- ioBroker Community Home
- Deutsch
- ioBroker Allgemein
- [verschoben -> github] Emporia Adapter: Logging ausschalten
[verschoben -> github] Emporia Adapter: Logging ausschalten
-
Hallo Forums-Spezialisten,
seit kurzem habe ich das Set des Emporia Energy Monitors VUE Gen-3 im Einsatz. Das Set mit seinen 16 Stromsensoren wäre ja recht praktisch. Nach Installation des Emporia Energy Adapter im IOB fiel mir auf, dass das Logging im Adapter nicht ausgeschaltet werden kann. In der Instanz des Adapters kann man ja nur Benutzername, Kennwort und 3 Optionen angeben.
Übersehe ich da etwas oder kann man das tatsächlich nur durch die Protokollstufe "warn" ausblenden?
Version des IOB: v7.6.3
Version des Emporia Energy Adapters: v0.1.0
Firmware des Emporia Adapters: Vue3-726Vorweg danke für eure Hinweise!
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 22.02 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 0.00 Watt
2025-05-22 13:57:41.218 - info: emporia.0 (3840) device:- channel:Main usage: 168.14 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 58.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 19.70 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Vorraum usage: 62.41 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.95 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.09 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Main usage: 164.05 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 54.70 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 20.29 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Vorraum usage: 60.77 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.99 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.30 Wattiob diag
*** BASE SYSTEM ***
Static hostname: raspberrypi
Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
Kernel: Linux 6.12.25+rpt-rpi-2712
Architecture: arm64
OS is similar to:Model : Raspberry Pi 5 Model B Rev 1.1
Docker : false
Virtualization : none
Kernel : aarch64
Userland : 64 bitSystemuptime and Load:
13:57:22 up 17:07, 2 users, load average: 0.28, 0.25, 0.11
CPU threads: 4*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.Previously detected issues:
No throttling issues detected.*** TIME AND TIMEZONES ***
Local time: Thu 2025-05-22 13:57:22 CEST
Universal time: Thu 2025-05-22 11:57:22 UTC
RTC time: Thu 2025-05-22 11:57:22
Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobrokerUser that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal: tty*** MEMORY ***
total used free shared buff/cache available
Mem: 17G 2.3G 13G 7.6M 1.4G 14G
Swap: 536M 0B 536M
Total: 17G 2.3G 13GActive iob-Instances: 16
16219 M total memory 2173 M used memory 1960 M active memory 1083 M inactive memory 12811 M free memory 129 M buffer memory 1227 M swap cache 511 M total swap 0 M used swap 511 M free swap*** top - Table Of Processes ***
top - 13:57:22 up 17:07, 2 users, load average: 0.28, 0.25, 0.11
Tasks: 204 total, 2 running, 202 sleeping, 0 stopped, 0 zombie
%Cpu(s): 25.0 us, 25.0 sy, 0.0 ni, 25.0 id, 25.0 wa, 0.0 hi, 0.0 si, 0.0 st
MiB Mem : 16219.7 total, 12811.3 free, 2173.6 used, 1356.7 buff/cache
MiB Swap: 512.0 total, 512.0 free, 0.0 used. 14046.0 avail Mem*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.*** DMESG CRITICAL ERRORS ***
No critical errors detected*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.9G 0 7.9G 0% /dev
tmpfs tmpfs 1.6G 7.3M 1.6G 1% /run
/dev/mmcblk0p2 ext4 15G 12G 2.0G 86% /
tmpfs tmpfs 8.0G 0 8.0G 0% /dev/shm
tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock
/dev/mmcblk0p1 vfat 510M 56M 455M 11% /boot/firmware
tmpfs tmpfs 1.6G 0 1.6G 0% /run/user/1000Messages concerning ext4 filesystem in dmesg:
[Wed May 21 20:49:59 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:C6:D1:C2 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=46767ad0-02 rootfstype=ext4 fsck.repair=yes rootwait
[Wed May 21 20:50:02 2025] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none.
[Wed May 21 20:50:03 2025] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none.Show mounted filesystems:
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-roFiles in neuralgic directories:
/var:
2.3G /var/
752M /var/log
751M /var/log/journal/ce49b5c207f74de48fc362bf23ca73ba
751M /var/log/journal
539M /var/libArchived and active journals take up 750.4M in the file system.
/opt/iobroker/backups:
228M /opt/iobroker/backups//opt/iobroker/iobroker-data:
1.2G /opt/iobroker/iobroker-data/files
1.2G /opt/iobroker/iobroker-data/
617M /opt/iobroker/iobroker-data/files/javascript.admin
560M /opt/iobroker/iobroker-data/files/javascript.admin/static
558M /opt/iobroker/iobroker-data/files/javascript.admin/static/jsThe five largest files in iobroker-data are:
26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.mapUSB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':No Devices found 'by-id'
Zigbee Network Settings on your coordinator/in nvbackup are:
zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***To unmask the settings run 'iob diag --unmask'
*** NodeJS-Installation ***
/usr/bin/nodejs v20.19.2
/usr/bin/node v20.19.2
/usr/bin/npm 10.8.2
/usr/bin/npx 10.8.2
/usr/bin/corepack 0.31.0nodejs:
Installed: 20.19.2-1nodesource1
Candidate: 20.19.2-1nodesource1
Version table:
*** 20.19.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
100 /var/lib/dpkg/status
20.19.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.19.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.3-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.17.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.16.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.15.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.15.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.14.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.13.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.13.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.11.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.11.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.10.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.9.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.7.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.4.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.2.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.1.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.0.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
18.19.0+dfsg-6~deb12u2 500
500 http://deb.debian.org/debian bookworm/main arm64 Packages
18.19.0+dfsg-6~deb12u1 500
500 http://deb.debian.org/debian-security bookworm-security/main arm64 PackagesTemp directories causing deletion problem: 0
No problems detectedErrors in npm tree: 0
No problems detected*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.Objects type: jsonl
States type: jsonlHosts:
raspberrypi raspberrypi (version: 7.0.6, hostname: raspberrypi , alive, uptime: 61625)Core adapters versions
js-controller: 7.0.6
admin: 7.6.3
javascript: 8.8.3nodejs modules from github: 0
Adapter State
-
system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
-
system.adapter.backitup.0 : backitup : raspberrypi - enabled
-
system.adapter.echarts.0 : echarts : raspberrypi - enabled
-
system.adapter.email.0 : email : raspberrypi - enabled
