RPI 2 V2.4 läßt sich nicht installieren
-
Hallo, auf meinem Raspi Pi5 ist aktuell Node js v22,21.0 und npm v11.62. Bei der Installation bekomme ich folgende Ausgabe.
$ iobroker add rpi2 --host rasppi5 Installing iobroker.rpi2@2.4.0... (System call) npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build'npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build'npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’npm error 14 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~npm error | gpiod::linenpm error In file included from /usr/include/gpiodcxx/chip.hpp:21,npm error from /usr/include/gpiod.hpp:27,npm error from ../cpp/opengpio.cpp:3:npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not capturednpm error 30 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-defaultnpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not capturednpm error 34 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-defaultnpm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’npm error 49 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not capturednpm error 66 | line.set_value(value); });npm error | ^~~~npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-defaultnpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not capturednpm error 69 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-defaultnpm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 81 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’npm error 92 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not capturednpm error 111 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-defaultnpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’npm error 115 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’npm error 127 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not capturednpm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1));npm error | ^~~~npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-defaultnpm error 124 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?npm error 134 | gpiod::line_event event = line.event_read();npm error | ^~~~~~~~~~npm error | info_eventnpm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~npm error | serventnpm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declarednpm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~~~~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’npm error 147 | data->line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 168 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’npm error 196 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’npm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 213 | data->line = line;npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’npm error 224 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not capturednpm error 264 | line.set_value(true);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not capturednpm error 278 | line.set_value(false);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’npm error 327 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not capturednpm error 328 | line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-defaultnpm error 324 | [](uv_work_t *req, int status)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)npm error gyp ERR! System Linux 6.12.47+rpt-rpi-2712npm error gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpionpm error gyp ERR! node -v v22.21.0npm error gyp ERR! node-gyp -v v11.4.2npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-22T11_44_39_541Z-debug-0.log host.raspberrypi5 Cannot install iobroker.rpi2@2.4.0: 1 ERROR: Process exited with code 25wie ich lese ist wohl ein falsches npm? wie installiere ich ein passendes npm? Oder fehlt mir sonst noch was?
Danke im Voraus.
-
Hallo, auf meinem Raspi Pi5 ist aktuell Node js v22,21.0 und npm v11.62. Bei der Installation bekomme ich folgende Ausgabe.
$ iobroker add rpi2 --host rasppi5 Installing iobroker.rpi2@2.4.0... (System call) npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build'npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build'npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’npm error 14 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~npm error | gpiod::linenpm error In file included from /usr/include/gpiodcxx/chip.hpp:21,npm error from /usr/include/gpiod.hpp:27,npm error from ../cpp/opengpio.cpp:3:npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not capturednpm error 30 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-defaultnpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not capturednpm error 34 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-defaultnpm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’npm error 49 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not capturednpm error 66 | line.set_value(value); });npm error | ^~~~npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-defaultnpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not capturednpm error 69 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-defaultnpm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 81 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’npm error 92 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not capturednpm error 111 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-defaultnpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’npm error 115 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’npm error 127 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not capturednpm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1));npm error | ^~~~npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-defaultnpm error 124 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?npm error 134 | gpiod::line_event event = line.event_read();npm error | ^~~~~~~~~~npm error | info_eventnpm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~npm error | serventnpm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declarednpm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~~~~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’npm error 147 | data->line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 168 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’npm error 196 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’npm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 213 | data->line = line;npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’npm error 224 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not capturednpm error 264 | line.set_value(true);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not capturednpm error 278 | line.set_value(false);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’npm error 327 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not capturednpm error 328 | line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-defaultnpm error 324 | [](uv_work_t *req, int status)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)npm error gyp ERR! System Linux 6.12.47+rpt-rpi-2712npm error gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpionpm error gyp ERR! node -v v22.21.0npm error gyp ERR! node-gyp -v v11.4.2npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-22T11_44_39_541Z-debug-0.log host.raspberrypi5 Cannot install iobroker.rpi2@2.4.0: 1 ERROR: Process exited with code 25wie ich lese ist wohl ein falsches npm? wie installiere ich ein passendes npm? Oder fehlt mir sonst noch was?
