NEWS
Raspberry Pi 8gb swap aktivieren
ioBroker Allgemein
14
Beiträge
3
Kommentatoren
895
Aufrufe
2
Watching
-
Hi,
ich habe bei mir ein Pi 4 mit 8 gb ram am laufen wo die Masterinstallation des Iobrokers läuft.
Seit ein paar Wochen habe ich recht Regelmäßig Performance Probleme was ich auf ein vollen Arbeitsspeicher zurückführe, da nach einem Neustart alles wieder super läuft.
Habe ich das Richtig erkannt das das Swaping bei mir deaktiviert ist ?
pi@iobroker:~ $ free -m gesamt benutzt frei gemns. Puffer/Cache verfügbar Speicher: 7811 2454 1242 40 4113 5194 Swap: 99 0 99 pi@iobroker:~ $An dem Pi ist eine SSD mit 120GB Speicher also könnte ich das Swaping doch aktivieren oder spricht da was entgegen ?
pi@iobroker:~ $ df -h Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf /dev/root 117G 19G 93G 17% / devtmpfs 3,6G 0 3,6G 0% /dev tmpfs 3,9G 0 3,9G 0% /dev/shm tmpfs 1,6G 924K 1,6G 1% /run tmpfs 5,0M 4,0K 5,0M 1% /run/lock /dev/sda1 253M 51M 202M 20% /boot tmpfs 782M 24K 782M 1% /run/user/1000 pi@iobroker:~ $Wenn ja gibt es vielleicht eine Anleitung hier wie das funktioniert und wie groß man den Speicher für das Swaping auf der SSD macht.
Grüße
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
Habe ich das Richtig erkannt das das Swaping bei mir deaktiviert ist ?
nein!
der swap ist nur noch nicht gebraucht worden.
und das ist gut so!@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
spricht da was entgegen ?
swap ist nur für den Notfall gedacht
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
Habe ich das Richtig erkannt das das Swaping bei mir deaktiviert ist ?
nein!
der swap ist nur noch nicht gebraucht worden.
und das ist gut so!@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
spricht da was entgegen ?
swap ist nur für den Notfall gedacht
Ich glaube der 64bit Host war das Problem :
Ich habe grade wieder zwei Adapter auf den Master geschoben und neu gestartet, vorher war 15 freier Arbeitsspeicher vorhanden. Jetzt:
pi@IoBroker64Bit:~ $ free -m gesamt benutzt frei gemns. Puffer/Cache verfügbar Speicher: 1848 625 317 35 905 1119 Swap: 99 97 2 pi@IoBroker64Bit:~ $Seltsam dann nur ich habe immer den Master neu gestartet danach lief immer wieder alles Problemlos.
Iob diag ist ohne Fehler durchgelaufen bei beiden Installationen zumindest konnte ich kein Problem in der Ausgabe erkennen.
Soll ich die Ausgabe hier posten, recht viel ?
Grüße
-
Ich glaube der 64bit Host war das Problem :
Ich habe grade wieder zwei Adapter auf den Master geschoben und neu gestartet, vorher war 15 freier Arbeitsspeicher vorhanden. Jetzt:
pi@IoBroker64Bit:~ $ free -m gesamt benutzt frei gemns. Puffer/Cache verfügbar Speicher: 1848 625 317 35 905 1119 Swap: 99 97 2 pi@IoBroker64Bit:~ $Seltsam dann nur ich habe immer den Master neu gestartet danach lief immer wieder alles Problemlos.
Iob diag ist ohne Fehler durchgelaufen bei beiden Installationen zumindest konnte ich kein Problem in der Ausgabe erkennen.
Soll ich die Ausgabe hier posten, recht viel ?
Grüße
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
Soll ich die Ausgabe hier posten, recht viel ?
Ja, natürlich.
-
Ich glaube der 64bit Host war das Problem :
Ich habe grade wieder zwei Adapter auf den Master geschoben und neu gestartet, vorher war 15 freier Arbeitsspeicher vorhanden. Jetzt:
pi@IoBroker64Bit:~ $ free -m gesamt benutzt frei gemns. Puffer/Cache verfügbar Speicher: 1848 625 317 35 905 1119 Swap: 99 97 2 pi@IoBroker64Bit:~ $Seltsam dann nur ich habe immer den Master neu gestartet danach lief immer wieder alles Problemlos.
Iob diag ist ohne Fehler durchgelaufen bei beiden Installationen zumindest konnte ich kein Problem in der Ausgabe erkennen.
Soll ich die Ausgabe hier posten, recht viel ?
Grüße
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
vorher war 15 freier Arbeitsspeicher vorhanden. Jetzt
???
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
Seltsam dann nur ich habe immer den Master neu gestartet danach lief immer wieder alles Problemlos.
???
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
vorher war 15 freier Arbeitsspeicher vorhanden. Jetzt
???
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
Seltsam dann nur ich habe immer den Master neu gestartet danach lief immer wieder alles Problemlos.
???
pi@iobroker:~ $ iob diag
*** ioBroker Diagnosis ***
Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!Press any key to continue
======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 19:02:31 up 1:59, 3 users, load average: 2.06, 1.90, 1.80 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=59.9'C volt=0.9460V *** Time and Time Zones *** Local time: Sun 2023-07-16 19:02:31 CEST Universal time: Sun 2023-07-16 17:02:31 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 2.7G 607M 40M 4.5G 4.9G Swap: 99M 0B 99M Total: 7.9G 2.7G 707M 7811 M total memory 2747 M used memory 6054 M active memory 835 M inactive memory 607 M free memory 308 M buffer memory 4148 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 19G 93G 17% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 928K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 782M 24K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Jul 16 17:02:54 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:9F:6B:93 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=247e04bb-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Sun Jul 16 17:02:56 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Jul 16 17:02:56 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Sun Jul 16 17:02:58 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,stripe=8191 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 4.4G /var/ 3.7G /var/log/journal/ce513f1a44ff4c9dbd382eb66e08c51e 3.7G /var/log/journal 3.7G /var/log 477M /var/cache Archived and active journals take up 3.6G in the file system. /opt/iobroker/backups: 4.5G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.6G /opt/iobroker/iobroker-data/ 754M /opt/iobroker/iobroker-data/sqlite 686M /opt/iobroker/iobroker-data/files 126M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 754M /opt/iobroker/iobroker-data/sqlite/sqlite.db 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/states.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.1-deb-1nodesource1 Candidate: 18.16.1-deb-1nodesource1 Version table: *** 18.16.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 7.0.3 Adapters from github: 16 Adapter State + system.adapter.accuweather.0 : accuweather : IoBroker64Bit - enabled + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.bosesoundtouch.0 : bosesoundtouch : iobroker - enabled + system.adapter.broadlink2.0 : broadlink2 : iobroker - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker - enabled system.adapter.devices.0 : devices : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - enabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.energiefluss.0 : energiefluss : iobroker - enabled + system.adapter.envertech-pv.0 : envertech-pv : iobroker - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker - enabled + system.adapter.ham.0 : ham : iobroker - enabled + system.adapter.hekr.0 : hekr : IoBroker64Bit - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.logparser.0 : logparser : iobroker - enabled system.adapter.luftdaten.0 : luftdaten : iobroker - enabled + system.adapter.midea.0 : midea : IoBroker64Bit - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker64Bit - enabled, port: 54321 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : iobroker - enabled, port: 1886, bind: 192.168.178.69 + system.adapter.nuki.0 : nuki : IoBroker64Bit - enabled + system.adapter.nuki.1 : nuki : IoBroker64Bit - enabled + system.adapter.octoprint.0 : octoprint : iobroker - enabled + system.adapter.octoprint.1 : octoprint : iobroker - enabled + system.adapter.parcel.0 : parcel : iobroker - enabled + system.adapter.pi-hole.0 : pi-hole : iobroker - enabled + system.adapter.pioneer_sc_vsx.0 : pioneer_sc_vsx : iobroker - enabled, port: 23 + system.adapter.psa.0 : psa : iobroker - enabled + system.adapter.pvforecast.0 : pvforecast : iobroker - enabled + system.adapter.rpi2.0 : rpi2 : iobroker - enabled + system.adapter.rpi2.1 : rpi2 : IoBroker64Bit - enabled + system.adapter.s7.0 : s7 : iobroker - enabled + system.adapter.sainlogic.0 : sainlogic : iobroker - enabled, port: 45000, bind: 192.168.178.69 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1881, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1882, bind: 192.168.178.69 + system.adapter.sql.0 : sql : iobroker - enabled + system.adapter.switchbot-hub.0 : switchbot-hub : IoBroker64Bit - enabled + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.synology.1 : synology : iobroker - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : IoBroker64Bit - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled + system.adapter.upnp.0 : upnp : iobroker - enabled system.adapter.vis-bars.0 : vis-bars : iobroker - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker - enabled system.adapter.vis-history.0 : vis-history : iobroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - enabled system.adapter.vis-material.0 : vis-material : iobroker - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker - enabled system.adapter.vis-metro.0 : vis-metro : iobroker - enabled system.adapter.vis-players.0 : vis-players : iobroker - enabled system.adapter.vis-rgraph.0 : vis-rgraph : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker64Bit - enabled, port: 54321 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : iobroker - enabled, port: 1886, bind: 192.168.178.69 + system.adapter.pioneer_sc_vsx.0 : pioneer_sc_vsx : iobroker - enabled, port: 23 + system.adapter.sainlogic.0 : sainlogic : iobroker - enabled, port: 45000, bind: 192.168.178.69 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1881, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1882, bind: 192.168.178.69 + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.synology.1 : synology : iobroker - enabled, port: 5000 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.4 , installed 1.2.4 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "bosesoundtouch": 0.10.3 , installed 0.10.3 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "device-watcher": 2.9.1 , installed 2.9.2 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "evcc" : 0.0.10 , installed 0.0.10 Adapter "fb-checkpresence": 1.1.26, installed 1.1.26 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hekr" : 0.0.6 , installed 0.0.6 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "logparser" : 2.2.0 , installed 2.2.0 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "midea" : 0.0.7 , installed 0.1.0 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mqtt-client" : 1.6.3 , installed 1.6.3 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "octoprint" : 4.0.0 , installed 4.1.0 Adapter "parcel" : 0.0.27 , installed 0.0.30 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "psa" : 0.0.11 , installed 0.0.11 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "s7" : 1.3.15 , installed 1.3.15 Adapter "sainlogic" : 0.10.3 , installed 0.10.4 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "worx" : 2.1.3 , installed 2.1.3 Adapter "ws" : 1.3.0 , installed 1.3.0 Objects and States Please stand by - This may take a while Objects: 27580 States: 23295 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.69:1886 0.0.0.0:* LISTEN 1001 21459 2570/io.mqtt.3 tcp 0 0 192.168.178.69:1887 0.0.0.0:* LISTEN 1001 21460 2570/io.mqtt.3 tcp 0 0 192.168.178.69:1882 0.0.0.0:* LISTEN 1001 21403 2553/io.sonoff.0 tcp 0 0 192.168.178.69:2000 0.0.0.0:* LISTEN 1001 19045 2197/io.hm-rpc.2 tcp 0 0 192.168.178.69:2001 0.0.0.0:* LISTEN 1001 20848 2157/io.hm-rpc.1 tcp 0 0 192.168.178.69:2010 0.0.0.0:* LISTEN 1001 19188 2446/io.hm-rpc.3 tcp 0 0 192.168.178.69:8701 0.0.0.0:* LISTEN 1001 20800 1913/io.hm-rpc.0 tcp 0 0 192.168.178.69:45000 0.0.0.0:* LISTEN 1001 29710 3252/io.sainlogic.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 14060 936/exim4 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 21314 2480/io.mqtt.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 21313 2480/io.mqtt.1 tcp 0 0 0.0.0.0:1881 0.0.0.0:* LISTEN 1001 23176 2630/io.shelly.1 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 13897 526/cupsd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16198 592/sshd: /usr/sbin tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 17539 535/iobroker.js-con tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 16777 535/iobroker.js-con tcp6 0 0 :::8087 :::* LISTEN 1001 28160 3371/io.simple-api. tcp6 0 0 :::8082 :::* LISTEN 1001 40170 4633/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 17096 1621/io.admin.0 tcp6 0 0 :::8000 :::* LISTEN 1001 45882 3059/io.upnp.0 tcp6 0 0 ::1:25 :::* LISTEN 0 14061 936/exim4 tcp6 0 0 :::22 :::* LISTEN 0 16200 592/sshd: /usr/sbin tcp6 0 0 :::80 :::* LISTEN 0 16221 649/apache2 tcp6 0 0 ::1:631 :::* LISTEN 0 13896 526/cupsd udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 75778 9130/io.broadlink2. udp 0 0 0.0.0.0:52576 0.0.0.0:* 1001 75786 9130/io.broadlink2. udp 0 0 0.0.0.0:57313 0.0.0.0:* 1001 75783 9130/io.broadlink2. udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16722 454/dhcpcd udp 0 0 0.0.0.0:33083 0.0.0.0:* 1001 27739 3059/io.upnp.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 12060 580/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11843 394/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 21346 2538/io.shelly.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 26611 3059/io.upnp.0 udp 0 0 0.0.0.0:39221 0.0.0.0:* 108 11845 394/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 22319 2619/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 22320 2619/io.tuya.0 udp6 0 0 :::546 :::* 0 14291 454/dhcpcd udp6 0 0 :::5353 :::* 108 11844 394/avahi-daemon: r udp6 0 0 :::58850 :::* 108 11846 394/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-07-16 19:00:53.053 - info: parcel.0 (3228) terminating 2023-07-16 19:00:53.056 - info: parcel.0 (3228) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-07-16 19:00:53.218 - info: host.iobroker stopInstance system.adapter.parcel.0 send kill signal 2023-07-16 19:00:53.875 - info: host.iobroker instance system.adapter.parcel.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-07-16 19:00:54.171 - info: host.iobroker iobroker exit 0 2023-07-16 19:00:56.468 - info: web.0 (4633) ==> Connected system.user.admin from ::ffff:192.168.178.6 2023-07-16 19:00:58.836 - info: host.iobroker instance system.adapter.parcel.0 started with pid 4264 2023-07-16 19:01:11.127 - info: parcel.0 (4264) starting. Version 0.0.30 (non-npm: TA2k/ioBroker.parcel#ace65142356e3f2abcce759beead0c580a6279b3) in /opt/iobroker/node_modules/iobroker.parcel, node: v18.16.1, js-controller: 4.0.24 2023-07-16 19:01:11.238 - info: parcel.0 (4264) Login to DHL 2023-07-16 19:01:14.207 - info: parcel.0 (4264) Login to DHL successful 2023-07-16 19:01:14.343 - info: parcel.0 (4264) Login to Amazon 2023-07-16 19:01:15.056 - info: web.0 (4633) <== Disconnect system.user.admin from ::ffff:192.168.178.2 energiefluss.0 2023-07-16 19:01:15.070 - info: web.0 (4633) <== Disconnect system.user.admin from ::ffff:192.168.178.2 vis.0 2023-07-16 19:01:16.819 - info: parcel.0 (4264) Login to Amazon successful 2023-07-16 19:01:16.822 - info: parcel.0 (4264) Login to Hermes 2023-07-16 19:01:17.198 - info: parcel.0 (4264) Login to Hermes successful 2023-07-16 19:01:17.843 - info: web.0 (4633) ==> Connected system.user.admin from ::ffff:192.168.178.2 2023-07-16 19:01:19.155 - info: web.0 (4633) ==> Connected system.user.admin from ::ffff:192.168.178.2 2023-07-16 19:01:30.771 - info: admin.0 (1621) ==> Connected system.user.admin from ::ffff:192.168.178.52 2023-07-16 19:01:43.064 - info: web.0 (4633) <== Disconnect system.user.admin from ::ffff:192.168.178.6 vis.0 2023-07-16 19:02:00.084 - info: host.iobroker instance system.adapter.luftdaten.0 started with pid 4675 2023-07-16 19:02:05.912 - info: luftdaten.0 (4675) starting. Version 3.0.0 in /opt/iobroker/node_modules/iobroker.luftdaten, node: v18.16.1, js-controller: 4.0.24 2023-07-16 19:02:06.966 - info: luftdaten.0 (4675) Terminated (NO_ERROR): Without reason 2023-07-16 19:02:07.562 - info: host.iobroker instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR) 2023-07-16 19:04:00.078 - info: host.iobroker instance system.adapter.luftdaten.0 started with pid 5661============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
