Beta Test js-controller 3.0.x auf GitHub

e-i-k-e

@apollon77
Habe gerade festgestellt, dass sich die Javascript Adapter auf den Slave Geräten, ab und zu neustarten.

Anbei die Log-Datei von einem Slave.

Jan1

@Homer-J
War das nur ein Test mit Node13?

In der Doku steht dick und rot das dazu:
ungerade nodejs-Versionen sind grundsätzlich nicht empfohlen, da es sich um Entwicklerversionen handelt.

Homer.J.

@Jan1 war ein Test von mir da z.B. der Yahka Adapter in der 12 Version nicht tut, in der 13 läuft bei mir alles wunderbar deshalb lass ich es so.
Grüße

Jan1

@Homer-J
Kann funktionieren, muss aber nicht. In ein paar Tagen kommt die 14 raus und da solltest noch mal "testen". Denn wenn in der 12er was drin ist, das den Yahka stört und in der 13er nicht, dann sollte die finale 14er auch laufen und das stabiler als die 13er.

Homer.J.

@Jan1 mach ich dafür sind ja Tests da. Hab immer ein Klon von meinem stabilen System kann also jederzeit zurück.

ilovegym

@apollon77
Hi, All

Nachdem auf den Raspi-Clients (mit Debian9, Octopi, RaspiZero(ArmV6)) alles ohne Probleme mit Node12 und js-controller 3.0.8 lief, habe ich, nachdem auf dem Testsystem mit dem Backup vom Prod.System keine nennenswerten Fehler auftraten, es gewagt, mein Produktiv auf Node12 und js-controller 3.0.8 zu ziehen.

Es laufen bis auf 2 Adapter alle. Den iot und amazon-dash musste ich mit iobroker rebuild nochmal compilieren.
@AlCalzone Es zickt der Ble-Adapter in Version 0.11.1 (auch nochmal frisch von Git gezogen), Issue ist angelegt.
@Omega236 Es geht garnicht der Virtualpowermeter Adapter, man kann ihn starten, aber wenn ein device auf true-on wechselt, kommen fehler und der Adapter beendet sich. ( Issue bereits angelegt)

Bin mal gespannt, wie es morgen aussieht, ansonsten gehts zum Snapshot zurueck...
Gute Nacht!

apollon77

@e-i-k-e Welche js-controller Version ist im Einsatz? Laut Log kam das vor als es noch die 2.2.9 war. Dann ab 17:47:49.463 war es der 3.0.8er controller und da gabs das nimmer. oder sehe ich was falsch?

apollon77

@Jan1 Hatten wir oben als Test. Wenn er weiss das die v13 nur kueze Zeit support hat und die nodejs 14 bald kommt und sobald da die erste Minor increase da ist oder so er updaten muss ist ok

apollon77

@Homer-J Yahka 0.11.0 muss auch mit nodejs12 tun!

apollon77

@ilovegym sagte in Beta Test js-controller 3.0.x auf GitHub:

Virtualpowermeter

ble: Ja interessant
virtualpowermeter ist auch interessant. muss beides gefixt werden

Kueppert

Hi @apollon77 ich habe das neuen Rebuild-Kommando mal für Zigbee ausgeführt. Habe folgenden Output erhalten. Gehört das hier her oder zum Adapter?

root@ioBroker2:/opt/iobroker# iobroker stop
root@ioBroker2:/opt/iobroker# iobroker rebuild zigbee
npm rebuild --loglevel error (System call) in "/opt/iobroker/node_modules/iobroker.zigbee"
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../nan/nan.h:54,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/13.12.0/include/node/node.h:618:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/13.12.0/include/node/node.h:652:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
In file included from ../src/serialport.h:6,
                 from ../src/serialport_unix.cpp:2:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:
../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:
../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../src/poller.cpp:1:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^

Ich erkenne aus den Meldungen nur, dass irgendwas nicht funbktioniert hat?
Danke dir und vG, Thorsten