Danke im Voraus.
RaspberryOS 13 Trixie am Start?
Falls ja, dann versuch mal diesen Fork via GitHub/URL einzuspielen: -
RaspberryOS 13 Trixie am Start?
Falls ja, dann versuch mal diesen Fork via GitHub/URL einzuspielen:@thomas-braun Vielen Dank. Es hat unktioniert.
-
@airjk
Den Fork habe ich gelöscht, die Änderungen sind wieder im Hauptzweig.
Also ganz normal installieren. -
Hat bei mir leider nicht funktioniert mit der aktuellen Installation. Ich habe genau dieselbe Fehlermeldung erhalten und weiß nicht, was da nicht zusammen passt.
-
Hat bei mir leider nicht funktioniert mit der aktuellen Installation. Ich habe genau dieselbe Fehlermeldung erhalten und weiß nicht, was da nicht zusammen passt.
Hat bei mir leider nicht funktioniert mit der aktuellen Installation. Ich habe genau dieselbe Fehlermeldung erhalten und weiß nicht, was da nicht zusammen passt.
Welche Version hast du versucht auf welcher Hardware / OS zu installieren?
Debian Trixie braucht version 3.0.0
https://github.com/iobroker-community-adapters/ioBroker.rpi2?tab=readme-ov-file#300-2025-11-28 -
Hat bei mir leider nicht funktioniert mit der aktuellen Installation. Ich habe genau dieselbe Fehlermeldung erhalten und weiß nicht, was da nicht zusammen passt.
-
========== Start marking the full check here ===========
Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) ========== Start marking the full check here =========== ```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 16:12:18 up 1 day, 4:59, 1 user, load average: 0.40, 0.25, 0.22 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2026-04-08 16:12:18 BST Universal time: Wed 2026-04-08 15:12:18 UTC RTC time: n/a Time zone: Europe/London (BST, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no Timezone is probably wrong. Please configure it with system admin tools or by running 'iobroker fix' *** Users and Groups *** User that called 'iob diag': jkuban HOME=/home/jkuban GROUPS=jkuban adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/jkuban GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 3.5G 980M 12M 3.9G 4.7G Swap: 2.1G 0B 2.1G Total: 10G 3.5G 3.1G Active iob-Instances: 35 7820 M total memory 3353 M used memory 3294 M active memory 3057 M inactive memory 934 M free memory 242 M buffer memory 3437 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 16:12:18 up 1 day, 4:59, 1 user, load average: 0.40, 0.25, 0.22 Tasks: 217 total, 1 running, 216 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.1 us, 2.1 sy, 0.0 ni, 95.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7820.7 total, 933.8 free, 3353.8 used, 3680.3 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 4466.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 1.6G 9.3M 1.6G 1% /run /dev/mmcblk0p2 ext4 15G 11G 3.4G 76% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 3.9G 2.6M 3.9G 1% /tmp /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 783M 8.0K 783M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Apr 7 11:12:39 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Tue Apr 7 11:12:39 2026] EXT4-fs (mmcblk0p2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none. [Tue Apr 7 11:12:42 2026] EXT4-fs (mmcblk0p2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.7G /var/ 462M /var/cache 456M /var/cache/apt 326M /var/cache/apt/archives 181M /var/lib Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 695M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.6G /opt/iobroker/iobroker-data/ 1.1G /opt/iobroker/iobroker-data/history 422M /opt/iobroker/iobroker-data/files 88M /opt/iobroker/iobroker-data/files/vis-2 77M /opt/iobroker/iobroker-data/files/vis The five largest files in iobroker-data are: 32M /opt/iobroker/iobroker-data/objects.jsonl 30M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 11M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js 9.8M /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D30CJHUD-if00-port0 /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D30CJHT1-if00-port0 No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 90129) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.deyeidc.0 : deyeidc : raspberrypi - enabled, port: 8899 + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled + system.adapter.growatt.0 : growatt : raspberrypi - enabled + system.adapter.ham.0 : ham : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.notification-manager.0 : notification-manager : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pushover.0 : pushover : raspberrypi - enabled + system.adapter.pvforecast.0 : pvforecast : raspberrypi - enabled + system.adapter.radar-trap.0 : radar-trap : raspberrypi - enabled system.adapter.schoolfree.0 : schoolfree : raspberrypi - enabled system.adapter.schoolfree.1 : schoolfree : raspberrypi - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + system.adapter.smartmeter.1 : smartmeter : raspberrypi - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled system.adapter.telegram.0 : telegram : raspberrypi - disabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled + system.adapter.tvprogram.0 : tvprogram : raspberrypi - enabled system.adapter.vis-2-widgets-radar-trap.0: vis-2-widgets-radar-trap: raspberrypi - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deyeidc.0 : deyeidc : raspberrypi - enabled, port: 8899 + system.adapter.jarvis.0 : jarvis : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deyeidc" : 0.3.1 , installed 0.3.