Zwei Strings zusammenführen
-
Hallo Leute!
Da mir das letzte mal schnell und umkompliziert geholfen wurde bin ich mal wieder zurückgekehrt.Folgendes:
Ich bekomme vom KNX-BUS zwei Werte (als String), jeweils ein Datum und die Tage bis zum Datum, und würde diese gerne in einem String zusammenfassen. Der Soll dann wiefolgt aussehen:
27.01.25 (13d) > Datum (Tage"d")
Habe mir nach einigem Lesen im Internet die Methode rausgesucht, in welcher ich die zwei payloads in jeweils einen flow umwandle und diese dann in einer Funktion zusammensetze. Nur leider will das nicht so richtig.
Erkennt jemand meinen Fehler, oder kennt eine einfachere möglichkeit?
Vielen Dank!
-
Hallo Leute!
Da mir das letzte mal schnell und umkompliziert geholfen wurde bin ich mal wieder zurückgekehrt.Folgendes:
Ich bekomme vom KNX-BUS zwei Werte (als String), jeweils ein Datum und die Tage bis zum Datum, und würde diese gerne in einem String zusammenfassen. Der Soll dann wiefolgt aussehen:
27.01.25 (13d) > Datum (Tage"d")
Habe mir nach einigem Lesen im Internet die Methode rausgesucht, in welcher ich die zwei payloads in jeweils einen flow umwandle und diese dann in einer Funktion zusammensetze. Nur leider will das nicht so richtig.
Erkennt jemand meinen Fehler, oder kennt eine einfachere möglichkeit?
Vielen Dank!
-
So sieht der Output der Funktion aus:
und so der Output von Datum und Tage nach der umwandlung mit der change node
Du hast einen Typo drin. GelbeDatum statt GelbDatum. Somit passt die Meldung, dass GelbeDatum nicht definiert ist.
Das korrigieren und dann nochmal probieren. Ich würde statt
flow.GelbeTageeinfach eine Variable nehmen, oder direkt zuweisen.
msg.payload = flow.get("GelbDatum") + " (" + flow.get("GelbTage")+")"; -
Du hast einen Typo drin. GelbeDatum statt GelbDatum. Somit passt die Meldung, dass GelbeDatum nicht definiert ist.
Das korrigieren und dann nochmal probieren. Ich würde statt
flow.GelbeTageeinfach eine Variable nehmen, oder direkt zuweisen.
msg.payload = flow.get("GelbDatum") + " (" + flow.get("GelbTage")+")";@peterfido vielen Dank, probiere es sofort am Freitag. :)
-
Du hast einen Typo drin. GelbeDatum statt GelbDatum. Somit passt die Meldung, dass GelbeDatum nicht definiert ist.
Das korrigieren und dann nochmal probieren. Ich würde statt
flow.GelbeTageeinfach eine Variable nehmen, oder direkt zuweisen.
msg.payload = flow.get("GelbDatum") + " (" + flow.get("GelbTage")+")";Die Funktion "msg.payload = flow.get("GelbDatum") + " (" + flow.get("GelbTage")+")";" funktioniert super (siehe Payload auf dem Bild). Nur leider erkennt die KNX Node den Payload nur zur hälfte (siehe Wert unter der Node). Hast du eine Ahnung wie es dazu kommt? Zu lang ist die Nachricht nicht. Sie ist genau 14 Werte Lang - so wie als maximum erlaubt.
-
Die Funktion "msg.payload = flow.get("GelbDatum") + " (" + flow.get("GelbTage")+")";" funktioniert super (siehe Payload auf dem Bild). Nur leider erkennt die KNX Node den Payload nur zur hälfte (siehe Wert unter der Node). Hast du eine Ahnung wie es dazu kommt? Zu lang ist die Nachricht nicht. Sie ist genau 14 Werte Lang - so wie als maximum erlaubt.
-
@ju_
mangels KNX kann ich da nur spekulieren. Evtl. mag es die Leerzeichen nicht, die Klammer, oder irgendwas anderes. Da stehen nichtdruckbare Zeichen im Node. Wo kommen die her? Evtl. mal dessen Werte posten.@peterfido habe es bereits ohne Klammern und leerzeichen probiert. Bringt alles nichts. Aber die Debug Node zeigt immer das korrekte an. Ich weis nicht wieso die KNX Node die eigentlich druckbaren zeichen als nicht druckbare wertet. :(
-
@peterfido habe es bereits ohne Klammern und leerzeichen probiert. Bringt alles nichts. Aber die Debug Node zeigt immer das korrekte an. Ich weis nicht wieso die KNX Node die eigentlich druckbaren zeichen als nicht druckbare wertet. :(
@ju_ Ich habe eben mal geschaut. Du kannst wohl wählen, welches Datenformat Du willst. ASCII Zeichen, UTF8 Zeichen, etc.