-
system.adapter.emporia.0 : emporia : raspberrypi - enabled
-
system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled
system.adapter.flot.0 : flot : raspberrypi - enabled -
system.adapter.javascript.0 : javascript : raspberrypi - enabled
-
system.adapter.javascript.1 : javascript : raspberrypi - enabled
-
system.adapter.kecontact.0 : kecontact : raspberrypi - enabled
-
system.adapter.modbus.0 : modbus : raspberrypi - enabled
system.adapter.modbus.1 : modbus : raspberrypi - disabled -
system.adapter.modbus.2 : modbus : raspberrypi - enabled
-
system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100
-
system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306
system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi - disabled
system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - enabled
system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - disabled
system.adapter.vis-2-widgets-weather-and-heating.0: vis-2-widgets-weather-and-heating: raspberrypi - disabled -
system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled
system.adapter.vis-history.0 : vis-history : raspberrypi - enabled
system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - enabled
system.adapter.vis.0 : vis : raspberrypi - disabled -
system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin
-
instance is alive
Enabled adapters with bindings
- system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
- system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100
- system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306
- system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin
ioBroker-Repositories
┌─────────┬──────────┬──────────────────────────────────────────────────┬──────────────┐
│ (index) │ name │ url │ auto upgrade │
├─────────┼──────────┼──────────────────────────────────────────────────┼──────────────┤
│ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │
└─────────┴──────────┴──────────────────────────────────────────────────┴──────────────┘Active repo(s): stable
Upgrade policy: minorInstalled ioBroker-Adapters
Used repository: stable
Adapter "admin" : 7.6.3 , installed 7.6.3
Adapter "backitup" : 3.0.31 , installed 3.0.31
Adapter "echarts" : 1.9.2 , installed 1.9.2
Adapter "email" : 2.0.4 , installed 2.0.4
Adapter "emporia" : 0.0.12 , installed 0.1.0
Adapter "energiefluss" : 3.6.2 , installed 3.6.2
Adapter "flot" : 1.12.0 , installed 1.12.0
Adapter "javascript" : 8.8.3 , installed 8.8.3
Controller "js-controller": 7.0.6 , installed 7.0.6
Adapter "kecontact" : 3.1.0 , installed 3.1.0
Adapter "modbus" : 6.3.2 , installed 6.3.2
Adapter "shelly" : 9.2.0 , installed 9.5.0-alpha.1
Adapter "socketio" : 6.7.1 , installed 6.7.1
Adapter "sql" : 3.0.1 , installed 3.0.1
Adapter "vis" : 1.5.6 , installed 1.5.6
Adapter "vis-2" : 2.9.64 , installed 2.9.64
Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2
Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.1.0
Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10
Adapter "vis-2-widgets-weather-and-heating": 0.10.4, installed 0.10.4
Adapter "vis-history" : 1.0.0 , installed 1.0.0
Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
Adapter "web" : 7.0.8 , installed 7.0.8
Adapter "ws" : 2.6.2 , installed 2.6.2Objects and States
Please stand by - This may take a while
Objects: 2007
States: 1645*** OS-Repositories and Updates ***
W: http://raspbian.piduino.org/dists/stretch/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 http://raspbian.piduino.org stretch InRelease
Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
W: http://raspbian.piduino.org/dists/stretch/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Pending Updates: 0*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 192.168.0.100:1882 0.0.0.0:* LISTEN 1001 5764 1103/io.shelly.0
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6354 699/sshd: /usr/sbin
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 878 882/smbd
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 877 882/smbd
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 901 679/iobroker.js-con
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 893 679/iobroker.js-con
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 106 6410 758/mariadbd
tcp6 0 0 :::8081 :::* LISTEN 1001 5478 894/io.admin.0
tcp6 0 0 :::8082 :::* LISTEN 1001 342453 4247/io.web.0
tcp6 0 0 :::22 :::* LISTEN 0 6356 699/sshd: /usr/sbin
tcp6 0 0 :::139 :::* LISTEN 0 876 882/smbd
tcp6 0 0 :::445 :::* LISTEN 0 875 882/smbd
udp 0 0 0.0.0.0:60881 0.0.0.0:* 104 7223 564/avahi-daemon: r
udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7221 564/avahi-daemon: r
udp 0 0 0.0.0.0:7090 0.0.0.0:* 1001 7865 1055/io.kecontact.0
udp 0 0 0.0.0.0:7092 0.0.0.0:* 1001 7866 1055/io.kecontact.0
udp 0 0 192.168.0.255:137 0.0.0.0:* 0 6524 878/nmbd
udp 0 0 192.168.0.100:137 0.0.0.0:* 0 6523 878/nmbd
udp 0 0 0.0.0.0:137 0.0.0.0:* 0 6511 878/nmbd
udp 0 0 192.168.0.255:138 0.0.0.0:* 0 6526 878/nmbd
udp 0 0 192.168.0.100:138 0.0.0.0:* 0 6525 878/nmbd
udp 0 0 0.0.0.0:138 0.0.0.0:* 0 6512 878/nmbd
udp 0 0 0.0.0.0:43573 0.0.0.0:* 1001 8313 1055/io.kecontact.0
udp6 0 0 :::5353 :::* 104 7222 564/avahi-daemon: r
udp6 0 0 :::46779 :::* 104 7224 564/avahi-daemon: r
udp6 0 0 fe80::7de6:a76b:229:546 :::* 0 6566 644/NetworkManager*** Log File - Last 25 Lines ***
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 22.02 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 0.00 Watt
2025-05-22 13:57:41.218 - info: emporia.0 (3840) device:- channel:Main usage: 168.14 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 58.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 19.70 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Vorraum usage: 62.41 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.95 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.09 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Main usage: 164.05 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 54.70 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 20.29 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Vorraum usage: 60.77 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.99 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.30 Watt============ Mark until here for C&P ============= iob diag has finished. [/s] ISmart-Home-Automation unter IOB auf RASPI5, 16GB RAM, 50GB SSD, MariaSQL, VIS-2.
Anfang 2025 war ich Newbie in Sachen RaspBerry, Linux und IOB.
Jetzt läuft alles konstant gut und ich gebe gern meine Erfahrungen und mein Wissen an die Forums-User/Innen weiter.
Großes Danke an alle tatkräftigen Helfer im Forum! -
-
Hallo Forums-Spezialisten,
seit kurzem habe ich das Set des Emporia Energy Monitors VUE Gen-3 im Einsatz. Das Set mit seinen 16 Stromsensoren wäre ja recht praktisch. Nach Installation des Emporia Energy Adapter im IOB fiel mir auf, dass das Logging im Adapter nicht ausgeschaltet werden kann. In der Instanz des Adapters kann man ja nur Benutzername, Kennwort und 3 Optionen angeben.
Übersehe ich da etwas oder kann man das tatsächlich nur durch die Protokollstufe "warn" ausblenden?
Version des IOB: v7.6.3
Version des Emporia Energy Adapters: v0.1.0
Firmware des Emporia Adapters: Vue3-726Vorweg danke für eure Hinweise!