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "energiefluss" : 3.6.2 , installed 3.6.2 Adapter "energiefluss-erweitert": 0.8.1, installed 0.8.1 Adapter "growatt" : 3.3.1 , installed 3.3.1 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.19.7 , installed 1.19.7 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "lgtv" : 2.5.0 , installed 2.5.0 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "pvforecast" : 5.1.0 , installed 5.1.0 Adapter "radar-trap" : 2.2.2 , installed 2.2.2 Adapter "schoolfree" : 1.1.13 , installed 1.1.13 Adapter "shuttercontrol": 2.0.12 , installed 2.0.12 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "tvprogram" : 4.0.2 , installed 4.0.2 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.8 , installed 2.13.8 Adapter "vis-2-widgets-radar-trap": 2.3.0, installed 2.3.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "worx" : 3.2.7 , installed 3.2.7 Adapter "ws" : 4.0.0 , installed 4.0.0 Objects and States Please stand by - This may take a while Objects: 8452 States: 7171 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian-security trixie-security InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending systemupdates: 3 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 104735 15060/io.mqtt.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 102889 14679/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 103491 14679/iobroker.js-c tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 107098 15503/io.jarvis.0 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 5251 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7479 878/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 103594 14699/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 104406 15357/io.web.0 tcp6 0 0 :::3040 :::* LISTEN 1001 108550 15611/io.radar-trap tcp6 0 0 :::111 :::* LISTEN 0 5252 1/init tcp6 0 0 :::22 :::* LISTEN 0 7489 878/sshd: /usr/sbin udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 104992 15239/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 104993 15239/io.tuya.0 udp 0 0 0.0.0.0:56914 0.0.0.0:* 101 7285 648/avahi-daemon: r udp 0 0 0.0.0.0:111 0.0.0.0:* 0 1294 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 104112 15003/io.ham.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 7283 648/avahi-daemon: r udp6 0 0 :::52892 :::* 101 7286 648/avahi-daemon: r udp6 0 0 :::111 :::* 0 1295 1/init udp6 0 0 fe80::d4c1:6673:215:546 :::* 0 7543 684/NetworkManager udp6 0 0 :::5353 :::* 101 7284 648/avahi-daemon: r -
iob install rpi2 NPM version: 10.9.7 Installing iobroker.rpi2@2.4.0... (System call) npm error code 1 npm error path /opt/iobroker/node_modules/opengpio npm error command failed npm error command sh -c node-gyp rebuild npm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build' npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.o npm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build' npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’ npm error 14 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0}); npm error | ^~~~ npm error | gpiod::line npm error In file included from /usr/include/gpiodcxx/chip.hpp:21, npm error from /usr/include/gpiod.hpp:27, npm error from ../cpp/opengpio.cpp:3: npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’ npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0}); npm error | ^~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not captured npm error 30 | bool value = line.get_value(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-default npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not captured npm error 34 | { line.release(); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-default npm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’ npm error 49 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’ npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not captured npm error 66 | line.set_value(value); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-default npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not captured npm error 69 | { line.release(); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-default npm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: At global scope: npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a type npm error 81 | gpiod::line line; npm error | ^~~~ npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’ npm error 92 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’ npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not captured npm error 111 | bool value = line.get_value(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-default npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’ npm error 115 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’ npm error 127 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not captured npm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1)); npm error | ^~~~ npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-default npm error 124 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’? npm error 134 | gpiod::line_event event = line.event_read(); npm error | ^~~~~~~~~~ npm error | info_event npm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’? npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false; npm error | ^~~~~ npm error | servent npm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declared npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false; npm error | ^~~~~~~~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’ npm error 147 | data->line.release(); npm error | ^~~~ npm error ../cpp/opengpio.cpp: At global scope: npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a type npm error 168 | gpiod::line line; npm error | ^~~~ npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’ npm error 196 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’ npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’ npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 213 | data->line = line; npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’ npm error 224 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not captured npm error 264 | line.set_value(true); npm error | ^~~~ npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default