Installation ioBroker auf Cubietruck

Homoran

Hallo Bluefox,

heute reißen die schlechten nachrichten nicht ab

Gruß

Rainer

PS habt ihr gefunden, warum bei mir im dashui keine Geräte in der Auswahl angezeigt werden? http://forum.iobroker.org/viewtopic.php?f=8&t=236#p1204

DAS IST NUR EINE FRAGE!!

Bluefox

~~@Homoran:~~

Hallo Bluefox,

heute reißen die schlechten nachrichten nicht ab
filename="ioBroker_hm_error.jpg" index="0">~~

Gruß

Rainer

PS habt ihr gefunden, warum bei mir im dashui keine Geräte in der Auswahl angezeigt werden? http://forum.iobroker.org/viewtopic.php?f=8&t=236#p1204

DAS IST NUR EINE FRAGE!! `
Ich arbeite gerade an backup/restore Lösung. Wenn ich fertig bin, will ich von dir eine Backup, damit ich die Objekte anschauen kann und den Fehler reproduzieren.

Homoran

~~@Bluefox:~~

Ich arbeite gerade an backup/restore Lösung. `

SUPER!!!

wollte ich schon vorschlagen, aber ich dachte das wäre noch zu früh.

Danke

Rainer

Homoran

Ich fürchte, da ist noch ein BUG!

Ich hatte gedacht, ich hätte die verlorenen Datenpunkte gefunden (hab ich auch! Aber dann läuft iobroker nicht mehr!)

Ich hatte wegen Probleme den hm-rpc Adapter mit der Adresse 0.0.0.0 versehen.

Habe diese auf meine Cubox-Adresse geändert…

...und schon wurden die Datenpunkte eingelesen

... und schon konnte ich auf die WebUI nicht mehr zugreifen????

log mit putty angesehen -````
2014-11-07 22:07:14.657 - error: controller instance system.adapter.hm-rega.0 terminated with code 7

Der Adapter startet immer wieder neu und beendet sich ebenso immer wieder :(

Also über futon die Adresse wieder auf 0.0.0.0 gestellt und schon bleibt der admin-Adapter sttabil, aber was ist jetzt?

Ich habe zweimal den js-controller unter hosts!

Was kann ich machen?

Rainer

PS ich kann nicht ausschließen, dass das auch meine lxCCU abgeschossen hat.

Trident

Hallo zusammen,

nach längerer Pause hatte ich wieder mal Zeit ein bisschen mit ioBroker zu experimentieren.

Es hat sich ja einiges getan! Wahnsinn, dass es nun schon mit den Updates und scheinbar auch der Log-Anzeige klappt! Ich habe gleich den Ping-Adapter getestet. Mit einem Erfolg für die Log_Anzeige (Fehler wurde angezeigt) und einem klaren Misserfolg für den Ping-Adapter

Hier der Eintrag aus dem Log:
` > Drucke Strg+A und danach Strg+C um inhalt in den Zwischenpufer zu kopiere. Klicke irgendwo um das Fenster zu machen.

ping.0 2014-11-09 20:18:59 error uncaught exception: Cannot call method 'replace' of undefined

ping.0 2014-11-09 20:18:59 error TypeError: Cannot call method 'replace' of undefined at /opt/iobroker/adapter/ping/main.js:191:47 at /opt/iobroker/lib/adapter.js:1092:33 at /opt/iobroker/lib/couch.js:157:13 at Request._callback (/opt/iobroker/node_modules/nano/nano.js:303:11) at Request.self.callback (/opt/iobroker/node_modules/nano/node_modules/request/request.js:122:22) at Request.EventEmitter.emit (events.js:98:17) at Request. (/opt/iobroker/node_modules/nano/node_modules/request/request.js:888:14) at Request.EventEmitter.emit (events.js:117:20) at IncomingMessage. (/opt/iobroker/node_modules/nano/node_modules/request/request.js:839:12) at IncomingMessage.EventEmitter.emit (events.js:117:20)

ping.0 2014-11-09 20:18:59 error uncaught exception: Cannot call method 'replace' of undefined

ping.0 2014-11-09 20:18:59 error TypeError: Cannot call method 'replace' of undefined at /opt/iobroker/adapter/ping/main.js:191:47 at /opt/iobroker/lib/adapter.js:1092:33 at /opt/iobroker/lib/couch.js:157:13 at Request._callback (/opt/iobroker/node_modules/nano/nano.js:303:11) at Request.self.callback (/opt/iobroker/node_modules/nano/node_modules/request/request.js:122:22) at Request.EventEmitter.emit (events.js:98:17) at Request. (/opt/iobroker/node_modules/nano/node_modules/request/request.js:888:14) at Request.EventEmitter.emit (events.js:117:20) at IncomingMessage. (/opt/iobroker/node_modules/nano/node_modules/request/request.js:839:12) at IncomingMessage.EventEmitter.emit (events.js:117:20)

ping.0 2014-11-09 20:18:53 info ping.0 terminating

ping.0 2014-11-09 20:18:59 info ping.0 starting. Version 0.0.4

ping.0 2014-11-09 20:17:53 info ping.0 starting. Version 0.0.4

admin.0 2014-11-09 20:16:41 info admin.0 getCouchLog history.io.system.host.cubie.load.20141108

admin.0 2014-11-09 20:16:41 info admin.0 getCouchLog history.io.system.host.cubie.load.20141108

admin.0 2014-11-09 20:16:41 info admin.0 getCouchLog history.io.system.host.cubie.load.20141109

admin.0 2014-11-09 20:16:41 info admin.0 getCouchLog history.io.system.host.cubie.load.20141109 `

Macht echt Spaß die Entwicklung mitzubekommen! Danke nochmal an HQ und Bluefox!

