npm error code EACCES
-
Nein, sind sie nicht. Jedenfalls nicht funktionierend.
Stimmt nicht ganz, es muss viel manuell nachjustiert werden, aber das Projekt ist nicht verloren.
jvfle@raspberrypi:~ $ sudo chown -R iobroker:iobroker /home/iobroker/ jvfle@raspberrypi:~ $ ls -la /home/iobroker insgesamt 160 drwxr-x--- 5 iobroker iobroker 4096 28. Mär 17:53 . drwxr-xr-x 4 root root 4096 28. Mär 18:34 .. -rw-r-xr-- 1 iobroker iobroker 220 28. Mär 17:53 .bash_logout -rw-r-xr-- 1 iobroker iobroker 3523 28. Mär 17:53 .bashrc drwxr-xr-x 3 iobroker iobroker 4096 28. Mär 17:53 .cache -rw-r--r-- 1 iobroker iobroker 38213 28. Mär 17:53 .diag.sh -rw-r--r-- 1 iobroker iobroker 50235 28. Mär 17:53 .fix.sh -rw-r--r-- 1 iobroker iobroker 28651 28. Mär 17:53 iob_diag.log drwxr-xr-x 9 iobroker iobroker 4096 28. Mär 17:53 node_modules drwxr-xr-x 7 iobroker iobroker 4096 28. Mär 17:53 .npm -rw-r--r-- 1 iobroker iobroker 66 28. Mär 17:53 package.json -rw-r--r-- 1 iobroker iobroker 3586 28. Mär 17:53 package-lock.json -rw-r-xr-- 1 iobroker iobroker 807 28. Mär 17:53 .profile jvfle@raspberrypi:~ $ Muss man die Kommandos nur oft genug wiederholen, bis alle Rechte korrigiert sind? -
Nein, sind sie nicht. Jedenfalls nicht funktionierend.
Stimmt nicht ganz, es muss viel manuell nachjustiert werden, aber das Projekt ist nicht verloren.
jvfle@raspberrypi:~ $ sudo chown -R iobroker:iobroker /home/iobroker/ jvfle@raspberrypi:~ $ ls -la /home/iobroker insgesamt 160 drwxr-x--- 5 iobroker iobroker 4096 28. Mär 17:53 . drwxr-xr-x 4 root root 4096 28. Mär 18:34 .. -rw-r-xr-- 1 iobroker iobroker 220 28. Mär 17:53 .bash_logout -rw-r-xr-- 1 iobroker iobroker 3523 28. Mär 17:53 .bashrc drwxr-xr-x 3 iobroker iobroker 4096 28. Mär 17:53 .cache -rw-r--r-- 1 iobroker iobroker 38213 28. Mär 17:53 .diag.sh -rw-r--r-- 1 iobroker iobroker 50235 28. Mär 17:53 .fix.sh -rw-r--r-- 1 iobroker iobroker 28651 28. Mär 17:53 iob_diag.log drwxr-xr-x 9 iobroker iobroker 4096 28. Mär 17:53 node_modules drwxr-xr-x 7 iobroker iobroker 4096 28. Mär 17:53 .npm -rw-r--r-- 1 iobroker iobroker 66 28. Mär 17:53 package.json -rw-r--r-- 1 iobroker iobroker 3586 28. Mär 17:53 package-lock.json -rw-r-xr-- 1 iobroker iobroker 807 28. Mär 17:53 .profile jvfle@raspberrypi:~ $ Muss man die Kommandos nur oft genug wiederholen, bis alle Rechte korrigiert sind? -
========== Start marking the full check here =========== ```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 12:17:11 up 1:34, 1 user, load average: 0.52, 0.70, 0.71 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sun 2026-04-26 12:17:11 CEST Universal time: Sun 2026-04-26 10:17:11 UTC RTC time: Sun 2026-04-26 10:17:11 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': jvfle HOME=/home/jvfle GROUPS=jvfle adm dialout cdrom sudo audio video plugdev games users netdev lpadmin gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/jvfle GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: true Display-Manager: * lightdm.service - Light Display Manager Desktop: rpd-labwc Session: wayland System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 3.9G 2.4G 251M 2.5G 4.6G Swap: 2.1G 0B 2.1G Total: 10G 3.9G 4.6G Active iob-Instances: 24 8058 M total memory 3681 M used memory 3781 M active memory 1310 M inactive memory 2302 M free memory 168 M buffer memory 2231 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 12:17:11 up 1:34, 1 user, load average: 0.52, 0.70, 0.71 Tasks: 272 total, 2 running, 270 sleeping, 0 stopped, 0 zombie %Cpu(s): 28.6 us, 0.0 sy, 0.0 ni, 71.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8058.9 total, 2296.9 free, 3686.6 used, 2401.8 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 4372.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 16M 1.6G 1% /run /dev/nvme0n1p2 ext4 469G 21G 429G 5% / tmpfs tmpfs 4.0G 55M 3.9G 2% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 4.0G 23M 4.0G 1% /tmp /dev/nvme0n1p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service tmpfs tmpfs 806M 304K 806M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Apr 26 10:43:12 2026] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs [Sun Apr 26 10:43:12 2026] EXT4-fs (nvme0n1p2): mounted filesystem d6944274-f2f7-4644-96a4-213c3b367f5c ro with ordered data mode. Quota mode: none. [Sun Apr 26 10:43:13 2026] EXT4-fs (nvme0n1p2): re-mounted d6944274-f2f7-4644-96a4-213c3b367f5c r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p2 ext4 rw,noatime `-/boot/firmware /dev/nvme0n1p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 4.7G /var/ 2.5G /var/cache 2.4G /var/cache/apt 2.3G /var/cache/apt/archives 265M /var/lib Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 933M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 467M /opt/iobroker/iobroker-data/ 362M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 64M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/files/modbus.admin/assets/index-6vd4TbNS.js 8.2M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BDfRPp5J.js 7.0M /opt/iobroker/iobroker-data/states.jsonl 6.5M /opt/iobroker/iobroker-data/files/vis.0/Dashboard/vis-views.