Zigbee Instanz rot nach node.js Update auf v12.18.4 [Gelöst]

Thomas Braun

sudo apt update

sagt jetzt, dass alle Pakete aktuell seien? Oder wird da noch was zurückgehalten?

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy
sudo apt update
sagt jetzt, dass alle Pakete aktuell seien? Oder wird da noch was zurückgehalten?

pi@raspberrypi:~ $ sudo apt update
OK:1 http://archive.raspberrypi.org/debian stretch InRelease
OK:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease
OK:3 https://deb.nodesource.com/node_12.x stretch InRelease
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Alle Pakete sind aktuell.

Thomas Braun

@birdy
Gut, passt.
Jetzt müssen wir nochmal nach 'canvas' schauen.

cd /opt/iobroker
npm i canvas

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy
Gut, passt.
Jetzt müssen wir nochmal nach 'canvas' schauen.
cd /opt/iobroker
npm i canvas

Da scheint noch was im Argen zu sein...

pi@raspberrypi:~ $ cd /opt/iobroker
pi@raspberrypi:/opt/iobroker $ npm i canvas

> canvas@2.6.1 install /opt/iobroker/node_modules/canvas
> node-pre-gyp install --fallback-to-build

node-pre-gyp WARN Using request for node-pre-gyp https download
node-pre-gyp WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.6.1/canvas-v2.6.1-node-v72-linux-glibc-arm.tar.gz
node-pre-gyp WARN Pre-built binaries not found for canvas@2.6.1 and node@12.18.4 (node-v72 ABI, glibc) (falling back to source compile with node-gyp)
make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird betreten
  SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node
  COPY Release/canvas-postbuild.node
  CXX(target) Release/obj.target/canvas/src/backend/Backend.o
  CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o
  CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o
In file included from ../src/backend/PdfBackend.h:4:0,
                 from ../src/backend/PdfBackend.cc:1:
../src/backend/../closure.h:6:21: fatal error: jpeglib.h: Datei oder Verzeichnis nicht gefunden
 #include <jpeglib.h>
                     ^
compilation terminated.
canvas.target.mk:142: die Regel für Ziel „Release/obj.target/canvas/src/backend/PdfBackend.o“ scheiterte
make: *** [Release/obj.target/canvas/src/backend/PdfBackend.o] Fehler 1
make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird verlassen
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack     at ChildProcess.emit (events.js:315:20)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12)
gyp ERR! System Linux 4.19.66-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "build" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=6" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v72"
gyp ERR! cwd /opt/iobroker/node_modules/canvas
gyp ERR! node -v v12.18.4
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=6 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v72' (1)
node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/canvas/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:315:20)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:1021:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:286:5)
node-pre-gyp ERR! System Linux 4.19.66-v7+
node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/canvas/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
node-pre-gyp ERR! node -v v12.18.4
node-pre-gyp ERR! node-pre-gyp -v v0.11.0
node-pre-gyp ERR! not ok
Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=6 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v72' (1)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! canvas@2.6.1 install: `node-pre-gyp install --fallback-to-build`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the canvas@2.6.1 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2020-09-20T19_00_07_883Z-debug.log
pi@raspberrypi:/opt/iobroker $

Thomas Braun

@birdy sagte in Zigbee Instanz rot nach node.js Update auf v12.18.4:

jpeglib.h

apt policy libgdcm2-dev

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy sagte in Zigbee Instanz rot nach node.js Update auf v12.18.4:

jpeglib.h
apt policy libgdcm2-dev

pi@raspberrypi:/opt/iobroker $ apt policy libgdcm2-dev
libgdcm2-dev:
  Installiert:           2.6.6-3
  Installationskandidat: 2.6.6-3
  Versionstabelle:
 *** 2.6.6-3 500
        500 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages
        100 /var/lib/dpkg/status
pi@raspberrypi:/opt/iobroker $