Bei mir zeigt er aber keine Vorschau am Node selbst an. Habe ja auch keinen KNX-Bus, wohin das gesendet werden kann. Du kannst Dein Node-Diagramm ja mal exportieren und hier posten.
Bei mir sieht es so aus:
-
@ju_ Ich habe eben mal geschaut. Du kannst wohl wählen, welches Datenformat Du willst. ASCII Zeichen, UTF8 Zeichen, etc.
Bei mir zeigt er aber keine Vorschau am Node selbst an. Habe ja auch keinen KNX-Bus, wohin das gesendet werden kann. Du kannst Dein Node-Diagramm ja mal exportieren und hier posten.
Bei mir sieht es so aus:
@peterfido kannst du mir erklären, wie ich ein "Node-Diagramm" exportiere? Dachte es geht nur über Bilder. Übrigend wenn ich über eine Inject Node direkt "27.01.25 (10d)" als "msg.payload" auf die KNX Node schicke funktioniert es. Also scheint sie irgendwas gegen den Output der Funktion zu haben.
-
@peterfido kannst du mir erklären, wie ich ein "Node-Diagramm" exportiere? Dachte es geht nur über Bilder. Übrigend wenn ich über eine Inject Node direkt "27.01.25 (10d)" als "msg.payload" auf die KNX Node schicke funktioniert es. Also scheint sie irgendwas gegen den Output der Funktion zu haben.
-
@ju_ ja, bei mir geht es auch. Ich frage mich, mit welchem KNX sich die Node standardmäßig verbindet.
Exportieren geht über das Menü oben rechts in Node-Red.
@peterfido und dann als JSON?
-
@peterfido und dann als JSON?
-
@peterfido ist drin, musste ihn nochmal fix bearbeiten.
-
@peterfido ist drin, musste ihn nochmal fix bearbeiten.
-
@peterfido ```
[{"id":"90489d5f43af09b5","type":"knxUltimate","z":"de15a47dbea6c285","server":"98b73fada3be00aa","topic":"8/1/0","setTopicType":"str","outputtopic":"","dpt":"16.001","initialread":"1","notifyreadrequest":false,"notifyresponse":true,"notifywrite":true,"notifyreadrequestalsorespondtobus":false,"notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized":"0","name":"Gelbe Tonne Datum","outputtype":"write","outputRBE":"true","inputRBE":"false","formatmultiplyvalue":1,"formatnegativevalue":"leave","formatdecimalsvalue":999,"passthrough":"no","sendMsgToKNXCode":"","receiveMsgFromKNXCode":"","listenallga":false,"x":130,"y":100,"wires":[["02034f10ed38c317"]]},{"id":"a2dbe9c2f590573a","type":"knxUltimate","z":"de15a47dbea6c285","server":"98b73fada3be00aa","topic":"8/2/0","setTopicType":"str","outputtopic":"","dpt":"16.001","initialread":"1","notifyreadrequest":false,"notifyresponse":true,"notifywrite":true,"notifyreadrequestalsorespondtobus":false,"notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized":"0","name":"Gelbe Tonne Tage","outputtype":"write","outputRBE":"true","inputRBE":"false","formatmultiplyvalue":1,"formatnegativevalue":"leave","formatdecimalsvalue":999,"passthrough":"no","sendMsgToKNXCode":"","receiveMsgFromKNXCode":"","listenallga":false,"x":130,"y":160,"wires":[["4ea9b5ca4631e2ce"]]},{"id":"02034f10ed38c317","type":"change","z":"de15a47dbea6c285","name":"","rules":[{"t":"set","p":"topic","pt":"msg","to":"Datum","tot":"str"},{"t":"set","p":"GelbDatum","pt":"flow","to":"payload","tot":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":360,"y":100,"wires":[["5b74298a9d871858"]]},{"id":"4ea9b5ca4631e2ce","type":"change","z":"de15a47dbea6c285","name":"","rules":[{"t":"set","p":"topic","pt":"msg","to":"Tage","tot":"str"},{"t":"set","p":"GelbTage","pt":"flow","to":"payload","tot":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":360,"y":160,"wires":[["5b74298a9d871858"]]},{"id":"58a426e6d74f6020","type":"knxUltimate","z":"de15a47dbea6c285","server":"98b73fada3be00aa","topic":"8/3/0","setTopicType":"str","outputtopic":"","dpt":"16.001","initialread":0,"notifyreadrequest":false,"notifyresponse":false,"notifywrite":true,"notifyreadrequestalsorespondtobus":false,"notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized":"0","name":"Zusammengesetztes