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 22.02 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 0.00 Watt
2025-05-22 13:57:41.218 - info: emporia.0 (3840) device:- channel:Main usage: 168.14 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 58.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 19.70 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Vorraum usage: 62.41 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.95 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.09 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Main usage: 164.05 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 54.70 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 20.29 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Vorraum usage: 60.77 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.99 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.30 Wattiob diag
*** BASE SYSTEM ***
Static hostname: raspberrypi
Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
Kernel: Linux 6.12.25+rpt-rpi-2712
Architecture: arm64
OS is similar to:Model : Raspberry Pi 5 Model B Rev 1.1
Docker : false
Virtualization : none
Kernel : aarch64
Userland : 64 bitSystemuptime and Load:
13:57:22 up 17:07, 2 users, load average: 0.28, 0.25, 0.11
CPU threads: 4*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.Previously detected issues:
No throttling issues detected.*** TIME AND TIMEZONES ***
Local time: Thu 2025-05-22 13:57:22 CEST
Universal time: Thu 2025-05-22 11:57:22 UTC
RTC time: Thu 2025-05-22 11:57:22
Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobrokerUser that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal: tty*** MEMORY ***
total used free shared buff/cache available
Mem: 17G 2.3G 13G 7.6M 1.4G 14G
Swap: 536M 0B 536M
Total: 17G 2.3G 13GActive iob-Instances: 16
16219 M total memory 2173 M used memory 1960 M active memory 1083 M inactive memory 12811 M free memory 129 M buffer memory 1227 M swap cache 511 M total swap 0 M used swap 511 M free swap*** top - Table Of Processes ***
top - 13:57:22 up 17:07, 2 users, load average: 0.28, 0.25, 0.11
Tasks: 204 total, 2 running, 202 sleeping, 0 stopped, 0 zombie
%Cpu(s): 25.0 us, 25.0 sy, 0.0 ni, 25.0 id, 25.0 wa, 0.0 hi, 0.0 si, 0.0 st
MiB Mem : 16219.7 total, 12811.3 free, 2173.6 used, 1356.7 buff/cache
MiB Swap: 512.0 total, 512.0 free, 0.0 used. 14046.0 avail Mem*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.*** DMESG CRITICAL ERRORS ***
No critical errors detected*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.9G 0 7.9G 0% /dev
tmpfs tmpfs 1.6G 7.3M 1.6G 1% /run
/dev/mmcblk0p2 ext4 15G 12G 2.0G 86% /
tmpfs tmpfs 8.0G 0 8.0G 0% /dev/shm
tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock
/dev/mmcblk0p1 vfat 510M 56M 455M 11% /boot/firmware
tmpfs tmpfs 1.6G 0 1.6G 0% /run/user/1000Messages concerning ext4 filesystem in dmesg:
[Wed May 21 20:49:59 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:C6:D1:C2 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=46767ad0-02 rootfstype=ext4 fsck.repair=yes rootwait
[Wed May 21 20:50:02 2025] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none.
[Wed May 21 20:50:03 2025] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none.Show mounted filesystems:
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-roFiles in neuralgic directories:
/var:
2.3G /var/
752M /var/log
751M /var/log/journal/ce49b5c207f74de48fc362bf23ca73ba
751M /var/log/journal
539M /var/libArchived and active journals take up 750.4M in the file system.
/opt/iobroker/backups:
228M /opt/iobroker/backups//opt/iobroker/iobroker-data:
1.2G /opt/iobroker/iobroker-data/files
1.2G /opt/iobroker/iobroker-data/
617M /opt/iobroker/iobroker-data/files/javascript.admin
560M /opt/iobroker/iobroker-data/files/javascript.admin/static
558M /opt/iobroker/iobroker-data/files/javascript.admin/static/jsThe five largest files in iobroker-data are:
26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.mapUSB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':No Devices found 'by-id'
Zigbee Network Settings on your coordinator/in nvbackup are:
zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***To unmask the settings run 'iob diag --unmask'
*** NodeJS-Installation ***
/usr/bin/nodejs v20.19.2
/usr/bin/node v20.19.2
/usr/bin/npm 10.8.2
/usr/bin/npx 10.8.2
/usr/bin/corepack 0.31.0nodejs:
Installed: 20.19.2-1nodesource1
Candidate: 20.19.2-1nodesource1
Version table:
*** 20.19.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
100 /var/lib/dpkg/status
20.19.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.19.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.3-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.17.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.16.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.15.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.15.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.14.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.13.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.13.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.11.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.11.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.10.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.9.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.7.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.4.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.2.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.1.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.0.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
18.19.0+dfsg-6~deb12u2 500
500 http://deb.debian.org/debian bookworm/main arm64 Packages
18.19.0+dfsg-6~deb12u1 500
500 http://deb.debian.org/debian-security bookworm-security/main arm64 PackagesTemp directories causing deletion problem: 0
No problems detectedErrors in npm tree: 0
No problems detected*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.Objects type: jsonl
States type: jsonlHosts:
raspberrypi raspberrypi (version: 7.0.6, hostname: raspberrypi , alive, uptime: 61625)Core adapters versions
js-controller: 7.0.6
admin: 7.6.3
javascript: 8.8.3nodejs modules from github: 0
Adapter State
-
system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
-
system.adapter.backitup.0 : backitup : raspberrypi - enabled
-
system.adapter.echarts.0 : echarts : raspberrypi - enabled
-
system.adapter.email.0 : email : raspberrypi - enabled
-
system.adapter.emporia.0 : emporia : raspberrypi - enabled
-
system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled
system.adapter.flot.0 : flot : raspberrypi - enabled -
system.adapter.javascript.0 : javascript : raspberrypi - enabled
-
system.adapter.javascript.1 : javascript : raspberrypi - enabled
-
system.adapter.kecontact.0 : kecontact : raspberrypi - enabled
-
system.adapter.modbus.0 : modbus : raspberrypi - enabled
system.adapter.modbus.1 : modbus : raspberrypi - disabled -
system.adapter.modbus.2 : modbus : raspberrypi - enabled
-
system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100
-
system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306
system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi - disabled
system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - enabled
