Nach Update läuft nichts mehr!
-
pi@RaspberryPi4:~ $ sudo apt full-upgrade Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Paketaktualisierung (Upgrade) wird berechnet... Fertig Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: bsdmainutils g++-8 geoip-database libbind9-161 libcroco3 libdns1104 libdns1110 libevent-2.1-6 libfl2 libgdk-pixbuf2.0-0 libgeoip1 libicu63 libisc1100 libisc1105 libisccc161 libisccfg163 libisl19 libjim0.77 libjsoncpp1 liblwres161 libmpdec2 libncursesw5 libperl5.28 libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib libpython3.7 libpython3.7-minimal libpython3.7-stdlib libstdc++-8-dev libusb-0.1-4 perl-modules-5.28 python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal python3.7-minimal raspinfo usb.ids Verwenden Sie »sudo apt autoremove«, um sie zu entfernen. Die folgenden Pakete werden ENTFERNT: libgcc1 libpcre2-posix0 libpolkit-backend-1-0 libpython-dev libpython-stdlib python python-dev python-minimal python-rpi.gpio python3.7 Die folgenden NEUEN Pakete werden installiert: alsa-topology-conf alsa-ucm-conf bind9-libs bsdextrautils cpp-10 dos2unix g++-10 gcc-10 gcc-10-base gcc-9-base kms++-utils libapt-pkg6.0 libasan6 libatopology2 libboost-regex1.71.0 libboost-regex1.74.0 libbpf0 libbrotli-dev libbrotli1 libc-devtools libcbor0 libcrypt-dev libcrypt1 libctf-nobfd0 libctf0 libdatrie-dev libdebuginfod1 libdeflate0 libdns-export1110 libdns1110 libdrm-common libdrm-omap1 libdrm2 libevent-2.1-7 libfdt1 libffi7 libfido2-1 libfmt7 libfontconfig-dev libfreetype-dev libgcc-10-dev libgcc-s1 libgd3 libgdk-pixbuf-2.0-0 libgdk-pixbuf-2.0-dev libgdk-pixbuf-xlib-2.0-0 libgdk-pixbuf-xlib-2.0-dev libhogweed6 libicu67 libip4tc2 libip6tc2 libisc-export1105 libisc1105 libisl23 libjim0.79 libjson-c5 libjsoncpp24 libkms++0 libmaxminddb0 libmd0 libmpdec3 libnettle8 libnsl-dev libnsl2 libnss-nis libnss-nisplus libpcre2-16-0 libpcre2-32-0 libpcre2-dev libpcre2-posix2 libperl5.32 libprocps8 libpython3.9 libpython3.9-minimal libpython3.9-stdlib libreadline8 libsource-highlight-common libsource-highlight4v5 libstdc++-10-dev libtevent0 libthai-dev libtirpc-dev libxpm4 libxxhash0 libyaml-0-2 logsave mailcap media-types mksh ncal pci.ids perl-modules-5.32 python3-distro python3-toml python3.9 python3.9-minimal raspi-utils rng-tools-debian runit-helper systemd-timesyncd userconf-pi vcdbg Die folgenden Pakete werden aktualisiert (Upgrade): acl alsa-utils apt apt-listchanges apt-utils avahi-daemon base-files base-passwd bash bash-completion bind9-host binutils binutils-arm-linux-gnueabihf binutils-common bluez bluez-firmware bsdmainutils bsdutils build-essential busybox bzip2 ca-certificates cifs-utils cmake cmake-data console-setup console-setup-linux coreutils cpio cpp cpp-8 crda cron curl dash dbus dc debconf debconf-i18n debconf-utils debianutils device-tree-compiler dhcpcd5 diffutils dirmngr distro-info-data dmidecode dmsetup dosfstools dphys-swapfile dpkg dpkg-dev e2fsprogs ed ethtool fake-hwclock fakeroot fbset fdisk file findutils firmware-atheros firmware-brcm80211 firmware-libertas firmware-misc-nonfree firmware-realtek flashrom fontconfig fontconfig-config fonts-dejavu-core fuse g++ g++-8 gcc gcc-7-base gcc-8 gcc-8-base gdb gdbm-l10n geoip-database gettext-base gir1.2-freedesktop gir1.2-gdkpixbuf-2.0 gir1.2-glib-2.0 gir1.2-harfbuzz-0.0 gir1.2-pango-1.0 gir1.2-rsvg-2.0 git git-man gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv grep groff-base gzip hardlink hostname htop i2c-tools icu-devtools ifupdown info init init-system-helpers initramfs-tools initramfs-tools-core install-info iproute2 iptables iputils-ping isc-dhcp-client isc-dhcp-common iso-codes