Copy text starting here:======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 11 (bullseye) Kernel: 6.1.25-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 1 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 7.8G 2.7G 681M 40M 4.5G 5.0G Swap: 99M 0B 99M Total: 7.9G 2.7G 781M Active iob-Instances: 63 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 27580 States: 23295 Size of iob-Database: 26M /opt/iobroker/iobroker-data/objects.jsonl 8.4M /opt/iobroker/iobroker-data/objects.json.migrated 8.4M /opt/iobroker/iobroker-data/objects.json.bak.migrated 26M /opt/iobroker/iobroker-data/states.jsonl 1.8M /opt/iobroker/iobroker-data/states.json.migrated 1.8M /opt/iobroker/iobroker-data/states.json.bak.migrated =================== END OF SUMMARY ==================== -
pi@iobroker:~ $ iob diag
*** ioBroker Diagnosis ***
Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!Press any key to continue
======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 19:02:31 up 1:59, 3 users, load average: 2.06, 1.90, 1.80 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=59.9'C volt=0.9460V *** Time and Time Zones *** Local time: Sun 2023-07-16 19:02:31 CEST Universal time: Sun 2023-07-16 17:02:31 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 2.7G 607M 40M 4.5G 4.9G Swap: 99M 0B 99M Total: 7.9G 2.7G 707M 7811 M total memory 2747 M used memory 6054 M active memory 835 M inactive memory 607 M free memory 308 M buffer memory 4148 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 19G 93G 17% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 928K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 782M 24K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Jul 16 17:02:54 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:9F:6B:93 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=247e04bb-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Sun Jul 16 17:02:56 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Jul 16 17:02:56 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Sun Jul 16 17:02:58 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,stripe=8191 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 4.4G /var/ 3.7G /var/log/journal/ce513f1a44ff4c9dbd382eb66e08c51e 3.7G /var/log/journal 3.7G /var/log 477M /var/cache Archived and active journals take up 3.6G in the file system. /opt/iobroker/backups: 4.5G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.6G /opt/iobroker/iobroker-data/ 754M /opt/iobroker/iobroker-data/sqlite 686M /opt/iobroker/iobroker-data/files 126M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 754M /opt/iobroker/iobroker-data/sqlite/sqlite.db 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/states.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.1-deb-1nodesource1 Candidate: 18.16.1-deb-1nodesource1 Version table: *** 18.16.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 7.0.3 Adapters from github: 16 Adapter State + system.adapter.accuweather.0 : accuweather : IoBroker64Bit - enabled + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.bosesoundtouch.0 : bosesoundtouch : iobroker - enabled + system.adapter.broadlink2.0 : broadlink2 : iobroker - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker - enabled system.adapter.devices.0 : devices : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - enabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.energiefluss.0 : energiefluss : iobroker - enabled + system.adapter.envertech-pv.0 : envertech-pv : iobroker - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker - enabled + system.adapter.ham.0 : ham : iobroker - enabled + system.adapter.hekr.0 : hekr : IoBroker64Bit - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.logparser.0 : logparser : iobroker - enabled system.adapter.luftdaten.0 : luftdaten : iobroker - enabled + system.adapter.midea.0 : midea : IoBroker64Bit - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker64Bit - enabled, port: 54321 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : iobroker - enabled, port: 1886, bind: 192.168.178.69 + system.adapter.nuki.0 : nuki : IoBroker64Bit - enabled + system.adapter.nuki.1 : nuki : IoBroker64Bit - enabled + system.adapter.octoprint.0 : octoprint : iobroker - enabled + system.adapter.octoprint.1 : octoprint : iobroker - enabled + system.adapter.parcel.0 : parcel : iobroker - enabled + system.adapter.pi-hole.0 : pi-hole : iobroker - enabled + system.adapter.pioneer_sc_vsx.0 : pioneer_sc_vsx : iobroker - enabled, port: 23 + system.adapter.psa.0 : psa : iobroker - enabled + system.adapter.pvforecast.0 : pvforecast : iobroker - enabled + system.adapter.rpi2.0 : rpi2 : iobroker - enabled + system.adapter.rpi2.1 : rpi2 : IoBroker64Bit - enabled + system.adapter.s7.0 : s7 : iobroker - enabled + system.adapter.sainlogic.0 : sainlogic : iobroker - enabled, port: 45000, bind: 192.168.178.69 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1881, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1882, bind: 192.168.178.69 + system.adapter.sql.0 : sql : iobroker - enabled + system.adapter.switchbot-hub.0 : switchbot-hub : IoBroker64Bit - enabled + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.synology.1 : synology : iobroker - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : IoBroker64Bit - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled + system.adapter.upnp.0 : upnp : iobroker - enabled system.adapter.vis-bars.0 : vis-bars : iobroker - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker - enabled system.adapter.vis-history.0 : vis-history : iobroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - enabled system.adapter.vis-material.0 : vis-material : iobroker - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker - enabled system.adapter.vis-metro.0 : vis-metro : iobroker - enabled system.adapter.vis-players.0 : vis-players : iobroker - enabled system.adapter.vis-rgraph.0 : vis-rgraph : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker64Bit - enabled, port: 54321 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : iobroker - enabled, port: 1886, bind: 192.168.178.69 + system.adapter.pioneer_sc_vsx.0 : pioneer_sc_vsx : iobroker - enabled, port: 23 + system.adapter.sainlogic.0 : sainlogic : iobroker - enabled, port: 45000, bind: 192.168.178.69 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1881, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1882, bind: 192.168.178.69 + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.synology.1 : synology : iobroker - enabled, port: 5000 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.4 , installed 1.2.4 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "bosesoundtouch": 0.10.3 , installed 0.10.3 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "device-watcher": 2.9.1 , installed 2.9.2 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "evcc" : 0.0.10 , installed 0.0.10 Adapter "fb-checkpresence": 1.1.26, installed 1.1.26 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hekr" : 0.0.6 , installed 0.0.6 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "logparser" : 2.2.0 , installed 2.2.0 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "midea" : 0.0.7 , installed 0.1.0 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mqtt-client" : 1.6.3 , installed 1.6.3 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "octoprint" : 4.0.0 , installed 4.1.0 Adapter "parcel" : 0.0.27 , installed 0.0.30 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "psa" : 0.0.11 , installed 0.0.11 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "s7" : 1.3.15 , installed 1.3.15 Adapter "sainlogic" : 0.10.3 , installed 0.10.4 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "worx" : 2.1.3 , installed 2.1.3 Adapter "ws" : 1.3.0 , installed 1.3.0 Objects and States Please stand by - This may take a while Objects: 27580 States: 23295 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.69:1886 0.0.0.0:* LISTEN 1001 21459 2570/io.mqtt.3 tcp 0 0 192.168.178.69:1887 0.0.0.0:* LISTEN 1001 21460 2570/io.mqtt.3 tcp 0 0 192.168.178.69:1882 0.0.0.0:* LISTEN 1001 21403 2553/io.sonoff.0 tcp 0 0 192.168.178.69:2000 0.0.0.0:* LISTEN 1001 19045 2197/io.hm-rpc.2 tcp 0 0 192.168.178.69:2001 0.0.0.0:* LISTEN 1001 20848 2157/io.hm-rpc.1 tcp 0 0 192.168.178.69:2010 0.0.0.0:* LISTEN 1001 19188 2446/io.hm-rpc.3 tcp 0 0 192.168.178.69:8701 0.0.0.0:* LISTEN 1001 20800 1913/io.hm-rpc.0 tcp 0 0 192.168.178.69:45000 0.0.0.0:* LISTEN 1001 29710 3252/io.sainlogic.