system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - disabled
system.adapter.vis-2-widgets-weather-and-heating.0: vis-2-widgets-weather-and-heating: raspberrypi - disabled -
system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled
system.adapter.vis-history.0 : vis-history : raspberrypi - enabled
system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - enabled
system.adapter.vis.0 : vis : raspberrypi - disabled -
system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin
-
instance is alive
Enabled adapters with bindings
- system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
- system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100
- system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306
- system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin
ioBroker-Repositories
┌─────────┬──────────┬──────────────────────────────────────────────────┬──────────────┐
│ (index) │ name │ url │ auto upgrade │
├─────────┼──────────┼──────────────────────────────────────────────────┼──────────────┤
│ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │
└─────────┴──────────┴──────────────────────────────────────────────────┴──────────────┘Active repo(s): stable
Upgrade policy: minorInstalled ioBroker-Adapters
Used repository: stable
Adapter "admin" : 7.6.3 , installed 7.6.3
Adapter "backitup" : 3.0.31 , installed 3.0.31
Adapter "echarts" : 1.9.2 , installed 1.9.2
Adapter "email" : 2.0.4 , installed 2.0.4
Adapter "emporia" : 0.0.12 , installed 0.1.0
Adapter "energiefluss" : 3.6.2 , installed 3.6.2
Adapter "flot" : 1.12.0 , installed 1.12.0
Adapter "javascript" : 8.8.3 , installed 8.8.3
Controller "js-controller": 7.0.6 , installed 7.0.6
Adapter "kecontact" : 3.1.0 , installed 3.1.0
Adapter "modbus" : 6.3.2 , installed 6.3.2
Adapter "shelly" : 9.2.0 , installed 9.5.0-alpha.1
Adapter "socketio" : 6.7.1 , installed 6.7.1
Adapter "sql" : 3.0.1 , installed 3.0.1
Adapter "vis" : 1.5.6 , installed 1.5.6
Adapter "vis-2" : 2.9.64 , installed 2.9.64
Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2
Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.1.0
Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10
Adapter "vis-2-widgets-weather-and-heating": 0.10.4, installed 0.10.4
Adapter "vis-history" : 1.0.0 , installed 1.0.0
Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
Adapter "web" : 7.0.8 , installed 7.0.8
Adapter "ws" : 2.6.2 , installed 2.6.2Objects and States
Please stand by - This may take a while
Objects: 2007
States: 1645*** OS-Repositories and Updates ***
W: http://raspbian.piduino.org/dists/stretch/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 http://raspbian.piduino.org stretch InRelease
Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
W: http://raspbian.piduino.org/dists/stretch/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Pending Updates: 0*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 192.168.0.100:1882 0.0.0.0:* LISTEN 1001 5764 1103/io.shelly.0
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6354 699/sshd: /usr/sbin
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 878 882/smbd
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 877 882/smbd
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 901 679/iobroker.js-con
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 893 679/iobroker.js-con
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 106 6410 758/mariadbd
tcp6 0 0 :::8081 :::* LISTEN 1001 5478 894/io.admin.0
tcp6 0 0 :::8082 :::* LISTEN 1001 342453 4247/io.web.0
tcp6 0 0 :::22 :::* LISTEN 0 6356 699/sshd: /usr/sbin
tcp6 0 0 :::139 :::* LISTEN 0 876 882/smbd
tcp6 0 0 :::445 :::* LISTEN 0 875 882/smbd
udp 0 0 0.0.0.0:60881 0.0.0.0:* 104 7223 564/avahi-daemon: r
udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7221 564/avahi-daemon: r
udp 0 0 0.0.0.0:7090 0.0.0.0:* 1001 7865 1055/io.kecontact.0
udp 0 0 0.0.0.0:7092 0.0.0.0:* 1001 7866 1055/io.kecontact.0
udp 0 0 192.168.0.255:137 0.0.0.0:* 0 6524 878/nmbd
udp 0 0 192.168.0.100:137 0.0.0.0:* 0 6523 878/nmbd
udp 0 0 0.0.0.0:137 0.0.0.0:* 0 6511 878/nmbd
udp 0 0 192.168.0.255:138 0.0.0.0:* 0 6526 878/nmbd
udp 0 0 192.168.0.100:138 0.0.0.0:* 0 6525 878/nmbd
udp 0 0 0.0.0.0:138 0.0.0.0:* 0 6512 878/nmbd
udp 0 0 0.0.0.0:43573 0.0.0.0:* 1001 8313 1055/io.kecontact.0
udp6 0 0 :::5353 :::* 104 7222 564/avahi-daemon: r
udp6 0 0 :::46779 :::* 104 7224 564/avahi-daemon: r
udp6 0 0 fe80::7de6:a76b:229:546 :::* 0 6566 644/NetworkManager*** Log File - Last 25 Lines ***
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 22.02 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 0.00 Watt
2025-05-22 13:57:41.218 - info: emporia.0 (3840) device:- channel:Main usage: 168.14 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 58.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 19.70 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Vorraum usage: 62.41 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.95 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.09 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Main usage: 164.05 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 54.70 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 20.29 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Vorraum usage: 60.77 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.99 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.30 Watt============ Mark until here for C&P ============= iob diag has finished. [/s] I@fuzzy1955 sagte in Emporia Energy Adapter: Logging kann man nicht ausschalten:
*** OS-Repositories and Updates ***
W: http://raspbian.piduino.org/dists/stretch/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.Hat zwar nix mit deinem Problem zu tun, aber gleich das Repo an dein Release 'bookworm' an.
'stretch' ist ja schon seit Jahren abgekündigt.(the stretch repository is no longer maintained)
-
-
@fuzzy1955 sagte in Emporia Energy Adapter: Logging kann man nicht ausschalten:
*** OS-Repositories and Updates ***
W: http://raspbian.piduino.org/dists/stretch/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.Hat zwar nix mit deinem Problem zu tun, aber gleich das Repo an dein Release 'bookworm' an.
'stretch' ist ja schon seit Jahren abgekündigt.(the stretch repository is no longer maintained)
Ok, danke für deine Info!
Smart-Home-Automation unter IOB auf RASPI5, 16GB RAM, 50GB SSD, MariaSQL, VIS-2.
Anfang 2025 war ich Newbie in Sachen RaspBerry, Linux und IOB.
Jetzt läuft alles konstant gut und ich gebe gern meine Erfahrungen und mein Wissen an die Forums-User/Innen weiter.
Großes Danke an alle tatkräftigen Helfer im Forum! -
Hallo Forums-Spezialisten,
seit kurzem habe ich das Set des Emporia Energy Monitors VUE Gen-3 im Einsatz. Das Set mit seinen 16 Stromsensoren wäre ja recht praktisch. Nach Installation des Emporia Energy Adapter im IOB fiel mir auf, dass das Logging im Adapter nicht ausgeschaltet werden kann. In der Instanz des Adapters kann man ja nur Benutzername, Kennwort und 3 Optionen angeben.
Übersehe ich da etwas oder kann man das tatsächlich nur durch die Protokollstufe "warn" ausblenden?
Version des IOB: v7.6.3
Version des Emporia Energy Adapters: v0.1.0
Firmware des Emporia Adapters: Vue3-726Vorweg danke für eure Hinweise!
