Zigbee Instanz rot nach node.js Update auf v12.18.4 [Gelöst]

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy
Seltsamerweise ist bei mir dissolve gar nicht installiert:
pi@raspberrypi:/opt/iobroker $ npm list dissolve
iobroker.inst@2.0.3 /opt/iobroker
└── (empty)

Das bedeutet was? :)

Thomas Braun

@birdy
Das du da ggf. irgendeine Leiche im Keller hast. Denn wir haben soweit ich das sehe ganz ähnliche Adapter installiert. Was liefert denn der Befehl auf deinem System?

birdy

@birdy

Es würde mir ja schon reichen, wenn ich den Adapter weg bekomme und wieder neu installieren könnte... :cold_sweat:

Thomas Braun

@birdy
Dann musst du halt irgendwo anfangen das Gebilde zu sanieren.

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy
Das du da ggf. irgendeine Leiche im Keller hast. Denn wir haben soweit ich das sehe ganz ähnliche Adapter installiert. Was liefert denn der Befehl auf deinem System?

pi@raspberrypi:/opt/iobroker $ npm list dissolve
iobroker.inst@1.0.8 /opt/iobroker
└─┬ iobroker.zigbee@0.10.2
  └─┬ zigbee-shepherd@0.3.0
    └─┬ zcl-packet@0.2.4
      └─┬ dissolve-chunks@1.3.0
        └── dissolve@0.3.3

Was sagt diese Meldung aus?

Thomas Braun

@birdy sagte in Zigbee Instanz rot nach node.js Update auf v12.18.4:

cd /opt/iobroker
npm i iobroker.zigbee@1.2.1

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy sagte in Zigbee Instanz rot nach node.js Update auf v12.18.4:
cd /opt/iobroker
npm i iobroker.zigbee@1.2.1

Hab aber vergessen, iobroker zu stoppen... Schlecht?

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.1.2 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@^1.0.5 (node_modules/iobroker.info/node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: concentrate@^0.2.3 (node_modules/unpi/node_modules/concentrate):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported engine for concentrate@0.2.3: wanted: {"node":"~0.10.0"} (current: {"node":"12.18.4","npm":"6.14.6"})
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Not compatible with your version of node/npm: concentrate@0.2.3

npm ERR! code ENOTSUP
npm ERR! notsup Unsupported engine for dissolve@0.3.3: wanted: {"node":"~0.10.0"} (current: {"node":"12.18.4","npm":"6.14.6"})
npm ERR! notsup Not compatible with your version of node/npm: dissolve@0.3.3
npm ERR! notsup Not compatible with your version of node/npm: dissolve@0.3.3
npm ERR! notsup Required: {"node":"~0.10.0"}
npm ERR! notsup Actual:   {"npm":"6.14.6","node":"12.18.4"}

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2020-09-20T16_27_48_926Z-debug.log

Thomas Braun

@birdy
Versuch mal dissolve rauszukicken.
Ein aktuelles zigbee benötigt das nicht mehr.

npm uninstall dissolve

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy
Versuch mal dissolve rauszukicken.
Ein akutelles zigbee benötigt das nicht mehr.
npm uninstall dissolve

vorher iobroker stoppen?

Thomas Braun

@birdy
Kannst du machen.

Thomas Braun

@birdy sagte in Zigbee Instanz rot nach node.js Update auf v12.18.4:

npm uninstall dissolve

Wenn das nicht klappt versuch mal mit

npm uninstall dissolve --save

birdy

@Thomas-Braun

pi@raspberrypi:/opt/iobroker $ npm uninstall dissolve
npm WARN deprecated json3@3.3.2: Please use the native JSON object instead of JSON 3

> canvas@2.6.1 install /opt/iobroker/node_modules/canvas
> node-pre-gyp install --fallback-to-build

node-pre-gyp WARN Using request for node-pre-gyp https download
node-pre-gyp WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.6.1/canvas-v2.6.1-node-v72-linux-glibc-arm.tar.gz
node-pre-gyp WARN Pre-built binaries not found for canvas@2.6.1 and node@12.18.4 (node-v72 ABI, glibc) (falling back to source compile with node-gyp)
Package cairo was not found in the pkg-config search path.
Perhaps you should add the directory containing `cairo.pc'
to the PKG_CONFIG_PATH environment variable
No package 'cairo' found
gyp: Call to 'pkg-config cairo --libs' returned exit status 1 while in binding.gyp. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack     at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:351:16)
gyp ERR! stack     at ChildProcess.emit (events.js:315:20)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12)
gyp ERR! System Linux 4.19.66-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=6" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v72"
gyp ERR! cwd /opt/iobroker/node_modules/canvas
gyp ERR! node -v v12.18.4
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=6 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v72' (1)
node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/canvas/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:315:20)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:1021:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:286:5)
node-pre-gyp ERR! System Linux 4.19.66-v7+
node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/canvas/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
node-pre-gyp ERR! node -v v12.18.4
node-pre-gyp ERR! node-pre-gyp -v v0.11.0
node-pre-gyp ERR! not ok
Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=6 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v72' (1)

