UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[haselchen]

@plotzkella

Wie genau resettet? Welche Methode?
Genaue Schritte , die Du danach gemacht hast.

[plotzkella]

Habe es genau so gemacht wie in Deinem 2. Link.

40 Sekunden die Taste gedrückt, stromlos gemacht, wieder angesteckt, danach Reset 1 über den Browser eingegeben. Wenn ich mich in den Tasmota AP ("tasmota-BB24A7-1191") einlogge, werde ich nach einer Sekunde wieder "rausgeschmissen"...

Edit: über mein iPhone kann ich mich nicht in den AP einloggen, über ein Windows-Laptop schon. Das WebGUI läuft immer noch nicht; der Status liefert folgende Ausgabe:

{"Status":{"Module":1,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"tasmota_BB24A7","ButtonTopic":"0","Power":"0","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0},"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota-DE.bin.gz","RestartReason":"Exception","Uptime":"0T00:00:06","StartupUTC":"","Sleep":50,"CfgHolder":4617,"BootCount":13,"BCResetTime":"1970-01-01T00:00:00","SaveCount":16,"SaveAddress":"F4000"},"StatusFWR":{"Version":"13.4.1.2(ca5a2d3-tasmota)","BuildDateTime":"2024.05.04 18:05:58","Boot":31,"Core":"2_7_6","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8285N08","CR":"351/699"},"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]},"StatusMEM":{"ProgramSize":648,"Free":352,"Heap":24,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":"DOUT","Features":["0407","8F9AC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","54000020","00000080","00000000"],"Drivers":"1,2,!3,!4,!5,!6,7,!8,9,10,12,!16,!18,!19,!20,!21,!22,!24,26,!27,29,!30,!35,!37,!45,62,!68","Sensors":"1,2,3,4,5,6","I2CDriver":"7"},"StatusNET":{"Hostname":"tasmota-BB24A7-1191","IPAddress":"0.0.0.0","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.1.1","DNSServer2":"0.0.0.0","Mac":"D8:F1:5B:BB:24:A7","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0},"StatusMQT":{"MqttHost":"","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_BB24A7","MqttUser":"DVES_USER","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4},"StatusTIM":{"UTC":"1970-01-01T00:00:05Z","Local":"1970-01-01T00:00:05","StartDST":"1970-01-01T00:00:00","EndDST":"1970-01-01T00:00:00","Timezone":"+00:00","Sunrise":"20:13","Sunset":"05:47"},"StatusSNS":{"Time":"1970-01-01T00:00:05"},"StatusSTS":{"Time":"1970-01-01T00:00:05","Uptime":"0T00:00:06","UptimeSec":6,"Heap":24,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"OFF"},"StatusSTK":{"Exception":28,"Reason":"Exception","EPC":["40258c32","00000000","00000000"],"EXCVADDR":"0047c264","DEPC":"00000000","CallChain":["402592f4","40259de5","402593be","402592f4","402597f3","402593be","40258b5d","40258b5d","4024695c","40101c5b","401019d3","40258ba0","40291824","40101c92","40258c24","402586c4","4024eee5","40291824","40101c5b","40251c6c","401019d3","4024efb0","402299f3","4025191c","40229bb0","402095b2","4028c825","4022dd3e","401019d3","40101c5b","402966bc"]}}```

[Ralla66]

@plotzkella sagte in Tasmota Web GUI nach Upgrade nicht mehr erreichbar:

"Hostname":"tasmota-BB24A7-1191","IPAddress":"0.0.0.0","Gateway":"192.168.1.1"

du hast den in deinem Netzwerk angemeldet ?

[plotzkella]

Nein, die Steckdose ist im AP-Modus. Bin gerade am rausfinden, wie ich über die http-Befehle in ein Wifi verbinde...

[Ralla66]

@plotzkella

hier

http://deine IP/cm?cmnd= danach das command

[haselchen]

@plotzkella

Der AP hat ne eigene IP
Normal klinkst du dich mit dem Handy drauf ein und verbindest die Steckdose DANN erst mit deinem WLAN

Der Access Point hat eine SSID in der Form "tasmota-xxxx". Der Internet Browser wird verwendet um unter der IP Adresse "192.168.4.1" die Konfigurationsoberfläche aufzurufen

[plotzkella]

So, habe es über die Befehle WifiTest geschafft, die Steckdose wieder ins WLAN zu bekommen; das ursprüngliche Problem bleibt aber, dass ich nicht mehr auf die WebUI komme.