Thomas Braun

@birdy

sudo apt install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy

sudo apt install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev

pi@raspberrypi:/opt/iobroker $ sudo apt install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
build-essential ist schon die neueste Version (12.3).
libpango1.0-dev ist schon die neueste Version (1.40.5-1).
libcairo2-dev ist schon die neueste Version (1.14.8-1+rpi1).
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
  coinor-libipopt1v5 libmumps-seq-4.10.0 libraw15 realpath
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Vorgeschlagene Pakete:
  librsvg2-doc
Die folgenden NEUEN Pakete werden installiert:
  gir1.2-rsvg-2.0 libgdk-pixbuf2.0-dev libgif-dev libjpeg-dev
  libjpeg62-turbo-dev librsvg2-dev
0 aktualisiert, 6 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 447 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 1.409 kB Plattenplatz zusätzlich benutzt.
Holen:1 http://mirror.inode.at/raspbian/raspbian stretch/main armhf gir1.2-rsvg-2.0 armhf 2.40.21-0+deb9u1 [15,3 kB]
Holen:2 http://mirror.inode.at/raspbian/raspbian stretch/main armhf libgdk-pixbuf2.0-dev armhf 2.36.5-2+deb9u2 [53,8 kB]
Holen:3 http://mirror.inode.at/raspbian/raspbian stretch/main armhf libgif-dev armhf 5.1.4-0.4 [43,0 kB]
Holen:4 http://mirror.inode.at/raspbian/raspbian stretch/main armhf libjpeg62-turbo-dev armhf 1:1.5.1-2+deb9u1 [179 kB]
Holen:5 http://mirror.inode.at/raspbian/raspbian stretch/main armhf libjpeg-dev all 1:1.5.1-2+deb9u1 [56,5 kB]
Holen:6 http://mirror.inode.at/raspbian/raspbian stretch/main armhf librsvg2-dev armhf 2.40.21-0+deb9u1 [99,4 kB]
Es wurden 447 kB in 1 s geholt (338 kB/s).
Vormals nicht ausgewähltes Paket gir1.2-rsvg-2.0:armhf wird gewählt.
(Lese Datenbank ... 133212 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../0-gir1.2-rsvg-2.0_2.40.21-0+deb9u1_armhf.deb ...
Entpacken von gir1.2-rsvg-2.0:armhf (2.40.21-0+deb9u1) ...
Vormals nicht ausgewähltes Paket libgdk-pixbuf2.0-dev wird gewählt.
Vorbereitung zum Entpacken von .../1-libgdk-pixbuf2.0-dev_2.36.5-2+deb9u2_armhf.deb ...
Entpacken von libgdk-pixbuf2.0-dev (2.36.5-2+deb9u2) ...
Vormals nicht ausgewähltes Paket libgif-dev wird gewählt.
Vorbereitung zum Entpacken von .../2-libgif-dev_5.1.4-0.4_armhf.deb ...
Entpacken von libgif-dev (5.1.4-0.4) ...
Vormals nicht ausgewähltes Paket libjpeg62-turbo-dev:armhf wird gewählt.
Vorbereitung zum Entpacken von .../3-libjpeg62-turbo-dev_1%3a1.5.1-2+deb9u1_armhf.deb ...
Entpacken von libjpeg62-turbo-dev:armhf (1:1.5.1-2+deb9u1) ...
Vormals nicht ausgewähltes Paket libjpeg-dev wird gewählt.
Vorbereitung zum Entpacken von .../4-libjpeg-dev_1%3a1.5.1-2+deb9u1_all.deb ...
Entpacken von libjpeg-dev (1:1.5.1-2+deb9u1) ...
Vormals nicht ausgewähltes Paket librsvg2-dev:armhf wird gewählt.
Vorbereitung zum Entpacken von .../5-librsvg2-dev_2.40.21-0+deb9u1_armhf.deb ...
Entpacken von librsvg2-dev:armhf (2.40.21-0+deb9u1) ...
libgif-dev (5.1.4-0.4) wird eingerichtet ...
libgdk-pixbuf2.0-dev (2.36.5-2+deb9u2) wird eingerichtet ...
gir1.2-rsvg-2.0:armhf (2.40.21-0+deb9u1) wird eingerichtet ...
Trigger für man-db (2.7.6.1-2) werden verarbeitet ...
libjpeg62-turbo-dev:armhf (1:1.5.1-2+deb9u1) wird eingerichtet ...
librsvg2-dev:armhf (2.40.21-0+deb9u1) wird eingerichtet ...
libjpeg-dev (1:1.5.1-2+deb9u1) wird eingerichtet ...
pi@raspberrypi:/opt/iobroker $

Thomas Braun

@birdy
Dann schau nochmal, ob canvas nun baut:

cd /opt/iobroker
npm i canvas

Thomas Braun

@birdy

sudo apt autoremove

haut die Meldungen über die nicht mehr benötigten Pakete weg.

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy
sudo apt autoremove
haut die Meldungen über die nicht mehr benötigten Pakete weg.

Schaut gut aus...

pi@raspberrypi:/opt/iobroker $ npm i canvas

> canvas@2.6.1 install /opt/iobroker/node_modules/canvas
> node-pre-gyp install --fallback-to-build

node-pre-gyp WARN Using request for node-pre-gyp https download
node-pre-gyp WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.6.1/canvas-v2.6.1-node-v72-linux-glibc-arm.tar.gz
node-pre-gyp WARN Pre-built binaries not found for canvas@2.6.1 and node@12.18.4 (node-v72 ABI, glibc) (falling back to source compile with node-gyp)
make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird betreten
  SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node
  COPY Release/canvas-postbuild.node
  CXX(target) Release/obj.target/canvas/src/backend/Backend.o
  CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o
  CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o
  CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o
  CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o
../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’:
../src/bmp/BMPParser.cc:189:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data > imgdOffset, "image data overlaps with another structure");
     ~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
../src/bmp/BMPParser.cc:204:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data + imgdSize > len, "not enough image data");
     ~~~~~~~~~~~~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
  CXX(target) Release/obj.target/canvas/src/Backends.o
  CXX(target) Release/obj.target/canvas/src/Canvas.o
../src/Canvas.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Canvas::ToBuffer(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/Canvas.cc:415:26: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
     if (canvas->nBytes() > node::Buffer::kMaxLength) {
         ~~~~~~~~~~~~~~~~~^~~~~~
  CXX(target) Release/obj.target/canvas/src/CanvasGradient.o
  CXX(target) Release/obj.target/canvas/src/CanvasPattern.o
  CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o
  CXX(target) Release/obj.target/canvas/src/closure.o
  CXX(target) Release/obj.target/canvas/src/color.o
  CXX(target) Release/obj.target/canvas/src/Image.o
  CXX(target) Release/obj.target/canvas/src/ImageData.o
  CXX(target) Release/obj.target/canvas/src/init.o
  CXX(target) Release/obj.target/canvas/src/register_font.o
  SOLINK_MODULE(target) Release/obj.target/canvas.node
  COPY Release/canvas.node
make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird verlassen
+ canvas@2.6.1
added 6 packages from 15 contributors in 176.083s