iw kbd keyboard-configuration keyutils klibc-utils kmod less libacl1 libalgorithm-diff-perl libalgorithm-diff-xs-perl libapparmor1 libarchive13 libasan5 libasound2 libasound2-data libassuan0 libatomic1 libattr1 libaudit-common libaudit1 libavahi-client-dev libavahi-client3 libavahi-common-data libavahi-common-dev libavahi-common3 libavahi-compat-libdnssd-dev libavahi-compat-libdnssd1 libavahi-core7 libbabeltrace1 libbind9-161 libbinutils libblkid-dev libblkid1 libbsd0 libbz2-1.0 libc-bin libc-dev-bin libc-l10n libc6 libc6-dbg libc6-dev libcairo-gobject2 libcairo-script-interpreter2 libcairo2 libcairo2-dev libcap-ng0 libcap2 libcap2-bin libcc1-0 libcom-err2 libcroco3 libcryptsetup12 libcurl3-gnutls libcurl4 libdaemon0 libdatrie1 libdb5.3 libdbus-1-3 libdbus-1-dev libdebconfclient0 libdevmapper1.02.1 libdpkg-perl libdw1 libedit2 libelf1 liberror-perl libexpat1 libexpat1-dev libext2fs2 libfakeroot libfastjson4 libfdisk1 libffi-dev libffi6 libfile-fcntllock-perl libfl2 libfontconfig1 libfontconfig1-dev libfreetype6 libfreetype6-dev libfribidi-dev libfribidi0 libfstrm0 libftdi1-2 libfuse2 libgcc-8-dev libgcrypt20 libgdbm-compat4 libgdbm6 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common libgdk-pixbuf2.0-dev libgeoip1 libgif-dev libgif7 libgirepository-1.0-1 libglib2.0-0 libglib2.0-bin libglib2.0-data libglib2.0-dev libglib2.0-dev-bin libgmp10 libgnutls30 libgomp1 libgpg-error0 libgpm2 libgraphite2-3 libgraphite2-dev libgssapi-krb5-2 libharfbuzz-dev libharfbuzz-gobject0 libharfbuzz-icu0 libharfbuzz0b libi2c0 libice-dev libice6 libicu-dev libidn11 libidn2-0 libiptc0 libisccc161 libisccfg163 libiw30 libjpeg-dev libjpeg62-turbo libjpeg62-turbo-dev libk5crypto3 libkeyutils1 libklibc libkmod2 libkrb5-3 libkrb5support0 libksba8 libldap-2.4-2 libldap-common liblmdb0 liblocale-gettext-perl liblognorm5 libluajit-5.1-2 libluajit-5.1-common liblwres161 liblz4-1 liblzma5 liblzo2-2 libmagic-mgc libmagic1 libmnl-dev libmnl0 libmount-dev libmount1 libmpc3 libmpfr6 libmtp-common libmtp-runtime libmtp9 libncurses6 libncursesw5 libncursesw6 libnetfilter-conntrack3 libnewt0.52 libnfnetlink0 libnfsidmap2 libnftnl11 libnghttp2-14 libnpth0 libnss-mdns libntfs-3g883 libp11-kit0 libpam-chksshpwd libpam-modules libpam-modules-bin libpam-runtime libpam-systemd libpam0g libpam0g-dev libpango-1.0-0 libpango1.0-dev libpangocairo-1.0-0 libpangoft2-1.0-0 libpangoxft-1.0-0 libparted2 libpci3 libpcre16-3 libpcre2-8-0 libpcre3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpcsclite1 libpipeline1 libpixman-1-0 libpixman-1-dev libpng-dev libpng-tools libpng16-16 libpolkit-agent-1-0 libpolkit-gobject-1-0 libpopt0 libprotobuf-c1 libpsl5 libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib libpython3-stdlib libraspberrypi-bin libraspberrypi-dev libraspberrypi-doc libraspberrypi0 librhash0 librsvg2-2 librsvg2-common librsvg2-dev librtmp1 libsamplerate0 libsasl2-2 libsasl2-modules-db libseccomp2 libselinux1 libselinux1-dev libsemanage-common libsemanage1 libsepol1 libsepol1-dev libslang2 libsmartcols1 libsqlite3-0 libss2 libssh2-1 libssl1.1 libstdc++-8-dev libstdc++6 libsystemd0 libtalloc2 libtasn1-6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libthai-data libthai0 libtiff5 libtinfo5 libtinfo6 libtirpc-common libtirpc3 libubsan1 libuchardet0 libudev-dev libudev0 libudev1 libunistring2 libusb-1.0-0 libuuid1 libuv1 libv4l-0 libv4l2rds0 libv4lconvert0 libwbclient0 libwebp6 libwrap0 libx11-6 libx11-data libx11-dev libxau-dev libxau6 libxcb-render0 libxcb-render0-dev libxcb-shm0 libxcb-shm0-dev libxcb1 libxcb1-dev libxext-dev libxext6 libxml2 libxtables12 libzstd1 locales login logrotate lsb-base lsb-release