idealTree:iobroker: sill idealTree buildDeps

Homoran

@andreas-5 sagte in idealTree:iobroker: sill idealTree buildDeps:

hier angepinnten Installationsanleitung

bitte Link

@andreas-5 sagte in idealTree:iobroker: sill idealTree buildDeps:

Jemand nen Tipp?

warten!

Andreas 5

@homoran

link: https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht/1

ich hab da 15 minuten gewartet. macht nicht den eindruck, dass da noch was passiert. das in den klammern sieht aus wie ein fortschrittsbalken, der auch direkt komplett ausgefüllt aussieht...

gibt es vielleicht einen "verbose"-mode für den installationsskript? (

curl -sLf https://iobroker.net/install.sh | bash -

)

Homoran

@andreas-5 sagte in idealTree:iobroker: sill idealTree buildDeps:

ich hab da 15 minuten gewartet. macht nicht den eindruck, dass da noch was passiert.

statt Einzudrücken auch mal ne zweite session aufgemacht um z.B. per top zu sehen, ob da noch Aktivität ist?

Thomas Braun

@andreas-5

Nein, gibt es an der Stelle nicht.
Grundsätzlich das System i. O.?

Versuch mal, ob

iob diag

was ausspuckt .

Andreas 5

@Homoran

@thomas-braun

======== Start marking the full check here =========


Skript v.2023-06-20

*** BASE SYSTEM ***
   Static hostname: iot
         Icon name: computer
        Machine ID: 2054d28e7aae4a75ac756180b13a399e
           Boot ID: 663a3384521f4f4c9cffdd5be3131c12
  Operating System: Debian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model           : Raspberry Pi 3 Model B Plus Rev 1.3
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 19:29:10 up 0 min,  1 user,  load average: 1.02, 0.33, 0.11
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=53.2'C
volt=1.3500V

*** Time and Time Zones ***
               Local time: Sat 2023-09-23 19:29:10 CEST
           Universal time: Sat 2023-09-23 17:29:10 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: no
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
andy
/home/andy
andy adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            909M         79M        687M        0.0K        142M        776M
Swap:            99M          0B         99M
Total:          1.0G         79M        787M

          909 M total memory
           79 M used memory
          126 M active memory
           23 M inactive memory
          687 M free memory
           12 M buffer memory
          129 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       15G  2.0G   12G  15% /
devtmpfs       devtmpfs  325M     0  325M   0% /dev
tmpfs          tmpfs     455M     0  455M   0% /dev/shm
tmpfs          tmpfs     182M  980K  181M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs      91M     0   91M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Sep 23 19:28:24 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=6e2e7caa-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Sep 23 19:28:27 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Sep 23 19:28:27 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Sep 23 19:28:27 2023] EXT4-fs (mmcblk0p2): recovery complete
[Sat Sep 23 19:28:27 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sat Sep 23 19:28:27 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Sep 23 19:28:30 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
502M    /var/
147M    /var/lib
144M    /var/log
137M    /var/log/journal/2054d28e7aae4a75ac756180b13a399e
137M    /var/log/journal

Archived and active journals take up 136.0M in the file system.

/opt/iobroker/backups:
du: cannot access '/opt/iobroker/backups/': No such file or directory

/opt/iobroker/iobroker-data:
du: cannot access '/opt/iobroker/iobroker-data/': No such file or directory

The five largest files in iobroker-data are:
find: '/opt/iobroker/iobroker-data': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

find: '/opt/iobroker/node_modules': No such file or directory
Temp directories causing npm8 problem: 0
No problems detected

npm ERR! code ELSPROBLEMS
npm ERR! missing: iobroker.admin@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.backitup@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.discovery@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.js-controller@stable, required by iobroker.inst@3.0.0

npm ERR! A complete log of this run can be found in: /home/andy/.npm/_logs/2023-09-23T17_29_28_972Z-debug-0.log
Errors in npm tree: 0

*** ioBroker-Installation ***

ioBroker Status
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Core adapters versions
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1
js-controller:
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1
admin:
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1
javascript:

npm ERR! code ELSPROBLEMS
npm ERR! missing: iobroker.admin@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.backitup@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.discovery@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.js-controller@stable, required by iobroker.inst@3.0.0

npm ERR! A complete log of this run can be found in: /home/andy/.npm/_logs/2023-09-23T17_29_33_695Z-debug-0.log
Adapters from github:   0

Adapter State
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Enabled adapters with bindings
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

ioBroker-Repositories
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Installed ioBroker-Instances
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.17.1

Objects and States
Please stand by - This may take a while
Objects:        0
States:         0

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye InRelease
Hit:4 http://deb.debian.org/debian bullseye-updates InRelease
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease

Thomas Braun

@andreas-5

Das ist nicht vollständig.
Aber deine SD-Karte hat 'nen Schuß. Nimm eine andere/neue.

Andreas 5

@thomas-braun
oh ok, woran erkennst du das im log?

Thomas Braun

@andreas-5 sagte in idealTree:iobroker: sill idealTree buildDeps:

An den Meldungen:

Messages concerning ext4 filesystem in dmesg:

Homoran

@andreas-5 npm i läuft noch

aber Thomas hat recht, Karte hin

Andreas 5

noch eine kleine ergänzung: neben der defekten micro sd hatte ich noch das problem, dass die namensauflösung zu registry.npmjs.org nicht geklappt hat. ich musste hier einen eintrag in meiner hosts machen, danach lief die installation ohne weitere schwierigkeiten durch.

andy@iot:~ $ cat /etc/hosts
127.0.0.1       localhost
::1             localhost ip6-localhost ip6-loopback
ff02::1         ip6-allnodes
ff02::2         ip6-allrouters

127.0.1.1       iot
104.16.26.34    registry.npmjs.org

NEWS

idealTree:iobroker: sill idealTree buildDeps

Support us

487
Online

31.7k
Users

79.7k
Topics

1.3m
Posts

NEWS

idealTree:iobroker: sill idealTree buildDeps

Support us

487Online

31.7kUsers

79.7kTopics

1.3mPosts

487
Online

31.7k
Users

79.7k
Topics

1.3m
Posts