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 5627) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 1 +-- iobroker.slideshow@0.2.1 (git+ssh://git@github.com/gaudes/ioBroker.slideshow.git#8106f8a17407036e34f9ee63f4da866d0f03115b) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : raspberrypi - disabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: raspberrypi - disabled system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.iqontrol.0 : iqontrol : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.nina.0 : nina : raspberrypi - disabled + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled + system.adapter.parser.0 : parser : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.slideshow.0 : slideshow : raspberrypi - enabled + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - disabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.weather-warnings.0 : weather-warnings : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - disabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.webcal.0 : webcal : raspberrypi - enabled system.adapter.webcal.1 : webcal : raspberrypi - enabled system.adapter.zigbee2mqtt.0 : zigbee2mqtt : raspberrypi - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alarm" : 3.7.6 , installed 3.7.6 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "energiefluss-erweitert": 0.8.1, installed 0.8.1 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "history" : 4.0.0 , installed 4.0.0 Adapter "ical" : 1.20.0 , installed 1.20.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "modbus" : 8.0.3 , installed 8.0.3 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "node-red" : 6.0.7 , installed 6.0.7 Adapter "openweathermap": 1.4.0 , installed 1.4.0 Adapter "parser" : 3.0.0 , installed 3.0.0 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.0.8 , installed 7.1.3 Adapter "sonoff" : 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2-widgets-gauges": 2.0.2, installed 2.0.2 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-icontwo" : 2.11.3 , installed 2.11.3 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.3 , installed 1.1.3 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weather-warnings": 0.10.0, installed 0.10.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "ws" : 4.0.0 , installed 3.0.19 [Updatable] Objects and States Please stand by - This may take a while Objects: 7746 States: 6801 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 http://deb.debian.org/debian-security trixie-security InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 4051 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8726 1027/sshd: /usr/sbi tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 16457 2448/io.mqtt.0 tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 45373 4994/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 16367 2689/io.sonoff.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 27800 3646/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 8930 1015/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 8925 1015/iobroker.js-co tcp6 0 0 ::1:631 :::* LISTEN 0 27799 3646/cupsd tcp6 0 0 :::111 :::* LISTEN 0 4052 1/init tcp6 0 0 :::22 :::* LISTEN 0 8728 1027/sshd: /usr/sbi tcp6 0 0 :::9090 :::* LISTEN 0 4982 1/init tcp6 0 0 :::8081 :::* LISTEN 1001 9987 1175/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 46764 5282/io.web.0 udp 0 0 0.0.0.0:39411 0.0.0.0:* 101 7626 746/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 47119 5044/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 47120 5044/io.tuya.0 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 4277 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 7624 746/avahi-daemon: r udp6 0 0 :::42766 :::* 101 7627 746/avahi-daemon: r udp6 0 0 :::111 :::* 0 4278 1/init udp6 0 0 :::5353 :::* 101 7625 746/avahi-daemon: r *** Log File - Last 25 Lines *** // What the document is loaded document.addEventListener('DOMContentLoaded', (event) => { // detect theme, dark or light if (window.matchMedia('(prefers-color-scheme: dark)').matches) { document.body.style.backgroundColor = '#263238'; document.body.style.color = '#eceff1'; } }); </script> </head> <body> <div class="container"> <h1>404</h1> <p>Datei Bilder/Icon/slideshow.png nicht gefunden</p> <a onclick="goHome()">Zur Homepage</a> <a onclick="refresh()">Aktualisieren</a> </div> </body> </html> 2026-04-26 12:16:45.757 - debug: cloud.0 (2159) Connection attempt to https://iobroker.pro:10556 ... 2026-04-26 12:16:45.763 - info: cloud.0 (2159) Trying to connect as system.user.admin to cloud 2026-04-26 12:16:46.038 - debug: cloud.0 (2159) Connected. Check api key... 2026-04-26 12:16:46.078 - debug: cloud.0 (2159) API KEY OK 2026-04-26 12:16:46.079 - info: cloud.0 (2159) Connection changed: connect 2026-04-26 12:17:08.116 - debug: cloud.0 (2159) Subscribes: no subscribes ============ Mark until here for C&P ============= iob diag has finished. ... jvfle@raspberrypi:~ $jvfle@raspberrypi:~ $ iob fix
Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) library: loaded Library version=2026-02-01 ioBroker or some processes are still running: 1015 iobroker.js-con 1175 io.admin.0 1958 io.javascript.0 2108 io.backitup.0 2159 io.cloud.0 2247 io.modbus.0 2448 io.mqtt.0 2540 io.ping.0 2618 io.pollenflug.0 2637 io.shelly.0 2689 io.sonoff.0 2793 io.discovery.0 2862 io.email.0 2916 io.fritzdect.0 2932 io.iqontrol.0 2984 io.parser.0 3048 io.slideshow.0 3092 io.vis-inventwo 3161 io.weather-warn 4693 io.history.0 4978 io.node-red.0 5044 io.tuya.0 5266 io.energiefluss 5282 io.web.0 Please stop them first and try again! ... jvfle@raspberrypi:~ $Grandios.