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 22.02 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 0.00 Watt
2025-05-22 13:57:41.218 - info: emporia.0 (3840) device:- channel:Main usage: 168.14 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 58.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 19.70 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Vorraum usage: 62.41 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.95 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.09 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Main usage: 164.05 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 54.70 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 20.29 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Vorraum usage: 60.77 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.99 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.30 Wattiob diag
*** BASE SYSTEM ***
Static hostname: raspberrypi
Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
Kernel: Linux 6.12.25+rpt-rpi-2712
Architecture: arm64
OS is similar to:Model : Raspberry Pi 5 Model B Rev 1.1
Docker : false
Virtualization : none
Kernel : aarch64
Userland : 64 bitSystemuptime and Load:
13:57:22 up 17:07, 2 users, load average: 0.28, 0.25, 0.11
CPU threads: 4*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.Previously detected issues:
No throttling issues detected.*** TIME AND TIMEZONES ***
Local time: Thu 2025-05-22 13:57:22 CEST
Universal time: Thu 2025-05-22 11:57:22 UTC
RTC time: Thu 2025-05-22 11:57:22
Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobrokerUser that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal: tty*** MEMORY ***
total used free shared buff/cache available
Mem: 17G 2.3G 13G 7.6M 1.4G 14G
Swap: 536M 0B 536M
Total: 17G 2.3G 13GActive iob-Instances: 16
16219 M total memory 2173 M used memory 1960 M active memory 1083 M inactive memory 12811 M free memory 129 M buffer memory 1227 M swap cache 511 M total swap 0 M used swap 511 M free swap*** top - Table Of Processes ***
top - 13:57:22 up 17:07, 2 users, load average: 0.28, 0.25, 0.11
Tasks: 204 total, 2 running, 202 sleeping, 0 stopped, 0 zombie
%Cpu(s): 25.0 us, 25.0 sy, 0.0 ni, 25.0 id, 25.0 wa, 0.0 hi, 0.0 si, 0.0 st
MiB Mem : 16219.7 total, 12811.3 free, 2173.6 used, 1356.7 buff/cache
MiB Swap: 512.0 total, 512.0 free, 0.0 used. 14046.0 avail Mem*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.*** DMESG CRITICAL ERRORS ***
No critical errors detected*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.9G 0 7.9G 0% /dev
tmpfs tmpfs 1.6G 7.3M 1.6G 1% /run
/dev/mmcblk0p2 ext4 15G 12G 2.0G 86% /
tmpfs tmpfs 8.0G 0 8.0G 0% /dev/shm
tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock
/dev/mmcblk0p1 vfat 510M 56M 455M 11% /boot/firmware
tmpfs tmpfs 1.6G 0 1.6G 0% /run/user/1000Messages concerning ext4 filesystem in dmesg:
[Wed May 21 20:49:59 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:C6:D1:C2 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=46767ad0-02 rootfstype=ext4 fsck.repair=yes rootwait
[Wed May 21 20:50:02 2025] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none.
[Wed May 21 20:50:03 2025] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none.Show mounted filesystems:
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-roFiles in neuralgic directories:
/var:
2.3G /var/
752M /var/log
751M /var/log/journal/ce49b5c207f74de48fc362bf23ca73ba
751M /var/log/journal
539M /var/libArchived and active journals take up 750.4M in the file system.
/opt/iobroker/backups:
228M /opt/iobroker/backups//opt/iobroker/iobroker-data:
1.2G /opt/iobroker/iobroker-data/files
1.2G /opt/iobroker/iobroker-data/
617M /opt/iobroker/iobroker-data/files/javascript.admin
560M /opt/iobroker/iobroker-data/files/javascript.admin/static
558M /opt/iobroker/iobroker-data/files/javascript.admin/static/jsThe five largest files in iobroker-data are:
26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.mapUSB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':No Devices found 'by-id'
Zigbee Network Settings on your coordinator/in nvbackup are:
zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***To unmask the settings run 'iob diag --unmask'
*** NodeJS-Installation ***
/usr/bin/nodejs v20.19.2
/usr/bin/node v20.19.2
/usr/bin/npm 10.8.2
/usr/bin/npx 10.8.2
/usr/bin/corepack 0.31.0nodejs:
Installed: 20.19.2-1nodesource1
Candidate: 20.19.2-1nodesource1
Version table:
*** 20.19.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
100 /var/lib/dpkg/status
20.19.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.19.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.3-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.17.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.16.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.15.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.15.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.14.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.13.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.13.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.11.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.11.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.10.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.9.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.7.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.4.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.2.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.1.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.0.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
18.19.0+dfsg-6~deb12u2 500
500 http://deb.debian.org/debian bookworm/main arm64 Packages
18.19.0+dfsg-6~deb12u1 500
500 http://deb.debian.org/debian-security bookworm-security/main arm64 PackagesTemp directories causing deletion problem: 0
No problems detectedErrors in npm tree: 0
No problems detected*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.Objects type: jsonl
States type: jsonlHosts:
raspberrypi raspberrypi (version: 7.0.6, hostname: raspberrypi , alive, uptime: 61625)Core adapters versions
js-controller: 7.0.6
admin: 7.6.3
javascript: 8.8.3nodejs modules from github: 0
Adapter State
-
system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
-
system.adapter.backitup.0 : backitup : raspberrypi - enabled
-
system.adapter.echarts.0 : echarts : raspberrypi - enabled
-
system.adapter.email.0 : email : raspberrypi - enabled
-
system.adapter.emporia.0 : emporia : raspberrypi - enabled
-
system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled
system.adapter.flot.0 : flot : raspberrypi - enabled -
system.adapter.javascript.0 : javascript : raspberrypi - enabled
-
system.adapter.javascript.1 : javascript : raspberrypi - enabled
-
system.adapter.kecontact.0 : kecontact : raspberrypi - enabled
-
system.adapter.modbus.0 : modbus : raspberrypi - enabled
system.adapter.modbus.1 : modbus : raspberrypi - disabled -