Datum Gelb","outputtype":"write","outputRBE":"true","inputRBE":"false","formatmultiplyvalue":1,"formatnegativevalue":"leave","formatdecimalsvalue":999,"passthrough":"no","sendMsgToKNXCode":"","receiveMsgFromKNXCode":"","listenallga":false,"x":1230,"y":100,"wires":[object Object]},{"id":"2861740aaba0f1c9","type":"inject","z":"de15a47dbea6c285","name":"Manuelle Betätigung","props":[{"p":"payload"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"27.01.25 (10d)","payloadType":"str","x":890,"y":20,"wires":[["58a426e6d74f6020"]]},{"id":"d22d4525c542b4d0","type":"debug","z":"de15a47dbea6c285","name":"debug 1","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"true","targetType":"full","statusVal":"","statusType":"auto","x":1140,"y":180,"wires":[]},{"id":"cccfb4eb94a27733","type":"change","z":"de15a47dbea6c285","name":"","rules":[{"t":"set","p":"topic","pt":"msg","to":"8/3/0","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":850,"y":100,"wires":[["58a426e6d74f6020","d22d4525c542b4d0"]]},{"id":"5b74298a9d871858","type":"function","z":"de15a47dbea6c285","name":"function 3","func":"msg.payload = flow.get("GelbDatum") + " (" + flow.get("GelbTage") + "d)";\nreturn msg;","outputs":1,"timeout":0,"noerr":0,"initialize":"","finalize":"","libs":[],"x":620,"y":100,"wires":[["cccfb4eb94a27733"]]},{"id":"141076626e9e6cf8","type":"inject","z":"de15a47dbea6c285","name":"Manuelle Betätigung","props":[{"p":"topic","vt":"str"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","x":350,"y":40,"wires":[["5b74298a9d871858"]]},{"id":"98b73fada3be00aa","type":"knxUltimate-config","host":"10.0.0.2","port":"3671","physAddr":"1.1.64","hostProtocol":"TunnelUDP","suppressACKRequest":false,"csv":"","KNXEthInterface":"Auto","KNXEthInterfaceManuallyInput":"","stopETSImportIfNoDatapoint":"fake","loglevel":"error","name":"KNX Gateway","localEchoInTunneling":true,"delaybetweentelegrams":"50","ignoreTelegramsWithRepeatedFlag":false,"autoReconnect":"yes"}] -
@peterfido ```
[{"id":"90489d5f43af09b5","type":"knxUltimate","z":"de15a47dbea6c285","server":"98b73fada3be00aa","topic":"8/1/0","setTopicType":"str","outputtopic":"","dpt":"16.001","initialread":"1","notifyreadrequest":false,"notifyresponse":true,"notifywrite":true,"notifyreadrequestalsorespondtobus":false,"notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized":"0","name":"Gelbe Tonne Datum","outputtype":"write","outputRBE":"true","inputRBE":"false","formatmultiplyvalue":1,"formatnegativevalue":"leave","formatdecimalsvalue":999,"passthrough":"no","sendMsgToKNXCode":"","receiveMsgFromKNXCode":"","listenallga":false,"x":130,"y":100,"wires":[["02034f10ed38c317"]]},{"id":"a2dbe9c2f590573a","type":"knxUltimate","z":"de15a47dbea6c285","server":"98b73fada3be00aa","topic":"8/2/0","setTopicType":"str","outputtopic":"","dpt":"16.001","initialread":"1","notifyreadrequest":false,"notifyresponse":true,"notifywrite":true,"notifyreadrequestalsorespondtobus":false,"notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized":"0","name":"Gelbe Tonne