20 packages are looking for funding
  run `npm fund` for details

pi@raspberrypi:/opt/iobroker $

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy
sudo apt autoremove
haut die Meldungen über die nicht mehr benötigten Pakete weg.

pi@raspberrypi:/opt/iobroker $ sudo apt autoremove
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete werden ENTFERNT:
  coinor-libipopt1v5 libmumps-seq-4.10.0 libraw15 realpath
0 aktualisiert, 0 neu installiert, 4 zu entfernen und 0 nicht aktualisiert.
Nach dieser Operation werden 9.219 kB Plattenplatz freigegeben.
Möchten Sie fortfahren? [J/n] J
(Lese Datenbank ... 133294 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von coinor-libipopt1v5 (3.11.9-2.1) ...
Entfernen von libmumps-seq-4.10.0 (4.10.0.dfsg-4+b1) ...
Entfernen von libraw15:armhf (0.17.2-6+deb9u1) ...
Entfernen von realpath (8.26-3) ...
Trigger für libc-bin (2.24-11+deb9u4) werden verarbeitet ...
pi@raspberrypi:/opt/iobroker $

Thomas Braun

@birdy
Dann müsste dein System jetzt sauber sein.

iobroker update
iobroker upgrade

meckert jetzt nix mehr an?

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy
Dann müsste dein System jetzt sauber sein.
iobroker update
iobroker upgrade
meckert jetzt nix mehr an?