lua5.1 luajit make man-db manpages manpages-dev mawk mime-support mount nano ncdu ncurses-base ncurses-bin ncurses-term net-tools netbase netcat-openbsd netcat-traditional nfs-common ntfs-3g openresolv openssh-client openssh-server openssh-sftp-server openssl pango1.0-tools parted passwd patch pciutils perl perl-base pi-bluetooth pigz pinentry-curses pkg-config policykit-1 procps psmisc publicsuffix python-apt-common python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal python3 python3-apt python3-certifi python3-chardet python3-debconf python3-distutils python3-idna python3-lib2to3 python3-minimal python3-pkg-resources python3-requests python3-rpi.gpio python3-six python3-smbus python3-urllib3 raspberrypi-net-mods raspberrypi-sys-mods raspi-config raspinfo read-edid readline-common rfkill rng-tools rpcbind rpi-eeprom rpi.gpio-common rsync rsyslog sensible-utils shared-mime-info ssh ssh-import-id strace sudo systemd systemd-sysv sysvinit-utils tar tasksel tasksel-data traceroute triggerhappy tzdata ucf udev unzip usb-modeswitch usb-modeswitch-data usb.ids usbutils util-linux uuid-dev v4l-utils vim-common vim-tiny wget whiptail wireless-regdb wireless-tools wpasupplicant x11-common x11proto-core-dev x11proto-dev x11proto-xext-dev xauth xkb-data xorg-sgml-doctools xtrans-dev xxd xz-utils zlib1g zlib1g-dev 523 aktualisiert, 102 neu installiert, 10 zu entfernen und 0 nicht aktualisiert. Es müssen noch 0 B von 344 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 238 MB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] j Changelogs werden gelesen... Fertig -bash: OM: Kommando nicht gefunden. OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease OK:2 http://archive.raspberrypi.org/debian bullseye InRelease OK:3 https://deb.nodesource.com/node_18.x bullseye InRelease Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Aktualisierung für 523 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen. Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Paketaktualisierung (Upgrade) wird berechnet... Fertig Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: bsdmainutils g++-8 geoip-database libbind9-161 libcroco3 libdns1104 libdns1110 libevent-2.1-6 libfl2 libgdk-pixbuf2.0-0 libgeoip1 libicu63 libisc1100 libisc1105 libisccc161 libisccfg163 libisl19 libjim0.77 libjsoncpp1 liblwres161 libmpdec2 libncursesw5 libperl5.28 libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib libpython3.7 libpython3.7-minimal libpython3.7-stdlib libstdc++-8-dev libusb-0.1-4 perl-modules-5.28 python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal python3.7-minimal raspinfo usb.ids Verwenden Sie »sudo apt autoremove«, um sie zu entfernen. Die folgenden Pakete werden ENTFERNT: libgcc1 libpcre2-posix0 libpolkit-backend-1-0 libpython-dev libpython-stdlib python python-dev python-minimal python-rpi.gpio python3.7 Die folgenden NEUEN Pakete werden installiert: alsa-topology-conf alsa-ucm-conf bind9-libs bsdextrautils cpp-10 dos2unix g++-10 gcc-10 gcc-10-base gcc-9-base kms++-utils libapt-pkg6.0 libasan6 libatopology2 libboost-regex1.71.0 libboost-regex1.74.0 libbpf0 libbrotli-dev libbrotli1 libc-devtools libcbor0 libcrypt-dev libcrypt1 libctf-nobfd0 libctf0 libdatrie-dev libdebuginfod1 libdeflate0 libdns-export1110 libdns1110 libdrm-common libdrm-omap1 libdrm2 libevent-2.1-7 libfdt1 libffi7 libfido2-1 libfmt7 libfontconfig-dev libfreetype-dev libgcc-10-dev libgcc-s1 libgd3 libgdk-pixbuf-2.0-0 libgdk-pixbuf-2.0-dev libgdk-pixbuf-xlib-2.0-0 libgdk-pixbuf-xlib-2.0-dev libhogweed6 libicu67 libip4tc2 libip6tc2 libisc-export1105 libisc1105 libisl23 libjim0.79 libjson-c5 libjsoncpp24 libkms++0 