PS: der Vollständigkeit halber auch Befehl Nr. 2:

root@ioBroker2:/opt/iobroker# iobroker rebuild zigbee --install
npm install --loglevel error --production (System call) in "/opt/iobroker/node_modules/iobroker.zigbee"

Rebuild zigbee done

Der sah besser aus

apollon77

@Kueppert Das andere waren auch nur warnungen. Aber mit dem --install scheint es teilweise besser zu tun. Wir hatten schon Fälle wo das eine besser war und manchmal das andere. Die gründe aufzuführen wäre recht technisch Daher haben wir einfach beides gebaut

apollon77

Nach zwei Sentry Crash Reports habe ich hier die 3.0.9 Aka Latest RC2 für Euch auf Github:

3.0.9 (2020-04-15) Release Elena

(Apollon77) fix reported crash on obsolete object deletion (Sentry IOBROKER-JS-CONTROLLER-8)
(Apollon77) fix reported crash when a new process can not be started because of ENOMEM (Sentry IOBROKER-JS-CONTROLLER-7)
(foxriver76) make sure errors are return the same in two places

Kueppert

@apollon77 Update lief problemlos durch - mit folgenden Befehlszeilen (auch für alle, die sich mit dem Verzeichnis schwer tun nochmal zur Erinnerung):

cd /opt/iobroker
iobroker stop
npm install ioBroker/ioBroker.js-controller

(ggf. sudo nutzen, wenn man nicht mit root-Rechten unterwegs ist)

ilovegym

@apollon77 Hi,
die 3.09 wirft recht häufig das hier raus, die Adapter stehen dann auf rot:

host.iobroker 2020-04-15 10:24:00.018 error instance system.adapter.freifunk.0 could not be started: Error: spawn ENOMEM
host.iobroker 2020-04-15 10:23:58.590 error instance system.adapter.enigma2.0 could not be started: Error: spawn ENOMEM

Betrifft auch Socketio, mihome-vacuum Adapter...

Kueppert

@ilovegym hm...ich habe nur den MiHome-Vacuum, der läuft bei mir. Hab nur ein zwei warns gehabt:

mihome-vacuum.0	2020-04-15 10:26:14.963	info	(24740) create state for carpet_mode
mihome-vacuum.0	2020-04-15 10:26:13.437	info	(24740) set nächster Timer: Nicht verfügbar
mihome-vacuum.0	2020-04-15 10:26:13.007	info	(24740) Connected
mihome-vacuum.0	2020-04-15 10:26:12.968	info	(24740) connecting, this can take up to 10 minutes ...
mihome-vacuum.0	2020-04-15 10:26:12.967	warn	(24740) Time difference between Mihome Vacuum and ioBroker: 1 sec
mihome-vacuum.0	2020-04-15 10:26:12.955	info	(24740) New generation or new fw(3.5.4,004004) detected, create new states goto and zoneclean
mihome-vacuum.0	2020-04-15 10:26:12.912	info	(24740) Create state clean_home for controlling by cloud adapter
mihome-vacuum.0	2020-04-15 10:26:12.910	info	(24740) Expert mode disabled, states deleted
mihome-vacuum.0	2020-04-15 10:26:12.860	info	(24740) starting. Version 2.0.9-RC07 in /opt/iobroker/node_modules/iobroker.mihome-vacuum, node: v13.12.0, js-controller: 3.0.9
mihome-vacuum.0	2020-04-15 10:26:12.121	warn	(24740) This object will not be created in future versions. Please report this to the developer.
mihome-vacuum.0	2020-04-15 10:26:12.119	warn	(24740) Object mihome-vacuum.0.info.dnd is invalid: obj.common.type has an invalid value (switch) but has to be one of number, string, boolean, array, object, mixed, file, json

socketio läuft ohne Auffälligkeiten bei mir.

ilovegym

@ilovegym sagte in Beta Test js-controller 3.0.x auf GitHub:

@apollon77 Hi,
die 3.09 wirft recht häufig das hier raus, die Adapter stehen dann auf rot:

host.iobroker 2020-04-15 10:24:00.018 error instance system.adapter.freifunk.0 could not be started: Error: spawn ENOMEM
host.iobroker 2020-04-15 10:23:58.590 error instance system.adapter.enigma2.0 could not be started: Error: spawn ENOMEM

Betrifft auch Socketio, mihome-vacuum Adapter...

