SDA1 voll Home/IOBroker nach Node Update
-
Ok, der User war nicht Mitglied in sudo.
Jetzt hats geklappt.
Welcher Bereich der Ausgabe wird denn benötigt?
Hier mal ein Auszug bis zu den Adaptern:*** BASE SYSTEM *** Static hostname: IOBrokerhost Icon name: computer-vm Chassis: vm Virtualization: kvm Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.0-26-amd64 Architecture: x86-64 model name : Common KVM processor Docker : false Virtualization : kvm Kernel : x86_64 Userland : amd64 Systemuptime and Load: 00:22:17 up 1:11, 1 user, load average: 0.60, 0.50, 0.47 CPU threads: 12 *** Time and Time Zones *** Local time: Wed 2023-11-08 00:22:17 CET Universal time: Tue 2023-11-07 23:22:17 UTC RTC time: Tue 2023-11-07 23:22:18 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** deifel /home/deifel deifel cdrom floppy sudo audio dip video plugdev netdev *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 11G 6.8G 2.7G 0.0K 2.2G 4.6G Swap: 8.0G 0B 8.0G Total: 19G 6.8G 10G 11680 M total memory 6790 M used memory 573 M active memory 7728 M inactive memory 2665 M free memory 342 M buffer memory 1882 M swap cache 7997 M total swap 0 M used swap 7997 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 5.7G 0 5.7G 0% /dev tmpfs tmpfs 1.2G 588K 1.2G 1% /run /dev/sda1 ext4 24G 14G 8.5G 63% / tmpfs tmpfs 5.8G 0 5.8G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 1.2G 0 1.2G 0% /run/user/0 tmpfs tmpfs 1.2G 0 1.2G 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Nov 7 23:11:11 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [Tue Nov 7 23:11:11 2023] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,relatime,errors=remount-ro Files in neuralgic directories: /var: 5.2G /var/ 4.7G /var/log 2.4G /var/log/journal/65e07a91f8664c7a966da0df42f616fe 2.4G /var/log/journal 331M /var/cache Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 24K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.9G /opt/iobroker/iobroker-data/ 615M /opt/iobroker/iobroker-data/files 367M /opt/iobroker/iobroker-data/backup-objects 291M /opt/iobroker/iobroker-data/history 88M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 228M /opt/iobroker/iobroker-data/BSZExtLog_1_Oelverbrauch_Liter.csv 117M /opt/iobroker/iobroker-data/objects.jsonl 99M /opt/iobroker/iobroker-data/states.jsonl 58M /opt/iobroker/iobroker-data/objects.json.migrated 58M /opt/iobroker/iobroker-data/objects.json.bak.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S6J1O6-if00-port0 /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AB0LP1A8-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! invalid: samsungtv@0.0.0 /opt/iobroker/node_modules/samsungtv npm ERR! invalid: syno@3.0.0 /opt/iobroker/node_modules/syno npm ERR! invalid: socksv5@0.0.6 /opt/iobroker/node_modules/socksv5 npm ERR! invalid: xmlbuilder@0.4.2 /opt/iobroker/node_modules/xmlbuilder npm ERR! invalid: cli@1.0.1 /opt/iobroker/node_modules/cli npm ERR! missing: cliff@0.1.x, required by ipv6@3.1.1 npm ERR! A complete log of this run can be found in: /home/deifel/.npm/_logs/2023-11-07T23_22_18_923Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! A complete log of this run can be found in: /home/deifel/.npm/_logs/2023-11-07T23_22_26_500Z-debug-0.log Adapters from github: 1Immer vollständige Ausgaben posten.
Setz den User noch in die Gruppeadmrein.Und bring das nodesource-Repo auf Stand.
iob nodejs-update -
Danke! Habe ich beides gemacht. Keine Fehler o.ä.
Er hat mir dann das Update auf 18.18.2 angeboten. Habe ich gemacht.
Sonst ist Dir nichts aufgefallen? Dann würde ich das jetzt einfach mal beobachten.
Herzlichen Dank nochmals für die schnelle und kompetente Hilfe! -
zum thema großes /var/log/journal hier ein interessanter artikel
https://askubuntu.com/questions/1238214/big-var-log-journalevtl müsste man da aber auch mal reinschauen, was da soviel logs erzeugt
da ist sicherlich auch im betriebssystem noch was krummdie anderen Probleme die du noch hast, überlasse ich wieder den anderen
-
Danke! Habe ich beides gemacht. Keine Fehler o.ä.
Er hat mir dann das Update auf 18.18.2 angeboten. Habe ich gemacht.
Sonst ist Dir nichts aufgefallen? Dann würde ich das jetzt einfach mal beobachten.
Herzlichen Dank nochmals für die schnelle und kompetente Hilfe!@deifel sagte in SDA1 voll Home/IOBroker nach Node Update:
Sonst ist Dir nichts aufgefallen?
Poste halt vollständig, dann kann man sich das auch in Gänze anschauen.