libmaxminddb0 libmd0 libmpdec3 libnettle8 libnsl-dev libnsl2 libnss-nis libnss-nisplus libpcre2-16-0 libpcre2-32-0 libpcre2-dev libpcre2-posix2 libperl5.32 libprocps8 libpython3.9 libpython3.9-minimal libpython3.9-stdlib libreadline8 libsource-highlight-common libsource-highlight4v5 libstdc++-10-dev libtevent0 libthai-dev libtirpc-dev libxpm4 libxxhash0 libyaml-0-2 logsave mailcap media-types mksh ncal pci.ids perl-modules-5.32 python3-distro python3-toml python3.9 python3.9-minimal raspi-utils rng-tools-debian runit-helper systemd-timesyncd userconf-pi vcdbg Die folgenden Pakete werden aktualisiert (Upgrade): acl alsa-utils apt apt-listchanges apt-utils avahi-daemon base-files base-passwd bash bash-completion bind9-host binutils binutils-arm-linux-gnueabihf binutils-common bluez bluez-firmware bsdmainutils bsdutils build-essential busybox bzip2 ca-certificates cifs-utils cmake cmake-data console-setup console-setup-linux coreutils cpio cpp cpp-8 crda cron curl dash dbus dc debconf debconf-i18n debconf-utils debianutils device-tree-compiler dhcpcd5 diffutils dirmngr distro-info-data dmidecode dmsetup dosfstools dphys-swapfile dpkg dpkg-dev e2fsprogs ed ethtool fake-hwclock fakeroot fbset fdisk file findutils firmware-atheros firmware-brcm80211 firmware-libertas firmware-misc-nonfree firmware-realtek flashrom fontconfig fontconfig-config fonts-dejavu-core fuse g++ g++-8 gcc gcc-7-base gcc-8 gcc-8-base gdb gdbm-l10n geoip-database gettext-base gir1.2-freedesktop gir1.2-gdkpixbuf-2.0 gir1.2-glib-2.0 gir1.2-harfbuzz-0.0 gir1.2-pango-1.0 gir1.2-rsvg-2.0 git git-man gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv grep groff-base gzip hardlink hostname htop i2c-tools icu-devtools ifupdown info init init-system-helpers initramfs-tools initramfs-tools-core install-info iproute2 iptables iputils-ping isc-dhcp-client isc-dhcp-common iso-codes iw kbd keyboard-configuration keyutils klibc-utils kmod less libacl1 libalgorithm-diff-perl libalgorithm-diff-xs-perl libapparmor1 libarchive13 libasan5 libasound2 libasound2-data libassuan0 libatomic1 libattr1 libaudit-common libaudit1 libavahi-client-dev libavahi-client3 libavahi-common-data libavahi-common-dev libavahi-common3 libavahi-compat-libdnssd-dev libavahi-compat-libdnssd1 libavahi-core7 libbabeltrace1 libbind9-161 libbinutils libblkid-dev libblkid1 libbsd0 libbz2-1.0 libc-bin libc-dev-bin libc-l10n libc6 libc6-dbg libc6-dev libcairo-gobject2 libcairo-script-interpreter2 libcairo2 libcairo2-dev libcap-ng0 libcap2 libcap2-bin libcc1-0 libcom-err2 libcroco3 libcryptsetup12 libcurl3-gnutls libcurl4 libdaemon0 libdatrie1 libdb5.3 libdbus-1-3 libdbus-1-dev libdebconfclient0 libdevmapper1.02.1 libdpkg-perl libdw1 libedit2 libelf1 liberror-perl libexpat1 libexpat1-dev libext2fs2 libfakeroot libfastjson4 libfdisk1 libffi-dev libffi6 libfile-fcntllock-perl libfl2 libfontconfig1 libfontconfig1-dev libfreetype6 libfreetype6-dev libfribidi-dev libfribidi0 libfstrm0 libftdi1-2 libfuse2 libgcc-8-dev libgcrypt20 libgdbm-compat4 libgdbm6 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common libgdk-pixbuf2.0-dev libgeoip1 libgif-dev libgif7 libgirepository-1.0-1 libglib2.0-0 libglib2.0-bin libglib2.0-data libglib2.0-dev libglib2.0-dev-bin libgmp10 libgnutls30 libgomp1 libgpg-error0 libgpm2 libgraphite2-3 libgraphite2-dev libgssapi-krb5-2 libharfbuzz-dev libharfbuzz-gobject0 libharfbuzz-icu0 libharfbuzz0b libi2c0 libice-dev libice6 libicu-dev libidn11 libidn2-0 libiptc0 libisccc161 libisccfg163 libiw30 libjpeg-dev libjpeg62-turbo libjpeg62-turbo-dev libk5crypto3 libkeyutils1 libklibc libkmod2 libkrb5-3 libkrb5support0 libksba8 libldap-2.4-2 