Reboot tat gut... danach war ruhe.. bis auf jede Menge warnings vom Socketio.. und web Adapter:

web.0 2020-04-15 10:49:56.703 warn readFile will not read this file (index.html) in future versions: socket.io is not an object of type "meta"
web.0 2020-04-15 10:49:54.612 warn readFile will not read this file (index.html) in future versions: socket.io is not an object of type "meta"
web.0 2020-04-15 10:49:46.704 warn readFile will not read this file (index.html) in future versions: socket.io is not an object of type "meta"
web.0 2020-04-15 10:49:44.372 warn readFile will not read this file (index.html) in future versions: socket.io is not an object of type "meta"

Homer.J.

@apollon77 läuft zwar ich kann aber nichts schalten es reagiert nichts. Bin auch erstmal wieder zurück auf die 10.20.1 Version.
Hab mal auf die 3.0.9 hochgezogen und die node.js 12... Installiert jetzt läuft es warum auch immer.

e-i-k-e

@apollon77
Gut möglich, jetzt läuft die 3.0.8er.
Anbei ein Auszug aus dem log, nachdem ich versucht habe diesen neu zu starten..

Slave:

2020-04-15 11:26:18.431  - [32minfo[39m: host.raspberrypi-display1 stopInstance system.adapter.javascript.2 (force=false, process=true)
2020-04-15 11:26:18.436  - [32minfo[39m: host.raspberrypi-display1 stopInstance system.adapter.javascript.2 send kill signal
2020-04-15 11:26:19.440  - [32minfo[39m: host.raspberrypi-display1 stopInstance system.adapter.javascript.2 killing pid 27154
2020-04-15 11:26:21.611  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 started with pid 7635
2020-04-15 11:26:27.195  - [31merror[39m: javascript.2 (7635) javascript.2 already running
2020-04-15 11:26:27.201  - [33mwarn[39m: javascript.2 (7635) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2020-04-15 11:26:28.455  - [31merror[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2020-04-15 11:26:28.456  - [32minfo[39m: host.raspberrypi-display1 Restart adapter system.adapter.javascript.2 because enabled
2020-04-15 11:26:58.472  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 started with pid 7696
2020-04-15 11:27:02.372  - [32minfo[39m: javascript.2 (27154) Stop script script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
2020-04-15 11:27:03.439  - [31merror[39m: javascript.2 (7696) javascript.2 already running
2020-04-15 11:27:03.446  - [33mwarn[39m: javascript.2 (7696) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2020-04-15 11:27:04.718  - [31merror[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2020-04-15 11:27:04.719  - [32minfo[39m: host.raspberrypi-display1 Restart adapter system.adapter.javascript.2 because enabled
2020-04-15 11:27:34.735  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 started with pid 7769
2020-04-15 11:27:39.805  - [32minfo[39m: javascript.2 (7769) starting. Version 4.4.3 in /opt/iobroker/node_modules/iobroker.javascript, node: v10.20.0, js-controller: 3.0.8
2020-04-15 11:27:40.039  - [32minfo[39m: javascript.2 (7769) requesting all states
2020-04-15 11:27:40.044  - [32minfo[39m: javascript.2 (7769) requesting all objects
2020-04-15 11:27:40.045  - [33mwarn[39m: javascript.2 (7769) adapter.objects.getObjectList is deprecated, and will be removed in the future. Please use adapter.getObjectList/Async. Report this to Developer!
2020-04-15 11:27:43.854  - [32minfo[39m: javascript.2 (7769) received all objects
2020-04-15 11:27:46.488  - [32minfo[39m: javascript.2 (7769) received all states
2020-04-15 11:27:47.519  - [32minfo[39m: javascript.2 (7769) Start javascript script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