-
Gerne. Hier das vollständige Log:
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: IOBrokerhost Icon name: computer-vm Chassis: vm Virtualization: kvm Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.0-26-amd64 Architecture: x86-64 model name : Common KVM processor Docker : false Virtualization : kvm Kernel : x86_64 Userland : amd64 Systemuptime and Load: 07:55:48 up 30 min, 1 user, load average: 0.27, 0.35, 0.50 CPU threads: 12 *** Time and Time Zones *** Local time: Wed 2023-11-08 07:55:48 CET Universal time: Wed 2023-11-08 06:55:48 UTC RTC time: Wed 2023-11-08 06:55:49 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** deifel /home/deifel deifel adm cdrom floppy sudo audio dip video plugdev netdev *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 11G 6.1G 4.8G 0.0K 799M 5.3G Swap: 8.0G 0B 8.0G Total: 19G 6.1G 12G 11680 M total memory 6087 M used memory 179 M active memory 6391 M inactive memory 4793 M free memory 67 M buffer memory 732 M swap cache 7997 M total swap 0 M used swap 7997 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 5.7G 0 5.7G 0% /dev tmpfs tmpfs 1.2G 572K 1.2G 1% /run /dev/sda1 ext4 24G 13G 9.8G 57% / tmpfs tmpfs 5.8G 0 5.8G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 1.2G 0 1.2G 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,relatime,errors=remount-ro Files in neuralgic directories: /var: 3.7G /var/ 3.2G /var/log 833M /var/log/journal/65e07a91f8664c7a966da0df42f616fe 833M /var/log/journal 360M /var/cache Archived and active journals take up 832.1M in the file system. /opt/iobroker/backups: 24K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 2.1G /opt/iobroker/iobroker-data/ 615M /opt/iobroker/iobroker-data/files 367M /opt/iobroker/iobroker-data/backup-objects 291M /opt/iobroker/iobroker-data/history 88M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 250M /opt/iobroker/iobroker-data/states.jsonl 228M /opt/iobroker/iobroker-data/BSZExtLog_1_Oelverbrauch_Liter.csv 142M /opt/iobroker/iobroker-data/objects.jsonl 58M /opt/iobroker/iobroker-data/objects.json.migrated 58M /opt/iobroker/iobroker-data/objects.json.bak.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S6J1O6-if00-port0 /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AB0LP1A8-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://deb.debian.org/debian-security bullseye-security/main amd64 P ackages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! invalid: samsungtv@0.0.0 /opt/iobroker/node_modules/samsungtv npm ERR! invalid: syno@3.0.0 /opt/iobroker/node_modules/syno npm ERR! invalid: socksv5@0.0.6 /opt/iobroker/node_modules/socksv5 npm ERR! invalid: xmlbuilder@0.4.2 /opt/iobroker/node_modules/xmlbuilder npm ERR! invalid: cli@1.0.1 /opt/iobroker/node_modules/cli npm ERR! missing: cliff@0.1.x, required by ipv6@3.1.1 npm ERR! A complete log of this run can be found in: /home/deifel/.npm/_logs/2023-11-08T06_55_51_252Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! A complete log of this run can be found in: /home/deifel/.npm/_logs/2023-11-08T06_55_58_943Z-debug-0.log Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : IOBrokerhost - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : IOBrokerhost - enabled + system.adapter.backitup.1 : backitup : IOBrokerhost - enabled + system.adapter.ble.0 : ble : IOBrokerhost - enabled system.adapter.daswetter.0 : daswetter : IOBrokerhost - enabled + system.adapter.discovery.0 : discovery : IOBrokerhost - enabled system.adapter.dwd.0 : dwd : IOBrokerhost - enabled + system.adapter.echarts.0 : echarts : IOBrokerhost - enabled + system.adapter.email.0 : email : IOBrokerhost - enabled system.adapter.eusec.0 : eusec : IOBrokerhost - disabled system.adapter.feiertage.0 : feiertage : IOBrokerhost - enabled system.adapter.flot.0 : flot : IOBrokerhost - enabled + system.adapter.govee.0 : govee : IOBrokerhost - enabled + system.adapter.history.0 : history : IOBrokerhost - enabled + system.adapter.hm-rega.0 : hm-rega : IOBrokerhost - enabled + system.adapter.hm-rpc.0 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.homeconnect.1 : homeconnect : IOBrokerhost - enabled + system.adapter.hue.0 : hue : IOBrokerhost - enabled, port: 443 system.adapter.ical.0 : ical : IOBrokerhost - enabled system.adapter.ico-cloud.0 : ico-cloud : IOBrokerhost - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: IOBrokerhost - enabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : IOBrokerhost - enabled system.adapter.icons-icons8.0 : icons-icons8 : IOBrokerhost - enabled system.adapter.icons-material-png.0 : icons-material-png : IOBrokerhost - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : IOBrokerhost - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : IOBrokerhost - enabled + system.adapter.info.0 : info : IOBrokerhost - enabled + system.adapter.iot.0 : iot : IOBrokerhost - enabled + system.adapter.iqontrol.0 : iqontrol : IOBrokerhost - enabled + system.adapter.javascript.0 : javascript : IOBrokerhost - enabled system.adapter.material.0 : material : IOBrokerhost - enabled + system.adapter.mbus.0 : mbus : raspberrypikeller - enabled, port: 3493 + system.adapter.mbus.1 : mbus : IOBrokerhost - enabled, port: 3493 + system.adapter.mbus.2 : mbus : IOBrokerhost - enabled, port: 3493 + system.adapter.melcloud.0 : melcloud : IOBrokerhost - enabled + system.adapter.mihome-vacuum.1 : mihome-vacuum : IOBrokerhost - enabled, port: 54321 + system.adapter.mihome-vacuum.2 : mihome-vacuum : IOBrokerhost - enabled, port: 54321 + system.adapter.mihome.0 : mihome : IOBrokerhost - enabled, port: 9898, bind: 0.0.0.0 + system.adapter.milight.0 : milight : IOBrokerhost - enabled, port: 5987 system.adapter.mqtt.0 : mqtt : IOBrokerhost - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.musiccast.0 : musiccast : IOBrokerhost - enabled system.adapter.openweathermap.0 : openweathermap : IOBrokerhost - enabled + system.adapter.ping.0 : ping : IOBrokerhost - enabled + system.adapter.pollenflug.0 : pollenflug : IOBrokerhost - enabled + system.adapter.samsung.0 : samsung : IOBrokerhost - enabled + system.adapter.scenes.0 : scenes : IOBrokerhost - enabled + system.adapter.shelly.0 : shelly : IOBrokerhost - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.smartgarden.0 : smartgarden : IOBrokerhost - enabled + system.adapter.smartthings.0 : smartthings : IOBrokerhost - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : IOBrokerhost - enabled + system.adapter.synology.0 : synology : IOBrokerhost - enabled, port: 5001 + system.adapter.telegram.0 : telegram : IOBrokerhost - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tibberlink.0 : tibberlink : IOBrokerhost - enabled + system.adapter.trashschedule.0 : trashschedule : IOBrokerhost - enabled + system.adapter.unifi.0 : unifi : IOBrokerhost - enabled + system.adapter.velux.0 : velux : IOBrokerhost - enabled system.adapter.viessmannapi.0 : viessmannapi : IOBrokerhost - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : IOBrokerhost - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : IOBrokerhost - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : IOBrokerhost - enabled system.adapter.vis-justgage.0 : vis-justgage : IOBrokerhost - enabled system.adapter.vis-keyboard.0 : vis-keyboard : IOBrokerhost - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : IOBrokerhost - enabled system.adapter.vis.0 : vis : IOBrokerhost - disabled + system.adapter.web.0 : web : IOBrokerhost - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wifilight.0 : wifilight : IOBrokerhost - enabled + system.adapter.worx.0 : worx : IOBrokerhost - enabled + system.adapter.yeelight-2.0 : yeelight-2 : IOBrokerhost - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : IOBrokerhost - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.hue.0 : hue : IOBrokerhost - enabled, port: 443 + system.adapter.mbus.0 : mbus : raspberrypikeller - enabled, port: 3493 + system.adapter.mbus.1 : mbus : IOBrokerhost - enabled, port: 3493 + system.adapter.mbus.2 : mbus : IOBrokerhost - enabled, port: 3493 + system.adapter.mihome-vacuum.1 : mihome-vacuum : IOBrokerhost - enabled, port: 54321 + system.adapter.mihome-vacuum.2 : mihome-vacuum : IOBrokerhost - enabled, port: 54321 + system.adapter.mihome.0 : mihome : IOBrokerhost - enabled, port: 9898, bind: 0.0.0.0 + system.adapter.milight.0 : milight : IOBrokerhost - enabled, port: 5987 + system.adapter.shelly.0 : shelly : IOBrokerhost - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.synology.0 : synology : IOBrokerhost - enabled, port: 5001 + system.adapter.telegram.0 : telegram : IOBrokerhost - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : IOBrokerhost - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.25.5 , installed 3.25.5 Adapter "amazon-dash" : 1.2.0 , installed 1.2.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "ble" : 0.13.4 , installed 0.13.4 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "eusec" : 1.1.2 , installed 1.1.2 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "homeconnect" : 1.1.1 , installed 1.1.1 Adapter "hue" : 3.10.1 , installed 3.10.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "ico-cloud" : 1.1.0 , installed 1.1.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 1.14.5 , installed 2.0.3 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "mbus" : 2.4.0 , installed 2.4.0 Adapter "melcloud" : 1.3.5 , installed 1.3.5 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "milight" : 0.4.0 , installed 0.4.0 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mqtt-client" : 1.6.5 , installed 1.6.5 Adapter "musiccast" : 1.1.3 , installed 1.1.3 Adapter "openweathermap": 0.3.9 , installed 0.3.9 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "radar2" : 2.0.8 , installed 2.0.8 Adapter "samsung" : 0.5.11 , installed 0.5.11 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.4.5 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "smartthings" : 0.0.4 , installed 0.0.4 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "synology" : 3.0.1 , installed 3.0.1 Adapter "telegram" : 2.0.1 , installed 2.0.1 Adapter "tibberlink" : 1.4.1 , installed 1.4.1 Adapter "trashschedule": 2.3.0 , installed 2.3.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "velux" : 0.0.7 , installed 0.0.7 Adapter "viessmannapi" : 2.3.0 , installed 2.3.