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 14060 936/exim4 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 21314 2480/io.mqtt.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 21313 2480/io.mqtt.1 tcp 0 0 0.0.0.0:1881 0.0.0.0:* LISTEN 1001 23176 2630/io.shelly.1 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 13897 526/cupsd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16198 592/sshd: /usr/sbin tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 17539 535/iobroker.js-con tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 16777 535/iobroker.js-con tcp6 0 0 :::8087 :::* LISTEN 1001 28160 3371/io.simple-api. tcp6 0 0 :::8082 :::* LISTEN 1001 40170 4633/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 17096 1621/io.admin.0 tcp6 0 0 :::8000 :::* LISTEN 1001 45882 3059/io.upnp.0 tcp6 0 0 ::1:25 :::* LISTEN 0 14061 936/exim4 tcp6 0 0 :::22 :::* LISTEN 0 16200 592/sshd: /usr/sbin tcp6 0 0 :::80 :::* LISTEN 0 16221 649/apache2 tcp6 0 0 ::1:631 :::* LISTEN 0 13896 526/cupsd udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 75778 9130/io.broadlink2. udp 0 0 0.0.0.0:52576 0.0.0.0:* 1001 75786 9130/io.broadlink2. udp 0 0 0.0.0.0:57313 0.0.0.0:* 1001 75783 9130/io.broadlink2. udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16722 454/dhcpcd udp 0 0 0.0.0.0:33083 0.0.0.0:* 1001 27739 3059/io.upnp.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 12060 580/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11843 394/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 21346 2538/io.shelly.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 26611 3059/io.upnp.0 udp 0 0 0.0.0.0:39221 0.0.0.0:* 108 11845 394/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 22319 2619/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 22320 2619/io.tuya.0 udp6 0 0 :::546 :::* 0 14291 454/dhcpcd udp6 0 0 :::5353 :::* 108 11844 394/avahi-daemon: r udp6 0 0 :::58850 :::* 108 11846 394/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-07-16 19:00:53.053 - info: parcel.0 (3228) terminating 2023-07-16 19:00:53.056 - info: parcel.0 (3228) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-07-16 19:00:53.218 - info: host.iobroker stopInstance system.adapter.parcel.0 send kill signal 2023-07-16 19:00:53.875 - info: host.iobroker instance system.adapter.parcel.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-07-16 19:00:54.171 - info: host.iobroker iobroker exit 0 2023-07-16 19:00:56.468 - info: web.0 (4633) ==> Connected system.user.admin from ::ffff:192.168.178.6 2023-07-16 19:00:58.836 - info: host.iobroker instance system.adapter.parcel.0 started with pid 4264 2023-07-16 19:01:11.127 - info: parcel.0 (4264) starting. Version 0.0.30 (non-npm: TA2k/ioBroker.parcel#ace65142356e3f2abcce759beead0c580a6279b3) in /opt/iobroker/node_modules/iobroker.parcel, node: v18.16.1, js-controller: 4.0.24 2023-07-16 19:01:11.238 - info: parcel.0 (4264) Login to DHL 2023-07-16 19:01:14.207 - info: parcel.0 (4264) Login to DHL successful 2023-07-16 19:01:14.343 - info: parcel.0 (4264) Login to Amazon 2023-07-16 19:01:15.056 - info: web.0 (4633) <== Disconnect system.user.admin from ::ffff:192.168.178.2 energiefluss.0 2023-07-16 19:01:15.070 - info: web.0 (4633) <== Disconnect system.user.admin from ::ffff:192.168.178.2 vis.0 2023-07-16 19:01:16.819 - info: parcel.0 (4264) Login to Amazon successful 2023-07-16 19:01:16.822 - info: parcel.0 (4264) Login to Hermes 2023-07-16 19:01:17.198 - info: parcel.0 (4264) Login to Hermes successful 2023-07-16 19:01:17.843 - info: web.0 (4633) ==> Connected system.user.admin from ::ffff:192.168.178.2 2023-07-16 19:01:19.155 - info: web.0 (4633) ==> Connected system.user.admin from ::ffff:192.168.178.2 2023-07-16 19:01:30.771 - info: admin.0 (1621) ==> Connected system.user.admin from ::ffff:192.168.178.52 2023-07-16 19:01:43.064 - info: web.0 (4633) <== Disconnect system.user.admin from ::ffff:192.168.178.6 vis.0 2023-07-16 19:02:00.084 - info: host.iobroker instance system.adapter.luftdaten.0 started with pid 4675 2023-07-16 19:02:05.912 - info: luftdaten.0 (4675) starting. Version 3.0.0 in /opt/iobroker/node_modules/iobroker.luftdaten, node: v18.16.1, js-controller: 4.0.24 2023-07-16 19:02:06.966 - info: luftdaten.0 (4675) Terminated (NO_ERROR): Without reason 2023-07-16 19:02:07.562 - info: host.iobroker instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR) 2023-07-16 19:04:00.078 - info: host.iobroker instance system.adapter.luftdaten.0 started with pid 5661============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
Copy text starting here:======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 11 (bullseye) Kernel: 6.1.25-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 1 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 7.8G 2.7G 681M 40M 4.5G 5.0G Swap: 99M 0B 99M Total: 7.9G 2.7G 781M Active iob-Instances: 63 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 27580 States: 23295 Size of iob-Database: 26M /opt/iobroker/iobroker-data/objects.jsonl 8.4M /opt/iobroker/iobroker-data/objects.json.migrated 8.4M /opt/iobroker/iobroker-data/objects.json.bak.migrated 26M /opt/iobroker/iobroker-data/states.jsonl 1.8M /opt/iobroker/iobroker-data/states.json.migrated 1.8M /opt/iobroker/iobroker-data/states.json.bak.migrated =================== END OF SUMMARY ====================der 64bit
pi@IoBroker64Bit:~ $ iob diag
*** ioBroker Diagnosis ***
Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!Press any key to continue
======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 19:07:45 up 49 days, 17:57, 3 users, load average: 0.34, 0.19, 0.19 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=54.0'C volt=0.9360V *** Time and Time Zones *** Local time: Sun 2023-07-16 19:07:45 CEST Universal time: Sun 2023-07-16 17:07:45 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 1.8G 648M 305M 35M 893M 1.1G Swap: 99M 97M 2.0M Total: 1.9G 746M 308M 1848 M total memory 649 M used memory 837 M active memory 483 M inactive memory 305 M free memory 63 M buffer memory 830 M swap cache 99 M total swap 97 M used swap 2 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 6.0G 105G 6% / devtmpfs devtmpfs 667M 0 667M 0% /dev tmpfs tmpfs 925M 4.0K 925M 1% /dev/shm tmpfs tmpfs 370M 1.2M 369M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 185M 20K 185M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun May 28 01:09:47 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:41:AE:9B vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=1e440e54-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Sun May 28 01:09:49 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Sun May 28 01:09:49 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Sun May 28 01:09:50 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,stripe=8191 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.5G /var/ 635M /var/log 633M /var/log/journal/122b3afb23014f43b9b08ad8562e656b 633M /var/log/journal 577M /var/cache Archived and active journals take up 632.0M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 17M /opt/iobroker/iobroker-data/ 14M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static 13M /opt/iobroker/iobroker-data/files/admin.admin/custom The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.9M /opt/iobroker/iobroker-data/objects.jsonl 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map 652K /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.1-deb-1nodesource1 Candidate: 18.16.1-deb-1nodesource1 Version table: *** 18.16.