Viele Grüße

Trident

Homoran

Habe heute zum ersten mal auch die Loganzeige sehen können - aber nur kurz. Auf einmal drehte(!) sich wieder das Zahnrad und nichts passierte.

beim refresh mit F5 kam ein ERROR_CONNECTION_REFUSED

Ich habe alles asuprobiert, unter futon auch mal den Port geändert - ohne Erfolg.

Dashui lief auf :8088 und dort kam ich jetzt sogar sn die Datenpunkte der Geräte ran.

Der log auf der CuBox brachte nichts spannendes:

2014-11-10 17:29:02.463  - info: hm-rega.0 State alarms 0
2014-11-10 17:29:02.465  - info: hm-rega.0 State maintenance 6
2014-11-10 17:29:32.544  - info: hm-rega.0 State alarms 0
2014-11-10 17:29:32.546  - info: hm-rega.0 State maintenance 6
2014-11-10 17:30:00.700  - info: controller instance system.adapter.dwd.0 started with pid 13329
2014-11-10 17:30:02.494  - info: hm-rega.0 State alarms 0
2014-11-10 17:30:02.497  - info: hm-rega.0 State maintenance 6
2014-11-10 17:30:02.970  - info: dwd.0 starting. Version 0.1.0
2014-11-10 17:30:03.556  - info: dwd.0 setting states
2014-11-10 17:30:08.579  - info: controller instance system.adapter.dwd.0 terminated with code 0
2014-11-10 17:30:32.535  - info: hm-rega.0 State alarms 0
2014-11-10 17:30:32.538  - info: hm-rega.0 State maintenance 6
2014-11-10 17:31:02.559  - info: hm-rega.0 State alarms 0
2014-11-10 17:31:02.562  - info: hm-rega.0 State maintenance 6

Anscheinend läuft alles.

Habe dann (ohne zu wissen was ich mache) nach Befragen von Tante google mal netstat -tulpen auf der CuBox gestartet:

root@cubox-i:/opt/iobroker# netstat -tulpen
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode       PID/Program name
tcp        0      0 127.0.0.1:6379          0.0.0.0:*               LISTEN      104        4302        2483/redis-server
tcp        0      0 0.0.0.0:2000            0.0.0.0:*               LISTEN      0          5740        2790/io.hm-rpc.0
tcp        0      0 0.0.0.0:8080            0.0.0.0:*               LISTEN      1000       687         2269/ccu.io
tcp        0      0 0.0.0.0:2101            0.0.0.0:*               LISTEN      1000       713         2269/ccu.io
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          680         2661/sshd
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      0          8170        2812/node-red
tcp        0      0 0.0.0.0:8088            0.0.0.0:*               LISTEN      0          5873        2798/io.legacy.0
tcp        0      0 0.0.0.0:5984            0.0.0.0:*               LISTEN      105        5490        2224/beam.smp
tcp6       0      0 :::22                   :::*                    LISTEN      0          682         2661/sshd
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          4148        1670/dhclient
udp        0      0 192.168.xxx.yyy:123       0.0.0.0:*                           0          4319        2491/ntpd
udp        0      0 127.0.0.1:123           0.0.0.0:*                           0          4318        2491/ntpd
udp        0      0 0.0.0.0:123             0.0.0.0:*                           0          1716        2491/ntpd
udp        0      0 0.0.0.0:26940           0.0.0.0:*                           0          4129        1670/dhclient
udp6       0      0 :::49116                :::*                                0          4130        1670/dhclient
udp6       0      0 fe80::d263:b4ff:fe0:123 :::*                                0          4321        2491/ntpd
udp6       0      0 ::1:123                 :::*                                0          4320        2491/ntpd
udp6       0      0 :::123                  :::*                                0          1717        2491/ntpd

Wenn ich das richtig interpretiere lauscht der nicht mehr auf :8081

(:8080 ist ccu.io)

ein apt-get update && apt-get upgrade brachte nichts.

Ein aktuelles ioBroker update ist nicht da.

Soll ich den mal platt machen??

Wäre kein Problem, dann kann ich auch das Manual nochmal live überprüfen.