Tage","outputtype":"write","outputRBE":"true","inputRBE":"false","formatmultiplyvalue":1,"formatnegativevalue":"leave","formatdecimalsvalue":999,"passthrough":"no","sendMsgToKNXCode":"","receiveMsgFromKNXCode":"","listenallga":false,"x":130,"y":160,"wires":[["4ea9b5ca4631e2ce"]]},{"id":"02034f10ed38c317","type":"change","z":"de15a47dbea6c285","name":"","rules":[{"t":"set","p":"topic","pt":"msg","to":"Datum","tot":"str"},{"t":"set","p":"GelbDatum","pt":"flow","to":"payload","tot":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":360,"y":100,"wires":[["5b74298a9d871858"]]},{"id":"4ea9b5ca4631e2ce","type":"change","z":"de15a47dbea6c285","name":"","rules":[{"t":"set","p":"topic","pt":"msg","to":"Tage","tot":"str"},{"t":"set","p":"GelbTage","pt":"flow","to":"payload","tot":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":360,"y":160,"wires":[["5b74298a9d871858"]]},{"id":"58a426e6d74f6020","type":"knxUltimate","z":"de15a47dbea6c285","server":"98b73fada3be00aa","topic":"8/3/0","setTopicType":"str","outputtopic":"","dpt":"16.001","initialread":0,"notifyreadrequest":false,"notifyresponse":false,"notifywrite":true,"notifyreadrequestalsorespondtobus":false,"notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized":"0","name":"Zusammengesetztes Datum Gelb","outputtype":"write","outputRBE":"true","inputRBE":"false","formatmultiplyvalue":1,"formatnegativevalue":"leave","formatdecimalsvalue":999,"passthrough":"no","sendMsgToKNXCode":"","receiveMsgFromKNXCode":"","listenallga":false,"x":1230,"y":100,"wires":[object Object]},{"id":"2861740aaba0f1c9","type":"inject","z":"de15a47dbea6c285","name":"Manuelle Betätigung","props":[{"p":"payload"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"27.01.25 (10d)","payloadType":"str","x":890,"y":20,"wires":[["58a426e6d74f6020"]]},{"id":"d22d4525c542b4d0","type":"debug","z":"de15a47dbea6c285","name":"debug 1","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"true","targetType":"full","statusVal":"","statusType":"auto","x":1140,"y":180,"wires":[]},{"id":"cccfb4eb94a27733","type":"change","z":"de15a47dbea6c285","name":"","rules":[{"t":"set","p":"topic","pt":"msg","to":"8/3/0","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":850,"y":100,"wires":[["58a426e6d74f6020","d22d4525c542b4d0"]]},{"id":"5b74298a9d871858","type":"function","z":"de15a47dbea6c285","name":"function 3","func":"msg.payload = flow.get("GelbDatum") + " (" + flow.get("GelbTage") + "d)";\nreturn msg;","outputs":1,"timeout":0,"noerr":0,"initialize":"","finalize":"","libs":[],"x":620,"y":100,"wires":[["cccfb4eb94a27733"]]},{"id":"141076626e9e6cf8","type":"inject","z":"de15a47dbea6c285","name":"Manuelle Betätigung","props":[{"p":"topic","vt":"str"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","x":350,"y":40,"wires":[["5b74298a9d871858"]]},{"id":"98b73fada3be00aa","type":"knxUltimate-config","host":"10.0.0.2","port":"3671","physAddr":"1.1.64","hostProtocol":"TunnelUDP","suppressACKRequest":false,"csv":"","KNXEthInterface":"Auto","KNXEthInterfaceManuallyInput":"","stopETSImportIfNoDatapoint":"fake","loglevel":"error","name":"KNX Gateway","localEchoInTunneling":true,"delaybetweentelegrams":"50","ignoreTelegramsWithRepeatedFlag":false,"autoReconnect":"yes"}] -
@peterfido habe ich verstanden, ist oben geändert. Sorry :D
-
@peterfido habe ich verstanden, ist oben geändert. Sorry :D
@ju_ Fast :)
Sollte so aussehen:
[ { "id": "076b7140f384fc31", "type": "tab", "label": "Flow 2", "disabled": false, "info": "", "env": [] }, { "id": "4be12d8e923cd33b", "type": "knxUltimate", "z": "076b7140f384fc31", "server": "2e5af07acfd111fe", "topic": "8/3/0", "setTopicType": "str", "outputtopic": "", "dpt": "16.000", "initialread": 0, "notifyreadrequest": false, "notifyresponse": false, "notifywrite": true, "notifyreadrequestalsorespondtobus": false, "notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized": "0", "name": "", "outputtype": "write", "outputRBE": "true", "inputRBE": "false", "formatmultiplyvalue": 