@kaiser21 machs mit dem Color Picker Mod https://forum.iobroker.net/topic/21515/tutorial-vis-colorpicker-cie-color-x-y Klappt eins A mit den leds von ikea.

@linedancer @UncleSam Danke euch zwei. Den Wiffi fand ich sehr interessant, hab ihn direkt bestellt. Mal schauen was ich damit noch machen kann ;-)

@j_wa eigentlich ist es ja egal, was man smart machen möchte, es kommt hier in erster Linie drauf an was man bereits an Aktoren verbaut hat und wie aufwendig es ist diese dann smart zu bekommen ;) Wie da_Woody geschrieben hat, wäre bei Deinem Rollladen Motor das mehr als einfach, da man hier ein Shelly 2 oder 2.5 einfach zwischen vorhandenem Schalter und Motor klemmt. WLAN sollte natürlich vorhanden sein. Wie dann das Programm zur Regelung aussieht, ist was anderes, aber auch kein Hexenwerk.

Ich habe mir das ganze ein wenig angeschaut und herum probiert, ich bekomme die Anzeige schon mal linksbündig, jetzt muss ich nur noch herausfinden wie ich die Werte rechtsbündig bekomme. Geändert habe ich die MMM-ioBroker.css Bei align habe ich flex-end gegen left ausgetauscht. .MMM-ioBroker .module-content .flex-item { /*margin: auto;*/ } .region.left .MMM-ioBroker .flex-container, .region.center .MMM-ioBroker .flex-container, .region.right .MMM-ioBroker .flex-container { flex-direction: column; -webkit-flex-direction: column; align-items: flex-end; -webkit-align-items: flex-end; max-width: 300px; } Edit: Nach ein wenig mehr Lesen und Probieren habe ich wieder alles zurückgestellt und jetzt bleibt die Darstellung linksbündig. Keine Ahnung, warum das ganze vorher zentriert war.

@zizu29 Du meinst den Typ des iot Gerätes? Nur "Schalter" (switch) ist sinnvoll. Was hättest du denn sonst nehmen wollen?

@bravestarr dann scheint bei dir enet ja zu laufen. Hast das Gateway oder den Server in Verwendung ? Ich versuche aktuell den Server einzubinden, komme hier aber nicht weiter :-( Von daher wäre mal nett von jemanden zu lesen, bei dem es funktioniert !

Hier sieht man nochmal sehr schön das die Lüfter ordentlich was bringen. Der Switch wird nicht mehr wärmer als 60 Grad und im Serverschrank wird es nicht wärmer als 30 Grad. Die Werte davor waren ohne Lüfter, aber mit offenen Seitenteil. [image: 1610107982586-unbekannt.jpg]

Hallo Zusammen, gibts zum Thema CO2-Melder und MQTT auch aktuellere Topics? Ich finde nur selbstbau-Lösungen mit EPS+Sensor. Finde aber die Erweiterung eines vollständigen Gehäuses ganz attraktiv. VG Tristan

Anleitung wurde upgedatet / weitergepflegt wegen Umzug auf Github !

@SamGlow Porsche Connect läuft nicht über VW CarNet. Daher muss ein separater Adapter geschaffen werden.

@Asgothian Mega! Es kann so einfach sein :man-facepalming: Vielen Dank!!!

@Ralla66 Habe gestern abend noch einen Beitrag gefunden womit es klappt falls es dich interessiert: https://forum.iobroker.net/topic/38407/sonoff-rf-bridge-tasmota-und-portisch-433mhz