Gruß

Rainer

Homoran

jetzt habe ich auch mal den cubie mit ./iobroker update

root@cubie:/opt/iobroker# ./iobroker update
Cannot get version of "virtual".
Cannot get version of "geofency".
update done
Adapter    "zwave"         : 0.0.8
Adapter    "yr"            : 0.0.4
Adapter    "websocket"     : 0.0.1
Adapter    "web"           : 0.0.2
Adapter    "virtual"
Adapter    "sonos"         : 0.0.3
Adapter    "rickshaw"      : 0.0.0
Adapter    "pushover"      : 0.0.3
Adapter    "onkyo"         : 0.0.4
Adapter    "telnet"        : 0.0.0
Adapter    "socketio"      : 0.0.1
Adapter    "mqtt"          : 0.1.0
Adapter    "mobile"        : 0.0.2
Adapter    "legacy"        : 0.1.8    , installed 0.1.8
Adapter    "knx"           : 0.0.1
Controller "js-controller" : 0.0.35   , installed 0.0.31 [Updateable]
Adapter    "javascript"    : 0.1.1
Adapter    "hue"           : 0.1.4
Adapter    "hm-rpc"        : 0.2.5    , installed 0.2.5
Adapter    "hm-rega"       : 0.1.8    , installed 0.1.8
Adapter    "history"       : 0.0.7
Adapter    "highcharts"    : 0.0.0
Adapter    "graphite"      : 0.1.0
Adapter    "geofency"
Adapter    "example"       : 0.1.1    , installed 0.1.1
Adapter    "email"         : 0.0.3
Adapter    "dwd"           : 0.1.0    , installed 0.1.0
Adapter    "cul"           : 0.0.2
Adapter    "b-control-em"  : 0.0.3
Adapter    "artnet"        : 0.0.3
Adapter    "admin"         : 0.1.7    , installed 0.1.4 [Updateable]

````und ./iobroker upgrade auf den neusetn Stand bringen wollen.

Immerhin komme ich da noch auf die WebUI - Die Datenpunkte der Geräte sind NICHT da.

und der errorlog sah so aus:

npm http GET https://registry.npmjs.org/block-stream/-/block-stream-0.0.7.tgz
npm WARN optional dep failed, continuing node-windows@0.1.7
npm http 200 https://registry.npmjs.org/block-stream/-/block-stream-0.0.7.tgz
npm ERR! Error: ENOTEMPTY, rmdir '/opt/iobroker/node_modules/tar.gz/node_modules'
npm ERR! If you need help, you may report this log at:
npm ERR! <http: github.com/isaacs/npm/issues="">npm ERR! or email it to:
npm ERR! npm-@googlegroups.comnpm ERR! System Linux 3.4.104-sunxi
npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "install" "/opt/iobroker" "--production" "--prefix" "/opt/iobroker"
npm ERR! cwd /opt/iobroker
npm ERR! node -v v0.10.22
npm ERR! npm -v 1.3.14
npm ERR! path /opt/iobroker/node_modules/tar.gz/node_modules
npm ERR! code ENOTEMPTY
npm ERR! errno 53
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /opt/iobroker/npm-debug.log
npm ERR! not ok code 0
Host "cubie" updated
npm http GET https://registry.npmjs.org/minimist/0.0.8
npm http 200 https://registry.npmjs.org/minimist/0.0.8
npm http GET https://registry.npmjs.org/minimist/-/minimist-0.0.8.tgz
npm http 200 https://registry.npmjs.org/minimist/-/minimist-0.0.8.tgz
npm ERR! Error: ENOENT, chmod '/opt/iobroker/node_modules/tar.gz/bin/targz'
npm ERR! If you need help, you may report this log at:
npm ERR! <http: github.com/isaacs/npm/issues="">npm ERR! or email it to:
npm ERR! npm-@googlegroups.comnpm ERR! System Linux 3.4.104-sunxi
npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "install" "/opt/iobroker" "--production" "--prefix" "/opt/iobroker"
npm ERR! cwd /opt/iobroker
npm ERR! node -v v0.10.22
npm ERR! npm -v 1.3.14
npm ERR! path /opt/iobroker/node_modules/tar.gz/bin/targz
npm ERR! code ENOENT
npm ERR! errno 34
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /opt/iobroker/npm-debug.log
npm ERR! not ok code 0
Host "cubie" updated/npm-@googlegroups.com</http:>/npm-@googlegroups.com</http:>


:(

Gruß

Rainer

Bluefox

~~@Homoran:~~

jetzt habe ich auch mal den cubie mit ./iobroker update

Gruß

Rainer `
Kannst du folgendes ausführen:

cd /opt/iobroker/node_modules/
sudo rm -R *
cd ..
npm install --production

Dann sollte das Problem behoben sein.

Homoran

Leider nein,

erst kam ein Fehler:

root@cubie:/opt/iobroker# npm install --production
npm http GET https://registry.npmjs.org/node.extend
npm http GET https://registry.npmjs.org/redis
npm http GET https://registry.npmjs.org/hiredis
npm http GET https://registry.npmjs.org/request
npm http GET https://registry.npmjs.org/winston
npm http GET https://registry.npmjs.org/yargs
npm http GET https://registry.npmjs.org/mime
npm http GET https://registry.npmjs.org/tar.gz
npm http GET https://registry.npmjs.org/node-windows
npm http GET https://registry.npmjs.org/adm-zip
npm http GET https://registry.npmjs.org/daemonize2
npm http GET https://registry.npmjs.org/ncp
npm http GET https://registry.npmjs.org/nano
npm http GET https://github.com/hobbyquaker/node-schedule/tarball/master
npm http 304 https://registry.npmjs.org/node.extend
npm http 304 https://registry.npmjs.org/yargs
npm http 304 https://registry.npmjs.org/hiredis
npm http 304 https://registry.npmjs.org/mime
npm http 304 https://registry.npmjs.org/tar.gz
npm http 304 https://registry.npmjs.org/adm-zip
npm http 200 https://registry.npmjs.org/winston
npm http 200 https://registry.npmjs.org/redis
npm http 200 https://registry.npmjs.org/request
npm http 503 https://registry.npmjs.org/daemonize2
[b][color]npm ERR! registry error parsing json[/color][/b]
npm http 304 https://registry.npmjs.org/ncp
npm http 200 https://github.com/hobbyquaker/node-schedule/tarball/master
npm http 304 https://registry.npmjs.org/node-windows
npm http 200 https://registry.npmjs.org/nano
npm http GET https://registry.npmjs.org/daemonize2
npm http 304 https://registry.npmjs.org/daemonize2
npm WARN optional dep failed, continuing node-windows@0.1.7
npm http GET https://registry.npmjs.org/is
npm http 304 https://registry.npmjs.org/is
npm http GET https://registry.npmjs.org/fstream
npm http GET https://registry.npmjs.org/tar
npm http GET https://registry.npmjs.org/commander
npm http 304 https://registry.npmjs.org/fstream
npm http 304 https://registry.npmjs.org/tar
npm http 304 https://registry.npmjs.org/commander
npm http GET https://registry.npmjs.org/keypress
npm http 304 https://registry.npmjs.org/keypress
npm http GET https://registry.npmjs.org/node-uuid
npm http GET https://registry.npmjs.org/aws-sign2
npm http GET https://registry.npmjs.org/stringstream
npm http GET https://registry.npmjs.org/tough-cookie
npm http GET https://registry.npmjs.org/form-data
npm http GET https://registry.npmjs.org/tunnel-agent
npm http GET https://registry.npmjs.org/http-signature
npm http GET https://registry.npmjs.org/oauth-sign
npm http GET https://registry.npmjs.org/hawk/1.1.1
npm http GET https://registry.npmjs.org/qs
npm http GET https://registry.npmjs.org/json-stringify-safe
npm http GET https://registry.npmjs.org/mime-types
npm http GET https://registry.npmjs.org/forever-agent
npm http GET https://registry.npmjs.org/minimist
npm http 304 https://registry.npmjs.org/aws-sign2
npm http 304 https://registry.npmjs.org/stringstream
npm http 304 https://registry.npmjs.org/tough-cookie
npm http 304 https://registry.npmjs.org/tunnel-agent
npm http 304 https://registry.npmjs.org/oauth-sign
npm http 200 https://registry.npmjs.org/node-uuid
npm http 304 https://registry.npmjs.org/hawk/1.1.1
npm http 200 https://registry.npmjs.org/form-data
npm http 304 https://registry.npmjs.org/qs
npm http 304 https://registry.npmjs.org/http-signature
npm http 304 https://registry.npmjs.org/json-stringify-safe
npm http 200 https://registry.npmjs.org/mime-types
npm http 304 https://registry.npmjs.org/forever-agent
npm http GET https://registry.npmjs.org/graceful-fs
npm http GET https://registry.npmjs.org/inherits
npm http GET https://registry.npmjs.org/mkdirp
npm http GET https://registry.npmjs.org/rimraf
npm http 200 https://registry.npmjs.org/minimist
npm http 304 https://registry.npmjs.org/inherits