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: "javascript" not found Adapters from github: 4 Adapter State + system.adapter.accuweather.0 : accuweather : IoBroker64Bit - enabled + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.bosesoundtouch.0 : bosesoundtouch : iobroker - enabled + system.adapter.broadlink2.0 : broadlink2 : iobroker - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker - enabled system.adapter.devices.0 : devices : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - enabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.energiefluss.0 : energiefluss : iobroker - enabled + system.adapter.envertech-pv.0 : envertech-pv : iobroker - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker - enabled + system.adapter.ham.0 : ham : iobroker - enabled + system.adapter.hekr.0 : hekr : IoBroker64Bit - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.logparser.0 : logparser : iobroker - enabled system.adapter.luftdaten.0 : luftdaten : iobroker - enabled + system.adapter.midea.0 : midea : IoBroker64Bit - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker64Bit - enabled, port: 54321 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : iobroker - enabled, port: 1886, bind: 192.168.178.69 + system.adapter.nuki.0 : nuki : IoBroker64Bit - enabled + system.adapter.nuki.1 : nuki : IoBroker64Bit - enabled + system.adapter.octoprint.0 : octoprint : iobroker - enabled + system.adapter.octoprint.1 : octoprint : iobroker - enabled + system.adapter.parcel.0 : parcel : iobroker - enabled + system.adapter.pi-hole.0 : pi-hole : iobroker - enabled + system.adapter.pioneer_sc_vsx.0 : pioneer_sc_vsx : iobroker - enabled, port: 23 + system.adapter.psa.0 : psa : iobroker - enabled + system.adapter.pvforecast.0 : pvforecast : iobroker - enabled + system.adapter.rpi2.0 : rpi2 : iobroker - enabled + system.adapter.rpi2.1 : rpi2 : IoBroker64Bit - enabled + system.adapter.s7.0 : s7 : iobroker - enabled + system.adapter.sainlogic.0 : sainlogic : iobroker - enabled, port: 45000, bind: 192.168.178.69 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1881, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1882, bind: 192.168.178.69 + system.adapter.sql.0 : sql : iobroker - enabled + system.adapter.switchbot-hub.0 : switchbot-hub : IoBroker64Bit - enabled + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.synology.1 : synology : iobroker - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : IoBroker64Bit - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled + system.adapter.upnp.0 : upnp : iobroker - enabled system.adapter.vis-bars.0 : vis-bars : iobroker - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker - enabled system.adapter.vis-history.0 : vis-history : iobroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - enabled system.adapter.vis-material.0 : vis-material : iobroker - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker - enabled system.adapter.vis-metro.0 : vis-metro : iobroker - enabled system.adapter.vis-players.0 : vis-players : iobroker - enabled system.adapter.vis-rgraph.0 : vis-rgraph : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker64Bit - enabled, port: 54321 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : iobroker - enabled, port: 1886, bind: 192.168.178.69 + system.adapter.pioneer_sc_vsx.0 : pioneer_sc_vsx : iobroker - enabled, port: 23 + system.adapter.sainlogic.0 : sainlogic : iobroker - enabled, port: 45000, bind: 192.168.178.69 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1881, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1882, bind: 192.168.178.69 + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.synology.1 : synology : iobroker - enabled, port: 5000 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.4 , installed 1.2.4 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "device-watcher": 2.9.1 , installed 2.9.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "hekr" : 0.0.6 , installed 0.0.6 Adapter "info" : 1.9.26 , installed 1.9.26 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "midea" : 0.0.7 , installed 0.1.0 Adapter "mihome-vacuum": 3.11.0 , installed 3.11.0 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "upnp" : 1.0.21 , installed 1.0.21 Objects and States Please stand by - This may take a while Objects: 27580 States: 23295 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.76:9091 0.0.0.0:* LISTEN 1001 26883941 2988028/io.nuki.0 tcp 0 0 192.168.178.76:9092 0.0.0.0:* LISTEN 1001 26883014 2988043/io.nuki.1 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14903 560/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 26444796 2937070/cupsd tcp6 0 0 :::22 :::* LISTEN 0 14905 560/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 26444795 2937070/cupsd udp 0 0 0.0.0.0:68 0.0.0.0:* 0 2048 456/dhcpcd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 26883733 2987979/io.mihome-v udp 0 0 192.168.178.76:5353 0.0.0.0:* 1001 26884229 2987991/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12286 389/avahi-daemon: r udp 0 0 0.0.0.0:43531 0.0.0.0:* 108 12288 389/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 26876649 2986316/cups-browse udp6 0 0 :::59337 :::* 108 15361 389/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12287 389/avahi-daemon: r udp6 0 0 :::546 :::* 0 16613 456/dhcpcd *** Log File - Last 25 Lines *** 2023-07-16 18:48:39.840 - info: host.IoBroker64Bit Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2023-07-16 18:56:43.607 - info: nuki.0 (2988028) Bridge Info requested: http://192.168.178.8:8080/info?ts=2023-07-16T16:56:43Z&rnr=39694&hash=ea80a786891a2dc7a33d40b76db8c58e9ae13bf500d744f7c9f521b88d106afc 2023-07-16 18:56:46.597 - info: nuki.0 (2988028) Lock list requested: http://192.168.178.8:8080/list?ts=2023-07-16T16:56:46Z&rnr=49958&hash=6f0e6ac3a6751da5a75ed74b0dc0d6fb6f6250889bc9b2c53d052238f6138c37 2023-07-16 19:01:37.753 - info: host.IoBroker64Bit Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2023-07-16 19:01:47.032 - info: nuki.1 (2988043) Bridge Info requested: http://192.168.178.9:8080/info?ts=2023-07-16T17:01:46Z&rnr=28156&hash=5e49343f501edad9f32861727256cc90991e9c64f9143ff1c2ec2b539544f973 2023-07-16 19:01:50.033 - info: nuki.1 (2988043) Lock list requested: http://192.168.178.9:8080/list?ts=2023-07-16T17:01:49Z&rnr=24725&hash=db65f40b4c4365fb4fc0b2a94a3a10613175ca852aa07dd304341fc11292960a 2023-07-16 19:06:43.614 - info: nuki.0 (2988028) Bridge Info requested: http://192.168.178.8:8080/info?ts=2023-07-16T17:06:43Z&rnr=9299&hash=cc30b412ad8d89800fb5af26044f31fd83252112b6981ccd3ee0b263c1232054 2023-07-16 19:06:46.595 - info: nuki.0 (2988028) Lock list requested: http://192.168.178.8:8080/list?ts=2023-07-16T17:06:46Z&rnr=25840&hash=903cf318806a6856d9dbdadd83fb8865abaf18854c20036f634a395e781b0bfc============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
Copy text starting here:======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Debian GNU/Linux 11 (bullseye) Kernel: 6.1.25-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 1.8G 644M 321M 35M 882M 1.1G Swap: 99M 99M 0.0K Total: 1.9G 744M 321M Active iob-Instances: 63 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 27580 States: 23295 Size of iob-Database: 2.9M /opt/iobroker/iobroker-data/objects.jsonl 60K /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== -
pi@iobroker:~ $ iob diag
*** ioBroker Diagnosis ***
Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!Press any key to continue