Ich hatte gerade versucht die Adapter upzudaten und es funktioniert jetzt, super. ioBroker-Vis, die Adapter, die neue APK App (bis auf die beschriebenen Kleinigkeiten) reagieren wie vorher. Vielen Dank für deine Zeit und Hilfe.Wo kann ich dir denn einen Kaffee ausgeben?
Ich beende den Post noch nicht. Ich will erst alles ausprobieren und dann berichten.
Nochmals, viel Dank.
BGIch hatte erst iob diag, dann iob fix angefangen, wie angezeigt. Soll ich noch iob fix durchlaufen lassen?
-
========== Start marking the full check here =========== ```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 12:17:11 up 1:34, 1 user, load average: 0.52, 0.70, 0.71 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sun 2026-04-26 12:17:11 CEST Universal time: Sun 2026-04-26 10:17:11 UTC RTC time: Sun 2026-04-26 10:17:11 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': jvfle HOME=/home/jvfle GROUPS=jvfle adm dialout cdrom sudo audio video plugdev games users netdev lpadmin gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/jvfle GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: true Display-Manager: * lightdm.service - Light Display Manager Desktop: rpd-labwc Session: wayland System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 3.9G 2.4G 251M 2.5G 4.6G Swap: 2.1G 0B 2.1G Total: 10G 3.9G 4.6G Active iob-Instances: 24 8058 M total memory 3681 M used memory 3781 M active memory 1310 M inactive memory 2302 M free memory 168 M buffer memory 2231 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 12:17:11 up 1:34, 1 user, load average: 0.52, 0.70, 0.71 Tasks: 272 total, 2 running, 270 sleeping, 0 stopped, 0 zombie %Cpu(s): 28.6 us, 0.0 sy, 0.0 ni, 71.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8058.9 total, 2296.9 free, 3686.6 used, 2401.8 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 4372.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 16M 1.6G 1% /run /dev/nvme0n1p2 ext4 469G 21G 429G 5% / tmpfs tmpfs 4.0G 55M 3.9G 2% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 4.0G 23M 4.0G 1% /tmp /dev/nvme0n1p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service tmpfs tmpfs 806M 304K 806M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Apr 26 10:43:12 2026] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs [Sun Apr 26 10:43:12 2026] EXT4-fs (nvme0n1p2): mounted filesystem d6944274-f2f7-4644-96a4-213c3b367f5c ro with ordered data mode. Quota mode: none. [Sun Apr 26 10:43:13 2026] EXT4-fs (nvme0n1p2): re-mounted d6944274-f2f7-4644-96a4-213c3b367f5c r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p2 ext4 rw,noatime `-/boot/firmware /dev/nvme0n1p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 4.7G /var/ 2.5G /var/cache 2.4G /var/cache/apt 2.3G /var/cache/apt/archives 265M /var/lib Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 933M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 467M /opt/iobroker/iobroker-data/ 362M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 64M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/files/modbus.admin/assets/index-6vd4TbNS.js 8.2M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BDfRPp5J.js 7.0M /opt/iobroker/iobroker-data/states.jsonl 6.5M /opt/iobroker/iobroker-data/files/vis.0/Dashboard/vis-views.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 5627) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 1 +-- iobroker.slideshow@0.2.1 (git+ssh://git@github.com/gaudes/ioBroker.slideshow.git#8106f8a17407036e34f9ee63f4da866d0f03115b) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : raspberrypi - disabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: raspberrypi - disabled system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.iqontrol.0 : iqontrol : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.nina.0 : nina : raspberrypi - disabled + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled + system.adapter.parser.0 : parser : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.slideshow.0 : slideshow : raspberrypi - enabled + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - disabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.weather-warnings.0 : weather-warnings : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - disabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.webcal.0 : webcal : raspberrypi - enabled system.adapter.webcal.1 : webcal : raspberrypi - enabled system.adapter.zigbee2mqtt.0 : zigbee2mqtt : raspberrypi - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alarm" : 3.7.6 , installed 3.7.6 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "energiefluss-erweitert": 0.8.1, installed 0.8.1 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "history" : 4.0.0 , installed 4.0.0 Adapter "ical" : 1.20.0 , installed 1.20.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "modbus" : 8.0.3 , installed 8.0.3 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "node-red" : 6.0.7 , installed 6.0.7 Adapter "openweathermap": 1.4.0 , installed 1.4.0 Adapter "parser" : 3.0.0 , installed 3.0.0 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.0.8 , installed 7.1.3 Adapter "sonoff" : 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2-widgets-gauges": 2.0.2, installed 2.0.2 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-icontwo" : 2.11.3 , installed 2.11.3 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.3 , installed 1.1.3 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weather-warnings": 0.10.0, installed 0.10.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "ws" : 4.0.0 , installed 3.0.19 [Updatable] Objects and States Please stand by - This may take a while Objects: 7746 States: 6801 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 http://deb.debian.org/debian-security trixie-security InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 4051 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8726 1027/sshd: /usr/sbi tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 16457 2448/io.mqtt.0 tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 45373 4994/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 16367 2689/io.sonoff.