npm http 304 https://registry.npmjs.org/mkdirp
npm http 304 https://registry.npmjs.org/graceful-fs
npm http 304 https://registry.npmjs.org/rimraf
npm http GET https://registry.npmjs.org/combined-stream
npm http GET https://registry.npmjs.org/async
npm http GET https://registry.npmjs.org/nan
npm http GET https://registry.npmjs.org/bindings
npm http 304 https://registry.npmjs.org/combined-stream
npm http 200 https://registry.npmjs.org/async
npm http 200 https://registry.npmjs.org/nan
npm http 304 https://registry.npmjs.org/bindings
npm http GET https://registry.npmjs.org/block-stream
npm http 304 https://registry.npmjs.org/block-stream
npm http GET https://registry.npmjs.org/assert-plus/0.1.2
npm http GET https://registry.npmjs.org/asn1/0.1.11
npm http GET https://registry.npmjs.org/ctype/0.5.2
npm http 304 https://registry.npmjs.org/asn1/0.1.11
npm http

Dann blieb er hängen.

sonst mach ich den auch noch platt - aber nicht mehr heute

Gruß

Rainer

Bluefox

An alle, die jetzt neuen "admin" Adapter installiert haben, bevor js-controller upgedatet wurde;

bitte in der Konsole:

cd /opt/iobroker
node iobroker.js upgrade self

ausführen.

Homoran

…und danach wieder

chmod +x iobroker

:mrgreen:

und

reboot

und ./iobroker start

Das log in der Webui sah dann so aus:

admin.0	2014-11-10 22:46:09	info	admin.0 received all objects
cubie	2014-11-10 22:46:08	error	Invalid request getInstalled. "callback" or "from" is null
cubie	2014-11-10 22:46:08	error	Invalid request getRepository. "callback" or "from" is null
admin.0	2014-11-10 22:46:09	info	admin.0 received all objects
admin.0	2014-11-10 22:46:07	info	admin.0 received all states

Alle io-Datenpunkte der Geräte sind da - aber nicht in der Auswahlbox von dashui

Ich mach den dann auch nochmal platt

Gute Nacht

Rainer

Bluefox

~~@Homoran:~~

…und danach wieder
chmod +x iobroker 
:mrgreen:

und

reboot

und ./iobroker start

Das log in der Webui sah dann so aus:
admin.0	2014-11-10 22:46:09	info	admin.0 received all objects
cubie	2014-11-10 22:46:08	error	Invalid request getInstalled. "callback" or "from" is null
cubie	2014-11-10 22:46:08	error	Invalid request getRepository. "callback" or "from" is null
admin.0	2014-11-10 22:46:09	info	admin.0 received all objects
admin.0	2014-11-10 22:46:07	info	admin.0 received all states
Alle io-Datenpunkte der Geräte sind da - aber nicht in der Auswahlbox von dashui

Ich mach den dann auch nochmal platt

Gute Nacht

Rainer Kannst du > node iobroker.js backup `
ausführen? Und dann mir die Datei aus /opt/iobroker/backups schicken? dogafox at gmail.com

Homoran

Gut dass ich den noch nicht platt gemacht habe

Backup ist unterwegs

Gruß

Rainer

Homoran

Ich hatte gesehen, dass die Daten nicht mehr refreshed wurden und daraufhin ./ioBroker stop und wieder ./ioBroker start gemacht.

in dem darauf folgenden log versteckte sich:

2014-11-13 19:18:57.537  - [31merror[39m: TypeError: Cannot read property 'UNIT' of undefined
    at /opt/iobroker/adapter/hm-rpc/hm-rpc.js:144:74
    at /opt/iobroker/lib/couch.js:91:13
    at Request._callback (/opt/iobroker/node_modules/nano/nano.js:303:11)
    at Request.self.callback (/opt/iobroker/node_modules/nano/node_modules/request/request.js:122:22)
    at Request.EventEmitter.emit (events.js:98:17)
    at Request. <anonymous>(/opt/iobroker/node_modules/nano/node_modules/request/request.js:888:14)
    at Request.EventEmitter.emit (events.js:117:20)
    at IncomingMessage. <anonymous>(/opt/iobroker/node_modules/nano/node_modules/request/request.js:839:12)
    at IncomingMessage.EventEmitter.emit (events.js:117:20)
    at _stream_readable.js:920:16</anonymous></anonymous>

Gruß

Rainer

Homoran

Ich hatte gehofft, dass ihr in einem wohlverdienten Urlaub seid, weil es so ruhig wurde.

Doch jetzt kam wieder ein Update, leider ist der Fehler:

2014-11-16 10:45:27.153  - error: uncaught exception: Cannot read property 'UNIT' of undefined
2014-11-16 10:45:27.171  - error: TypeError: Cannot read property 'UNIT' of undefined
    at /opt/iobroker/adapter/hm-rpc/hm-rpc.js:144:74
    at /opt/iobroker/lib/couch.js:91:13
    at Request._callback (/opt/iobroker/node_modules/nano/nano.js:303:11)
    at Request.self.callback (/opt/iobroker/node_modules/nano/node_modules/request/request.js:122:22)
    at Request.EventEmitter.emit (events.js:98:17)
    at Request. <anonymous>(/opt/iobroker/node_modules/nano/node_modules/request/request.js:888:14)
    at Request.EventEmitter.emit (events.js:117:20)
    at IncomingMessage. <anonymous>(/opt/iobroker/node_modules/nano/node_modules/request/request.js:839:12)
    at IncomingMessage.EventEmitter.emit (events.js:117:20)
    at _stream_readable.js:920:16
2014-11-16 10:45:27.292  - info: hm-rpc.0 xmlrpc server listening on 0.0.0.0:2000
2014-11-16 10:45:27.293  - info: hm-rpc.0 xmlrpc -> 192.168.xxx.yyy:2001 init ["http://0.0.0.0:2000","hm-rpc.0"]
2014-11-16 10:45:27.486  - error: controller instance system.adapter.hm-rpc.0 terminated with code 6
2014-11-16 10:45:27.487  - info: Restart adapter system.adapter.hm-rpc.0 because enabled
2014-11-16 10:45:56.286  - info: hm-rega.0 State alarms 0
2014-11-16 10:45:56.289  - info: hm-rega.0 State maintenance 4
2014-11-16 10:45:57.518  - info: controller instance system.adapter.hm-rpc.0 started with pid 1728
2014-11-16 10:45:59.654  - info: hm-rpc.0 starting. Version 0.2.5
2014-11-16 10:45:59.726  - error: uncaught exception: Cannot read property 'UNIT' of undefined
2014-11-16 10:45:59.743  - error: TypeError: Cannot read property 'UNIT' of undefined
    at /opt/iobroker/adapter/hm-rpc/hm-rpc.js:144:74
    at /opt/iobroker/lib/couch.js:91:13
    at Request._callback (/opt/iobroker/node_modules/nano/nano.js:303:11)
    at Request.self.callback (/opt/iobroker/node_modules/nano/node_modules/request/request.js:122:22)
    at Request.EventEmitter.emit (events.js:98:17)
    at Request. <anonymous>(/opt/iobroker/node_modules/nano/node_modules/request/request.js:888:14)
    at Request.EventEmitter.emit (events.js:117:20)
    at IncomingMessage. <anonymous>(/opt/iobroker/node_modules/nano/node_modules/request/request.js:839:12)
    at IncomingMessage.EventEmitter.emit (events.js:117:20)
    at _stream_readable.js:920:16
2014-11-16 10:45:59.902  - info: hm-rpc.0 xmlrpc server listening on 0.0.0.0:2000
2014-11-16 10:45:59.903  - info: hm-rpc.0 xmlrpc -> 192.168.xxx.yyy:2001 init ["http://0.0.0.0:2000","hm-rpc.0"]
2014-11-16 10:46:00.058  - error: controller instance system.adapter.hm-rpc.0 terminated with code 6
2014-11-16 10:46:00.059  - info: Restart adapter system.adapter.hm-rpc.0 because enabled</anonymous></anonymous></anonymous></anonymous>

immer noch vorhanden.

Beim Update des Adapter admin bleibt das Install-Fenster zum Schluss offen

$ ./iobroker upgrade admin
download https://github.com/ioBroker/ioBroker.admin/archive/master.zip
downloaded /opt/iobroker/lib/../tmp/admin.zip
unzip /opt/iobroker/lib/../tmp/admin.zip
copying /opt/iobroker/tmp/admin/ioBroker.admin-master to /opt/iobroker/adapter/admin(Version: 0.1.9)
delete /opt/iobroker/tmp/admin
npm install "/opt/iobroker/adapter/admin" --production --prefix "/opt/iobroker/adapter/admin"
got /opt/iobroker/adapter/admin/admin
upload admin.admin /opt/iobroker/adapter/admin/admin/index.html index.html text/html
upload admin.admin /opt/iobroker/adapter/admin/admin/admin.png admin.png image/png
Adapter "admin" updated

Gruß

Rainer

Bluefox

~~@Homoran:~~

Ich hatte gehofft, dass ihr in einem wohlverdienten Urlaub seid, weil es so ruhig wurde.

Doch jetzt kam wieder ein Update, leider ist der Fehler: `
War leider krank.

~~@Homoran:~~

2014-11-16 10:45:27.153  - error: uncaught exception: Cannot read property 'UNIT' of undefined