system.adapter.modbus.2 : modbus : raspberrypi - enabled
-
system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100
-
system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306
system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi - disabled
system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - enabled
system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - disabled
system.adapter.vis-2-widgets-weather-and-heating.0: vis-2-widgets-weather-and-heating: raspberrypi - disabled -
system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled
system.adapter.vis-history.0 : vis-history : raspberrypi - enabled
system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - enabled
system.adapter.vis.0 : vis : raspberrypi - disabled -
system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin
-
instance is alive
Enabled adapters with bindings
- system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
- system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100
- system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306
- system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin
ioBroker-Repositories
┌─────────┬──────────┬──────────────────────────────────────────────────┬──────────────┐
│ (index) │ name │ url │ auto upgrade │
├─────────┼──────────┼──────────────────────────────────────────────────┼──────────────┤
│ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │
└─────────┴──────────┴──────────────────────────────────────────────────┴──────────────┘Active repo(s): stable
Upgrade policy: minorInstalled ioBroker-Adapters
Used repository: stable
Adapter "admin" : 7.6.3 , installed 7.6.3
Adapter "backitup" : 3.0.31 , installed 3.0.31
Adapter "echarts" : 1.9.2 , installed 1.9.2
Adapter "email" : 2.0.4 , installed 2.0.4
Adapter "emporia" : 0.0.12 , installed 0.1.0
Adapter "energiefluss" : 3.6.2 , installed 3.6.2
Adapter "flot" : 1.12.0 , installed 1.12.0
Adapter "javascript" : 8.8.3 , installed 8.8.3
Controller "js-controller": 7.0.6 , installed 7.0.6
Adapter "kecontact" : 3.1.0 , installed 3.1.0
Adapter "modbus" : 6.3.2 , installed 6.3.2
Adapter "shelly" : 9.2.0 , installed 9.5.0-alpha.1
Adapter "socketio" : 6.7.1 , installed 6.7.1
Adapter "sql" : 3.0.1 , installed 3.0.1
Adapter "vis" : 1.5.6 , installed 1.5.6
Adapter "vis-2" : 2.9.64 , installed 2.9.64
Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2
Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.1.0
Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10
Adapter "vis-2-widgets-weather-and-heating": 0.10.4, installed 0.10.4
Adapter "vis-history" : 1.0.0 , installed 1.0.0
Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
Adapter "web" : 7.0.8 , installed 7.0.8
Adapter "ws" : 2.6.2 , installed 2.6.2Objects and States
Please stand by - This may take a while
Objects: 2007
States: 1645*** OS-Repositories and Updates ***
W: http://raspbian.piduino.org/dists/stretch/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 http://raspbian.piduino.org stretch InRelease
Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
W: http://raspbian.piduino.org/dists/stretch/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Pending Updates: 0*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 192.168.0.100:1882 0.0.0.0:* LISTEN 1001 5764 1103/io.shelly.0
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6354 699/sshd: /usr/sbin
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 878 882/smbd
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 877 882/smbd
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 901 679/iobroker.js-con
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 893 679/iobroker.js-con
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 106 6410 758/mariadbd
tcp6 0 0 :::8081 :::* LISTEN 1001 5478 894/io.admin.0
tcp6 0 0 :::8082 :::* LISTEN 1001 342453 4247/io.web.0
tcp6 0 0 :::22 :::* LISTEN 0 6356 699/sshd: /usr/sbin
tcp6 0 0 :::139 :::* LISTEN 0 876 882/smbd
tcp6 0 0 :::445 :::* LISTEN 0 875 882/smbd
udp 0 0 0.0.0.0:60881 0.0.0.0:* 104 7223 564/avahi-daemon: r
udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7221 564/avahi-daemon: r
udp 0 0 0.0.0.0:7090 0.0.0.0:* 1001 7865 1055/io.kecontact.0
udp 0 0 0.0.0.0:7092 0.0.0.0:* 1001 7866 1055/io.kecontact.0
udp 0 0 192.168.0.255:137 0.0.0.0:* 0 6524 878/nmbd
udp 0 0 192.168.0.100:137 0.0.0.0:* 0 6523 878/nmbd
udp 0 0 0.0.0.0:137 0.0.0.0:* 0 6511 878/nmbd
udp 0 0 192.168.0.255:138 0.0.0.0:* 0 6526 878/nmbd
udp 0 0 192.168.0.100:138 0.0.0.0:* 0 6525 878/nmbd
udp 0 0 0.0.0.0:138 0.0.0.0:* 0 6512 878/nmbd
udp 0 0 0.0.0.0:43573 0.0.0.0:* 1001 8313 1055/io.kecontact.0
udp6 0 0 :::5353 :::* 104 7222 564/avahi-daemon: r
udp6 0 0 :::46779 :::* 104 7224 564/avahi-daemon: r
udp6 0 0 fe80::7de6:a76b:229:546 :::* 0 6566 644/NetworkManager*** Log File - Last 25 Lines ***
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 22.02 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 0.00 Watt
2025-05-22 13:57:41.218 - info: emporia.0 (3840) device:- channel:Main usage: 168.14 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 58.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 19.70 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Vorraum usage: 62.41 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.95 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.09 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Main usage: 164.05 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 54.70 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 20.29 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Vorraum usage: 60.77 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.99 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.30 Watt============ Mark until here for C&P ============= iob diag has finished. [/s] I@fuzzy1955 sagte in Emporia Energy Adapter: Logging kann man nicht ausschalten:
Übersehe ich da etwas oder kann man das tatsächlich nur durch die Protokollstufe "warn" ausblenden?
Nö, kann schon angehen. Was bei Info rausgehauen wird, liegt im Ermessen des Entwicklers des Adapters
ioBroker@Ubuntu 24.04 LTS (VMware) für: >260 Geräte, 5 Switche, 7 AP, 10 IP-Cam, 1 NAS 42TB, 1 ESXi 15TB, 4 Proxmox 1TB, 1 Hyper-V 48TB, 14 x Echo, 5x FireTV, 5 x Tablett/Handy VIS || >=160 Tasmota/Shelly || >=95 ZigBee || PV 8.1kW / Akku 14kWh || 2x USV APC 750W kaskadiert || Creality CR-10 SE 3D-Drucker
-
-
Hallo Forums-Spezialisten,
seit kurzem habe ich das Set des Emporia Energy Monitors VUE Gen-3 im Einsatz. Das Set mit seinen 16 Stromsensoren wäre ja recht praktisch. Nach Installation des Emporia Energy Adapter im IOB fiel mir auf, dass das Logging im Adapter nicht ausgeschaltet werden kann. In der Instanz des Adapters kann man ja nur Benutzername, Kennwort und 3 Optionen angeben.
Übersehe ich da etwas oder kann man das tatsächlich nur durch die Protokollstufe "warn" ausblenden?
Version des IOB: v7.6.3
Version des Emporia Energy Adapters: v0.1.0
Firmware des Emporia Adapters: Vue3-726Vorweg danke für eure Hinweise!