npm error 221 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not captured npm error 278 | line.set_value(false); npm error | ^~~~ npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default npm error 221 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’ npm error 327 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not captured npm error 328 | line.release(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-default npm error 324 | [](uv_work_t *req, int status) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1 npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2 npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23) npm error gyp ERR! System Linux 6.12.75+rpt-rpi-v8 npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpio npm error gyp ERR! node -v v22.22.2 npm error gyp ERR! node-gyp -v v11.5.0 npm error gyp ERR! not ok npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-04-08T15_15_18_417Z-debug-0.log host.raspberrypi Cannot install iobroker.rpi2@2.4.0: 1MOD-EDIT: Code in code-tags gesetzt!
-
========== Start marking the full check here ===========
Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) ========== Start marking the full check here =========== ```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 16:12:18 up 1 day, 4:59, 1 user, load average: 0.40, 0.25, 0.22 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2026-04-08 16:12:18 BST Universal time: Wed 2026-04-08 15:12:18 UTC RTC time: n/a Time zone: Europe/London (BST, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no Timezone is probably wrong. Please configure it with system admin tools or by running 'iobroker fix' *** Users and Groups *** User that called 'iob diag': jkuban HOME=/home/jkuban GROUPS=jkuban adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/jkuban GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 3.5G 980M 12M 3.9G 4.7G Swap: 2.1G 0B 2.1G Total: 10G 3.5G 3.1G Active iob-Instances: 35 7820 M total memory 3353 M used memory 3294 M active memory 3057 M inactive memory 934 M free memory 242 M buffer memory 3437 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 16:12:18 up 1 day, 4:59, 1 user, load average: 0.40, 0.25, 0.22 Tasks: 217 total, 1 running, 216 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.1 us, 2.1 sy, 0.0 ni, 95.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7820.7 total, 933.8 free, 3353.8 used, 3680.3 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 4466.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 1.6G 9.3M 1.6G 1% /run /dev/mmcblk0p2 ext4 15G 11G 3.4G 76% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 3.9G 2.6M 3.9G 1% /tmp /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 783M 8.0K 783M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Apr 7 11:12:39 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Tue Apr 7 11:12:39 2026] EXT4-fs (mmcblk0p2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none. [Tue Apr 7 11:12:42 2026] EXT4-fs (mmcblk0p2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.7G /var/ 462M /var/cache 456M /var/cache/apt 326M /var/cache/apt/archives 181M /var/lib Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 695M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.6G /opt/iobroker/iobroker-data/ 1.1G /opt/iobroker/iobroker-data/history 422M /opt/iobroker/iobroker-data/files 88M /opt/iobroker/iobroker-data/files/vis-2 77M /opt/iobroker/iobroker-data/files/vis The five largest files in iobroker-data are: 32M /opt/iobroker/iobroker-data/objects.jsonl 30M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 11M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js 9.8M /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D30CJHUD-if00-port0 /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D30CJHT1-if00-port0 No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 90129) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.deyeidc.0 : deyeidc : raspberrypi - enabled, port: 8899 + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled + system.adapter.growatt.0 : growatt : raspberrypi - enabled + system.adapter.ham.0 : ham : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.notification-manager.0 : notification-manager : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pushover.0 : pushover : raspberrypi - enabled + system.adapter.pvforecast.0 : pvforecast : raspberrypi - enabled + system.adapter.radar-trap.0 : radar-trap : raspberrypi - enabled system.adapter.schoolfree.0 : schoolfree : raspberrypi - enabled system.adapter.schoolfree.1 : schoolfree : raspberrypi - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + system.adapter.smartmeter.1 : smartmeter : raspberrypi - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled system.adapter.telegram.0 : telegram : raspberrypi - disabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled + system.adapter.tvprogram.0 : tvprogram : raspberrypi - enabled system.adapter.vis-2-widgets-radar-trap.0: vis-2-widgets-radar-trap: raspberrypi - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deyeidc.0 : deyeidc : raspberrypi - enabled, port: 8899 + system.adapter.jarvis.0 : jarvis : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deyeidc" : 0.3.1 , installed 0.3.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "energiefluss" : 3.6.2 , installed 3.6.2 Adapter "energiefluss-erweitert": 0.8.1, installed 0.8.1 Adapter "growatt" : 3.3.1 , installed 3.3.1 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.19.7 , installed 1.19.7 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "lgtv" : 2.5.0 , installed 2.5.0 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "pvforecast" : 5.1.0 , installed 5.1.0 Adapter "radar-trap" : 2.2.2 , installed 2.2.2 Adapter "schoolfree" : 1.1.13 , installed 1.1.13 Adapter "shuttercontrol": 2.0.12 , installed 2.0.12 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "tvprogram" : 4.0.2 , installed 4.0.2 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.8 , installed 2.13.8 Adapter "vis-2-widgets-radar-trap": 2.3.0, installed 2.3.