```` `

Habe gerade hm-rpc upgedated. Was sagt adapter jetzt?

Homoran

~~@Bluefox:~~

War leider krank. `
Dann erst mal: Gute Besserung!!!

~~@Bluefox:~~

Habe gerade hm-rpc upgedated. Was sagt adapter jetzt? `
:oops: :oops: Ich hatte heute Mittag die Cubox plattgemacht und neu aufgesetzt. Danach kam der Fehler nicht mehr. :oops: :oops:

Beim Cubietruck läuft der Neustart nach dem aktuellen update ohne Probleme durch.

Bei der Cubox ebenfalls.

In dashui sehe ich immer noch nicht die Datenpunkte der Geräte (weder bei CT noch bei der Cubox )

Nach dem Neuaufsetzen startete der log im admin aber erst nach ./iobroker stop und wieder start.

Außerdem muss man nach dem Update des js-controller (immer noch ) chmod +x iobroker auf der Konsole eingeben, damit man stoppen und starten kann.

Führt das beim Update aus dem Admin nicht zu Problemen, wenn man erst den controller und dann die Adapter updated?

Gruß

Rainer

Homoran

Ich habe versucht den art-net und den CUL-Adapter zu installieren.

Beide beenden sich mit Code 8

Im Log bei der Installation des Cul-Adapters wird man höflich aufgefordert den Entwickler zu informieren

dem komme ich hiermit gerne nach:

