endpoint 1 with groupID 0
zigbee.0	2020-10-18 10:51:47.114	debug	(23249) handleMessage. {"type":"attributeReport","device":{"ID":3,"_type":"EndDevice","_ieeeAddr":"0x00158d000521d44b","_networkAddress":37267,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profileID":
zigbee.0	2020-10-18 10:49:15.932	debug	(23249) Publish {"action":"single"}
zigbee.0	2020-10-18 10:49:15.849	debug	(23249) Type attributeReport device {"type":"device","device":{"ID":3,"_type":"EndDevice","_ieeeAddr":"0x00158d000521d44b","_networkAddress":37267,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profile
zigbee.0	2020-10-18 10:49:15.834	debug	(23249) Received Zigbee message from '0x00158d000521d44b', type 'attributeReport', cluster 'genMultistateInput', data '{"presentValue":1}' from endpoint 1 with groupID 0
zigbee.0	2020-10-18 10:49:15.824	debug	(23249) handleMessage. {"type":"attributeReport","device":{"ID":3,"_type":"EndDevice","_ieeeAddr":"0x00158d000521d44b","_networkAddress":37267,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profileID":
zigbee.0	2020-10-18 10:49:09.486	debug	(23249) Publish available for 0x00158d000521d44b = true
zigbee.0	2020-10-18 10:49:09.454	debug	(23249) Publish available for 0x00158d0004652cf7 = true
zigbee.0	2020-10-18 10:49:08.498	info	(23249) Zigbee started
zigbee.0	2020-10-18 10:49:08.497	info	(23249) 0x00158d000521d44b (addr 37267): WXKG06LM - Xiaomi Aqara D1 single key wireless wall switch (EndDevice)
zigbee.0	2020-10-18 10:49:08.486	debug	(23249) New device event: {"type":"device","device":{"ID":3,"_type":"EndDevice","_ieeeAddr":"0x00158d000521d44b","_networkAddress":37267,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profileID":260,"d
zigbee.0	2020-10-18 10:49:08.472	info	(23249) 0x00158d0004652cf7 (addr 12940): WXKG06LM - Xiaomi Aqara D1 single key wireless wall switch (EndDevice)
zigbee.0	2020-10-18 10:49:08.470	debug	(23249) New device event: {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0x00158d0004652cf7","_networkAddress":12940,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profileID":260,"d
zigbee.0	2020-10-18 10:49:08.452	debug	(23249) DeviceConfigure 0x00158d000521d44b lumi.remote.b186acn02 not needed
zigbee.0	2020-10-18 10:49:08.440	debug	(23249) DeviceConfigure 0x00158d0004652cf7 lumi.remote.b186acn02 not needed
zigbee.0	2020-10-18 10:49:08.439	debug	(23249) Publish available for 0x00158d000521d44b = true
zigbee.0	2020-10-18 10:49:08.433	debug	(23249) Publish available for 0x00158d0004652cf7 = true
zigbee.0	2020-10-18 10:49:08.428	info	(23249) Currently 2 devices are joined:
zigbee.0	2020-10-18 10:49:08.387	info	(23249) --> transmitPower : high
zigbee.0	2020-10-18 10:49:08.365	debug	(23249) Zigbee network parameters: {"panID":1305,"extendedPanID":"0xddddddddddddddda","channel":11}
zigbee.0	2020-10-18 10:49:08.346	info	(23249) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190608}}
zigbee.0	2020-10-18 10:49:08.340	debug	(23249) zigbee-herdsman started
zigbee.0	2020-10-18 10:49:05.300	debug	(23249) Backup /opt/iobroker/iobroker-data/zigbee_0/backup_2020_10_18-10_49_04.tar.gz success
zigbee.0	2020-10-18 10:49:04.672	debug	(23249) Starting zigbee-herdsman...
zigbee.0	2020-10-18 10:49:04.670	info	(23249) Starting Zigbee...
zigbee.0	2020-10-18 10:49:04.543	debug	(23249) Using zigbee-herdsman with settings: {"network":{"panID":1305,"extendedPanID":[218,221,221,221,221,221,221,221],"channelList":[11],"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,10]},"databa
zigbee.0	2020-10-18 10:49:04.470	info	(23249) starting. Version 1.3.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.18.4, js-controller: 3.1.6

Vielen Dank für deine Unterstützung.

[luesec]

@arteck
Hallo habe eine Außenlampe von Paulmann die noch nicht erkannt wird.
Wäre super wenn diese kurzfristig bekannt gemacht werden könnte.

https://de.paulmann.com/aussenleuchten/gartenbeleuchtung-system/leuchten/plug-und-shine-lichtobjekt-globe-rgbw-smart-home-zigbee-2-8w-24v/94269

Vielen Dank für eure Mühe
Gruß luesec

PS: Hab ich erst bestellt und daher noch keine näheren Daten. Denke aber der Paulmann Zigbee Outdoorcontroller fehlt auch noch:
https://de.paulmann.com/aussenleuchten/gartenbeleuchtung-system/steuerung/plug-und-shine-smart-home-zigbee-controller-ip68-24v-dc-max-75w-schwarz/93999
Werde die Daten dann noch mal posten wenn er da ist und ihr proaktiv noch nichts machen könnt ;-) -> EDIT 22.10. der Outdoorcontroller ist gekommen und wird erkannt. Scheint der gleiche zu sein wie indoor nur anderes gehäuse ;-) . Fehlt nur noch die Lampe.

[stefan.cloer]

@arteck leider ist auch der optische Rauchmelder AV2010/24A von bitron noch nicht eingebunden:
https://manuals.smabit.eu/lde/av2010_24a.html

Vielen Dank im Voraus und für die bisher geleistete Arbeit

[kamikazemimmi]

Hallo zusammen,

bei uns werden 2 Philips Hue Lampen nicht richtig erkannt.

Erst mal unsere Zigbee Version / Revision:

zigbee.0	2020-10-21 14:49:48.818	info	(12165) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190608}}
zigbee.0	2020-10-21 14:49:46.458	info	(12165) Starting Zigbee...
zigbee.0	2020-10-21 14:49:46.244	info	(12165) starting. Version 1.3.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.18.4, js-controller: 3.1.6

hier die Infos der Hue Fuzo Wall Lantern Outdoor

Link:
https://www.philips-hue.com/de-de/p/hue-white-fuzo-wandleuchte/1744530P7

Und die Hue Discover:

Link:
https://www.coolshop.de/produkt/philips-hue-discover-black-outdoor-weiss-farbe-ambiance/AH7EN9/

Ich hoffe, ich habe nichts vergessen:hugging_face:

LG

[lu1043201]

Re: ZigBee neue/unbekannte Geräte - ab 1.3.0

Hallo,

mein Sunricher Schaltaktor (sr-zg9101sac-hp-switch) wird nicht richtig erkannt.

Zigbee Version/Revision: 20190608

link zum Produkt

Bei zigbee2mqtt unter supported devices ist Produkt dabei.
Wäre super, wenn dies eingebunden werden kann.

Danke schon im voraus.

@Asgothian
Habe eben erst jetzt gesehen, dass "sein Bruder" (ZG9101SAC-HP) welcher dimmbar bereits verfügbar ist. Vielleicht macht es die Sache etwas einfacher. Danke bereits!

@arteck
Vielen Dank fürs Aufnehmen. Kriege noch ein "not described in states mapping... undefined" nach dem neu-pairen (nach reset des Aktors).

Danke für die Bemühungen!