pi@raspberrypi:/opt/iobroker $ iobroker update
Used repository: default
hash unchanged, use cached sources
update done
Adapter    "admin"         : 4.0.10   , installed 4.0.10
Adapter    "alarm"         : 1.2.3
Adapter    "alexa2"        : 3.3.1    , installed 3.3.1
Adapter    "alpha2"        : 1.0.0
Adapter    "amazon-dash"   : 1.1.0
Adapter    "artnet"        : 1.2.2
Adapter    "asterisk"      : 1.0.6
Adapter    "asuswrt"       : 1.0.1
Adapter    "b-control-em"  : 0.2.1
Adapter    "backitup"      : 1.6.7    , installed 1.6.7
Adapter    "beckhoff"      : 1.2.2
Adapter    "benq"          : 0.2.0
Adapter    "binance"       : 1.1.3
Adapter    "ble"           : 0.11.8
Adapter    "bmw"           : 1.3.3
Adapter    "bosesoundtouch": 0.2.4
Adapter    "botvac"        : 1.0.0
Adapter    "bring"         : 1.7.2
Adapter    "broadlink2"    : 2.0.3    , installed 2.0.3
Adapter    "bsblan"        : 0.1.5
Adapter    "bshb"          : 0.1.10
Adapter    "chromecast"    : 2.3.1
Adapter    "cloud"         : 3.0.4    , installed 3.0.4
Adapter    "comfoair"      : 0.3.2
Adapter    "contactid"     : 1.0.1
Adapter    "coronavirus-statistics": 0.6.0
Adapter    "countdown"     : 1.1.0
Adapter    "cul"           : 1.2.1
Adapter    "daikin"        : 1.0.5
Adapter    "daswetter"     : 3.0.1    , installed 3.0.1
Adapter    "deconz"        : 1.3.10
Adapter    "denon"         : 1.7.7
Adapter    "devices"       : 0.3.6
Adapter    "digitalstrom"  : 0.5.5
Adapter    "discovergy"    : 0.5.0
Adapter    "discovery"     : 2.3.7    , installed 2.3.7
Adapter    "doorio"        : 1.0.10
Adapter    "ds18b20"       : 1.1.4
Adapter    "dwd"           : 2.4.10
Adapter    "ebus"          : 2.1.1
Adapter    "ecovacs-deebot": 1.0.3
Adapter    "egigeozone"    : 0.1.2
Adapter    "ekey"          : 1.1.0
Adapter    "email"         : 1.0.7
Adapter    "emby"          : 1.0.2
Adapter    "energymanager" : 1.2.3
Adapter    "enet"          : 1.0.1
Adapter    "epson_stylus_px830": 0.2.1
Adapter    "exchangerates" : 0.0.13
Adapter    "fakeroku"      : 0.2.1
Adapter    "fb-checkpresence": 1.0.4
Adapter    "feiertage"     : 1.0.17
Adapter    "fhem"          : 1.5.3
Adapter    "find-my-iphone": 0.2.15
Adapter    "firetv"        : 0.0.27
Adapter    "flot"          : 1.9.2    , installed 1.9.2
Adapter    "foobar2000"    : 2.0.3
Adapter    "fritzbox"      : 0.2.1
Adapter    "fritzdect"     : 0.2.4
Adapter    "fronius"       : 1.0.5
Adapter    "fullcalendar"  : 1.1.0
Adapter    "fullybrowser"  : 2.0.1
Adapter    "g-homa"        : 0.5.3
Adapter    "geofency"      : 0.3.2
Adapter    "gruenbeck"     : 0.0.18
Adapter    "habpanel"      : 0.4.3
Adapter    "haier"         : 1.0.2
Adapter    "ham"           : 1.1.2
Adapter    "ham-wemo"      : 1.0.1
Adapter    "harmony"       : 1.2.2
Adapter    "heatingcontrol": 0.5.7
Adapter    "heytech"       : 0.2.0
Adapter    "hid"           : 0.1.17
Adapter    "history"       : 1.9.10   , installed 1.9.10
Adapter    "hm-rega"       : 2.6.14
Adapter    "hm-rpc"        : 1.14.15
Adapter    "hmip"          : 1.2.2
Adapter    "homeconnect"   : 0.0.30
Adapter    "homee"         : 1.0.7
Adapter    "homepilot"     : 1.0.3
Adapter    "hp-ilo"        : 1.0.6
Adapter    "hs100"         : 2.0.1
Adapter    "hue"           : 3.3.5
Adapter    "hue-extended"  : 2.0.0
Adapter    "ical"          : 1.7.4
Adapter    "icons-addictive-flavour-png": 0.1.0
Adapter    "icons-fatcow-hosting": 0.1.0
Adapter    "icons-icons8"  : 0.0.1
Adapter    "icons-material-png": 0.1.0
Adapter    "icons-material-svg": 0.1.0
Adapter    "icons-mfd-png" : 1.0.2
Adapter    "icons-mfd-svg" : 1.0.2
Adapter    "icons-open-icon-library-png": 0.1.2
Adapter    "icons-ultimate-png": 1.0.1   , installed 1.0.1
Adapter    "influxdb"      : 1.9.1
Adapter    "info"          : 1.7.2    , installed 1.7.2
Adapter    "innogy-smarthome": 0.3.6
Adapter    "iogo"          : 0.5.10
Adapter    "iot"           : 1.5.3    , installed 1.5.3
Adapter    "iqontrol"      : 1.2.4
Adapter    "javascript"    : 4.6.17   , installed 4.6.17
Adapter    "jeelink"       : 0.1.0
Controller "js-controller" : 3.1.6    , installed 3.1.6
Adapter    "kecontact"     : 0.1.0
Adapter    "klf200"        : 1.0.1
Adapter    "km200"         : 1.1.6
Adapter    "knmi-weather"  : 1.0.0
Adapter    "knx"           : 1.0.39
Adapter    "kodi"          : 2.0.4
Adapter    "kress"         : 2.5.5
Adapter    "lametric"      : 0.0.9
Adapter    "landroid"      : 1.0.3
Adapter    "lcn"           : 0.3.2
Adapter    "letrika_comgw" : 0.0.5
Adapter    "lgtv"          : 1.1.10
Adapter    "lgtv-rs"       : 0.1.0
Adapter    "lgtv11"        : 1.0.5
Adapter    "lifx"          : 0.1.0
Adapter    "lightify"      : 0.2.16
Adapter    "link"          : 0.5.9
Adapter    "linkeddevices" : 1.2.2
Adapter    "logparser"     : 1.0.4
Adapter    "lovelace"      : 1.0.16
Adapter    "loxone"        : 1.1.0
Adapter    "luftdaten"     : 0.0.17
Adapter    "lupusec"       : 1.2.6
Adapter    "luxtronik1"    : 0.2.2
Adapter    "material"      : 0.13.9
Adapter    "maxcube"       : 0.1.2
Adapter    "maxcul"        : 1.3.0
Adapter    "mbus"          : 2.2.2
Adapter    "mclighting"    : 0.1.1
Adapter    "megad"         : 1.2.1
Adapter    "megadd"        : 0.2.0
Adapter    "megaesp"       : 0.1.0
Adapter    "melcloud"      : 1.0.6
Adapter    "mercedesme"    : 0.0.21
Adapter    "mercury"       : 0.1.1
Adapter    "meross"        : 1.5.0
Adapter    "meteoalarm"    : 1.0.9
Adapter    "midea"         : 0.0.6
Adapter    "miele"         : 0.1.5
Adapter    "mielecloudservice": 2.0.0
Adapter    "mihome"        : 1.3.0
Adapter    "mihome-lamp"   : 1.1.0
Adapter    "mihome-plug"   : 0.2.0
Adapter    "mihome-vacuum" : 2.0.7
Adapter    "mikrotik"      : 1.0.11
Adapter    "milight"       : 0.3.6
Adapter    "milight-smart-light": 0.2.7
Adapter    "mobile"        : 1.0.1
Adapter    "modbus"        : 3.1.6
Adapter    "moma"          : 1.2.6
Adapter    "mpd"           : 1.0.5
Adapter    "mqtt"          : 2.1.4    , installed 2.1.4
Adapter    "mqtt-client"   : 1.3.1
Adapter    "musiccast"     : 0.1.3
Adapter    "mysensors"     : 2.0.1
Adapter    "nanoleaf-lightpanels": 0.8.1
Adapter    "nello"         : 2.0.6
Adapter    "netatmo"       : 1.3.1
Adapter    "nibeuplink"    : 0.3.0