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 6.1.4 , installed 6.1.4 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yeelight-2" : 1.2.1 , installed 1.2.1 Objects and States Please stand by - This may take a while Objects: 201968 States: 154142 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://deb.debian.org/debian bullseye-backports InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.1.172:2001 0.0.0.0:* LISTEN 1001 1904 945/io.hm-rpc.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12655 784/sshd: /usr/sbin tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 10801 737/exim4 tcp 0 0 192.168.1.172:2010 0.0.0.0:* LISTEN 1001 11161 1013/io.hm-rpc.2 tcp 0 0 192.168.1.172:8701 0.0.0.0:* LISTEN 1001 1923 1006/io.hm-rpc.1 tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 14898 448/iobroker.js-con tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 14891 448/iobroker.js-con tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 12347 1/init tcp6 0 0 :::8081 :::* LISTEN 1001 1734 813/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 13121 1161/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 12657 784/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 10802 737/exim4 tcp6 0 0 :::111 :::* LISTEN 0 12351 1/init udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 16642 1072/io.mihome-vacu udp 0 0 0.0.0.0:53423 0.0.0.0:* 1001 16569 995/io.mihome-vacuu udp 0 0 0.0.0.0:54015 0.0.0.0:* 1001 20596 1109/io.shelly.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 107 10753 443/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 20244 1109/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 11491 350/dhclient udp 0 0 0.0.0.0:111 0.0.0.0:* 0 12348 1/init udp 0 0 0.0.0.0:41100 0.0.0.0:* 1001 22108 1409/io.musiccast.0 udp 0 0 0.0.0.0:41946 0.0.0.0:* 1001 2022 1172/io.milight.0 udp 0 0 0.0.0.0:58348 0.0.0.0:* 107 10755 443/avahi-daemon: r udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 11788 984/io.mihome.0 udp6 0 0 :::5353 :::* 107 10754 443/avahi-daemon: r udp6 0 0 :::54731 :::* 107 10756 443/avahi-daemon: r udp6 0 0 :::111 :::* 0 12354 1/init *** Log File - Last 25 Lines *** 2023-11-08 07:56:46.489 - warn: mbus.2 (1727) M-Bus ID 1 err: Error: Error: Failed to send/receive M-Bus request frame[1]. 2023-11-08 07:56:46.489 - warn: mbus.2 (1727) M-Bus Devices with errors: 2 from 2 2023-11-08 07:56:46.489 - error: mbus.2 (1727) All M-Bus devices could not be read, reinitialize and start over 2023-11-08 07:56:46.491 - info: mbus.2 (1727) Default Update Interval: 3600 2023-11-08 07:56:46.491 - info: mbus.2 (1727) Initialize M-Bus Serial to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S6J1O6-if00-port0 with 115200baud 2023-11-08 07:56:46.496 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 1 with update interval 3600 2023-11-08 07:56:46.496 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 12841572496A0016 with update interval 3600 2023-11-08 07:56:48.596 - error: govee.0 (1609) AxiosError: Request failed with status code 400 2023-11-08 07:56:48.705 - error: govee.0 (1609) AxiosError: Request failed with status code 400 2023-11-08 07:56:48.768 - info: govee.0 (1609) State value to set for "govee.0.93:34:A4:C1:38:38:76:E9.online" has to be type "boolean" but received type "string" 2023-11-08 07:56:48.805 - info: govee.0 (1609) State value to set for "govee.0.1C:A6:EA:5A:5F:DB:B4:F7.online" has to be type "boolean" but received type "string" 2023-11-08 07:56:49.241 - warn: mbus.2 (1727) M-Bus ID 1 err: Error: Error: Failed to send/receive M-Bus request frame[1]. 2023-11-08 07:56:49.241 - warn: mbus.2 (1727) M-Bus Devices with errors: 2 from 2 2023-11-08 07:56:49.241 - error: mbus.2 (1727) All M-Bus devices could not be read, reinitialize and start over 2023-11-08 07:56:49.243 - info: mbus.2 (1727) Default Update Interval: 3600 2023-11-08 07:56:49.243 - info: mbus.2 (1727) Initialize M-Bus Serial to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S6J1O6-if00-port0 with 115200baud 2023-11-08 07:56:49.247 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 1 with update interval 3600 2023-11-08 07:56:49.247 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 12841572496A0016 with update interval 3600 2023-11-08 07:56:51.993 - warn: mbus.2 (1727) M-Bus ID 1 err: Error: Error: Failed to send/receive M-Bus request frame[1]. 2023-11-08 07:56:51.993 - warn: mbus.2 (1727) M-Bus Devices with errors: 2 from 2 2023-11-08 07:56:51.993 - error: mbus.2 (1727) All M-Bus devices could not be read, reinitialize and start over 2023-11-08 07:56:51.995 - info: mbus.2 (1727) Default Update Interval: 3600 2023-11-08 07:56:51.995 - info: mbus.2 (1727) Initialize M-Bus Serial to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S6J1O6-if00-port0 with 115200baud 2023-11-08 07:56:51.999 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 1 with update interval 3600 2023-11-08 07:56:51.999 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 12841572496A0016 with update interval 3600============ Mark until here for C&P =============
-
Gerne. Hier das vollständige Log:
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: IOBrokerhost Icon name: computer-vm Chassis: vm Virtualization: kvm Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.0-26-amd64 Architecture: x86-64 model name : Common KVM processor Docker : false Virtualization : kvm Kernel : x86_64 Userland : amd64 Systemuptime and Load: 07:55:48 up 30 min, 1 user, load average: 0.27, 0.35, 0.50 CPU threads: 12 *** Time and Time Zones *** Local time: Wed 2023-11-08 07:55:48 CET Universal time: Wed 2023-11-08 06:55:48 UTC RTC time: Wed 2023-11-08 06:55:49 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** deifel /home/deifel deifel adm cdrom floppy sudo audio dip video plugdev netdev *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 11G 6.1G 4.8G 0.0K 799M 5.3G Swap: 8.0G 0B 8.0G Total: 19G 6.1G 12G 11680 M total memory 6087 M used memory 179 M active memory 6391 M inactive memory 4793 M free memory 67 M buffer memory 732 M swap cache 7997 M total swap 0 M used swap 7997 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 5.7G 0 5.7G 0% /dev tmpfs tmpfs 1.2G 572K 1.2G 1% /run /dev/sda1 ext4 24G 13G 9.8G 57% / tmpfs tmpfs 5.8G 0 5.8G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 1.2G 0 1.2G 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,relatime,errors=remount-ro Files in neuralgic directories: /var: 3.7G /var/ 3.2G /var/log 833M /var/log/journal/65e07a91f8664c7a966da0df42f616fe 833M /var/log/journal 360M /var/cache Archived and active journals take up 832.1M in the file system. /opt/iobroker/backups: 24K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 2.1G /opt/iobroker/iobroker-data/ 615M /opt/iobroker/iobroker-data/files 367M /opt/iobroker/iobroker-data/backup-objects 291M /opt/iobroker/iobroker-data/history 88M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 250M /opt/iobroker/iobroker-data/states.jsonl 228M /opt/iobroker/iobroker-data/BSZExtLog_1_Oelverbrauch_Liter.csv 142M /opt/iobroker/iobroker-data/objects.jsonl 58M /opt/iobroker/iobroker-data/objects.json.migrated 58M /opt/iobroker/iobroker-data/objects.json.bak.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S6J1O6-if00-port0 /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AB0LP1A8-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://deb.debian.org/debian-security bullseye-security/main amd64 P ackages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! invalid: samsungtv@0.0.0 /opt/iobroker/node_modules/samsungtv npm ERR! invalid: syno@3.0.0 /opt/iobroker/node_modules/syno npm ERR! invalid: socksv5@0.0.6 /opt/iobroker/node_modules/socksv5 npm ERR! invalid: xmlbuilder@0.4.2 /opt/iobroker/node_modules/xmlbuilder npm ERR! invalid: cli@1.0.1 /opt/iobroker/node_modules/cli npm ERR! missing: cliff@0.1.x, required by ipv6@3.1.1 npm ERR! A complete log of this run can be found in: /home/deifel/.npm/_logs/2023-11-08T06_55_51_252Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! A complete log of this run can be found in: /home/deifel/.npm/_logs/2023-11-08T06_55_58_943Z-debug-0.log Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : IOBrokerhost - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : IOBrokerhost - enabled + system.adapter.backitup.1 : backitup : IOBrokerhost - enabled + system.adapter.ble.0 : ble : IOBrokerhost - enabled system.adapter.daswetter.0 : daswetter : IOBrokerhost - enabled + system.adapter.discovery.0 : discovery : IOBrokerhost - enabled system.adapter.dwd.0 : dwd : IOBrokerhost - enabled + system.adapter.echarts.0 : echarts : IOBrokerhost - enabled + system.adapter.email.0 : email : IOBrokerhost - enabled system.adapter.eusec.0 : eusec : IOBrokerhost - disabled system.adapter.feiertage.0 : feiertage : IOBrokerhost - enabled system.adapter.flot.0 : flot : IOBrokerhost - enabled + system.adapter.govee.0 : govee : IOBrokerhost - enabled + system.adapter.history.0 : history : IOBrokerhost - enabled + system.adapter.hm-rega.0 : hm-rega : IOBrokerhost - enabled + system.adapter.hm-rpc.0 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.homeconnect.1 : homeconnect : IOBrokerhost - enabled + system.adapter.hue.0 : hue : IOBrokerhost - enabled, port: 443 system.adapter.ical.0 : ical : IOBrokerhost - enabled system.adapter.ico-cloud.0 : ico-cloud : IOBrokerhost - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: IOBrokerhost - enabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : IOBrokerhost - enabled system.adapter.icons-icons8.0 : icons-icons8 : IOBrokerhost - enabled system.adapter.icons-material-png.0 : icons-material-png : IOBrokerhost - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : IOBrokerhost - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : IOBrokerhost - enabled + system.adapter.info.0 : info : IOBrokerhost - enabled + system.adapter.iot.0 : iot : IOBrokerhost - enabled + system.adapter.iqontrol.0 : iqontrol : IOBrokerhost - enabled + system.adapter.javascript.0 : javascript : IOBrokerhost - enabled system.adapter.material.0 : material : IOBrokerhost - enabled + system.adapter.mbus.0 : mbus : raspberrypikeller - enabled, port: 3493 + system.adapter.mbus.1 : mbus : IOBrokerhost - enabled, port: 3493 + system.adapter.mbus.2 : mbus : IOBrokerhost - enabled, port: 3493 + system.adapter.melcloud.0 : melcloud : IOBrokerhost - enabled + system.adapter.mihome-vacuum.1 : mihome-vacuum : IOBrokerhost - enabled, port: 54321 + system.adapter.mihome-vacuum.2 : mihome-vacuum : IOBrokerhost - enabled, port: 54321 + system.adapter.mihome.0 : mihome : IOBrokerhost - enabled, port: 9898, bind: 0.0.0.0 + system.adapter.milight.0 : milight : IOBrokerhost - enabled, port: 5987 system.adapter.mqtt.0 : mqtt : IOBrokerhost - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.musiccast.0 : musiccast : IOBrokerhost - enabled system.adapter.openweathermap.0 : openweathermap : IOBrokerhost - enabled + system.adapter.ping.0 : ping : IOBrokerhost - enabled + system.adapter.pollenflug.0 : pollenflug : IOBrokerhost - enabled + system.adapter.samsung.0 : samsung : IOBrokerhost - enabled + system.adapter.scenes.0 : scenes : IOBrokerhost - enabled + system.adapter.shelly.0 : shelly : IOBrokerhost - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.smartgarden.0 : smartgarden : IOBrokerhost - enabled + system.adapter.smartthings.0 : smartthings : IOBrokerhost - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : IOBrokerhost - enabled + system.adapter.synology.0 : synology : IOBrokerhost - enabled, port: 5001 + system.adapter.telegram.0 : telegram : IOBrokerhost - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tibberlink.0 : tibberlink : IOBrokerhost - enabled + system.adapter.trashschedule.0 : trashschedule : IOBrokerhost - enabled + system.adapter.unifi.0 : unifi : IOBrokerhost - enabled + system.adapter.velux.0 : velux : IOBrokerhost - enabled system.adapter.viessmannapi.0 : viessmannapi : IOBrokerhost - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : IOBrokerhost - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : IOBrokerhost - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : IOBrokerhost - enabled system.adapter.vis-justgage.0 : vis-justgage : IOBrokerhost - enabled system.adapter.vis-keyboard.0 : vis-keyboard : IOBrokerhost - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : IOBrokerhost - enabled system.adapter.vis.0 : vis : IOBrokerhost - disabled + system.adapter.web.0 : web : IOBrokerhost - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wifilight.0 : wifilight : IOBrokerhost - enabled + system.adapter.worx.0 : worx : IOBrokerhost - enabled + system.adapter.yeelight-2.0 : yeelight-2 : IOBrokerhost - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : IOBrokerhost - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : IOBrokerhost - enabled, port: 0 + system.adapter.hue.0 : hue : IOBrokerhost - enabled, port: 443 + system.adapter.mbus.0 : mbus : raspberrypikeller - enabled, port: 3493 + system.adapter.mbus.1 : mbus : IOBrokerhost - enabled, port: 3493 + system.adapter.mbus.2 : mbus : IOBrokerhost - enabled, port: 3493 + system.adapter.mihome-vacuum.1 : mihome-vacuum : IOBrokerhost - enabled, port: 54321 + system.adapter.mihome-vacuum.2 : mihome-vacuum : IOBrokerhost - enabled, port: 54321 + system.adapter.mihome.0 : mihome : IOBrokerhost - enabled, port: 9898, bind: 0.0.0.0 + system.adapter.milight.0 : milight : IOBrokerhost - enabled, port: 5987 + system.adapter.shelly.0 : shelly : IOBrokerhost - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.synology.0 : synology : IOBrokerhost - enabled, port: 5001 + system.adapter.telegram.0 : telegram : IOBrokerhost - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : IOBrokerhost - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.25.5 , installed 3.25.5 Adapter "amazon-dash" : 1.2.0 , installed 1.2.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "ble" : 0.13.4 , installed 0.13.4 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "eusec" : 1.1.2 , installed 1.1.2 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "homeconnect" : 1.1.1 , installed 1.1.1 Adapter "hue" : 3.10.1 , installed 3.10.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "ico-cloud" : 1.1.0 , installed 1.1.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 1.14.5 , installed 2.0.3 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "mbus" : 2.4.0 , installed 2.4.0 Adapter "melcloud" : 1.3.5 , installed 1.3.5 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "milight" : 0.4.0 , installed 0.4.0 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mqtt-client" : 1.6.5 , installed 1.6.5 Adapter "musiccast" : 1.1.3 , installed 1.1.3 Adapter "openweathermap": 0.3.9 , installed 0.3.9 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "radar2" : 2.0.8 , installed 2.0.8 Adapter "samsung" : 0.5.11 , installed 0.5.11 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.4.5 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "smartthings" : 0.0.4 , installed 0.0.4 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "synology" : 3.0.1 , installed 3.0.1 Adapter "telegram" : 2.0.1 , installed 2.0.1 Adapter "tibberlink" : 1.4.1 , installed 1.4.1 Adapter "trashschedule": 2.3.0 , installed 2.3.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "velux" : 0.0.7 , installed 0.0.7 Adapter "viessmannapi" : 2.3.0 , installed 2.3.