======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 19:02:31 up 1:59, 3 users, load average: 2.06, 1.90, 1.80 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=59.9'C volt=0.9460V *** Time and Time Zones *** Local time: Sun 2023-07-16 19:02:31 CEST Universal time: Sun 2023-07-16 17:02:31 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 2.7G 607M 40M 4.5G 4.9G Swap: 99M 0B 99M Total: 7.9G 2.7G 707M 7811 M total memory 2747 M used memory 6054 M active memory 835 M inactive memory 607 M free memory 308 M buffer memory 4148 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 19G 93G 17% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 928K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 782M 24K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Jul 16 17:02:54 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:9F:6B:93 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=247e04bb-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Sun Jul 16 17:02:56 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Jul 16 17:02:56 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Sun Jul 16 17:02:58 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,stripe=8191 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 4.4G /var/ 3.7G /var/log/journal/ce513f1a44ff4c9dbd382eb66e08c51e 3.7G /var/log/journal 3.7G /var/log 477M /var/cache Archived and active journals take up 3.6G in the file system. /opt/iobroker/backups: 4.5G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.6G /opt/iobroker/iobroker-data/ 754M /opt/iobroker/iobroker-data/sqlite 686M /opt/iobroker/iobroker-data/files 126M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 754M /opt/iobroker/iobroker-data/sqlite/sqlite.db 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/states.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.1-deb-1nodesource1 Candidate: 18.16.1-deb-1nodesource1 Version table: *** 18.16.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 7.0.3 Adapters from github: 16 Adapter State + system.adapter.accuweather.0 : accuweather : IoBroker64Bit - enabled + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.bosesoundtouch.0 : bosesoundtouch : iobroker - enabled + system.adapter.broadlink2.0 : broadlink2 : iobroker - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker - enabled system.adapter.devices.0 : devices : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - enabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.energiefluss.0 : energiefluss : iobroker - enabled + system.adapter.envertech-pv.0 : envertech-pv : iobroker - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker - enabled + system.adapter.ham.0 : ham : iobroker - enabled + system.adapter.hekr.0 : hekr : IoBroker64Bit - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.logparser.0 : logparser : iobroker - enabled system.adapter.luftdaten.0 : luftdaten : iobroker - enabled + system.adapter.midea.0 : midea : IoBroker64Bit - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker64Bit - enabled, port: 54321 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : iobroker - enabled, port: 1886, bind: 192.168.178.69 + system.adapter.nuki.0 : nuki : IoBroker64Bit - enabled + system.adapter.nuki.1 : nuki : IoBroker64Bit - enabled + system.adapter.octoprint.0 : octoprint : iobroker - enabled + system.adapter.octoprint.1 : octoprint : iobroker - enabled + system.adapter.parcel.0 : parcel : iobroker - enabled + system.adapter.pi-hole.0 : pi-hole : iobroker - enabled + system.adapter.pioneer_sc_vsx.0 : pioneer_sc_vsx : iobroker - enabled, port: 23 + system.adapter.psa.0 : psa : iobroker - enabled + system.adapter.pvforecast.0 : pvforecast : iobroker - enabled + system.adapter.rpi2.0 : rpi2 : iobroker - enabled + system.adapter.rpi2.1 : rpi2 : IoBroker64Bit - enabled + system.adapter.s7.0 : s7 : iobroker - enabled + system.adapter.sainlogic.0 : sainlogic : iobroker - enabled, port: 45000, bind: 192.168.178.69 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1881, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1882, bind: 192.168.178.69 + system.adapter.sql.0 : sql : iobroker - enabled + system.adapter.switchbot-hub.0 : switchbot-hub : IoBroker64Bit - enabled + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.synology.1 : synology : iobroker - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : IoBroker64Bit - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled + system.adapter.upnp.0 : upnp : iobroker - enabled system.adapter.vis-bars.0 : vis-bars : iobroker - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker - enabled system.adapter.vis-history.0 : vis-history : iobroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - enabled system.adapter.vis-material.0 : vis-material : iobroker - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker - enabled system.adapter.vis-metro.0 : vis-metro : iobroker - enabled system.adapter.vis-players.0 : vis-players : iobroker - enabled system.adapter.vis-rgraph.0 : vis-rgraph : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker64Bit - enabled, port: 54321 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : iobroker - enabled, port: 1886, bind: 192.168.178.69 + system.adapter.pioneer_sc_vsx.0 : pioneer_sc_vsx : iobroker - enabled, port: 23 + system.adapter.sainlogic.0 : sainlogic : iobroker - enabled, port: 45000, bind: 192.168.178.69 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1881, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1882, bind: 192.168.178.69 + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.synology.1 : synology : iobroker - enabled, port: 5000 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.4 , installed 1.2.4 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "bosesoundtouch": 0.10.3 , installed 0.10.3 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "device-watcher": 2.9.1 , installed 2.9.2 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "evcc" : 0.0.10 , installed 0.0.10 Adapter "fb-checkpresence": 1.1.26, installed 1.1.26 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hekr" : 0.0.6 , installed 0.0.6 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "logparser" : 2.2.0 , installed 2.2.0 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "midea" : 0.0.7 , installed 0.1.0 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mqtt-client" : 1.6.3 , installed 1.6.3 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "octoprint" : 4.0.0 , installed 4.1.0 Adapter "parcel" : 0.0.27 , installed 0.0.30 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "psa" : 0.0.11 , installed 0.0.11 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "s7" : 1.3.15 , installed 1.3.15 Adapter "sainlogic" : 0.10.3 , installed 0.10.4 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "worx" : 2.1.3 , installed 2.1.3 Adapter "ws" : 1.3.0 , installed 1.3.0 Objects and States Please stand by - This may take a while Objects: 27580 States: 23295 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.69:1886 0.0.0.0:* LISTEN 1001 21459 2570/io.mqtt.3 tcp 0 0 192.168.178.69:1887 0.0.0.0:* LISTEN 1001 21460 2570/io.mqtt.3 tcp 0 0 192.168.178.69:1882 0.0.0.0:* LISTEN 1001 21403 2553/io.sonoff.0 tcp 0 0 192.168.178.69:2000 0.0.0.0:* LISTEN 1001 19045 2197/io.hm-rpc.2 tcp 0 0 192.168.178.69:2001 0.0.0.0:* LISTEN 1001 20848 2157/io.hm-rpc.1 tcp 0 0 192.168.178.69:2010 0.0.0.0:* LISTEN 1001 19188 2446/io.hm-rpc.3 tcp 0 0 192.168.178.69:8701 0.0.0.0:* LISTEN 1001 20800 1913/io.hm-rpc.0 tcp 0 0 192.168.178.69:45000 0.0.0.0:* LISTEN 1001 29710 3252/io.sainlogic.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 14060 936/exim4 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 21314 2480/io.mqtt.