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "worx" : 3.2.7 , installed 3.2.7 Adapter "ws" : 4.0.0 , installed 4.0.0 Objects and States Please stand by - This may take a while Objects: 8452 States: 7171 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian-security trixie-security InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending systemupdates: 3 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 104735 15060/io.mqtt.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 102889 14679/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 103491 14679/iobroker.js-c tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 107098 15503/io.jarvis.0 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 5251 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7479 878/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 103594 14699/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 104406 15357/io.web.0 tcp6 0 0 :::3040 :::* LISTEN 1001 108550 15611/io.radar-trap tcp6 0 0 :::111 :::* LISTEN 0 5252 1/init tcp6 0 0 :::22 :::* LISTEN 0 7489 878/sshd: /usr/sbin udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 104992 15239/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 104993 15239/io.tuya.0 udp 0 0 0.0.0.0:56914 0.0.0.0:* 101 7285 648/avahi-daemon: r udp 0 0 0.0.0.0:111 0.0.0.0:* 0 1294 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 104112 15003/io.ham.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 7283 648/avahi-daemon: r udp6 0 0 :::52892 :::* 101 7286 648/avahi-daemon: r udp6 0 0 :::111 :::* 0 1295 1/init udp6 0 0 fe80::d4c1:6673:215:546 :::* 0 7543 684/NetworkManager udp6 0 0 :::5353 :::* 101 7284 648/avahi-daemon: r -
iob install rpi2 NPM version: 10.9.7 Installing iobroker.rpi2@2.4.0... (System call) npm error code 1 npm error path /opt/iobroker/node_modules/opengpio npm error command failed npm error command sh -c node-gyp rebuild npm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build' npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.o npm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build' npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’ npm error 14 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0}); npm error | ^~~~ npm error | gpiod::line npm error In file included from /usr/include/gpiodcxx/chip.hpp:21, npm error from /usr/include/gpiod.hpp:27, npm error from ../cpp/opengpio.cpp:3: npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’ npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0}); npm error | ^~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not captured npm error 30 | bool value = line.get_value(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-default npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not captured npm error 34 | { line.release(); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-default npm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’ npm error 49 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’ npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not captured npm error 66 | line.set_value(value); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-default npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not captured npm error 69 | { line.release(); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-default npm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: At global scope: npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a type npm error 81 | gpiod::line line; npm error | ^~~~ npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’ npm error 92 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’ npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not captured npm error 111 | bool value = line.get_value(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-default npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’ npm error 115 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’ npm error 127 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not captured npm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1)); npm error | ^~~~ npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-default npm error 124 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’? npm error 134 | gpiod::line_event event = line.event_read(); npm error | ^~~~~~~~~~ npm error | info_event npm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’? npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false; npm error | ^~~~~ npm error | servent npm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declared npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false; npm error | ^~~~~~~~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’ npm error 147 | data->line.release(); npm error | ^~~~ npm error ../cpp/opengpio.cpp: At global scope: npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a type npm error 168 | gpiod::line line; npm error | ^~~~ npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’ npm error 196 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’ npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’ npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 213 | data->line = line; npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’ npm error 224 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not captured npm error 264 | line.set_value(true); npm error | ^~~~ npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default npm error 221 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not captured npm error 278 | line.set_value(false); npm error | ^~~~ npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default