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 6.1.4 , installed 6.1.4 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yeelight-2" : 1.2.1 , installed 1.2.1 Objects and States Please stand by - This may take a while Objects: 201968 States: 154142 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://deb.debian.org/debian bullseye-backports InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.1.172:2001 0.0.0.0:* LISTEN 1001 1904 945/io.hm-rpc.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12655 784/sshd: /usr/sbin tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 10801 737/exim4 tcp 0 0 192.168.1.172:2010 0.0.0.0:* LISTEN 1001 11161 1013/io.hm-rpc.2 tcp 0 0 192.168.1.172:8701 0.0.0.0:* LISTEN 1001 1923 1006/io.hm-rpc.1 tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 14898 448/iobroker.js-con tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 14891 448/iobroker.js-con tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 12347 1/init tcp6 0 0 :::8081 :::* LISTEN 1001 1734 813/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 13121 1161/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 12657 784/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 10802 737/exim4 tcp6 0 0 :::111 :::* LISTEN 0 12351 1/init udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 16642 1072/io.mihome-vacu udp 0 0 0.0.0.0:53423 0.0.0.0:* 1001 16569 995/io.mihome-vacuu udp 0 0 0.0.0.0:54015 0.0.0.0:* 1001 20596 1109/io.shelly.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 107 10753 443/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 20244 1109/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 11491 350/dhclient udp 0 0 0.0.0.0:111 0.0.0.0:* 0 12348 1/init udp 0 0 0.0.0.0:41100 0.0.0.0:* 1001 22108 1409/io.musiccast.0 udp 0 0 0.0.0.0:41946 0.0.0.0:* 1001 2022 1172/io.milight.0 udp 0 0 0.0.0.0:58348 0.0.0.0:* 107 10755 443/avahi-daemon: r udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 11788 984/io.mihome.0 udp6 0 0 :::5353 :::* 107 10754 443/avahi-daemon: r udp6 0 0 :::54731 :::* 107 10756 443/avahi-daemon: r udp6 0 0 :::111 :::* 0 12354 1/init *** Log File - Last 25 Lines *** 2023-11-08 07:56:46.489 - warn: mbus.2 (1727) M-Bus ID 1 err: Error: Error: Failed to send/receive M-Bus request frame[1]. 2023-11-08 07:56:46.489 - warn: mbus.2 (1727) M-Bus Devices with errors: 2 from 2 2023-11-08 07:56:46.489 - error: mbus.2 (1727) All M-Bus devices could not be read, reinitialize and start over 2023-11-08 07:56:46.491 - info: mbus.2 (1727) Default Update Interval: 3600 2023-11-08 07:56:46.491 - info: mbus.2 (1727) Initialize M-Bus Serial to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S6J1O6-if00-port0 with 115200baud 2023-11-08 07:56:46.496 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 1 with update interval 3600 2023-11-08 07:56:46.496 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 12841572496A0016 with update interval 3600 2023-11-08 07:56:48.596 - error: govee.0 (1609) AxiosError: Request failed with status code 400 2023-11-08 07:56:48.705 - error: govee.0 (1609) AxiosError: Request failed with status code 400 2023-11-08 07:56:48.768 - info: govee.0 (1609) State value to set for "govee.0.93:34:A4:C1:38:38:76:E9.online" has to be type "boolean" but received type "string" 2023-11-08 07:56:48.805 - info: govee.0 (1609) State value to set for "govee.0.1C:A6:EA:5A:5F:DB:B4:F7.online" has to be type "boolean" but received type "string" 2023-11-08 07:56:49.241 - warn: mbus.2 (1727) M-Bus ID 1 err: Error: Error: Failed to send/receive M-Bus request frame[1]. 2023-11-08 07:56:49.241 - warn: mbus.2 (1727) M-Bus Devices with errors: 2 from 2 2023-11-08 07:56:49.241 - error: mbus.2 (1727) All M-Bus devices could not be read, reinitialize and start over 2023-11-08 07:56:49.243 - info: mbus.2 (1727) Default Update Interval: 3600 2023-11-08 07:56:49.243 - info: mbus.2 (1727) Initialize M-Bus Serial to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S6J1O6-if00-port0 with 115200baud 2023-11-08 07:56:49.247 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 1 with update interval 3600 2023-11-08 07:56:49.247 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 12841572496A0016 with update interval 3600 2023-11-08 07:56:51.993 - warn: mbus.2 (1727) M-Bus ID 1 err: Error: Error: Failed to send/receive M-Bus request frame[1]. 2023-11-08 07:56:51.993 - warn: mbus.2 (1727) M-Bus Devices with errors: 2 from 2 2023-11-08 07:56:51.993 - error: mbus.2 (1727) All M-Bus devices could not be read, reinitialize and start over 2023-11-08 07:56:51.995 - info: mbus.2 (1727) Default Update Interval: 3600 2023-11-08 07:56:51.995 - info: mbus.2 (1727) Initialize M-Bus Serial to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9S6J1O6-if00-port0 with 115200baud 2023-11-08 07:56:51.999 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 1 with update interval 3600 2023-11-08 07:56:51.999 - info: mbus.2 (1727) Schedule initialization for M-Bus-ID 12841572496A0016 with update interval 3600============ Mark until here for C&P =============
@deifel sagte in SDA1 voll Home/IOBroker nach Node Update:
*** Time and Time Zones ***
Local time: Wed 2023-11-08 07:55:48 CET
Universal time: Wed 2023-11-08 06:55:48 UTCKann es sein, dass deine Uhr eine Stunde nachgeht?