Adapter    "nina"          : 0.0.22
Adapter    "node-red"      : 1.17.2
Adapter    "nuki"          : 1.3.1
Adapter    "nuki-extended" : 2.3.0
Adapter    "nut"           : 1.1.3
Adapter    "odl"           : 1.0.5
Adapter    "oilfox"        : 0.0.5
Adapter    "onkyo"         : 2.0.3
Adapter    "onvif"         : 0.4.4
Adapter    "openhab"       : 1.1.0
Adapter    "openligadb"    : 1.1.0
Adapter    "openweathermap": 0.1.0
Adapter    "opi"           : 0.1.1
Adapter    "oppoplayer"    : 0.2.1
Adapter    "owfs"          : 0.6.4
Adapter    "owntracks"     : 0.6.3
Adapter    "panasonic-viera": 1.0.2
Adapter    "parser"        : 1.0.7    , installed 1.0.7
Adapter    "paw"           : 0.0.7
Adapter    "phantomjs"     : 1.0.1
Adapter    "pi-hole"       : 1.3.1
Adapter    "piface"        : 1.0.0
Adapter    "pimatic"       : 0.3.0
Adapter    "ping"          : 1.4.8    , installed 1.4.8
Adapter    "places"        : 1.0.0
Adapter    "plex"          : 0.8.11
Adapter    "plexconnect"   : 0.0.7
Adapter    "pollenflug"    : 1.0.6
Adapter    "proxmox"       : 1.0.1
Adapter    "proxy"         : 1.1.1
Adapter    "pushbullet"    : 0.0.11
Adapter    "pushover"      : 2.0.2
Adapter    "pushsafer"     : 0.1.8
Adapter    "radar2"        : 1.0.9
Adapter    "radiohead"     : 1.0.7
Adapter    "rflink"        : 2.0.0
Adapter    "rickshaw"      : 1.0.0    , installed 1.0.0
Adapter    "ring"          : 1.1.3
Adapter    "robonect"      : 0.1.3
Adapter    "roomba"        : 1.1.1
Adapter    "rpi2"          : 1.2.0
Adapter    "s7"            : 1.1.8
Adapter    "samsung"       : 0.2.9
Adapter    "sayit"         : 1.9.8
Adapter    "sbfspot"       : 4.0.0
Adapter    "scenes"        : 1.1.0    , installed 1.1.0
Adapter    "schoolfree"    : 0.6.3
Adapter    "shelly"        : 4.0.2
Adapter    "shuttercontrol": 0.8.6
Adapter    "sia"           : 1.0.4
Adapter    "siegenia"      : 1.0.0
Adapter    "simple-api"    : 2.4.6    , installed 2.4.6
Adapter    "smappee"       : 0.2.2
Adapter    "smartgarden"   : 1.0.1
Adapter    "smartmeter"    : 3.1.2
Adapter    "snips"         : 1.5.1
Adapter    "snmp"          : 0.5.0
Adapter    "socketio"      : 3.0.13   , installed 3.0.13
Adapter    "solarlog"      : 2.0.0
Adapter    "solarviewdatareader": 0.2.1
Adapter    "solarwetter"   : 1.0.0
Adapter    "sonnen"        : 1.6.0
Adapter    "sonoff"        : 2.3.3    , installed 2.3.3
Adapter    "sonos"         : 2.1.0
Adapter    "sony-bravia"   : 1.0.1
Adapter    "spotify-premium": 1.0.0
Adapter    "sql"           : 1.15.2   , installed 1.15.2
Adapter    "squeezebox"    : 1.0.0
Adapter    "squeezeboxrpc" : 1.0.0
Adapter    "starline"      : 1.0.0
Adapter    "statistics"    : 0.2.2
Adapter    "stiebel-isg"   : 1.5.1
Adapter    "sunnyportal"   : 0.1.5
Adapter    "swiss-weather-api": 0.3.2
Adapter    "synology"      : 0.1.18
Adapter    "systeminfo"    : 0.3.1
Adapter    "tahoma"        : 0.3.2
Adapter    "tankerkoenig"  : 2.0.5
Adapter    "telegram"      : 1.5.9    , installed 1.5.9
Adapter    "terminal"      : 0.1.2    , installed 0.1.2
Adapter    "tesla-motors"  : 0.2.3
Adapter    "text2command"  : 1.3.0    , installed 1.3.0
Adapter    "tinker"        : 1.1.0
Adapter    "tr-064"        : 4.0.9
Adapter    "tradfri"       : 2.6.3
Adapter    "trashschedule" : 0.0.11
Adapter    "tunnelbroker-endpoint-updater": 0.0.1
Adapter    "tuya"          : 3.3.12
Adapter    "tvspielfilm"   : 1.0.4
Adapter    "unifi"         : 0.5.8
Adapter    "upnp"          : 1.0.16
Adapter    "vaillant"      : 0.0.10
Adapter    "valloxmv"      : 1.1.1
Adapter    "vcard"         : 0.0.9
Adapter    "velux"         : 0.0.5
Adapter    "viessmann"     : 1.3.0
Adapter    "virtualpowermeter": 1.2.1
Adapter    "vis"           : 1.2.12   , installed 1.2.12
Adapter    "vis-bars"      : 0.1.4
Adapter    "vis-canvas-gauges": 0.1.5
Adapter    "vis-colorpicker": 1.1.1
Adapter    "vis-fancyswitch": 1.1.0   , installed 1.1.0
Adapter    "vis-google-fonts": 0.1.0
Adapter    "vis-history"   : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets" : 1.1.4    , installed 1.1.4
Adapter    "vis-icontwo"   : 0.19.0
Adapter    "vis-inventwo"  : 1.3.8
Adapter    "vis-jqui-mfd"  : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage"  : 1.0.2
Adapter    "vis-keyboard"  : 0.0.2
Adapter    "vis-lcars"     : 1.0.4
Adapter    "vis-map"       : 1.0.4
Adapter    "vis-metro"     : 1.1.2    , installed 1.1.2
Adapter    "vis-players"   : 0.1.6
Adapter    "vis-plumb"     : 1.0.2
Adapter    "vis-rgraph"    : 0.0.2
Adapter    "vis-timeandweather": 1.1.7   , installed 1.1.7
Adapter    "vis-weather"   : 2.5.2    , installed 2.5.2
Adapter    "vr200"         : 1.0.0
Adapter    "vw-connect"    : 0.0.15
Adapter    "weatherunderground": 3.2.1   , installed 3.2.1
Adapter    "web"           : 3.0.12   , installed 3.0.12
Adapter    "weishaupt-wem" : 0.0.8
Adapter    "wiffi-wz"      : 2.2.0
Adapter    "wifilight"     : 1.1.0
Adapter    "windows-control": 0.1.5
Adapter    "wled"          : 0.5.2
Adapter    "wm-bus"        : 0.1.12
Adapter    "wolf"          : 0.9.2
Adapter    "worx"          : 1.2.3
Adapter    "xbox"          : 0.6.5
Adapter    "xs1"           : 1.0.2
Adapter    "yahka"         : 0.11.0
Adapter    "yamaha"        : 0.3.19
Adapter    "yeelight-2"    : 1.0.3
Adapter    "youtube"       : 0.0.11
Adapter    "yr"            : 2.0.3    , installed 2.0.3
Adapter    "zigbee"        : 1.2.1    , installed 1.2.1
Adapter    "zont"          : 0.5.3
Adapter    "zwave"         : 2.0.1
Adapter    "zwave2"        : 1.5.0
pi@raspberrypi:/opt/iobroker $ iobroker upgrade
Adapter "admin"          is up to date.
Adapter "alarm"          is not installed.
Adapter "alexa2"         is up to date.
Adapter "alpha2"         is not installed.
Adapter "amazon-dash"    is not installed.
Adapter "artnet"         is not installed.
Adapter "asterisk"       is not installed.
Adapter "asuswrt"        is not installed.
Adapter "b-control-em"   is not installed.
Adapter "backitup"       is up to date.
Adapter "beckhoff"       is not installed.
Adapter "benq"           is not installed.
Adapter "binance"        is not installed.
Adapter "ble"            is not installed.
Adapter "bmw"            is not installed.