1, "formatnegativevalue": "leave", "formatdecimalsvalue": 999, "passthrough": "yes", "sendMsgToKNXCode": "", "receiveMsgFromKNXCode": "", "listenallga": false, "x": 360, "y": 100, "wires": [ [ "2d3c593b7f85b176" ] ] }, { "id": "b0b348a7ad1db526", "type": "inject", "z": "076b7140f384fc31", "name": "", "props": [ { "p": "payload" }, { "p": "topic", "vt": "str" } ], "repeat": "", "crontab": "", "once": false, "onceDelay": 0.1, "topic": "", "payload": "30.01.25 (13d)", "payloadType": "str", "x": 170, "y": 100, "wires": [ [ "4be12d8e923cd33b" ] ] }, { "id": "2d3c593b7f85b176", "type": "debug", "z": "076b7140f384fc31", "name": "debug 2", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "true", "targetType": "full", "statusVal": "", "statusType": "auto", "x": 560, "y": 100, "wires": [] }, { "id": "2e5af07acfd111fe", "type": "knxUltimate-config", "host": "224.0.23.12", "port": "3671", "physAddr": "15.15.22", "hostProtocol": "Auto", "suppressACKRequest": false, "csv": "", "KNXEthInterface": "Auto", "KNXEthInterfaceManuallyInput": "", "stopETSImportIfNoDatapoint": "fake", "loglevel": "error", "name": "KNX Gateway", "localEchoInTunneling": true, "delaybetweentelegrams": "25", "ignoreTelegramsWithRepeatedFlag": false, "autoReconnect": "yes" } ] -
@ju_ Fast :)
Sollte so aussehen:
[ { "id": "076b7140f384fc31", "type": "tab", "label": "Flow 2", "disabled": false, "info": "", "env": [] }, { "id": "4be12d8e923cd33b", "type": "knxUltimate", "z": "076b7140f384fc31", "server": "2e5af07acfd111fe", "topic": "8/3/0", "setTopicType": "str", "outputtopic": "", "dpt": "16.000", "initialread": 0, "notifyreadrequest": false, "notifyresponse": false, "notifywrite": true, "notifyreadrequestalsorespondtobus": false, "notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized": "0", "name": "", "outputtype": "write", "outputRBE": "true", "inputRBE": "false", "formatmultiplyvalue": 1, "formatnegativevalue": "leave", "formatdecimalsvalue": 999, "passthrough": "yes", "sendMsgToKNXCode": "", "receiveMsgFromKNXCode": "", "listenallga": false, "x": 360, "y": 100, "wires": [ [ "2d3c593b7f85b176" ] ] }, { "id": "b0b348a7ad1db526", "type": "inject", "z": "076b7140f384fc31", "name": "", "props": [ { "p": "payload" }, { "p": "topic", "vt": "str" } ], "repeat": "", "crontab": "", "once": false, "onceDelay": 0.1, "topic": "", "payload": "30.01.25 (13d)", "payloadType": "str", "x": 170, "y": 100, "wires": [ [ "4be12d8e923cd33b" ] ] }, { "id": "2d3c593b7f85b176", "type": "debug", "z": "076b7140f384fc31", "name": "debug 2", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "true", "targetType": "full", "statusVal": "", "statusType": "auto", "x": 560, "y": 100, "wires": [] }, { "id": "2e5af07acfd111fe", "type": "knxUltimate-config", "host": "224.0.23.12", "port": "3671", "physAddr": "15.15.22", "hostProtocol": "Auto", "suppressACKRequest": false, "csv": "", "KNXEthInterface": "Auto", "KNXEthInterfaceManuallyInput": "", "stopETSImportIfNoDatapoint": "fake", "loglevel": "error", "name": "KNX Gateway", "localEchoInTunneling": true, "delaybetweentelegrams": "25", "ignoreTelegramsWithRepeatedFlag": false, "autoReconnect": "yes" } ]@peterfido jetzt :D