> sharp@0.25.2 install /opt/iobroker/node_modules/sharp
> (node install/libvips && node install/dll-copy && prebuild-install --runtime=napi) || (node-gyp rebuild && node install/dll-copy)

ERR! sharp Use with glibc 2.24 requires manual installation of libvips >= 8.9.1
info sharp Attempting to build from source via node-gyp but this may fail due to the above error
info sharp Please see https://sharp.pixelplumbing.com/install for required dependencies
make: Verzeichnis „/opt/iobroker/node_modules/sharp/build“ wird betreten
  CC(target) Release/obj.target/nothing/../node-addon-api/src/nothing.o
  AR(target) Release/obj.target/../node-addon-api/src/nothing.a
  COPY Release/nothing.a
  TOUCH Release/obj.target/libvips-cpp.stamp
  CXX(target) Release/obj.target/sharp/src/common.o
../src/common.cc:23:22: fatal error: vips/vips8: Datei oder Verzeichnis nicht gefunden
 #include <vips/vips8>
                      ^
compilation terminated.
sharp.target.mk:138: die Regel für Ziel „Release/obj.target/sharp/src/common.o“ scheiterte
make: *** [Release/obj.target/sharp/src/common.o] Fehler 1
make: Verzeichnis „/opt/iobroker/node_modules/sharp/build“ wird verlassen
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack     at ChildProcess.emit (events.js:315:20)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12)
gyp ERR! System Linux 4.19.66-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/sharp
gyp ERR! node -v v12.18.4
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok

> iobroker@1.0.8 install /opt/iobroker/node_modules/iobroker
> node lib/setup.js

NPM version: 6.14.8

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
NPM 5 is currently NOT supported!
Please use "npm install -g npm@4" to downgrade npm to 4.x and try again.
You need to make sure to downgrade again with the above command after you
installed an update to nodejs/npm!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@^1.0.5 (node_modules/iobroker.info/node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.1.2 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: concentrate@^0.2.3 (node_modules/unpi/node_modules/concentrate):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported engine for concentrate@0.2.3: wanted: {"node":"~0.10.0"} (current: {"node":"12.18.4","npm":"6.14.6"})
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Not compatible with your version of node/npm: concentrate@0.2.3
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: canvas@2.6.1 (node_modules/canvas):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: canvas@2.6.1 install: `node-pre-gyp install --fallback-to-build`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: sharp@0.25.2 (node_modules/sharp):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: sharp@0.25.2 install: `(node install/libvips && node install/dll-copy && prebuild-install --runtime=napi) || (node-gyp rebuild && node install/dll-copy)`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! iobroker@1.0.8 install: `node lib/setup.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the iobroker@1.0.8 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2020-09-20T16_36_28_808Z-debug.log

birdy

@Thomas-Braun

So nebenbei möchte ich mich mal bei dir für die Zeit, die du in den fall investierst, bedanken!

Thomas Braun

@birdy
Wie gesagt: Viele viele Baustellen.
Vermutlich geht das schneller, wenn du das System komplett neuinstallierst (Buster) und dann dein Backup in den ioBroker einspielst.

birdy

@Thomas-Braun

aber jetzt ganz schlimm:

pi@raspberrypi:/opt/iobroker $ start iobroker
-bash: start: Kommando nicht gefunden.

Glasfaser

@birdy

iobroker start

Thomas Braun

@birdy
Nö. Das heißt ja auch

iobroker start

birdy

@Thomas-Braun said in Zigbee Instanz rot nach node.js Update auf v12.18.4:

@birdy
Nö. Das heißt ja auch
iobroker start

Sorry, bin schon etwas durch den Wind...

Thomas Braun

@birdy
Die Meldung bzgl. cairo dürfest du mit

sudo apt install libcairo2-dev

schon mal loswerden. Ändert aber nix am Umfang der Großbaustelle.

birdy

@Thomas-Braun

Aber was soll ich jetzt mit dem deistallierten dissolve machen?

Nochmal?

npm i iobroker.zigbee@1.2.1

Community Forum

NEWS

Zigbee Instanz rot nach node.js Update auf v12.18.4 [Gelöst]

Support us

723

32.6k

82.2k

1.3m