Adapter "bosesoundtouch" is not installed.
Adapter "botvac"         is not installed.
Adapter "bring"          is not installed.
Adapter "broadlink2"     is up to date.
Adapter "bsblan"         is not installed.
Adapter "bshb"           is not installed.
Adapter "chromecast"     is not installed.
Adapter "cloud"          is up to date.
Adapter "comfoair"       is not installed.
Adapter "contactid"      is not installed.
Adapter "coronavirus-statistics" is not installed.
Adapter "countdown"      is not installed.
Adapter "cul"            is not installed.
Adapter "daikin"         is not installed.
Adapter "daswetter"      is up to date.
Adapter "deconz"         is not installed.
Adapter "denon"          is not installed.
Adapter "devices"        is not installed.
Adapter "digitalstrom"   is not installed.
Adapter "discovergy"     is not installed.
Adapter "discovery"      is up to date.
Adapter "doorio"         is not installed.
Adapter "ds18b20"        is not installed.
Adapter "dwd"            is not installed.
Adapter "ebus"           is not installed.
Adapter "ecovacs-deebot" is not installed.
Adapter "egigeozone"     is not installed.
Adapter "ekey"           is not installed.
Adapter "email"          is not installed.
Adapter "emby"           is not installed.
Adapter "energymanager"  is not installed.
Adapter "enet"           is not installed.
Adapter "epson_stylus_px830" is not installed.
Adapter "exchangerates"  is not installed.
Adapter "fakeroku"       is not installed.
Adapter "fb-checkpresence" is not installed.
Adapter "feiertage"      is not installed.
Adapter "fhem"           is not installed.
Adapter "find-my-iphone" is not installed.
Adapter "firetv"         is not installed.
Adapter "flot"           is up to date.
Adapter "foobar2000"     is not installed.
Adapter "fritzbox"       is not installed.
Adapter "fritzdect"      is not installed.
Adapter "fronius"        is not installed.
Adapter "fullcalendar"   is not installed.
Adapter "fullybrowser"   is not installed.
Adapter "g-homa"         is not installed.
Adapter "geofency"       is not installed.
Adapter "gruenbeck"      is not installed.
Adapter "habpanel"       is not installed.
Adapter "haier"          is not installed.
Adapter "ham"            is not installed.
Adapter "ham-wemo"       is not installed.
Adapter "harmony"        is not installed.
Adapter "heatingcontrol" is not installed.
Adapter "heytech"        is not installed.
Adapter "hid"            is not installed.
Adapter "history"        is up to date.
Adapter "hm-rega"        is not installed.
Adapter "hm-rpc"         is not installed.
Adapter "hmip"           is not installed.
Adapter "homeconnect"    is not installed.
Adapter "homee"          is not installed.
Adapter "homepilot"      is not installed.
Adapter "hp-ilo"         is not installed.
Adapter "hs100"          is not installed.
Adapter "hue"            is not installed.
Adapter "hue-extended"   is not installed.
Adapter "ical"           is not installed.
Adapter "icons-addictive-flavour-png" is not installed.
Adapter "icons-fatcow-hosting" is not installed.
Adapter "icons-icons8"   is not installed.
Adapter "icons-material-png" is not installed.
Adapter "icons-material-svg" is not installed.
Adapter "icons-mfd-png"  is not installed.
Adapter "icons-mfd-svg"  is not installed.
Adapter "icons-open-icon-library-png" is not installed.
Adapter "icons-ultimate-png" is up to date.
Adapter "influxdb"       is not installed.
Adapter "info"           is up to date.
Adapter "innogy-smarthome" is not installed.
Adapter "iogo"           is not installed.
Adapter "iot"            is up to date.
Adapter "iqontrol"       is not installed.
Adapter "javascript"     is up to date.
Adapter "jeelink"        is not installed.
Adapter "kecontact"      is not installed.
Adapter "klf200"         is not installed.
Adapter "km200"          is not installed.
Adapter "knmi-weather"   is not installed.
Adapter "knx"            is not installed.
Adapter "kodi"           is not installed.
Adapter "kress"          is not installed.
Adapter "lametric"       is not installed.
Adapter "landroid"       is not installed.
Adapter "lcn"            is not installed.
Adapter "letrika_comgw"  is not installed.
Adapter "lgtv"           is not installed.
Adapter "lgtv-rs"        is not installed.
Adapter "lgtv11"         is not installed.
Adapter "lifx"           is not installed.
Adapter "lightify"       is not installed.
Adapter "link"           is not installed.
Adapter "linkeddevices"  is not installed.
Adapter "logparser"      is not installed.
Adapter "lovelace"       is not installed.
Adapter "loxone"         is not installed.
Adapter "luftdaten"      is not installed.
Adapter "lupusec"        is not installed.
Adapter "luxtronik1"     is not installed.
Adapter "material"       is not installed.
Adapter "maxcube"        is not installed.
Adapter "maxcul"         is not installed.
Adapter "mbus"           is not installed.
Adapter "mclighting"     is not installed.
Adapter "megad"          is not installed.
Adapter "megadd"         is not installed.
Adapter "megaesp"        is not installed.
Adapter "melcloud"       is not installed.
Adapter "mercedesme"     is not installed.
Adapter "mercury"        is not installed.
Adapter "meross"         is not installed.
Adapter "meteoalarm"     is not installed.
Adapter "midea"          is not installed.
Adapter "miele"          is not installed.
Adapter "mielecloudservice" is not installed.
Adapter "mihome"         is not installed.
Adapter "mihome-lamp"    is not installed.
Adapter "mihome-plug"    is not installed.
Adapter "mihome-vacuum"  is not installed.
Adapter "mikrotik"       is not installed.
Adapter "milight"        is not installed.
Adapter "milight-smart-light" is not installed.
Adapter "mobile"         is not installed.
Adapter "modbus"         is not installed.
Adapter "moma"           is not installed.
Adapter "mpd"            is not installed.
Adapter "mqtt"           is up to date.
Adapter "mqtt-client"    is not installed.
Adapter "musiccast"      is not installed.
Adapter "mysensors"      is not installed.
Adapter "nanoleaf-lightpanels" is not installed.