[ { "id": "90489d5f43af09b5", "type": "knxUltimate", "z": "de15a47dbea6c285", "server": "98b73fada3be00aa", "topic": "8/1/0", "setTopicType": "str", "outputtopic": "", "dpt": "16.001", "initialread": "1", "notifyreadrequest": false, "notifyresponse": true, "notifywrite": true, "notifyreadrequestalsorespondtobus": false, "notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized": "0", "name": "Gelbe Tonne Datum", "outputtype": "write", "outputRBE": "true", "inputRBE": "false", "formatmultiplyvalue": 1, "formatnegativevalue": "leave", "formatdecimalsvalue": 999, "passthrough": "no", "sendMsgToKNXCode": "", "receiveMsgFromKNXCode": "", "listenallga": false, "x": 130, "y": 100, "wires": [ [ "02034f10ed38c317" ] ] }, { "id": "a2dbe9c2f590573a", "type": "knxUltimate", "z": "de15a47dbea6c285", "server": "98b73fada3be00aa", "topic": "8/2/0", "setTopicType": "str", "outputtopic": "", "dpt": "16.001", "initialread": "1", "notifyreadrequest": false, "notifyresponse": true, "notifywrite": true, "notifyreadrequestalsorespondtobus": false, "notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized": "0", "name": "Gelbe Tonne Tage", "outputtype": "write", "outputRBE": "true", "inputRBE": "false", "formatmultiplyvalue": 1, "formatnegativevalue": "leave", "formatdecimalsvalue": 999, "passthrough": "no", "sendMsgToKNXCode": "", "receiveMsgFromKNXCode": "", "listenallga": false, "x": 130, "y": 160, "wires": [ [ "4ea9b5ca4631e2ce" ] ] }, { "id": "02034f10ed38c317", "type": "change", "z": "de15a47dbea6c285", "name": "", "rules": [ { "t": "set", "p": "topic", "pt": "msg", "to": "Datum", "tot": "str" }, { "t": "set", "p": "GelbDatum", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 360, "y": 100, "wires": [ [ "5b74298a9d871858" ] ] }, { "id": "4ea9b5ca4631e2ce", "type": "change", "z": "de15a47dbea6c285", "name": "", "rules": [ { "t": "set", "p": "topic", "pt": "msg", "to": "Tage", "tot": "str" }, { "t": "set", "p": "GelbTage", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 360, "y": 160, "wires": [ [ "5b74298a9d871858" ] ] }, { "id": "58a426e6d74f6020", "type": "knxUltimate", "z": "de15a47dbea6c285", "server": "98b73fada3be00aa", "topic": "8/3/0", "setTopicType": "str", "outputtopic": "", "dpt": "16.001", "initialread": 0, "notifyreadrequest": false, "notifyresponse": false, "notifywrite": true, "notifyreadrequestalsorespondtobus": false, "notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized": "0", "name": "Zusammengesetztes Datum Gelb", "outputtype": "write", "outputRBE": "true", "inputRBE": "false", "formatmultiplyvalue": 1, "formatnegativevalue": "leave", "formatdecimalsvalue": 999, "passthrough": "no", "sendMsgToKNXCode": "", "receiveMsgFromKNXCode": "", "listenallga": false, "x": 1230, "y": 100, "wires": [ [] ] }, { "id": "2861740aaba0f1c9", "type": "inject", "z": "de15a47dbea6c285", "name": "Manuelle Betätigung", "props": [ { "p": "payload" } ], "repeat": "", "crontab": "", "once": false, "onceDelay": 0.1, "topic": "", "payload": "27.01.25 (10d)", "payloadType": "str", "x": 890, "y": 20, "wires": [ [ "58a426e6d74f6020" ] ] }, { "id": "d22d4525c542b4d0", "type": "debug", "z": "de15a47dbea6c285", "name": "debug 1", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "true", "targetType": "full", "statusVal": "", "statusType": "auto", "x": 1140, "y": 180, "wires": [] }, { "id": "cccfb4eb94a27733", "type": "change", "z": "de15a47dbea6c285", "name": "", "rules": [ { "t": "set", "p": "topic", "pt": "msg", "to": "8/3/0", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 850, "y": 100, "wires": [ [ "58a426e6d74f6020", "d22d4525c542b4d0" ] ] }, { "id": "5b74298a9d871858", "type": "function", "z": "de15a47dbea6c285", "name": "function 3", "func": "msg.payload = flow.get(\"GelbDatum\") + \" (\" + flow.get(\"GelbTage\") + \"d)\";\nreturn msg;", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 620, "y": 100, "wires": [ [ "cccfb4eb94a27733" ] ] }, { "id": "141076626e9e6cf8", "type": "inject", "z": "de15a47dbea6c285", "name": "Manuelle