2020-04-15 11:27:47.690  - [32minfo[39m: javascript.2 (7769) script.js.Raspberry.Bildschirm_über_BWM_Flur_unten: registered 3 subscriptions and 0 schedules
2020-04-15 11:28:01.522  - [32minfo[39m: javascript.2 (27154) Got terminate signal TERMINATE_YOURSELF
2020-04-15 11:28:01.523  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
2020-04-15 11:28:01.524  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 7635 vs own PID 27154
2020-04-15 11:28:01.525  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
2020-04-15 11:28:01.526  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 7696 vs own PID 27154
2020-04-15 11:29:05.133  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
2020-04-15 11:29:05.135  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 7769 vs own PID 27154
2020-04-15 11:29:05.153  - [32minfo[39m: javascript.2 (27154) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2020-04-15 11:30:07.086  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP)
2020-04-15 11:30:07.088  - [32minfo[39m: host.raspberrypi-display1 Restart adapter system.adapter.javascript.2 because enabled
2020-04-15 11:30:08.121  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 started with pid 8043
2020-04-15 11:30:10.498  - [33mwarn[39m: javascript.2 (7769) Got terminate signal. Checking desired PID: 0 vs own PID 7769
2020-04-15 11:30:10.503  - [32minfo[39m: javascript.2 (7769) Stop script script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
2020-04-15 11:30:10.506  - [33mwarn[39m: javascript.2 (7769) Got terminate signal. Checking desired PID: 8043 vs own PID 7769
2020-04-15 11:30:10.521  - [32minfo[39m: javascript.2 (7769) terminating
2020-04-15 11:30:10.522  - [32minfo[39m: javascript.2 (7769) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2020-04-15 11:30:13.072  - [31merror[39m: javascript.2 (8043) javascript.2 already running
2020-04-15 11:30:13.078  - [33mwarn[39m: javascript.2 (8043) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2020-04-15 11:30:14.213  - [31merror[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2020-04-15 11:30:14.214  - [32minfo[39m: host.raspberrypi-display1 Restart adapter system.adapter.javascript.2 because enabled
2020-04-15 11:30:44.227  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 started with pid 8116
2020-04-15 11:30:49.289  - [32minfo[39m: javascript.2 (8116) starting. Version 4.4.3 in /opt/iobroker/node_modules/iobroker.javascript, node: v10.20.0, js-controller: 3.0.8
2020-04-15 11:30:49.447  - [32minfo[39m: javascript.2 (8116) requesting all states
2020-04-15 11:30:49.451  - [32minfo[39m: javascript.2 (8116) requesting all objects
2020-04-15 11:30:49.453  - [33mwarn[39m: javascript.2 (8116) adapter.objects.getObjectList is deprecated, and will be removed in the future. Please use adapter.getObjectList/Async. Report this to Developer!
2020-04-15 11:30:53.281  - [32minfo[39m: javascript.2 (8116) received all objects
2020-04-15 11:30:55.801  - [32minfo[39m: javascript.2 (8116) received all states
2020-04-15 11:30:56.851  - [32minfo[39m: javascript.2 (8116) Start javascript script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
2020-04-15 11:30:57.000  - [32minfo[39m: javascript.2 (8116) script.js.Raspberry.Bildschirm_über_BWM_Flur_unten: registered 3 subscriptions and 0 schedules
2020-04-15 11:31:04.118  - [31merror[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 terminated by request of the instance itself and will not be restarted, before user restarts it.
2020-04-15 11:31:04.119  - [32minfo[39m: host.raspberrypi-display1 Do not restart adapter system.adapter.javascript.2 because desired by instance