! 2014-12-03 11:30:08.219 - [32minfo[39m: iobroker npm http GET https://registry.npmjs.org/wordwrap
! 2014-12-03 11:30:08.275 - [32minfo[39m: iobroker npm
! 2014-12-03 11:30:08.282 - [32minfo[39m: iobroker http
! 2014-12-03 11:30:08.287 - [32minfo[39m: iobroker GET https://registry.npmjs.org/minimist
! 2014-12-03 11:30:08.527 - [32minfo[39m: iobroker npm
! 2014-12-03 11:30:08.545 - [32minfo[39m: iobroker http 200 https://registry.npmjs.org/wordwrap
! 2014-12-03 11:30:08.567 - [32minfo[39m: iobroker npm http 304 https://registry.npmjs.org/minimist
! 2014-12-03 11:30:08.636 - [32minfo[39m: iobroker npm
! 2014-12-03 11:30:08.638 - [32minfo[39m: iobroker
! 2014-12-03 11:30:08.641 - [32minfo[39m: iobroker http
! 2014-12-03 11:30:08.657 - [32minfo[39m: iobroker GET https://registry.npmjs.org/wordwrap/-/w … -0.0.2.tgz
! 2014-12-03 11:30:08.668 - [32minfo[39m: iobroker npm
! 2014-12-03 11:30:08.676 - [32minfo[39m: iobroker http GET https://registry.npmjs.org/minimist/-/m ... 0.0.10.tgz
! 2014-12-03 11:30:08.900 - [32minfo[39m: iobroker npm
! 2014-12-03 11:30:08.903 - [32minfo[39m: iobroker http
! 2014-12-03 11:30:08.910 - [32minfo[39m: iobroker 200 https://registry.npmjs.org/wordwrap/-/w ... -0.0.2.tgz
! 2014-12-03 11:30:08.939 - [32minfo[39m: iobroker npm
! 2014-12-03 11:30:08.941 - [32minfo[39m: iobroker
! 2014-12-03 11:30:08.946 - [32minfo[39m: iobroker http
! 2014-12-03 11:30:08.966 - [32minfo[39m: iobroker 200 https://registry.npmjs.org/minimist/-/m ... 0.0.10.tgz
! 2014-12-03 11:30:13.388 - [32minfo[39m: iobroker node-pre-gyp
! 2014-12-03 11:30:13.401 - [32minfo[39m: iobroker
! 2014-12-03 11:30:13.410 - [32minfo[39m: iobroker http GET https://node-serialport.s3.amazonaws.co ... arm.tar.gz
! 2014-12-03 11:30:14.236 - [32minfo[39m: iobroker node-pre-gyp
! 2014-12-03 11:30:14.243 - [32minfo[39m: iobroker http
! 2014-12-03 11:30:14.254 - [32minfo[39m: iobroker 404 https://node-serialport.s3.amazonaws.co ... arm.tar.gz
! 2014-12-03 11:30:14.262 - [32minfo[39m: iobroker node-pre-gyp http
! 2014-12-03 11:30:14.272 - [32minfo[39m: iobroker Pre-built binary not available for your system (falling back to source compile with node-gyp)
! 2014-12-03 11:30:18.508 - [32minfo[39m: iobroker gyp
! 2014-12-03 11:30:18.518 - [32minfo[39m: iobroker
! 2014-12-03 11:30:18.534 - [32minfo[39m: iobroker ERR! build error
! 2014-12-03 11:30:18.567 - [32minfo[39m: iobroker gyp ERR!
! 2014-12-03 11:30:18.569 - [32minfo[39m: iobroker stack
! 2014-12-03 11:30:18.579 - [32minfo[39m: iobroker Error: not found: makegyp ERR!
! 2014-12-03 11:30:18.587 - [32minfo[39m: iobroker stack at F (/usr/local/lib/node_modules/npm/node_modules/which/which.js:43:28)
! 2014-12-03 11:30:18.594 - [32minfo[39m: iobroker gyp
! 2014-12-03 11:30:18.599 - [32minfo[39m: iobroker ERR!
! 2014-12-03 11:30:18.608 - [32minfo[39m: iobroker stack at E (/usr/local/lib/node_modules/npm/node_modules/which/which.js:46:29)
! 2014-12-03 11:30:18.613 - [32minfo[39m: iobroker gyp
! 2014-12-03 11:30:18.617 - [32minfo[39m: iobroker
! 2014-12-03 11:30:18.622 - [32minfo[39m: iobroker ERR! stack
! 2014-12-03 11:30:18.627 - [32minfo[39m: iobroker at /usr/local/lib/node_modules/npm/node_modules/which/which.js:57:16gyp
! 2014-12-03 11:30:18.645 - [32minfo[39m: iobroker ERR! stack at Object.oncomplete (fs.js:107:15)gyp ERR! System
! 2014-12-03 11:30:18.650 - [32minfo[39m: iobroker Linux 3.4.103-sun7i+gyp ERR!
! 2014-12-03 11:30:18.656 - [32minfo[39m: iobroker command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" "--name=serialport" "--configuration=Release" "--module_name=serialport" "--version=1.4.6" "--major=1" "--minor=4" "--patch=6" "--runtime=node" "--node_abi=node-v11" "--platform=linux" "--target_platform=linux" "--arch=arm" "--target_arch=arm" "--module_main=./serialport" "--host=https://node-serialport.s3.amazonaws.com/" "--module_path=/opt/iobroker/adapter/cul/node_modules/cul/node_modules/serialport/build/serialport/v1.4.6/Release/node-v11-linux-arm" "--remote_path=./serialport/v1.4.6/Release/" "--package_name=node-v11-linux-arm.tar.gz" "--staged_tarball=build/stage/serialport/v1.4.6/Release/node-v11-linux-arm.tar.gz" "--hosted_path=https://node-serialport.s3.amazonaws.co ... 6/Release/" "--hosted_tarball=https://node-serialport.s3.amazonaws.co ... arm.tar.gz"
! 2014-12-03 11:30:18.660 - [32minfo[39m: iobroker gyp ERR!
! 2014-12-03 11:30:18.665 - [32minfo[39m: iobroker cwd /opt/iobroker/adapter/cul/node_modules/cul/node_modules/serialportgyp ERR!
! 2014-12-03 11:30:18.683 - [32minfo[39m: iobroker node -v v0.10.22gyp ERR! node-gyp -v v0.11.0
! gyp ERR! not ok
! 2014-12-03 11:30:18.699 - [32minfo[39m: iobroker node-pre-gyp
! 2014-12-03 11:30:18.702 - [32minfo[39m: iobroker
! 2014-12-03 11:30:18.705 - [32minfo[39m: iobroker ERR!
! 2014-12-03 11:30:18.717 - [32minfo[39m: iobroker build error
! 2014-12-03 11:30:18.757 - [32minfo[39m: iobroker node-pre-gyp
! 2014-12-03 11:30:18.760 - [32minfo[39m: iobroker