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 27800 3646/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 8930 1015/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 8925 1015/iobroker.js-co tcp6 0 0 ::1:631 :::* LISTEN 0 27799 3646/cupsd tcp6 0 0 :::111 :::* LISTEN 0 4052 1/init tcp6 0 0 :::22 :::* LISTEN 0 8728 1027/sshd: /usr/sbi tcp6 0 0 :::9090 :::* LISTEN 0 4982 1/init tcp6 0 0 :::8081 :::* LISTEN 1001 9987 1175/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 46764 5282/io.web.0 udp 0 0 0.0.0.0:39411 0.0.0.0:* 101 7626 746/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 47119 5044/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 47120 5044/io.tuya.0 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 4277 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 7624 746/avahi-daemon: r udp6 0 0 :::42766 :::* 101 7627 746/avahi-daemon: r udp6 0 0 :::111 :::* 0 4278 1/init udp6 0 0 :::5353 :::* 101 7625 746/avahi-daemon: r *** Log File - Last 25 Lines *** // What the document is loaded document.addEventListener('DOMContentLoaded', (event) => { // detect theme, dark or light if (window.matchMedia('(prefers-color-scheme: dark)').matches) { document.body.style.backgroundColor = '#263238'; document.body.style.color = '#eceff1'; } }); </script> </head> <body> <div class="container"> <h1>404</h1> <p>Datei Bilder/Icon/slideshow.png nicht gefunden</p> <a onclick="goHome()">Zur Homepage</a> <a onclick="refresh()">Aktualisieren</a> </div> </body> </html> 2026-04-26 12:16:45.757 - debug: cloud.0 (2159) Connection attempt to https://iobroker.pro:10556 ... 2026-04-26 12:16:45.763 - info: cloud.0 (2159) Trying to connect as system.user.admin to cloud 2026-04-26 12:16:46.038 - debug: cloud.0 (2159) Connected. Check api key... 2026-04-26 12:16:46.078 - debug: cloud.0 (2159) API KEY OK 2026-04-26 12:16:46.079 - info: cloud.0 (2159) Connection changed: connect 2026-04-26 12:17:08.116 - debug: cloud.0 (2159) Subscribes: no subscribes ============ Mark until here for C&P ============= iob diag has finished. ... jvfle@raspberrypi:~ $jvfle@raspberrypi:~ $ iob fix
Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) library: loaded Library version=2026-02-01 ioBroker or some processes are still running: 1015 iobroker.js-con 1175 io.admin.0 1958 io.javascript.0 2108 io.backitup.0 2159 io.cloud.0 2247 io.modbus.0 2448 io.mqtt.0 2540 io.ping.0 2618 io.pollenflug.0 2637 io.shelly.0 2689 io.sonoff.0 2793 io.discovery.0 2862 io.email.0 2916 io.fritzdect.0 2932 io.iqontrol.0 2984 io.parser.0 3048 io.slideshow.0 3092 io.vis-inventwo 3161 io.weather-warn 4693 io.history.0 4978 io.node-red.0 5044 io.tuya.0 5266 io.energiefluss 5282 io.web.0 Please stop them first and try again! ... jvfle@raspberrypi:~ $Grandios.
Ich hatte gerade versucht die Adapter upzudaten und es funktioniert jetzt, super. ioBroker-Vis, die Adapter, die neue APK App (bis auf die beschriebenen Kleinigkeiten) reagieren wie vorher. Vielen Dank für deine Zeit und Hilfe.Wo kann ich dir denn einen Kaffee ausgeben?
Ich beende den Post noch nicht. Ich will erst alles ausprobieren und dann berichten.
Nochmals, viel Dank.
BGIch hatte erst iob diag, dann iob fix angefangen, wie angezeigt. Soll ich noch iob fix durchlaufen lassen?
-
jvfle@raspberrypi:~ $ iob fix Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) library: loaded Library version=2026-02-01 ioBroker or some processes are still running: 1015 iobroker.js-con 1175 io.admin.0 1958 io.javascript.0 2108 io.backitup.0 2159 io.cloud.0 2247 io.modbus.0 2448 io.mqtt.0 2540 io.ping.0 2618 io.pollenflug.0 2637 io.shelly.0 2689 io.sonoff.0 2793 io.discovery.0 2862 io.email.0 2916 io.fritzdect.0 2932 io.iqontrol.0 2984 io.parser.0 3048 io.slideshow.0 3092 io.vis-inventwo 3161 io.weather-warn 4693 io.history.0 4978 io.node-red.0 5044 io.tuya.0 5266 io.energiefluss 5282 io.web.0 Please stop them first and try again! jvfle@raspberrypi:~ $ iob stop jvfle@raspberrypi:~ $ iobfix bash: iobfix: Kommando nicht gefunden. jvfle@raspberrypi:~ $ iob fix Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) New boot target is multi-user now! The system needs to be restarted. Please restart the fixer afterwards. Removed '/etc/systemd/system/default.target'. Created symlink '/etc/systemd/system/default.target' → '/usr/lib/systemd/system/multi-user.target'. library: loaded Library version=2026-02-01 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2025-09-08 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== OK:1 http://deb.debian.org/debian trixie InRelease OK:2 http://archive.raspberrypi.com/debian trixie InRelease OK:3 http://deb.debian.org/debian trixie-updates InRelease OK:4 http://deb.debian.org/debian-security trixie-security InRelease OK:5 https://deb.nodesource.com/node_22.x nodistro InRelease Paketlisten werden gelesen… Fertig ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== jvfle@raspberrypi:~ $========== Start marking the full check here =========== ```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 12:31:13 up 1:48, 1 user, load average: 1.87, 1.30, 1.10 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sun 2026-04-26 12:31:13 CEST Universal time: Sun 2026-04-26 10:31:13 UTC RTC time: Sun 2026-04-26 10:31:13 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': jvfle HOME=/home/jvfle GROUPS=jvfle adm dialout cdrom sudo audio video plugdev games users netdev lpadmin gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/jvfle GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: true Display-Manager: * lightdm.service - Light Display Manager Desktop: rpd-labwc Session: wayland *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 2.8G 3.2G 250M 2.8G 5.7G Swap: 2.1G 0B 2.1G Total: 10G 2.8G 5.4G Active iob-Instances: 5 8058 M total memory 2650 M used memory 2763 M active memory 1441 M inactive memory 3069 M free memory 200 M buffer memory 2465 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 12:31:14 up 1:48, 1 user, load average: 1.87, 1.30, 1.10 Tasks: 277 total, 1 running, 276 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.4 us, 0.0 sy, 0.0 ni, 97.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8058.9 total, 3067.4 free, 2651.9 used, 2665.3 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 5407.