Betätigung", "props": [ { "p": "topic", "vt": "str" } ], "repeat": "", "crontab": "", "once": false, "onceDelay": 0.1, "topic": "", "x": 350, "y": 40, "wires": [ [ "5b74298a9d871858" ] ] }, { "id": "98b73fada3be00aa", "type": "knxUltimate-config", "host": "10.0.0.2", "port": "3671", "physAddr": "1.1.64", "hostProtocol": "TunnelUDP", "suppressACKRequest": false, "csv": "", "KNXEthInterface": "Auto", "KNXEthInterfaceManuallyInput": "", "stopETSImportIfNoDatapoint": "fake", "loglevel": "error", "name": "KNX Gateway", "localEchoInTunneling": true, "delaybetweentelegrams": "50", "ignoreTelegramsWithRepeatedFlag": false, "autoReconnect": "yes" } ] -
@peterfido jetzt :D
[ { "id": "90489d5f43af09b5", "type": "knxUltimate", "z": "de15a47dbea6c285", "server": "98b73fada3be00aa", "topic": "8/1/0", "setTopicType": "str", "outputtopic": "", "dpt": "16.001", "initialread": "1", "notifyreadrequest": false, "notifyresponse": true, "notifywrite": true, "notifyreadrequestalsorespondtobus": false, "notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized": "0", "name": "Gelbe Tonne Datum", "outputtype": "write", "outputRBE": "true", "inputRBE": "false", "formatmultiplyvalue": 1, "formatnegativevalue": "leave", "formatdecimalsvalue": 999, "passthrough": "no", "sendMsgToKNXCode": "", "receiveMsgFromKNXCode": "", "listenallga": false, "x": 130, "y": 100, "wires": [ [ "02034f10ed38c317" ] ] }, { "id": "a2dbe9c2f590573a", "type": "knxUltimate", "z": "de15a47dbea6c285", "server": "98b73fada3be00aa", "topic": "8/2/0", "setTopicType": "str", "outputtopic": "", "dpt": "16.001", "initialread": "1", "notifyreadrequest": false, "notifyresponse": true, "notifywrite": true, "notifyreadrequestalsorespondtobus": false, "notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized": "0", "name": "Gelbe Tonne Tage", "outputtype": "write", "outputRBE": "true", "inputRBE": "false", "formatmultiplyvalue": 1, "formatnegativevalue": "leave", "formatdecimalsvalue": 999, "passthrough": "no", "sendMsgToKNXCode": "", "receiveMsgFromKNXCode": "", "listenallga": false, "x": 130, "y": 160, "wires": [ [ "4ea9b5ca4631e2ce" ] ] }, { "id": "02034f10ed38c317", "type": "change", "z": "de15a47dbea6c285", "name": "", "rules": [ { "t": "set", "p": "topic", "pt": "msg", "to": "Datum", "tot": "str" }, { "t": "set", "p": "GelbDatum", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 360, "y": 100, "wires": [ [ "5b74298a9d871858" ] ] }, { "id": "4ea9b5ca4631e2ce", "type": "change", "z": "de15a47dbea6c285", "name": "", "rules": [ { "t": "set", "p": "topic", "pt": "msg", "to": "Tage", "tot": "str" }, { "t": "set", "p": "GelbTage", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 360, "y": 160, "wires": [ [ "5b74298a9d871858" ] ] }, { "id": "58a426e6d74f6020", "type": "knxUltimate", "z": "de15a47dbea6c285", "server": "98b73fada3be00aa", "topic": "8/3/0", "setTopicType": "str", "outputtopic": "", "dpt": "16.001", "initialread": 0, "notifyreadrequest": false, "notifyresponse": false, "notifywrite": true, "notifyreadrequestalsorespondtobus": false, "notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized": "0", "name": "Zusammengesetztes Datum Gelb", "outputtype": "write", "outputRBE": "true", "inputRBE": "false", "formatmultiplyvalue": 1, "formatnegativevalue": "leave", "formatdecimalsvalue": 999, "passthrough": "no", "sendMsgToKNXCode": "", "receiveMsgFromKNXCode": "", "listenallga": false, "x": 1230, "y": 100, "wires": [ [] ] }, { "id": "2861740aaba0f1c9", "type": "inject", "z": "de15a47dbea6c285", "name": "Manuelle Betätigung", "props": [ { "p": "payload" } ], "repeat": "", "crontab": "", "once": false, "onceDelay": 