libldap-common liblmdb0 liblocale-gettext-perl liblognorm5 libluajit-5.1-2 libluajit-5.1-common liblwres161 liblz4-1 liblzma5 liblzo2-2 libmagic-mgc libmagic1 libmnl-dev libmnl0 libmount-dev libmount1 libmpc3 libmpfr6 libmtp-common libmtp-runtime libmtp9 libncurses6 libncursesw5 libncursesw6 libnetfilter-conntrack3 libnewt0.52 libnfnetlink0 libnfsidmap2 libnftnl11 libnghttp2-14 libnpth0 libnss-mdns libntfs-3g883 libp11-kit0 libpam-chksshpwd libpam-modules libpam-modules-bin libpam-runtime libpam-systemd libpam0g libpam0g-dev libpango-1.0-0 libpango1.0-dev libpangocairo-1.0-0 libpangoft2-1.0-0 libpangoxft-1.0-0 libparted2 libpci3 libpcre16-3 libpcre2-8-0 libpcre3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpcsclite1 libpipeline1 libpixman-1-0 libpixman-1-dev libpng-dev libpng-tools libpng16-16 libpolkit-agent-1-0 libpolkit-gobject-1-0 libpopt0 libprotobuf-c1 libpsl5 libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib libpython3-stdlib libraspberrypi-bin libraspberrypi-dev libraspberrypi-doc libraspberrypi0 librhash0 librsvg2-2 librsvg2-common librsvg2-dev librtmp1 libsamplerate0 libsasl2-2 libsasl2-modules-db libseccomp2 libselinux1 libselinux1-dev libsemanage-common libsemanage1 libsepol1 libsepol1-dev libslang2 libsmartcols1 libsqlite3-0 libss2 libssh2-1 libssl1.1 libstdc++-8-dev libstdc++6 libsystemd0 libtalloc2 libtasn1-6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libthai-data libthai0 libtiff5 libtinfo5 libtinfo6 libtirpc-common libtirpc3 libubsan1 libuchardet0 libudev-dev libudev0 libudev1 libunistring2 libusb-1.0-0 libuuid1 libuv1 libv4l-0 libv4l2rds0 libv4lconvert0 libwbclient0 libwebp6 libwrap0 libx11-6 libx11-data libx11-dev libxau-dev libxau6 libxcb-render0 libxcb-render0-dev libxcb-shm0 libxcb-shm0-dev libxcb1 libxcb1-dev libxext-dev libxext6 libxml2 libxtables12 libzstd1 locales login logrotate lsb-base lsb-release lua5.1 luajit make man-db manpages manpages-dev mawk mime-support mount nano ncdu ncurses-base ncurses-bin ncurses-term net-tools netbase netcat-openbsd netcat-traditional nfs-common ntfs-3g openresolv openssh-client openssh-server openssh-sftp-server openssl pango1.0-tools parted passwd patch pciutils perl perl-base pi-bluetooth pigz pinentry-curses pkg-config policykit-1 procps psmisc publicsuffix python-apt-common python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal python3 python3-apt python3-certifi python3-chardet python3-debconf python3-distutils python3-idna python3-lib2to3 python3-minimal python3-pkg-resources python3-requests python3-rpi.gpio python3-six python3-smbus python3-urllib3 raspberrypi-net-mods raspberrypi-sys-mods raspi-config raspinfo read-edid readline-common rfkill rng-tools rpcbind rpi-eeprom rpi.gpio-common rsync rsyslog sensible-utils shared-mime-info ssh ssh-import-id strace sudo systemd systemd-sysv sysvinit-utils tar tasksel tasksel-data traceroute triggerhappy tzdata ucf udev unzip usb-modeswitch usb-modeswitch-data usb.ids usbutils util-linux uuid-dev v4l-utils vim-common vim-tiny wget whiptail wireless-regdb wireless-tools wpasupplicant x11-common x11proto-core-dev x11proto-dev x11proto-xext-dev xauth xkb-data xorg-sgml-doctools xtrans-dev xxd xz-utils zlib1g zlib1g-dev 523 aktualisiert, 102 neu installiert, 10 zu entfernen und 0 nicht aktualisiert. Es müssen noch 0 B von 344 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 238 MB Plattenplatz zusätzlich benutzt. Changelogs werden gelesen... Fertigelogs werden gelesen... 