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 22.02 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 0.00 Watt
2025-05-22 13:57:41.218 - info: emporia.0 (3840) device:- channel:Main usage: 168.14 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 58.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 19.70 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Vorraum usage: 62.41 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.95 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.09 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Main usage: 164.05 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 54.70 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 20.29 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Vorraum usage: 60.77 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.99 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.30 Wattiob diag
*** BASE SYSTEM ***
Static hostname: raspberrypi
Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
Kernel: Linux 6.12.25+rpt-rpi-2712
Architecture: arm64
OS is similar to:Model : Raspberry Pi 5 Model B Rev 1.1
Docker : false
Virtualization : none
Kernel : aarch64
Userland : 64 bitSystemuptime and Load:
13:57:22 up 17:07, 2 users, load average: 0.28, 0.25, 0.11
CPU threads: 4*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.Previously detected issues:
No throttling issues detected.*** TIME AND TIMEZONES ***
Local time: Thu 2025-05-22 13:57:22 CEST
Universal time: Thu 2025-05-22 11:57:22 UTC
RTC time: Thu 2025-05-22 11:57:22
Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobrokerUser that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal: tty*** MEMORY ***
total used free shared buff/cache available
Mem: 17G 2.3G 13G 7.6M 1.4G 14G
Swap: 536M 0B 536M
Total: 17G 2.3G 13GActive iob-Instances: 16
16219 M total memory 2173 M used memory 1960 M active memory 1083 M inactive memory 12811 M free memory 129 M buffer memory 1227 M swap cache 511 M total swap 0 M used swap 511 M free swap*** top - Table Of Processes ***
top - 13:57:22 up 17:07, 2 users, load average: 0.28, 0.25, 0.11
Tasks: 204 total, 2 running, 202 sleeping, 0 stopped, 0 zombie
%Cpu(s): 25.0 us, 25.0 sy, 0.0 ni, 25.0 id, 25.0 wa, 0.0 hi, 0.0 si, 0.0 st
MiB Mem : 16219.7 total, 12811.3 free, 2173.6 used, 1356.7 buff/cache
MiB Swap: 512.0 total, 512.0 free, 0.0 used. 14046.0 avail Mem*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.*** DMESG CRITICAL ERRORS ***
No critical errors detected*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.9G 0 7.9G 0% /dev
tmpfs tmpfs 1.6G 7.3M 1.6G 1% /run
/dev/mmcblk0p2 ext4 15G 12G 2.0G 86% /
tmpfs tmpfs 8.0G 0 8.0G 0% /dev/shm
tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock
/dev/mmcblk0p1 vfat 510M 56M 455M 11% /boot/firmware
tmpfs tmpfs 1.6G 0 1.6G 0% /run/user/1000Messages concerning ext4 filesystem in dmesg:
[Wed May 21 20:49:59 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:C6:D1:C2 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=46767ad0-02 rootfstype=ext4 fsck.repair=yes rootwait
[Wed May 21 20:50:02 2025] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none.
[Wed May 21 20:50:03 2025] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none.Show mounted filesystems:
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-roFiles in neuralgic directories:
/var:
2.3G /var/
752M /var/log
751M /var/log/journal/ce49b5c207f74de48fc362bf23ca73ba
751M /var/log/journal
539M /var/libArchived and active journals take up 750.4M in the file system.
/opt/iobroker/backups:
228M /opt/iobroker/backups//opt/iobroker/iobroker-data:
1.2G /opt/iobroker/iobroker-data/files
1.2G /opt/iobroker/iobroker-data/
617M /opt/iobroker/iobroker-data/files/javascript.admin
560M /opt/iobroker/iobroker-data/files/javascript.admin/static
558M /opt/iobroker/iobroker-data/files/javascript.admin/static/jsThe five largest files in iobroker-data are:
26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map
24M /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.mapUSB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':No Devices found 'by-id'
Zigbee Network Settings on your coordinator/in nvbackup are:
zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***To unmask the settings run 'iob diag --unmask'
*** NodeJS-Installation ***
/usr/bin/nodejs v20.19.2
/usr/bin/node v20.19.2
/usr/bin/npm 10.8.2
/usr/bin/npx 10.8.2
/usr/bin/corepack 0.31.0nodejs:
Installed: 20.19.2-1nodesource1
Candidate: 20.19.2-1nodesource1
Version table:
*** 20.19.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
100 /var/lib/dpkg/status
20.19.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.19.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.3-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.18.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.17.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.16.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.15.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.15.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.14.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.13.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.13.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.12.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.11.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.11.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.10.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.9.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.7.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.4.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.2.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.1.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.0.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
18.19.0+dfsg-6~deb12u2 500
500 http://deb.debian.org/debian bookworm/main arm64 Packages
18.19.0+dfsg-6~deb12u1 500
500 http://deb.debian.org/debian-security bookworm-security/main arm64 PackagesTemp directories causing deletion problem: 0
No problems detectedErrors in npm tree: 0
No problems detected*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.Objects type: jsonl
States type: jsonlHosts:
raspberrypi raspberrypi (version: 7.0.6, hostname: raspberrypi , alive, uptime: 61625)Core adapters versions
js-controller: 7.0.6
admin: 7.6.3
javascript: 8.8.3nodejs modules from github: 0
Adapter State
-
system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
-
system.adapter.backitup.0 : backitup : raspberrypi - enabled
-
system.adapter.echarts.0 : echarts : raspberrypi - enabled
-
system.adapter.email.0 : email : raspberrypi - enabled
-
system.adapter.emporia.0 : emporia : raspberrypi - enabled
-
system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled
system.adapter.flot.0 : flot : raspberrypi - enabled -
system.adapter.javascript.0 : javascript : raspberrypi - enabled
-
system.adapter.javascript.1 : javascript : raspberrypi - enabled
-
system.adapter.kecontact.0 : kecontact : raspberrypi - enabled
-
system.adapter.modbus.0 : modbus : raspberrypi - enabled
system.adapter.modbus.1 : modbus : raspberrypi - disabled -
system.adapter.modbus.2 : modbus : raspberrypi - enabled
-
system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100
-
system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306
system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi - disabled
system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - enabled
system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - disabled
system.adapter.vis-2-widgets-weather-and-heating.0: vis-2-widgets-weather-and-heating: raspberrypi - disabled -
system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled
system.adapter.vis-history.0 : vis-history : raspberrypi - enabled
system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - enabled
system.adapter.vis.0 : vis : raspberrypi - disabled -
system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin
-
instance is alive
Enabled adapters with bindings
- system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
- system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100