Adapter "nello"          is not installed.
Adapter "netatmo"        is not installed.
Adapter "nibeuplink"     is not installed.
Adapter "nina"           is not installed.
Adapter "node-red"       is not installed.
Adapter "nuki"           is not installed.
Adapter "nuki-extended"  is not installed.
Adapter "nut"            is not installed.
Adapter "odl"            is not installed.
Adapter "oilfox"         is not installed.
Adapter "onkyo"          is not installed.
Adapter "onvif"          is not installed.
Adapter "openhab"        is not installed.
Adapter "openligadb"     is not installed.
Adapter "openweathermap" is not installed.
Adapter "opi"            is not installed.
Adapter "oppoplayer"     is not installed.
Adapter "owfs"           is not installed.
Adapter "owntracks"      is not installed.
Adapter "panasonic-viera" is not installed.
Adapter "parser"         is up to date.
Adapter "paw"            is not installed.
Adapter "phantomjs"      is not installed.
Adapter "pi-hole"        is not installed.
Adapter "piface"         is not installed.
Adapter "pimatic"        is not installed.
Adapter "ping"           is up to date.
Adapter "places"         is not installed.
Adapter "plex"           is not installed.
Adapter "plexconnect"    is not installed.
Adapter "pollenflug"     is not installed.
Adapter "proxmox"        is not installed.
Adapter "proxy"          is not installed.
Adapter "pushbullet"     is not installed.
Adapter "pushover"       is not installed.
Adapter "pushsafer"      is not installed.
Adapter "radar2"         is not installed.
Adapter "radiohead"      is not installed.
Adapter "rflink"         is not installed.
Adapter "rickshaw"       is up to date.
Adapter "ring"           is not installed.
Adapter "robonect"       is not installed.
Adapter "roomba"         is not installed.
Adapter "rpi2"           is not installed.
Adapter "s7"             is not installed.
Adapter "samsung"        is not installed.
Adapter "sayit"          is not installed.
Adapter "sbfspot"        is not installed.
Adapter "scenes"         is up to date.
Adapter "schoolfree"     is not installed.
Adapter "shelly"         is not installed.
Adapter "shuttercontrol" is not installed.
Adapter "sia"            is not installed.
Adapter "siegenia"       is not installed.
Adapter "simple-api"     is up to date.
Adapter "smappee"        is not installed.
Adapter "smartgarden"    is not installed.
Adapter "smartmeter"     is not installed.
Adapter "snips"          is not installed.
Adapter "snmp"           is not installed.
Adapter "socketio"       is up to date.
Adapter "solarlog"       is not installed.
Adapter "solarviewdatareader" is not installed.
Adapter "solarwetter"    is not installed.
Adapter "sonnen"         is not installed.
Adapter "sonoff"         is up to date.
Adapter "sonos"          is not installed.
Adapter "sony-bravia"    is not installed.
Adapter "spotify-premium" is not installed.
Adapter "sql"            is up to date.
Adapter "squeezebox"     is not installed.
Adapter "squeezeboxrpc"  is not installed.
Adapter "starline"       is not installed.
Adapter "statistics"     is not installed.
Adapter "stiebel-isg"    is not installed.
Adapter "sunnyportal"    is not installed.
Adapter "swiss-weather-api" is not installed.
Adapter "synology"       is not installed.
Adapter "systeminfo"     is not installed.
Adapter "tahoma"         is not installed.
Adapter "tankerkoenig"   is not installed.
Adapter "telegram"       is up to date.
Adapter "terminal"       is up to date.
Adapter "tesla-motors"   is not installed.
Adapter "text2command"   is up to date.
Adapter "tinker"         is not installed.
Adapter "tr-064"         is not installed.
Adapter "tradfri"        is not installed.
Adapter "trashschedule"  is not installed.
Adapter "tunnelbroker-endpoint-updater" is not installed.
Adapter "tuya"           is not installed.
Adapter "tvspielfilm"    is not installed.
Adapter "unifi"          is not installed.
Adapter "upnp"           is not installed.
Adapter "vaillant"       is not installed.
Adapter "valloxmv"       is not installed.
Adapter "vcard"          is not installed.
Adapter "velux"          is not installed.
Adapter "viessmann"      is not installed.
Adapter "virtualpowermeter" is not installed.
Adapter "vis"            is up to date.
Adapter "vis-bars"       is not installed.
Adapter "vis-canvas-gauges" is not installed.
Adapter "vis-colorpicker" is not installed.
Adapter "vis-fancyswitch" is up to date.
Adapter "vis-google-fonts" is not installed.
Adapter "vis-history"    is up to date.
Adapter "vis-hqwidgets"  is up to date.
Adapter "vis-icontwo"    is not installed.
Adapter "vis-inventwo"   is not installed.
Adapter "vis-jqui-mfd"   is up to date.
Adapter "vis-justgage"   is not installed.
Adapter "vis-keyboard"   is not installed.
Adapter "vis-lcars"      is not installed.
Adapter "vis-map"        is not installed.
Adapter "vis-metro"      is up to date.
Adapter "vis-players"    is not installed.
Adapter "vis-plumb"      is not installed.
Adapter "vis-rgraph"     is not installed.
Adapter "vis-timeandweather" is up to date.
Adapter "vis-weather"    is up to date.
Adapter "vr200"          is not installed.
Adapter "vw-connect"     is not installed.
Adapter "weatherunderground" is up to date.
Adapter "web"            is up to date.
Adapter "weishaupt-wem"  is not installed.
Adapter "wiffi-wz"       is not installed.
Adapter "wifilight"      is not installed.
Adapter "windows-control" is not installed.
Adapter "wled"           is not installed.
Adapter "wm-bus"         is not installed.
Adapter "wolf"           is not installed.
Adapter "worx"           is not installed.
Adapter "xbox"           is not installed.
Adapter "xs1"            is not installed.
Adapter "yahka"          is not installed.
Adapter "yamaha"         is not installed.
Adapter "yeelight-2"     is not installed.
Adapter "youtube"        is not installed.
Adapter "yr"             is up to date.
Adapter "zigbee"         is up to date.
Adapter "zont"           is not installed.
Adapter "zwave"          is not installed.
Adapter "zwave2"         is not installed.
pi@raspberrypi:/opt/iobroker $