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 16M 1.6G 1% /run /dev/nvme0n1p2 ext4 469G 21G 429G 5% / tmpfs tmpfs 4.0G 39M 3.9G 1% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 4.0G 20M 4.0G 1% /tmp /dev/nvme0n1p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service tmpfs tmpfs 806M 304K 806M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Apr 26 10:43:12 2026] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs [Sun Apr 26 10:43:12 2026] EXT4-fs (nvme0n1p2): mounted filesystem d6944274-f2f7-4644-96a4-213c3b367f5c ro with ordered data mode. Quota mode: none. [Sun Apr 26 10:43:13 2026] EXT4-fs (nvme0n1p2): re-mounted d6944274-f2f7-4644-96a4-213c3b367f5c r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p2 ext4 rw,noatime `-/boot/firmware /dev/nvme0n1p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 4.7G /var/ 2.5G /var/cache 2.4G /var/cache/apt 2.3G /var/cache/apt/archives 265M /var/lib Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 933M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 438M /opt/iobroker/iobroker-data/ 362M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 64M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 11M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/files/modbus.admin/assets/index-6vd4TbNS.js 8.2M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BDfRPp5J.js 6.5M /opt/iobroker/iobroker-data/files/vis.0/Dashboard/vis-views.json 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 46) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 1 +-- iobroker.slideshow@0.2.1 (git+ssh://git@github.com/gaudes/ioBroker.slideshow.git#8106f8a17407036e34f9ee63f4da866d0f03115b) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : raspberrypi - disabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.cloud.0 : cloud : raspberrypi - enabled system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled system.adapter.email.0 : email : raspberrypi - enabled system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: raspberrypi - disabled system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled system.adapter.iqontrol.0 : iqontrol : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.modbus.0 : modbus : raspberrypi - enabled system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.nina.0 : nina : raspberrypi - disabled system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled system.adapter.parser.0 : parser : raspberrypi - enabled system.adapter.ping.0 : ping : raspberrypi - enabled system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.slideshow.0 : slideshow : raspberrypi - enabled system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - disabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weather-warnings.0 : weather-warnings : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - disabled system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.webcal.0 : webcal : raspberrypi - enabled system.adapter.webcal.1 : webcal : raspberrypi - enabled system.adapter.zigbee2mqtt.0 : zigbee2mqtt : raspberrypi - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alarm" : 3.7.6 , installed 3.7.6 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "energiefluss-erweitert": 0.8.1, installed 0.8.1 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "history" : 4.0.0 , installed 4.0.0 Adapter "ical" : 1.20.0 , installed 1.20.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "modbus" : 8.0.3 , installed 8.0.3 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "node-red" : 6.0.7 , installed 6.0.7 Adapter "openweathermap": 1.4.0 , installed 1.4.0 Adapter "parser" : 3.0.0 , installed 3.0.0 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.0.8 , installed 7.1.3 Adapter "sonoff" : 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2-widgets-gauges": 2.0.2, installed 2.0.2 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-icontwo" : 2.11.3 , installed 2.11.3 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.3 , installed 1.1.3 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weather-warnings": 0.10.0, installed 0.10.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "ws" : 4.0.0 , installed 3.0.19 [Updatable] Adapter "zigbee2mqtt" : 3.0.21 , installed 3.0.21 Objects and States Please stand by - This may take a while Objects: 7752 States: 6751 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://archive.raspberrypi.com/debian trixie InRelease Hit:4 http://deb.debian.org/debian-security trixie-security InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 4051 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8726 1027/sshd: /usr/sbi tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 67645 7795/io.mqtt.0 tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 67841 8104/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 66543 8198/io.sonoff.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 27800 3646/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 64970 7448/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 64965 7448/iobroker.js-co tcp6 0 0 ::1:631 :::* LISTEN 0 27799 3646/cupsd tcp6 0 0 :::111 :::* LISTEN 0 4052 1/init tcp6 0 0 :::22 :::* LISTEN 0 8728 1027/sshd: /usr/sbi tcp6 0 0 :::9090 :::* LISTEN 0 4982 1/init tcp6 0 0 :::8081 :::* LISTEN 1001 65046 7475/io.admin.0 udp 0 0 0.0.0.0:39411 0.0.0.0:* 101 7626 746/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 67936 8263/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 67937 8263/io.tuya.0 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 4277 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 7624 746/avahi-daemon: r udp6 0 0 :::42766 :::* 101 7627 746/avahi-daemon: r udp6 0 0 :::111 :::* 0 4278 1/init udp6 0 0 :::5353 :::* 101 7625 746/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-04-26 12:31:32.701 - warn: host.raspberrypi startInstance cannot find adapter "webcal@1.4.0". Try to install it... 1 attempt 2026-04-26 12:31:32.702 - info: host.raspberrypi iobroker install webcal@1.4.0 using installedFrom 2026-04-26 12:31:33.898 - info: host.raspberrypi iobroker npm-install: NPM version: 10.9.7Installing iobroker.webcal@1.4.0... (System call) 2026-04-26 12:31:39.417 - error: openweathermap.0 (7811) Error: Error: 401 2026-04-26 12:31:39.467 - info: openweathermap.0 (7811) Terminated (NO_ERROR): Without reason 2026-04-26 12:31:40.024 - info: host.raspberrypi instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2026-04-26 12:31:40.769 - info: host.raspberrypi iobroker npm-install: added 27 packages, and changed 2 packages in 7s341 packages are looking for funding run `npm fund` for detailshost.raspberrypi install adapter webcal@1.4.0 2026-04-26 12:31:40.915 - info: host.raspberrypi instance system.adapter.discovery.0 in version "5.0.0" started with pid 8424 2026-04-26 12:31:40.978 - info: host.raspberrypi iobroker npm-install: upload [12] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/de/translations.json i18n/de/translations.json application/json 2026-04-26 12:31:40.984 - info: host.raspberrypi iobroker npm-install: upload [11] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/en/translations.json i18n/en/translations.json application/json 2026-04-26 12:31:40.988 - info: host.raspberrypi iobroker npm-install: upload [10] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/es/translations.json i18n/es/translations.json application/json 2026-04-26 12:31:40.997 - info: host.raspberrypi iobroker npm-install: upload [9] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/fr/translations.json i18n/fr/translations.json application/json 2026-04-26 12:31:41.003 - info: host.raspberrypi iobroker npm-install: upload [8] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/it/translations.json i18n/it/translations.json application/json 2026-04-26 12:31:41.010 - info: host.raspberrypi iobroker npm-install: upload [7] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/nl/translations.json i18n/nl/translations.json application/json 2026-04-26 12:31:41.014 - info: host.raspberrypi iobroker npm-install: upload [6] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/pl/translations.json i18n/pl/translations.json application/json 2026-04-26 12:31:41.018 - info: host.raspberrypi iobroker npm-install: upload [5] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/pt/translations.json i18n/pt/translations.json application/json 2026-04-26 12:31:41.022 - info: host.raspberrypi iobroker npm-install: upload [4] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/ru/translations.json i18n/ru/translations.json application/json 2026-04-26 12:31:41.029 - info: host.raspberrypi iobroker npm-install: upload [3] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/uk/translations.json i18n/uk/translations.json application/json 2026-04-26 12:31:41.039 - info: host.raspberrypi iobroker npm-install: upload [2] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json 2026-04-26 12:31:41.042 - info: host.raspberrypi iobroker npm-install: upload [1] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/jsonConfig.json jsonConfig.json application/json 2026-04-26 12:31:41.046 - info: host.raspberrypi iobroker npm-install: upload [0] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/webcal.png webcal.png image/png 2026-04-26 12:31:41.088 - info: host.raspberrypi iobroker npm-install: host.raspberrypi object system.adapter.webcal created/updated 2026-04-26 12:31:41.089 - info: host.raspberrypi iobroker npm-install: Updating objects from io-package.json for adapter "webcal" with version "1.4.0" 2026-04-26 12:31:42.017 - info: discovery.0 (8424) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v22.22.2, js-controller: 7.0.7 2026-04-26 12:31:42.179 - info: host.raspberrypi iobroker npm-install: exit 0============ Mark until here for C&P =============
iob diag has finished.
jvfle@raspberrypi:~ $
-
jvfle@raspberrypi:~ $ iob fix Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) library: loaded Library version=2026-02-01 ioBroker or some processes are still running: 1015 iobroker.js-con 1175 io.admin.0 1958 io.javascript.0 2108 io.backitup.0 2159 io.cloud.0 2247 io.modbus.0 2448 io.mqtt.0 2540 io.ping.0 2618 io.pollenflug.0 2637 io.shelly.0 2689 io.sonoff.0 2793 io.discovery.0 2862 io.email.0 2916 io.fritzdect.0 2932 io.iqontrol.0 2984 io.parser.0 3048 io.slideshow.0 3092 io.vis-inventwo 3161 io.weather-warn 4693 io.history.0 4978 io.node-red.0 5044 io.tuya.0 5266 io.energiefluss 5282 io.web.0 Please stop them first and try again! jvfle@raspberrypi:~ $ iob stop jvfle@raspberrypi:~ $ iobfix bash: iobfix: Kommando nicht gefunden. jvfle@raspberrypi:~ $ iob fix Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) New boot target is multi-user now! The system needs to be restarted. Please restart the fixer afterwards. Removed '/etc/systemd/system/default.target'. Created symlink '/etc/systemd/system/default.target' → '/usr/lib/systemd/system/multi-user.target'. library: loaded Library version=2026-02-01 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2025-09-08 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== OK:1 http://deb.debian.org/debian trixie InRelease OK:2 http://archive.raspberrypi.com/debian trixie InRelease OK:3 http://deb.debian.org/debian trixie-updates InRelease OK:4 http://deb.debian.org/debian-security trixie-security InRelease OK:5 https://deb.nodesource.com/node_22.x nodistro InRelease Paketlisten werden gelesen… Fertig ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== jvfle@raspberrypi:~ $========== Start marking the full check here =========== ```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 12:31:13 up 1:48, 1 user, load average: 1.87, 1.30, 1.10 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sun 2026-04-26 12:31:13 CEST Universal time: Sun 2026-04-26 10:31:13 UTC RTC time: Sun 2026-04-26 10:31:13 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': jvfle HOME=/home/jvfle GROUPS=jvfle adm dialout cdrom sudo audio video plugdev games users netdev lpadmin gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/jvfle GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: true Display-Manager: * lightdm.service - Light Display Manager Desktop: rpd-labwc Session: wayland *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 2.8G 3.2G 250M 2.8G 5.7G Swap: 2.1G 0B 2.1G Total: 10G 2.8G 5.4G Active iob-Instances: 5 8058 M total memory 2650 M used memory 2763 M active memory 1441 M inactive memory 3069 M free memory 200 M buffer memory 2465 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 12:31:14 up 1:48, 1 user, load average: 1.87, 1.30, 1.10 Tasks: 277 total, 1 running, 276 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.4 us, 0.0 sy, 0.0 ni, 97.