Master:

javascript.2	2020-04-15 11:30:57.000	info	(8116) script.js.Raspberry.Bildschirm_über_BWM_Flur_unten: registered 3 subscriptions and 0 schedules
javascript.2	2020-04-15 11:30:56.851	info	(8116) Start javascript script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
javascript.2	2020-04-15 11:30:55.801	info	(8116) received all states
javascript.2	2020-04-15 11:30:53.281	info	(8116) received all objects
javascript.2	2020-04-15 11:30:49.453	warn	(8116) adapter.objects.getObjectList is deprecated, and will be removed in the future. Please use adapter.getObjectList/Async. Report this to Developer!
javascript.2	2020-04-15 11:30:49.451	info	(8116) requesting all objects
javascript.2	2020-04-15 11:30:49.447	info	(8116) requesting all states
javascript.2	2020-04-15 11:30:49.289	info	(8116) starting. Version 4.4.3 in /opt/iobroker/node_modules/iobroker.javascript, node: v10.20.0, js-controller: 3.0.8
javascript.2	2020-04-15 11:30:13.078	warn	(8043) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
javascript.2	2020-04-15 11:30:13.072	error	(8043) javascript.2 already running
javascript.2	2020-04-15 11:30:10.522	info	(7769) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
javascript.2	2020-04-15 11:30:10.521	info	(7769) terminating
javascript.2	2020-04-15 11:30:10.506	warn	(7769) Got terminate signal. Checking desired PID: 8043 vs own PID 7769
javascript.2	2020-04-15 11:30:10.503	info	(7769) Stop script script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
javascript.2	2020-04-15 11:30:10.498	warn	(7769) Got terminate signal. Checking desired PID: 0 vs own PID 7769
javascript.2	2020-04-15 11:29:05.153	info	(27154) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
javascript.2	2020-04-15 11:29:05.135	warn	(27154) Got terminate signal. Checking desired PID: 7769 vs own PID 27154
javascript.2	2020-04-15 11:29:05.133	warn	(27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
javascript.2	2020-04-15 11:28:01.526	warn	(27154) Got terminate signal. Checking desired PID: 7696 vs own PID 27154
javascript.2	2020-04-15 11:28:01.525	warn	(27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
javascript.2	2020-04-15 11:28:01.524	warn	(27154) Got terminate signal. Checking desired PID: 7635 vs own PID 27154
javascript.2	2020-04-15 11:28:01.523	warn	(27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
javascript.2	2020-04-15 11:28:01.522	info	(27154) Got terminate signal TERMINATE_YOURSELF
javascript.2	2020-04-15 11:27:47.690	info	(7769) script.js.Raspberry.Bildschirm_über_BWM_Flur_unten: registered 3 subscriptions and 0 schedules
javascript.2	2020-04-15 11:27:47.519	info	(7769) Start javascript script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
javascript.2	2020-04-15 11:27:46.488	info	(7769) received all states
javascript.2	2020-04-15 11:27:43.854	info	(7769) received all objects
javascript.2	2020-04-15 11:27:40.045	warn	(7769) adapter.objects.getObjectList is deprecated, and will be removed in the future. Please use adapter.getObjectList/Async. Report this to Developer!
javascript.2	2020-04-15 11:27:40.044	info	(7769) requesting all objects
javascript.2	2020-04-15 11:27:40.039	info	(7769) requesting all states
javascript.2	2020-04-15 11:27:39.805	info	(7769) starting. Version 4.4.3 in /opt/iobroker/node_modules/iobroker.javascript, node: v10.20.0, js-controller: 3.0.8
javascript.2	2020-04-15 11:27:03.446	warn	(7696) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
javascript.2	2020-04-15 11:27:03.439	error	(7696) javascript.2 already running
javascript.2	2020-04-15 11:27:02.372	info	(27154) Stop script script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
javascript.2	2020-04-15 11:26:27.201	warn	(7635) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
javascript.2	2020-04-15 11:26:27.195	error	(7635) javascript.2 already running

e-i-k-e

@apollon77 said in Beta Test js-controller 3.0.x auf GitHub:

@e-i-k-e Welche js-controller Version ist im Einsatz? Laut Log kam das vor als es noch die 2.2.9 war. Dann ab 17:47:49.463 war es der 3.0.8er controller und da gabs das nimmer. oder sehe ich was falsch?

