Iobroker startet nicht mehr...System has not been booted...
-
@SmartesHome Du hast keine Backup? Das ist schlecht...
Welche Hardware da involivert ist wissen wir aber immer noch nicht. -
@SmartesHome sagte:
daher wäre eine Lösung für eine Art Backup total hilfreich...
Falls der Ordner /opt/iobroker/iobroker-data im PC noch von der SD Card lesbar ist, besteht eine Chance.
-
@paul53 Via Putty kann ich noch drauf zugreifen...PC muss ich gleich mal testen.
@Thomas-Braun Was meinst du mit der Hardware?
-
@SmartesHome Auf was für einem System der iobroker läuft.
Desktopsystem, Raspberrypi, einem NAS, auf der Kaffeemaschine... -
@Thomas-Braun Er läuft auf einem Raspberry Pi 4
-
@paul53 Also vom PC aus sehe ich diesen Ordner nicht
-
@SmartesHome Per ssh/putty kommst du noch auf die Kiste drauf?
Dann gib mir mal die Ausgabe vondmesg -
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.97-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1294 SMP Thu Jan 30 13:21:14 GMT 2020 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000 [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s36928 r8192 d24512 u69632 [ 0.000000] pcpu-alloc: s36928 r8192 d24512 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=DC:A6:32:46:B6:62 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 3735564K/4050944K available (8192K kernel code, 687K rwdata, 2408K rodata, 2048K init, 850K bss, 53236K reserved, 262144K cma-reserved, 3264512K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (10208 kB) .init : 0x(ptrval) - 0x(ptrval) (2048 kB) .data : 0x(ptrval) - 0x(ptrval) ( 688 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 851 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 28692 entries in 85 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000017] Switching to timer-based delay loop, resolution 18ns [ 0.000242] Console: colour dummy device 80x30 [ 0.000266] console [tty1] enabled [ 0.000311] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000327] pid_max: default: 32768 minimum: 301 [ 0.000598] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000616] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001374] CPU: Testing write buffer coherency: ok [ 0.001782] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002433] Setting up static identity map for 0x200000 - 0x20003c [ 0.002591] rcu: Hierarchical SRCU implementation. [ 0.003451] smp: Bringing up secondary CPUs ... [ 0.004260] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005201] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006102] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006239] smp: Brought up 1 node, 4 CPUs [ 0.006252] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.006261] CPU: All CPU(s) started in HYP mode. [ 0.006270] CPU: Virtualization extensions available. [ 0.007064] devtmpfs: initialized [ 0.017408] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.017617] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.017637] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.025133] pinctrl core: initialized pinctrl subsystem [ 0.025981] NET: Registered protocol family 16 [ 0.028934] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.030417] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.030427] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.030620] Serial: AMBA PL011 UART driver [ 0.033685] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.050037] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-02-12 12:36, variant start [ 0.060052] raspberrypi-firmware soc:firmware: Firmware hash is c3c8dbdf147686fb0c3f32aece709d0653368810 [ 0.103058] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.106250] vgaarb: loaded [ 0.106605] SCSI subsystem initialized [ 0.106806] usbcore: registered new interface driver usbfs [ 0.106858] usbcore: registered new interface driver hub [ 0.106924] usbcore: registered new device driver usb [ 0.108209] clocksource: Switched to clocksource arch_sys_counter [ 0.186855] VFS: Disk quotas dquot_6.6.0 [ 0.186940] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.187080] FS-Cache: Loaded [ 0.187259] CacheFiles: Loaded [ 0.187778] simple-framebuffer: probe of 0.framebuffer failed with error -12 [ 0.196642] NET: Registered protocol family 2 [ 0.197307] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.197333] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.197400] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.197470] TCP: Hash tables configured (established 8192 bind 8192) [ 0.197593] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.197621] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.197840] NET: Registered protocol family 1 [ 0.198463] RPC: Registered named UNIX socket transport module. [ 0.198473] RPC: Registered udp transport module. [ 0.198482] RPC: Registered tcp transport module. [ 0.198492] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.198507] PCI: CLS 0 bytes, default 64 [ 0.201549] Initialise system trusted keyrings [ 0.201711] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.210772] FS-Cache: Netfs 'nfs' registered for caching [ 0.211291] NFS: Registering the id_resolver key type [ 0.211314] Key type id_resolver registered [ 0.211323] Key type id_legacy registered [ 0.211342] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.213602] Key type asymmetric registered [ 0.213612] Asymmetric key parser 'x509' registered [ 0.213723] bounce: pool size: 64 pages [ 0.213766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.213934] io scheduler noop registered [ 0.213945] io scheduler deadline registered (default) [ 0.214103] io scheduler cfq registered [ 0.214114] io scheduler mq-deadline registered (default) [ 0.214124] io scheduler kyber registered [ 0.245231] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000 [ 0.245250] brcm-pcie fd500000.pcie: could not get clock [ 0.245311] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.245349] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000 [ 0.298239] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC) [ 0.298514] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.298531] pci_bus 0000:00: root bus resource [bus 00-01] [ 0.298547] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 