0.1, "topic": "", "payload": "27.01.25 (10d)", "payloadType": "str", "x": 890, "y": 20, "wires": [ [ "58a426e6d74f6020" ] ] }, { "id": "d22d4525c542b4d0", "type": "debug", "z": "de15a47dbea6c285", "name": "debug 1", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "true", "targetType": "full", "statusVal": "", "statusType": "auto", "x": 1140, "y": 180, "wires": [] }, { "id": "cccfb4eb94a27733", "type": "change", "z": "de15a47dbea6c285", "name": "", "rules": [ { "t": "set", "p": "topic", "pt": "msg", "to": "8/3/0", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 850, "y": 100, "wires": [ [ "58a426e6d74f6020", "d22d4525c542b4d0" ] ] }, { "id": "5b74298a9d871858", "type": "function", "z": "de15a47dbea6c285", "name": "function 3", "func": "msg.payload = flow.get(\"GelbDatum\") + \" (\" + flow.get(\"GelbTage\") + \"d)\";\nreturn msg;", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 620, "y": 100, "wires": [ [ "cccfb4eb94a27733" ] ] }, { "id": "141076626e9e6cf8", "type": "inject", "z": "de15a47dbea6c285", "name": "Manuelle Betätigung", "props": [ { "p": "topic", "vt": "str" } ], "repeat": "", "crontab": "", "once": false, "onceDelay": 0.1, "topic": "", "x": 350, "y": 40, "wires": [ [ "5b74298a9d871858" ] ] }, { "id": "98b73fada3be00aa", "type": "knxUltimate-config", "host": "10.0.0.2", "port": "3671", "physAddr": "1.1.64", "hostProtocol": "TunnelUDP", "suppressACKRequest": false, "csv": "", "KNXEthInterface": "Auto", "KNXEthInterfaceManuallyInput": "", "stopETSImportIfNoDatapoint": "fake", "loglevel": "error", "name": "KNX Gateway", "localEchoInTunneling": true, "delaybetweentelegrams": "50", "ignoreTelegramsWithRepeatedFlag": false, "autoReconnect": "yes" } ]@ju_ probiere mal:
[ { "id": "5b74298a9d871858", "type": "function", "z": "e85adb77025ff03d", "name": "function 3", "func": "if(msg.topic==\"Datum\"){\n flow.set(\"GelbDatum\", msg.payload.slice(0,8));\n}\nif(msg.topic==\"Tage\"){\n var s = msg.payload;\n for(var i=1;i<s.length;i++){\n var x = s.slice(i,i+1);\n if(isNaN(x)){\n flow.set(\"GelbTage\", s.slice(0,i-1));\n break;\n }\n }\n}\nnode.status({ text: flow.get(\"GelbDatum\") + flow.get(\"GelbTage\") + \" \" + x });\n\nif(flow.get(\"GelbDatum\").length > 0 && flow.get(\"GelbTage\").length > 0) {\n msg.payload = flow.get(\"GelbDatum\").slice(0,8) + \" (\" + flow.get(\"GelbTage\") + \"d)\";\n node.status({text: msg.payload});\n return msg;\n}", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "// Der Code hier wird ausgeführt,\n// wenn der Node gestartet wird\nflow.set(\"GelbDatum\",\"\");\nflow.set(\"GelbTage\", \"\");\n", "finalize": "", "libs": [], "x": 620, "y": 200, "wires": [ [ "cccfb4eb94a27733" ] ] } ]Ich habe die Strings jetzt nach der erwarteten Länge abgeschnitten.
Im Prinzip nur die Function Node:
if(msg.topic=="Datum"){ flow.set("GelbDatum", msg.payload.slice(0,8)); } if(msg.topic=="Tage"){ var s = msg.payload; for(var i=1;i<s.length;i++){ var x = s.slice(i,i+1); if(isNaN(x)){ flow.set("GelbTage", s.slice(0,i-1)); break; } } } node.status({ text: flow.get("GelbDatum") + flow.get("GelbTage") + " " + x }); if(flow.get("GelbDatum").length > 0 && flow.get("GelbTage").length > 0) { msg.payload = flow.get("GelbDatum").slice(0,8) + " (" + flow.get("GelbTage") + "d)"; node.status({text: msg.payload}); return msg; }Ich habe es nochmal editiert.
Im Start-Bereich der Function die Variablen zurücksetzen. Sonst bleiben die alten Werte.
flow.set("GelbDatum",""); flow.set("GelbTage", "");
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
479
Online32.9k
Benutzer82.9k
Themen1.3m
Beiträge