@patrickbs96 uuid entfernt, sonst original Log-Daten beim Start vom Adapter 0.0.5 2020-12-12 21:52:35.356 - debug: twinkly.0 (5978) Redis Objects: Use Redis connection: 0.0.0.0:9001 2020-12-12 21:52:35.400 - debug: twinkly.0 (5978) Objects client ready ... initialize now 2020-12-12 21:52:35.404 - debug: twinkly.0 (5978) Objects create System PubSub Client 2020-12-12 21:52:35.405 - debug: twinkly.0 (5978) Objects create User PubSub Client 2020-12-12 21:52:35.407 - debug: twinkly.0 (5978) Objects client initialize lua scripts 2020-12-12 21:52:35.431 - debug: twinkly.0 (5978) Objects connected to redis: 0.0.0.0:9001 2020-12-12 21:52:35.439 - debug: twinkly.0 (5978) objectDB connected 2020-12-12 21:52:35.442 - debug: twinkly.0 (5978) Redis States: Use Redis connection: 0.0.0.0:9000 2020-12-12 21:52:35.455 - debug: twinkly.0 (5978) States create User PubSub Client 2020-12-12 21:52:35.459 - debug: twinkly.0 (5978) States create System PubSub Client 2020-12-12 21:52:35.479 - debug: twinkly.0 (5978) States connected to redis: 0.0.0.0:9000 2020-12-12 21:52:35.480 - debug: twinkly.0 (5978) statesDB connected 2020-12-12 21:52:38.402 - debug: twinkly.0 (5978) Plugin sentry Initialize Plugin (enabled=true) 2020-12-12 21:52:38.727 - info: twinkly.0 (5978) starting. Version 0.0.5 in /opt/iobroker/node_modules/iobroker.twinkly, node: v12.20.0, js-controller: 3.1.6 2020-12-12 21:52:38.766 - debug: twinkly.0 (5978) config devices: [{"enabled":true,"name":"Twinkly_37EFF1","host":"192.168.178.105","connectedState":""}] 2020-12-12 21:52:38.767 - debug: twinkly.0 (5978) config interval: 60 2020-12-12 21:52:38.767 - debug: twinkly.0 (5978) config deviceInfo: true 2020-12-12 21:52:38.768 - debug: twinkly.0 (5978) config mqtt: false 2020-12-12 21:52:38.769 - debug: twinkly.0 (5978) config timer: true 2020-12-12 21:52:38.769 - debug: twinkly.0 (5978) config reset: false 2020-12-12 21:52:38.771 - debug: twinkly.0 (5978) Prepare objects 2020-12-12 21:52:38.773 - debug: twinkly.0 (5978) Get existing objects 2020-12-12 21:52:38.930 - debug: twinkly.0 (5978) Prepare tasks of objects update 2020-12-12 21:52:38.932 - debug: twinkly.0 (5978) Start tasks of objects update 2020-12-12 21:52:38.934 - debug: twinkly.0 (5978) Task: {"type":"update_state","id":{"device":"Twinkly_37EFF1","state":"on"},"data":{"common":{"name":"Twinkly_37EFF1 eingeschaltet","read":true,"write":true,"type":"boolean","role":"switch","def":false}}}, ID: twinkly.0.Twinkly_37EFF1.on 2020-12-12 21:52:38.934 - debug: twinkly.0 (5978) Update state id=twinkly.0.Twinkly_37EFF1.on 2020-12-12 21:52:38.936 - debug: twinkly.0 (5978) Task: {"type":"update_state","id":{"device":"Twinkly_37EFF1","state":"mode"},"data":{"common":{"name":"Twinkly_37EFF1 Mode","read":true,"write":true,"type":"string","role":"state","def":"off","states":{"rt":"Real Time","movie":"Eingeschaltet","off":"Ausgeschaltet","playlist":"Playlist","demo":"Demo","effect":"Effect"}}}}, ID: twinkly.0.Twinkly_37EFF1.mode 2020-12-12 21:52:38.937 - debug: twinkly.0 (5978) Update state id=twinkly.0.Twinkly_37EFF1.mode 2020-12-12 21:52:38.937 - debug: twinkly.0 (5978) Task: {"type":"update_state","id":{"device":"Twinkly_37EFF1","state":"bri"},"data":{"common":{"name":"Twinkly_37EFF1 Brightness","read":true,"write":true,"type":"number","role":"level.dimmer","min":0,"max":100,"def":0}}}, ID: twinkly.0.Twinkly_37EFF1.bri 2020-12-12 21:52:38.938 - debug: twinkly.0 (5978) Update state id=twinkly.0.Twinkly_37EFF1.bri 2020-12-12 21:52:38.939 - debug: twinkly.0 (5978) Task: {"type":"update_state","id":{"device":"Twinkly_37EFF1","state":"name"},"data":{"common":{"name":"Twinkly_37EFF1 Name","read":true,"write":true,"type":"string","role":"info.name","def":""}}}, ID: twinkly.0.Twinkly_37EFF1.name 2020-12-12 21:52:38.939 - debug: twinkly.0 (5978) Update state id=twinkly.0.Twinkly_37EFF1.name 2020-12-12 21:52:38.940 - debug: twinkly.0 (5978) Task: {"type":"update_state","id":{"device":"Twinkly_37EFF1","state":"timer"},"data":{"common":{"name":"Twinkly_37EFF1 Timer","read":true,"write":true,"type":"string","role":"json","def":"{}"}}}, ID: twinkly.0.Twinkly_37EFF1.timer 2020-12-12 21:52:38.941 - debug: twinkly.0 (5978) Update state id=twinkly.0.Twinkly_37EFF1.timer 2020-12-12 21:52:38.941 - debug: twinkly.0 (5978) Task: {"type":"update_state","id":{"device":"Twinkly_37EFF1","state":"details"},"data":{"common":{"name":"Twinkly_37EFF1 Details","read":true,"write":false,"type":"string","role":"json","def":"{}"}}}, ID: twinkly.0.Twinkly_37EFF1.details 2020-12-12 21:52:38.942 - debug: twinkly.0 (5978) Update state id=twinkly.0.Twinkly_37EFF1.details 2020-12-12 21:52:38.942 - debug: twinkly.0 (5978) Task: {"type":"update_state","id":{"device":"Twinkly_37EFF1","state":"firmware"},"data":{"common":{"name":"Twinkly_37EFF1 Firmware","read":true,"write":false,"type":"string","role":"state","def":""}}}, ID: twinkly.0.Twinkly_37EFF1.firmware 2020-12-12 21:52:38.943 - debug: twinkly.0 (5978) Update state id=twinkly.0.Twinkly_37EFF1.firmware 2020-12-12 21:52:38.944 - debug: twinkly.0 (5978) Task: {"type":"update_state","id":{"device":"Twinkly_37EFF1","state":"connected"},"data":{"common":{"name":"Twinkly_37EFF1 Connected","read":true,"write":false,"type":"boolean","role":"indicator.connected","def":false}}}, ID: twinkly.0.Twinkly_37EFF1.connected 2020-12-12 21:52:38.944 - debug: twinkly.0 (5978) Update state id=twinkly.0.Twinkly_37EFF1.connected 2020-12-12 21:52:38.945 - debug: twinkly.0 (5978) Finished tasks of objects update 2020-12-12 21:52:43.778 - debug: twinkly.0 (5978) Start polling... 2020-12-12 21:52:43.779 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.on 2020-12-12 21:52:43.779 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.mode 2020-12-12 21:52:43.780 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:52:43.781 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token expired, will refresh 2020-12-12 21:52:43.820 - debug: twinkly.0 (5978) [sendPostHTTP] {"authentication_token":"RlUGEMhNU34=","authentication_token_expires_in":14400,"challenge-response":"2ce38f8fddc9a6f9ab0065ed35901787ad14b6fe","code":1000} 2020-12-12 21:52:43.822 - debug: twinkly.0 (5978) [Twinkly_37EFF1._post] , {"challenge-response":"2ce38f8fddc9a6f9ab0065ed35901787ad14b6fe"}, {"X-Auth-Token":"RlUGEMhNU34="} 2020-12-12 21:52:43.826 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:52:43.845 - debug: twinkly.0 (5978) [sendPostHTTP] {"code":1000} 2020-12-12 21:52:43.870 - debug: twinkly.0 (5978) [sendGetHTTP] {"mode":"off","shop_mode":0,"code":1000} 2020-12-12 21:52:43.872 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.bri 2020-12-12 21:52:43.873 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:52:43.874 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:52:43.894 - debug: twinkly.0 (5978) [sendGetHTTP] {"value":100,"mode":"disabled","code":1000} 2020-12-12 21:52:43.896 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.name 2020-12-12 21:52:43.896 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:52:43.897 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:52:43.918 - debug: twinkly.0 (5978) [sendGetHTTP] {"name":"Twinkly_37EFF1","code":1000} 2020-12-12 21:52:43.919 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.details 2020-12-12 21:52:43.920 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:52:43.920 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:52:43.939 - debug: twinkly.0 (5978) [sendGetHTTP] {"product_name":"Twinkly","hardware_version":"100","bytes_per_led":4,"hw_id":"37eff0","flash_size":64,"led_type":12,"product_code":"TWS250SPP","fw_family":"G","device_name":"Twinkly_37EFF1","uptime":"76075549","mac":"98:f4:ab:37:ef:f1","uuid":"","max_supported_led":1200,"number_of_led":250,"led_profile":"RGBW","frame_rate":19,"measured_frame_rate":21.28,"movie_capacity":992,"wire_type":1,"copyright":"LEDWORKS 