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8058.9 total, 3067.4 free, 2651.9 used, 2665.3 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 5407.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 16M 1.6G 1% /run /dev/nvme0n1p2 ext4 469G 21G 429G 5% / tmpfs tmpfs 4.0G 39M 3.9G 1% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 4.0G 20M 4.0G 1% /tmp /dev/nvme0n1p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service tmpfs tmpfs 806M 304K 806M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Apr 26 10:43:12 2026] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs [Sun Apr 26 10:43:12 2026] EXT4-fs (nvme0n1p2): mounted filesystem d6944274-f2f7-4644-96a4-213c3b367f5c ro with ordered data mode. Quota mode: none. [Sun Apr 26 10:43:13 2026] EXT4-fs (nvme0n1p2): re-mounted d6944274-f2f7-4644-96a4-213c3b367f5c r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p2 ext4 rw,noatime `-/boot/firmware /dev/nvme0n1p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 4.7G /var/ 2.5G /var/cache 2.4G /var/cache/apt 2.3G /var/cache/apt/archives 265M /var/lib Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 933M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 438M /opt/iobroker/iobroker-data/ 362M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 64M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 11M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/files/modbus.admin/assets/index-6vd4TbNS.js 8.2M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BDfRPp5J.js 6.5M /opt/iobroker/iobroker-data/files/vis.0/Dashboard/vis-views.json 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 46) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 1 +-- iobroker.slideshow@0.2.1 (git+ssh://git@github.com/gaudes/ioBroker.slideshow.git#8106f8a17407036e34f9ee63f4da866d0f03115b) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : raspberrypi - disabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.cloud.0 : cloud : raspberrypi - enabled system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled system.adapter.email.0 : email : raspberrypi - enabled system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: raspberrypi - disabled system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled system.adapter.iqontrol.0 : iqontrol : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.modbus.0 : modbus : raspberrypi - enabled system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.nina.0 : nina : raspberrypi - disabled system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled system.adapter.parser.0 : parser : raspberrypi - enabled system.adapter.ping.0 : ping : raspberrypi - enabled system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.slideshow.0 : slideshow : raspberrypi - enabled system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - disabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weather-warnings.0 : weather-warnings : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - disabled system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.webcal.0 : webcal : raspberrypi - enabled system.adapter.webcal.1 : webcal : raspberrypi - enabled system.adapter.zigbee2mqtt.0 : zigbee2mqtt : raspberrypi - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alarm" : 3.7.6 , installed 3.7.6 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "energiefluss-erweitert": 0.8.1, installed 0.8.1 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "history" : 4.0.0 , installed 4.0.0 Adapter "ical" : 1.20.0 , installed 1.20.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "modbus" : 8.0.3 , installed 8.0.3 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "node-red" : 6.0.7 , installed 6.0.7 Adapter "openweathermap": 1.4.0 , installed 1.4.0 Adapter "parser" : 3.0.0 , installed 3.0.0 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.0.8 , installed 7.1.3 Adapter "sonoff" : 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2-widgets-gauges": 2.0.2, installed 2.0.2 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-icontwo" : 2.11.3 , installed 2.11.3 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.3 , installed 1.1.3 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weather-warnings": 0.10.0, installed 0.10.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "ws" : 4.0.0 , installed 3.0.19 [Updatable] Adapter "zigbee2mqtt" : 3.0.21 , installed 3.0.21 Objects and States Please stand by - This may take a while Objects: 7752 States: 6751 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://archive.raspberrypi.com/debian trixie InRelease Hit:4 http://deb.debian.org/debian-security trixie-security InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 4051 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8726 1027/sshd: /usr/sbi tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 67645 7795/io.mqtt.0 tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 67841 8104/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 66543 8198/io.sonoff.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 27800 3646/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 64970 7448/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 64965 7448/iobroker.js-co tcp6 0 0 ::1:631 :::* LISTEN 0 27799 3646/cupsd tcp6 0 0 :::111 :::* LISTEN 0 4052 1/init tcp6 0 0 :::22 :::* LISTEN 0 8728 1027/sshd: /usr/sbi tcp6 0 0 :::9090 :::* LISTEN 0 4982 1/init tcp6 0 0 :::8081 :::* LISTEN 1001 65046 7475/io.admin.0 udp 0 0 0.0.0.0:39411 0.0.0.0:* 101 7626 746/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 67936 8263/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 67937 8263/io.tuya.0 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 4277 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 7624 746/avahi-daemon: r udp6 0 0 :::42766 :::* 101 7627 746/avahi-daemon: r udp6 0 0 :::111 :::* 0 4278 1/init udp6 0 0 :::5353 :::* 101 7625 746/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-04-26 12:31:32.701 - warn: host.raspberrypi startInstance