@apollon77
Gut möglich, jetzt läuft die 3.0.8er.
Anbei ein Auszug aus dem log, nachdem ich versucht habe diesen neu zu starten..

Slave:

2020-04-15 11:26:18.431  - [32minfo[39m: host.raspberrypi-display1 stopInstance system.adapter.javascript.2 (force=false, process=true)
2020-04-15 11:26:18.436  - [32minfo[39m: host.raspberrypi-display1 stopInstance system.adapter.javascript.2 send kill signal
2020-04-15 11:26:19.440  - [32minfo[39m: host.raspberrypi-display1 stopInstance system.adapter.javascript.2 killing pid 27154
2020-04-15 11:26:21.611  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 started with pid 7635
2020-04-15 11:26:27.195  - [31merror[39m: javascript.2 (7635) javascript.2 already running
2020-04-15 11:26:27.201  - [33mwarn[39m: javascript.2 (7635) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2020-04-15 11:26:28.455  - [31merror[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2020-04-15 11:26:28.456  - [32minfo[39m: host.raspberrypi-display1 Restart adapter system.adapter.javascript.2 because enabled
2020-04-15 11:26:58.472  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 started with pid 7696
2020-04-15 11:27:02.372  - [32minfo[39m: javascript.2 (27154) Stop script script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
2020-04-15 11:27:03.439  - [31merror[39m: javascript.2 (7696) javascript.2 already running
2020-04-15 11:27:03.446  - [33mwarn[39m: javascript.2 (7696) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2020-04-15 11:27:04.718  - [31merror[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2020-04-15 11:27:04.719  - [32minfo[39m: host.raspberrypi-display1 Restart adapter system.adapter.javascript.2 because enabled
2020-04-15 11:27:34.735  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 started with pid 7769
2020-04-15 11:27:39.805  - [32minfo[39m: javascript.2 (7769) starting. Version 4.4.3 in /opt/iobroker/node_modules/iobroker.javascript, node: v10.20.0, js-controller: 3.0.8
2020-04-15 11:27:40.039  - [32minfo[39m: javascript.2 (7769) requesting all states
2020-04-15 11:27:40.044  - [32minfo[39m: javascript.2 (7769) requesting all objects
2020-04-15 11:27:40.045  - [33mwarn[39m: javascript.2 (7769) adapter.objects.getObjectList is deprecated, and will be removed in the future. Please use adapter.getObjectList/Async. Report this to Developer!
2020-04-15 11:27:43.854  - [32minfo[39m: javascript.2 (7769) received all objects
2020-04-15 11:27:46.488  - [32minfo[39m: javascript.2 (7769) received all states
2020-04-15 11:27:47.519  - [32minfo[39m: javascript.2 (7769) Start javascript script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
2020-04-15 11:27:47.690  - [32minfo[39m: javascript.2 (7769) script.js.Raspberry.Bildschirm_über_BWM_Flur_unten: registered 3 subscriptions and 0 schedules
2020-04-15 11:28:01.522  - [32minfo[39m: javascript.2 (27154) Got terminate signal TERMINATE_YOURSELF
2020-04-15 11:28:01.523  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
2020-04-15 11:28:01.524  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 7635 vs own PID 27154
2020-04-15 11:28:01.525  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