0% apt-listchanges: Neuigkeiten ---------------------------- apt (2.1.16) unstable; urgency=medium Automatically remove unused kernels on apt {dist,full}-upgrade. To revert to previous behavior, set APT::Get::AutomaticRemove::Kernels to false or pass --no-auto-remove to the command. apt-get remains unchanged. Packages files can now set the Phased-Update-Percentage field to restrict update rollout to a specified percentage of machines. Previously, this has only been available to users of Ubuntu's update-manager tool. See apt_preferences(5) for details and how to configure multiple systems to get the same updates. Phased updates are disabled in chroots for now to not break buildd-style setups. -- Julian Andres Klode <jak@debian.org> Fri, 08 Jan 2021 22:01:50 +0100 apt (1.9.11) experimental; urgency=medium apt(8) now waits for the lock indefinitely if connected to a tty, or for 120 seconds if not. -- Julian Andres Klode <jak@debian.org> Wed, 26 Feb 2020 20:30:33 +0100 apt (1.9.6) experimental; urgency=medium apt(8) no longer treats package names passed as regular expressions or fnmatch expressions, requiring the use of patterns (apt-patterns(5)) to perform complex searches. For ease of use, regular expressions starting with ^ or ending with $ continue to work. This fixes the problem where e.g. g++ could mean either "the package g++" or, if there is no g++ package, "all packages containing g". This change will propagate to apt-* after the release of Debian bullseye. -- Julian Andres Klode <jak@debian.org> Wed, 15 Jan 2020 21:45:18 +0100 apt (1.9.5) unstable; urgency=medium Credentials in apt_auth.conf(5) now only apply to https and tor+https sources to avoid them being leaked over plaintext (Closes: #945911). To opt-in to http, add http:// before the hostname. Note that this will transmit credentials in plain text, which you do not want on devices that could be operating in an untrusted network. -- Julian Andres Klode <juliank@ubuntu.com> Mon, 02 Dec 2019 11:45:52 +0100 bsdmainutils (12.1.1) unstable; urgency=medium The "calendar" program, formerly provided in this package, now appears in the separate package "calendar". The tools "col", "colrm", "column", "hexdump", and "ul" are now provided as "bsdextrautils" from the util-linux sources. -- Michael Meskes <meskes@debian.org> Wed, 27 May 2020 17:05:02 +0200 bsdmainutils (12.1.3) unstable; urgency=medium The tools "look" and "write" are also now part of "bsdextrautils" from the util-linux sources. : hier geht es nie weiter, wenn ich von debian 10 auf 11 updaten möchte -
@speedyblade sagte in Nach Update läuft nichts mehr!:
OK:3 https://deb.nodesource.com/node_18.x bullseye InRelease
Schon wieder/noch immer das falsche Repository.
-
@speedyblade sagte in Nach Update läuft nichts mehr!:
hier geht es nie weiter, wenn ich von debian 10 auf 11 updaten möchte
Mit
qaus den ChangeLogs raus. -
wir kommen nicht weiter....das hier Fehler sind, habe ich verstanden, aber dann mach mir doch mal ne step by step anleitung, damit das problem beseitigt werden kann.
von einem beitrag zum anderen zu verweisen, hilft ja auch nicht wie man sieht...ist nämlich alles durchgemacht worden...hier bleibe ich nun stecken beim update von 11 auf 12
Alle Pakete sind aktuell. pi@RaspberryPi4:~ $ deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware -bash: deb: Kommando nicht gefunden. pi@RaspberryPi4:~ $ -
Jooo...
Die Zeilen musst du auch nicht in die Eingabezeile knallen sondern in die genannte Datei. -
@speedyblade sagte in Nach Update läuft nichts mehr!:
...hier bleibe ich nun stecken beim update von 11 auf 12
Bist du denn jetzt schon auf 11?
-
@speedyblade sagte in Nach Update läuft nichts mehr!:
aber dann mach mir doch mal ne step by step anleitung, damit das problem beseitigt werden kann.
Hab ich schon, du liest sie offenbar gerade.