! 2014-12-03 11:30:18.771 - [32minfo[39m: iobroker ERR! stack Error: Failed to execute '/usr/local/bin/node rebuild --name=serialport --configuration=Release --module_name=serialport --version=1.4.6 --major=1 --minor=4 --patch=6 --runtime=node --node_abi=node-v11 --platform=linux --target_platform=linux --arch=arm --target_arch=arm --module_main=./serialport --host=https://node-serialport.s3.amazonaws.com/ --module_path=/opt/iobroker/adapter/cul/node_modules/cul/node_modules/serialport/build/serialport/v1.4.6/Release/node-v11-linux-arm --remote_path=./serialport/v1.4.6/Release/ --package_name=node-v11-linux-arm.tar.gz --staged_tarball=build/stage/serialport/v1.4.6/Release/node-v11-linux-arm.tar.gz --hosted_path=https://node-serialport.s3.amazonaws.co ... 6/Release/ --hosted_tarball=https://node-serialport.s3.amazonaws.co ... arm.tar.gz' (1)node-pre-gyp
! 2014-12-03 11:30:18.781 - [32minfo[39m: iobroker ERR! stack at ChildProcess. <anonymous>(/opt/iobroker/adapter/cul/node_modules/cul/node_modules/serialport/node_modules/node-pre-gyp/lib/util/compile.js:76:29)
! 2014-12-03 11:30:18.790 - [32minfo[39m: iobroker node-pre-gyp ERR! stack
! 2014-12-03 11:30:18.800 - [32minfo[39m: iobroker at ChildProcess.EventEmitter.emit (events.js:98:17)node-pre-gyp ERR! stack at maybeClose (child_process.js:735:16)
! node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:802:5)
! node-pre-gyp
! 2014-12-03 11:30:18.810 - [32minfo[39m: iobroker ERR! System Linux 3.4.103-sun7i+
! 2014-12-03 11:30:18.820 - [32minfo[39m: iobroker node-pre-gyp ERR! command "node" "/opt/iobroker/adapter/cul/node_modules/cul/node_modules/serialport/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
! 2014-12-03 11:30:18.829 - [32minfo[39m: iobroker node-pre-gyp ERR! cwd /opt/iobroker/adapter/cul/node_modules/cul/node_modules/serialport
! 2014-12-03 11:30:18.848 - [32minfo[39m: iobroker node-pre-gyp ERR! node -v v0.10.22node-pre-gyp ERR!
! 2014-12-03 11:30:18.858 - [32minfo[39m: iobroker node-pre-gyp -v v0.5.19node-pre-gyp ERR! not ok
! 2014-12-03 11:30:19.945 - [32minfo[39m: iobroker npm ERR! serialport@1.4.6 install: node-pre-gyp install --fallback-to-buildnpm
! 2014-12-03 11:30:19.947 - [32minfo[39m: iobroker ERR!
! 2014-12-03 11:30:19.952 - [32minfo[39m: iobroker Exit status 1
! 2014-12-03 11:30:19.965 - [32minfo[39m: iobroker npm ERR!
! 2014-12-03 11:30:19.969 - [32minfo[39m: iobroker npm
! 2014-12-03 11:30:19.974 - [32minfo[39m: iobroker ERR! Failed at the serialport@1.4.6 install script.
! 2014-12-03 11:30:19.979 - [32minfo[39m: iobroker npm ERR! This is most likely a problem with the serialport package,npm
! 2014-12-03 11:30:19.983 - [32minfo[39m: iobroker ERR! not with npm itself.npm
! 2014-12-03 11:30:19.988 - [32minfo[39m: iobroker ERR! Tell the author that this fails on your system:npm
! 2014-12-03 11:30:19.993 - [32minfo[39m: iobroker ERR! node-pre-gyp install --fallback-to-build
! 2014-12-03 11:30:20.016 - [32minfo[39m: iobroker npm ERR! You can get their info via:npm ERR! npm owner ls serialport
! npm ERR! There is likely additional logging output above.
! npm
! 2014-12-03 11:30:20.021 - [32minfo[39m: iobroker ERR!
! 2014-12-03 11:30:20.031 - [32minfo[39m: iobroker System Linux 3.4.103-sun7i+npm
! 2014-12-03 11:30:20.038 - [32minfo[39m: iobroker ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "install" "/opt/iobroker/lib/../adapter/cul" "--production" "--prefix" "/opt/iobroker/lib/../adapter/cul"npm ERR! cwd /opt
! npm
! 2014-12-03 11:30:20.043 - [32minfo[39m: iobroker ERR! node -v v0.10.22
! 2014-12-03 11:30:20.064 - [32minfo[39m: iobroker npm
! 2014-12-03 11:30:20.075 - [32minfo[39m: iobroker ERR! npm -v 1.3.14npm ERR! code ELIFECYCLE
! 2014-12-03 11:30:20.542 - [32minfo[39m: iobroker npm
! 2014-12-03 11:30:20.551 - [32minfo[39m: iobroker
! 2014-12-03 11:30:20.559 - [32minfo[39m: iobroker ERR!
! 2014-12-03 11:30:20.573 - [32minfo[39m: iobroker npm ERR! Additional logging details can be found in:
! npm ERR!
! 2014-12-03 11:30:20.601 - [32minfo[39m: iobroker /opt/npm-debug.lognpm ERR! not ok code 0
! 2014-12-03 11:30:20.809 - [32minfo[39m: iobroker got /opt/iobroker/lib/../adapter/cul/admin
! 2014-12-03 11:30:20.886 - [32minfo[39m: iobroker upload cul.admin /opt/iobroker/lib/../adapter/cul/admin/busware.jpg busware.jpg image/jpeg
! 2014-12-03 11:30:21.497 - [32minfo[39m: iobroker object system.adapter.cul created
! 2014-12-03 11:30:21.707 - [32minfo[39m: iobroker object cul.meta.roles created
! 2014-12-03 11:30:22.015 - [32minfo[39m: iobroker object _design/cul created
! 2014-12-03 11:30:22.400 - [32minfo[39m: iobroker create instance cul
! 2014-12-03 11:30:22.492 - [32minfo[39m: iobroker object system.adapter.cul.0.connected created
! 2014-12-03 11:30:22.667 - [32minfo[39m: iobroker object system.adapter.cul.0.alive created
! 2014-12-03 11:30:22.873 - [32minfo[39m: iobroker object system.adapter.cul.0 created
! 2014-12-03 11:30:22.948 - [32minfo[39m: iobroker exit 0
! 2014-12-03 11:30:22.977 - [32minfo[39m: controller object change system.adapter.cul.0[/spoiler]</anonymous>