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 21313 2480/io.mqtt.1 tcp 0 0 0.0.0.0:1881 0.0.0.0:* LISTEN 1001 23176 2630/io.shelly.1 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 13897 526/cupsd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16198 592/sshd: /usr/sbin tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 17539 535/iobroker.js-con tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 16777 535/iobroker.js-con tcp6 0 0 :::8087 :::* LISTEN 1001 28160 3371/io.simple-api. tcp6 0 0 :::8082 :::* LISTEN 1001 40170 4633/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 17096 1621/io.admin.0 tcp6 0 0 :::8000 :::* LISTEN 1001 45882 3059/io.upnp.0 tcp6 0 0 ::1:25 :::* LISTEN 0 14061 936/exim4 tcp6 0 0 :::22 :::* LISTEN 0 16200 592/sshd: /usr/sbin tcp6 0 0 :::80 :::* LISTEN 0 16221 649/apache2 tcp6 0 0 ::1:631 :::* LISTEN 0 13896 526/cupsd udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 75778 9130/io.broadlink2. udp 0 0 0.0.0.0:52576 0.0.0.0:* 1001 75786 9130/io.broadlink2. udp 0 0 0.0.0.0:57313 0.0.0.0:* 1001 75783 9130/io.broadlink2. udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16722 454/dhcpcd udp 0 0 0.0.0.0:33083 0.0.0.0:* 1001 27739 3059/io.upnp.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 12060 580/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11843 394/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 21346 2538/io.shelly.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 26611 3059/io.upnp.0 udp 0 0 0.0.0.0:39221 0.0.0.0:* 108 11845 394/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 22319 2619/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 22320 2619/io.tuya.0 udp6 0 0 :::546 :::* 0 14291 454/dhcpcd udp6 0 0 :::5353 :::* 108 11844 394/avahi-daemon: r udp6 0 0 :::58850 :::* 108 11846 394/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-07-16 19:00:53.053 - info: parcel.0 (3228) terminating 2023-07-16 19:00:53.056 - info: parcel.0 (3228) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-07-16 19:00:53.218 - info: host.iobroker stopInstance system.adapter.parcel.0 send kill signal 2023-07-16 19:00:53.875 - info: host.iobroker instance system.adapter.parcel.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-07-16 19:00:54.171 - info: host.iobroker iobroker exit 0 2023-07-16 19:00:56.468 - info: web.0 (4633) ==> Connected system.user.admin from ::ffff:192.168.178.6 2023-07-16 19:00:58.836 - info: host.iobroker instance system.adapter.parcel.0 started with pid 4264 2023-07-16 19:01:11.127 - info: parcel.0 (4264) starting. Version 0.0.30 (non-npm: TA2k/ioBroker.parcel#ace65142356e3f2abcce759beead0c580a6279b3) in /opt/iobroker/node_modules/iobroker.parcel, node: v18.16.1, js-controller: 4.0.24 2023-07-16 19:01:11.238 - info: parcel.0 (4264) Login to DHL 2023-07-16 19:01:14.207 - info: parcel.0 (4264) Login to DHL successful 2023-07-16 19:01:14.343 - info: parcel.0 (4264) Login to Amazon 2023-07-16 19:01:15.056 - info: web.0 (4633) <== Disconnect system.user.admin from ::ffff:192.168.178.2 energiefluss.0 2023-07-16 19:01:15.070 - info: web.0 (4633) <== Disconnect system.user.admin from ::ffff:192.168.178.2 vis.0 2023-07-16 19:01:16.819 - info: parcel.0 (4264) Login to Amazon successful 2023-07-16 19:01:16.822 - info: parcel.0 (4264) Login to Hermes 2023-07-16 19:01:17.198 - info: parcel.0 (4264) Login to Hermes successful 2023-07-16 19:01:17.843 - info: web.0 (4633) ==> Connected system.user.admin from ::ffff:192.168.178.2 2023-07-16 19:01:19.155 - info: web.0 (4633) ==> Connected system.user.admin from ::ffff:192.168.178.2 2023-07-16 19:01:30.771 - info: admin.0 (1621) ==> Connected system.user.admin from ::ffff:192.168.178.52 2023-07-16 19:01:43.064 - info: web.0 (4633) <== Disconnect system.user.admin from ::ffff:192.168.178.6 vis.0 2023-07-16 19:02:00.084 - info: host.iobroker instance system.adapter.luftdaten.0 started with pid 4675 2023-07-16 19:02:05.912 - info: luftdaten.0 (4675) starting. Version 3.0.0 in /opt/iobroker/node_modules/iobroker.luftdaten, node: v18.16.1, js-controller: 4.0.24 2023-07-16 19:02:06.966 - info: luftdaten.0 (4675) Terminated (NO_ERROR): Without reason 2023-07-16 19:02:07.562 - info: host.iobroker instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR) 2023-07-16 19:04:00.078 - info: host.iobroker instance system.adapter.luftdaten.0 started with pid 5661============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
Copy text starting here:======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 11 (bullseye) Kernel: 6.1.25-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 1 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 7.8G 2.7G 681M 40M 4.5G 5.0G Swap: 99M 0B 99M Total: 7.9G 2.7G 781M Active iob-Instances: 63 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 27580 States: 23295 Size of iob-Database: 26M /opt/iobroker/iobroker-data/objects.jsonl 8.4M /opt/iobroker/iobroker-data/objects.json.migrated 8.4M /opt/iobroker/iobroker-data/objects.json.bak.migrated 26M /opt/iobroker/iobroker-data/states.jsonl 1.8M /opt/iobroker/iobroker-data/states.json.migrated 1.8M /opt/iobroker/iobroker-data/states.json.bak.migrated =================== END OF SUMMARY ==================== -
@thomas-braun said in Raspberry Pi 8gb swap aktivieren:
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
X-Server: true
Schalt die GUI aus.
Jetzt stehe ich auf dem Schlauch, bei beiden installationen und wie schalte ich ihn ab ?
-
@thomas-braun said in Raspberry Pi 8gb swap aktivieren:
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
X-Server: true
Schalt die GUI aus.
Jetzt stehe ich auf dem Schlauch, bei beiden installationen und wie schalte ich ihn ab ?
Da beide als Server fungieren: Ja, bei beiden Installationen.
1 System Options S5 Boot / Auto Login B1 Console -
der 64bit
pi@IoBroker64Bit:~ $ iob diag
*** ioBroker Diagnosis ***
Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!Press any key to continue
======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 19:07:45 up 49 days, 17:57, 3 users, load average: 0.34, 0.19, 0.19 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=54.0'C volt=0.9360V *** Time and Time Zones *** Local time: Sun 2023-07-16 19:07:45 CEST Universal time: Sun 2023-07-16 17:07:45 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 1.8G 648M 305M 35M 893M 1.1G Swap: 99M 97M 2.0M Total: 1.9G 746M 308M 1848 M total memory 649 M used memory 837 M active memory 483 M inactive memory 305 M free memory 63 M buffer memory 830 M swap cache 99 M total swap 97 M used swap 2 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 6.0G 105G 6% / devtmpfs devtmpfs 667M 0 667M 0% /dev tmpfs tmpfs 925M 4.0K 925M 1% /dev/shm tmpfs tmpfs 370M 1.2M 369M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 185M 20K 185M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun May 28 01:09:47 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:41:AE:9B vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=1e440e54-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Sun May 28 01:09:49 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Sun May 28 01:09:49 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Sun May 28 01:09:50 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,stripe=8191 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.5G /var/ 635M /var/log 633M /var/log/journal/122b3afb23014f43b9b08ad8562e656b 633M /var/log/journal 577M /var/cache Archived and active journals take up 632.0M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 17M /opt/iobroker/iobroker-data/ 14M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static 13M /opt/iobroker/iobroker-data/files/admin.admin/custom The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.9M /opt/iobroker/iobroker-data/objects.jsonl 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map 652K /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.1-deb-1nodesource1 Candidate: 18.16.1-deb-1nodesource1 Version table: *** 18.16.