-
und das geht wie?
bin bereits auf 11, genau...und jetzt möchte ich gleich weiter auf 12
-
@speedyblade sagte in Nach Update läuft nichts mehr!:
und jetzt möchte ich gleich weiter auf 12
gibt es für Raspberry OS noch nicht
-
@codierknecht sagte in Nach Update läuft nichts mehr!:
Davon abgesehen stehst du auf 'Buster'. => das heißt?
Dass Du ein totes Pferd reitest.
"Buster" (Debian 10) ist abgekündigt. Du kannst "Bullseye" (Debian 11) nehmen oder gleich auf "Bookworm" (Debian 12) gehen.wo oder wie holst du dir diese Info her?
Sagt Dir u.a.
iob diag. Quasi das "Swiss-Army-Knife" für den ioBroker
also ihr widersprecht euch da aber sowas von
der eine sagt auf 12, der andere sagt auf 12 läuft noch nicht...wie soll sich da einer noch auskennenpi@RaspberryPi4:~ $ lsb_release -a No LSB modules are available. Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseyelaufen tut der iobroker dennoch noch nicht
-
@speedyblade sagte in Nach Update läuft nichts mehr!:
Sagt Dir u.a.
iob diag.bezieht sich auf Deine Frage nach der empfohlenen Version von Node/NPM.
der eine sagt auf 12, der andere sagt auf 12 läuft noch nicht...wie soll sich da einer noch auskennen
Ich habe meinen NUC neu aufgesetzt und bin gleich auf 12 gegangen. Mut zur Lücke.
Ist noch nicht offiziell empfohlen, wird aber in Kürze so sein.
Warum noch 11 installieren, wenn meine Adapter mit 12 problemlos laufen? -
@speedyblade sagte in Nach Update läuft nichts mehr!:
also ihr widersprecht euch da aber sowas von
Nein!
genau lesen!
@thomas-braun sagte in Nach Update läuft nichts mehr!:
@speedyblade sagte in Nach Update läuft nichts mehr!:
kann ich per console auf Debian 12 gehen
Nicht direkt von einer 10 aus. Raspberry OS gibt es aber auch noch nicht auf 12 basierend
und ja!
Da wo es das bereits gibt, sollte man direkt auf v12 gehen -
@codierknecht sagte in Nach Update läuft nichts mehr!:
Ich habe meinen NUC neu aufgesetzt und bin gleich auf 12 gegangen
ich auch!
aber hier geht's um Raspberry pi OS, und das hinkt noch hinterher!
Vermutlich auch wegen des Pi5 -
@homoran sagte in Nach Update läuft nichts mehr!:
Vermutlich auch wegen des Pi5
OT:
Das vermute ich auch. Raspberry OS 'Bookworm' (auf Debian 12 basierend) dürfte im Zuge der Markteinführung des Pi5 veröffentlicht werden. Wird vermutlich gar nicht mehr lange dauern, die Repos wurden, wenn ich das richtig gesehen habe, schon von 'stable' auf 'oldstable' geschoben. -
dann lassen wir erstmal auf 11...
aber...
laufen tut der iobroker dennoch noch nicht
-
@speedyblade sagte in Nach Update läuft nichts mehr!:
Description: Raspbian GNU/Linux 11 (bullseye)
Dann bleib da jetzt stehen, das ist die aktuelle 'stable' für den Raspberry.
-
@speedyblade sagte in Nach Update läuft nichts mehr!:
dann lassen wir erstmal auf 11...
aber...
laufen tut der iobroker dennoch noch nicht
dann bitte aktuelke Vollversion von
iob diag -
@speedyblade sagte in Nach Update läuft nichts mehr!:
laufen tut der iobroker dennoch noch nicht
iob diagsagt nun?
Also nachdem ducd /opt/iobroker sudo -H -u iobroker npm install iobroker.js-controllerausgeführt hast.