- system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306
- system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin
ioBroker-Repositories
┌─────────┬──────────┬──────────────────────────────────────────────────┬──────────────┐
│ (index) │ name │ url │ auto upgrade │
├─────────┼──────────┼──────────────────────────────────────────────────┼──────────────┤
│ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │
└─────────┴──────────┴──────────────────────────────────────────────────┴──────────────┘Active repo(s): stable
Upgrade policy: minorInstalled ioBroker-Adapters
Used repository: stable
Adapter "admin" : 7.6.3 , installed 7.6.3
Adapter "backitup" : 3.0.31 , installed 3.0.31
Adapter "echarts" : 1.9.2 , installed 1.9.2
Adapter "email" : 2.0.4 , installed 2.0.4
Adapter "emporia" : 0.0.12 , installed 0.1.0
Adapter "energiefluss" : 3.6.2 , installed 3.6.2
Adapter "flot" : 1.12.0 , installed 1.12.0
Adapter "javascript" : 8.8.3 , installed 8.8.3
Controller "js-controller": 7.0.6 , installed 7.0.6
Adapter "kecontact" : 3.1.0 , installed 3.1.0
Adapter "modbus" : 6.3.2 , installed 6.3.2
Adapter "shelly" : 9.2.0 , installed 9.5.0-alpha.1
Adapter "socketio" : 6.7.1 , installed 6.7.1
Adapter "sql" : 3.0.1 , installed 3.0.1
Adapter "vis" : 1.5.6 , installed 1.5.6
Adapter "vis-2" : 2.9.64 , installed 2.9.64
Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2
Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.1.0
Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10
Adapter "vis-2-widgets-weather-and-heating": 0.10.4, installed 0.10.4
Adapter "vis-history" : 1.0.0 , installed 1.0.0
Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
Adapter "web" : 7.0.8 , installed 7.0.8
Adapter "ws" : 2.6.2 , installed 2.6.2Objects and States
Please stand by - This may take a while
Objects: 2007
States: 1645*** OS-Repositories and Updates ***
W: http://raspbian.piduino.org/dists/stretch/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 http://raspbian.piduino.org stretch InRelease
Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
W: http://raspbian.piduino.org/dists/stretch/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Pending Updates: 0*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 192.168.0.100:1882 0.0.0.0:* LISTEN 1001 5764 1103/io.shelly.0
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6354 699/sshd: /usr/sbin
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 878 882/smbd
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 877 882/smbd
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 901 679/iobroker.js-con
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 893 679/iobroker.js-con
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 106 6410 758/mariadbd
tcp6 0 0 :::8081 :::* LISTEN 1001 5478 894/io.admin.0
tcp6 0 0 :::8082 :::* LISTEN 1001 342453 4247/io.web.0
tcp6 0 0 :::22 :::* LISTEN 0 6356 699/sshd: /usr/sbin
tcp6 0 0 :::139 :::* LISTEN 0 876 882/smbd
tcp6 0 0 :::445 :::* LISTEN 0 875 882/smbd
udp 0 0 0.0.0.0:60881 0.0.0.0:* 104 7223 564/avahi-daemon: r
udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7221 564/avahi-daemon: r
udp 0 0 0.0.0.0:7090 0.0.0.0:* 1001 7865 1055/io.kecontact.0
udp 0 0 0.0.0.0:7092 0.0.0.0:* 1001 7866 1055/io.kecontact.0
udp 0 0 192.168.0.255:137 0.0.0.0:* 0 6524 878/nmbd
udp 0 0 192.168.0.100:137 0.0.0.0:* 0 6523 878/nmbd
udp 0 0 0.0.0.0:137 0.0.0.0:* 0 6511 878/nmbd
udp 0 0 192.168.0.255:138 0.0.0.0:* 0 6526 878/nmbd
udp 0 0 192.168.0.100:138 0.0.0.0:* 0 6525 878/nmbd
udp 0 0 0.0.0.0:138 0.0.0.0:* 0 6512 878/nmbd
udp 0 0 0.0.0.0:43573 0.0.0.0:* 1001 8313 1055/io.kecontact.0
udp6 0 0 :::5353 :::* 104 7222 564/avahi-daemon: r
udp6 0 0 :::46779 :::* 104 7224 564/avahi-daemon: r
udp6 0 0 fe80::7de6:a76b:229:546 :::* 0 6566 644/NetworkManager*** Log File - Last 25 Lines ***
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 22.02 Watt
2025-05-22 13:57:36.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 0.00 Watt
2025-05-22 13:57:41.218 - info: emporia.0 (3840) device:- channel:Main usage: 168.14 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 58.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 19.70 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Vorraum usage: 62.41 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.95 Watt
2025-05-22 13:57:41.219 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.09 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Main usage: 164.05 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Geschirrspueler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:HeizungKlima usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:WohnzimmerKueche usage: 54.70 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:VorzimmerBad usage: 20.29 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Obergeschoss usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Vorraum usage: 60.77 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Boiler usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Waschmaschine usage: 0.00 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:Werkstatt usage: 21.99 Watt
2025-05-22 13:57:46.217 - info: emporia.0 (3840) device:- channel:eHerd usage: 6.30 Watt============ Mark until here for C&P ============= iob diag has finished. [/s] I@fuzzy1955
Erstell bitte ein issue beim Adapter. Diese Meldungen sollten nurxauf level DEBUG ausgegeben werden.Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer 'nen Kaffee spendieren will: https://paypal.me
-
-
@fuzzy1955
Erstell bitte ein issue beim Adapter. Diese Meldungen sollten nurxauf level DEBUG ausgegeben werden.@mcm1957 sagte in Emporia Energy Adapter: Logging kann man nicht ausschalten:
Erstell bitte ein issue beim Adapter
Danke für den Hinweis. Ist erledigt!
Smart-Home-Automation unter IOB auf RASPI5, 16GB RAM, 50GB SSD, MariaSQL, VIS-2.
Anfang 2025 war ich Newbie in Sachen RaspBerry, Linux und IOB.
Jetzt läuft alles konstant gut und ich gebe gern meine Erfahrungen und mein Wissen an die Forums-User/Innen weiter.
Großes Danke an alle tatkräftigen Helfer im Forum! -
Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer 'nen Kaffee spendieren will: https://paypal.me
-
@mcm1957
Danke für die Korrektur, Martin!Smart-Home-Automation unter IOB auf RASPI5, 16GB RAM, 50GB SSD, MariaSQL, VIS-2.
Anfang 2025 war ich Newbie in Sachen RaspBerry, Linux und IOB.
Jetzt läuft alles konstant gut und ich gebe gern meine Erfahrungen und mein Wissen an die Forums-User/Innen weiter.
Großes Danke an alle tatkräftigen Helfer im Forum! -
@fuzzy1955
Du kannst aber jedenfalls den ogging level für jede Instanz anpassen. Auch wenn es nicht die vorgesehene / empfohlene Vorgangsweise ist kannst du die Instanz auf Loglevel WArning stellen und damit alle Infos ausblenden. Ob du damit wichtigere Infos auch vernichtest kann ich dir nicht sagen.Dazu musst du den Expert Mode einschalten und dann in der Instanzansicht den Loglevel wählen:
Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer 'nen Kaffee spendieren will: https://paypal.me
-
@fuzzy1955
Du kannst aber jedenfalls den ogging level für jede Instanz anpassen. Auch wenn es nicht die vorgesehene / empfohlene Vorgangsweise ist kannst du die Instanz auf Loglevel WArning stellen und damit alle Infos ausblenden. Ob du damit wichtigere Infos auch vernichtest kann ich dir nicht sagen.Dazu musst du den Expert Mode einschalten und dann in der Instanzansicht den Loglevel wählen:
@mcm1957 sagte in [verschoben -> github] Emporia Adapter: Logging ausschalten:
Du kannst aber jedenfalls den Logging level für jede Instanz anpassen
Danke für den Hinweis, Martin! Das wollte ich wegen möglicher Nebenwirkungen noch vermeiden. Ich probiere es mal in meinem Testsystem.
Smart-Home-Automation unter IOB auf RASPI5, 16GB RAM, 50GB SSD, MariaSQL, VIS-2.
Anfang 2025 war ich Newbie in Sachen RaspBerry, Linux und IOB.
Jetzt läuft alles konstant gut und ich gebe gern meine Erfahrungen und mein Wissen an die Forums-User/Innen weiter.
Großes Danke an alle tatkräftigen Helfer im Forum!
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden304
Online32.8k
Benutzer82.9k
Themen1.3m
Beiträge