cannot find adapter "webcal@1.4.0". Try to install it... 1 attempt 2026-04-26 12:31:32.702 - info: host.raspberrypi iobroker install webcal@1.4.0 using installedFrom 2026-04-26 12:31:33.898 - info: host.raspberrypi iobroker npm-install: NPM version: 10.9.7Installing iobroker.webcal@1.4.0... (System call) 2026-04-26 12:31:39.417 - error: openweathermap.0 (7811) Error: Error: 401 2026-04-26 12:31:39.467 - info: openweathermap.0 (7811) Terminated (NO_ERROR): Without reason 2026-04-26 12:31:40.024 - info: host.raspberrypi instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2026-04-26 12:31:40.769 - info: host.raspberrypi iobroker npm-install: added 27 packages, and changed 2 packages in 7s341 packages are looking for funding run `npm fund` for detailshost.raspberrypi install adapter webcal@1.4.0 2026-04-26 12:31:40.915 - info: host.raspberrypi instance system.adapter.discovery.0 in version "5.0.0" started with pid 8424 2026-04-26 12:31:40.978 - info: host.raspberrypi iobroker npm-install: upload [12] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/de/translations.json i18n/de/translations.json application/json 2026-04-26 12:31:40.984 - info: host.raspberrypi iobroker npm-install: upload [11] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/en/translations.json i18n/en/translations.json application/json 2026-04-26 12:31:40.988 - info: host.raspberrypi iobroker npm-install: upload [10] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/es/translations.json i18n/es/translations.json application/json 2026-04-26 12:31:40.997 - info: host.raspberrypi iobroker npm-install: upload [9] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/fr/translations.json i18n/fr/translations.json application/json 2026-04-26 12:31:41.003 - info: host.raspberrypi iobroker npm-install: upload [8] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/it/translations.json i18n/it/translations.json application/json 2026-04-26 12:31:41.010 - info: host.raspberrypi iobroker npm-install: upload [7] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/nl/translations.json i18n/nl/translations.json application/json 2026-04-26 12:31:41.014 - info: host.raspberrypi iobroker npm-install: upload [6] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/pl/translations.json i18n/pl/translations.json application/json 2026-04-26 12:31:41.018 - info: host.raspberrypi iobroker npm-install: upload [5] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/pt/translations.json i18n/pt/translations.json application/json 2026-04-26 12:31:41.022 - info: host.raspberrypi iobroker npm-install: upload [4] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/ru/translations.json i18n/ru/translations.json application/json 2026-04-26 12:31:41.029 - info: host.raspberrypi iobroker npm-install: upload [3] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/uk/translations.json i18n/uk/translations.json application/json 2026-04-26 12:31:41.039 - info: host.raspberrypi iobroker npm-install: upload [2] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json 2026-04-26 12:31:41.042 - info: host.raspberrypi iobroker npm-install: upload [1] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/jsonConfig.json jsonConfig.json application/json 2026-04-26 12:31:41.046 - info: host.raspberrypi iobroker npm-install: upload [0] webcal.admin /opt/iobroker/node_modules/iobroker.webcal/admin/webcal.png webcal.png image/png 2026-04-26 12:31:41.088 - info: host.raspberrypi iobroker npm-install: host.raspberrypi object system.adapter.webcal created/updated 2026-04-26 12:31:41.089 - info: host.raspberrypi iobroker npm-install: Updating objects from io-package.json for adapter "webcal" with version "1.4.0" 2026-04-26 12:31:42.017 - info: discovery.0 (8424) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v22.22.2, js-controller: 7.0.7 2026-04-26 12:31:42.179 - info: host.raspberrypi iobroker npm-install: exit 0============ Mark until here for C&P =============
iob diag has finished.
jvfle@raspberrypi:~ $
Adapter "ws" : 4.0.0 , installed 3.0.19 [Updatable]
Updaten.
Du hast den Desktop ja jetzt doch ausgeschaltet. Wolltest du den nicht wegen Tatsch-Skiehn laufen lassen?
-
Du hast den Desktop ja jetzt doch ausgeschaltet. Wolltest du den nicht wegen Tatsch-Skiehn laufen lassen?
Ich antworte dir gerade daran. Der "Tatsch-Skiehn" ist für mein Vorhaben ein muss. Bin auch eher old school visuell veranlagt.
Update mache ich.
-
Du hast den Desktop ja jetzt doch ausgeschaltet. Wolltest du den nicht wegen Tatsch-Skiehn laufen lassen?
Ich antworte dir gerade daran. Der "Tatsch-Skiehn" ist für mein Vorhaben ein muss. Bin auch eher old school visuell veranlagt.
Update mache ich.
Deswegen wunder ich mich ja...
Hier schaltest du den Desktop-Betrieb ja aus und stellst auf multi-user um:Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) New boot target is multi-user now! The system needs to be restarted. Please restart the fixer afterwards. Removed '/etc/systemd/system/default.target'. Created symlink '/etc/systemd/system/default.target' → '/usr/lib/systemd/system/multi-user.target'. -
Mh, naja, ich bin der einzige user. Ich weiß nicht, wie das geändert werden kann. Ich habe mich auch ehrlich gesagt, noch nicht damit beschäftigt, da es im Moment nicht gerade meine Priorität hatte.
Mh, naja, ich bin der einzige user.
Nein, auf einem Linux-System bist du niemals ein einziger user.
Mit z. B.cat /etc/passwdsiehst du die ganzen auf deinem System angelegten user. Und die haben auch alle eigene Berechtigungen.
Und genau deswegen funktioniert auch stumpfes hin- und herkopieren von Dateien NICHT. Insbesondere nicht mit graphischen Filemanagern. Die können nämlich die Rechte nur sehr eingeschränkt berücksichtigen. Das führt dann zu solch schrägen Konstellationen wie bei dir. -
Das war mir nicht bewusst. Wieder etwas dazu gelernt. Benutze sonst nur Windows. Erst als ich eine spezielle Software für mein Vorhaben gesucht hatte, bin ich auf ioBroker gestoßen und war über die Möglichkeiten sofort begeistert.
Deine Kaffeekasse habe ich gefunden. Erst einmal vielen, vielen Dank und einen schönen Sonntag.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden573
Online32.8k
Benutzer82.8k
Themen1.3m
Beiträge