0.298590] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.298729] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.301444] PCI: bus0: Fast back to back transfers disabled [ 0.301462] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.301665] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.301789] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.302106] pci 0000:01:00.0: PME# supported from D0 D3cold [ 0.304816] PCI: bus1: Fast back to back transfers disabled [ 0.304832] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01 [ 0.304879] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.304898] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.304969] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.304985] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.305200] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 0.305375] pcieport 0000:00:00.0: Signaling PME with IRQ 53 [ 0.305532] pcieport 0000:00:00.0: AER enabled with IRQ 53 [ 0.305699] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 0.309783] iproc-rng200 fe104000.rng: hwrng registered [ 0.310001] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.310508] vc-sm: Videocore shared memory driver [ 0.310898] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 0.321083] brd: module loaded [ 0.330664] loop: module loaded [ 0.331408] Loading iSCSI transport class v2.0-870. [ 0.333083] libphy: Fixed MDIO Bus: probed [ 0.333500] bcmgenet fd580000.genet: failed to get enet clock [ 0.333516] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000 [ 0.333533] bcmgenet fd580000.genet: failed to get enet-wol clock [ 0.333549] bcmgenet fd580000.genet: failed to get enet-eee clock [ 0.333571] bcmgenet: Skipping UMAC reset [ 0.333802] unimac-mdio unimac-mdio.-19: DMA mask not set [ 0.358238] libphy: bcmgenet MII bus: probed [ 0.398745] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval) [ 0.399659] usbcore: registered new interface driver r8152 [ 0.399727] usbcore: registered new interface driver lan78xx [ 0.399785] usbcore: registered new interface driver smsc95xx [ 0.400086] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.400116] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.402331] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890 [ 0.402634] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 54 [ 0.403490] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.403505] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.403517] usb usb1: Product: xHCI Host Controller [ 0.403529] usb usb1: Manufacturer: Linux 4.19.97-v7l+ xhci-hcd [ 0.403540] usb usb1: SerialNumber: 0000:01:00.0 [ 0.404045] hub 1-0:1.0: USB hub found [ 0.404123] hub 1-0:1.0: 1 port detected [ 0.404588] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.404610] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.404629] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.404989] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 0.405002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.405014] usb usb2: Product: xHCI Host Controller [ 0.405025] usb usb2: Manufacturer: Linux 4.19.97-v7l+ xhci-hcd [ 0.405036] usb usb2: SerialNumber: 0000:01:00.0 [ 0.405512] hub 2-0:1.0: USB hub found [ 0.405576] hub 2-0:1.0: 4 ports detected [ 0.406770] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.406960] dwc_otg: FIQ enabled [ 0.406969] dwc_otg: NAK holdoff enabled [ 0.406977] dwc_otg: FIQ split-transaction FSM enabled [ 0.406990] Module dwc_common_port init [ 0.407199] usbcore: registered new interface driver uas [ 0.407295] usbcore: registered new interface driver usb-storage [ 0.407476] mousedev: PS/2 mouse device common for all mice [ 0.408669] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.410104] sdhci: Secure Digital Host Controller Interface driver [ 0.410113] sdhci: Copyright(c) Pierre Ossman [ 0.410510] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 0.410909] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.413926] ledtrig-cpu: registered to indicate activity on CPUs [ 0.414081] hidraw: raw HID events driver (C) Jiri Kosina [ 0.414201] usbcore: registered new interface driver usbhid [ 0.414210] usbhid: USB HID core driver [ 0.414973] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 0.416694] [vc_sm_connected_init]: start [ 0.425567] [vc_sm_connected_init]: end - returning 0 [ 0.426714] Initializing XFRM netlink socket [ 0.426743] NET: Registered protocol family 17 [ 0.426830] Key type dns_resolver registered [ 0.427156] Registering SWP/SWPB emulation handler [ 0.427745] registered taskstats version 1 [ 0.427761] Loading compiled-in X.509 certificates [ 0.434766] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 0.434828] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 [ 0.439894] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 0.440427] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver [ 0.441061] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.441073] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 0.467117] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3 [ 0.467196] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4 [ 0.488400] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.490010] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.491617] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.494496] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.496102] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.500909] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 0.503275] of_cfs_init [ 0.503435] of_cfs_init: OK [ 0.504045] Waiting for root device PARTUUID=ea7d04d6-02... [ 0.549495] random: fast init done [ 0.602831] mmc0: new ultra high speed DDR50 SDXC card at address aaaa [ 0.604016] mmcblk0: mmc0:aaaa SN64G 59.5 GiB [ 0.605800] mmc1: new high speed SDIO card at address 0001 [ 0.606208] mmcblk0: p1 p2 [ 0.620891] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 0.620902] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 0.768251] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 0.950892] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 0.950907] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 0.950919] usb 1-1: Product: USB2.0 Hub [ 0.952550] hub 1-1:1.0: USB hub found [ 0.952839] hub 1-1:1.0: 4 ports detected [ 1.040132] EXT4-fs (mmcblk0p2): recovery complete [ 1.061989] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.062035] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.066182] devtmpfs: mounted [ 1.073873] Freeing unused kernel memory: 2048K [ 1.074115] Run /sbin/init as init process [ 2.936095] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff [ 2.939220] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff [ 2.945129] systemd-udevd[264]: Using default interface naming scheme 'v240'. [ 2.945900] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff [ 2.947655] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff [ 2.965168] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 2.967329] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 2.967344] [vc_sm_connected_init]: start [ 2.974507] [vc_sm_connected_init]: installed successfully [ 2.980349] media: Linux media interface: v0.10 [ 3.012069] videodev: Linux video capture interface: v2.00 [ 3.044825] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.063292] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.070903] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 3.079173] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 3.098430] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 3.098465] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 3.099253] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.108142] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 3.108340] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 3.109702] bcm2835_audio soc:audio: card created with 8 channels [ 3.113834] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 3.113865] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 3.267791] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.316891] [drm] No displays found. Consider forcing hotplug if HDMI is attached [ 3.316991] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 3.317775] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1 [ 3.317788] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.317797] [drm] No driver support for vblank timestamp query. [ 3.317807] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL [ 3.346854] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 3.382626] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.437355] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 3.449952] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 3.450581] usbcore: registered new interface driver brcmfmac [ 3.690161] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 3.703438] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2 [ 3.761680] systemd-udevd[262]: Using default interface naming scheme 'v240'. [ 4.766319] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.963239] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.366433] i2c /dev entries driver [ 7.505825] random: dd: uninitialized urandom read (512 bytes read) [ 8.826878] 8021q: 802.1Q VLAN Support v1.8 [ 9.007806] brcmfmac: power management disabled [ 103.608311] random: crng init done [ 103.704231] bcmgenet: Skipping UMAC reset [ 103.798630] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay) [ 104.264335] NET: Registered protocol family 10 [ 104.265051] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 104.265144] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 104.265363] Segment Routing with IPv6 [ 104.444195] Bluetooth: Core ver 2.22 [ 104.444232] NET: Registered protocol family 31 [ 104.444236] Bluetooth: HCI device and connection manager initialized [ 104.444246] Bluetooth: HCI socket layer initialized [ 104.444254] Bluetooth: L2CAP socket layer initialized [ 104.444273] Bluetooth: SCO socket layer initialized [ 104.485786] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 104.485792] Bluetooth: BNEP filters: protocol multicast [ 104.485802] Bluetooth: BNEP socket layer initialized [ 104.808304] bcmgenet fd580000.genet eth0: Link is Down [ 106.378022] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 108.968489] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 108.968533] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 110.479143] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms insteadMOD-Edit: Code in code-tags gesetzt!
-
@SmartesHome Soweit nix auffälliges vom Kernel.
Was passiert beiiobroker status -
@paul53 Über WINSCP komme ich nun in die Verzeichnisse und könnte Dateien sichern.Ich müsste nur wissen, was ich sichern muss und wie ich sie im Fall des Falles wiederherstellen kann.
-
iobroker is not running on this host. No iobroker host is running. Objects type: file States type: file -
-
/dev/mmcblk0p2 on / type ext4 (rw,noatime) devtmpfs on /dev type devtmpfs (rw,relatime,size=1867780k,nr_inodes=117763,mode=755) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=399976k,mode=755) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) configfs on /sys/kernel/config type configfs (rw,relatime) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=799940k) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) /dev/mmcblk0p1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro) -
@SmartesHome Passt. Kann es sein, dass du die Kiste unlängst mal nicht sauber heruntergefahren hast (hart vom Strom genommen)?
iobroker startbringt die obige Meldung, vermute ich?
-
@Thomas-Braun
Eigentlich nicht möglich, dass der Pi hart vom Strom genommen wurde, da er aneiner USV hängt. Die Meldung kam nachdem ich heute mit einem OTA-Flashtool für Tasmota gearbeitet habe.Dann kommt die Eingangsmeldung:
System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Der Rechner ist nicht aktivIch denke, ichsollte die Karte saber formatieren und das System neu aufsetzen...Habe ja nun Zugriff auf die Dateien und kopiere gerade erstmal das iobroker-data verzeichnis. Ich weiß nur nicht, ob ichdie Dateien später einfach wieder drüber kopieren muss oder wie und welche ichwieder integrieren sollte.
-
@Thomas-Braun ...und vor allem wo ich die Dateien der Visualisierung finde?
-
@SmartesHome Keine Ahnung, hab kein vis.
systemctl status iobroker -
@Thomas-Braun Da kommt wieder die Eingangsmeldung
-
mount | grep systemd -
@Thomas-Braun Keine Meldung
