@shaarkys if you have any questions - don't hesitate to ask

@robocop [gelöst] hoffe ich:! in der Config auf D3 einen Switch_n "1" und unter D7 einen Switch "2" eingerichtet. SwitchMode3 1 sollte so funktionieren... mal sehen wie lange die Batterien(Akkus) halten bei einem DeepSleepTime 1200 und einer TelePeriod von 20

@mickym Thanks! Update to 0.0.56 worked out with the direct Github install.

@rob-1 sagte in Open Gate: @homoran sorry i got nothing installed like this atm. I just wonder if i can do it somehow atm iam using siri and tell her to open or close gate but i would like it fully automated I do not know what for Apps are available in your area. Here some user are working with a geofencing app, connected to ioBroker. With this you can automate it. But be aware what will happen if you`re coming home from pub not really looking clearly ;-) with the phone in your pocket

@ap2017 sagte in Zigbee device availability detection: @thomas-braun I thought about it first, but switch does not show power when in ON state with no load connected, don't think load needs to be connected for voltage reading. Tried it with load connected, still does not read voltage. Just in case, I filed an issue at Zigbee github regarding not able to read voltage. [image: 1638468236254-272591ea-596d-4e45-84ac-2e7081cfdada-image.png] The load voltage state will also not be usable for connection detection. The reason is simple: A plug which is connected may update this state once every x minutes, with x usually being within the range of 5 to 300. If you power of the plug, it lacks the power to update the value, hence the state will remain at the last state sent by the plug. This is true for any state published by the plug. There are very few devices which publish their states in a short interval. Most only post changes to their values, and even then have a minimum time difference between posting different values. The available state has the same issue. It is generated by the adapter attempting to obtain a response from the device using a "ping request". In theory, all line powered devices should respond to ping requests. Unfortunately, there are line powered devices which report as "end devices" and as such will not report to ping requests, i.e. their status cannot easily be verified. A.

@homoran said in Not able to log in after latest ADMIN update: iobroker upgrade admin Fixed, thank you

@thomas-braun said in Adapter Update Log: Aber was willst du denn damit machen? Erst einmal die vorherige Version des Adapters installieren, damit zunächst alles wieder funktioniert. Wenn ich dann Zeit habe, kann ich auf die Fehlersuche gehen.

@apollon77 schon da https://github.com/ioBroker/ioBroker.discovery/issues/176

@ssond0815 Delivered should have been [image: 1629619781343-dimmer3.png] , I received this [image: 1629619801731-img_6909-resized.jpg]

@ap2017 Hi see this link https://www.youtube.com/watch?v=FZeWNwXC7rk&t=48s this work

@ap2017 yes, the zigbee connection strenght fluctuates also in my case. Since I have only two devices yet, I suppose this becomes more smooth if I have more devices running that create a tighter mesh network. In some weeks I will have some more devices running, let's see.

@normhenderson If the instance connects, the whole problem is usually that not the right registers are configured. I do not have the Victron CCGX but you should carefully read the register documentation of the Victron device and set the right one up in the adapter instance. Regarding your question 2: In my "holding register tab" I cannot find a separate SLAVE ID information. What exactly are you referring to? ad 3: If you configured the right registers, you will find values behind the data objects. I have to admit that the modbus is tricky if you are not familiar in the details of the protocol.

@david-g thanks my friend I understood what is going on, I will try myself now you had helped me enough, I will translate the words, I will found the solution now Thank you all for your help

@kristfrizh Thank you for the update! good to hear it works and good luck and have fun!