-
pi@RaspberryPi4:~ $ cd /opt/iobroker pi@RaspberryPi4:/opt/iobroker $ sudo -H -u iobroker npm install iobroker.js-controller up to date in 5s 49 packages are looking for funding run `npm fund` for detailsSkript v.2023-06-20 *** BASE SYSTEM *** Static hostname: RaspberryPi4 Icon name: computer Machine ID: 3b31b8f74a5a4e889cadcd832f7f9b9a Boot ID: 6785fabd803f41a6a887e49c0bce89b6 Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.54-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 11:41:44 up 28 min, 1 user, load average: 0.20, 0.15, 0.10 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=50.1'C volt=0.8700V *** Time and Time Zones *** Local time: Fri 2023-09-29 11:41:45 CEST Universal time: Fri 2023-09-29 09:41:45 UTC RTC time: n/a Time zone: Europe/Vienna (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 77M 7.3G 0.0K 432M 7.6G Swap: 99M 0B 99M Total: 7.9G 77M 7.4G 7760 M total memory 77 M used memory 204 M active memory 206 M inactive memory 7251 M free memory 43 M buffer memory 388 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 916G 3.7G 866G 1% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.8G 0 3.8G 0% /dev/shm tmpfs tmpfs 1.6G 728K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 253M 52M 201M 21% /boot tmpfs tmpfs 777M 0 777M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Sep 29 11:12:47 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:D6:FD:D6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=206cf84d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Fri Sep 29 11:12:50 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Sep 29 11:12:50 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Fri Sep 29 11:12:54 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,stripe=8191 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 682M /var/ 406M /var/cache 401M /var/cache/apt 337M /var/cache/apt/archives 95M /var/lib Archived and active journals take up 64.0M in the file system. /opt/iobroker/backups: 17M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 122M /opt/iobroker/iobroker-data/ 59M /opt/iobroker/iobroker-data/backup-objects 25M /opt/iobroker/iobroker-data/files 23M /opt/iobroker/iobroker-data/node-red/node_modules 23M /opt/iobroker/iobroker-data/node-red The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 5.2M /opt/iobroker/iobroker-data/files/knx.admin/static/js/main.fcc1088d.js.map 5.1M /opt/iobroker/iobroker-data/objects.json.migrated 5.1M /opt/iobroker/iobroker-data/objects.json.bak.migrated 4.5M /opt/iobroker/iobroker-data/objects.jsonl *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:121:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.17.1 node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:121:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.17.1 Core adapters versions node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:121:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.17.1 js-controller: node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:121:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.17.1 admin: node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:121:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.17.1 javascript: Adapters from github: 0 Adapter State node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:121:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.17.1 Enabled adapters with bindings node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:121:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.17.1 ioBroker-Repositories node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:121:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.17.1 Installed ioBroker-Instances node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:121:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.17.1 Objects and States Please stand by - This may take a while Objects: 0 States: 0 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15622 504/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 15624 504/sshd: /usr/sbin udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13531 369/avahi-daemon: r udp 0 0 0.0.0.0:34267 0.0.0.0:* 108 13533 369/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15661 671/dhcpcd udp6 0 0 :::546 :::* 0 15681 671/dhcpcd udp6 0 0 :::49792 :::* 108 13534 369/avahi-daemon: r udp6 0 0 :::5353 :::* 108 13532 369/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-09-29 08:20:45.300 - error: host.RaspberryPi4 Caught by controller[6]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.300 - error: host.RaspberryPi4 Caught by controller[7]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.301 - error: host.RaspberryPi4 Caught by controller[8]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.301 - error: host.RaspberryPi4 Caught by controller[9]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.301 - error: host.RaspberryPi4 Caught by controller[10]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.301 - error: host.RaspberryPi4 Caught by controller[11]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.305 - error: host.RaspberryPi4 Caught by controller[12]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.306 - error: host.RaspberryPi4 Caught by controller[13]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.306 - error: host.RaspberryPi4 Caught by controller[14]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.306 - error: host.RaspberryPi4 Caught by controller[15]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.306 - error: host.RaspberryPi4 Caught by controller[16]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.306 - error: host.RaspberryPi4 Caught by controller[17]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.307 - error: host.RaspberryPi4 Caught by controller[18]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.307 - error: host.RaspberryPi4 Caught by controller[19]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.307 - error: host.RaspberryPi4 Caught by controller[20]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.307 - error: host.RaspberryPi4 Caught by controller[21]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.308 - info: host.RaspberryPi4 instance system.adapter.rpi2.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.309 - info: host.RaspberryPi4 instance system.adapter.info.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.408 - info: host.RaspberryPi4 instance system.adapter.admin.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.409 - info: host.RaspberryPi4 instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.470 - info: host.RaspberryPi4 instance system.adapter.knx.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.687 - info: host.RaspberryPi4 instance system.adapter.node-red.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.687 - info: host.RaspberryPi4 instance system.adapter.mqtt.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.688 - info: host.RaspberryPi4 All instances are stopped. 2023-09-29 08:20:45.862 - info: host.RaspberryPi4 terminated -
cd /opt/iobroker npm ls tarDas Modul 'tar' fehlte die Tage auch bei anderen Usern. Keine Ahnung wo/ob es da klemmt.