2018","code":1000} 2020-12-12 21:52:43.941 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.firmware 2020-12-12 21:52:43.942 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:52:43.943 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:52:43.963 - debug: twinkly.0 (5978) [sendGetHTTP] {"version":"2.5.9","code":1000} 2020-12-12 21:52:43.965 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.timer 2020-12-12 21:52:43.966 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:52:43.967 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:52:43.986 - debug: twinkly.0 (5978) [sendGetHTTP] {"time_now":78759,"time_on":-1,"time_off":-1,"code":1000} 2020-12-12 21:52:43.988 - debug: twinkly.0 (5978) Finished polling... 2020-12-12 21:53:10.126 - debug: twinkly.0 (5978) state twinkly.0.Twinkly_37EFF1.on changed: true (ack = false) 2020-12-12 21:53:10.128 - debug: twinkly.0 (5978) [Twinkly_37EFF1._post] , {"mode":"movie"}, {"X-Auth-Token":"RlUGEMhNU34=","Content-Type":"application/json"} 2020-12-12 21:53:10.129 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:53:10.155 - debug: twinkly.0 (5978) [sendPostHTTP] {"code":1104} 2020-12-12 21:53:10.157 - error: twinkly.0 (5978) Could not set Twinkly_37EFF1.on [Twinkly_37EFF1.POST.led/mode] 1104 (Error - malformed JSON on input), Data: {"mode":"movie"}, Headers: {"X-Auth-Token":"RlUGEMhNU34=","Content-Type":"application/json"} 2020-12-12 21:53:17.833 - debug: twinkly.0 (5978) state twinkly.0.Twinkly_37EFF1.on changed: false (ack = false) 2020-12-12 21:53:17.835 - debug: twinkly.0 (5978) [Twinkly_37EFF1._post] , {"mode":"off"}, {"X-Auth-Token":"RlUGEMhNU34=","Content-Type":"application/json"} 2020-12-12 21:53:17.836 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:53:17.865 - debug: twinkly.0 (5978) [sendPostHTTP] {"code":1000} 2020-12-12 21:53:43.989 - debug: twinkly.0 (5978) Start polling... 2020-12-12 21:53:43.990 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.on 2020-12-12 21:53:43.991 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.mode 2020-12-12 21:53:43.992 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:53:43.992 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:53:44.014 - debug: twinkly.0 (5978) [sendGetHTTP] {"mode":"off","shop_mode":0,"code":1000} 2020-12-12 21:53:44.016 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.bri 2020-12-12 21:53:44.017 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:53:44.018 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:53:44.045 - debug: twinkly.0 (5978) [sendGetHTTP] {"value":100,"mode":"disabled","code":1000} 2020-12-12 21:53:44.047 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.name 2020-12-12 21:53:44.047 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:53:44.048 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:53:44.070 - debug: twinkly.0 (5978) [sendGetHTTP] {"name":"Twinkly_37EFF1","code":1000} 2020-12-12 21:53:44.072 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.details 2020-12-12 21:53:44.072 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:53:44.073 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:53:44.094 - debug: twinkly.0 (5978) [sendGetHTTP] {"product_name":"Twinkly","hardware_version":"100","bytes_per_led":4,"hw_id":"37eff0","flash_size":64,"led_type":12,"product_code":"TWS250SPP","fw_family":"G","device_name":"Twinkly_37EFF1","uptime":"76135703","mac":"98:f4:ab:37:ef:f1","uuid":"","max_supported_led":1200,"number_of_led":250,"led_profile":"RGBW","frame_rate":19,"measured_frame_rate":21.28,"movie_capacity":992,"wire_type":1,"copyright":"LEDWORKS 2018","code":1000} 2020-12-12 21:53:44.096 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.firmware 2020-12-12 21:53:44.097 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:53:44.098 