npm error 221 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’ npm error 327 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not captured npm error 328 | line.release(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-default npm error 324 | [](uv_work_t *req, int status) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1 npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2 npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23) npm error gyp ERR! System Linux 6.12.75+rpt-rpi-v8 npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpio npm error gyp ERR! node -v v22.22.2 npm error gyp ERR! node-gyp -v v11.5.0 npm error gyp ERR! not ok npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-04-08T15_15_18_417Z-debug-0.log host.raspberrypi Cannot install iobroker.rpi2@2.4.0: 1MOD-EDIT: Code in code-tags gesetzt!
-
iob install rpi2 NPM version: 10.9.7 Installing iobroker.rpi2@2.4.0... (System call) npm error code 1 npm error path /opt/iobroker/node_modules/opengpio npm error command failed npm error command sh -c node-gyp rebuild npm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build' npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.o npm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build' npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’ npm error 14 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0}); npm error | ^~~~ npm error | gpiod::line npm error In file included from /usr/include/gpiodcxx/chip.hpp:21, npm error from /usr/include/gpiod.hpp:27, npm error from ../cpp/opengpio.cpp:3: npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’ npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0}); npm error | ^~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not captured npm error 30 | bool value = line.get_value(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-default npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not captured npm error 34 | { line.release(); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-default npm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’ npm error 49 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’ npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not captured npm error 66 | line.set_value(value); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-default npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not captured npm error 69 | { line.release(); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-default npm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: At global scope: npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a type npm error 81 | gpiod::line line; npm error | ^~~~ npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’ npm error 92 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’ npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not captured npm error 111 | bool value = line.get_value(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-default npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’ npm error 115 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’ npm error 127 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not captured npm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1)); npm error | ^~~~ npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-default npm error 124 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’? npm error 134 | gpiod::line_event event = line.event_read(); npm error | ^~~~~~~~~~ npm error | info_event npm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’? npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false; npm error | ^~~~~ npm error | servent npm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declared npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false; npm error | ^~~~~~~~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’ npm error 147 | data->line.release(); npm error | ^~~~ npm error ../cpp/opengpio.cpp: At global scope: npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a type npm error 168 | gpiod::line line; npm error | ^~~~ npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’ npm error 196 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’ npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’ npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 213 | data->line = line; npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’ npm error 224 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not captured npm error 264 | line.set_value(true); npm error | ^~~~ npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default npm error 221 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not captured npm error 278 | line.set_value(false); npm error | ^~~~ npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default npm error 221 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’ npm error 327 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not captured npm error 328 | line.release(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-default npm error 324 | [](uv_work_t *req, int status) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1 npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2 npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23) npm error gyp ERR! System Linux 6.12.75+rpt-rpi-v8 npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpio npm error gyp ERR! node -v v22.22.2 npm error gyp ERR! node-gyp -v v11.5.0 npm error gyp ERR! not ok npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-04-08T15_15_18_417Z-debug-0.log host.raspberrypi Cannot install iobroker.rpi2@2.4.0: 1MOD-EDIT: Code in code-tags gesetzt!
Die Zeitzone richtig setzen.
Installier die Beta-Version des Adapters.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden623
Online32.8k
Benutzer82.7k
Themen1.3m
Beiträge