Perfekt! :)

Thomas Braun

@birdy
Gut.
Schau mal mit

npm list canvas

nach, ob das Modul auch drin ist.
Und dann künftig etwas regelmäßiger updaten/upgraden, dann ist das auch wesentlich weniger komplex.

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

npm list canvas

pi@raspberrypi:/opt/iobroker $ npm list canvas
iobroker.inst@1.0.8 /opt/iobroker
├── canvas@2.6.1
└─┬ iobroker.iot@1.5.3
  └── canvas@2.6.1  deduped

pi@raspberrypi:/opt/iobroker $

Danke, danke, danke und nochmal danke für deine Hilfe und die Zeit, die du investiert hast! Ich hätte das niemlas geschafft, nicht mal ansatzweise...

Thomas Braun

@birdy
Was mir gerade noch einfällt (Wegen der Pakete im autoremove)
In welchem RunLevel läuft die Kiste eigentlich?

who -r

Wenn da runlevel 5 kommt (und die Kiste keinen Desktop benötigt, weil du da eh nur per SSH draufgehst), dann stell auf RL3 um.

birdy

@Thomas-Braun

Sorry, war gestern nicht mehr online und sitze jetzt im Büro...

Werde am Abend den Runlevel kontrollieren, aber den Desktop möchte ich mir schon behalten, da ich manchmal über VNC auf den Raspi zugreife.

Thomas Braun

@birdy sagte in Zigbee Instanz rot nach node.js Update auf v12.18.4 [Gelöst]:

Werde am Abend den Runlevel kontrollieren, aber den Desktop möchte ich mir schon behalten, da ich manchmal über VNC auf den Raspi zugreife.

Rate ich von ab. Wie du gesehen hast administriert man das System über SSH / Kommandozeile. VNC ist unnötiger Overhead.

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy sagte in Zigbee Instanz rot nach node.js Update auf v12.18.4 [Gelöst]:

Werde am Abend den Runlevel kontrollieren, aber den Desktop möchte ich mir schon behalten, da ich manchmal über VNC auf den Raspi zugreife.

Rate ich von ab. Wie du gesehen hast administriert man das System über SSH / Kommandozeile. VNC ist unnötiger Overhead.

Ja, ist schon klar. Aber ich habe ja nicht immer jemanden wie dich parat, der mich an der Hand zur Problemlösung führt... ;) Und wenn ich mal kurz etwas nachsehen will (Dateimanager), ist VNC für mich dann angenehmer, als Kommandozeilenbefehle einzutippen.

Community Forum

NEWS

Zigbee Instanz rot nach node.js Update auf v12.18.4 [Gelöst]

Support us

745

32.6k

82.2k

1.3m