EDIT:

Nachdem ich jetzt wieder laufende Installationen habe, habe ich mal diverse Adapter installiert.

Dabei kamen verschiedene Fehler zustande. Diese habe ich hier mal zusammengestellt.

Ich möchte NICHT meckern, sondern nur den aktuellen Status vermelden.

admin: 	nach update muss chmod+x iobroker gefahren werden
artnet: 	beendet mit code 8
cul : 	beendet mit code 8; "Tell the author that this fails on your system:npm"
dwd: 	warn - Do not use parent or children for dwd.0.warning
hm-rega: 	alles ok
hm-rpc: 	alles ok
Legacy: 	Datenpunkte der Geräte unter Variablen; Datenpunkte dort tlw. 2-3fach
ping:	error: uncaught exception: Cannot call method 'replace' of undefined
	error: TypeError: Cannot call method 'replace' of undefined
	    at /opt/iobroker/adapter/ping/main.js:192:43
	    at /opt/iobroker/lib/adapter.js:917:44
	    at /opt/iobroker/lib/couch.js:158:13
	    at Request._callback (/opt/iobroker/node_modules/nano/nano.js:303:11)
	    at Request.self.callback (/opt/iobroker/node_modules/nano/node_modules/request/request.js:122:22)
	    at Request.EventEmitter.emit (events.js:98:17)
	    at Request. <anonymous>(/opt/iobroker/node_modules/nano/node_modules/request/request.js:888:14)
	    at Request.EventEmitter.emit (events.js:117:20)
	    at IncomingMessage. <anonymous>(/opt/iobroker/node_modules/nano/node_modules/request/request.js:839:12)
	    at IncomingMessage.EventEmitter.emit (events.js:117:20)
	error: controller instance system.adapter.ping.0 terminated with code 6
rickshaw: 	Failed to load resource: the server responded with a status of 404 (Not Found)	http://192.168.xxx.yyy:8082/socket.io/?key=&EIO=3&transport=polling&t=1417628254816-1 
		Failed to load resource: the server responded with a status of 404 (Not Found)      socket.io.js:2680 
		GET http://192.168.xxx.yyy:8082/socket.io/?key=&EIO=3&transport=polling&t=1417628256867-2 404 (Not Found)	socket.io.js:2680 
		GET http://192.168.xxx.yyy:8082/socket.io/?key=&EIO=3&transport=polling&t=1417628259927-3 404 (Not Found)	socket.io.js:2680 
		GET http://192.168.xxx.yyy:8082/socket.io/?key=&EIO=3&transport=polling&t=1417628263983-4 404 (Not Found)</anonymous></anonymous>

Gruß

Rainer
671_unbenannt.png
671_neues_textdokument.txt

Homoran

Eben gab es neue updates.

Nach dem update des controllers läuft es nicht mehr richtig.

Eine Fehlermeldung:

 root@cubie:/opt/iobroker# ./iobroker update                                                                       
Error: Object "system.config" not found

Gruß

Rainer

Gesendet von meinem LIFETAB_E10320 mit Tapatalk
671_unbenannt.png

ma.iogo-mail.ch

Salü Rainer,

wie ich gesehen habe, arbeitet Bluefox gewaltig an dem Code.

Lassen wir Ihn machen, und Morgen probieren wir es nocheinmal.

Da sind die Files (master-files) noch nicht vorhanden.

Gute Nachtruhe,

Danke an Bluefox.

Däni
671_unbenannt.png

NEWS

Installation ioBroker auf Cubietruck

Support us

508
Online

31.9k
Users

80.1k
Topics

1.3m
Posts

NEWS

Installation ioBroker auf Cubietruck

Support us

508Online

31.9kUsers

80.1kTopics

1.3mPosts

508
Online

31.9k
Users

80.1k
Topics

1.3m
Posts