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:53:44.122 - debug: twinkly.0 (5978) [sendGetHTTP] {"version":"2.5.9","code":1000} 2020-12-12 21:53:44.125 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.timer 2020-12-12 21:53:44.126 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:53:44.127 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:53:44.169 - debug: twinkly.0 (5978) [sendGetHTTP] {"time_now":78819,"time_on":-1,"time_off":-1,"code":1000} 2020-12-12 21:53:44.170 - debug: twinkly.0 (5978) Finished polling... Polling alle 60s 2020-12-12 21:59:45.104 - debug: twinkly.0 (5978) Start polling... 2020-12-12 21:59:45.105 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.on 2020-12-12 21:59:45.105 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.mode 2020-12-12 21:59:45.105 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:59:45.106 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:59:45.127 - debug: twinkly.0 (5978) [sendGetHTTP] {"mode":"off","shop_mode":0,"code":1000} 2020-12-12 21:59:45.128 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.bri 2020-12-12 21:59:45.129 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:59:45.129 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:59:45.153 - debug: twinkly.0 (5978) [sendGetHTTP] {"value":100,"mode":"disabled","code":1000} 2020-12-12 21:59:45.154 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.name 2020-12-12 21:59:45.155 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:59:45.155 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:59:45.171 - debug: twinkly.0 (5978) [sendGetHTTP] {"name":"Twinkly_37EFF1","code":1000} 2020-12-12 21:59:45.172 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.details 2020-12-12 21:59:45.173 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:59:45.173 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:59:45.197 - debug: twinkly.0 (5978) [sendGetHTTP] {"product_name":"Twinkly","hardware_version":"100","bytes_per_led":4,"hw_id":"37eff0","flash_size":64,"led_type":12,"product_code":"TWS250SPP","fw_family":"G","device_name":"Twinkly_37EFF1","uptime":"76496804","mac":"98:f4:ab:37:ef:f1","uuid":"","max_supported_led":1200,"number_of_led":250,"led_profile":"RGBW","frame_rate":19,"measured_frame_rate":21.28,"movie_capacity":992,"wire_type":1,"copyright":"LEDWORKS 2018","code":1000} 2020-12-12 21:59:45.199 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.firmware 2020-12-12 21:59:45.199 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:59:45.200 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:59:45.217 - debug: twinkly.0 (5978) [sendGetHTTP] {"version":"2.5.9","code":1000} 2020-12-12 21:59:45.218 - debug: twinkly.0 (5978) Polling Twinkly_37EFF1.timer 2020-12-12 21:59:45.218 - debug: twinkly.0 (5978) [Twinkly_37EFF1._get] 2020-12-12 21:59:45.218 - debug: twinkly.0 (5978) [Twinkly_37EFF1.ensure_token] Authentication token still valid (2020-12-13 1:52:43) 2020-12-12 21:59:45.234 - debug: twinkly.0 (5978) [sendGetHTTP] {"time_now":79180,"time_on":-1,"time_off":-1,"code":1000} 2020-12-12 21:59:45.235 - debug: twinkly.0 (5978) Finished polling...

Habe mal wieder etwas gebastelt. In der Hauptansicht werden die wichtigsten Daten der USVen angezeigt. Durch berühren des oberen Feldes Standort wird die Maske auf die nächste USV gewechselt. Alle Daten werden grafisch noch als Kurve dargestellt. [image: 1607157456350-start_1.jpg] [image: 1607157393979-start_2.jpg] Das Feld "Tankstelle" zeigt die günstigste Tankmöglichkeit in der Nähe an. Wenn man dieses Feld berührt, wird ein Popup mit weiteren Tankstellen in der Nähe eingeblendet. [image: 1607157570408-popup_1.jpg] Leider ist es mir noch nicht glungen, eine eigene feste Position des Popup-Fensters festzulegen. Es wir immer mittig plaziert. (Auf dem Tablet ist das x zu schliessen ganz oben am Rand).