Boot Target: graphical.target
Stell das auf multi-user.target um:
sudo systemctl set-defautl multi-user.targetSwap: 8.0G
Das ist in meinen Augen etwas zu viel des Guten .
invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee
Den nochmal installieren oder einen der beiden anderen govee-Adapter verwenden. Der scheint mir auch verwaist zu sein.
Ähnliches gilt für den:
invalid: samsungtv@0.0.0 /opt/iobroker/node_modules/samsungtv
Schau mal ob da nicht eine der Alternativen funktioniert.
Adapter "shelly" : 6.6.1 , installed 6.4.5 [Updatable]
Bring den nach Möglichkeit auf einen aktuellen Stand.
mbus.2
Schau dir die Instanz mbus.2 an. Der scheint irgendwas zu fehlen. Die meckert alle 2 Sekunden herum und bläht das Log auf.
-
Vielen Dank.
Also Uhrzeit habe ich kontrolliert, die stimmt.
Shelly Adapter habe ich aktualisiert.
Das mit dem MBUS ist bekannt. Habe dazu einen eigenen Thread aufgemacht, damit ich das mal in den Griff bekomme.
Govee habe ich den neuen Adapter installiert (Govee App). Danke für den Hinweis!
Samsung Adapter habe ich gelöscht, wird nicht benötigt.
Wie kann ich denn den Swap ändern? -
Vielen Dank.
Also Uhrzeit habe ich kontrolliert, die stimmt.
Shelly Adapter habe ich aktualisiert.
Das mit dem MBUS ist bekannt. Habe dazu einen eigenen Thread aufgemacht, damit ich das mal in den Griff bekomme.
Govee habe ich den neuen Adapter installiert (Govee App). Danke für den Hinweis!
Samsung Adapter habe ich gelöscht, wird nicht benötigt.
Wie kann ich denn den Swap ändern?@deifel sagte in SDA1 voll Home/IOBroker nach Node Update:
Also Uhrzeit habe ich kontrolliert, die stimmt.
welche Uhrzeit stimmt? wie kontrolliert?
@deifel sagte in SDA1 voll Home/IOBroker nach Node Update:
Das mit dem MBUS ist bekannt.
dann ggf. die Logstufe der Instanz anpassen, um das log zu entlasten
-
@deifel sagte in SDA1 voll Home/IOBroker nach Node Update:
Also Uhrzeit habe ich kontrolliert, die stimmt.
welche Uhrzeit stimmt? wie kontrolliert?
@deifel sagte in SDA1 voll Home/IOBroker nach Node Update:
Das mit dem MBUS ist bekannt.
dann ggf. die Logstufe der Instanz anpassen, um das log zu entlasten
Habe das iob diag nochmals laufen lassen.
Hier sehe ich folgendes bei der Zeitzone:*** Time and Time Zones *** Local time: Wed 2023-11-08 10:05:40 CET Universal time: Wed 2023-11-08 09:05:40 UTC RTC time: Wed 2023-11-08 09:05:41 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: noDie lokale Uhrzeit stimmt mit der aktuellen überein. Dann sollte es doch passen, oder habe ich einen Denkfehler?
Logstufe ist angepasst :)
Die Größe der Swap-Datei würde ich gerne noch verringern, weiß aber leider nicht, wie. -
Habe das iob diag nochmals laufen lassen.
Hier sehe ich folgendes bei der Zeitzone:*** Time and Time Zones *** Local time: Wed 2023-11-08 10:05:40 CET Universal time: Wed 2023-11-08 09:05:40 UTC RTC time: Wed 2023-11-08 09:05:41 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: noDie lokale Uhrzeit stimmt mit der aktuellen überein. Dann sollte es doch passen, oder habe ich einen Denkfehler?
Logstufe ist angepasst :)
Die Größe der Swap-Datei würde ich gerne noch verringern, weiß aber leider nicht, wie.Das SWAP-File ist nicht ganz trivial, aber auch nicht hyperkomplex. Hier wird es beschrieben:
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden523
Online32.8k
Benutzer82.9k
Themen1.3m
Beiträge