2020-04-15 11:28:01.526  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 7696 vs own PID 27154
2020-04-15 11:29:05.133  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
2020-04-15 11:29:05.135  - [33mwarn[39m: javascript.2 (27154) Got terminate signal. Checking desired PID: 7769 vs own PID 27154
2020-04-15 11:29:05.153  - [32minfo[39m: javascript.2 (27154) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2020-04-15 11:30:07.086  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP)
2020-04-15 11:30:07.088  - [32minfo[39m: host.raspberrypi-display1 Restart adapter system.adapter.javascript.2 because enabled
2020-04-15 11:30:08.121  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 started with pid 8043
2020-04-15 11:30:10.498  - [33mwarn[39m: javascript.2 (7769) Got terminate signal. Checking desired PID: 0 vs own PID 7769
2020-04-15 11:30:10.503  - [32minfo[39m: javascript.2 (7769) Stop script script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
2020-04-15 11:30:10.506  - [33mwarn[39m: javascript.2 (7769) Got terminate signal. Checking desired PID: 8043 vs own PID 7769
2020-04-15 11:30:10.521  - [32minfo[39m: javascript.2 (7769) terminating
2020-04-15 11:30:10.522  - [32minfo[39m: javascript.2 (7769) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2020-04-15 11:30:13.072  - [31merror[39m: javascript.2 (8043) javascript.2 already running
2020-04-15 11:30:13.078  - [33mwarn[39m: javascript.2 (8043) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2020-04-15 11:30:14.213  - [31merror[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2020-04-15 11:30:14.214  - [32minfo[39m: host.raspberrypi-display1 Restart adapter system.adapter.javascript.2 because enabled
2020-04-15 11:30:44.227  - [32minfo[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 started with pid 8116
2020-04-15 11:30:49.289  - [32minfo[39m: javascript.2 (8116) starting. Version 4.4.3 in /opt/iobroker/node_modules/iobroker.javascript, node: v10.20.0, js-controller: 3.0.8
2020-04-15 11:30:49.447  - [32minfo[39m: javascript.2 (8116) requesting all states
2020-04-15 11:30:49.451  - [32minfo[39m: javascript.2 (8116) requesting all objects
2020-04-15 11:30:49.453  - [33mwarn[39m: javascript.2 (8116) adapter.objects.getObjectList is deprecated, and will be removed in the future. Please use adapter.getObjectList/Async. Report this to Developer!
2020-04-15 11:30:53.281  - [32minfo[39m: javascript.2 (8116) received all objects
2020-04-15 11:30:55.801  - [32minfo[39m: javascript.2 (8116) received all states
2020-04-15 11:30:56.851  - [32minfo[39m: javascript.2 (8116) Start javascript script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
2020-04-15 11:30:57.000  - [32minfo[39m: javascript.2 (8116) script.js.Raspberry.Bildschirm_über_BWM_Flur_unten: registered 3 subscriptions and 0 schedules
2020-04-15 11:31:04.118  - [31merror[39m: host.raspberrypi-display1 instance system.adapter.javascript.2 terminated by request of the instance itself and will not be restarted, before user restarts it.
2020-04-15 11:31:04.119  - [32minfo[39m: host.raspberrypi-display1 Do not restart adapter system.adapter.javascript.2 because desired by instance

Master:

javascript.2	2020-04-15 11:30:57.000	info	(8116) script.js.Raspberry.Bildschirm_über_BWM_Flur_unten: registered 3 subscriptions and 0 schedules
javascript.2	2020-04-15 11:30:56.851	info	(8116) Start javascript script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
javascript.2	2020-04-15 11:30:55.801	info	(8116) received all states
javascript.2	2020-04-15 11:30:53.281	info	(8116) received all objects
javascript.2	2020-04-15 11:30:49.453	warn	(8116) adapter.objects.getObjectList is deprecated, and will be removed in the future. Please use adapter.getObjectList/Async. Report this to Developer!
javascript.2	2020-04-15 11:30:49.451	info	(8116) requesting all objects
javascript.2	2020-04-15 11:30:49.447	info	(8116) requesting all states
javascript.2	2020-04-15 11:30:49.289	info	(8116) starting. Version 4.4.3 in /opt/iobroker/node_modules/iobroker.javascript, node: v10.20.0, js-controller: 3.0.8
javascript.2	2020-04-15 11:30:13.078	warn	(8043) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
javascript.2	2020-04-15 11:30:13.072	error	(8043) javascript.2 already running
javascript.2	2020-04-15 11:30:10.522	info	(7769) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
javascript.2	2020-04-15 11:30:10.521	info	(7769) terminating
javascript.2	2020-04-15 11:30:10.506	warn	(7769) Got terminate signal. Checking desired PID: 8043 vs own PID 7769
javascript.2	2020-04-15 11:30:10.503	info	(7769) Stop script script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
javascript.2	2020-04-15 11:30:10.498	warn	(7769) Got terminate signal. Checking desired PID: 0 vs own PID 7769
javascript.2	2020-04-15 11:29:05.153	info	(27154) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
javascript.2	2020-04-15 11:29:05.135	warn	(27154) Got terminate signal. Checking desired PID: 7769 vs own PID 27154
javascript.2	2020-04-15 11:29:05.133	warn	(27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
javascript.2	2020-04-15 11:28:01.526	warn	(27154) Got terminate signal. Checking desired PID: 7696 vs own PID 27154
javascript.2	2020-04-15 11:28:01.525	warn	(27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
javascript.2	2020-04-15 11:28:01.524	warn	(27154) Got terminate signal. Checking desired PID: 7635 vs own PID 27154
javascript.2	2020-04-15 11:28:01.523	warn	(27154) Got terminate signal. Checking desired PID: 0 vs own PID 27154
javascript.2	2020-04-15 11:28:01.522	info	(27154) Got terminate signal TERMINATE_YOURSELF
javascript.2	2020-04-15 11:27:47.690	info	(7769) script.js.Raspberry.Bildschirm_über_BWM_Flur_unten: registered 3 subscriptions and 0 schedules
javascript.2	2020-04-15 11:27:47.519	info	(7769) Start javascript script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
javascript.2	2020-04-15 11:27:46.488	info	(7769) received all states
javascript.2	2020-04-15 11:27:43.854	info	(7769) received all objects
javascript.2	2020-04-15 11:27:40.045	warn	(7769) adapter.objects.getObjectList is deprecated, and will be removed in the future. Please use adapter.getObjectList/Async. Report this to Developer!
javascript.2	2020-04-15 11:27:40.044	info	(7769) requesting all objects
javascript.2	2020-04-15 11:27:40.039	info	(7769) requesting all states
javascript.2	2020-04-15 11:27:39.805	info	(7769) starting. Version 4.4.3 in /opt/iobroker/node_modules/iobroker.javascript, node: v10.20.0, js-controller: 3.0.8
javascript.2	2020-04-15 11:27:03.446	warn	(7696) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
javascript.2	2020-04-15 11:27:03.439	error	(7696) javascript.2 already running
javascript.2	2020-04-15 11:27:02.372	info	(27154) Stop script script.js.Raspberry.Bildschirm_über_BWM_Flur_unten
javascript.2	2020-04-15 11:26:27.201	warn	(7635) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
javascript.2	2020-04-15 11:26:27.195	error	(7635) javascript.2 already running

NEWS

Beta Test js-controller 3.0.x auf GitHub

Support us

1.2k
Online

30.5k
Users

76.8k
Topics

1.2m
Posts

NEWS

Beta Test js-controller 3.0.x auf GitHub

Support us

1.2kOnline

30.5kUsers

76.8kTopics

1.2mPosts

1.2k
Online

30.5k
Users

76.8k
Topics

1.2m
Posts