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: "javascript" not found Adapters from github: 4 Adapter State + system.adapter.accuweather.0 : accuweather : IoBroker64Bit - enabled + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.bosesoundtouch.0 : bosesoundtouch : iobroker - enabled + system.adapter.broadlink2.0 : broadlink2 : iobroker - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker - enabled system.adapter.devices.0 : devices : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - enabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.energiefluss.0 : energiefluss : iobroker - enabled + system.adapter.envertech-pv.0 : envertech-pv : iobroker - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker - enabled + system.adapter.ham.0 : ham : iobroker - enabled + system.adapter.hekr.0 : hekr : IoBroker64Bit - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.logparser.0 : logparser : iobroker - enabled system.adapter.luftdaten.0 : luftdaten : iobroker - enabled + system.adapter.midea.0 : midea : IoBroker64Bit - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker64Bit - enabled, port: 54321 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : iobroker - enabled, port: 1886, bind: 192.168.178.69 + system.adapter.nuki.0 : nuki : IoBroker64Bit - enabled + system.adapter.nuki.1 : nuki : IoBroker64Bit - enabled + system.adapter.octoprint.0 : octoprint : iobroker - enabled + system.adapter.octoprint.1 : octoprint : iobroker - enabled + system.adapter.parcel.0 : parcel : iobroker - enabled + system.adapter.pi-hole.0 : pi-hole : iobroker - enabled + system.adapter.pioneer_sc_vsx.0 : pioneer_sc_vsx : iobroker - enabled, port: 23 + system.adapter.psa.0 : psa : iobroker - enabled + system.adapter.pvforecast.0 : pvforecast : iobroker - enabled + system.adapter.rpi2.0 : rpi2 : iobroker - enabled + system.adapter.rpi2.1 : rpi2 : IoBroker64Bit - enabled + system.adapter.s7.0 : s7 : iobroker - enabled + system.adapter.sainlogic.0 : sainlogic : iobroker - enabled, port: 45000, bind: 192.168.178.69 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1881, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1882, bind: 192.168.178.69 + system.adapter.sql.0 : sql : iobroker - enabled + system.adapter.switchbot-hub.0 : switchbot-hub : IoBroker64Bit - enabled + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.synology.1 : synology : iobroker - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : IoBroker64Bit - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled + system.adapter.upnp.0 : upnp : iobroker - enabled system.adapter.vis-bars.0 : vis-bars : iobroker - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker - enabled system.adapter.vis-history.0 : vis-history : iobroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - enabled system.adapter.vis-material.0 : vis-material : iobroker - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker - enabled system.adapter.vis-metro.0 : vis-metro : iobroker - enabled system.adapter.vis-players.0 : vis-players : iobroker - enabled system.adapter.vis-rgraph.0 : vis-rgraph : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker64Bit - enabled, port: 54321 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : iobroker - enabled, port: 1886, bind: 192.168.178.69 + system.adapter.pioneer_sc_vsx.0 : pioneer_sc_vsx : iobroker - enabled, port: 23 + system.adapter.sainlogic.0 : sainlogic : iobroker - enabled, port: 45000, bind: 192.168.178.69 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1881, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1882, bind: 192.168.178.69 + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.synology.1 : synology : iobroker - enabled, port: 5000 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.4 , installed 1.2.4 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "device-watcher": 2.9.1 , installed 2.9.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "hekr" : 0.0.6 , installed 0.0.6 Adapter "info" : 1.9.26 , installed 1.9.26 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "midea" : 0.0.7 , installed 0.1.0 Adapter "mihome-vacuum": 3.11.0 , installed 3.11.0 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "upnp" : 1.0.21 , installed 1.0.21 Objects and States Please stand by - This may take a while Objects: 27580 States: 23295 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.76:9091 0.0.0.0:* LISTEN 1001 26883941 2988028/io.nuki.0 tcp 0 0 192.168.178.76:9092 0.0.0.0:* LISTEN 1001 26883014 2988043/io.nuki.1 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14903 560/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 26444796 2937070/cupsd tcp6 0 0 :::22 :::* LISTEN 0 14905 560/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 26444795 2937070/cupsd udp 0 0 0.0.0.0:68 0.0.0.0:* 0 2048 456/dhcpcd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 26883733 2987979/io.mihome-v udp 0 0 192.168.178.76:5353 0.0.0.0:* 1001 26884229 2987991/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12286 389/avahi-daemon: r udp 0 0 0.0.0.0:43531 0.0.0.0:* 108 12288 389/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 26876649 2986316/cups-browse udp6 0 0 :::59337 :::* 108 15361 389/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12287 389/avahi-daemon: r udp6 0 0 :::546 :::* 0 16613 456/dhcpcd *** Log File - Last 25 Lines *** 2023-07-16 18:48:39.840 - info: host.IoBroker64Bit Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2023-07-16 18:56:43.607 - info: nuki.0 (2988028) Bridge Info requested: http://192.168.178.8:8080/info?ts=2023-07-16T16:56:43Z&rnr=39694&hash=ea80a786891a2dc7a33d40b76db8c58e9ae13bf500d744f7c9f521b88d106afc 2023-07-16 18:56:46.597 - info: nuki.0 (2988028) Lock list requested: http://192.168.178.8:8080/list?ts=2023-07-16T16:56:46Z&rnr=49958&hash=6f0e6ac3a6751da5a75ed74b0dc0d6fb6f6250889bc9b2c53d052238f6138c37 2023-07-16 19:01:37.753 - info: host.IoBroker64Bit Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2023-07-16 19:01:47.032 - info: nuki.1 (2988043) Bridge Info requested: http://192.168.178.9:8080/info?ts=2023-07-16T17:01:46Z&rnr=28156&hash=5e49343f501edad9f32861727256cc90991e9c64f9143ff1c2ec2b539544f973 2023-07-16 19:01:50.033 - info: nuki.1 (2988043) Lock list requested: http://192.168.178.9:8080/list?ts=2023-07-16T17:01:49Z&rnr=24725&hash=db65f40b4c4365fb4fc0b2a94a3a10613175ca852aa07dd304341fc11292960a 2023-07-16 19:06:43.614 - info: nuki.0 (2988028) Bridge Info requested: http://192.168.178.8:8080/info?ts=2023-07-16T17:06:43Z&rnr=9299&hash=cc30b412ad8d89800fb5af26044f31fd83252112b6981ccd3ee0b263c1232054 2023-07-16 19:06:46.595 - info: nuki.0 (2988028) Lock list requested: http://192.168.178.8:8080/list?ts=2023-07-16T17:06:46Z&rnr=25840&hash=903cf318806a6856d9dbdadd83fb8865abaf18854c20036f634a395e781b0bfc============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
Copy text starting here:======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Debian GNU/Linux 11 (bullseye) Kernel: 6.1.25-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 1.8G 644M 321M 35M 882M 1.1G Swap: 99M 99M 0.0K Total: 1.9G 744M 321M Active iob-Instances: 63 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 27580 States: 23295 Size of iob-Database: 2.9M /opt/iobroker/iobroker-data/objects.jsonl 60K /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
Active iob-Instances: 63
Und das verteilt sich wie?
Auf dem kleineren System ist dein SWAP ausgereizt, sicheres Zeichen für zuwenig RAM.
-
Da beide als Server fungieren: Ja, bei beiden Installationen.
1 System Options S5 Boot / Auto Login B1 Console@thomas-braun said in Raspberry Pi 8gb swap aktivieren:
Da beide als Server fungieren: Ja, bei beiden Installationen.
1 System Options S5 Boot / Auto Login B1 Consoleauch grade gefunden, Danke :-)
-
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
Active iob-Instances: 63
Und das verteilt sich wie?
Auf dem kleineren System ist dein SWAP ausgereizt, sicheres Zeichen für zuwenig RAM.
@thomas-braun said in Raspberry Pi 8gb swap aktivieren:
@michaelf sagte in Raspberry Pi 8gb swap aktivieren:
Active iob-Instances: 63
Und das verteilt sich wie?
Auf dem kleineren System ist dein SWAP ausgereizt, sicheres Zeichen für zuwenig RAM.
Jetzt sieht es besser aus :
pi@IoBroker64Bit:~ $ free -m gesamt benutzt frei gemns. Puffer/Cache verfügbar Speicher: 1848 489 945 1 412 1295 Swap: 99 0 99 pi@IoBroker64Bit:~ $
292
Online32.6k
Benutzer82.1k
Themen1.3m
Beiträge