Anbei der Status 0:

{"Status":{"Module":1,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"tasmota_BB24A7","ButtonTopic":"0","Power":"0","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0},"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota-DE.bin.gz","RestartReason":"Exception","Uptime":"0T00:06:36","StartupUTC":"","Sleep":50,"CfgHolder":4617,"BootCount":18,"BCResetTime":"1970-01-01T00:00:00","SaveCount":22,"SaveAddress":"F6000"},"StatusFWR":{"Version":"13.4.1.2(ca5a2d3-tasmota)","BuildDateTime":"2024.05.04 18:05:58","Boot":31,"Core":"2_7_6","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8285N08","CR":"370/699"},"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["CIA",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]},"StatusMEM":{"ProgramSize":648,"Free":352,"Heap":22,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":"DOUT","Features":["0407","8F9AC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","54000020","00000080","00000000"],"Drivers":"1,2,!3,!4,!5,!6,7,!8,9,10,12,!16,!18,!19,!20,!21,!22,!24,26,!27,29,!30,!35,!37,!45,62,!68","Sensors":"1,2,3,4,5,6","I2CDriver":"7"},"StatusNET":{"Hostname":"tasmota-BB24A7-1191","IPAddress":"10.10.10.140","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.1.1","DNSServer2":"0.0.0.0","Mac":"D8:F1:5B:BB:24:A7","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0},"StatusMQT":{"MqttHost":"","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_BB24A7","MqttUser":"DVES_USER","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4},"StatusTIM":{"UTC":"1970-01-01T00:06:34Z","Local":"1970-01-01T00:06:34","StartDST":"1970-01-01T00:00:00","EndDST":"1970-01-01T00:00:00","Timezone":"+00:00","Sunrise":"20:13","Sunset":"05:47"},"StatusSNS":{"Time":"1970-01-01T00:06:34"},"StatusSTS":{"Time":"1970-01-01T00:06:34","Uptime":"0T00:06:36","UptimeSec":396,"Heap":22,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":119,"MqttCount":0,"POWER":"OFF"},"StatusSTK":{"Exception":28,"Reason":"Exception","EPC":["40258c32","00000000","00000000"],"EXCVADDR":"0047c264","DEPC":"00000000","CallChain":["402592f4","40259de5","402593be","402592f4","402597f3","402593be","40258b5d","40258b5d","4024695c","40101c5b","401019d3","40258ba0","40291824","40101c92","40258c24","402586c4","4024eee5","40291824","40101c5b","40251c6c","401019d3","4024efb0","402299f3","4025191c","40229bb0","402095b2","4028c825","4022dd3e","401019d3","40101c5b","402966bc"]}}

[Ralla66]

@plotzkella sagte in Tasmota Web GUI nach Upgrade nicht mehr erreichbar:

"IPAddress":"10.10.10.140"

dann prüfe ob der Browser sperrt, moderne Browser ersetzen gerne automatisch
http mit https

[plotzkella]

@ralla66

Danke für den Input, habe ich bereits probiert. Auch schon drei verschiedene Browser (Chrome, Edge, Firefox)...

Firefox gibt als einziger eine Fehlermeldung zurück:

[Ralla66]

@plotzkella

schau im Router nach ob der in deinem Netzwerk steht und wie.

[plotzkella]

@ralla66

Danka, aber da ist wirklich alles ok. Ich kann ja über http und mqtt zugreifen und er akzeptiert auch alle befehle, nur das Web GUI lädt nicht mehr... Bei allen anderen Tasmotas und in meinem Netz funktioniert alles wie es soll. Netzwerkprobleme kann ich definitiv ausschließen.

[Ralla66]

@plotzkella

hatte ich bei den Gosund auch bei OTA, half meist eine andere .bin per OTA flashen oder
besser mal per FTDI den Speicher löschen.

[haselchen]

@plotzkella

Also …. hab es nur kurz überflogen .
Warum benutzt Du eine Unreleased Development Version?
Latest ist die 13.4.0
Und dann hast Du ein ESP8285 Board?!
Da gilt wohl auch noch ne Besonderheit.
Das heißt , da musste die richtige .bin erwischen .

[plotzkella]

Danke für Deinen Hinweis - der hat mich auf die richtige Fährte gebracht. Ich bin wohl versehentlich im Developer-Branch gelandet und konnte dann über Github herausfinden, dass mit der Version etwas nicht in Ordnung war. Bei Github hat mir jemand geholfen und ich bin jetzt wieder auf 13.4.0. Das Web-UI läuft wieder.

Danke an Euch für die spontane Hilfe!